When a required library is missing on a platform, rather than having
meson report an error about the missing variable, catch the problem
earlier and provide a more readable message.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
To test building all relevant example applications as part of a build, we
add support for the "all" keyword to be passed to the "examples" build
option. Since not all examples can actually be built on all systems,
we also add support for the "build" option inside the sub-dirs. However,
in case where "all" is not used, and a particular example is requested
to be built, we will error out if building the requested app is not
possible.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
When building with meson, set build to false when building unsupported
example apps on FreeBSD.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
The l2fwd-cat example uses the pqos library to work, so make the meson
build dependent on the presence of that library
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
A number of example apps are not supported by the meson build system yet,
but to allow future testing with "-Dexamples=all" we add in a placeholder
meson.build file indicating that the apps should not be built.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
In order to fix this common mistake in all external applications,
the function rte_eth_dev_count is deprecated, while introducing
the new functions rte_eth_dev_count_avail and rte_eth_dev_count_total.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application assume a valid port index is in the range [0..count[.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be valid
- old ports being detached (RTE_ETH_DEV_UNUSED) can be valid
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the function rte_eth_dev_is_valid_port.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be seen
- old ports being detached (RTE_ETH_DEV_UNUSED) can be seen as ghosts
- failsafe sub-devices (RTE_ETH_DEV_DEFERRED) will be seen by the application
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the iterator RTE_ETH_FOREACH_DEV.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
This patch adds vhost_crypto sample application to DPDK.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Jay Zhou <jianjay.zhou@huawei.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Public struct rte_eth_dev_info has a "struct rte_pci_device" field in it
although it is common for all ethdev in all buses.
Replacing pci specific struct with generic device struct and updating
places that are using pci device in a way to get this information from
generic device.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
IP_Pipeline app is not supported in FreeBSD environment. Therefore,
skip it while building the sample apps on FreeBSD.
Fixes: 4bbf8e30aa ("examples/ip_pipeline: add CLI interface")
Fixes: 2f74ae28e2 ("examples/ip_pipeline: add tap object")
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add example to build pipeline with hash table to classify the
ingress traffic.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Add example to built pipeline with ACL table to demonstrate
the firewall operation.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Add example to built pipeline with LPM table to demonstrate layer 3
routing.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Add example to illustrate the pipeline functioning with TAP
interface.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Add example to illustrate the pipeline functioning with KNI
interface.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
This patch add the configuration file for l2fwd example. It
includes commands to build the packet processing stage (pipeline),
defining action, add rules to its table, etc.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Add command to update the dscp table for traffic meter and traffic
manager.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Add commands to add pipeline table entries which contains match and
action part.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Add commands to read the pipeline port in, port out
and table stats.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Add commands to enable and disable the pipeline on the thread.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Add threads data structure and initialisation functions to run
the pipeline.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Add tap object implementation to the application
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Add link object implementation to the application.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
All the actions associated with application pipelines
tables and ports are now implemented using the new action
APIs. Therefore, thousands of lines of code are eliminated
from the application. The reduced code size is easier to
maintain and extend.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Since we have support for the strlcpy function in DPDK, replace all
instances where a string is copied using snprintf.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Application doesn't support more that 64 lcores due to command
line limitation of using a coremask that is parsed as a 64bit
value, so changed it to reflect this limitation.
Coverity issue: 30688
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
The ip_pipeline and qos_meter example apps now use experimental APIs so
this fact needs to be flagged in their meson.build files.
Fixes: c06ddf9698 ("meter: add configuration profile")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch adds support for meter configuration profiles.
Benefits: simplified configuration procedure, improved performance.
Q1: What is the configuration profile and why does it make sense?
A1: The configuration profile represents the set of configuration
parameters for a given meter object, such as the rates and sizes for
the token buckets. The configuration profile concept makes sense when
many meter objects share the same configuration, which is the typical
usage model: thousands of traffic flows are each individually metered
according to just a few service levels (i.e. profiles).
Q2: How is the configuration profile improving the performance?
A2: The performance improvement is achieved by reducing the memory
footprint of a meter object, which results in better cache utilization
for the typical case when large arrays of meter objects are used. The
internal data structures stored for each meter object contain:
a) Constant fields: Low level translation of the configuration
parameters that does not change post-configuration. This is
really duplicated for all meters that use the same
configuration. This is the configuration profile data that is
moved away from the meter object. Current size (implementation
dependent): srTCM = 32 bytes, trTCM = 32 bytes.
b) Variable fields: Time stamps and running counters that change
during the on-going traffic metering process. Current size
(implementation dependent): srTCM = 24 bytes, trTCM = 32 bytes.
Therefore, by moving the constant fields to a separate profile
data structure shared by all the meters with the same
configuration, the size of the meter object is reduced by ~50%.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
This updates the license on files in examples to be the standard
BSD-3-Clause license used for the rest of DPDK,
bringing the files in compliance with the DPDK licensing policy.
