Reduce the verbosity in ecore_pglueb_rbc_attn_handler() while logging
errmsg during HW init. This could happen due to ungraceful exit of
previous driver instance.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
This patch removes unnecessary check in ixgbe_check_mq_mode, which
fixes the DCB configuration issue.
Fixes: 27b609cbd1 ("ethdev: move the multi-queue mode check to specific drivers")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
For vdev, just calling rte_eth_dev_close() isn't enough to free all
the resources allocated during device probe, e.g. for virtio-user,
virtio_user_pmd_remove(), i.e. the remove() method of a vdev driver,
needs to be called to unlink the socket file created during device
probe. So this patch calls the rte_eth_dev_detach() for vdev when
quitting testpmd.
vdevs detach on testpmd exit implemented as workaround to fix
a virtio-user issue. The issue was virtio-user cleanup is not
called and existing socket file not cleaned up which will fail
next run.
Added a comment that this workaround should be converted to a proper
cleanup, not something specific to virtio-user, and not something
specific to vdev and testpmd.
Fixes: af75078fec ("first public release")
Fixes: bd8f50a45d ("net/virtio-user: support server mode")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
eth_dev_last_created_port is used to store port id type and should
be extended to 16bits corresponding to ethdev port id range.
Fixes: f8244c6399 ("ethdev: increase port id range")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch corrects some spelling issues in i40e.rst and clarifies
which controllers and connections are part of the 700 Series.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Handle properly a case where the path (DPDK_PATCH_PATH
or DPDK_MAINTAINER_PATH) is set to point to a directory.
Signed-off-by: Juhamatti Kuusisaari <juhamatti.kuusisaari@coriant.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Update information for blacklist and whitelist options for secondary
process to share same from primary process.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Fix compilation errors on Centos 7.4 when CONFIG_RTE_KNI_KMOD_ETHTOOL
is set to 'y'.
Centos 7.4 needs HAVE_NDO_BRIDGE_GETLINK_FILTER_MASK_VLAN_FILL:
igb_main.c: In function ‘igb_ndo_bridge_getlink’:
igb_main.c:2289:2: error: too few arguments to function
‘ndo_dflt_bridge_getlink’
return ndo_dflt_bridge_getlink(skb, pid, seq, dev, mode, 0, 0, nlflags);
^
Centos 7.4 needs HAVE_VF_VLAN_PROTO and needs to redefine
ndo_set_vf_vlan to .extended.ndo_set_vf_vlan:
igb_main.c:2318:2: error: unknown field ‘ndo_set_vf_vlan’ specified
in initializer
.ndo_set_vf_vlan = igb_ndo_set_vf_vlan,
^
Signed-off-by: Dan Gora <dg@adax.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
rte_event_eth_rx_adapter_create allocates eth_devices for
currently available eth devices. For newly created eth
devices a new instance for rx adapter has to be created.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Nikhil Rao <nikhil.rao@intel.com>
Fix the call to rte_timer_reset_sync() in sw_event_timer_cb(). The
second parameter is the number of ticks, the third is the timer type.
Fixes: 6750b21bd6 ("eventdev: add default software timer adapter")
Signed-off-by: Dan Gora <dg@adax.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Intel's libsso_zuc library has been moved to a
new location, under "Intel Resource & Design Center".
The installation section of this PMD has been updated
to include the new instructions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Intel's libsso_snow3g library has been moved to a
new location, under "Intel Resource & Design Center".
The installation section of this PMD has been updated
to include the new instructions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Intel's libsso_kasumi library has been moved to a
new location, under "Intel Resource & Design Center".
The installation section of this PMD has been updated
to include the new instructions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
rte_cryptodev_get_header_session_size() and
rte_cryptodev_get_private_session_size() functions are
targeting symmetric sessions.
With the future addition of asymmetric operations,
these functions need to be renamed from *cryptodev_*_session_*
to *cryptodev_sym_*_session_* to be symmetric specific.
