Don't run symlink-drivers-solibs.sh as part of 'install' because
Windows doesn't support shell scripts.
Fixes: 82ba4416dd ("build: add module definition files for Windows")
Cc: stable@dpdk.org
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Tested-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Add meson build configuration for Graviton2 platform
with 64-bit Arm Neoverse N1 cores. This patch makes the
following changes to generic Neoverse N1 config:
1. increase lcore limit to 64
2. increase memory support to 1TB
3. remove +crc from -march as that is default when setting armv8.2
For more information about Graviton2 platform, refer to:
https://aws.amazon.com/ec2/graviton/
Signed-off-by: Vimal Chungath <vcchunga@amazon.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Note that config/rte_config.h contains several configuration
switches, providing for fine control of the PMD's
runtime behaviour.
The meson infrastructure is expanded as additional files are
added to this patchset.
Adds announcement of availability of the new driver
for Intel Dynamic Load Balancer 1.0 hardware.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Adds the meson build infrastructure, which includes
compile-time constants in rte_config.h. DLB2 is
only supported on Linux 64 bit X86 platforms at this time.
Adds announcement of availability for the new driver
for Intel Dynamic Load Balancer 2.0 hardware.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
DLB supports a total of 256 queues, 128 load balanced queues
and 128 directed queues. Increase RTE_EVENT_MAX_QUEUES_PER_DEV
to max possible uint_8_t max value.
Signed-off-by: Timothy McDaniel <timothy.mcdaniel@intel.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When building kernel modules such as kni, the "config" directory is not
passed as a standard path in the EXTRA_CFLAGS value, meaning that the
rte_compatibility_defines.h is not found from rte_config.h. However, since
both headers are in the same directory, we can just use quotes rather than
angle-brackets to ensure the second header is always found if the first is.
Fixes: b0b672aead ("build: add defines for compatibility with make build")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Use the newer macros defined by meson in all DPDK source code, to ensure
there are no errors when the old non-standard macros are removed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The defines used to indicate what crypto, compression and eventdev drivers
were being built were different to those used in the make build, with meson
defining them with "_PMD" at the end, while make defined them with "_PMD"
in the middle and the specific driver name at the end. This might cause
compatibility issues for applications which used the older defines, which
switching to build against new DPDK releases.
As well as changing the default to match that of make, meson also
special-cases the crypto/compression/event drivers to have both defines
provided. This ensures compatibility for these macros with both meson and
make from older versions.
For a selection of other libraries and drivers, there were other
incompatibilities between the meson and make-defined macros which were not
previously highlighted in a deprecation notice, so we add per-macro
compatibility defines for these to ease the transition from make to meson.
Fixes: 5b9656b157 ("lib: build with meson")
Fixes: 9314afb68a ("drivers: add infrastructure for meson build")
Fixes: dcadbbde8e ("crypto/null: build with meson")
Fixes: 3c32e89f68 ("compress/isal: add skeleton ISA-L compression PMD")
Fixes: eca504f318 ("drivers/event: build skeleton and SW drivers with meson")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Queue stats will be removed from basic stats to xstats.
It will be PMDs responsibility to fill queue stats based on number of
queues they have.
Until all PMDs implement the xstats, a temporary
'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS' device flag created. PMDs switched
to the xstats should clear this flag to bypass the ethdev layer autofill
for queue stats.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Implement terminal handling, input polling, and vdprintf() for Windows.
Because Windows I/O model differs fundamentally from Unix and there is
no concept of character device, polling is simulated depending on the
underlying input device. Supporting non-terminal input is useful for
automated testing.
Windows emulation of VT100 uses "ESC [ E" for newline instead of
standard "ESC E", so add a workaround.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add necessary changes to support new AVX512 specific ACL classify
algorithm:
- changes in meson.build to check that build tools
(compiler, assembler, etc.) do properly support AVX512.
- run-time checks to make sure target platform does support AVX512.
- dummy rte_acl_classify_avx512() for targets where AVX512
implementation couldn't be properly supported.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch enables the optimized calculation of CRC32-Ethernet and
CRC16-CCITT using the AVX512 and VPCLMULQDQ instruction sets. This CRC
implementation is built if the compiler supports the required instruction
sets. It is selected at run-time if the host CPU, again, supports the
required instruction sets.
Signed-off-by: Mairtin o Loingsigh <mairtin.oloingsigh@intel.com>
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
RTE_ARCH_xx flags are used to distinguish platform architectures.
These flags can be used to pick different code paths for different
architectures at compile time.
For Arm platforms, there are 3 flags in use: RTE_ARCH_ARM,
RTE_ARCH_ARMv7 and RTE_ARCH_ARM64.
RTE_ARCH_ARM64 is for 64-bit aarch64 platforms,
and RTE_ARCH_ARM & RTE_ARCH_ARMv7 are for 32-bit platforms.
RTE_ARCH_ARMv7 is for ARMv7 platforms as its name suggested.
The issue is meaning of RTE_ARCH_ARM is not clear enough.
Because no info about platform word length is included in the name.
To make the flag names more clear, a naming scheme is proposed.
RTE_ARCH_ARM (all Arm platforms)
|
+----RTE_ARCH_32 (New. 32-bit platforms of all architectures)
| |
| +----RTE_ARCH_ARMv7 (ARMv7 platforms)
| |
| +----RTE_ARCH_ARMv8_AARCH32 (aarch32 state on aarch64 machine)
|
+----RTE_ARCH_64 (64-bit platforms of all architectures)
|
+----RTE_ARCH_ARM64 (64-bit Arm platforms)
RTE_ARCH_32 will be explicitly defined for 32-bit platforms.
To fit into the new naming scheme, current usage of RTE_ARCH_ARM in
project is mapped to (RTE_ARCH_ARM && RTE_ARCH_32).
Matching flags for other architectures are:
RTE_ARCH_X86
|
+----RTE_ARCH_32
| |
| +----RTE_ARCH_I686
| |
| +----RTE_ARCH_X86_X32
|
+----RTE_ARCH_64
|
+----RTE_ARCH_X86_64
RTE_ARCH_PPC_64 ---- RTE_ARCH_64
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
-moutline-atomics allows LSE instructions to be used if available when
compiling for ARMv8.0 instruction set. It's enabled by default on newer
compilers, such as gcc-10.1. Enable the option in case an earlier
compiler version is used for the default build that lacks either -mcpu
or -mtune which would otherwise enable it.
Signed-off-by: Juraj Linkeš <juraj.linkes@pantheon.tech>
When compiling for a slightly different architecture, e.g. 32-bit on 64-bit
systems using CFLAGS rather than a cross-file, the pcap-config utility can
often return parameters that are unusable for the build in question, i.e.
providing the native 64-bit library paths rather than checking for 32-bit
equivalent.
Since many distros now include a version of libpcap with a
pkg-config file, and for those that don't find-library should work ok as a
fallback, we can explicitly just use pkg-config in the dependency search,
causing meson to skip trying to use pcap-config.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Tested-by: David Marchand <david.marchand@redhat.com>
The maximum number of queues for hns3 PF and VF driver is 64 based on
hns3 network engine with revision_id equals 0x21. Based on hns3 network
engine with revision_id equals 0x30, the hns3 PF PMD driver can support
up to 1280 queues, and hns3 VF PMD driver can support up to 128 queues.
