Fix spelling and grammar errors. Re-organize sections for better explanation
in the documentation. Add a section describing compilation of CXGBE with DPDK.
Add a note describing that CXGBE currently only supports binding to PF4.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Updates hash library documentation, reflecting
the new implementation changes.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Two of the macros in rte_hash.h are now deprecated, so this patch
adds notice that they will be removed in 2.2.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The significant ABI change is planned for struct rte_eth_dev to support
up to 1024 queues per port which will be taken effect from release 2.2.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Update cxgbe documentation with the following:
1. Add instructions on how to flash firmware and config file on Chelsio T5
devices.
2. Add a list of supported devices.
3. Add instructions on how to enable and disable flow control via testpmd.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Refactor the ieee1588_fwd mode in testpmd to use the new ethdev
APIs to enable and read IEEE1588 PTP timestamps.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When a change makes really hard to keep ABI compatibility,
instead of waiting next release to break the ABI, it is smoother
to introduce the new code as a preview and disable it when packaging.
The flag RTE_NEXT_ABI must be used to "ifdef" the new code.
When the release is out, a dynamically linked application can use
the new shared libraries with the old ABI while developpers can prepare
their application for the next ABI by reading the deprecation notice
and easily testing the new code.
When starting the next release cycle, the "ifdefs" will be removed
and the ABI break will be marked by incrementing LIBABIVER. The map
files will also be updated.
The default value is enabled to be developer compliant.
The packagers must disable it as done in pkg/dpdk.spec.
When enabled, all shared library numbers are incremented by appending
a minor .1 to the old ABI number. In the next release, only impacted
libraries will have a major +1 increment.
The impacted libraries must provide an alternative map file to use
with this option.
The ABI policy is updated.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This patch extends flow director commands to support l2_payload flow type.
Test report: http://dpdk.org/ml/archives/dev/2015-June/020238.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This path renames the mirror type in rte_eth_mirror_conf and macros,
and rework the mirror set in ixgbe drivers by using new definition.
It also fixes some coding style.
Test report: http://dpdk.org/ml/archives/dev/2015-June/019118.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
If double vlan is detected, its stripped flag and vlan tags can be
printed on rxonly mode. Test command of 'tx_vlan set' is expanded
to set both single and double vlan tags on TX side for each packets
to be sent out.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Fix for a minor Sphinx build warning in the ABI guidelines docs:
versioning.rst:126: WARNING: Bullet list ends without a
blank line; unexpected unindent.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Adds cxgbe poll mode driver documentation under the usual doc/guides/nics/
directory with the rest of the drivers. The documentation covers cxgbe
implementation details, features and limitations, prerequisites,
configuration, and a sample application usage.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
When moving ABI policy to guidelines, the new doc was referred
without using sphinx link.
Fixes: f1ef9794f9 ("doc: add ABI guidelines")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
People have been asking for ways to use the ABI macros, heres some docs to
clarify their use. Included is:
* An overview of what ABI is
* Details of the ABI deprecation process
* Details of the versioning macros
* Examples of their use
* Details of how to use the ABI validator
Thanks to John Mcnamara, who duplicated much of this effort at Intel while I was
working on it. Much of the introductory material was gathered and cleaned up by
him.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Jenkins hash function was developed originally in 1996,
and was integrated in first versions of DPDK.
The function has been improved in 2006,
achieving up to 35% better performance, compared to the original one.
This patch integrates that code into the rte_jhash library.
It also updates the precalculated hash values in the unit test,
as the code now returns different values (expected).
A final note has been added in release notes for stating
the changes made.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add coding standards document to guides directory. This document
codifies the current DPDK C coding conventions, to make it easier for
contributors to see the format their code should be in.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This change adds automatic table references to the docs. The
table numbers in the generated Html and PDF docs are now
automatically numbered based on section.
Requires Sphinx >= 1.3.1.
This change:
* Adds a RST table:: directive to each table caption.
* Indents the tables to the required directive level.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
This change adds automatic figure references to the docs. The
figure numbers in the generated Html and PDF docs are now
automatically numbered based on section.
