Default Redirection Table that is set in bonding driver is distributed
evenly over all Rx queues only within every RETA group (the first RETA
entries in every group are always start with zero). But in the most
drivers, default RETA is distributed over all Rx queues without sequence
resets in the beginning of a new group, which implies more balanced
per-core load.
Change the default RETA to be evenly distributed over all Rx queues
considering the whole table.
Fixes: 734ce47f71 ("bonding: support RSS dynamic configuration")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Chas Williams <chas3@att.com>
Add flow operations to match packets based on destination MAC address.
Allocate and program hardware MPS table with the destination MAC
address to be matched against. The returned MPS index is then used while
offloading flows to LETCAM (maskfull) and HASH (maskless) filter regions.
Also update existing mac_addr_set() to use the new MPS table API.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add API to program and manage hardware Multi Port Switch table. MPS
holds destination MAC addresses to be matched against incoming packets
for further rule processing. Packets not matching any entry in MPS table
will be dropped by default, unless the underlying port is in promiscuous
mode.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add flow API operations to offload vlan push, pop, and rewrite actions.
For vlan push or rewrite actions, allocate and program an entry from
L2T table. Use the L2T index to program vlan actions for LETCAM
(maskfull) and HASH (maskless) filters.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add API to program and manage hardware Layer 2 Table. L2T holds
information necessary to rewrite specific fields in packet, such
as destination MAC address and vlan id.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
>From the Intel Ethernet Controller X710/XXV710/XL710 Specification
Update:
Starting from NVM 5.02, if the Set Local LLDP MIB command is
received while the DCBx specific agent is stopped, the command
returns an EPERM error. If the command is received while the
LLDP agent is stopped, it sets the local MIB without exchanging
LLDP with peer, and returns SUCCESS.
This results in the harmless, but annoying, diagnostic:
default dcb config fails. err = -53, aq_err = 1.
So, if possible (older firmwares cannot safely stop LLDP), stop the
LLDP daemon when we are in software mod before we attempt to call
i40e_set_dcb_config.
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds alarm handler, and then i40e
PF will use alarm handler instead of interrupt
handler when device is started and Rx interrupt
mode is disabled. This way will save CPU cycles
during receiving packets.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch checks negotiated features to see if necessary to offload
before set the tap device offload capabilities. It also checks if kernel
support the TUNSETOFFLOAD operation.
Fixes: 5e97e42025 ("net/virtio-user: enable offloading")
Cc: stable@dpdk.org
Signed-off-by: Eric Zhang <eric.zhang@windriver.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Rxq cq_ci was 16 bits while hardware is expecting to wrap
around 24 bits, this caused interrupt failure after burst of packets.
Fixes: 43e9d9794c ("net/mlx5: support upstream rdma-core")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
In case of a temporary failure the ixgbe driver can return the internal
error IXGBE_ERR_RESET_FAILED to the application. Instead, return
-EAGAIN as per the public API specification.
Fixes: cddaf87a1e ("lib: fix unused values")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When bond slave devices cannot transmit all packets in bufs array,
tx_burst callback shall merge the un-transmitted packets back to
bufs array. Recent merge logic introduced a bug which causes
invalid mbuf addresses being written to bufs array.
When caller frees the un-transmitted packets, due to invalid addresses,
application will crash.
The fix is avoid shifting mbufs, and directly write un-transmitted
packets back to bufs array.
Fixes: 09150784a7 ("net/bonding: burst mode hash calculation")
Cc: stable@dpdk.org
Signed-off-by: Jia Yu <jyu@vmware.com>
Acked-by: Chas Williams <chas3@att.com>
Some NFP firmwares support live changes to the MAC address, but
this is not always true and the firmware advertises it accordingly.
This patch checks if firmware does not support live changes and
sets RTE_ETH_DEV_NOLIVE_MAC_ADDR in that case.
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Mark internal variables static to avoid potential redefinition
errors later on.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Reviewed-by: Yelena Krivosheev <yelena@marvell.com>
Fix used_bpools array initialization by using range initializer.
This way all necessary variables are properly initialized regardless
of PP2_NUM_PKT_PROC value.
Fixes: 0ddc9b815b ("net/mrvl: add net PMD skeleton")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Add MVEP (Marvell Embedded Processors) to drivers/common which
will keep code reused by current and future MRVL PMDs.