The following points need to be modified to support maximizing queue
number and maintain better compatibility:
1) Maximizing the number of queues for hns3 PF and VF PMD driver In
current version, VF is not supported when PF is driven by hns3 PMD
driver. If maximum queue numbers allocated to PF PMD driver is less
than total tqps_num allocated to this port, all remaining number of
queues are mapped to VF function, which is unreasonable. So we fix
that all remaining number of queues are mapped to PF function.
Using RTE_LIBRTE_HNS3_MAX_TQP_NUM_PER_PF which comes from
configuration file to limit the queue number allocated to PF device
based on hns3 network engine with revision_id greater than 0x30. And
PF device still keep the maximum 64 queues based on hns3 network
engine with revision_id equals 0x21.
Remove restriction of the macro HNS3_MAX_TQP_NUM_PER_FUNC on the
maximum number of queues in hns3 VF PMD driver and use the value
allocated by hns3 PF kernel netdev driver.
2) According to the queue number allocated to PF device, a variable
array for Rx and Tx queue is dynamically allocated to record the
statistics of Rx and Tx queues during the .dev_init ops
implementation function.
3) Add an extended field in hns3_pf_res_cmd to support the case that
numbers of queue are greater than 1024.
4) Use new base address of Rx or Tx queue if QUEUE_ID of Rx or Tx queue
is greater than 1024.
5) Remove queue id mask and use all bits of actual queue_id as the
queue_id to configure hardware.
6) Currently, 0~9 bits of qset_id in hns3_nq_to_qs_link_cmd used to
record actual qset id and 10 bit as VLD bit are configured to
hardware. So we also need to use 11~15 bits when actual qset_id is
greater than 1024.
7) The number of queue sets based on different network engine are
different. We use it to calculate group number and configure to
hardware in the backpressure configuration.
8) Adding check operations for number of Rx and Tx queue user configured
when mapping queue to tc Rx queue numbers under a single TC must be
less than rss_size_max supported by a single TC. Rx and Tx queue
numbers are allocated to every TC by average. So Rx and Tx queue
numbers must be an integer multiple of 2, or redundant queues are not
available.
9) We can specify which packets enter the queue with a specific queue
number, when creating flow table rules by rte_flow API. Currently,
driver uses 0~9 bits to record the queue_id. So it is necessary to
extend one bit field to record queue_id and configure to hardware, if
the queue_id is greater than 1024.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Changed scripts to explicitly use Python 3 only, to avoid
maintaining Python 2.
Removed deprecation notices.
Signed-off-by: Louise Kilheeney <louise.kilheeney@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Robin Jarry <robin.jarry@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Replace use of RTE_MACHINE_CPUFLAG macros with regular compiler
macros, which are more complete than those provided by DPDK, and as such
it allows new instruction sets to be leveraged without having to do
extra work to set them up in DPDK.
Signed-off-by: Sean Morrissey <sean.morrissey@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The checks for libfdt try dependency() first which would only work if
a pkg-config would be present but libfdt has none.
Then it probes for the lib path itself via cc.find_library.
But later it adds the result of either probe to ext_deps which ends up
in build and also the resulting pkg-config to contain toolchain versioned
paths in Libs.private like:
/usr/lib/gcc/x86_64-linux-gnu/9/../../../x86_64-linux-gnu/libfdt.so
which obviously breaks on toolchain updates.
In general libs used multiple times - ipn3ke + ifpga in this case - are
checked centrally in config/meson.build so move it there and fix the
adding of dependencies to not use the full file path.
The result is libfdt in pkg-config now showing up as:
Libs.private: -pthread -lm -ldl -lnuma -lfdt -lpcap
Fixes: e1defba4cf ("raw/ifpga/base: support device tree")
Cc: stable@dpdk.org
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
Make is not supported for compiling DPDK, the config files are no
longer needed.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Start a new release cycle with empty release notes.
The ABI version becomes 21.0.
The ABI major is back to normal, having only one number (21 vs 20.0).
The map files are updated to the new ABI major number (21).
The ABI exceptions are dropped.
Travis ABI check is disabled because compatibility is not preserved.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Remove the memory management scheme for Extended Exact Match
using system memory. Using host memory scheme instead which
was the default anyway.
Fixes: b2da02480c ("net/bnxt: support EEM system memory")
Signed-off-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Farah Smith <farah.smith@broadcom.com>
Typo in debug log switch macro caused debug log cannot be enabled.
Since no log used in data path, remove the debug option entirely
and have logs always enabled.
Resolved compilation error when debug log is enabled:
rte_armv8_pmd.c: In function ‘process_armv8_chained_op’:
rte_armv8_pmd.c:633:22: error: expected ‘)’ before ‘crypto_func’
ARMV8_CRYPTO_ASSERT(crypto_func != NULL);
^
Fixes: 169ca3db55 ("crypto/armv8: add PMD optimized for ARMv8 processors")
Cc: stable@dpdk.org
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
This commit introduce the RegEx poll mode drivers class, and
adds Mellanox RegEx PMD.
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Signed-off-by: Ori Kam <orika@mellanox.com>
- Select EEM Host or System memory via config parameter
- Add EEM system memory support for kernel memory
- Dependent on DPDK changes that add support for the HWRM_OEM_CMD.
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Having a special versioning for experimental/internal libraries put a
additional maintenance cost while this status is already announced in
MAINTAINERS and the library headers/documentation.
Following discussions and vote at 05/20 TB meeting [1], use a single
versioning for all libraries in DPDK.
Note: for the ABI check, an exception [2] had been added when tweaking
this special versioning [3].
Prefer explicit libabigail rules (which will be dropped in 20.11).
1: https://mails.dpdk.org/archives/dev/2020-May/168450.html
2: https://git.dpdk.org/dpdk/commit/?id=23d7ad5db41c
3: https://git.dpdk.org/dpdk/commit/?id=ec2b8cd7ed69
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This commit introduce the API that is needed by the RegEx devices in
order to work with the RegEX lib.
During the probe of a RegEx device, the device should configure itself,
and allocate the resources it requires.
On completion of the device init, it should call the
rte_regex_dev_register in order to register itself as a RegEx device.
Signed-off-by: Ori Kam <orika@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Acked-by: Guy Kaneti <guyk@marvell.com>
As RegEx usage become more used by DPDK applications, for example:
* Next Generation Firewalls (NGFW)
* Deep Packet and Flow Inspection (DPI)
* Intrusion Prevention Systems (IPS)
* DDoS Mitigation
* Network Monitoring
* Data Loss Prevention (DLP)
* Smart NICs
* Grammar based content processing
* URL, spam and adware filtering
* Advanced auditing and policing of user/application security policies
* Financial data mining - parsing of streamed financial feeds
* Application recognition.
* Dmemory introspection.
* Natural Language Processing (NLP)
* Sentiment Analysis.
* Big data database acceleration.
* Computational storage.
Number of PMD providers started to work on HW implementation,
along side with SW implementations.
This lib adds the support for those kind of devices.
