- Move all of the code responsible for transmitting log messages into a
separate function, fprintlog_write().
- Instead of manually modifying a list of iovecs, add a structure
iovlist with some helper functions.
- Alter the F_FORW (UDP message forwarding) case to also use iovecs like
the other cases. Use sendmsg() instead of sendto().
- In the case of F_FORW, truncate the message to a size dependent on the
address family (AF_INET, AF_INET6), as proposed by RFC 5426.
- Move all traditional message formatting into fprintlog_bsd(). Get rid
of some of the string copying and snprintf()'ing. Simply emit more
iovecs to get the job done.
- Increase ttymsg()'s limit of 7 iovecs to 32. Add a definition for this
limit, so it can be reused by iovlist.
- Add fprintlog_rfc5424() to emit RFC 5424 formatted log entries.
- Add a "-O" command line option to enable RFC 5424 formatting. It would
have been nicer if we supported "-o rfc5424", just like on NetBSD.
Unfortunately, the "-o" flag is already used for a different purpose
on FreeBSD.
- Don't truncate hostnames in the RFC 5424 case, as suggested by that
specific RFC.
For people interested in using this, this feature can be enabled by
adding the following line to /etc/rc.conf:
syslogd_flags="-s -O rfc5424"
Differential Revision: https://reviews.freebsd.org/D15011
'bool' is preferred to 'boolean_t'. We only get the boolean_t
definition by header pollution (though the same is true for
bool). Since we use both, switch entirely to bool.
Note: We still have TRUE/FALSE instead of true/false in heavy use in
the rest of the file. These are with ints of various flavors, so
that's appropriate, even though we should eventually migrate to bool
and true/false (though the tables they are in are nicely packed with
short and wouldn't be so nicely packed with bool, another reason
to leave it alone for now).
COP allows fine-grained control on whether to offload a TCP connection
using t4_tom, and what settings to apply to a connection selected for
offload. t4_tom must still be loaded and IFCAP_TOE must still be
enabled for full TCP offload to take place on an interface. The
difference is that IFCAP_TOE used to be the only knob and would enable
TOE for all new connections on the inteface, but now the driver will
also consult the COP, if any, before offloading to the hardware TOE.
A policy is a plain text file with any number of rules, one per line.
Each rule has a "match" part consisting of a socket-type (L = listen,
A = active open, P = passive open, D = don't care) and a pcap-filter(7)
expression, and a "settings" part that specifies whether to offload the
connection or not and the parameters to use if so. The general format
of a rule is: [socket-type] expr => settings
Example. See cxgbetool(8) for more information.
[L] ip && port http => offload
[L] port 443 => !offload
[L] port ssh => offload
[P] src net 192.168/16 && dst port ssh => offload !nagle !timestamp cong newreno
[P] dst port ssh => offload !nagle ecn cong tahoe
[P] dst port http => offload
[A] dst port 443 => offload tls
[A] dst net 192.168/16 => offload !timestamp cong highspeed
The driver processes the rules for each new listen, active open, or
passive open and stops at the first match. There is an implicit rule at
the end of every policy that prohibits offload when no rule in the
policy matches:
[D] all => !offload
This is a reworked and expanded version of a patch submitted by
Krishnamraju Eraparaju @ Chelsio.
Sponsored by: Chelsio Communications
Trampoline mappings are better treated as global since they are valid
in all address spaces, even for PTI. pmap_invalidate_range() must work
on global mappings for pti since kernel_pmap invalidations are really
same as for non-PTI.
Reviewed by: alc, markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D15052
[X86] Add 'sahf' CPU feature to frontend
Summary:
Make clang accept `-msahf` (and `-mno-sahf`) flags to activate the
`+sahf` feature for the backend, for bug 36028 (Incorrect use of
pushf/popf enables/disables interrupts on amd64 kernels). This was
originally submitted in bug 36037 by Jonathan Looney
<jonlooney@gmail.com>.
As described there, GCC also uses `-msahf` for this feature, and the
backend already recognizes the `+sahf` feature. All that is needed is
to teach clang to pass this on to the backend.
The mapping of feature support onto CPUs may not be complete; rather,
it was chosen to match LLVM's idea of which CPUs support this feature
(see lib/Target/X86/X86.td).
I also updated the affected test case (CodeGen/attr-target-x86.c) to
match the emitted output.
