To keep flow format uniform with ice, this patch adds support for
this RSS rule:
flow create 0 ingress pattern eth / ipv6 / ipv6_frag_ext / end \
actions rss types ipv6-frag end queues end queues end / end
Fixes: ef4c16fd9148 ("net/i40e: refactor RSS flow")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
In some cases Tx descriptors may be uncompleted by the HW and as a
result they will never be released.
This patch adds checking for the missing Tx completions to the ENA timer
service, so in order to use this feature, the application must call the
function rte_timer_manage().
Missing Tx completion reset threshold is determined dynamically, by
taking into consideration ring size and the default value.
Tx cleanup is associated with the Tx burst function. As DPDK
applications can call Tx burst function dynamically, time when last
cleanup was called must be traced to avoid false detection of the
missing Tx completion.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
Only the IO rings memory was allocated with taking the socket ID into
the respect, while the other structures was allocated using the regular
rte_zmalloc() API.
Ring specific structures are now being allocated using the ring's
socket ID.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
The caller can pass Tx or Rx free threshold value to the configuration
structure for each ring. It determines when the Tx/Rx function should
start cleaning up/refilling the descriptors. ENA was ignoring this value
and doing it's own calculations.
Now the user can configure ENA's behavior using this parameter and if
this variable won't be set, the ENA will continue with the old behavior
and will use it's own threshold value.
The default value is not provided by the ENA in the ena_infos_get(), as
it's being determined dynamically, depending on the requested ring size.
Note that NULL check for Tx conf was removed from the function
ena_tx_queue_setup(), as at this place the configuration will be
either provided by the user or the default config will be used and it's
handled by the upper (rte_ethdev) layer.
Tx threshold shouldn't be used for the Tx cleanup budget as it can be
inadequate to the used burst. Now the PMD tries to release mbufs for the
ring until it will be depleted.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Reviewed-by: Igor Chauskin <igorch@amazon.com>
Reviewed-by: Shai Brandes <shaibran@amazon.com>
In sfc, MAE admin serves as a transfer proxy. In order to track which
ethdev is privileged, augment every independent switch port structure
with information about its MAE privilege.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Removing 'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag.
Instead of drivers announce this capability, application can deduct the
capability by checking reported 'dev_info.max_mtu' or
'dev_info.max_rx_pktlen'.
And instead of application setting this flag explicitly to enable jumbo
frames, this can be deduced by driver by comparing requested 'mtu' to
'RTE_ETHER_MTU'.
Removing this additional configuration for simplification.
Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
There is a confusion on setting max Rx packet length, this patch aims to
clarify it.
'rte_eth_dev_configure()' API accepts max Rx packet size via
'uint32_t max_rx_pkt_len' field of the config struct 'struct
rte_eth_conf'.
Also 'rte_eth_dev_set_mtu()' API can be used to set the MTU, and result
stored into '(struct rte_eth_dev)->data->mtu'.
These two APIs are related but they work in a disconnected way, they
store the set values in different variables which makes hard to figure
out which one to use, also having two different method for a related
functionality is confusing for the users.
Other issues causing confusion is:
* maximum transmission unit (MTU) is payload of the Ethernet frame. And
'max_rx_pkt_len' is the size of the Ethernet frame. Difference is
Ethernet frame overhead, and this overhead may be different from
device to device based on what device supports, like VLAN and QinQ.
* 'max_rx_pkt_len' is only valid when application requested jumbo frame,
which adds additional confusion and some APIs and PMDs already
discards this documented behavior.
* For the jumbo frame enabled case, 'max_rx_pkt_len' is an mandatory
field, this adds configuration complexity for application.
As solution, both APIs gets MTU as parameter, and both saves the result
in same variable '(struct rte_eth_dev)->data->mtu'. For this
'max_rx_pkt_len' updated as 'mtu', and it is always valid independent
from jumbo frame.
For 'rte_eth_dev_configure()', 'dev->data->dev_conf.rxmode.mtu' is user
request and it should be used only within configure function and result
should be stored to '(struct rte_eth_dev)->data->mtu'. After that point
both application and PMD uses MTU from this variable.
When application doesn't provide an MTU during 'rte_eth_dev_configure()'
default 'RTE_ETHER_MTU' value is used.
Additional clarification done on scattered Rx configuration, in
relation to MTU and Rx buffer size.
MTU is used to configure the device for physical Rx/Tx size limitation,
Rx buffer is where to store Rx packets, many PMDs use mbuf data buffer
size as Rx buffer size.
PMDs compare MTU against Rx buffer size to decide enabling scattered Rx
or not. If scattered Rx is not supported by device, MTU bigger than Rx
buffer size should fail.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Huisong Li <lihuisong@huawei.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
The device name should be 82574L Gigabit Ethernet Controller.
The patch also remove a redundant "*".
Fixes: fc1f2750a3ec ("doc: programmers guide")
Cc: stable@dpdk.org
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
The driver may change offloads info into dev->data->dev_conf
in dev_configure which may cause apps use outdated values.