Signed-off-by: Lee Daly <lee.daly@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This updates the Intel and Oliver Matz licenses on a file in examples
to be the standard BSD-3-Clause license used for the rest of DPDK,
bringing the files in compliance with the DPDK licensing policy.
Signed-off-by: Lee Daly <lee.daly@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
This updates Hasan Alayli's license to be the standard BSD-3-Clause
license used for the rest of DPDK, bringing the files in compliance
with the DPDK licensing policy.
Signed-off-by: Lee Daly <lee.daly@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
When AES-256 was used aes-128 was printed in the console
Fixes: fa9088849e ("examples/ipsec-secgw: support AES 256")
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Align stats structure to cache line to prevent bouncing per CPU stats
structure between cache lines.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Dustin Lundquist <dustin@null-ptr.net>
Acked-by: Remy Horton <remy.horton@intel.com>
This updates the Intel and IBM license on files in examples to be
the standard BSD-3-Clause license used for the rest of DPDK,
bringing the files in compliance with the DPDK licensing policy.
Signed-off-by: Lee Daly <lee.daly@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
This updates the Intel and Cavium license on files in examples to be
the standard BSD-3-Clause license used for the rest of DPDK, bringing
the files in compliance with the DPDK licensing policy.
Signed-off-by: Lee Daly <lee.daly@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Adding support for AES 256 algorithm in ipsec-secgw application
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
The PTP Client application requires IEEE1588 to be supported
by the network driver used, which needs full Tx data path
to be used.
Fixes: b960219b0d ("examples/ptpclient: convert to new ethdev offloads API")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The timer_period option specified by users via config file
should have unit of 1 millisecond. However timer_period is
internally converted to unit of 10 millisecond.
Fixes: 4e14069328 ("examples/ip_pipeline: measure CPU utilization")
Cc: stable@dpdk.org
Signed-off-by: Bao-Long Tran <longtb5@viettel.com.vn>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>
User can pass portmask with any value, even invalid mask. The code
checks against actual portmask.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The vhost_scsi example application negotiates the
VIRTIO_RING_F_EVENT_IDX feature bit but does not honor it when accessing
vrings.
In particular, commit e37ff95440 ("vhost:
support virtqueue interrupt/notification suppression") broke vring call
because vq->last_used_idx is never updated by vhost_scsi. The
vq->last_used_idx field is not even available via the librte_vhost
public API, so VIRTIO_RING_F_EVENT_IDX is currently only usable by the
built-in virtio_net.c driver in librte_vhost.
This patch drops VIRTIO_RING_F_EVENT_IDX from vhost_scsi so that vring
call works again.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
The binaries and apps in DPDK all need to be linked against the
execinfo library on FreeBSD so add this as a dependency in cases
where it is found. It's available by default on BSD, but not
at all on Linux
Fixes: 16ade738fd ("app/testpmd: build with meson")
Fixes: 89f0711f9d ("examples: build some samples with meson")
Fixes: b5dc795a8a ("test: build app with meson as dpdk-test")
Fixes: 2ff67267b0 ("app/eventdev: build with meson")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Add up to 9s delay for getting link status to make sure NIC updates
link status successfully, just like other applications such as
testpmd and l2fwd.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
Coverity issue: 257008
Fixes: cc7e8ae84f ("examples/bond: add example application for link bonding mode 6")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Current code only sets mac address of first VF. Fix code so that it
continues through the loop and sets the mac address of each VF.
Fixes: c9a4779135 ("examples/vm_power_mgr: set MAC address of VF")
Cc: stable@dpdk.org
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
This patch adds following:
1. Option to configure the mac address during create. Generate random
address only if the user has not provided any valid address.
2. Inform usespace, if mac address is being changed in linux.
3. Implement default handling of mac address change in the corresponding
ethernet device.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fixes: 73db5bad ("net: align ethdev and eal driver names")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Increase the default RX/TX ring sizes to 1024/1024 to
accommodate for NICs with higher throughput (25G, 40G etc)
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Added a check on rte_bbdev_stats_get() return before
printing out the statistics results.
Coverity issue: 257018
Fixes: 1ffee690ea ("examples/bbdev: add sample app")
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
xstats and xstats_names buffers were allocated for
the purpose of printing eth_xstats, but were not
freed before exit.
A fix is added to free before exit points.
Coverity issue: 257013
Fixes: 1ffee690ea ("examples/bbdev: add sample app")
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
eth_address was improperly accessed in bbdev example
app, this patch removes the use of port_id, it is
irrelevant here.
Coverity issue: 257021
Fixes: 1ffee690ea ("examples/bbdev: add sample app")
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Added support for detecting march and mcpu by reading midr_el1 register.
The implementer, primary part number values read can be used to figure
out the underlying arm cpu.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Any flags added to the project args are automatically added to all builds,
both native and cross-compiled. This is not what we want for the -march
flag as a valid -march for the cross-compile is not valid for pmdinfogen
which is a native-build tool.