Reviewers: craig.topper, coby, efriedma, rsmith
Reviewed By: craig.topper
Subscribers: emaste, cfe-commits
Differential Revision: https://reviews.llvm.org/D43394
Pull in r328944 from upstream llvm trunk (by Chandler Carruth):
[x86] Expose more of the condition conversion routines in the public
API for X86's instruction information. I've now got a second patch
under review that needs these same APIs. This bit is nicely
orthogonal and obvious, so landing it. NFC.
Pull in r329414 from upstream llvm trunk (by Craig Topper):
[X86] Merge itineraries for CLC, CMC, and STC.
These are very simple flag setting instructions that appear to only
be a single uop. They're unlikely to need this separation.
Pull in r329657 from upstream llvm trunk (by Chandler Carruth):
[x86] Introduce a pass to begin more systematically fixing PR36028
and similar issues.
The key idea is to lower COPY nodes populating EFLAGS by scanning the
uses of EFLAGS and introducing dedicated code to preserve the
necessary state in a GPR. In the vast majority of cases, these uses
are cmovCC and jCC instructions. For such cases, we can very easily
save and restore the necessary information by simply inserting a
setCC into a GPR where the original flags are live, and then testing
that GPR directly to feed the cmov or conditional branch.
However, things are a bit more tricky if arithmetic is using the
flags. This patch handles the vast majority of cases that seem to
come up in practice: adc, adcx, adox, rcl, and rcr; all without
taking advantage of partially preserved EFLAGS as LLVM doesn't
currently model that at all.
There are a large number of operations that techinaclly observe
EFLAGS currently but shouldn't in this case -- they typically are
using DF. Currently, they will not be handled by this approach.
However, I have never seen this issue come up in practice. It is
already pretty rare to have these patterns come up in practical code
with LLVM. I had to resort to writing MIR tests to cover most of the
logic in this pass already. I suspect even with its current amount
of coverage of arithmetic users of EFLAGS it will be a significant
improvement over the current use of pushf/popf. It will also produce
substantially faster code in most of the common patterns.
This patch also removes all of the old lowering for EFLAGS copies,
and the hack that forced us to use a frame pointer when EFLAGS copies
were found anywhere in a function so that the dynamic stack
adjustment wasn't a problem. None of this is needed as we now lower
all of these copies directly in MI and without require stack
adjustments.
Lots of thanks to Reid who came up with several aspects of this
approach, and Craig who helped me work out a couple of things
tripping me up while working on this.
Differential Revision: https://reviews.llvm.org/D45146
Pull in r329673 from upstream llvm trunk (by Chandler Carruth):
[x86] Model the direction flag (DF) separately from the rest of
EFLAGS.
This cleans up a number of operations that only claimed te use EFLAGS
due to using DF. But no instructions which we think of us setting
EFLAGS actually modify DF (other than things like popf) and so this
needlessly creates uses of EFLAGS that aren't really there.
In fact, DF is so restrictive it is pretty easy to model. Only STD,
CLD, and the whole-flags writes (WRFLAGS and POPF) need to model
this.
I've also somewhat cleaned up some of the flag management instruction
definitions to be in the correct .td file.
Adding this extra register also uncovered a failure to use the
correct datatype to hold X86 registers, and I've corrected that as
necessary here.
Differential Revision: https://reviews.llvm.org/D45154
Together, these should ensure clang does not use pushf/popf sequences to
save and restore flags, avoiding problems with unrelated flags (such as
the interrupt flag) being restored unexpectedly.
Requested by: jtl
PR: 225330
MFC after: 1 week
While Arcnet has some continued deployment in industrial controls, the
lack of drivers for any of the PCI, USB, or PCIe NICs on the market
suggests such users aren't running FreeBSD.
Evidence in the PR database suggests that the cm(4) driver (our sole
Arcnet NIC) was broken in 5.0 and has not worked since.
PR: 182297
Reviewed by: jhibbits, vangyzen
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15057
The change makes the user and kernel address spaces on i386
independent, giving each almost the full 4G of usable virtual addresses
except for one PDE at top used for trampoline and per-CPU trampoline
stacks, and system structures that must be always mapped, namely IDT,
GDT, common TSS and LDT, and process-private TSS and LDT if allocated.
By using 1:1 mapping for the kernel text and data, it appeared
possible to eliminate assembler part of the locore.S which bootstraps
initial page table and KPTmap. The code is rewritten in C and moved
into the pmap_cold(). The comment in vmparam.h explains the KVA
layout.