The RegEx Device API is composed of two parts:
- The application-oriented RegEx API that includes functions to setup
a RegEx device (configure it, setup its queue pairs and start it),
update the rule database and so on.
- The driver-oriented RegEx API that exports a function allowing
a RegEx poll Mode Driver (PMD) to simultaneously register itself as
a RegEx device driver.
RegEx device components and definitions:
+-----------------+
| |
| o---------+ rte_regexdev_[en|de]queue_burst()
| PCRE based o------+ | |
| RegEx pattern | | | +--------+ |
| matching engine o------+--+--o | | +------+
| | | | | queue |<==o===>|Core 0|
| o----+ | | | pair 0 | | |
| | | | | +--------+ +------+
+-----------------+ | | |
^ | | | +--------+
| | | | | | +------+
| | +--+--o queue |<======>|Core 1|
Rule|Database | | | pair 1 | | |
+------+----------+ | | +--------+ +------+
| Group 0 | | |
| +-------------+ | | | +--------+ +------+
| | Rules 0..n | | | | | | |Core 2|
| +-------------+ | | +--o queue |<======>| |
| Group 1 | | | pair 2 | +------+
| +-------------+ | | +--------+
| | Rules 0..n | | |
| +-------------+ | | +--------+
| Group 2 | | | | +------+
| +-------------+ | | | queue |<======>|Core n|
| | Rules 0..n | | +-------o pair n | | |
| +-------------+ | +--------+ +------+
| Group n |
| +-------------+ |<-------rte_regexdev_rule_db_update()
| | | |<-------rte_regexdev_rule_db_compile_activate()
| | Rules 0..n | |<-------rte_regexdev_rule_db_import()
| +-------------+ |------->rte_regexdev_rule_db_export()
+-----------------+
RegEx: A regular expression is a concise and flexible means for matching
strings of text, such as particular characters, words, or patterns of
characters. A common abbreviation for this is â~@~\RegExâ~@~].
RegEx device: A hardware or software-based implementation of RegEx
device API for PCRE based pattern matching syntax and semantics.
PCRE RegEx syntax and semantics specification:
http://regexkit.sourceforge.net/Documentation/pcre/pcrepattern.html
RegEx queue pair: Each RegEx device should have one or more queue pair to
transmit a burst of pattern matching request and receive a burst of
receive the pattern matching response. The pattern matching
request/response embedded in *rte_regex_ops* structure.
Rule: A pattern matching rule expressed in PCRE RegEx syntax along with
Match ID and Group ID to identify the rule upon the match.
Rule database: The RegEx device accepts regular expressions and converts
them into a compiled rule database that can then be used to scan data.
Compilation allows the device to analyze the given pattern(s) and
pre-determine how to scan for these patterns in an optimized fashion that
would be far too expensive to compute at run-time. A rule database
contains a set of rules that compiled in device specific binary form.
Match ID or Rule ID: A unique identifier provided at the time of rule
creation for the application to identify the rule upon match.
Group ID: Group of rules can be grouped under one group ID to enable
rule isolation and effective pattern matching. A unique group identifier
provided at the time of rule creation for the application to identify
the rule upon match.
Scan: A pattern matching request through *enqueue* API.
It may possible that a given RegEx device may not support all the
features
of PCRE. The application may probe unsupported features through
struct rte_regexdev_info::pcre_unsup_flags
By default, all the functions of the RegEx Device API exported by a PMD
are lock-free functions which assume to not be invoked in parallel on
different logical cores to work on the same target object. For instance,
the dequeue function of a PMD cannot be invoked in parallel on two logical
cores to operates on same RegEx queue pair. Of course, this function
can be invoked in parallel by different logical core on different queue
pair. It is the responsibility of the upper level application to
enforce this rule.
In all functions of the RegEx API, the RegEx device is
designated by an integer >= 0 named the device identifier *dev_id*
At the RegEx driver level, RegEx devices are represented by a generic
data structure of type *rte_regexdev*.
RegEx devices are dynamically registered during the PCI/SoC device
probing phase performed at EAL initialization time.
When a RegEx device is being probed, a *rte_regexdev* structure and
a new device identifier are allocated for that device. Then, the
regexdev_init() function supplied by the RegEx driver matching the
probed device is invoked to properly initialize the device.
The role of the device init function consists of resetting the hardware
or software RegEx driver implementations.
If the device init operation is successful, the correspondence between
the device identifier assigned to the new device and its associated
*rte_regexdev* structure is effectively registered.
Otherwise, both the *rte_regexdev* structure and the device identifier
are freed.
The functions exported by the application RegEx API to setup a device
designated by its device identifier must be invoked in the following
order:
- rte_regexdev_configure()
- rte_regexdev_queue_pair_setup()
- rte_regexdev_start()
Then, the application can invoke, in any order, the functions
exported by the RegEx API to enqueue pattern matching job, dequeue
pattern matching response, get the stats, update the rule database,
get/set device attributes and so on
If the application wants to change the configuration (i.e. call
rte_regexdev_configure() or rte_regexdev_queue_pair_setup()), it must
call rte_regexdev_stop() first to stop the device and then do the
reconfiguration before calling rte_regexdev_start() again. The enqueue and
dequeue functions should not be invoked when the device is stopped.
Finally, an application can close a RegEx device by invoking the
rte_regexdev_close() function.
Each function of the application RegEx API invokes a specific function
of the PMD that controls the target device designated by its device
identifier.
For this purpose, all device-specific functions of a RegEx driver are
supplied through a set of pointers contained in a generic structure of
type *regexdev_ops*.
The address of the *regexdev_ops* structure is stored in the
*rte_regexdev* structure by the device init function of the RegEx driver,
which is invoked during the PCI/SoC device probing phase, as explained
earlier.
In other words, each function of the RegEx API simply retrieves the
*rte_regexdev* structure associated with the device identifier and
performs an indirect invocation of the corresponding driver function
supplied in the *regexdev_ops* structure of the *rte_regexdev*
structure.
For performance reasons, the address of the fast-path functions of the
RegEx driver is not contained in the *regexdev_ops* structure.
Instead, they are directly stored at the beginning of the *rte_regexdev*
structure to avoid an extra indirect memory access during their
invocation.
RTE RegEx device drivers do not use interrupts for enqueue or dequeue
operation. Instead, RegEx drivers export Poll-Mode enqueue and dequeue
functions to applications.
The *enqueue* operation submits a burst of RegEx pattern matching
request to the RegEx device and the *dequeue* operation gets a burst of
pattern matching response for the ones submitted through *enqueue*
operation.
Typical application utilisation of the RegEx device API will follow the
following programming flow.
- rte_regexdev_configure()
- rte_regexdev_queue_pair_setup()
- rte_regexdev_rule_db_update() Needs to invoke if precompiled rule
database not
provided in rte_regexdev_config::rule_db for rte_regexdev_configure()
and/or application needs to update rule database.
- rte_regexdev_rule_db_compile_activate() Needs to invoke if
rte_regexdev_rule_db_update function was used.
- Create or reuse exiting mempool for *rte_regex_ops* objects.