Instead we store the march flag as a variable, and add it to the default
cflags for all libs, drivers, examples, etc. This will allow pmdinfogen to
compile successfully in a cross-compilation environment.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Since the DPDK build now includes both static and shared libraries, we need
a new way to enable building the examples using either method from the one
installation. To do this, we add in a default "shared" target, and a
separate "static" target which links in the DPDK static libraries. In both
cases, the final application name is symlinked to the last-built static or
shared target, with both binaries able to co-exist in the build directory.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch changes the build process to group all .o files for a driver or
library into a static archive first, and then link the .o files together
into a shared library. This eliminates the need for separate static or
shared object builds when packaging, for instance.
The "default_library" configuration option now only affects the apps and
examples, which are either linked against the static or shared library
versions depending on the value of the option.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Change the example app Makefiles to query if DPDK is installed and
registered using pkg-config. If so, build directly using pkg-config info,
otherwise fall back to using the original build system with RTE_SDK and
RTE_TARGET
This commit changes the makefiles for the basic examples, i.e. those which
do not have multiple subdirectories underneath the main examples dir.
Examples not covered are:
* ethtool
* multi_process
* performance-thread
* quota_watermark
* netmap_compat
* server_node_efd
* vm_power_manager
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Reorder the text in the makefiles, so that the app name and the source
files are listed first. This then will allow them to be shared later in a
combined makefile building with pkg-config and RTE_SDK-based build system.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Add support for having selected example apps built as part of a meson,
ninja build. By default none are built, and those to be built should be
named directly in the -Dexamples='' meson configuration argument.
This is useful for developers working on a feature who want to use a
suitable example, or examples, to test that feature, as they can compile
everything up in one go, and run the example without having to do a ninja
install first.
This commit adds examples which don't consist of multiple apps in
subdirectories to the meson build, so they can be built by default by
passing -Dexamples parameter to meson.
Not included are the following examples:
* ethtool
* multi-process
* netmap_compat
* performance-thread
* quota_watermark
* server_node_efd
* vm_power_manager
To test the apps added here, use the following command, merged to one line,
to add them to your meson build (command to be run inside the build
directory):
meson configure -Dexamples=bbdev_app,bond,cmdline,distributor,\
eventdev_pipeline_sw_pmd, exception_path,helloworld,\
ip_fragmentation,ip_pipeline,ip_reassembly, ipsec-secgw,\
ipv4_multicast,kni,l2fwd-cat,l2fwd-crypto,l2fwd-jobstats,\
l2fwd-keepalive,l2fwd,l3fwd-acl,l3fwd-power,l3fwd-vf,l3fwd,\
link_status_interrupt,load_balancer,packet_ordering,ptpclient,\
qos_meter,qos_sched,rxtx_callbacks,skeleton,tep_termination,\
timer,vhost,vhost_scsi,vmdq,vmdq_dcb
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Luca Boccassi <bluca@debian.org>
Ethdev port id has been extended 16bits from 8bits in DPDK 17.11 release,
the patch fixes mismatch use.
Fixes: 4a3ef59a10 ("examples/flow_filtering: add simple demo of flow API")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fixes: 3da37f6821 ("examples/ipsec_secgw: create session mempools for ethdevs")
Some NICs do not have the rte_security context, this patch fixes the segment fault
caused by this.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Add checks during build to ensure that all symbols in the EXPERIMENTAL
version map section have __experimental tags on their definitions, and
enable the warnings needed to announce their use. Also add an
ALLOW_EXPERIMENTAL_APIS define to allow individual libraries and files
to declare the acceptability of experimental api usage
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Some errors were seen with GCC 4.8 and 4.9.
It looks to be a bug fixed in GCC 5.
examples/eventdev_pipeline/pipeline_worker_generic.c:474:4: error:
missing initializer for field 'queue_id' of 'struct <anonymous>'
examples/eventdev_pipeline/pipeline_worker_generic.c:475:3: error:
missing initializer for field 'priority' of 'struct <anonymous>'
examples/eventdev_pipeline/pipeline_worker_tx.c:630:2: error:
missing initializer for field 'queue_id' of 'struct <anonymous>'
The workaround is to not use initializer statement,
but to use memset and standard assignment.
Fixes: 84dde5de10 ("examples/eventdev: support Rx adapter")
Fixes: fa8054c8c8 ("examples/eventdev: add thread safe Tx worker pipeline")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
After trying RSS and Queue also try End for flow action
to allow for HW that don't support flow features with
inline crypto.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Reviewed-by: Akhil Goyal <akhil.goyal@nxp.com>
SPI field is defined in the RFC2406 [1] as a big endian field it should be
provided in its final form to the drivers through RTE flow.
[1] https://tools.ietf.org/html/rfc2406
Fixes: ec17993a14 ("examples/ipsec-secgw: support security offload")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Mellanox INNOVA NIC needs to have final target queue actions to perform
inline crypto.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Generic flow API have both direction bits, ingress and egress for rules
which may work on both sides.