The two original functions are marked as deprecated
and will be removed in 18.08, so applications can still
use the functions in 18.05.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Shally Verma <shally.verma@caviumnetworks.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Some feature flags, such as RTE_CRYPTODEV_FF_MBUF_SCATTER_GATHER
are ambiguous. In this case, it is not clear if Scatter Gather lists
are supported in the input buffer and/or output buffer.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Functions rte_cryptodev_queue_pair_start/stop
are not really used in any of the crypto drivers
(they all just return 0 or -ENOTSUP).
Therefore, this API can be deprecated from 18.05
and removed in 18.08.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Functions rte_cryptodev_queue_pair_attach_sym_session
and rte_cryptodev_queue_pair_detach_sym_sessions
are not really used in any of the crypto drivers
(only one driver implements it and it just return 0).
Therefore, this API can be deprecated from 18.05
and removed in 18.08.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Cryptodev info structure currently contains
a pointer to an rte_pci_device structure.
This field depends on a specific bus type (PCI),
which is not following a bus independent design.
Following the same approach taken in ethdev, the field
will be replaced with a pointer to an rte_device structure.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Since the API changes made in 17.08, the session mempool
is not created anymore in each crypto device.
Therefore, there is no need to have, in the cryptodev info
structure, the maximum number of sessions supported per device
and per queue pair.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Add extra clarification about offset in source and
destination mbuf used in compressdev, when they
are a chain of mbufs.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reviewed-by: Shally Verma <shally.verma@caviumnetworks.com>
Session data can only be cleared once there are no
inflight operations using the session. It is the application's
responsability to make sure of this.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
As the private_xform data can be shared by many operations
and across queue_pairs, it would be performance impacting
for PMDs to track inflights associated with one. It makes
more sense to push the responsibility to the application to
keep track of its usage and only delete the private_xform when
there are no more ops using it.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Driver id field is not set/used anywhere,
so it should be removed from rte_compressdev structure.
Fixes: ed7dd94f7f ("compressdev: add basic device management")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
The list of workers cores was represented by 64-bit bitmask.
It doesn't work if system has cores with id higher than 63.
This fix changes list of workers cores to array of uint16_t.
The size of array equals to RTE_MAX_LCORE.
Fixes: 4c07e0552f ("crypto/scheduler: add multicore scheduling mode")
Cc: stable@dpdk.org
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Security protocol flag string was not added
when the actual flag was added.
Fixes: eadb4fa1e1 ("cryptodev: support security APIs")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Vipin Varghese <vipin.varghese@intel.com>
Extend the description of cryptodev feature flags,
adding extra information.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Crypto capability structure contains supported
sizes for key, IV, digest, etc. on different algorithms.
These sizes can be expressed as a single value or
a range of values.
The check was broken when a size was checked against
a range with multiple values.
Also, for more clarity, the param_range_check macro
has been converted into a function.
Fixes: 38227c0e3a ("cryptodev: retrieve device info")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
qp->temp_digest is already an array of uint8_t,
so no need to cast to uint8_t*.
Fixes: baf1e63bfd ("crypto/aesni_gcm: do not append digest")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Missing AES-CMAC supported parameters
in PMD capabilities.
Fixes: 6491dbbece ("crypto/aesni_mb: support AES CMAC")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Since arm64 was using plain memcpy for rte_memcpy, gcc 8.1, could
detect size was more than source address range. In this case, the
source was wrong.
