Refer the section which explains driver compilation and running of
testpmd in Linux, instead of describing it in driver documentation.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Refer the section which explains driver compilation and running of
testpmd in Linux, instead of describing it in driver documentation.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Refer the section which explains driver compilation and running of
testpmd in Linux, instead of describing it in driver documentation.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Refer the section which explains driver compilation and running of
testpmd in Linux, instead of describing it in driver documentation.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Refer the section which explains driver compilation and running of
testpmd in Linux, instead of describing it in driver documentation.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Refer the section which explains driver compilation and running of
testpmd in Linux, instead of describing it in driver documentation.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Refer the section which explains driver compilation and running of
testpmd in Linux, instead of describing it in driver documentation.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Refer the section which explains driver compilation and running of
testpmd in Linux, instead of describing it in driver documentation.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Refer the section which explains driver compilation and running of
testpmd in Linux, instead of describing it in driver documentation.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Add a section in NIC drivers documentation to explain compiling and
testing of a PMD. It also mentions about host setup, which is required
before running testpmd.
Add label "testpmd_ug" to refer user guide.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch adds the NXP dpaa2 architecture and pmd details
in the Network interfaces section.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Having packets received without any offload flags given in the mbuf is not
very useful, and performance tests with testpmd indicates little
benefit is got with the current code by turning off the flags. This makes
the build-time option pointless, so we can remove it.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Having packets received without any offload flags given in the mbuf is not
very useful, and performance tests with testpmd indicates little to no
benefit is got with the current code by turning off the flags. This makes
the build-time option pointless, so we can remove it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
Enable Arkville on supported configurations
Add overview documentation
Minimum driver support for valid compile
Arkville PMD is not supported on ARM or PowerPC at this time
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Signed-off-by: John Miller <john.miller@atomicrules.com>
Seen with recent version of sphinx:
WARNING: latex_preamble conflicts with latex_elements['preamble'], ignored.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since VF can not disable/enable HW CRC strip for non-DPDK PF drivers,
and kernel driver almost default enable that feature, if disable it in
app's rxmode, VF driver will report the VF launch failure. So this
patch default to enable HW CRC strip to let VF launch successful.
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
NICs are available from Netcope under the names NFB-*.
Change names and direct the links to Netcope web.
Signed-off-by: Matej Vido <vido@cesnet.cz>
Acked-by: John McNamara <john.mcnamara@intel.com>
The first line of the MAINTAINERS file are:
"
The intention of this file is to provide a set of names that we can rely on
for helping in patch reviews and questions.
"
Unfortunately, some maintainers do not endorse their role for questions
asked on the mailing list.
Hope making it clear in the contribution guide will enforce more
responsive maintainer participation.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
VFd (the VF daemon) is a mechanism which can be used to configure
features on a VF without direct access to the PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
TILE-GX is no longer supported but the tap driver includes it in its
NIC overview ini file which causes a doc warning:
$ make doc-guides-html
sphinx processing guides-html...
Warning generate_nic_overview_table():
Unknown feature 'TILE-Gx' in 'tap.ini'
Fixes: 04b2c3c94346 ("doc: add tap features")
Signed-off-by: John McNamara <john.mcnamara@intel.com>
This patch deprecates the following functions in 17.05,
which will be removed in 17.08.
- rte_crpytodev_scheduler_mode_get()
- rte_crpytodev_scheduler_mode_set()
These two new functions replace them, fixing the typo in their names.
- rte_cryptodev_scheduler_mode_get()
- rte_cryptodev_scheduler_mode_set()
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Restructure QAT PMD instructions and add a device table to
minimise duplication for each device and make it easier to add devices.
Fix some device name typos and poor formatting.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
DOCSIS BPI mode is handled in the QAT PMD by sending full blocks to the
hardware device for encryption and using OpenSSL libcrypto for pre- or
post-processing of any partial blocks.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Adds support in OpenSSL PMD for algorithm following the DOCSIS
specification, which combines DES-CBC for full DES blocks (8 bytes)
and DES-CFB for last runt block (less than 8 bytes).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Tested-by: Yang Gang <gangx.yang@intel.com>
Underlying IPSec Multi buffer library implements
DOCSIS specification, so this commit adds support
for this new feature, which combines AES-CBC for full
AES blocks (16 bytes) and AES-CFB for last runt block
(less than 16 bytes).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
IPSec Multi-buffer library v0.45 has been released,
which includes, among other features, support for DOCSIS BPI
specification and include AVX512 optimizations.
This new version added const qualifiers to some of the function
prototypes, so the PMD has been updated to include these changes.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Fail-over mode works with 2 slaves, primary slave and secondary slave.
In this mode, the scheduler will enqueue the incoming crypto op burst
to the primary slave. When one or more crypto ops are failed to be
enqueued, they then will be enqueued to the secondary slave.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Packet-size based distribution mode is a scheduling mode works with 2
slaves, primary slave and secondary slave, and distribute the enqueued
crypto ops to them based on their data lengths. A crypto op will be
distributed to the primary slave if its data length equals or bigger
than the designated threshold, otherwise it will be handled by the
secondary slave.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
So far, the crypto performance application was only able to
test one buffer size and one burst size.
With this commit, multiple sizes can be passed, either as a range
of values or as a list of values.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
In order to simplify throughput and latency tests,
verify option has been removed from these and moved
as a separate test.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
HW based crypto drivers may only support limited number of
sessions per queue pair. This requires support for attaching
sessions to specific queue pair. New APIs are introduced to
attach/detach a session with/from a particular queue pair.
These are optional APIs.
Application can call attach API after creating a session
and can call detach API before deleting a session.
Application needs to check if max_nb_sessions_per_qp > 0,
then it should call the attach API.
max_nb_sessions_per_qp = 0 means infinite sessions per qp
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Remove DPDK QAT sample app, in favour of the newer applications
that use the cryptodev library: ipsec-gw and l2fwd-crypto,
which has support for Intel QuickAssist devices.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch changes the device configuration API for rte_cryptodev_ops
function prototype, and update all cryptodev PMDs for this change.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Follow the approach in the network devices overview,
for the feature matrix, so it improves readibility
and maintainability.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
When somebody use bad --optype with aead algorithms
segmentation fault could happen.
Fixes: f8be1786b1b8 ("app/crypto-perf: introduce performance test application")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
