Remove "__rte_unused" instances that are wrongly marked.
Fixes: 6dc83230b4 ("net/bnxt: support port representor data path")
Fixes: 1bf01f5135 ("net/bnxt: prevent device access when device is in reset")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Decouple user mark from user flag. Usage of mark does not require to
use flag as well. Flag is not actually supported yet.
Fixes: 1aacc3d388 ("net/sfc: support user mark and flag Rx for EF100")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
When starting VF, VF will issue reset command to PF, wait a fixed
amount of time, and assume VF reset is done on PF side. However,
compared with kernel PF, DPDK PF needs more time to setup. If we
run DPDK PF to support DPDK VF, the original delay will not be
enough.
When we first start VF after PF is launched, the execution
time of the statement info.msg_buf = rte_zmalloc("msg_buffer",
info.buf_len, 0); in the function i40e_dev_handle_aq_msg is more
than 200ms. It may cause VF start error.
Since iavf can hardly trigger this issue and i40evf will be replaced
by iavf in future DPDK versions, this patch provide a workaround.
We extend VF reset waiting time from 200ms to 500ms so that
VF can start normally when using DPDK PF and DPDK VF in most cases.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When start port, all MAC addresses will be set. We should set the MAC
type of default MAC address as VIRTCHNL_ETHER_ADDR_PRIMARY.
Fixes: 3f604ddf33 ("net/i40e: fix lack of MAC type when set MAC address")
Cc: stable@dpdk.org
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When start port, all MAC addresses will be set. We should set the MAC
type of default MAC address as VIRTCHNL_ETHER_ADDR_PRIMARY.
Fixes: b335e72034 ("net/iavf: fix lack of MAC type when set MAC address")
Cc: stable@dpdk.org
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The device name format used in ifpga_rawdev_create() was changed to
"IFPGA:%02x:%02x.%x", but the format used in ifpga_rawdev_destroy()
was left as "IFPGA:%x:%02x.%x", it should be changed synchronously.
To prevent further similar errors, macro "IFPGA_RAWDEV_NAME_FMT" is
defined to replace this format string.
Fixes: 9c006c45d0 ("raw/ifpga: scan PCIe BDF device tree")
Cc: stable@dpdk.org
Signed-off-by: Wei Huang <wei.huang@intel.com>
Acked-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
A performance drop is caused by that the RX scalar path
is selected when AVX512 is disabled and some HW offload
is enabled.
Actually, the HW offload is supported by AVX2 and SSE.
In this scenario AVX2 path should be chosen.
This patch removes the offload related check for SSE and AVX2
as SSE and AVX2 do support the offload features.
No implementation change about the data path.
Fixes: eff56a7b9f ("net/iavf: add offload path for Rx AVX512")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The driver support 2 mechanisms in order to support AGE action:
1. Aging by counter - HW counter will be configured to the flow traffic,
the driver polls the counter values efficiently to detect flow timeout.
2. Aging by ASO flow hit bit - HW ASO flow-hit bit is allocated for the
flow, the driver polls the bit efficiently to detect flow timeout.
ASO bit is only single bit resource while counter is 16 bytes, hence, it
is better to use ASO instead of counter for aging.
When a non-shared COUNT action is also configured to the flow, the
driver can use the same counter also for AGE action and no need to
create more ASO action for it.
The current code always uses ASO when it is supported in the device,
change it to reuse the non-shared counter if it exists in the flow.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
A FLOW_AGE event should be invoked when a new aged-out flow is detected
by the PMD after the last user get-aged query calling.
The PMD manages 2 flags for this information and check them in order to
decide if an event should be invoked:
MLX5_AGE_EVENT_NEW - a new aged-out flow was detected. after the last
check.
MLX5_AGE_TRIGGER - get-aged query was called after the last aged-out
flow.
The 2 flags were unset after the event invoking.
When the user calls get-aged query from the event callback, the TRIGGER
flag was set inside the user callback and unset directly after the
callback what may stop the event invoking forever.
Unset the TRIGGER flag before the event invoking in order to allow set
it by the user callback.
Fixes: f935ed4b64 ("net/mlx5: support flow hit action for aging")
Cc: stable@dpdk.org
Reported-by: David Bouyeure <david.bouyeure@fraudbuster.mobi>
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Counter action query was implemented as part of flow query, but was not
implemented as part of indirect action query.
This patch adds the required implementation.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
The port_action_handle_query function supports query operation for
indirect RSS action.
No driver currently supports this operation, and this support is
unnecessary.
Remove it.
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Existing API supports counter action to count traffic of a single flow.