Right now we have only common DMA memory initialization routines there.
Signed-off-by: Liron Himi <lironh@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Reviewed-by: Natalie Samsonov <nsamsono@marvell.com>
On the code after the below commits, the criteria to select the IPV4 or
IPV6 hash functions was the existence of some ETH_RSS_IPV4 RSS types on
the flow rule.
The check is wrong. For example ETH_RSS_NONFRAG_IPV4_TCP will not select
the IPV4 hash which will cause the packet to be spread in a bad way.
Fix it by adding the corresponding types needed for each hash selection.
Fixes: 592f05b29a ("net/mlx5: add RSS flow action")
Fixes: fd0b70316b ("net/mlx5: support inner RSS computation")
Cc: stable@dpdk.org
Reported-by: Yaroslav Brustinov <ybrustin@cisco.com>
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
On ConnectX-4 Lx the Multi Packet Send (MPW) feature is considered
un-secure, as on some cases were the application provides incorrect mbufs
on the Tx burst the host or NIC can get stuck.
Hence, disabling the feature by default for this specific NIC.
Users can still enable this feature and enjoy the performance gain
(mostly for low number of cores) by using the txq_mpw_en devarg.
This patch will impact the out of the box performance of some application
using ConnectX-4 Lx for the sack of security and robustness.
Since we need different defaults based on the underlying device the mpw
field in the configuration struct was extended to contain also the
MLX5_ARG_UNSET option.
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
LMTST does not guarantee packet content get synced with L2C when
HW access the packet for transmitting.
Adding coherent IO write barrier will make sure HW sees the correct
packet if its modified.
Fixes: 9e747589bd ("net/octeontx: add packet transmit burst function")
Cc: stable@dpdk.org
Reported-by: Vikas Aggarwal <vikas.aggarwal@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The event buffer was changed to be a fixed size value,
had a couple of issues. The big one is that rte_free was still
being called for a pointer that was not setup with rte_malloc().
The event buffer was also too small to handle heavy receive
traffic; and running the event buffer out would crash
the application.
Fix by going back to a dynamically resized event buffer.
And grow it by 25% to avoid lots of realloc's.
Fixes: 530af95a78 ("bus/vmbus: avoid signalling host on read")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Add tx_done_cleanup ethdev hook to allow application to
control if/when it wants completions to be handled.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Tune the vmbus connection so the host scans faster. This improves
transmit performance. The host default value is 100us but setting
to 50us reduces packet loss significantly.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Fix the error handling in setting up transmit buffer.
If setting up chimney buffer fails, then it is not connected so
no need to send disconnect.
Allow for some unused area if full area is not used.
Fixes: 4e9c73e96e ("net/netvsc: add Hyper-V network device")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
We assume VLAN ethtertype is 0x8100 in get_vlan_offset() function,
but it could be 0x88A8 if QinQ is supported.
Fixes: 06fe78b98c ("bond: add mode 6")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Chas Williams <chas3@att.com>
When a secondary process handles VDEV_SCAN_ONE mp action, it is possible
the device is already be inserted. This happens when we have multiple
secondary processes which cause multiple broadcasts from primary during
bus->scan. So we don't need to log any error for -EEXIST.
Bugzilla ID: 84
Fixes: cdb068f031 ("bus/vdev: scan by multi-process channel")
Cc: stable@dpdk.org
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Gage Eads <gage.eads@intel.com>
This patch removes the forward declaration of rte_pci_remove_device()
method. In the past, this forward decalaration was needed for
rte_pci_detach(), which is now removed from pci_common.c.
Fixes: e690338a7b ("bus/pci: remove unused function to detach by address")
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
The size of Rx queue is determined by dividing the number of descriptors by
the number of strides. As device can't support single slot queue, if the
number of descriptors is same as the number of strides, MPRQ shouldn't be
enabled. Otherwise, this will cause HW fault. For example, if rxd is set to
512 with testpmd on ConnectX-4 Lx, PMD can't receive more than 512 packets
because the minimum number of strides for ConnectX-4 Lx is 512. Users have
to configure larger number of descriptors in this case.
Fixes: 7d6bf6b866 ("net/mlx5: add Multi-Packet Rx support")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
PMD did not pass down the intended queue id while
configuring the ntuple filter.
Fixes: 622075356e ("net/qede: support ntuple and flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
The rte_flow meaning of zero flow mask configuration is to match all
the range of the item value.
