Turbo_sw PMD driver now building with meson/ninja
with or without SDK libraries.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Adding compile flag to allow to build the turbo_sw PMD
without dependency to have the SDK libraries installed.
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add dump_grp_pkt() function.
Dump invalid mbuf data in case of error in group tests 12 and 13.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add extra test configuration for BURST_SIZE packets
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Error log messages after the create_sa() function calls
were using the wrong function name.
The function name is replaced with create_sa.
Fixes: 05fe65eb66 ("test/ipsec: introduce functional test")
Cc: stable@dpdk.org
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When esn is used then high-order 32 bits are included in ICV
calculation however are not transmitted. Update packet length
to be consistent with auth data offset and length before crypto
operation. High-order 32 bits of esn will be removed from packet
length in crypto post processing.
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add support for packets that consist of multiple segments.
Take into account that trailer bytes (padding, ESP tail, ICV)
can spawn across multiple segments.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Added NULL algo tests into loop test mechanism used
by block cipher tests as easier to extend there.
Included chain, cipher-only and auth-only use-cases.
Extended to cover out-of-place use-cases and use-cases
where data length is not an 8-byte multiple.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add new unittest-like mechanism which uses scapy to craft custom
packets and a set of assertions to check how ipsec-secgw example
application is processing them. Python3 with scapy module is
required by pkttest.sh to run test scripts.
A new mechanism is used to test IPv6 transport mode traffic with
header extensions (trs_ipv6opts.py).
Fix incomplete test log problem by disabling buffering of ipsec-secgw
standard output with stdbuf application.
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Using transport with IPv6 and header extensions requires calculating
total header length including extensions up to ESP header which is
achieved with iteratively parsing extensions when preparing traffic
for processing. Calculated l3_len is later used to determine SPI
field offset for an inbound traffic and to reconstruct L3 header by
librte_ipsec.
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reconstructing IPv6 header after encryption or decryption requires
updating 'next header' value in the preceding protocol header, which
is determined by parsing IPv6 header and iteratively looking for
next IPv6 header extension.
It is required that 'l3_len' in the mbuf metadata contains a total
length of the IPv6 header with header extensions up to ESP header.
Fixes: 4d7ea3e145 ("ipsec: implement SA data-path API")
Cc: stable@dpdk.org
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Introduce new function for IPv6 header extension parsing able to
determine extension length and next protocol number.
This function is helpful when implementing IPv6 header traversing.
Signed-off-by: Marcin Smoczynski <marcinx.smoczynski@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch fixes the out-of-bounds coverity issue by adding
missed algorithms to the array.
Coverity issue: 337683
Fixes: c68d7aa354 ("crypto/aesni_mb: use architecture independent macros")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Adding a new field, ff_disable, to allow applications to control the
features enabled on the crypto device. This would allow for efficient
usage of HW/SW offloads.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Reorg within Intel teams causing transfer of maintainership
Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch adds an option to support both IV (of all supported sizes)
and J0 when using Galois Counter Mode of crypto operation.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Added info about socket id used by compression perf
test process and by the driver
Signed-off-by: Tomasz Cel <tomaszx.cel@intel.com>
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Artur Trybula <arturx.trybula@intel.com>
Fixed some typos and clarified how errors on ops which
fail to get submitted on the enqueue API should be handled.
Fixes: a584d3bea9 ("doc: add compressdev library guide")
Cc: stable@dpdk.org
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Shally Verma <shallyv@marvell.com>
ANSI C memcmp is not constant time function per spec so it should
be avoided in cryptography usage.
Fixes: d61f70b4c9 ("crypto/libcrypto: add driver for OpenSSL library")
Cc: stable@dpdk.org
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
The format for printing float is incorrect for the following fields
in pmd-cyclecount test: Cycles/Op,Cycles/Enq,Cycles/Deq.
Currently, the format is %.f3. This format will round off the number to
the nearest integer and append a 3 after that.