Requires Sphinx >= 1.3.1.
The patch makes the following changes.
* Changes image:: tag to figure:: and moves image caption
to the figure.
* Adds captions to figures that didn't previously have any.
* Un-templates the |image-name| substitution definitions
into explicit figure:: tags. They weren't used more
than once anyway and Sphinx doesn't support them
for figure.
* Adds a target to each image that didn't previously
have one so that they can be cross-referenced.
* Renamed existing image target to match the image
name for consistency.
* Replaces the Figures lists with automatic :numref:
:ref: entries to generate automatic numbering
and captions.
* Replaces "Figure" references with automatic :numref:
references.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
This change adds some simple handling for the :numref: directive
for Sphinx versions prior to 1.3.1. This allows the Guides
documentation to be built with older versions of Sphinx and still
produce reasonable results.
The patch replaces the :numref: reference with a link to the
target (for all Sphinx doc types). It doesn't try to label
figures/tables.
Full numref support with automatic figure/table numbering and
links can be obtained by upgrading to Sphinx 1.3.1 or later.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move xenvirt PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move vmxnet3 PMD to drivers/net directory.
As part of the move, rename the "vmxnet3" subdirectory, containing the
original FreeBSD drivers, from "vmxnet3" to the more standard name
"base", to indicate it contains the base drivers used for the
implementation.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move virtio PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move ring PMD to drivers directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move pcap pmd to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move null PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
move mlx4 PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
move ixgbe PMD to drivers/net directory.
As part of the move, we rename the ixgbe directory, containing the
ixgbe "base driver" code, from "ixgbe" to "base".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move i40e PMD to drivers/net directory.
As part of the move, rename the "i40e" directory, containing the "base
driver" code, from "i40e" to "base".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
move fm10k PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
move enic PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
[Thomas: move vnic/ to base/]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move e1000 pmd to drivers/net directory
As part of move, rename "e1000" subdirectory, which contains the code
from the "base driver", to "base".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move bonded ethdev pmd to drivers/net
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
move af_packet pmd to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add a new top-level "drivers" directory to which all PMDs will be moved
for easier maintenance of both lib folder and drivers themselves. This
new directory is a dependency of all the apps in the app folder, so
the makefiles for each app are updated.
To the new top-level directory add a "net" subdirectory to classify
more specifically our existing PMDs as ethernet drivers
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
[Thomas: fix dependencies and merge several patches]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch adds the ability to process console input in the same thread
as packet processing by using poll() function.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
NO_AUTOLIBS is not required as it was not used or defined in the config files.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Enabled Doxygen option to add links to the source code
in documented entities.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
Disabled the doxygen option to sort member data so that functions
and struct memebers are listed in order of definition in the
brief and main sections.
Previously they were sorted in the brief section and were in
definition order in the main section.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
Add a new wrapper to rte_mempool_create() to simplify the creation
of a packet mbuf pool.
This wrapper can be used if there is no specific mempool flags, and
no specific mbuf or pool constructor function, which is most of the
use cases.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Deduct the mbuf data room size from mempool->elt_size and priv_size,
instead of using an hardcoded value that is not related to the real
buffer size.
To use rte_pktmbuf_pool_init(), the user can either:
- give a NULL parameter to rte_pktmbuf_pool_init(): in this case, the
private size is assumed to be 0, and the room size is
mp->elt_size - sizeof(struct rte_mbuf).
- give the rte_pktmbuf_pool_private filled with appropriate
data_room_size and priv_size values.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Guide says that a configure parameter to choose between vhost cuse
and vhost user will be introduced in the future, but it’s already
added by commit 28a1ccca41.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Converted the Glossary table in the Programmer's Guide
to a definition list to improve rendering.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Some blocks are not visible with some Sphinx versions because
they are using the wrong keyword for code.
Tested with Sphinx v1.1.3.
Fixes: 1733be6d31 ("doc: new eal multi-pthread feature")
Fixes: ccefe752ca ("doc: add jobstats sample guide")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
CONFIG_RTE_MBUF_SCATTER_GATHER was renamed into CONFIG_RTE_MBUF_REFCNT
by commit 62814bc2e9 and removed by commit 4769bc5a27.