- rte_regexdev_start()
- rte_regexdev_enqueue_burst()
- rte_regexdev_dequeue_burst()
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Ori Kam <orika@mellanox.com>
Rather than checking the binutils version number, which can lead to
unnecessary disabling of AVX512 if fixes have been backported to distro
versions, we can instead check the output of "as" from binutils to see if
it is correct.
The check in the script uses the minimal assembly reproduction code posted
to the public bug tracker for gcc/binutils for those issues [1]. If the
binutils bug is present, the instruction parameters - specifically the
displacement parameter - will be different in the disassembled output
compared to the input. Therefore the check involves assembling a single
instruction and disassembling it again, checking that the two match.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90028
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
When building with meson, the default size of virtual address space
reserved for mapping pages was globally set at 512GB, which is too big for
use in 32-bit processes. To match the behaviour with "make", we configure
this to be 512GB for 64-bit and 2GB for 32-bit builds.
Bugzilla ID: 498
Fixes: 66cc45e293 ("mem: replace memseg with memseg lists")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Expand vector PMD support to aarch32.
Enable i40e PMD by default for armv7 make build.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Expand vector PMD support to aarch32.
Enable ixgbe PMD by default for armv7 make build.
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
New cn98xx SOC comes up with two NIX blocks wrt
cn96xx, cn93xx, to achieve higher performance.
Also the no of cores increased to 36 from 24.
Adding support for cn98xx where need a logic to
detect if the LF is attached to NIX0 or NIX1 and
then accordingly use the respective NIX block.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The Meson cross file is renamed from meson_mingw.txt to cross-mingw,
and is added to test-meson-builds.sh.
The only example supported on Windows so far is "helloworld",
that's why the default list of examples is overridden.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Add cross-compilation support of a PPC target in the build test matrix.
The CPU is defined as Power8, running as little endian.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Support the debug functions in eal_common_debug.c for Windows.
Implementation of rte_dump_stack to get a backtrace similarly to Unix
and of rte_eal_cleanup in eal.c.
Signed-off-by: Tal Shnaiderman <talshn@mellanox.com>
Tested-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Even if pthread is provided by the toolchain, it is not needed for DPDK
on Windows, because internal shim is used. As a side-effect, this
enables cross-build with MinGW configured with non-POSIX thread library,
e.g. mcfgthread, which is the default on some distributions.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Pallavi Kadam <pallavi.kadam@intel.com>
Basic memory management supports core libraries and PMDs operating in
IOVA as PA mode. It uses a kernel-mode driver, virt2phys, to obtain
IOVAs of hugepages allocated from user-mode. Multi-process mode is not
implemented and is forcefully disabled at startup. Assign myself as a
maintainer for Windows file and memory management implementation.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Add hugepages discovery ("large pages" in Windows terminology)
and update documentation for required privilege setup. Only 2MB
hugepages are supported and their number is estimated roughly
due to the lack or unstable status of suitable OS APIs.
Assign myself as maintainer for the implementation file.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
gcc 10 issues warnings about the use of rearm_data marker
from struct rte_mbuf.
e.g.
../drivers/net/enic/enic_rxtx_vec_avx2.c: In function ‘rx_one’:
../drivers/net/enic/enic_rxtx_vec_avx2.c:21:2:
warning:
array subscript 0 is outside the bounds of an interior zero-length array
‘RTE_MARKER64’ {aka ‘long unsigned int[0]’} [-Wzero-length-bounds]
21 | *(uint64_t *)&mb->rearm_data = enic->mbuf_initializer;
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ../lib/librte_mbuf/rte_mbuf.h:45,
from ../drivers/net/enic/enic_rxtx_vec_avx2.c:6:
../lib/librte_mbuf/rte_mbuf_core.h:484:15:
note: while referencing ‘rearm_data’
484 | RTE_MARKER64 rearm_data;
|
Disable this warning for gcc 10 in order to allow v20.05 to build
without changes to struct rte_mbuf.
Bugzilla ID: 396
Cc: stable@dpdk.org
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
This patch moves telemetry further down the build, and adds it as a
dependency for EAL. Telemetry V2 is now configured to build by default,
and the legacy support is built when the telemetry config flag is set.
Telemetry now has EAL flags, shown below:
"--telemetry" = Enables telemetry (this is default if no flags given)
"--no-telemetry" = Disables telemetry
When telemetry is enabled, it will attempt to open the new socket
version, and also the legacy support socket (this will depend on Jansson
external dependency and telemetry config flag, as before).
Signed-off-by: Ciara Power <ciara.power@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
The global include path, which is used by anything built before EAL,
points to the EAL header files so they utility macros etc. can be used
anywhere in DPDK. This path included the OS-specific EAL header files,
but not the architecture-specific ones. This patch moves the selection
of target architecture to the top-level meson.build file so that the
global include can reference that.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Keith Wiles <keith.wiles@intel.com>
Add log infra for node specific logging.
Also, add null rte_node that just ignores all the objects
directed to it.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Graph architecture abstracts the data processing functions as
"node" and "link" them together to create a complex "graph" to enable
reusable/modular data processing functions.
These APIs enables graph framework operations such as create, lookup,
dump and destroy on graph and node operations such as clone,
edge update, and edge shrink, etc. The API also allows creating the
stats cluster to monitor per graph and per node stats.
This patch defines the public API for graph support.
This patch also adds support for the build infrastructure and
update the MAINTAINERS file for the graph subsystem.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Define the public API for trace support.
This patch also adds support for the build infrastructure and
update the MAINTAINERS file for the trace subsystem.
The 8 bytes tracepoint object is a global variable, and can be used in
fast path. Created a new __rte_trace_point section to store the
tracepoint objects as,
- It is a mostly read-only data and not to mix with other "write"
global variables.
- Chances that the same subsystem fast path variables come in the same
fast path cache line. i.e, it will enable a more predictable
performance number from build to build.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Add stubs for the FPGA 5GNR FEC PMD
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Dave Burley <dave.burley@accelercomm.com>
Acked-by: Niall Power <niall.power@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add libatomic as a global dependency when compiling for 32-bit using
clang. As we need libatomic for 64-bit atomic ops.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The arch-specific directories arm, ppc and x86 in common/include/arch/
are moved as include/ sub-directories of respective arch directories:
- arm/include/
- ppc/include/
- x86/include/
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The directories ppc_64 are renamed as ppc in
- config/
- lib/librte_eal/common/arch/
- lib/librte_eal/common/include/arch/
The EAL directories are not really renamed, but symbolically linked,
because they will be moved with their new name in the next commits.
If ppc_32 needs to be supported, it can be in the same directory.
The arch directories arm and x86 are already covering both 32 and 64-bit
sub-architectures.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: David Marchand <david.marchand@redhat.com>
Remove CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC with below
consideration:
1. A default Rx path can always be selected by setting a proper
rx_free_thresh value at runtime, see
ice_check_rx_burst_bulk_alloc_preconditions.
2. Its not a big deal to always reserve more space for desc ring.
"ring_size = (uint16_t)(rxq->nb_rx_desc + ICE_RX_MAX_BURST);"
3. Fixes a potential invalid memory access in ice_reset_rx_queue.
If CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC is turned on while
ice_check_rx_burst_bulk_alloc_preconditions return fail.