Fixes: ec17993a14 ("examples/ipsec-secgw: support security offload")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
IPSec application is using index 0 of SA table as error,
with current value of IPSEC_SA_MAX_ENTRIES(128) it can
not support SA with spi = 128, as it uses sa_idx = 0
in the SA table.
With this patch, sa_idx = 0 can also be used.
PS: spi = 0 is an invalid SPI and application throws error
for it.
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
Cc: stable@dpdk.org
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Since the processing of crypto operations may take time
due to hardware offload, all the packets may not be available
in the single dequeue command.
So it may happen that there is leakage of cops, and there is
nobody to dequeue the packets because dequeue of crypto ops is
done only once for a particular queue pair even if it has more
packets in flight.
This patch dequeue the packets again if the inflight packets are
more than the max packet burst.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
When TTL is decremented or ecn is updated in IP header
before forwarding the packet, checksum needs to be updated.
In this patch an incremental checksum is added for ipv4 case.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Packet_type should be updated to remove/add L4 type for
encrypted/decrypted packet
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Previously, ipsec-secgw application did not give user the
flexibility to decide which crypto device(s) will be used.
In this patch, a new cryptodev_mask option is added to the
application. Same as portmask, the cryptodev_mask avails the
user to mask out the unwanted crypto devices in the system.
This patch is similar to the support added in l2fwd-crypto
(d2797f51cc: examples/l2fwd-crypto: add cryptodev mask option)
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Adding support for inline protocol processing
In ingress side, application will receive regular IP packets, without
any IPsec related info. Application will do a selector check (SP-SA
check) by making use of the metadata from the packet. The
device-specific metadata in mbuf would aid in determing the security
session which processed the packet.
In egress side, the plain packet would be submitted to the driver. The
packet will have optional metadata, which could be used to identify the
security session associated with the packet.
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Reviewed-by: Akhil Goyal <akhil.goyal@nxp.com>
When security offload is enabled, the packet should be forwarded on the
port configured in the SA. Security session will be configured on that
port only, and sending the packet on other ports could result in
unencrypted packets being sent out.
This would have performance improvements too, as the per packet LPM
lookup would be avoided for IPsec packets, in inline mode.
Fixes: ec17993a14 ("examples/ipsec-secgw: support security offload")
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Rename eventdev_pipeline_sw_pmd to eventdev_pipeline as it is no longer
specific underlying event device.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add option to configure the mempool size at run time instead of
hardcoding it to 16384 * num_ports.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add optimized eventdev pipeline when ethdev supports thread safe Tx,
number of configured stages is one and all type queue option is enabled.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add optimized eventdev pipeline when ethdev supports thread safe Tx
and number of configured stages is one.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Added configurable option to make queue type as all type queues i.e.
RTE_EVENT_QUEUE_CFG_ALL_TYPES based on event dev capability
RTE_EVENT_DEV_CAP_QUEUE_ALL_TYPES.
This can be enabled by supplying '-a' as a cmdline argument.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add burst mode worker pipeline when Tx is multi thread safe.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add worker pipeline when Tx is multi thread safe.
Probe Ethernet dev capabilities and select it it is supported.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The current work cycles function exchanges source and destination mac
address and also pauses the core for the given cycles.
This patch splits the function into two parts i.e. exchange mac and
pause the cores. The pause cores function is invoked at every stage
where as exchange mac is invoked when packet is transmitted.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Currently, worker uses burst dequeue and burst enqueue to forward events.
Add a non burst mode based on the event dev capabilities.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Each eventdev pipeline needs to allow different cmdline args combination
based on pipeline type.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add framework to support capability based pipeline.
Based on the capability of event device and probed ethernet devices the
optimal pipeline configuration can be chosen.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Move common structures and functions into pipeline_common.h so that they
can be used by different kinds of pipelines.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Use event Rx adapter for packets Rx instead of explicit producer logic.
Use service run iter function for granular control instead of using
dedicated service lcore.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This commit introduces a capability for disabling the "implicit" release
functionality for a port, which prevents the eventdev PMD from issuing
outstanding releases for previously dequeued events when dequeuing a new
batch of events.
If a PMD does not support this capability, the application will receive an
error if it attempts to setup a port with implicit releases disabled.
Otherwise, if the port is configured with implicit releases disabled, the
application must release each dequeued event by invoking
rte_event_enqueue_burst() with RTE_EVENT_OP_RELEASE or
RTE_EVENT_OP_FORWARD.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
- sample application performing a loop-back over ethernet using
a bbbdev device
- 'turbo_sw' PMD must be enabled for the app to be functional
- a packet is received on an ethdev port -> enqueued for baseband
encode operation -> dequeued -> enqueued for baseband decode
operation-> dequeued -> compared with original signal -> looped-back
to the ethdev port
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Remove RTE_LOG_LEVEL config option, use existing RTE_LOG_DP_LEVEL config
option for controlling datapath log level.