test/test/test_cryptodev.c: In function 'test_multi_session_random_usage':
rte_memcpy_64.h:364:29: error: 'memcpy'
forming offset [113, 184] is out of the bounds [0, 112] of object
'testsuite_params' with type 'struct crypto_testsuite_params'
[-Werror=array-bounds]
#define rte_memcpy(d, s, n) memcpy((d), (s), (n))
^~~~~~~~~~~~~~~~~~~~~
test/test/test_cryptodev.c:6618:3: note:
in expansion of macro 'rte_memcpy'
rte_memcpy(&ut_paramz[i].ut_params, &testsuite_params,
^~~~~~~~~~
test/test/test_cryptodev.c:140:39: note:
'testsuite_params' declared here
static struct crypto_testsuite_params testsuite_params = { NULL };
Fixes: ffbe3be0d4 ("app/test: add libcrypto")
Cc: stable@dpdk.org
Suggested-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
inlined from ‘cperf_test_vector_get_from_file’ at
app/test-crypto-perf/cperf_test_vector_parsing.c:578:11:
app/test-crypto-perf/cperf_test_vector_parsing.c:510:3: error:
‘strncpy’ output truncated before terminating nul copying as many bytes
from a string as its length [-Werror=stringop-truncation]
strncpy(entry, line, strlen(line));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
app/test-crypto-perf/cperf_test_vector_parsing.c:528:5: error:
‘strncat’ output truncated before terminating nul copying as many bytes
from a string as its length [-Werror=stringop-truncation]
strncat(entry, line, strlen(line));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Found this issue with meson build and gcc 8.1.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch fixes the possible duplicated ring names in multi-core
scheduler. Originally two or more multi-core schedulers may have
same worker ring names thus will cause initialization error.
Fixes: 4c07e0552f ("crypto/scheduler: add multicore scheduling mode")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
When scheduler mode changed from multicore to roundrobin and
back to multicore, scheduler tries to create memory rings with
the same name and fails. The fix allows to lookup and re-use
previously allocated memory rings.
Fixes: 4c07e0552f ("crypto/scheduler: add multicore scheduling mode")
Cc: stable@dpdk.org
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Tested-by: Reshma Pattan <reshma.pattan@intel.com>
Fixing CHECKED_RETURN issue by checking values returned
by rte_bbdev_dec_op_alloc_bulk and rte_bbdev_enc_op_alloc_bulk
functions.
Coverity issue: 279447, 279456
Fixes: f714a18885 ("app/testbbdev: add test application for bbdev")
Cc: stable@dpdk.org
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
There are some resource leaks in ifpga_scan_one.
This patch fixes it.
Coverity issue: 279459
Fixes: 05fa3d4a65 ("bus/ifpga: add Intel FPGA bus library")
Cc: stable@dpdk.org
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
The control variable should be afu_dev not dev.
Coverity issue: 279455
Fixes: 05fa3d4a65 ("bus/ifpga: add Intel FPGA bus library")
Cc: stable@dpdk.org
Signed-off-by: Rosen Xu <rosen.xu@intel.com>
A device like failsafe can manage sub-devices.
When removing such device, it removes its sub-devices
and try to take the same vdev_device_list_lock.
It was causing a deadlock because the lock was not recursive.
Fixes: 35f462839b ("bus/vdev: add lock on device list")
Suggested-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Matan Azrad <matan@mellanox.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
GCC 8.1 warned:
In function 'rte_eth_rx_burst':
rte_ethdev.h:3836:18: warning: conversion to 'int16_t'
{aka 'short int'} from 'uint16_t' {aka 'short unsigned int'}
may change the sign of the result [-Wsign-conversion]
int16_t nb_rx = (*dev->rx_pkt_burst)(dev->data->rx_queues[queue_id],
^
rte_ethdev.h:3844:50: warning: conversion to 'uint16_t'
{aka 'short unsigned int'} from 'int16_t' {aka 'short int'}
may change the sign of the result [-Wsign-conversion]
nb_rx = cb->fn.rx(port_id, queue_id, rx_pkts, nb_rx,
^~~~~
rte_ethdev.h:3844:12: warning: conversion to 'int16_t'
{aka 'short int'} from 'uint16_t' {aka 'short unsigned int'}
may change the sign of the result [-Wsign-conversion]
nb_rx = cb->fn.rx(port_id, queue_id, rx_pkts, nb_rx,
^~
rte_ethdev.h:3851:9: warning: conversion to 'uint16_t'
{aka 'short unsigned int'} from 'int16_t' {aka 'short int'}
may change the sign of the result [-Wsign-conversion]
return nb_rx;
^~~~~
The second part of the patch is solved by its own basic
block because it is inside a preprocessor conditional.