Add a new API to get actual device configuration.
Signed-off-by: Jie Wang <jie1x.wang@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
RTE IPv4 header definition combines the `version' and `ihl' fields
into a single structure member.
This patch introduces dedicated structure members for both `version'
and `ihl' IPv4 fields. Separated header fields definitions allow to
create simplified code to match on the IHL value in a flow rule.
The original `version_ihl' structure member is kept for backward
compatibility.
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
IPv4 header encodes fragment information into 16 bits field.
3 bits hold flags and remaining 13 bits are for fragment offset.
13 bits bit-field cannot be defined both for big and little endian
systems.
The patch removes IPv4 fragments union announce.
Fixes: f7383e7c7ec1 ("net: announce changes in IPv4 header access")
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Add 'display-xstats' option for using in accompanying with Rx/Tx statistics
(i.e. 'stats-period' option or 'show port stats' interactive command) to
display specified list of extended statistics.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The generic modify field flow action introduced in [1] has
some issues related to the immediate source operand:
- immediate source can be presented either as an unsigned
64-bit integer or pointer to data pattern in memory.
There was no explicit pointer field defined in the union.
- the byte ordering for 64-bit integer was not specified.
Many fields have shorter lengths and byte ordering
is crucial.
- how the bit offset is applied to the immediate source
field was not defined and documented.
- 64-bit integer size is not enough to provide IPv6
addresses.
In order to cover the issues and exclude any ambiguities
the following is done:
- introduce the explicit pointer field
in rte_flow_action_modify_data structure
- replace the 64-bit unsigned integer with 16-byte array
- update the modify field flow action documentation
Appropriate deprecation notice has been removed.
[1] commit 73b68f4c54a0 ("ethdev: introduce generic modify flow action")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Not all DPDK ports in a given switching domain may have the
privilege to manage "transfer" flows. Add an API to find a
port with sufficient privileges by any port in the domain.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Add support for item PORT_REPRESENTOR which should
be used instead of ambiguous item PORT_ID.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Action PORT_ID implementation assumes ingress only. Its semantics
suggests that support for equal action PORT_REPRESENTOR be added.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Semantics of the existing support for action PORT_ID suggests
that support for equal action REPRESENTED_PORT be implemented.
Helper functions keep port_id suffix since action
MLX5_FLOW_ACTION_PORT_ID is still used internally.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for actions PORT_REPRESENTOR and REPRESENTED_PORT
based on the existing support for action PORT_ID.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Add support for actions PORT_REPRESENTOR and REPRESENTED_PORT
based on the existing support for action PORT_ID.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for items PORT_REPRESENTOR and REPRESENTED_PORT
based on the existing support for item PORT_ID.
The use of item PORT_ID depends on the specified direction attribute.
Items PORT_REPRESENTOR and REPRESENTED_PORT, in turn, define traffic
direction themselves. The former matches traffic from the driver's
vNIC. The latter matches packets from either a v-port (network) or
a VF's vNIC (if the driver's port is a VF representor).
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Attributes "ingress" and "egress" can only apply unambiguosly
to non-"transfer" flows. In "transfer" flows, the standpoint
is effectively shifted to the embedded switch. There can be
many different endpoints connected to the switch, so the
use of "ingress" / "egress" does not shed light on which
endpoints precisely can be considered as traffic sources.
Add relevant deprecation notices and suggest the use of precise
traffic source items (PORT_REPRESENTOR and REPRESENTED_PORT).
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
PF, VF and PHY_PORT require that applications have extra
knowledge of the underlying NIC and thus are hard to use.
Also, the corresponding items depend on the direction
attribute (ingress / egress), which complicates their
use in applications and interpretation in PMDs.
The concept of PORT_ID is ambiguous as it doesn't say whether
the port in question is an ethdev or the represented entity.
Items and actions PORT_REPRESENTOR, REPRESENTED_PORT
should be used instead.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
For use in "transfer" flows. Supposed to send matching traffic to the
entity represented by the given ethdev, at embedded switch level.
Such an entity can be a network (via a network port), a guest
machine (via a VF) or another ethdev in the same application.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
For use in "transfer" flows. Supposed to send matching traffic to
the given ethdev (to the application), at embedded switch level.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
For use in "transfer" flows. Supposed to match traffic entering the
embedded switch from the entity represented by the given ethdev.
Such an entity can be a network (via a network port), a guest
machine (via a VF) or another ethdev in the same application.
Must not be combined with direction attributes.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
For use in "transfer" flows. Supposed to match traffic
entering the embedded switch from the given ethdev.
Must not be combined with direction attributes.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Move rte_eth_dev, rte_eth_dev_data, rte_eth_rxtx_callback and related
data into private header (ethdev_driver.h).
Few minor changes to keep DPDK building after that.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
Introduce rte_eth_macaddrs_get() to allow user to retrieve all ethernet
addresses assigned to given port.
Change testpmd to use this new function and avoid referencing directly
rte_eth_devices[].
