Reconstructing IPv6 header after encryption or decryption requires
updating 'next header' value in the preceding protocol header, which
is determined by parsing IPv6 header and iteratively looking for
next IPv6 header extension.
It is required that 'l3_len' in the mbuf metadata contains a total
length of the IPv6 header with header extensions up to ESP header.
Fixes: 4d7ea3e1459b ("ipsec: implement SA data-path API")
Cc: stable@dpdk.org
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Introduce new function for IPv6 header extension parsing able to
determine extension length and next protocol number.
This function is helpful when implementing IPv6 header traversing.
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch fixes the out-of-bounds coverity issue by adding
missed algorithms to the array.
Coverity issue: 337683
Fixes: c68d7aa354f6 ("crypto/aesni_mb: use architecture independent macros")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Adding a new field, ff_disable, to allow applications to control the
features enabled on the crypto device. This would allow for efficient
usage of HW/SW offloads.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Reorg within Intel teams causing transfer of maintainership
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch adds an option to support both IV (of all supported sizes)
and J0 when using Galois Counter Mode of crypto operation.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Added info about socket id used by compression perf
test process and by the driver
Signed-off-by: Tomasz Cel <tomaszx.cel@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Artur Trybula <arturx.trybula@intel.com>
Fixed some typos and clarified how errors on ops which
fail to get submitted on the enqueue API should be handled.
Fixes: a584d3bea902 ("doc: add compressdev library guide")
Cc: stable@dpdk.org
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
ANSI C memcmp is not constant time function per spec so it should
be avoided in cryptography usage.
Fixes: d61f70b4c918 ("crypto/libcrypto: add driver for OpenSSL library")
Cc: stable@dpdk.org
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
The format for printing float is incorrect for the following fields
in pmd-cyclecount test: Cycles/Op,Cycles/Enq,Cycles/Deq.
Currently, the format is %.f3. This format will round off the number to
the nearest integer and append a 3 after that.
This patch changes the format to %.3f. This will print the number as a
floating point with a precision of 3 fractional digits.
Fixes: 96dfeb609be1 ("app/crypto-perf: add new PMD benchmarking mode")
Cc: stable@dpdk.org
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
A bad formula was copied and pasted.
Fixes: 4935e1e9f76e ("bbdev: introduce wireless base band device lib")
Fixes: 0318c02b57cf ("doc: add cryptodev chapter in prog guide")
Fixes: a9bb0c44c775 ("doc: add rawdev library guide and doxygen page")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
test_data->input_data_sz is passed to a parameter that
cannot be negative.
Coverity issue: 328504
Fixes: b68a82425da4 ("app/compress-perf: add performance measurement")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
The release function was using qp->stream after already
releasing it and the null pointer checking was missing.
Also since rte_free(NULL) is a no-op, remove unnecessary
checks for NULL.
Coverity issure: 340860
Fixes: dc49e6aa4879 ("compress/isal: add ISA-L compression functionality")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Lee Daly <lee.daly@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
- Include list of supported adapters.
- Include list of supported features.
- Document requirements for vector mode PMD.
- Remove obsolete limitation (scatter rx has been supported for
some time).
- Fixed broken links.
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
When adding offloads from commandline, not only port
related configuration bits should be set, but also queue
related offloads configuration bits, or it will cause error.
For example, test in this process for ixgbe:
(1)./x86_64-native-linuxapp-gcc/app/testpmd -c 0x6 -n 4
-- -i --portmask=0x1 --port-topology=loop --disable-crc-strip
(2)port stop all
(3)port config all crc-strip on
(4)port start all
we will see "Fail to configure port 0 rx queues" of warning info.
Fixes: 0074d02fca21 ("app/testpmd: convert to new Rx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
rte_calloc functions returns a non-null pointer in case of
success and null pointer in case of failure.
The return value should be checked and the function flow
should take that into consideration.
This patch adds a check for rte_calloc return value in function
flow_list_create.
Fixes: 84c406e74524 ("net/mlx5: add flow translate function")
Cc: stable@dpdk.org
Signed-off-by: Asaf Penso <asafp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
mlx5_link_update uses the newer ethtool command
ETHTOOL_GLINKSETTINGS to determine interface capabilities but falls
back to the older (deprecated) ETHTOOL_GSET command if the new
method fails for any reason.
The older method only supports reporting of capabilities up to 40G.
However, mlx5_link_update_unlocked_gs can return a failure for a
number of reasons (including the link being down).
Using the older method in cases of transient failure of the method
can result in reporting of reduced capabilities to the application.
The older method (mlx5_link_update_unlocked_gset) should only be
invoked if the newer method returns EOPNOTSUPP.
Fixes: 7d2e32f76cfc ("net/mlx5: fix ethtool link setting call order")
Cc: stable@dpdk.org
Reported-by: Srinivas Narayan <srinivas.narayan@att.com>
Signed-off-by: Asaf Penso <asafp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This commit removes the support of configuring the device E-switch
using TCF since it is now possible to configure it via DR (direct
verbs rules), and by that to also remove the PMD dependency in libmnl.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
mlx5 implements mlx5_flow_null_drv_ops to be used when a specific
flow typei/driver is not available or invalid.
This routines return error without modifying the rte_flow_error
parameter passed to them which causes testpmd, for example, to crash.
This commit addresses the issue by modifying the rte_flow_error
parameter in theses routines.
Fixes: 0c76d1c9a18d ("net/mlx5: add abstraction for multiple flow drivers")
Fixes: 684dafe795d0 ("net/mlx5: add flow query abstraction interface")
Cc: stable@dpdk.org
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Add support for setting the link up and down.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
This patch implements rx interrupts feature required for power
saving. These interrupts can be enabled/disabled on demand.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add MTU set operation and MTU update feature.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add device start operation and update the correct
function pointers for Rx and Tx burst functions.
This patch also update the octeontx2 NIC specific documentation.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Add vector version of packet Receive function.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Implement support for setting VLAN TPID and PVID for Tx packets.
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Support setting up VLAN filters so as to allow tagged
packet's reception after VLAN HW Filter offload is enabled.
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Support configuring VLAN offloads for an ethernet device and
dynamic promiscuous mode configuration for VLAN filters where
filters are updated according to promiscuous mode of the device.
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Adding the flow init and fini functionality. These will be called from
dev init and will initialize and de-initialize the flow related memory.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Adding few more flow operations like flow_destroy, flow_isolate
and flow_flush.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Adding the initial flow ops like flow_create and flow_validate.
These will be used to alloc and write flow rule to device and
validate the flow rule.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Adding support to parse flow actions like drop, count, mark, rss, queue.
On egress side, only drop and count actions were supported.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
Adding functionality to parse inner layers from la to lc.
These will be used to parse inner layers L2, L3, L4 types.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Vivek Sharma <viveksharma@marvell.com>