RTE_LOG_LEVEL is no longer needed as dynamic logging can be used to
control global and module specific log levels.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
Ethdev offloads API has changed since:
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
This commit support the new API.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
For vhost sample, the operation if (dev_info.max_rx_queues >
MAX_QUEUES) in the function port_init causes startup failure
when using X710(i40e driver). X710 requires that MAX_QUEUES
should be defined no less than 320, however it is defined as
128 currently.
Such checking is overkill and Removal don't affect any
functionality (have already validated ixgbe and i40e).
The removal can avoid similar issue when introduing new physical NIC.
Fixes: 8bd6c395a5 ("examples/vhost: increase maximum queue number")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
ARP packets are not dropped when dest vdev is itself, which breaks
RX ring inconspicuously.
Fixes: 9c5ef51207 ("examples/vhost: handle broadcast packet")
Cc: stable@dpdk.org
Signed-off-by: Junjie Chen <junjie.j.chen@intel.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
Users of librte_vhost currently implement the vring call operation
themselves. Each caller performs the operation slightly differently.
This patch introduces a new librte_vhost API called
rte_vhost_vring_call() that performs the operation so that vhost-user
applications don't have to duplicate it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yliu@fridaylinux.org>
This example does not have the process to set up the Tx queues,
which is required by Intel NICs. So this patch adds that Tx setup
to the application.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Ori Kam <orika@mellanox.com>
This application does not need Link Status Interrupt.
It will cause failure for the platforms not supporting LSC.
Signed-off-by: Nikhil Agarwal <nikhil.agarwal@linaro.org>
Acked-by: David Hunt <david.hunt@intel.com>
HW queue based platforms may not support descriptor done API.
This patch changes the usages to rx_queue_count API, which
is more generic.
Signed-off-by: Nikhil Agarwal <nikhil.agarwal@linaro.org>
Acked-by: David Hunt <david.hunt@intel.com>
The code assumes that the platform frequency is 2GHz.
This patch add support for dynamically detecting platform frequence.
Fixes: d7937e2e3d ("power: initial import")
Cc: stable@dpdk.org
Signed-off-by: Nikhil Agarwal <nikhil.agarwal@linaro.org>
Acked-by: David Hunt <david.hunt@intel.com>
This existing code cause the platform to start receiving packet
immediately irrespective of interrupts available or not.
If the platform does not support Rx interrupt, it shall not start
receiving packets immediately. It shall let the timer management work.
Fixes: aee3bc79cc ("examples/l3fwd-power: enable one-shot Rx interrupt and polling switch")
Cc: stable@dpdk.org
Signed-off-by: Nikhil Agarwal <nikhil.agarwal@linaro.org>
Acked-by: David Hunt <david.hunt@intel.com>
The l3fwd program became chatty, and the code looks cluttered in
recent versions. DPDK programs should try for Unix (not VMS) style
and not print messages for the options user selected. Also, errors should
be printed on stderr. To make it easier to find code matching error
messages; error strings should be placed in situ rather than saved
as string vaiables.
Fixes: 268888b5b0 ("examples/l3fwd: modularize")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Make pktmbuf pool size a function of ports and lcores detected instead
of using constant 8192.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Removed rte_eth_dev_info_get() calls and declaration of
struct rte_eth_dev_info where info is not used anymore.
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch removes table id parameter from all the flow
classify apis to reduce the complexity alongwith some code
cleanup.
The validate api is exposed as public api to allow user
to validate the flow before adding it to the classifier.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Repeated occurrences of 'the'.
The change was obtained using the following command:
sed -i "s;the the ;the ;" `git grep -l "the "`
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
On SUSE11 with gcc 4.5.1 the following build error occurred,
most likely because of improper handling of annonymous unions:
examples/ipsec-secgw/ipsec.c:87:4 error:
unknown field ‘ipsec’ specified in initializer
Fixes: ec17993a14 ("examples/ipsec-secgw: support security offload")
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This application shows a simple usage of the
rte_flow API for hardware filtering offloading.
In this demo we are filtering specific IP to
specific target queue, while sending all the
rest of the packets to other queue.
Signed-off-by: Ori Kam <orika@mellanox.com>
All PCI functionality should be hidden from apps via the PCI bus driver,
the EAL and individual device drivers. Therefore remove the inclusion of
rte_pci.h from sample apps.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Check return value of fseek and exit if non zero.
Coverity issue: 143435
Fixes: bab16ddaf2 ("examples/flow_classify: add sample application")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
With -f-strict-aliasing enabled by default from -O2, gcc > 5.x gives
undefined behavior in port_groupx4 in ARM. 'pn' and 'pnum' are
two different pointers pointing to same chunk of memory and
with -f-strict-aliasing the pointers are assumed to be pointing to
different memory and compiler reorders instructions that depend on
pnum and pn. This breaks port grouping algorithm.
This patch eliminates the above problem by introducing a compiler
barrier between the instructions that depend on pnum, pn and lp.