Below code will have problem.
for (i = 0; i < ICE_RX_MAX_BURST; ++i)
rxq->sw_ring[rxq->nb_rx_desc + i].mbuf = &rxq->fake_mbuf;
Fixes: 50370662b7 ("net/ice: support device and queue ops")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Clang on Windows doesn't use pthread for now, while MinGW does. Removing
`-pthread` option with MS linker fixes the following warning:
clang: warning: argument unused during compilation: '-pthread'
[-Wunused-command-line-argument]
Option `--no-as-needed` is meaningless for PE output. Disabling it on
Windows fixes the following warning:
LINK : warning LNK4044: unrecognized option '/-no-as-needed'; ignored
Fixes: 98edcbb5a ("eal/windows: introduce Windows support")
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: William Tu <u9012063@gmail.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Pallavi Kadam <pallavi.kadam@intel.com>
Add Meson configuration to cross-compile for Windows using MinGW-w64.
It may require adjustments in some cases, but at least it provides
the foundation.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: William Tu <u9012063@gmail.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
MinGW-w64 linker does not mimic MS linker options, so the build system
must differentiate between linkers on Windows. Use GNU linker options
with GCC and MS linker options with Clang.
MinGW-w64 by default uses MSVCRT stdio, which does not comply to ANSI,
most notably its formatting and string handling functions. MinGW-w64
support for the Universal CRT (UCRT) is ongoing, but the toolchain
provides its own standard-complying implementation of stdio. The latter
is used in the patch to support formatting in DPDK.
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: William Tu <u9012063@gmail.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
The devices of the family ConnectX may have two letters as suffix.
Such suffix is preceded with a space and the second x is lowercase:
- ConnectX-4 Lx
- ConnectX-5 Ex
- ConnectX-6 Dx
Uppercase of the device family name BlueField is also fixed.
The lists of supported devices are fixed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The problem occurred when workaround that makes soname two digits
applied. With this change for the ABI version "20.0.1" the experimental
library version become ".so.2001".
After workaround removed in ABI version 21.0, the experimental library
version will become ".so.210".
"2001" is bigger value than "201" although it is a previous version of
the library version, this can break the version comparisons.
To fix this, introducing a temporary sub level versioning for the
experimental libraries, so that minor version comparison will continue
to work.
After change experimental libraries will follow below versioning:
DPDK version ABI version soname library name
------------ ----------- ------ ------------
DPDK 19.11 20.0 .so.0.200 .so.0.200
DPDK 20.02 20.0.1 .so.0.200.1 .so.0.200.1
DPDK 20.05 20.0.2 .so.0.200.2 .so.0.200.2
DPDK 20.11 21.0 .so.0.210 .so.0.210
DPDK 21.02 21.1 .so.0.211 .so.0.211
Note: After workaround removed in DPDK 20.11 and soname switch back to
single digit this patch won't work and needs to be updated.
Fixes: f26c2b39b2 ("build: fix soname info for 19.11 compatibility")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Ray Kinsella <ray.kinsella@intel.com>
Some config options are overwritten with the same value
as the one inherited from its template parent.
Such duplicates which have no meaningful comments are removed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: David Marchand <david.marchand@redhat.com>
Broadcom Stingray is armv8 CPU having cortex-a72. The implementor ID is
0x41 (arm) and the primary part number is 0xd08 (cortex-a72).
Signed-off-by: Qingmin Liu <qingmin.liu@broadcom.com>
While icc builds without the "werror" setting build successfully, there are
a lot of warnings. To make the output cleaner, and to allow building with
warnings enabled, we can add a list of warning ids to ignore.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Add a new driver to support vDPA operations by Mellanox devices.
The first Mellanox devices which support vDPA operations are
ConnectX-6 Dx and Bluefield1 HCA for their PF ports and VF ports.
This driver is depending on rdma-core like the mlx5 PMD, also it is
going to use mlx5 DevX to create HW objects directly by the FW.
Hence, the common/mlx5 library is linked to the mlx5_vdpa driver.
This driver will not be compiled by default due to the above
dependencies.
Register a new log type for this driver.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add makefile and config file options to compile the Pensando ionic PMD.
Add feature and version map file.
Update maintainers file.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add the OCTEON TX2 SDP EP device probe along with the
build infrastructure for Make and meson builds.
Signed-off-by: Mahipal Challa <mchalla@marvell.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
CONFIG_RTE_IXGBE_INC_VECTOR is enabled by default, so remove
it and use architecture specific flags.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
The rte_wait_until_equal_xx APIs abstract the functionality of
'polling for a memory location to become equal to a given value'.
Add the RTE_ARM_USE_WFE configuration entry for aarch64, disabled
by default. When it is enabled, the above APIs will call WFE instruction
to save CPU cycles and power.
From a VM, when calling this API on aarch64, it may trap in and out to
release vCPUs whereas cause high exit latency. Since kernel 4.18.20 an
adaptive trapping mechanism is introduced to balance the latency and
workload.
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Using version 0.47.1, meson is unable to find the math library in Travis
for the 32bits job.
Quite surprisingly, this problem is not seen with the 64bits jobs.
Switching to 0.48.0, the problem disappears.
But we should pass 'm' to find_library instead of 'libm' anyway.
Fixes: 98edcbb5ab ("eal/windows: introduce Windows support")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
If the compiler does not recognise the specific CPU when building with the
default "native" machine type, sse4.2 instructions can be missing, causing
a build error. Rather than advising the user to change the machine type,
we can just turn on SSE4.2 directly. This can prevent issues with running
automated tests with older compilers/distros on newer hardware.
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
The soname for each stable ABI version should be just the ABI version major
number without the minor number. Unfortunately both major and minor were
used causing version 20.1 to be incompatible with 20.0.
This patch fixes the issue by switching from 2-part to 3-part ABI version
numbers so that we can keep 20.0 as soname and using the final digits to
identify the 20.x releases which are ABI compatible. This requires changes
to both make and meson builds to handle the three-digit version and shrink
it to 2-digit for soname.
The final fix needed in this patch is to adjust the library version number
for the ethtool example library, which needs to be upped to 2-digits, as
external libraries using the DPDK build system also use the logic in this
file.
Fixes: cba806e07d ("build: change ABI versioning to global")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-by: Ray Kinsella <mdr@ashroe.eu>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Kevin Laatz <kevin.laatz@intel.com>
Tested-by: David Marchand <david.marchand@redhat.com>
Meson fails to find a pkg-config executable if pkgconfig
isn't set for aarch64. The environment variable `PKG_CONFIG_PATH`
is useless in this case, and meson fails to locate dependencies
that are built in non-standard paths.
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Remove trailing blank lines. They serve no purpose and are just
editor leftovers.
These can cause git to complain about whitespace errors during merges.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
While most windows apps can handle both "\" and "/" as path separators,
"more" is treating the "/" as the start of a command-line flag in this
case, causing errors.
Fixes: cba806e07d ("build: change ABI versioning to global")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Ranjit Menon <ranjit.menon@intel.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Add the make and meson based build infrastructure for the eMAG platform
from Ampere Computing corp., which is a 64-bit ARM processor with 32
Armv8 64-bit CPU cores. For more information, refer to:
https://amperecomputing.com/product/
Signed-off-by: Jerry Hao OS <jerryhao@os.amperecomputing.com>
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
To make the list complete and consistent, add cortex-a76 configuration.