Bringing the declaration of the var to the top of the
function would require that also being given its own
preprocessor conditional, or a (void)var to avoid an
unused var warning. The basic block is no worse than
those imho.
Fixes: 467465d86d ("ethdev: add packet count parameter to Rx callback")
Fixes: 4dc294158c ("ethdev: support optional Rx and Tx callbacks")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
GCC 8.1 warned:
In function 'rte_pktmbuf_prepend':
rte_mbuf.h:1908:17: warning: conversion from 'int' to 'uint16_t'
{aka 'short unsigned int'} may change value [-Wconversion]
m->data_off -= len;
^~~
m->data_off is a uint16_t
uint16_t data_off;
len (a uint16_t) is promoted to an int using -=. Do the
subtraction explicitly and cast the result to uint16_t.
The below += or -= changes are solving the same thing.
In function 'rte_pktmbuf_adj':
rte_mbuf.h:1969:17: warning: conversion from 'int' to 'uint16_t'
{aka 'short unsigned int'} may change value [-Wconversion]
m->data_off += len;
^~~
In function 'rte_pktmbuf_chain':
rte_mbuf.h:2082:19: warning: conversion from 'int' to 'uint16_t'
{aka 'short unsigned int'} may change value [-Wconversion]
head->nb_segs += tail->nb_segs;
^~~~
Also uint16_t
uint16_t nb_segs; /**< Number of segments. */
Fixes: 08b563ffb1 ("mbuf: replace data pointer by an offset")
Fixes: 1a60a0daa6 ("mbuf: fix segments number type increase")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
GCC 8.1 warned:
In function 'rte_validate_tx_offload':
rte_mbuf.h:2112:19: warning: conversion to 'uint64_t'
{aka 'long unsigned int'} from 'int' may change the
sign of the result [-Wsign-conversion]
inner_l3_offset += m->outer_l2_len + m->outer_l3_len;
^~
uint64_t inner_l3_offset...
/* fields for TX offloading of tunnels */
uint64_t outer_l3_len:9; /**< Outer L3 (IP) Hdr Length. */
uint64_t outer_l2_len:7; /**< Outer L2 (MAC) Hdr Length. */
We want to do the arithmetic entirely in uint64_t
space, but with the +=, the rhs type becomes int since the
bitfields will fit in int.
Elaborate the artithmetic to be u64 = u64 + int + int, so
the type of the result is correct to be stored in the u64.
Fixes: 4fb7e803eb ("ethdev: add Tx preparation")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
GCC 8.1 warned:
In function 'rte_pktmbuf_linearize':
rte_mbuf.h:1873:32: warning: conversion to 'int' from 'uint32_t'
{aka 'unsigned int'} may change the sign of the result [-Wsign-conversion]
rte_mbuf.h:2166:13: note: in expansion of macro 'rte_pktmbuf_pkt_len'
copy_len = rte_pktmbuf_pkt_len(mbuf) - rte_pktmbuf_data_len(mbuf);
rte_mbuf.h:2180:51: warning: conversion to 'size_t'
{aka 'long unsigned int'} from 'int' may change the
sign of the result [-Wsign-conversion]
rte_memcpy(buffer, rte_pktmbuf_mtod(m, char *), seg_len);
^~~~~~~
The temp is consumed as a size_t. So let's make it
a size_t in the first place.
Fixes: 1feda4d8fc ("mbuf: add a function to linearize a packet")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
GCC 8.1 warned:
In function 'rte_pktmbuf_detach':
rte_mbuf.h:1583:17: warning: conversion from 'uint32_t'
{aka 'unsigned int'} to 'uint16_t' {aka 'short unsigned int'}
may change value [-Wconversion]
m->priv_size = priv_size;
^~~~~~~~~
The temp priv_size is declared as a uint32_t. But it
only deals in uint16_t. m->priv_size is a uint16_t.
Change it to a uint16_t.
Fixes: 355e6735b3 ("mbuf: fix cloning with private mbuf data")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