Fixes: 569b290cdb ("examples/l3fwd: add NEON implementation")
Cc: stable@dpdk.org
Signed-off-by: Guduri Prathyusha <gprathyusha@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Jianbo Liu <jianbo.liu@arm.com>
To group consecutive packets with same destination port in bursts of 4
neon intrinsic data types dp1 and dp2 are calculated such that if
dst_port[]={a,b,c,d,e,f,g,h,i...} dp1 should contain: <a,b,c,d> and
dp2 should contain: <b,c,d,e> in the first iteration. dp1 should
be <e,f,g,h> and dp2 should be <f,g,h,i> in the next iteration.
Whereas the existing code incorrectly calculates dp1 as <d,e,f,g> from
second iteration.
This patch fixes the incorrect ARM NEON instructions on dp1.
Fixes: 569b290cdb ("examples/l3fwd: add NEON implementation")
Cc: stable@dpdk.org
Signed-off-by: Guduri Prathyusha <gprathyusha@caviumnetworks.com>
Acked-by: Jianbo Liu <jianbo.liu@arm.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Implement the same hash functions with crc32 on arm platform.
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Hash table function will check if the input bucket size is power of 2,
so the parameter should be rounded up before sending to the creating
function.
Signed-off-by: Jianbo Liu <jianbo.liu@arm.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This commit fixes a possible race condition if an application
uses the service-cores infrastructure and the function to run
a service on an application lcore at the same time.
The fix is to change the num_mapped_cores variable to be an
atomic variable. This causes concurrent accesses by multiple
threads to a service using rte_service_run_iter_on_app_lcore()
to detect if another core is currently mapped to the service,
and refuses to run if it is not multi-thread safe.
The run iteration on app lcore function has two arguments, the
service id to run, and if atomics should be used to serialize access
to multi-thread unsafe services. This allows applications to choose
if they wish to use use the service-cores feature, or if they
take responsibility themselves for serializing invoking a service.
See doxygen documentation for more details.
Two unit tests were added to verify the behaviour of the
function to run a service on an application core, testing both
a multi-thread safe service, and a multi-thread unsafe service.
The doxygen API documentation for the function has been updated
to reflect the current and correct behaviour.
Fixes: e9139a32f6 ("service: add function to run on app lcore")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Renamed data type from phys_addr_t to rte_iova_t.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The following inline functions and macros have been renamed to be
consistent with the IOVA wording:
rte_mbuf_data_dma_addr -> rte_mbuf_data_iova
rte_mbuf_data_dma_addr_default -> rte_mbuf_data_iova_default
rte_pktmbuf_mtophys -> rte_pktmbuf_iova
rte_pktmbuf_mtophys_offset -> rte_pktmbuf_iova_offset
The deprecated functions and macros are kept to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The function rte_malloc_virt2phy() is renamed to rte_malloc_virt2iova().
The deprecated name is kept as an alias to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The memzone header is often included without good reason.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
It is easier to find all constructor functions when they use
the same macros RTE_INIT or RTE_INIT_PRIO.
The macro definitions are moved from rte_eal.h to rte_common.h.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Simple_mp example receives message size less than 64 chars while send
side accepts chars less than 128, this leads to different result when
sending text length larger than 64.
This patch uses same buffer length on both message pool and command
line.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Update the sample app eventdev_pipeline_sw_pmd to use service run iter for
event scheduling in case of sw eventdev.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
With the current scheme of event queue configuration the cfg schedule
type macros (RTE_EVENT_QUEUE_CFG_*_ONLY) are inconsistent with the
event schedule type (RTE_SCHED_TYPE_*) this requires unnecessary
conversion between the fastpath and slowpath API's while scheduling
events or configuring event queues.
This patch aims to fix such inconsistency by using event schedule
types (RTE_SCHED_TYPE_*) for event queue configuration.
This patch also fixes example/eventdev_pipeline_sw_pmd as it doesn't
convert RTE_EVENT_QUEUE_CFG_*_ONLY to RTE_SCHED_TYPE_* which leads to
improper events being enqueued to the eventdev.
Fixes: adb5d5486c ("examples/eventdev_pipeline_sw_pmd: add sample app")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Build fails when rte_security is disabled; make rte_security mandatory
Fixes: ec17993a14 ("examples/ipsec-secgw: support security offload")
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Tested-by: David Marchand <david.marchand@6wind.com>
Ipsec-secgw application is modified so that it can support
following type of actions for crypto operations
1. full protocol offload using crypto devices.
2. inline ipsec using ethernet devices to perform crypto operations
3. full protocol offload using ethernet devices.
4. non protocol offload
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
For AEAD algorithms, the physical address for the digest
was being set incorrectly.
Fixes: 2661f4fbe9 ("examples/l2fwd-crypto: add AEAD parameters")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
According to rfc4106 the IV should be unique and can be implemented
as counter.