For example, the flow eth / ipv4 dst spec 1.2.3.4 dst mask 0.0.0.0
should much all the ipv4 traffic from the rte_flow API perspective.
>From some kernel perspectives the above rule means to ignore all the
ipv4 traffic (e.g. Ubuntu 16.04, 4.15.10).
Due to the fact that the tap PMD should provide the rte_flow meaning,
it is necessary to ignore the spec in case the mask is zero when it
forwards such like flows to the kernel.
So, the above rule should be translated to eth / ipv4 to get the
correct meaning.
Ignore spec configurations when the mask is zero.
Fixes: de96fe68ae ("net/tap: add basic flow API patterns and actions")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The host will notify netvsc device about failed UDP and TCP
checksum. Propagate that information into the mbuf.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
The Netvsc PMD was not filling in the packet type information.
Fixes: 4e9c73e96e ("net/netvsc: add Hyper-V network device")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
This function is not used by netvsc driver yet.
Still the code should handle case where device driver returns
zero (due to rescind).
Coverity issue: 302871
Fixes: 831dba47bd ("bus/vmbus: add Hyper-V virtual bus support")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Use strlcpy rather than strncpy to avoid any issues about
null termination.
Coverity issue 302859
Fixes: 831dba47bd ("bus/vmbus: add Hyper-V virtual bus support")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Fix bug reported by Coverity where directory being scanned was
not closed in error path (leaking file descriptor).
Coverity issue: 302848
Fixes: 831dba47bd ("bus/vmbus: add Hyper-V virtual bus support")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
This patch fixes sgl filling to handle offset
greater than first sgl segment
Fixes: 1947bd1858 ("compress/qat: support scatter-gather buffers")
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Fixed lengths for src and dest buffers
Fixes: 32842f2a6d ("compress/qat: create FW request and process response")
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This commit fixes an offset check in decompression which was checking
destination offset size against dst data_len rather than checking
against dst pkt_len as required, to support single and multi-segment
buffers.
Fixes: 788e748d38 ("compress/isal: support chained mbufs")
Signed-off-by: Lee Daly <lee.daly@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
If MPRQ is enabled, a PMD-private mempool is allocated. For ConnectX-4 Lx,
the minimum number of strides is 512 which ConnectX-5 supports 8. This
results in quite small number of elements for the MPRQ mempool. For
example, if the size of Rx ring is configured as 512, only one MPRQ buffer
can cover the whole ring. If there's only one Rx queue is configured. In
the following code in mlx5_mprq_alloc_mp(), desc is 1 and obj_num will be
36 as a result.
desc *= 4;
obj_num = desc + MLX5_MPRQ_MP_CACHE_SZ * priv->rxqs_n;
However, rte_mempool_create_empty() has a sanity check to refuse large
per-lcore cache size compared to the number of elements. Cache flush
threshold should not exceed the number of elements of a mempool. For the
above example, the threshold is 32 * 1.5 = 48 which is larger than 36 and
it fails to create the mempool.
Fixes: 7d6bf6b866 ("net/mlx5: add Multi-Packet Rx support")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Multiple tunnel isn't allowed but MPLS over GRE should be accepted.
Fixes: a4a5cd21d2 ("net/mlx5: add flow MPLS item")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
mlx5_dev_ops_isolate doesn't have APIs for enabling/disabling allmulti
mode as it can't be enabled in flow isolation mode. If the function
pointers are null, librte APIs such as
rte_eth_allmulticast_enable/disable() fail to set the flag
(dev->data->all_multicast). The flag is used when starting traffic by
mlx5_traffic_enable(). When switching out of flow isolation mode, allmulti
mode will not be set even though it has been enabled.
Fixes: 0887aa7f27 ("net/mlx5: add new operations for isolated mode")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
mlx5_dev_ops_isolate doesn't have APIs for enabling/disabling promiscuous
mode as it can't be enabled in flow isolation mode. If the function
pointers are null, librte APIs such as rte_eth_promiscuous_enable/disable()
fail to set the flag (dev->data->promiscuous). The flag is used when
starting traffic by mlx5_traffic_enable(). When switching out of flow
isolation mode, promiscuous mode will not be set even though it has been
enabled.