Some traces remain because of delayed patches.
It can also be removed from doxygen config.
It is now poisoned in rte_mbuf.h to warn any misuse.
Fixes: d0dff9ba44 ("doc: sample application user guide")
Fixes: fc1f2750a3 ("doc: programmers guide")
Fixes: 4769bc5a27 ("mbuf: remove build option to disable refcnt")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
- libmlx4 and libibverbs dependencies distributed with Mellanox OFED are now
also available on DPDK.org to make installation easier.
- Document Mellanox OFED and firmware versions to use.
- Add links to Mellanox and its community websites.
- Add kernel modules parameters section.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Added notes for i40e firmware version. As base driver to support the
latest version of firmware (FVL3E) hasn't been integrated, currently
the validated version of firmware is 4.2.6.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
Since txqflags is now set from the default rx/tx configuration,
depending on the PMD, it might not be 0.
Therefore, user has to overwrite it with --txqflags 0.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
It updated the user guide of testpmd, for the newly supported commands
of getting/setting hash functions, and the command of showing port
information.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Added some documentation on common issues for the vhost sample app
and how to resolve them.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
This patch adds a note to the release notes new features,
as a warning regarding the early status of the FM10K driver for pre-release access
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Since the uio_pci_generic module requires that the device to which it is
being bound supports legacy interrupts, there can be problems using it
with VF devices. Add a note to the GSG doc to document this fact, and
provide information on loading igb_uio as a replacement.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
Document the functions introduced by commit 64fc36064d.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
There are some references to DPDK.xyz.mk files that do not exist in the
dpdk tree. This was probably the result of an automatic replacement, so
restore the proper file names which are rte.xyz.mk.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Added information on testpmd user guide
for -l, --lcores and --master-lcore options
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
Create nics guide by moving chapters about Intel and Mellanox NICs.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
Xen is an environment comparable to Linux and FreeBSD which
have their own guide.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE has no effect since this option enables
MLX4_PMD_COMPAT_VMWARE. This macro is not used by the PMD which expects
MLX4_COMPAT_VMWARE instead.
Because this option does not work and the related code is no longer useful
for VMware (as it actually supports the flow steering API), remove it
entirely.
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The "manual" Latex template provided by Sphinx introduce a lot
of useless and confusing blank pages.
Let's remove them.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This mainly adds metadata but also includes an override to the
Latex formatter to control the font size in code blocks.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
When generating Latex for PDF, this error occurs:
! Undefined control sequence.
\version ->b'2.0.0-rc2\n
Decoding bytes stream into UTF-8 fixes the issue.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add make system support for building PDF versions of
the guides. Requires Python Sphinx and TexLive Full.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Changed all image.svg and image.png extensions to image.*
This allows Sphinx to decide the appropriate image type
from the available image options.
In case of PDF, SVG images are converted and Sphinx must pick
the converted version.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Refactored split cell in test_pipeline table to allow it to
convert cleanly to PDF.
The Sphinx/Latex converter doesn't handle split cells like the
following:
+-------------+--------------+
| Header 1 | Header 2 |
+=============+==============+
| | |
| | |
+-------------+ |
| | |
| | |
+-------------+--------------+
Instead the table was refactored to a simpler format:
+-------------+--------------+
| Header 1 | Header 2 |
+=============+==============+
| | |
| | |
+-------------+--------------+
| | |
| | |
+-------------+--------------+
The same information was retained in the table.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Change encoding of (r) from Latin-1 to UTF8 to match the other
symbols in the doc and to allow it to convert cleanly to PDF.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Removing Intel copyright from base of page for each document.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch add contents for major change in single virtio implementation,
also add back something for merge-able feature and promiscuous mode in virtio.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
Added a sample application guide for the rxtx_callbacks app.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Added a sample application guide for the basic forwarding
/skeleton app.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Let's make sure people will not forget to set and unset VIRTIO_DEV_RUNNING.