This patch changes the format to %.3f. This will print the number as a
floating point with a precision of 3 fractional digits.
Fixes: 96dfeb609b ("app/crypto-perf: add new PMD benchmarking mode")
Cc: stable@dpdk.org
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
A bad formula was copied and pasted.
Fixes: 4935e1e9f7 ("bbdev: introduce wireless base band device lib")
Fixes: 0318c02b57 ("doc: add cryptodev chapter in prog guide")
Fixes: a9bb0c44c7 ("doc: add rawdev library guide and doxygen page")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
test_data->input_data_sz is passed to a parameter that
cannot be negative.
Coverity issue: 328504
Fixes: b68a82425d ("app/compress-perf: add performance measurement")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
The release function was using qp->stream after already
releasing it and the null pointer checking was missing.
Also since rte_free(NULL) is a no-op, remove unnecessary
checks for NULL.
Coverity issure: 340860
Fixes: dc49e6aa48 ("compress/isal: add ISA-L compression functionality")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Lee Daly <lee.daly@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
- Include list of supported adapters.
- Include list of supported features.
- Document requirements for vector mode PMD.
- Remove obsolete limitation (scatter rx has been supported for
some time).
- Fixed broken links.
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
When adding offloads from commandline, not only port
related configuration bits should be set, but also queue
related offloads configuration bits, or it will cause error.
For example, test in this process for ixgbe:
(1)./x86_64-native-linuxapp-gcc/app/testpmd -c 0x6 -n 4
-- -i --portmask=0x1 --port-topology=loop --disable-crc-strip
(2)port stop all
(3)port config all crc-strip on
(4)port start all
we will see "Fail to configure port 0 rx queues" of warning info.
Fixes: 0074d02fca ("app/testpmd: convert to new Rx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
rte_calloc functions returns a non-null pointer in case of
success and null pointer in case of failure.
The return value should be checked and the function flow
should take that into consideration.
This patch adds a check for rte_calloc return value in function
flow_list_create.
Fixes: 84c406e745 ("net/mlx5: add flow translate function")
Cc: stable@dpdk.org
Signed-off-by: Asaf Penso <asafp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
mlx5_link_update uses the newer ethtool command
ETHTOOL_GLINKSETTINGS to determine interface capabilities but falls
back to the older (deprecated) ETHTOOL_GSET command if the new
method fails for any reason.
The older method only supports reporting of capabilities up to 40G.
However, mlx5_link_update_unlocked_gs can return a failure for a
number of reasons (including the link being down).
Using the older method in cases of transient failure of the method
can result in reporting of reduced capabilities to the application.
The older method (mlx5_link_update_unlocked_gset) should only be
invoked if the newer method returns EOPNOTSUPP.
Fixes: 7d2e32f76c ("net/mlx5: fix ethtool link setting call order")
Cc: stable@dpdk.org
Reported-by: Srinivas Narayan <srinivas.narayan@att.com>
Signed-off-by: Asaf Penso <asafp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This commit removes the support of configuring the device E-switch
using TCF since it is now possible to configure it via DR (direct
verbs rules), and by that to also remove the PMD dependency in libmnl.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
mlx5 implements mlx5_flow_null_drv_ops to be used when a specific
flow typei/driver is not available or invalid.
This routines return error without modifying the rte_flow_error
parameter passed to them which causes testpmd, for example, to crash.
This commit addresses the issue by modifying the rte_flow_error
parameter in theses routines.
Fixes: 0c76d1c9a1 ("net/mlx5: add abstraction for multiple flow drivers")
Fixes: 684dafe795 ("net/mlx5: add flow query abstraction interface")
Cc: stable@dpdk.org
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Add support for setting the link up and down.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
This patch implements rx interrupts feature required for power
saving. These interrupts can be enabled/disabled on demand.
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add MTU set operation and MTU update feature.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add device start operation and update the correct
function pointers for Rx and Tx burst functions.
This patch also update the octeontx2 NIC specific documentation.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