There is no PCID mechanism available in protected mode, so each
kernel/user switch forth and back completely flushes the TLB, except
for the trampoline PTD region. The TLB invalidations for userspace
becomes trivial, because IPI handlers switch page tables. On the other
hand, context switches no longer need to reload %cr3.
copyout(9) was rewritten to use vm_fault_quick_hold(). An issue for
new copyout(9) is compatibility with wiring user buffers around sysctl
handlers. This explains two kind of locks for copyout ptes and
accounting of the vslock() calls. The vm_fault_quick_hold() AKA slow
path, is only tried after the 'fast path' failed, which temporary
changes mapping to the userspace and copies the data to/from small
per-cpu buffer in the trampoline. If a page fault occurs during the
copy, it is short-circuit by exception.s to not even reach C code.
The change was motivated by the need to implement the Meltdown
mitigation, but instead of KPTI the full split is done. The i386
architecture already shows the sizing problems, in particular, it is
impossible to link clang and lld with debugging. I expect that the
issues due to the virtual address space limits would only exaggerate
and the split gives more liveness to the platform.
Tested by: pho
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D14633
By popular demand, pkg now walks thought the arguments passed and
if it finds -y or --yes it does accept those as equivalent of
ASSUME_ALWAYS_YES env var.
Requested by: many
MFC after: 1 week
Highlights:
- Passing "-" to -o will now cause output to go to stdout
- Path-based syntactic sugar for overlays is now accepted. This looks like:
/dts-v1/;
/plugin/;
&{/soc} {
sid: eeprom@1c14000 {
compatible = "allwinner,sun8i-h3-sid";
reg = <0x1c14000 0x400>;
status = "okay";
};
};
MFC after: 3 days
A few glyphs were converted incorrectly:
U+00A6 broken bar - center
U+2022 bullet - center
U+2026 horizontal ellipsis - move to bottom of character cell
xdma(4) interface.
This allows us to switch between Altera mSGDMA or SoftDMA engines used by
atse(4) device.
This also makes atse(4) driver become 25% smaller.
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9618
SoftDMA is a software implementation of DMA engine built using Altera
FIFO component.
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D9620
When we had both groff and mandoc in base, we decided to keep the roff(7)
manpage from groff. when remoing groff, we forgot to install the mandoc version
instead.
This fixes it.
Reported by: trasz
MFC after: 1 week
When the tape position is inside the Early Warning area, the tape
drive will return a sense key of NO SENSE, and an ASC/ASCQ of
0x00,0x02, which means: End-of-partition/medium detected". If
this was in response to a control command like WRITE FILEMARKS,
we correctly translate this as informational status and return
0 from saerror().
Programmable Early Warning should be handled the same way, but
we weren't handling it that way. As a result, if a PEW status
(sense key of NO SENSE, ASC/ASCQ of 0x00,0x07, "Programmable early
warning detected") came back in response to a WRITE FILEMARKS,
we returned an error.
The impact of this was that if an application was writing to a
sa(4) device, and a PEW area was set (in the Device Configuration
Extension subpage -- mode page 0x10, subpage 1), and a filemark
needed to be written on close, we could wind up returning an error
to the user on close because of a "failure" to write the filemarks.
It actually isn't a failure, but rather just a status report from
the drive, and shouldn't be treated as a failure.
sys/cam/scsi/scsi_sa.c:
For control commands in saerror(), treat asc/ascq 0x00,0x07
the same as 0x00,{0-5} -- not an error. Return 0, since
the command actually did succeed.
Reported by: Dr. Andreas Haakh <andreas@haakh.de>
Tested by: Dr. Andreas Haakh <andreas@haakh.de>
Sponsored by: Spectra Logic
MFC after: 3 days
given mbuf is considered as not matched.
If mbuf was consumed or freed during handling, we must return
IP_FW_DENY, since ipfw's pfil handler ipfw_check_packet() expects
IP_FW_DENY when mbuf pointer is NULL. This fixes KASSERT panics
when NAT64 is used with INVARIANTS. Also remove unused nomatch_final
field from struct nat64lsn_cfg.