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Arm N1 SDP is an infrastructure segment development platform
based on armv8.2-a Neoverse N1 CPU. For more information, refer to:
https://community.arm.com/developer/tools-software/oss-platforms/w/
docs/440/neoverse-n1-sdp
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
As per new ABI policy [1], all of the libraries are now versioned using
one global ABI version. Stable libraries use the MAJOR.MINOR ABI
version for their shared objects, while experimental libraries
use the 0.MAJORMINOR convention for their versioning.
Experimental library versioning is managed globally. Changes in this
patch implement the necessary steps to enable that.
The CONFIG_RTE_MAJOR_ABI option was introduced to permit multiple
DPDK versions installed side by side. The problem is now addressed
through the new ABI policy, and thus can be removed.
[David] For external libraries relying on Makefile, LIBABIVER is
preserved to avoid using DPDK global ABI version.
[1] https://doc.dpdk.org/guides/contributing/abi_policy.html
Signed-off-by: Marcin Baran <marcinx.baran@intel.com>
Signed-off-by: Pawel Modrak <pawelx.modrak@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
In PAC N3000 card, this is a BMC chip which using MAX10 FPGA
to manage the board configuration, like sensors, flash controller,
QSFP, powers. And this is a SPI bus connected between A10 FPGA and
MAX10, we can access the MAX10 registers over this SPI bus.
In BMC, there are about 19 sensors in MAX10 chip, including the FPGA
core temperature, Board temperature, board current, voltage and so on.
We use DTB (Device tree table) to describe it. This DTB file is store
in nor flash partition, which will flashed in Factory when the boards
delivery to customers. And the same time, the customers can easy to
customize the BMC configuration like change the sensors.
Add device tree support by using libfdt library in Linux distribution.
The end-user should pre-install the libfdt and libfdt-devel package
before use DPDK on PAC N3000 Card.
For Centos 7.x: sudo yum install libfdt libfdt-devel
For Ubuntu 18.04: sudo apt install libfdt-dev libfdt1
To eliminate build error, we currently do not compile raw/ifpga
and net/ipn3ke. User should install libfdt and libfdt-devel first,
modify config/common_linux, CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=n
to CONFIG_RTE_LIBRTE_PMD_IFPGA_RAWDEV=y, modify config/common_base,
CONFIG_RTE_LIBRTE_IPN3KE_PMD=n to CONFIG_RTE_LIBRTE_IPN3KE_PMD=y.
Then this function can work.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add IRQ support for ifpga FME global error, port error and unit.
We implemented this feature by vfio interrupt mechanism.
To build this feature, CONFIG_RTE_EAL_VFIO should be enabled.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Signed-off-by: Andy Pei <andy.pei@intel.com>
This patch adds an option to enable link time optimization. In addition
to LTO option itself (-flto) fat-lto-objects are being used. This is
because during the build pmdinfogen scans the generated ELF objects to
find this_pmd_name* symbol in symbol table. Without fat-lto-objects gcc
produces ELF only with extra symbols for internal use during linking.
Signed-off-by: Andrzej Ostruszka <aostruszka@marvell.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
dpaa and dpaa2 config have evolved to be same. The same binary
can now work across the platforms. So, there is no need to maintain
two different build configs.
The dpaa config shall work for both generation of dpaa platforms.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Add FIB (Forwarding Information Base) library. This library
implements a dataplane structures and algorithms designed for
fast longest prefix match.
Internally it consists of two parts - RIB (control plane ops) and
implementation for the dataplane tasks.
Initial version provides two implementations for both IPv4 and IPv6:
dummy (uses RIB as a dataplane) and DIR24_8 (same as current LPM)
Due to proposed design it allows to extend FIB with new algorithms
in future (for example DXR, poptrie, etc).
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Add RIB (Routing Information Base) library. This library
implements an IPv4 routing table optimized for control plane
operations. It implements a control plane struct containing routes
in a tree and provides fast add/del operations for routes.
Also it allows to perform fast subtree traversals
(i.e. retrieve existing subroutes for a given prefix).
This structure will be used as a control plane helper structure
for FIB implementation. Also it might be used standalone in other
different places such as bitmaps for example.
Internal implementation is level compressed binary trie.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
This patch disables the 1588 timer support by default on DPAA2
platform due to the performance impact.
By default it is disabled in config/common_base, so remove the entry
from DPAA2.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
The meson build was missing the define to enable pcap port support if
libpcap (development) package was found on the build platform. Rather than
duplicating the checks for libpcap found in the pcap net PMD build file, we
can move the checks to the top-level config directory and reference the
RTE_PCAP_PORT setting elsewhere in the build.
Bugzilla ID: 351
Fixes: 5b9656b157 ("lib: build with meson")
Cc: stable@dpdk.org
Reported-by: Cristian Bidea <cristian.bidea@keysight.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Cristian Bidea <cristian.bidea@keysight.com>
Any file with ABI versioned functions needs different macros for shared and
static builds, so we need to accommodate that. Rather than building
everything twice, we just flag to the build system which libraries need
that handling, by setting use_function_versioning in the meson.build files.
To ensure we don't get silent errors at build time due to this meson flag
being missed, we add an explicit error to the function versioning header
file if a known C macro is not defined. Since "make" builds always only
build one of shared or static libraries, this define can be always set, and
so is added to the global CFLAGS. For meson, the build flag - and therefore
the C define - is set for the three libraries that need the function
versioning: "distributor", "lpm" and "timer".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Andrzej Ostruszka <amo@semihalf.com>
Reviewed-by: Andrzej Ostruszka <amo@semihalf.com>
gcc 4.8.5 used on RHEL 7.6 can identify a Power 9 CPU but cannot generate
Power 9 code when the "-mcpu=native" command line argument is used. Test
whether the compiler can generate Power 9 code and adjust the machine
setting appropriately.
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
pfe (packet forwarding engine) is a network
poll mode driver for NXP SoC ls1012a.
This patch introduces the framework of pfe
driver with basic functions of initialisation
and teardown.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
CAAM JR can work on both LE and BE mode.
Latest platforms are in LE mode, so changing the
default mode to LE to make it more convenient for
the latest platforms.
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
RTE_EAL_ALLOW_INV_SOCKET_ID had been introduced and documented as used
with xen dom0 support (dropped for some time now).
Closely looking at this, the code was changed later and ensures that the
socket id is in the [0..RTE_MAX_NUMA_NODES] range anyway.
Let's drop this dead code and the build option with it.
Fixes: 94ef296414 ("eal/linux: fix numa node detection")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
While meson always adds -Wall flag to C compiles, the make build adds extra
warning flags that are not present in the meson build. This addresses that
shortcoming by adding additional warning flags to our builds. The one
omission is the -Wcast-align flag, which though present in make gcc builds,
gives a lot of warnings/errors when used with clang.
