Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.
Do not update the command line library to avoid adding a dependency to
librte_net.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Traditionally, only a single buffer pool per port
(or, per-port-per-socket) is created in l3fwd application.
If separate pools are created per-port, it might lead to gain in
performance as packet alloc/dealloc requests would be isolated
across ports (and their corresponding lcores).
This patch adds an argument '--per-port-pool' to the l3fwd application.
By default, old mode of single pool per port (split on sockets) is
active.
L3fwd user guide is also updated by this patch.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Ruifeng Wang <ruifeng.wang@arm.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
ethdev layer introduced checks for application requested RSS hash
functions and returns error for ones unsupported by hardware
This check breaks some sample applications which blindly configures
RSS hash functions without checking underlying hardware support.
Updated examples to mask out unsupported RSS has functions during device
configuration.
Prints a log if configuration values updated by this check.
Fixes: aa1a6d87f1 ("ethdev: force RSS offload rules again")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Meijuan Zhao <meijuanx.zhao@intel.com>
Tested-by: Yingya Han <yingyax.han@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload
For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.
The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE
The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
In order to fix this common mistake in all external applications,
the function rte_eth_dev_count is deprecated, while introducing
the new functions rte_eth_dev_count_avail and rte_eth_dev_count_total.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application assume a valid port index is in the range [0..count[.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be valid
- old ports being detached (RTE_ETH_DEV_UNUSED) can be valid
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the function rte_eth_dev_is_valid_port.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be seen
- old ports being detached (RTE_ETH_DEV_UNUSED) can be seen as ghosts
- failsafe sub-devices (RTE_ETH_DEV_DEFERRED) will be seen by the application
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the iterator RTE_ETH_FOREACH_DEV.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Increase the default RX/TX ring sizes to 1024/1024 to
accommodate for NICs with higher throughput (25G, 40G etc)
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The l3fwd program became chatty, and the code looks cluttered in
recent versions. DPDK programs should try for Unix (not VMS) style
and not print messages for the options user selected. Also, errors should
be printed on stderr. To make it easier to find code matching error
messages; error strings should be placed in situ rather than saved
as string vaiables.
Fixes: 268888b5b0 ("examples/l3fwd: modularize")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
All PCI functionality should be hidden from apps via the PCI bus driver,
the EAL and individual device drivers. Therefore remove the inclusion of
rte_pci.h from sample apps.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The memzone header is often included without good reason.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since VF can not disable/enable HW CRC strip for non-DPDK PF drivers,
and kernel driver almost default enable that feature, if disable it in
example app's rxmode, VF driver will report the VF launch failure. So
this patch default to enable HW CRC strip to let VF launch successful.
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The variable optind should be reset to one not zero.
From the man page:
"The variable optind is the index of the next element to be processed in
argv. The system initializes this value to 1.
The caller can reset it to 1 to restart scanning of the same argv, or when
scanning a new argument vector.”
The problem I saw with my application was trying to parse the wrong
option, which can happen as DPDK parses the first part of the command line
and the application parses the second part. If you call getopt() multiple
times in the same execution, the behavior is not maintained when using
zero for optind.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Avoid the use of several strncpy() since getopt is able to
map a long option with an id, which can be matched in the
same switch/case than short options.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Update l3fwd example usage and documentation with missing options.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The rte_eth_dev_count() function will never return a value greater
than RTE_MAX_ETHPORTS, so that checking is useless.
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Define and use ETH_LINK_UP and ETH_LINK_DOWN where appropriate.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Not all tx ports was included in tx_port_id array, used to periodically
drain only available ports. This caused that some packets remain in buffer
when application stops to receiving packets.
Fixes: 52c97adc1f ("examples/l3fwd: fix exact match performance")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
As a example to use ptype info, l3fwd needs firstly to use
rte_eth_dev_get_supported_ptypes() API to check if device and/or
its PMD driver will parse and fill the needed packet type; if not,
use the newly added option, --parse-ptype, to analyze it in the
callback softly.
As the mode of EXACT_MATCH uses the 5 tuples to caculate hash, so
we narrow down its scope to:
a. ip packets with no extensions, and
b. L4 payload should be either tcp or udp.
