4 and 8 TCs are supported on ixgbe. By default there're
8 TCs. So when initializing the device, the bandwidth for
8 TCs is set.
When changing the TC number, it's only considered setting
the bandwidth for 4 TCs. If the user change the number
from 4 to 8, the TCs' bandwidth is not right.
Fixes: 0807f80d35 ("ixgbe: DCB / flow control")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Without setting the id, calling xstats_get twice with same array causes
memory corruption.
Also, if IXGBEVF_NB_XSTATS will be different than 1 in the future,
this will cause issues.
Fixes: 156712ba40 ("ixgbevf: add extending stats")
Signed-off-by: Ido Barnea <ibarnea@cisco.com>
All kinds of filter need to hardware mac type check
to make sure the hardware support that type of filter.
If not, it may cause serious issue.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Fixes: 672be56d76 ("net/ixgbe: parse n-tuple filter")
Fixes: eb3539fc85 ("net/ixgbe: parse ethertype filter")
Fixes: 429f6ebb42 ("net/ixgbe: parse TCP SYN filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Move ixgbe 2 mac type check macros to ixgbe_ethdev.h in
order to be used by filter parser functions in file
ixgbe_flow.c.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Delete useless function declarations in file ixgbe_flow.c and
adjust function definition position to avoid compile error.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
In SRIOV case, ETH_MQ_RX_VMDQ_DCB and ETH_MQ_RX_DCB should be considered as
the same meaning, due to the multi-queue mapping is the same SRIOV and VMDq
in ixgbe.
Fixes: 27b609cbd1 ("ethdev: move the multi-queue mode check to specific drivers")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
DCB is split to RX and TX mode. All-queues-drop is set for TX mode.
It's not appropriate because all-queue-drop is a RX feature.
Move this setting from TX to RX.
Fixes: f3f9b17bb8 ("net/ixgbe: support multiqueue mode VMDq DCB with SRIOV")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The function is not defined anywhere, remove it.
Fixes: 0eb609239e ("ixgbe: enable Rx queue interrupts for PF and VF")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
In the IOV scenario, multi Rx queues can be assigned to one VF.
If the dropping is not enabled, when no descriptors are available
for one queue, this queue can block others.
Fixes: 00e30184da ("ixgbe: add PF support")
Cc: stable@dpdk.org
Suggested-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
* Add link block check for KR.
* Complete HW initialization even if SFP is not present.
* Add VF xcast promiscuous mode.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Fix ICC build error by removing the EWARN third parameter.
Build error:
.../drivers/net/ixgbe/base/ixgbe_phy.c(1543):
error #268: the format string ends before this argument
EWARN(hw, "WARNING: Intel (R) Network "
^
.../drivers/net/ixgbe/base/ixgbe_phy.c(1805):
error #268: the format string ends before this argument
EWARN(hw, "WARNING: Intel (R) Network "
^
Fixes: aa4fc14d2c ("ixgbe: update base driver")
Fixes: b94a06c1b4 ("ixgbe/base: support qsfp and lco")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add the support of xcast promiscuous mode. It's
added in mailbox v1.3.
Move the definition of xcast mode to base code.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Disable Ethernet Flow Control (FC) for device 15B0.
Make sure that ixgbe_device_supports_autoneg_fc()
returns false and hw->fc.disable_fc_autoneg is set
to true to avoid running the fc_autoneg function
for the device 15B0, as this device doesn't support
this function.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
If SFP module is not present, reset_hw doesn't return success.
SW should complete the initialization, or with specific module
it resulted in no link when the module was later inserted.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add a L3/L4 filtering definition of Multiple Receive Queues Command
(MRQC) register for the future use.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When setting up link on x550 KR devices, should check
if there are constraints on link from manageability, which
may result in link loss.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The check of queue_id is done in all drivers implementing
rte_eth_rx_queue_count(). Factorize this check in the generic function.
Note that the nfp driver was doing the check differently, which could
induce crashes if the queue index was too big.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Use vlan_mask->tci as big endian since this is how rte flow defines it.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Fixes: 37ed39b4e6 ("net/ixgbe: add TCI mask check for flow director")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Vector PMD will check 4 descs in one time, but the statuses are not
consistent because the memory allocated for RX descriptors is cacheable
huagepage.
This patch is to calculate the number of received packets by scann DD bit
sequentially, and stops when meeting the first packet with DD bit unset.
Fixes: b20971b6cc ("net/ixgbe: implement vector driver for ARM")
Cc: stable@dpdk.org
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
To get better performance, Rx bulk alloc recv function will scan 8 descs
in one time, but the statuses are not consistent on ARM platform because
the memory allocated for Rx descriptors is cacheable hugepages.