The removed warning "-Wunused-parameter" is covered by the "-Wextra"
parameter so is unnecessary.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch adds the implementation of the 128-bit atomic compare
exchange API on aarch64. Using 64-bit 'ldxp/stxp' instructions
can perform this operation. Moreover, on the LSE atomic extension
accelerated platforms, it is implemented by 'casp' instructions for
better performance.
Since the '__ARM_FEATURE_ATOMICS' flag only supports GCC-9, this
patch adds a new config flag 'RTE_ARM_FEATURE_ATOMICS' to enable
the 'cas' version on older version compilers.
For octeontx2, we make sure that the lse (and other) extensions are
enabled even if the compiler does not know of the octeontx2 target
cpu.
Since direct x0 register used in the code and cas_op_name() and
rte_atomic128_cmp_exchange() is inline function, based on parent
function load, it may corrupt x0 register aka break aarch64 ABI.
Define CAS operations as rte_noinline functions to avoid an ABI
break [1].
1: https://git.dpdk.org/dpdk/commit/?id=5b40ec6b9662
Suggested-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Tested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
A while ago telemetry was added in 57ae0ec6 and it also added as-needed
to config/meson.build. This seems no more needed these days as due to other
build changes the ordering in buildlogs is:
[...] -lrte_telemetry [...] -Wl,--no-as-needed [...]
Which means telemetry no more benefits from --no-as-needed anyway.
Overlinking problems get triggered by the meson generated pkgconfig which
will have:
[...] -Wl,--no-as-needed <somelibsusedbydpdk>
This will overlink <somelibs> and in addition anything that follows
as it also doesn't wrap back to --as-needed. So if a projects includes
dpdk libs + <other> it will also consider <other> with --no-as-needed.
Ubuntu bug: https://bugs.launchpad.net/ubuntu/+source/dpdk/+bug/1841759
Fixes: 57ae0ec626 ("build: add dependency on telemetry to apps with meson")
Cc: stable@dpdk.org
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch adds the support for PTP driver for
DPAA2 devices.
To enable set
CONFIG_RTE_LIBRTE_IEEE1588=y in
config/defconfig_arm64-dpaa2-linuxapp-gc
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
IEEE1588 driver needs timestamp of packets.
For DPAA2, the timestamp of TX packets is
stored in annotation area of corresponding
TX confirmation packet.
This patch enables timestamp fields in
annotation area and TX confirmation mode if
CONFIG_RTE_LIBRTE_IEEE1588 is set in
config/defconfig_arm64-dpaa2-linuxapp-gc
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Remove compile time option to control Tx coalescing Latency vs
Throughput behavior. Add tx_mode_latency devarg instead, to
dynamically control Tx coalescing behavior.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Remove compile time flags and use dynamic logging for debug prints.
Also remove rarely used debug logs in register access and datapath.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
The fpga_lte_fec is the only bbdev driver that does not use bbdev in the
name, so modify it to keep consistency with the other bbdev drivers. This
will then allow later simplification due to all drivers using the same
basic naming format.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Since gcc-8.3(I tried 8.3 and 9.1), the meson build failed on ThunderX2.
It got the following compiling errors:
/usr/lib/gcc/aarch64-linux-gnu/9/include/arm_neon.h:26493:1: error:
inlining failed in call to always_inline ‘vmull_p64’:
target specific option mismatch 26493 | vmull_p64 (poly64_t a, poly64_t b)
Fixes: 7286c9d723 ("config: add thunderx2 machine")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Jingzhao Ni <jingzhao.ni@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Implementation still based on Intel SDK libraries
optimized for AVX512 instructions set and 5GNR.
This can be also build for AVX2 for 4G capability or
without SDK dependency for maintenance.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Adding compile flag to allow to build the turbo_sw PMD
without dependency to have the SDK libraries installed.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Adding bare minimum PMD library and doc build infrastructure
and claim the maintainership for octeontx2 PMD.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Introduce rawdev driver support for NTB (Non-transparent Bridge) which
can help to connect two separate hosts with each other.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add the make and meson based build infrastructure along
with the DMA device probe with documentation infrastructure.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Setting RTE_MAX_LCORE to reflect the largest available configuration.
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Acked-by: David Christensen <drc@linux.vnet.ibm.com>
Add stubs for ioat rawdev driver support in DPDK, specifically:
* makefile and meson build hooks
* initial public header file
* rawdev main C file, with probe and release functions
* release note update announcing the driver
* initial documentation for the new section in the rawdev doc
* unit test stubs for device unit tests
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Add the make and meson based build infrastructure along with the
eventdev(SSO) device probe.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Add build and doc files along with hinic_pmd_ethdev.c
which just includes PMD register and log initialization
for compilation.
Signed-off-by: Ziyang Xuan <xuanziyang2@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When a component uses either XOPEN_SOURCE or POSIX_C_SOURCE macro
explicitly in its build recipe, it restricts visibility of a non POSIX
features subset, such as IANA protocol numbers (IPPROTO_* macros).
Non standard features are enabled by default for DPDK both for Linux
thanks to _GNU_SOURCE and for FreeBSD thanks to __BSD_VISIBLE. However
using XOPEN_SOURCE or POSIX_(C_)SOURCE in a component causes
__BSD_VISIBLE to be defined to 0 for FreeBSD, causing different feature
sets visibility for Linux and FreeBSD. It restricts from using IPPROTO
macros in public headers, such as rte_ip.h, despite the fact they are
already widely used in sources.
Add __BSD_VISIBLE macro specified unconditionally for FreeBSD targets
which enforces feature sets visibility unification between Linux and
FreeBSD.
Add single -D_GNU_SOURCE to config/meson.build as a project argument
instead of adding separate directive for each project subtree.
This patch solves the problem of build breaks for [1] on FreeBSD [2]
following the discussion [3].
[1] https://mails.dpdk.org/archives/dev/2019-May/131885.html
[2] http://mails.dpdk.org/archives/test-report/2019-May/082263.html
[3] https://mails.dpdk.org/archives/dev/2019-May/132110.html
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add the make and meson based build infrastructure along
with the mempool(NPA) device probe.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Add the make and meson based build infrastructure along with
HW definition header file.
This patch adds skeleton otx2_mbox.c file to make sure
all header files are intact, subsequent patches add content
to otx2_mbox.c
This patch also updates CONFIG_RTE_MAX_VFIO_GROUPS
value to 128 as the system can have up to 128 PFs/VFs.
For octeontx2 meson build target, CONFIG_RTE_MAX_VFIO_GROUPS
defined as 128 so no additional changes required.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
DEBUG_DUMP_DESC flag is commented out in IAVF Makefile and to enable
it user needs to edit the Makefile. It is felt that this method is not
good. Hence removing this flag from IAVF makefile and adding a flag
CONFIG_RTE_LIBRTE_IAVF_DEBUG_DUMP_DESC to config/common_base.
Signed-off-by: Lavanya Govindarajan <lavanyax.govindarajan@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Shared memory packet interface (memif) PMD allows for DPDK and any other
client using memif (DPDK, VPP, libmemif) to communicate using shared
memory. The created device transmits packets in a raw format. It can be
used with Ethernet mode, IP mode, or Punt/Inject. At this moment, only
Ethernet mode is supported in DPDK memif implementation. Memif is Linux
only.
