The following commit has added a number of existing offload flags such
as PKT_TX_IPV4 and PKT_TX_IPV6 to PKT_TX_OFFLOAD_MASK defined in
rte_mbuf.h. That change breaks the enic driver's Tx prepare handler.
commit ef28cfa73822 ("mbuf: fix Tx offload mask")
The enic driver keeps the supported offload flags in a local variable
(tx_offload_mask), which is strictly a subset of
PKT_TX_OFFLOAD_MASK. This variable is then used to compute the
unsupported flags (tx_offload_notsup_mask), and the Tx prepare handler
(tx_pkt_prepare) uses it to reject packets with unsupported offload
flags.
As is, tx_offload_notsup_mask ends up containing flags like
PKT_TX_IPV4 that are actually supported by the driver, which then
breaks any application that uses checksum offloads and calls the Tx
prepare handler. So add the flags to tx_offload_mask that the driver
supports but were missing in PKT_TX_OFFLOAD_MASK.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
The handler for dev_supported_ptypes_get currently returns null when
the vectorized Rx handler is used. It is also missing tunnel packet
types. Add the missing packet types to the supported list, and return
the right list for the vectorized Rx handler.
Fixes: 8a6ff33d6d36 ("net/enic: add AVX2 based vectorized Rx handler")
Fixes: 93fb21fdbe23 ("net/enic: enable overlay offload for VXLAN and GENEVE")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Fixes: edbed86d1cc3 ("examples/vdpa: introduce a new sample for vDPA")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Trivial pelling errors found by codespell.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Promisc should not be disabled if the all multicast mode is enabled.
Patch keeps the promiscuous on if all multicast mode is on, this
behavior is also consistent with the implementation done on ixgbe
pmd.
Cc: stable@dpdk.org
Signed-off-by: Huaibin Wang <huaibin.wang@6wind.com>
Signed-off-by: Laurent Hardy <laurent.hardy@6wind.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If user explicitly requested memory to be allocated from a socket via
`port-numa-config` and `ring-numa-config`, and if that socket is
valid, add that socket into socket_ids[] so that mempool allocated for
that socket.
Fixes: dbfb8ec7094c ("app/testpmd: optimize mbuf pool allocation")
Cc: stable@dpdk.org
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In the case the device is created by the primary process,
the secondary must request some file descriptors to attach the queues.
The file descriptors are shared via IPC Unix socket.
Thanks to the IPC synchronization, the secondary process
is now able to do Rx/Tx on a TAP created by the primary process.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
fd's cannot be shared between processes, and each process need to have
it's own fd's pointer.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Port and queue ids are added to easily map the file
descriptors stored in each process private.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The atomic functions smp_load_acquire() and smp_store_release()
were introduced in Linux 3.14. Older kernels miss the functions:
kni_fifo.h:19:2: error:
implicit declaration of function ‘smp_load_acquire’
kni_fifo.h:30:2: error:
implicit declaration of function ‘smp_store_release’
The fallback is to drop the atomic barrier, as it was before
the commit below.
Fixes: 711859cd0d07 ("kni: fix kernel FIFO synchronization")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
main.c(376): error #592: variable "lcore_id" is used before its value is set
RTE_SET_USED(lcore_id);
^
The variables were voided with RTE_SET_USED without an obvious reason.
Removing these voidings should avoid the icc error.
Fixes: a137d012 ("examples/l3fwd-power: support traffic pattern aware control")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
When no-huge mode is enabled, we always overwrite the socket ID to be
SOCKET_ID_ANY in rte_malloc, because there is no NUMA awareness in no-huge
mode. However, with external memory support, a socket ID may have other
meaning, and we cannot overwrite the socket ID in those cases.
Fixes: 65ff37b105f7 ("malloc: add function to check if socket is external")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add read-write concurrency test to meson and autotest
file.
Fixes: 0eb3726ebcf1 ("test/hash: add test for read/write concurrency")
Cc: stable@dpdk.org
Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com>
The hash scaling unit test is not really needed
any more since the multi-writer is supported now
inside the library and it is tested by multi-writer
unit test.
Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit improves the readwrite test to consider
extendable table feature.
Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit improves the readwrite unit test to cover
more corner cases and reduces the testing time by
reducing the total key count.
Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
With sequential key, the test will cover more corner
cases with jhash instead of crc hash, since jhash
generates more random hash pattern on sequential key.
It is useful for functional verification.
Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com>
There is a rte_pause in hash table reset function.