The user can share the count action among different flows using the
shared flag and the same counter ID in the count action configuration.
Recent patch [1] introduced the indirect action API.
Using this API, an action can be created as indirect, unattached to any
flow rule.
Multiple flows can then be created using the same indirect action.
The new API also supports query operation of an indirect action.
The new API is more efficient because the driver gets it's own handler
for the count action instead of managing a mapping between the user ID
to the driver handle.
Support create, query and destroy indirect action operations for flow
count action.
Application will use the indirect action query operation to query this
count action.
In the meantime the old sharing mechanism (with the sharing flag)
continues to be supported, and the user can choose the way he wants to
share the counter.
The new indirect action API is only supported in DevX, so sharing
counter action in Verbs can only be done through the old mechanism.
[1] https://mails.dpdk.org/archives/dev/2020-July/174110.html
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Tx prepare should be called only when necessary to reduce the impact on
performance.
For partial TX offload, users need to call rte_eth_tx_prepare() to
invoke the tx_prepare callback of PMDs. In this callback, the PMDs
adjust the packet based on the offloading used by the user. (e.g. For
some PMDs, pseudo-headers need to be calculated when the TX cksum is
offloaded.)
However, for the users, they cannot grasp all the hardware and PMDs
characteristics. As a result, users cannot decide when they need to
actually call tx_prepare. Therefore, we should assume that the user
calls rte_eth_tx_prepare() when using any Tx offloading to ensure that
related functions work properly. Whether packets need to be adjusted
should be determined by PMDs. They can make judgments in the
dev_configure or queue_setup phase. When the related function is not
used, the pointer of tx_prepare should be set to NULL to reduce the
performance loss caused by invoking rte_eth_tx_repare().
In this patch, if tx_prepare is not required for the offloading used by
the users, the tx_prepare pointer will be set to NULL.
Fixes: bba6366983 ("net/hns3: support Rx/Tx and related operations")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The hns3_is_csq() and cmq_ring_to_dev() macro were defined in previous
version but never used.
Fixes: 737f30e1c3 ("net/hns3: support command interface with firmware")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Currently, driver uses gettimeofday() API to get the time, and
then calculate the time delta, the delta will be used mainly in
judging timeout process.
But the time which gets from gettimeofday() API isn't monotonically
increasing. The process may fail if the system time is changed.
We use the following scheme to fix it:
1. Add hns3_clock_gettime() API which will get the monotonically
increasing time.
2. Add hns3_clock_calctime_ms() API which will get the milliseconds of
the monotonically increasing time.
3. Add hns3_clock_calctime_ms() API which will calc the milliseconds of
a given time.
Fixes: 2790c64647 ("net/hns3: support device reset")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
If the reset process cost too much time, driver will log one error
message which formats the time delta, but the formatting is using
hexadecimal which was not readable.
This patch fixes it by formatting in decimal format.
Fixes: 2790c64647 ("net/hns3: support device reset")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch supports get preferred burst size and queues when call
rte_eth_dev_info_get() API with VF.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
The fwd_config_setup() is called after init_fwd_streams().
The fwd_config_setup() will reinitialize forwarding streams.
This patch removes init_fwd_streams() from init_config().
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
This patch adds fwd_config_setup() at the end of cmd_config_dcb_parsed()
to update "cur_fwd_config", so that the actual forwarding streams can be
queried by the "show config fwd" cmd.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Currently, the check for doing DCB test is assigned to
start_packet_forwarding(), which will be called when
run "start" cmd. But fwd_config_setup() is used in many
scenarios, such as, "port config all rxq".
This patch moves the check from start_packet_forwarding()
to fwd_config_setup().
Fixes: 7741e4cf16 ("app/testpmd: VMDq and DCB updates")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Currently, '.get_dcb_info' must be supported for the port doing DCB
test, or all information in 'rte_eth_dcb_info' are zero. It should be
prevented when user run cmd "port config 0 dcb vt off 4 pfc off".
This patch adds the check for support of reporting dcb info.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
After DCB mode is configured, if we decrease the number of RX and TX
queues, fwd_config_setup() will be called to setup the DCB forwarding
configuration. And forwarding streams are updated based on new queue
numbers in fwd_config_setup(), but the mapping between the TC and
queues obtained by rte_eth_dev_get_dcb_info() is still old queue
numbers (old queue numbers are greater than new queue numbers).
In this case, the segment fault happens. So rte_eth_dev_configure()
should be called again to update the mapping between the TC and
queues before rte_eth_dev_get_dcb_info().