Fixes: 0887aa7f27 ("net/mlx5: add new operations for isolated mode")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Don't signal host that receive ring has been read until all events
have been processed. This reduces the number of guest exits and
therefore improves performance.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
If the number of packets requested are already present in the
rx_ring then skip reading the ring buffer from the host.
If the ring between the poll and receive side is full, then don't
poll (let incoming packets stay on host).
If no more transmit descriptors are available, then still try and
flush any outstanding data.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Increase the size of the ring used to hold mbuf's received
but not processed. The default is now based off the size
of the receive mbuf pool not the number of sections from the host.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
The internal receive ring should be freed with rte_ring_free
not rte_free.
Fixes: 4e9c73e96e ("net/netvsc: add Hyper-V network device")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Moved the link status validity check from the slave add to the slave
activation step. Otherwise slave add will fail for mode 4 if
the ports are all stopped but only one of them checked.
Removed activate slave call from slave add function.
Bugzilla ID: 52
Fixes: b77d21cc23 ("ethdev: add link status get/set helper functions")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Race condition can appear in the bond_mode_8023ad_periodic_cb()
callback when bonding port is stopped, reconfigured and restarted.
Re-ordered calls in bond_ethdev_start() to have callback alarm set
after slave ports are reconfigured.
Fixes: 2efb58cbab ("bond: new link bonding library")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Chas Williams <chas3@att.com>
There are several tx/rx offload capabilities missing in AVF.
Add them in this patch since AVF supports them.
Fixes: 69dd4c3d08 ("net/avf: enable queue and device")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This reverts commit 7546dc4a13.
In i40e FDIR PMD code for checking programming status,
when the action of add FDIR filter is ok, i40e NIC will
not write back to programming status descriptor, so if
PMD code check DD is not done after period of time dealy,
it means the add or remove filter action is ok. It only write
back descriptor when fail. So, there is no issue for the original
code.
Fixes: 7546dc4a13 ("net/i40e: fix check of flow director programming status")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This commit fixes an infinite loop bug that could occur
if the i40e AVX2 driver is used, and high traffic rates
cause the mempool from which the rxq pulls mbufs to become
empty.
The result would be an infinite loop of checking if we
should perform an rx rearm, calling the function and an
error return due the the mempool being emtpy.
The fix is to align the code in the AVX2 driver with the
SSE driver, where an if() is used instead of a while(),
allowing the thread to return from i40e rx function even
if the mempool is empty.
Fixes: dafadd7376 ("net/i40e: add AVX2 Rx function")
Cc: stable@dpdk.org
Reported-by: David Coyle <david.coyle@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Brendan Ryan <brendan.ryan@intel.com>
Tested-by: David Coyle <david.coyle@intel.com>
There's parsing error when using device argument
support-multi-driver or queue-num-per-vf or both.
Error log is "PMD: Error parsing device, invalid
key <support-multi-driver>" and "PMD: Error parsing
device, invalid key <queue-num-per-vf>". The root
cause is that device argument will be parsed in
different parsing functions with local valid key .
This patch fixes the issue by combine all supported
arguments's valid keys.
Fixes: cfdfca493c ("net/i40e: fix multiple driver support")
Fixes: ee653bd800 ("net/i40e: determine number of queues per VF at run time")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
TC message for VLAN POP is broken due to an unfinished nested attribute.
Fixes: 7ac6778d50 ("net/mlx5: add VLAN item and actions to switch flow rules")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
VLAN ID is not properly translated to TC due to swapped byte order.
Fixes: 7ac6778d50 ("net/mlx5: add VLAN item and actions to switch flow rules")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This commit fixes a segmentation fault observed when configuring
mlx5 with RSS flow rule containing invalid queues indices such as
negative numbers, queue numbers bigger than the number Rx queues the
PMD or has no queues at all.
Fixes: 592f05b29a ("net/mlx5: add RSS flow action")
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
When running testpmd with an mlx5 device and then executing at testpmd
prompt in a raw: "port start all" followed by "port stop all"
a new file named /var/tmp/net_mlx5_<socket num> is created as a result
of creating a new unix domain socket (used for communication between
the primary and secondary processes).