Since the loop is not a polling loop on shared
data structure, the rte_pause is not needed.
Fixes: b26473ff8f4a ("hash: add reset function")
Cc: stable@dpdk.org
Signed-off-by: Yipeng Wang <yipeng1.wang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Check the prerequisites to run the test
1.checked whether the rte_kni module is loaded, if not fail testcase
2.checked whether the rte_kni module is loaded with loop back mode,
if not skip packet forwarding testcase and log
3.Disabled the test in freebsd as test is not supported
Fixes: 5233e5924a ("app/test: update kni")
Cc: stable@dpdk.org
Signed-off-by: Naga Suresh Somarowthu <naga.sureshx.somarowthu@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The worker threads incrementing the rx/tx_packets race with the signal
handler from the main thread zeroing the entire statistics structure.
This can cause the statistics to fail to be zeroed, even when there
is no traffic on those interfaces.
Improve zeroing the statistics by only incrementing rx/tx_packets
in worker threads by a non-zero amount. This limits the race to the
periods in which traffic is actually being received or transmitted.
Signed-off-by: Dan Gora <dg@adax.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add logging messages showing the commands necessary for the user to
have the application display and zero the statistics.
Signed-off-by: Dan Gora <dg@adax.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Update KNI example to add the command line flag '-m' to enable
a function to continuously monitor the Ethernet link status of
the physical link and update the link status of the corresponding
interfaces with rte_kni_update_link().
Signed-off-by: Dan Gora <dg@adax.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add module parameter 'carrier='on|off' to set the default carrier state
for linux network interfaces created by the KNI module. The default
carrier state is 'off'.
For KNI interfaces which need to reflect the carrier state of
a physical Ethernet port controlled by the DPDK application, the
default carrier state should be left set to 'off'. The application
can set the carrier state of the KNI interface to reflect the state
of the physical Ethernet port using rte_kni_update_link().
For KNI interfaces which are purely virtual, the default carrier
state can be set to 'on'. This enables the KNI interface to be
used without having to explicity set the carrier state to 'on'
using rte_kni_update_link().
Signed-off-by: Dan Gora <dg@adax.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add a new API function to KNI, rte_kni_update_link() to allow DPDK
applications to update the link status for KNI network interfaces in
the linux kernel.
Signed-off-by: Dan Gora <dg@adax.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Syncing the values by adding c11 atomic memory barriers to make sure
the values being synced before updating fifo_write and fifo_read.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Adding memory barrier to make sure the values being synced
before updating fifo_write in kni_fifo_put and fifo_read in
kni_fifo_get.
Fixes: 3fc5ca2f6352 ("kni: initial import")
Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
With existing code in kni_fifo_put, rx_q values are not being updated
before updating fifo_write. While reading rx_q in kni_net_rx_normal,
This is causing the sync issue on other core. The same situation happens
in kni_fifo_get as well.
So syncing the values by adding memory barriers to make sure the values
being synced before updating fifo_write and fifo_read.
Fixes: 3fc5ca2f6352 ("kni: initial import")
Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Keep only single config option RTE_USE_C11_MEM_MODEL for C11 memory
model, so all modules can leverage C11 atomic extension by enable this
option.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
A Kbuild is also included to allow users to use DKMS natively without
additional code.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The build error observed with Linux kernel 4.19 when KNI ethtool
support enabled (CONFIG_RTE_KNI_KMOD_ETHTOOL=y)
.../build/build/kernel/linux/kni/kni_ethtool.c:193:3:
error: ‘struct ethtool_ops’ has no member named ‘get_settings’;
.get_settings = kni_get_settings,
^~~~~~~~~~~~
.../build/build/kernel/linux/kni/kni_ethtool.c:194:3:
error: ‘struct ethtool_ops’ has no member named ‘set_settings’;
.set_settings = kni_set_settings,
^~~~~~~~~~~~
With kernel 4.19 ethtool_ops `get_settings` & `set_settings` are
replaced with `get_link_ksettings` & `set_link_ksettings`
Commit 9b3004953503 ("ethtool: drop get_settings and set_settings callbacks")
This fix practically removes `get_settings` & `set_settings` support
for the kernel versions that have the new ethtool_ops without
implementing the new ones.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch updates the release notes for added feature of crypto
port and symmetric crypto action.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Add support for rte_pause() implementation for ppc64.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
'OCTEON TX' is the registered name. All other usages need to be fixed.