The changed was created because putting an analyzer on wire and
comparing packets generated by this application and Linux kernel.
Linux kernel sets IV as BE, so it is worth to do the same for
future debug / comparison.
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Search for session also with AEAD algorithms.
Fixes: 501e9c226a ("examples/ipsec-secgw: add AEAD parameters")
Cc: stable@dpdk.org
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
AEAD algorithms were not being added in the mapping
between algorithms and crypto devices, only cipher and
authentication chained algorithms.
Fixes: 501e9c226a ("examples/ipsec-secgw: add AEAD parameters")
Cc: stable@dpdk.org
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
IPv6 payload length header field should contain only the number of bytes
following the IPv6 header and not the entire packet size.
Fixes: f159e70b09 ("examples/ipsec-secgw: support transport mode")
Fixes: 906257e965 ("examples/ipsec-secgw: support IPv6")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Fix port id issues and keep variables related to port ids in
consistent data type definition "uint16_t".
Remove unnecessary cast in the meanwhile.
Fixes: f8244c6399 ("ethdev: increase port id range")
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Since new_ip and ip4 are overlapping buffers copying ip4 over new_ip
using memmove() might overwrite memory at ip4. This could happen if
following condition holds:
ip_hdr_len > sizeof(struct esp_hdr) + sa->iv_len
Thus using ip4 to check ip version is wrong as it might not contain
proper value.
Fixes: f159e70b09 ("examples/ipsec-secgw: support transport mode")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Reviewed-by: Aviad Yehezkel <aviadye@mellanox.com>
Use snprintf instead strncpy to get safe null string termination.
There was possible to get not terminated string after strncpy operation.
Coverity issue: 158631
Fixes: db75c7af19 ("examples/vhost_scsi: introduce a new sample app")
Cc: stable@dpdk.org
Signed-off-by: Jacek Piasecki <jacekx.piasecki@intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Since virtual devices, i.e mrvl net pmd, do not touch pci_dev
dereferencing it will cause segmentation fault as by default
it's set to NULL in rte_eth_dev_info_get().
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fix problem with uninitialized rx/tx deferred_start flags of the struct
rte_eth_rxconf/txconf by initializing with 0 value (deferred start of
the rx/tx queues is turned off). This setting allows device rx/tx
queues to start with rte_eth_dev_start().
Coverity issue: 194999, 195009
Fixes: de3cfa2c98 ("sched: initial import")
Cc: stable@dpdk.org
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
A delay in the loop waiting for the virtio-serial commands in the
vm_power_manager app was causing a lag in the response time. This was
set to 1 second, and has now been changed to 1ms.
Fixes: f14791a812 ("examples/vm_power_mgr: add policy to channels")
Signed-off-by: David Hunt <david.hunt@intel.com>
This commit adds a new sample app, which showcases the value
of running services. In particular it allows the application
to dynamically schedule services to service-cores.
The sample app itself registers a number of dummy services,
and applies different profiles to them at runtime. Note that
this sample application does not forward any traffic - it
demonstrates advanced usage of the service cores API.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Gage Eads <gage.eads@intel.com>
The flow_classify sample application exercises the following
librte_flow_classify API's:
rte_flow_classifier_create
rte_flow_classifier_query
rte_flow_classify_table_create
rte_flow_classify_table_entry_add
rte_flow_classify_table_entry_delete
It sets up the IPv4 ACL field definitions.
It creates table_acl and adds and deletes rules using the
librte_table API.
It uses a file of IPv4 five tuple rules for input.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
Introduce mask-based hash functions in hash_func.h.
Propagate their usage in test/test, test/test-pipeline and
examples/ip_pipeline.
Remove the non-mask-based hash function prototype from API (which
was previously used as build workaround).
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Rework for the 16-byte key hash tables (both the extendible
bucket and LRU)to use the mask-based hash function and the
unified parameter structure.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Rework for the 8-byte key hash tables (both the extendible
bucket and LRU)to use the mask-based hash function and the
unified parameter structure.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Rework for the variable size key extendible bucket (EXT) hash
table to use the mask-based hash function and the unified
parameter structure.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add unified parameter structure for all hash tables in librte_table.
Add mask-based hash function prototype, which is input parameter for
all hash tables.
Renamed the non-mask-based hash function prototype and all the calls
to it (to be removed later).
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The non-dosig version of the variable size key extendible bucket
hash tables are removed. The remaining hash tables are renamed to
eliminate the dosig particle from their name.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The non-dosig version of the 16-byte key hash tables (both extendable
bucket and LRU) are removed. The remaining hash tables are renamed to
eliminate the dosig particle from their name.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The non-dosig version of the 8-byte key hash tables (both extendable
bucket and LRU) are removed. The remaining hash tables are renamed to
eliminate the dosig particle from their name.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Removing calls to hash tables that are going to be removed later.
The calls are removed from test/test, test/test-pipeline,
examples/ip_pipeline.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The list of libraries in LDLIBS was generated from the DEPDIRS-xyz
variable. This is valid when the subdirectory name match the library
name, but it's not always the case, especially for PMDs.
