This patch update the logic and expose the soc value
register, so that it can be used by other modules as well.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
fix the soc id path and missing fclose
Fixes: cf0fab1d2c ("net/dpaa: support firmware version get API")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Populate the mbuf field packet_type which is required
for calculating checksum while transmitting frames
Fixes: 8cffdcbe85 ("net/dpaa: support scattered Rx")
Cc: stable@dpdk.org
Signed-off-by: Ashish Jain <ashish.jain@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The number of Tx descriptors is not used as HW Tx ring size any more.
It simply defines maximum fill level.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
The number of Rx descriptors is not used as HW Rx ring size any more.
It simply defines maximum fill level.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Prepare to support more options for number of Tx descriptors.
libefx-based datapath is updated just for completeness to
make code more readable and less error-prone.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Prepare to support more options for number of Rx descriptors.
libefx-based datapath is updated just for completeness to
make code more readable and less error-prone.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
EFX_TXQ_LIMIT is libefx-specifics and it should not be used
for other Tx datapaths implementations (e.g. EF10 native).
EF10 native Tx datapath has its own understanding of the maximum
TxQ fill level imposed by EvQ clear strategy and space reserved
for Tx error and flush events.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
EFX_RXQ_LIMIT is libefx-specifics and it should not be used
for other Rx datapaths implementations (e.g. EF10 native).
EF10 native Rx datapath has its own understanding of the maximum
RxQ fill level imposed by EvQ clear strategy and space reserved
for Rx error and flush events.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Ethdev Rx offloads API has changed since:
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
This commit support the new Rx offloads API.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
This commit support the new Tx offloads API.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Counter_set is a counter used for flows when its support is available.
Renaming it to flow counter.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Move device configuration and features capabilities to its own structure.
This structure is filled by mlx5_pci_probe(), outside of this function
it should be treated as *read only*.
This configuration struct will be used for the Tx/Rx queue setup to
select the Tx/Rx queue parameters based on the user configuration and
device capabilities.
In addition it will be used by the burst selection function to decide
on the best pkt burst to be used.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Change the function prototype to return the function pointer of the
selected Tx/Rx burst function instead of assigning it directly to the
device context.
Such change will enable to use those select functions to query the burst
function that will be selected according to the device configuration.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Bit-fields in mlx5_rxq_data can be changed on the fly by a control plane -
e.g. rxq->mark. However, vectorized Rx uses a bit-field to mark pending
errors. Even if one bit is written, consequence is to write the whole
integer and this can cause a synchronization issue - two entities write to
a same block without locking. As the pending_err bit is entirely internal
use for the datapath, this can be replaced with a local variable.
Fixes: 6cb559d67b ("net/mlx5: add vectorized Rx/Tx burst for x86")
Fixes: 570acdb1da ("net/mlx5: add vectorized Rx/Tx burst for ARM")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Max number of Tx scatter-gather entries is a property of the device
and is queried at init. This value was not changed in a while and
most probably will not be changed in the future, Therefore and
in order to enhance Tx performance, the Tx max-sge value is hardcoded
in mlx4 PRM code.
This patch adds a verification that the above assumption still holds
and that the hardcoded value is still supported by the mlx4 hardware.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add description of raw flow type mode for flow_director_filter
command in testpmd. Modify description of flow type parameter
for functions set_hash_global_config, set_hash_input_set and
set_fdir_input_set.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add possibility to load file with raw packet and set it as a
template for FDIR setup.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When primary address mac is changed, the mac filters were not updated in
the VSI with the new mac addr and incoming packets with this destination
address are dropped by the hardware filters.
This patch removes the VSI mac filter for the previous mac address and
adds a new one for new mac address.
Fixes: e18e01e92c ("i40e: support default MAC address setting")
Cc: stable@dpdk.org
Signed-off-by: Laurent Hardy <laurent.hardy@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add a new Rx function using AVX2 instructions for higher
performance. For now, this functionality is limited to platforms
with Intel Xeon Scalable Processor(SP). The function to be used
is selected at runtime, not just at compile-time.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add a new Tx function using AVX2 instructions for higher
performance. For now, this functionality is limited to platforms
with Intel Xeon Scalable Processor(SP). The function to be used
is selected at runtime, not just at compile-time.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch mainly adds/removes comments for function parameters
that were missing or no longer needed.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch clears software resource bits in synchronization
register and updates host interface resource bit error case for
X540. It also fixes compile warnings of using GCC 7.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
With this patch, it uses 2 bytes of buffer reading, as required
for flash read command. It also adds definitions for LESM module.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds lockless read/write support for clause 22 PHY,
together with some enhancements for link speed and return value
handling.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Increase SECRX_RDY polling frequency and semaphore timeout which
fixes the FWSW.PT check in ixgbe_mng_present().
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add common functions for getting OEM product version, option
ROM version, and ETrack id.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Rename virtchnl_vf_resource's vf_offload_flags to vf_cap_flags.
The new name is more generic, so more than just offloading
capabilities can be added.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