Signed-off-by: Jakub Grajciar <jgrajcia@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch introduces armada target to address difference
in number of cores, no numa support
Signed-off-by: Liron Himi <lironh@marvell.com>
Reviewed-by: Alan Winkowski <walan@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Gavin Hu <gavin.hu@arm.com>
Per armv8 crypto extension support, make build always enable it by default
as long as compiler supports the feature while meson build only enables it
for 'default' machine of generic armv8 architecture.
It is known that not all the armv8 platforms have the crypto extension. For
example, Mellanox BlueField has a variant which doesn't have it. If crypto
enabled binary runs on such a platform, rte_eal_init() fails.
'+crypto' flag currently implies only '+aes' and '+sha2' and enabling it
will generate the crypto instructions only when crypto intrinsics are used.
For the devices supporting 8.2 crypto or newer, compiler could generate
such instructions beyond intrinsics or asm code. For example, compiler can
generate 3-way exclusive OR instructions if sha3 is supported. However, it
has to be enabled by adding '+sha3' as of today.
In DPDK, armv8 cryptodev is the only one which requires the crypto support.
As it even uses external library of Marvell which is compiled out of DPDK
with crypto support and there's run-time check for required cpuflags,
crypto support can be disabled in DPDK.
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
The meson build never checked for the presence of rdrand and rdseed
instructions, while make build never checked for rdseed. Ensure builds
always have the appropriate checks - and therefore defines - for these
instructions. For runtime, we also add in rdseed to the list of known
bits returned from cpuid() instruction, so we can confirm its presence at
application init time.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Mattias Rönnblom <mattias.ronnblom@ericsson.com>
Rather than checking flag by flag individually, use a loop to make it
easier to check new flags.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
To improve code quality we want to turn on as many warnings as we can in
the DPDK code, so turn on the "unused-parameter" warning in meson builds to
match that of the make builds. To ensure correct compilation, disable the
warning selectively for driver base code that otherwise would have issues.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Current design requires kernel drivers and they need to be probed by
Linux up to some level so that they can be usable by DPDK for ethtool
support, this requires maintaining the Linux drivers in DPDK.
Also ethtool support is limited and hard, if not impossible, to expand
to other PMDs.
Since KNI ethtool support is not used commonly, if not used at all,
removing the support for the sake of simplicity and maintenance.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
If libbsd is enabled in DPDK, the strlcpy and strlcat functions in
rte_string_fns.h redirect to the varients in libbsd, only using the
fallbacks if it is not enabled. Therefore, if libbsd is enabled, it needs
to be called out as a DPDK dependency in the pkgconfig file.
To ensure that we don't have undefined variables on non-Linux platforms, we
can remove the linux condition around the libbsd check - no harm comes in
looking for it on other OS, since it's an optional dependency.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The post-install script to symlink the PMDs from their own PMD directory to
the regular lib directory (so they would be found by ld at runtime) was
using the "-r" flag to ln to create relative symlinks. This flag is
unsupported by ln on FreeBSD causing the ninja install step to fail.
Reworking the script to take the relative driver path as parameter removes
the need for ln to calculate the relative path ensuring compatibility with
FreeBSD.
As part of the fix, we move the registration of the install script to the
config/meson.build file, from the top level one. This improves readability
as the script takes as parameters the variables set in that file.
Fixes: ed4d43d73e ("build: symlink drivers to library directory")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Just syntax change to reduce indentation, no functional change.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
On Skylake platform, with native build, KNI kernel module crashes
because of the corrupted values passed to kernel module.
The corruption occurs because the userspace kni library works
unexpectedly. Compiler [1] is using AVX512 instructions and generated
binary is wrong [2].
It turned around gcc does its job correct, but gas is generating binary
wrong. And expected binutils 2.30, 2.31 & 2.31.1 are affected. Issue has
been fixed in binutils 2.32 with:
Commit x86: don't mistakenly scale non-8-bit displacements
AVX512 was already disabled with bintuils 2.30 [3], extending it to
2.31 & 2.31.1 too.
[1] gcc (GCC) 8.3.1 20190223 (Red Hat 8.3.1-2)
[2] gcc bug: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90028
[3] Bugzilla ID 97 has the details.
Bugzilla ID: 249
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The '-mno-avx512f' compiler flag is not passed to the compiler,
detection of the binutils and setting flags works fine, but the flag
itself not used by compiler.
Removing the interim 'march_opt' variable and using directly
'machine_args' and setting '-mno-avx512f' to 'machine_args'
Fixes: 566b4d7a96 ("build: fix meson check for binutils 2.30")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add RCU library supporting quiescent state based memory reclamation method.
This library helps identify the quiescent state of the reader threads so
that the writers can free the memory associated with the lock less data
structures.
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Steve Capper <steve.capper@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Acked-by: Paul E. McKenney <paulmck@linux.ibm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Jerin Jacob <jerinj@marvell.com>
Tested-by: Ruifeng Wang <ruifeng.wang@arm.com>
Tested-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Mellanox BlueField is armv8 CPU having cortex-a72. The implementor ID is
0x41 (arm) and the primary part number is 0xd08 (cortex-a72).
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Current default cache line size for armv8 CPUs having Implementor ID of
0x41 is 128 bytes, changing it to 64 bytes. Also, the max number of lcores
is changed to 16 from 256.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
When building for generic distribution we need a stable baseline
architecture, or depending on the build worker the result will vary.
Force the default flags if the user explicitly sets machine=default
at configuration time.
Fixes: b1d48c4118 ("build: support ARM with meson")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Define variables for "is_linux", "is_freebsd" and "is_windows"
to make the code shorter for comparisons and more readable.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Within EAL we had a series of if statements for selecting the EAL directory
to use. Now that the directory names match those of the OS's they are for
we can instead just use a generated subdirectory name, shortening the code.
To avoid strange errors, we still need to check for unsupported OS's, but
do this check up-front in the config meson.build file.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Currently, RTE_* flags are set based on the implementer ID but there might
be some micro arch specific differences from the same vendor
eg. CACHE_LINESIZE. Add support to set micro arch specific flags.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Add a new PMD driver for AF_XDP which is a proposed faster version of
AF_PACKET interface in Linux. More info about AF_XDP, please refer to [1]
[2].
This is the vanilla version PMD which just uses a raw buffer registered as
the umem.
[1] https://fosdem.org/2018/schedule/event/af_xdp/
[2] https://lwn.net/Articles/745934/
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
The current value is 10, which is not sufficient for many use-cases.
e.g. NXP LX2 with raw qdma devices can use 32-48 raw devices in some
use-cases. So, making it to 64 to cover various cases.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The rte_stack library provides an API for configuration and use of a
bounded stack of pointers. Push and pop operations are MT-safe, allowing
concurrent access, and the interface supports pushing and popping multiple
pointers at a time.
The library's interface is modeled after another DPDK data structure,
rte_ring, and its lock-based implementation is derived from the stack
mempool handler. An upcoming commit will migrate the stack mempool handler
to rte_stack.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
This patch adds dynamic SGL allocation instead of static one.
The number of element in SGL can be adjusted in each operation
depend of the request.
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