Signed-off-by: Benoît Canet <benoit.canet@nodalink.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
test-framework.sh is an old script to check building of some dependencies.
testhost is an old app used to check HOSTCC.
Let's clean the scripts directory.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Update the testpmd doc as there are new HW VLAN commands/options.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
This patch adds information to testpmd_funcs.rst file,
about limited number of vlan_ids possible to be enabled
in a filter. This is limited to the maximum number of entries
possible in the VFTA table.
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The patch introduces following commands.
- port attach [ident]
- port detach [port_id]
- attach: attaching a port
- detach: detaching a port
- ident: pci address of physical device.
Or device name and parameters of virtual device.
(ex. 0000:02:00.0, eth_pcap0,iface=eth0)
- port_id: port identifier
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch adds a new section for describing port hotplug framework.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
This documentation covers implementation details, features and limitations,
configuration, prerequisites and provides a usage example.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Since DPDK now has support for the in-tree uio_pci_generic driver,
update the programmers guide document to reference this module, and to use it
in preference to the igb_uio driver, which is DPDK-specific.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Since DPDK now has support for the in-tree uio_pci_generic driver,
update the GSG document to reference this module, and to use it
in preference to the igb_uio driver, which is DPDK-specific.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This library provide API to measure time spend in particular parts of
code and to calculate optimal polling time.
To calculate a those statistics application code need to be divided into
parts (called jobs) that do something. It is up to application to decide
what is considered a job.
Series of jobs must be surrounded with the rte_jobstats_context_start()
and rte_jobstats_context_finish() calls. After that, jobs might be
started. Each job must be surrounded with rte_jobstats_start() and
rte_jobstats_finish() calls.
After job finishes its execution, period in which it should be called
again is adjusted. It might be used to minimize time wasted on
unnecessary polls/calls. Adjustment is based on data provided by job
itself (ex: number of packets it processed).
After all jobs in serie are executed fallowing statistics are updated
and might be used by application. Statistics can be reset. Some of
provided statistic data:
- total/min/max execution - time spent in executing jobs.
- total/min/max management - time spent outside execution area. This
value might be used to measure overhead of scheduling jobs. This time
also contains overhead of rte_jobstats library itself.
- number of loops that executed at least one job
- executed jobs
- time when statistics were reset.
Each job provide total/min/max execution time and execution count
statistics.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Following commands of syn filter are removed:
- add_syn_filter (port_id) priority (high|low) queue (queue_id)
- remove_syn_filter (port_id)
- get_syn_filter (port_id)
New command is added for syn filter by using filter_ctrl API and new
syn filter structure:
- syn_filter (port_id) (add|del) priority (high|low) queue (queue_id)
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Following commands of flex filter are removed:
- add_flex_filter (port_id) len (len_value) bytes (bytes_string) mask (mask_value)
priority (prio_value) queue (queue_id)
- remove_flex_filter (port_id) index (idx)
- get_flex_filter (port_id) index (idx)
New command is added for flex filter by using filter_ctrl API and new flex filter structure:
- flex_filter (port_id) (add|del) len (len_value) bytes (bytes_value) mask (mask_value)
priority (prio_value) queue (queue_id)
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add requirements about compiler and distribution support.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch describes how to build and run he new packet ordering sample
application that exercises the reorder library.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch introduces a new section in the programmers guide describing
the reorder library.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Adding a document describing rudimentary ABI policy and adding notice space for
any deprecation announcements
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Added instructions for updating from DPDK 1.7.0 to 1.8.0
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Known issue regarding iommu/VT-d and igb_uio in Linux kernel version 3.15
to 3.17 where unbinding the device from the driver removes the 1:1 mapping
in the iommu resulting in IOMMU/DMAR errors when the device tries to
access memory.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Removed resolved issues from known issues section.