When the new unix socket file is created the old unix socket file should
have been removed. This commit fixes it by closing the old unix socket
just before creating the new one in function mlx5_socket_init()
Fixes: f8b9a3bad4 ("net/mlx5: install a socket to exchange a file descriptor")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
The below commit has added a graph based expansion logic for RSS rule to
satisfy Verbs requirements. With this logic, for example, the rule:
flow create 0 ingress pattern eth / end actions rss queues 0 1 end types
ipv4-tcp ipv6-tcp end / end
will be expanded into the rules:
flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss queues 0 1
end types ipv4-tcp ipv6-tcp end / end
flow create 0 ingress pattern eth / ipv6 / tcp / end actions rss queues 0 1
end types ipv4-tcp ipv6-tcp end / end
flow create 0 ingress pattern eth / end actions queue index 0 / end
The below commit defined two graphs:
1. graph for the tunnel case which starts from the ETH item
2. graph for the non-tunnel case which starts from the ETH item
The graphs are ignoring the VLAN case. Hence rules with VLAN item will
fail to traverse the graph and it will result in flow rule creation error.
Adding the VLAN item to the existing graphs will not work as the flow
engine will reject any VLAN item without a specific vid.
To solve this case two new graphs were added (for the tunnel and
non-tunnel case) which contain the VLAN item and are being used only
when the VLAN item exists in the flow pattern.
Two cases left un-covered for the inner RSS:
1. The case were VLAN exists in the pattern as part of the inner headers
2. The case were VLAN exists in the pattern both in the outer and the
inner headers
Solving those cases will require to add two more graphs.
Holding a VLAN for the overlay network is not common, the subnets are
usually defined by the tunnel protocol, for example the VXLAN vni.
Hence adding those two graphs seems like an overkill at this point.
Based on needs one can add those to provide the full support.
Fixes: 592f05b29a ("net/mlx5: add RSS flow action")
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
There are dedicated QP attributes, tunnel offload flag and mask, which
must be configured in order to allow part of the HW tunnel offloads.
So, if a QP is pointed by a tunnel flow, the above QP attributes
should be configured.
The mask configuration is wrongly only performed if an internal RSS was
configured by the user, while there is no reason to condition the
tunnel offloads in RSS configurations.
Consequently, some of the tunnel offloads was not performed by the HW
when a tunnel flow was configured, for example, the packet tunnel
types was not reported to the user.
Replace the internal RSS condition with the tunnel flow condition.
Fixes: df6afd377a ("net/mlx5: remove useless arguments in hrxq API")
Signed-off-by: Matan Azrad <matan@mellanox.com>
Stripping binaries at build time is usually a bad thing since it makes
impossible to generate (split) debug symbols and this can lead to a more
difficult debugging.
Fixes: 59b91bec12 ("net/mlx5: spawn rdma-core dependency plug-in")
Cc: stable@dpdk.org
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Stripping binaries at build time is usually a bad thing since it makes
impossible to generate (split) debug symbols and this can lead to a more
difficult debugging.
Fixes: 27cea11686 ("net/mlx4: spawn rdma-core dependency plug-in")
Cc: stable@dpdk.org
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
According to commit fb8fd96d42 ("ethdev: add shared counter to flow
API") the counter id should be taken into account only when the shared
flag is set.
Fixes: 60bd8c9747 ("net/mlx5: add count flow action")
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
This patch verifies that the number of Rx queues configured for RSS
is supported by the device hardware.
RSS support in mlx4 requires contiguous chunk of QPs to be reserved,
there is a hardware limitation on the amount of contiguous QPs which
is reported by the hardware. Ignoring this value will cause Rx queues
creation to fail.
Cc: stable@dpdk.org
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Currently only one buffer pool is configured and in use,
looping for up to maxmum 8 times is unnecessary and might
be buggy as assigned uninititalized values.
The fix is to loop for the configured times with initialize
with valid values.
Fixes: 16bbc98a3e ("bus/fslmc: update MC to 10.3.x")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
We were using LICENSE.bnx2x_pmd to reference inclusion of SPDX licensing
tag from all the source file. Remove the LICENSE.bnx2x_pmd file and
directly include SPDX tags in source files.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Originally the PMD had "QLogic Corporation" copyright. When we submitted
commit e3de5dad2a ("net/bnx2x: change copyright info to Cavium"),
the "Qlogic Corporation" copyright was accidentally replaced
with "Cavium Inc". So now we see multiple Cavium copyright messages.
We're changing it to "Broadcom Corporation" copyright.