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
Currently majority of fast-path ethdev ops take pointers to internal
queue data structures as an input parameter.
While eth_rx_queue_count() takes a pointer to rte_eth_dev and queue
index.
For future work to hide rte_eth_devices[] and friends it would be
plausible to unify parameters list of all fast-path ethdev ops.
This patch changes eth_rx_queue_count() to accept pointer to internal
queue data as input parameter.
While this change is transparent to user, it still counts as an ABI change,
as eth_rx_queue_count_t is used by ethdev public inline function
rte_eth_rx_queue_count().
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
GROUP is an in-house term for so-called "tunnel_match" flows.
On parsing, they are detected by virtue of PMD-internal item
MARK. It associates a given flow with its tunnel context.
Such a flow is represented by a MAE action rule which is
chained with the corresponding JUMP rule's outer rule
by virtue of matching on its recirculation ID.
GROUP flows do narrower match than JUMP flows do and
decapsulate matching packets (full offload).
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
JUMP is an in-house term for so-called "tunnel_set" flows. On parsing,
they are identified by virtue of actions MARK (PMD-internal) and JUMP.
The action MARK associates a given flow with its tunnel context.
Such a flow is represented by a MAE outer rule (OR) which has its
recirculation ID set. This ID is also associated with the tunnel
context. The OR is supposed to set this ID in 8 high bits of
Rx mark in matching packets. It also counts the packets.
Packets that hit the OR but miss in action rule (AR) table,
should go to MAE admin PF (that is, to DPDK) by default.
Support for the use of action COUNT in JUMP
flows will be introduced by later patches.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Provide an API to let the application control the NIC's ability
to deliver specific kinds of per-packet metadata to the PMD.
Checks for the NIC's ability to set these kinds of metadata
in the first place (support for the flow actions) belong in
flow API responsibility domain (flow validate mechanism).
This topic is out of scope of the new API in question.
The PMD's ability to deliver received metadata to the user
by virtue of mbuf fields should be covered by mbuf library.
It is also out of scope of the new API in question.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Support of the keep-CRC offloading by checking
the relevant FW capability (scatter_fcs) for NIC support.
Supported offload:
DEV_RX_OFFLOAD_KEEP_CRC
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Tested-by: Idan Hackmon <idanhac@nvidia.com>
Support of the VLAN stripping offloading by checking
the relevant FW capability (vlan_cap) for NIC support.
Supported offload:
DEV_RX_OFFLOAD_VLAN_STRIP
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Tested-by: Idan Hackmon <idanhac@nvidia.com>
Support of the TSO offloading by checking
the relevant FW capability for NIC support.
Supported offloads:
DEV_TX_OFFLOAD_TCP_TSO
DEV_TX_OFFLOAD_VXLAN_TNL_TSO
DEV_TX_OFFLOAD_GRE_TNL_TSO
DEV_TX_OFFLOAD_GENEVE_TNL_TSO
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Tested-by: Idan Hackmon <idanhac@nvidia.com>
Indirect actions should be used to do shared counters.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Let the driver provide the user with information about available
representors by implementing the representor_info_get operation.
Due to the lack of any structure to representor IDs, every ID range
describes exactly one representor.
Signed-off-by: Viacheslav Galaktionov <viacheslav.galaktionov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Provide minimal implementation for port representors that only can be
configured and can provide device information.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Add the argument that allows user to choose either switchdev or legacy
mode. Legacy mode enables switching by using Ethernet virtual bridging
(EVB) API. In switchdev mode, VF traffic goes via port representor
(if any) on PF, and software virtual switch (for example, Open vSwitch)
steers the traffic.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
rte_eth_rx_descriptor_status() should be used as a replacement.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add a new cmdline to help diagnostic the bonding mode 4 in testpmd.
Show the lacp information about the bonded device and its slaves:
show bonding lacp info <bonded device port_id>
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Since the AF_XDP PMD does not work for secondary processes as reported
in Bugzilla 805, check for the process type at the beginning of probe
and return ENOTSUP if the process type is secondary.
It is planned that secondary processes will be supported by the PMD in
full in a future release by using rte_mp_msg to pass the state to the
secondary process that it requires in order to work.
Bugzilla ID: 805
Fixes: f1debd77efaf ("net/af_xdp: introduce AF_XDP PMD")
Cc: stable@dpdk.org
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
With data input, output and harq also supported in big
endian format, this patch updates the testbbdev application
to handle the endianness conversion as directed by the
the driver being used.
The test vectors assumes the data in the little endian order, and
thus if the driver supports big endian data processing, conversion
from little endian to big is handled by the testbbdev application.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
Add support for enqueue and dequeue the LDPC enc/dec
from the modem device.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
This patch add support for multiple modems by assigning
a modem id as dev args in vdev creation.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
This patch adds dev args to take max queues as input
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Nicolas Chautru <nicolas.chautru@intel.com>
Added device information to capture explicitly the assumption
of the input/output data byte endianness being processed.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
This patch add raw vector API framework for dpaa_sec driver.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