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Remove unused file from the release notes docs. This file was
used to display a hierarchy in older releases, circa 2015, but
doesn't seem useful in the current structure.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
This patch updates the CLI parsing of softnic with extra symmetric
cryptodev, port, session, and action support.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch adds symmetric crypto action support to softnic.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch enables the crypt port configuration in softnic.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch adds cryptodev abstraction to softnic. The DPDK
Cryptodevs are abstracted as crypto ports in the softnic.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Update document with flow and qos api support in softnic PMD.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Reviewed-by: Marko Kovacevic <marko.kovacevic@intel.com>
Unit tests to check for hash lookup and bulk-lookup perf
with lock-free enabled and with lock-free disabled.
Unit tests performed with readers running in parallel with writers.
Tests include:
- hash lookup on existing keys with:
- hash add causing NO key-shifts of existing keys in the table
- hash lookup on existing keys likely to be on shift-path with:
- hash add causing key-shifts of existing keys in the table
- hash lookup on existing keys NOT likely to be on shift-path with:
- hash add causing key-shifts of existing keys in the table
- hash lookup on non-existing keys with:
- hash add causing NO key-shifts of existing keys in the table
- hash add causing key-shifts of existing keys in the table
- hash lookup on keys likely to be on shift-path with:
- multiple writers causing key-shifts of existing keys in the table
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Yipeng Wang <yipeng1.wang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add lock-free read-write concurrency. This is achieved by the
following changes.
1) Add memory ordering to avoid race conditions. The only race
condition that can occur is - using the key store element
before the key write is completed. Hence, while inserting the element
the release memory order is used. Any other race condition is caught
by the key comparison. Memory orderings are added only where needed.
For ex: reads in the writer's context do not need memory ordering
as there is a single writer.
key_idx in the bucket entry and pdata in the key store element are
used for synchronisation. key_idx is used to release an inserted
entry in the bucket to the reader. Use of pdata for synchronisation
is required due to updation of an existing entry where-in only
the pdata is updated without updating key_idx.
2) Reader-writer concurrency issue, caused by moving the keys
to their alternative locations during key insert, is solved
by introducing a global counter(tbl_chng_cnt) indicating a
change in table.
3) Add the flag to enable reader-writer concurrency during
run time.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Yipeng Wang <yipeng1.wang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Fix the key store array element alignment such that every array
element is aligned on KEY_ALIGNMENT boundary. This is required to
make 'pdata' in 'struct rte_hash_key' align on its natural boundary
for atomic load/store.
Fixes: 473d1bebce43 ("hash: allow to store data in hash table")
Cc: stable@dpdk.org
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Yipeng Wang <yipeng1.wang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
rte_hash_lookup_xxx APIs return the index of slot in
the key store. Application(reader) can use that index to reference
other data structures in its scope. Because of this, the
index should not be freed till the application completes
using the index.
RTE_HASH_EXTRA_FLAGS_NO_FREE_ON_DEL is introduced to support this.
When this flag is enabled rte_hash_del_xxx APIs do not free the
key-store index/internal memory associated with the deleted
entry. The new API rte_hash_free_key_with_position should be called
to free the key-store index/internal memory after calling
rte_hash_del_xxx APIs.
Suggested-by: Yipeng Wang <yipeng1.wang@intel.com>
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Yipeng Wang <yipeng1.wang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
RW concurrency is required with single writer and multiple reader
usecase as well. Hence, multi-writer should not be enabled by default when
RW concurrency is enabled.
Fixes: f2e3001b53ec ("hash: support read/write concurrency")
Cc: stable@dpdk.org
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Yipeng Wang <yipeng1.wang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add meson.build in vm_power_manager and the guest_cli subdirectory.
Building can be achieved by going to the build directory, and using
meson configure -Dexamples=vm_power_manager,vm_power_manager/guest_cli
Then, when ninja is invoked, it will build dpdk-vm_power_manger and
dpdk-guest_cli
Work still needs to be done on the meson build system to handles the case
where the target list of example apps is defined as 'all'. That will come
in a future patch.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Some messages appearing several times a second, removing as they are
unnecessary. Other less severe messages change from INFO to DEBUG
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add JSON string handling to vm_power_manager for JSON strings received
through the fifo. The format of the JSON strings are detailed in the
next patch, the vm_power_manager user guide documentation updates.
This patch introduces a new dependency on Jansson, a C library for
encoding, decoding and manipulating JSON data. To compile the sample app
you now need to have installed libjansson4 and libjansson-dev (these may
be named slightly differently depending on your Operating System)
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