Added new resolved issues to resolved issues section.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Added to New and Supported features for VXLAN feature.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Added new and existing names of sample apps to list of
sample apps in release notes.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
fixed setup menu options in linux gsg to
keep in synch with setup.sh
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
In Release 1.8, the mbuf structure was significantly reworked to add
extra information, leading to the structure being split across two
cache lines, and the data pointer being replaced by an offset. The
description of the library in the programmer's guide document needs
to be updated to take account of these changes.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch added IBM ppc_64 descriptions, including architecture
support, compiling requirements on Linux.
Signed-off-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Removing Appendix A from Release Notes as Intel Licensing information is
no longer relevant in this document.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Removed redundant Intel legal info from linux gsg.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Removed multiple references to Intel(R) DPDK where no longer
relevant.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Removed references to Intel which
are no longer relevant in linux gsg.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Ring library section in PG had a couple of typos,
in the text and in one of the images
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Added new section in sample app UG for
the new VM power management app.
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Added second of the two figures in the VM power management app UG
VM power management request sequence
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Added first of the two figures in the VM power management app UG:
VM power mangament highlevel overview
Signed-off-by: Alan Carew <alan.carew@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The bsd license was missing from the exception path svg file.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The bsd license was missing from the link bonding svg files.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
corrected couple of typos in distributor application
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Since the DPDK is now part of the BSD ports collection, we should
recommend installing from ports as the best way to get it up and
running.
In order to achieve this, while still keeping the document readable, the
chapter on system requirements has been moved to instead be a section
within the chapter on compiling the DPDK outside of the ports
collection. This move is necessary, since it covered a lot of detail on
installing other ports required to build DPDK. These steps are not
needed when installing DPDK itself from ports.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The FreeBSD GSG rst files had very inconsistent line lengths for text
within paragraph blocks. Sometimes a line would be very short, while often
lines would be quite long.
This patch adjusts the formatting of the rst files so that lines break
at approx the 80-character mark, as is standard in the DPDK source code.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The index.html file for each of the "guide" docs had a hard-coded
date value in them of June 2014. Rather than update each of these
for each revision, just use the |today| directive to insert the date
at which the document was generated.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Moved commands in testpmd UG to set queue rates
to match order in testpmd command help.
Created new section "Filters" to match that
same section in testpmd UG, and moved all
commands related to it there.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
tx_checksum set function does not use bitmask anymore, but strings
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Added info in testpmd functions section for the following commands:
- tunnel_filter add
- tunnel_filter rm
- rx_vxlan_port add
- rx_vxlan_port rm
- port stop/start queue
- set port mac address filter (for VF)
- tx_checksum set
- tso set
- tso show
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
As Vhost will be a library in DPDK 1.8, adding a new section to
Programmer's Guide to describe its use.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
New distributor sample app user guide section for sample app user guide.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Adding details for link status interrupts and link status polling.
Adding details for mode 4 / mode 5
Tidying up rst document to conform to 80 character line limit
Adding diagrams to explain bonding modes
Removed link_bonding.png file
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
CACHE_LINE_SIZE is a macro defined in machine/param.h in FreeBSD and
conflicts with DPDK macro version.
Adding RTE_ prefix to avoid conflicts.
CACHE_LINE_MASK and CACHE_LINE_ROUNDUP are also prefixed.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
[Thomas: updated on HEAD, including PPC]
The 1.7 DPDK_Prog_Guide document in MSWord has been converted to rst format for
use with Sphinx. There is an rst file for each chapter and an index.rst file
which contains the table of contents.
The top level index file has been modified to include this guide.
This document contains some png image files. If any of these png files are modified
they should be replaced with an svg file.
This is the sixth document from a set of 6 documents.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
The 1.7 DPDK_SampleApp_UG document in MSWord has been converted to rst format for
use with Sphinx. There is an rst file for each chapter and an index.rst file
which contains the table of contents.
The top level index file has been modified to include this guide.
This document contains some png image files. If any of thes png files are modified
they should be replaced with an svg file.
This is the fifth document from a set of 6 documents.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
The 1.7 DPDK_TestPMD_App_UG document in MSWord has been converted to rst format for
use with Sphinx. There is an rst file for each chapter and an index.rst file
which contains the table of contents.
The top level index file has been modified to include this guide.