Like:
set nbcore 4
port stop all
port config 0 dcb vt off 4 pfc on
port start all
port stop all
port config all rxq 8
port config all txq 8
Fixes: 900550de04 ("app/testpmd: add dcb support")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
After DCB mode is configured, the operations of port stop and port start
change the value of the global variable "dcb_test", As a result, the
forwarding configuration from DCB to RSS mode, namely,
“dcb_fwd_config_setup()” to "rss_fwd_config_setup()".
Currently, the 'dcb_flag' field in struct 'rte_port' indicates whether
the port is configured with DCB. And it is sufficient to have
'dcb_config' as a global variable to control the DCB test status. So
this patch deletes the "dcb_test".
In addition, setting 'dcb_config' at the end of init_port_dcb_config()
in case that ports fail to enter DCB mode.
Fixes: 900550de04 ("app/testpmd: add dcb support")
Fixes: ce8d561418 ("app/testpmd: add port configuration settings")
Fixes: 7741e4cf16 ("app/testpmd: VMDq and DCB updates")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
For the DCB forwarding test, each core is assigned to each traffic class.
Number of forwarding cores for DCB test must be equal or less than number
of total TC. Otherwise, the following problems may occur:
1/ Redundant polling threads will be created when forwarding cores number
is greater than total TC number.
2/ Two cores would try to use a same queue on a port when Rx/Tx queue
number is greater than the used TC number, which is not allowed.
Fixes: 900550de04 ("app/testpmd: add dcb support")
Fixes: ce8d561418 ("app/testpmd: add port configuration settings")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
All rights reserved by Beijing Wangxun Technology Co., Ltd.
Part of the code references Intel.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Support VXLAN-GPE in UDP tunnel port add and delete.
Fix to parsing packet type to pass hardware checksum.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
When requested MTU is bigger than mbuf size and scattered Rx is not
enabled, setting MTU fails for VF.
But scattered Rx can be enabled in next port start if required, so
enabling setting MTU bigger than mbuf size if device is stopped
independent from scattered Rx configuration.
Fixes: a2beaa4a76 ("net/txgbe: support VF MTU update")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Initialize meter policy list before use to avoid segment fault
Fixes: 0d73ddf25f ("net/softnic: add meter profile")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Return value of function 'eth_kni_dev_stop' passed to 'ret' is
rewritten later, and this is unreasonable.
This patch fixes it.
Fixes: 62024eb827 ("ethdev: change stop operation callback to return int")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
After restoring the remote states, the return value of ioctl() is not
checked. Therefore, users cannot know whether the remote state is
restored successfully.
This patch add log for restoring failure.
Fixes: 4810d3af83 ("net/tap: restore state of remote device when closing")
Cc: stable@dpdk.org
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Variable total, which may be zero and result in segmentation fault.
This patch fixed it.
Fixes: 9b1249d9ff ("app/testpmd: support dumping socket memory")
Cc: stable@dpdk.org
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In function cons_parse_ntuple_filter, item->spec and item->mask
should be confirmed not null before use memcmp on it, current
judgement (item->spec || item->mask) just can confirm item->spec
or item->mask is not null, and cause null pointer be used in
memcmp.
This patch fix this problem.
Fixes: b7eeecb175 ("net/txgbe: parse n-tuple filter")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Jiawen Wu <jiawenwu@trustnetic.com>
When the port is link down state, it is meaningless to display the
port link speed. It should be an undefined state.
Fixes: 59fad0f321 ("net/hns3: support link update operation")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
When port is stopped, link down should be reported to user. For HNS3
PF driver, link status comes from link status of hardware. If the port
supports NCSI feature, hardware MAC will not be disabled. At this case,
even if the port is stopped, the link status is still Up. So driver
should set link down when the port is stopped.
Fixes: 59fad0f321 ("net/hns3: support link update operation")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Support of the checksum offloading by checking
the relevant FW capability (csum_cap) for NIC support.
RX supported offloads:
DEV_RX_OFFLOAD_IPV4_CKSUM
DEV_RX_OFFLOAD_UDP_CKSUM
DEV_RX_OFFLOAD_TCP_CKSUM
TX supported offloads:
DEV_TX_OFFLOAD_IPV4_CKSUM
DEV_TX_OFFLOAD_UDP_CKSUM
DEV_TX_OFFLOAD_TCP_CKSUM
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Tested-by: Odi Assli <odia@nvidia.com>
mlx5 in Windows needs the hca capability csum_cap
to query the NIC for checksum offloading support.