Reported by: Justin Holcomb <justin at justinholcomb dot me>
Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC
The miscellaneous x86 sysent->sv_setregs() implementations tried to
migrate PSL_T from the previous program to the new executed one, but
they evaluated regs->tf_eflags after the whole regs structure was
bzeroed. Make this functional by saving PSL_T value before zeroing.
Note that if the debugger is not attached, executing the first
instruction in the new program with PSL_T set results in SIGTRAP, and
since all intercepted signals are reset to default dispostion on
exec(2), this means that non-debugged process gets killed immediately
if PSL_T is inherited. In particular, since suid images drop
P_TRACED, attempt to set PSL_T for execution of such program would
kill the process.
Another issue with userspace PSL_T handling is that it is reset by
trap(). It is reasonable to clear PSL_T when entering SIGTRAP
handler, to allow the signal to be handled without recursion or
delivery of blocked fault. But it is not reasonable to return back to
the normal flow with PSL_T cleared. This is too late to change, I
think.
Discussed with: bde, Ali Mashtizadeh
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Differential revision: https://reviews.freebsd.org/D14995
This was inadvertently overriding the first found SYSDIR with the last
of /usr/src which could result in the wrong headers being used if not
building from /usr/src.
SYSDIR?= is not used here to avoid evaluating the exists() when unneeded.
Reported by: rgrimes, sjg, Mark Millard
Pointyhat to: bdrewery
Sponsored by: Dell EMC
"Terminus BSD Console" is a derivative of Terminus that is provided
by Mr. Dimitar Zhekov under the 2-clause BSD license for use by the
FreeBSD vt(4) console and other BSDs.
PR: 227409
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
In pti-enabled pmap, the PCID allocation scheme assigns temporal id
for the kernel page table, and user page table twin PCID is
calculating by setting high bit in the kernel PCID. So the kernel AS
is mapped with per-vmspace PCID, and we must completely shut down all
mappings in KVA when switching contexts, so that newly switched thread
would see all changes in KVA occured while it was not executing.
After all, KVA is same between all threads.
Currently the pti context switch for the user part of the page table
gets its TLB entries flushed too. It is excessive. The same PCID
flushing algorithm that is used for non-pti pmap, correctly works for
the UVA mappings. The only shared TLB entries are the pages from KVA
accessed by the kernel entry trampoline. All of them are static
except per-thread TSS and LDT. For TSS and LDT, the lifetime of newly
allocated entries is the whole thread life, so it is fine as well. If
not fine, then explicit shutdowns for current pmap of the newly
allocated LDT and TSS pages would be enough.
Also restore the constant value for the pm_pcid for the kernel_pmap.
Before, for PTI pmap, pm_pcid was erronously rolled same as user
pmap's pm_pcid, but it was not used.
Reviewed by: markj (previous version)
Discussed with: alc
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 month
Differential revision: https://reviews.freebsd.org/D14961
After r331668 handling of F_NOT flag done in one place by
print_instruction() function. Also remove unused argument from
print_ip[6]() functions.
MFC after: 1 week
Some BIOSes have trouble booting from GPT in non-UEFI mode. This is
commonly reported with Lenovo laptops, including my x220. As we do not
currently support booting FreeBSD/i386 via UEFI there's no reason to
prefer GPT.
The "vestigial swap partition" was added in r265017 to work around an
issue with loader's GPT support, so we should not need it when using
MBR.
We may want to make the same change to amd64, although the issue there is
mitigated by such systems booting via UEFI in the common case.
PR: 227422
Reviewed by: gjb
MFC after: 3 weeks
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Originally, on the VAX exect() enable tracing once the new executable
image was loaded. This was possible because tracing was controllable
through user space code by setting the PSL_T flag. The following
instruction is a system call that activated tracing (as all
instructions do) by copying PSL_T to PSL_TP (trace pending). The
first instruction of the new executable image would trigger a trace
fault.
This is not portable to all platforms and the behavior was replaced with
ptrace(PT_TRACE_ME, ...) since FreeBSD forked off of the CSRG repository.
Platforms either incorrectly call execve(), trigger trace faults inside
the original executable, or do contain an implementation of this
function.
The exect() interfaces is deprecated or removed on NetBSD and OpenBSD.
Submitted by: Ali Mashtizadeh <ali@mashtizadeh.com>
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D14989
mdoc treats verbatim quotes in .Dl as a string delimiter and does
not pass them to the rendered output. Use special char \*q to specify
double quote
PR: 216755
MFC after: 3 days