The patches removes this feature and explicitly adds the proper
libraries in LDLIBS.
Some DEPDIRS-xyz variables become useless, remove them.
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Gage Eads <gage.eads@intel.com>
Overrunning array per_lcore_this_sched->current_lthread->tls->data of
1024 8-byte elements at element index 1024 using index k.
Fixed by correct check k condition.
Coverity issue: 143462, 143463
Fixes: 116819b9ed ("examples/performance-thread: add lthread subsystem")
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Overrunning array schedcore of 128 8-byte elements at element index 128
using index core id.
Fixed by correct check index lcoreid condition and
change type of lcoreid to unsigned.
Coverity issue: 143459, 143461
Fixes: 116819b9ed ("examples/performance-thread: add lthread subsystem")
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
There was a call for thread create function without result check.
Added result check and message printout after failure.
Coverity issue: 143441
Fixes: 433ba6228f ("examples/performance-thread: add pthread_shim app")
Signed-off-by: Jacek Piasecki <jacekx.piasecki@intel.com>
Acked-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Use of rte_mempool_create() with the helper provided in
librte_mbuf: rte_pktmbuf_pool_create().
This is the preferred way to create a mbuf pool else
it may not work on implementation using the HW buffer pool
Signed-off-by: Ashish Jain <ashish.jain@nxp.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds altivec support for lpm packet processing in powerpc.
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Add return value check and error handling for fseek call.
Coverity issue: 143435
Fixes: 361b2e9559 ("acl: new sample l3fwd-acl")
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Zhiyong Yang <zhiyong.yang@intel.com>
Some invalid callback functions are provided to rte_pktmbuf_pool_init()
without their associated data causing a segmentation fault when the
function tries to use it. In this example, those callbacks are not
necessary, they can be safely replaced by NULL pointers.
Fixes: 95e8005a56 ("examples/l2fwd_fork: new app")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Current version is compatible with PQOS version 1.3
but not compatible with higher versions. This change
makes l2fwd-cat example compatible with versions since 1.4
Signed-off-by: Vladimir Kuramshin <v.kuramshin@samsung.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Remove variable declaration from within for loop.
Fixes: f14791a812 ("examples/vm_power_mgr: add policy to channels")
Signed-off-by: David Hunt <david.hunt@intel.com>
In order to achieve fully reproducible builds, always use the same
inclusion order for headers in the Makefiles.
Signed-off-by: Luca Boccassi <luca.boccassi@gmail.com>
According to the API, AES-CCM has special requirements
when setting IV and AAD fields.
The L2fwd-crypto app is updated to set the nonce (IV)
and AAD in the right positions in these two fields
(1 byte after start of IV field and 18 bytes after start
of AAD).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
errno should be initialized to 0 before calling strtol
Fixes: 1df9c0109f ("examples/l2fwd-crypto: parse key parameters")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reviewed-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
We need to set vf mac from the host, so that they will be in sync on the
guest and the host. Otherwise, we'll have a random mac on the guest, and
a 00:00:00:00:00:00 mac on the host.
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Here we're adding an example of setting up a policy, and allowing the
vm_cli_guest app to send it to the host using the cli command
"send_policy now"
Signed-off-by: Nemanja Marjanovic <nemanja.marjanovic@intel.com>
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
We need to initialise the port's we're monitoring to be able to see
the throughput.
Signed-off-by: Nemanja Marjanovic <nemanja.marjanovic@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Reviewed-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Events sent through single-link queues are naturally in-order and
atomic, without reordering or atomic scheduling. Logically the
nb_atomic_flows and nb_atomic_order_sequences arguments don't apply to a
single link queue, but applications must set these (depending on the queue
config type) to bypass the is_valid_{ordered, atomic}_queue_conf() checks
in the eventdev layer.
This commit updates those is_valid_* functions to ignore queues with the
SINGLE_LINK flag, to simplify their configuration.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add extra commands to guest cli to allow enable/disable of
per-core turbo. Includes messages to vm_power_mgr in host.
Signed-off-by: David Hunt <david.hunt@intel.com>
Add extra commands to command line to allow enable/disable of
per-core turbo.
When a core has turbo enabled, calling for max frequency will allow it to
go to a turbo frequency (P0n).
When a core has turbo disabled, calling for max frequency will allow it to
go to the maximum non-turbo frequency (P1), but not beyond.
Signed-off-by: David Hunt <david.hunt@intel.com>
During the refactoring of the sample app to be more generic, the
option to set -n0 and process a huge number of packets was lost.
This commit re-adds -n0, and will process INT64_MAX number of packets.
Fixes: adb5d5486c ("examples/eventdev_pipeline_sw_pmd: add sample app")
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Fix a typo that cause IPv6 packet type not be parsed.
Fixes: 71a7e2424e ("examples/l3fwd: fix using packet type blindly")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