This is the fourth document from a set of 6 documents.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch first adds architecture specific directories to eal.
Then split the atomic operations to architecture specific and generic files.
Architecture specific files are put into the corresponding architecture
directory and common header are put into generic directory.
Update documentation generation with new generic/ directory.
Signed-off-by: Chao Zhu <bjzhuc@cn.ibm.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The 1.7 DPDK_Release_Notes document in MSWord has been converted to rst format for
use with Sphinx. There is an rst file for each chapter and an index.rst file
which contains the table of contents.
The top level index file has been modified to include this document.
This is the third document from a set of 6 documents
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
The 1.7 DPDK_FreeBSD_GSG document in MSWord has been converted to rst format for
use with Sphinx. There is an rst file for each chapter and an index.rst file
which contains the table of contents.
The top level index file has been modified to include this guide.
This is the second document from a set of 6 documents.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
The 1.7 DPDK_Linux_GSG document in MSWord has been converted to rst format for
use with Sphinx. There is an rst file for each chapter and an index.rst file
which contains the table of contents.
This is the first document from a set of documents.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add minimal configuration and index to validate new rules
inside "make doc" and "make doc-clean".
RTE_SPHINX_BUILD can be overriden.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
A doxygen group begins with /**@{*/ and ends with /**@}*/.
By enabling DISTRIBUTE_GROUP_DOC, the first comment is applied
to each undocumented member of the group.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
It seems that RTE_MBUF_SCATTER_GATHER is not the proper name for the
feature it provides. "Scatter gather" means that data is stored using
several buffers. RTE_MBUF_REFCNT seems to be a better name for that
feature as it provides a reference counter for mbufs.
The macro RTE_MBUF_SCATTER_GATHER is poisoned to ensure this
modification is seen by drivers or applications using it.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The Packet Framework pipeline library provides a standard methodology
(logically similar to OpenFlow) for rapid development of complex packet
processing pipelines out of ports, tables and actions.
A pipeline is constructed by connecting its input ports to its output ports
through a chain of lookup tables. As result of lookup operation into the
current table, one of the table entries (or the default table entry, in case
of lookup miss) is identified to provide the actions to be executed on the
current packet and the associated action meta-data.
The behavior of user actions is defined through the configurable table action
handler, while the reserved actions define the next hop for the current packet
(either another table, an output port or packet drop) and are handled
transparently by the framework.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
The stub table is a simple implementation of the Packet Framework table
API that produces lookup miss for all input packets.
It is used as simple cable-type forwarder by the Packet Framework
pipeline library.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Various types of hash tables presented under the Packet Framework toolbox.
Hash table types:
1. Extendible bucket (ext): when bucket is full, bucket is extended with
more keys
2. Least Recently Used (LRU): when bucket is full, the LRU entry is discarded
3. Pre-computed key signature: RX core extracts the key n-tuple from the
packet, computes the key signature and saves the key and key signature
within the packet meta-data; flow classification core performs the actual
lookup (the bucket search stage) after reading the key and key signature
from packet meta-data
4. Signature computed on-the-fly (do-sig version): the same CPU core extracts
the key n-tuple from pkt, computes key signature and performs the table
lookup
5. Configurable key size or optimized for single key size (8-byte, 16-byte
and 32-byte key sizes)
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Routing table for IPv6.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Routing table for IPv4.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
This file defines the operations to be implemented by
any Packet Framework table.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
Source port is a packet generator, similar to /dev/zero Linux device.
Sink port is a packet terminator (drops all input packets), similar
to /dev/null Linux device.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
The QoS hierarchical scheduler presented as Packet Framework port.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
The IPv4 reassembly operation is presented as a Packet Framework port.
The code duplication with examples/ip_reassembly sample application
to be addressed soon by linking the relevant library once upstreamed.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
[Thomas: update to new ip_frag library]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This port presents the IPv4 fragmentation operation as a Packet Framework port.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
[Thomas: update to new ip_frag library]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
ring_reader input port (on top of single consumer rte_ring)
ring writer output port (on top of single producer rte_ring)
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
The input port ethdev_reader implements the Packet Framework port API
on top of the Intel DPDK poll mode driver for a NIC RX queue.