This patch is to calculate the number of received packets by scan DD bit
sequentially, and stops when meeting the first packet with DD bit unset.
Fixes: 7431041062 ("ixgbe: allow rx bulk alloc")
Cc: stable@dpdk.org
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
dev_flags is wrongly overwritten with RTE_ETH_DEV_DETACHABLE value
in drivers after rte_eth_copy_pci_info().
Previous values of the dev_flags set in rte_eth_copy_pci_info(),
like RTE_ETH_DEV_INTR_LSC, are get lost. That will fail the device
configuration.
Fix by preventing dev_flags overwritten.
Fixes: 22dda618c0 ("pci: separate detaching ethernet ports from PCI devices")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Jeff Guo <jia.guo@intel.com>
For PMD specific API it is required to check if provided port id is for
a supported device.
It's not appropriate to call rte_eth_dev_info_get in PMD, as
rte_eth_dev_info_get need to get info from PMD.
Remove rte_eth_dev_info_get from PMD code and get the info directly.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
VNI of VXLAN is parsed wrongly. The root cause is that
VNI array in VXLAN item also uses network byte ordering.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Add more check on the tci mask of VLAN and VXLAN parser
in fdir filter rule pattern parser. If such check not added,
it maybe cause error in fdir configuration set check.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Current ixgbevf driver get max_rx_pktlen = 15872, but in fact PF
supports 15872-byte jumbo frame and VF only supports 9728-byte jumbo
frame. If VF is running DPDK driver and set frame_size > 9728 ,PF
running kernel ixgbe driver will report an error and set VF failed.
This patch fixs DPDK ixgbevf driver to get correct jumbo frame size
of VF.
More datasheet references from Wei Dai:
In 82599 datasheet, there is an annotation in the chapter 1.3 Features
Summary (page 29)
The 82599 supports full-size 15.5 KB (15872-byte) jumbo packets while
in a basic mode of operation. When DCB mode is enabled,
or security engines enabled or virtualization is enabled, the 82599
supports 9.5 KB (9728-byte) jumbo packets.
In x540 datasheet, there is also an annotation in the chapter 1.3
Features Summary (page 13)
The X540 and 82599 support full-size 15.5 KB jumbo packets while in a
basic mode of operation. When DCB mode is enabled,
or security engines enabled, or virtualization is enabled, or OS2BMC is
enabled, then the X540 supports 9.5 KB jumbo packets.
Packets to/from MC longer than 2KB are filtered out.
In x550 datasheet, there is still also an annotation in the chapter 1.4
Feature Summary (page 23)
All the products support full-size 15.5 KB jumbo packets while in a
basic mode of operation. When DCB mode is enabled, or security
engines enabled, or virtualization is enabled, or OS2BMC is enabled,
then only 9.5 KB jumbo packets are supported. Packets to/
from the MC longer than 2 KB are filtered out.
Fixes: 2144f6630f ("ixgbe: add redirection table size in device info")
Cc: stable@dpdk.org
Signed-off-by: Yi Zhang <zhang.yi75@zte.com.cn>
Acked-by: Wei Dai <wei.dai@intel.com>
Add checks to rte_pmd_ixgbe_macsec_* APIs to ensure that the
port is an ixgbe port.
Fixes: b35d309710 ("net/ixgbe: add MACsec offload")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Ignore the error=IXGBE_ERR_SFP_NOT_PRESENT when SFP is not present.
If it is not ignored, testpmd will fail during the NIC initialization
process.
Ixgbe kernel driver ignores this error and works well. So DPDK
does same thing.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
While handling link status change (LSC) interrupt, all interrupts are
blocked until delayed interrupt handler finishes.
The wait duration is at least one second and this may cause timeouts in
VF to PF mailbox.
Make sure only LSC interrupt is blocked while waiting for delayed
interrupt handler to finish.
Fixes: 0a45657a67 ("pci: rework interrupt handling")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Replace the raw I/O device memory read/write access with eal
abstraction for I/O device memory read/write access to fix
portability issues across different architectures.
CC: Helin Zhang <helin.zhang@intel.com>
CC: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch adds a function to flush all the filter list
filter on a port.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
This patch adds a function to destroy the flow filter.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
This patch adds a function to create the flow directory filter.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
check if the rule is a flow director rule, and get the flow director info.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
check if the rule is a L2 tunnel rule, and get the L2 tunnel info.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
check if the rule is a TCP SYN rule, and get the SYN info.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
check if the rule is a ethertype rule, and get the ethertype info.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add rule validate function and check if the rule is a n-tuple rule,
and get the n-tuple info.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for flush all the filters in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for store and restore L2 tunnel filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for restoring L2 tunnel filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for storing flow director filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for restoring TCP SYN filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for restoring ether type filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