Added the capability as part of the capabilities
queried by the PMD using DevX.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Tested-by: Odi Assli <odia@nvidia.com>
mlx5 offloads which are unsupported on Windows
are currently disabled by checks with IBV/DV flags
which are irrelevant to Windows.
The checks are removed until they are fully available.
Fixes: 93f4ece91a ("net/mlx5: spawn ethdev ports on Windows")
Cc: stable@dpdk.org
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Tested-by: Odi Assli <odia@nvidia.com>
If the device was configured as legacy bond one (without
involving E-Switch), the mlx5 PMD erroneously tried to deduce
the vport index raising the fatal error and preventing
device from being used.
The patch checks whether there is E-Switch present and we
should use vport index indeed.
Fixes: 2eb4d0107a ("net/mlx5: refactor PCI probing on Linux")
Fixes: d5c06b1b10 ("net/mlx5: query vport index match mode and parameters")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The mlx4 PMD tracks the buffers (mbufs) for the packets being
transmitted in the dedicated array named as "elts". The tx_burst
routine frees the mbufs from this array once it needs to rearm
the hardware descriptor and store the new mbuf, so it looks
like as replacement mbuf pointer in the elts array.
On the device stop mlx4 PMD freed only the part of elts according
tail and head pointers, leaking the rest of buffers, remained in
the elts array.
Fixes: a2ce2121c0 ("net/mlx4: separate Tx configuration functions")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
There are some leftovers of removed code - there are
no drop queue handling routines anymore.
Fixes: 78be885295 ("net/mlx5: handle drop queues as regular queues")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Currently meter algorithms only supports bytes units for meter profiles.
Using ASO feature, the driver can support metering in per packet units.
Add support for packet units in meter profiles.
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Currently ASO meter must be followed by policy table, so this adds
the support that connecting meter and policy table.
There are several cases to be considered:
1. For non-termination policy, connect meter to the default policy
table.
2. For non-RSS termination policy case, simply get the policy
table id and connect meter to it.
3. For RSS termination policy case, need to split the flow due
to RSS info in policy, and translate each sub-flow using that RSS,
then create the sub policy table to be connected.
4. In termination policy case, if there's no actions to modify the
packet before meter, no need to use set_tag to save meter id in
register. Only add a new flow in drop table using the same match
criteria as suf-flow, to save cache miss.
Signed-off-by: Shun Hao <shunh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
When a flow has a RSS action, the driver splits
each sub flow finally is configured with
a different HW TIR action.
Any RSS action configured in meter policy may cause
a split in the flow configuration.
To save performance, any TIR action will be configured
in different flow table, so policy can be split to
sub-policies per TIR in the flow creation time.
Create a function to prepare the policy and
its sub-policies for a configured flow with meter.
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Create a meter with the new pre-defined policy.
The following cases to be considered:
1.Add entry match with meter_id in global drop table.
2.For non-termination policy (policy id 0),
add jump rule to suffix table for green and
jump rule to drop table for red.
3.Allocate counter per meter in drop table.
4.Allocate meter resource per domain per color.
5.It can work with both ASO and legacy meter HW objects.
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
MLX5 PMD checks the validation of actions in policy while add
a new meter policy, if pass the validation, allocates the new
policy object from the meter policy indexed memory pool.
It is common to use the same policy for multiple meters.
MLX5 PMD supports two types of policy: termination policy and
no-termination policy.
Implement the next policy operations:
validate:
The driver doesn't support to configure actions in the flow
after the meter action except one case when the meter policy
is configured to do nothing in GREEN\YELLOW and only DROP action
in RED, this special policy is called non-terminated policy
and is handed as a singleton object internally.
For all the terminated policies, the next actions are supported:
GREEN - QUEUE, RSS, PORT_ID, JUMP, DROP, MARK and SET_TAG.
YELLOW - not supported at all -> must be empty.
RED - must include DROP action.
Hence, in ingress case, for example,
QUEUE\RSS\JUMP must be configured as last action for GREEN color.
All the above limitations will be validated.
create:
Validate the policy configuration.
Prepare the related tables and actions.
destroy:
Release the created policy resources.
Signed-off-by: Li Zhang <lizh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
When statically linked the function prandom_bytes is exposed
and might conflict with something in application. All driver
functions should use the same prefix.
Fixes: 9738793f28 ("net/bnxt: add VNIC functions and structs")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
1. Clean up unused function parameters.
2. Declare no external referenced function as static and remove
their prototype from the header file.
Fixes: ec77c62983 ("net/bnxt: add stats context allocation")
Fixes: 200b64ba0b ("net/bnxt: free statistics context")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