The output port ethdev_writer implements the Packet Framework port API
on top of the Intel DPDK poll mode driver for a NIC TX queue.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
This file defines the port operations that have to be implemented
by Packet Framework ports.
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
Acked by: Ivan Boule <ivan.boule@6wind.com>
The ACL library is used to perform an N-tuple search over a set of rules with
multiple categories and find the best match for each category.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
Acked-by: Pablo de Lara Guarch <pablo.de.lara.guarch@intel.com>
[Thomas: some code-style changes]
This adds the code for a new Intel DPDK library for packet distribution.
The distributor is a component which is designed to pass packets
one-at-a-time to workers, with dynamic load balancing. Using the RSS
field in the mbuf as a tag, the distributor tracks what packet tag is
being processed by what worker and then ensures that no two packets with
the same tag are in-flight simultaneously. Once a tag is not in-flight,
then the next packet with that tag will be sent to the next available
core.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
[Thomas: add doxygen @file comment]
The "default" part in configuration filenames is misleading.
Rename this as "native", as this is the RTE_MACHINE that is set in these files.
This should make it clearer for people who build DPDK on a system then run it on
another one.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
It is now possible to build all projects from the examples/ directory
using one command from root directory.
Some illustration of what is possible:
- build examples in the DPDK tree for one target
# install the x86_64-default-linuxapp-gcc in
# ${RTE_SDK}/x86_64-default-linuxapp-gcc directory
user@droids:~/dpdk.org$ make install T=x86_64-default-linuxapp-gcc
# build examples for this new installation in
# ${RTE_SDK}/examples directory
user@droids:~/dpdk.org$ make examples T=x86_64-default-linuxapp-gcc
- build examples outside DPDK tree for several targets
# install all targets matching x86_64-*-linuxapp-gcc in
# ${RTE_SDK}/x86_64-*-linuxapp-gcc directories
user@droids:~/dpdk.org$ make install T=x86_64-*-linuxapp-gcc
# build examples for these installations in /tmp/foobar
user@droids:~/dpdk.org$ make examples T=x86_64-*-linuxapp-gcc O=/tmp/foobar
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This reverts commits
a0cdfcf9 (use pcap-config to guess compilation flags),
ef5b2363 (fix build with empty LIBPCAP_CFLAGS) and
60191b89 (fix build when pcap_sendpacket is unavailable).
These patches are creating more problems than solving the initial one
(which was a build error with too old pcap libraries).
Since old pcap libraries are not that common, just revert them.
Reported-by: Meir Tseitlin <mirots@gmail.com>
Reported-by: Mats Liljegren <mats.liljegren@enea.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Use pcap-config to populate CFLAGS and LDFLAGS.
LIBPCAP_CFLAGS and LIBPCAP_LDFLAGS can be used to override this (useful when
cross-compiling).
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Reference the new library in doxygen.
Move also some items from misc to a new basic section.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This will install the binary sdk (bin + modules + libs + headers + mk)
in the specified directory.
This directory can be used as RTE_SDK by external applications.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This variable $(O) can be used to specify a build directory
when doing an "install" procedure. The default is ".", which
means that targets will be built in the source dpdk.
This option is useful to compile outside of the source tree that may be
read-only.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This is a cheat sheet to build DPDK and can be used for a "make help".
It is explicitly described as a build help in order to concatenate it
with other helps such as test commands.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Ignore __attribute__ because it was wrongly parsed as an identifier.
This configuration is described in
http://www.stack.nl/~dimitri/doxygen/manual/preprocessing.html
Reported-by: Cyril Cressent <cyril.cressent@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Some functions are available only if RTE_MBUF_SCATTER_GATHER is enabled.
So it must be configured for doxygen parser.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
- add index page
- add doxygen configuration for API
- add doxygen CSS customization applied by a script
- HTML generation via make rules
The configuration is splitted in a static file and a make rule in order to
dynamically configure output format and path.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>