Fixes: e3de5dad2a ("net/bnx2x: change copyright info to Cavium")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
The PMD has been modified to invoke the polling function in the link
management code which detects the peer speed/mode, configure the link
and update the status accordingly. This patch is the fix for the link
down issue seen when we do dev_stop() and dev_start() from an
application.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
This patch fixes firmware command timeout error seen during device stop
while stopping queues. It patially reverts an earlier preventive change
commit 91b7e432bc ("net/bnx2x: disable fast path interrupts") to now
enable fast path interrupts.
The original issue of performance degradation is not observed anymore,
with or without the fix.
Fixes: 91b7e432bc ("net/bnx2x: disable fast path interrupts")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Treat any attention which is not for timeout event as invalid
and return status accordingly. The HW error handler logs and clears
the HW attention. Without this fix we can see flood of GRC attentions.
Fixes: e6051bd6b0 ("qede: add interrupt handling support")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
VDMs may cause the was_error indication to be set after the driver
clears it. Clear the indication after the internal FID_enable for
the PF is set.
Fixes: 60c78a5e25 ("net/qede/base: fix recovery from previous ungraceful exit")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
The reta_size being indicated in the bnxt_dev_info_get_op was incorrect.
Set it to the value supported by the hardware.
Fixes: 0a6d2a7200 ("net/bnxt: get device infos")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Tested-by: Randy Schacher <stuart.schacher@broadcom.com>
Firmware can restrict access to certain resources in the hardware
depending on various factors. In such cases when the PMD tries to
configure these resources the firmware will return
HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED error. Parse this and return
the standard EACCES error to the applications.
Fixes: 804e746c7b ("net/bnxt: add hardware resource manager init code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In bnxt_hwrm_flash_nvram, before attempting to allocate a buffer
we are grabbing the rte_spinlock. And if the allocation fails we
are returning before releasing the spinlock. We avoid the situation
by calling HWRM_PREP which grabs the lock after the buffer is
allocated successfully.
Fixes: 19e6af01bb ("net/bnxt: support get/set EEPROM")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
In some cases we may not be freeing up memory allocated for certain
NVM commands because the code might have bailed out before reaching
rte_free(). This patch moves some code around to ensure the allocated
memory is freed before exiting the function.
Fixes: 19e6af01bb ("net/bnxt: support get/set EEPROM")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Michael Wildt <michael.wildt@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
bnxt_clear_hwrm_vnic_filters() was removing the created filter from HW,
but not clearing the internal data structures by removing it from the
struct bnxt_vnic_info->filter list.
Fixes: 5ef3b79fdf ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Control queues can not be allocated for VFs. So, add check to
only allocate control queues for PFs. This fixes adapter crash
when an attempt is made to allocate control queues for VFs.
Fixes: 3a3aaabc ("net/cxgbe: add control queue to communicate filter requests")
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
The NIC persists the vxlan port number across vNIC init/de-init
(e.g. restart testpmd). So, explicitly reset the setting to the
default value (4789) as part of the initialization.
Fixes: 8a4efd1741 ("net/enic: add handlers to add/delete vxlan port number")
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
This reverts the patch that enabled mbuf fast free.
There are two main reasons.
First, enic_fast_free_wq_bufs is broken. When
DEV_TX_OFFLOAD_MBUF_FAST_FREE is enabled, the driver calls this
function to free transmitted mbufs. This function currently does not
reset next and nb_segs. This is simply wrong as the fast-free flag
does not imply anything about next and nb_segs.
We could fix enic_fast_free_wq_bufs by making it to call
rte_pktmbuf_prefree_seg to reset the required fields. But, it negates
most of cycle saving.
Second, there are customer applications that blindly enable all Tx
offloads supported by the device. Some of these applications do not
satisfy the requirements of mbuf fast free (i.e. a single pool per
queue and refcnt = 1), and end up crashing or behaving badly.
Fixes: bcaa54c1a1 ("net/enic: support mbuf fast free offload")
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
On dev_stop the Rx/Tx_burst functions are being set to NULL, this causes
a SEGFAULT in cases where control path calls stop and a paket is still
being processed by a worker.
Instead clear the fastpath functions in dev_close.
Fixes: da6c687471 ("net/octeontx: add start and stop support")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add the missing param "server" to param string.
Also add the missing spaces after params.
Fixes: bd8f50a45d ("net/virtio-user: support server mode")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This macro isn't used any more after below commit:
Fixes: a4996bd89c ("ethdev: new Rx/Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