Note: this patch does not completely solve the issue, "cannot run
l3fwd on virtio or other devices", because hw_ip_checksum may be
not supported by the devices. Currently we can:
a. remove this requirements, or
b. wait for virtio front end (pmd) to support it.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Added validation for queue id of config parameter tuple.
This validation enforces user to enter queue ids of a port
from 0 and in sequence.
This additional validation on queue ids avoids ixgbe crash caused
by null rxq pointer access inside ixgbe_dev_rx_init.
Reason for null rxq is, L3fwd application allocates memory only for
queues passed by user. But rte_eth_dev_start tries to initialize rx
queues in sequence from 0 to nb_rx_queues,
which is not true and coredump while accessing the unallocated queue .
Fixes: af75078fec ("first public release")
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
It seems that for the most use cases, previous hash_multi_lookup provides
better performance, and more, sequential lookup can cause significant
performance drop.
This patch sets previously optional hash_multi_lookup method as default.
It also provides some minor optimizations such as queue drain only on used
tx ports.
Fixes: 94c54b4158 ("examples/l3fwd: rework exact-match")
Fixes: dc81ebbaca ("lpm: extend IPv4 next hop field")
Fixes: 64d3955de1 ("examples/l3fwd: fix ARM build")
Reported-by: Qian Xu <qian.q.xu@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Enable NEON support in exact match mode.
l3fwd example did not compile on ARM due to SSE2 instrincics used
in generic part.
Some instrinsins were used to initialize data structures and those were
replaced by ordinary structure initalization.
All SSE2 intrinsics used in forwarding, i.e. masking the IP/TCP header
are moved to single inline function and made arch-specific.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
The main problem with l3fwd is that it is too monolithic with everything
being in one file, and the various options all controlled by compile time
flags. This means that it's hard to read and understand, and when making
any changes, you need to go to a lot of work to try and ensure you cover
all the code paths, since a compile of the app will not touch large parts
of the l3fwd codebase.
Following changes were done to fix the issues mentioned above
- Split out the various lpm and hash specific functionality into separate
files, so that l3fwd code has one file for common code e.g. args
processing, mempool creation, and then individual files for the various
forwarding approaches.
Following are new file lists
main.c (Common code for args processing, memppol creation, etc)
l3fwd_em.c (Hash/Exact match aka 'EM' functionality)
l3fwd_em_sse.h (SSE4_1 buffer optimizated 'EM' code)
l3fwd_lpm.c (Longest Prefix Match aka 'LPM' functionality)
l3fwd_lpm_sse.h (SSE4_1 buffer optimizated 'LPM' code)
l3fwd.h (Common include for 'EM' and 'LPM')
- The choosing of the lpm/hash path should be done at runtime, not
compile time, via a command-line argument. This will ensure that
both code paths get compiled in a single go
Following examples show runtime options provided
Select 'LPM' or 'EM' based on run time selection f.e.
> l3fwd -c 0x1 -n 1 -- -p 0x1 -E ... (EM)
> l3fwd -c 0x1 -n 1 -- -p 0x1 -L ... (LPM)
Options "E" and "L" are mutualy-exclusive.
If none selected, "L" is default.
Signed-off-by: Ravi Kerur <rkerur@gmail.com>
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Tested-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
clang reports this error:
examples/l3fwd/main.c:550:1: error: unused function 'send_packetsx4'
The function is used only when ENABLE_MULTI_BUFFER_OPTIMIZE is 1.
Fixes: 96ff445371 ("examples/l3fwd: reorganise and optimize LPM code path")
Fixes: 6f1c1e28d9 ("examples/l3fwd: fix build with exact-match enabled")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
fix the error reported by checkpatch:
"ERROR: return is not a function, parentheses are not required"
remove parentheses in return like:
"return (logical expressions)"
remove parentheses in return a function like:
"return (rte_mempool_lookup(...))"
Fixes: 6307b909b8 ("lib: remove extra parenthesis after return")
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Handle SIGINT and SIGTERM in l3fwd.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
l3fwd app expects PMDs to return packets whose L2 header is
16-byte aligned due to usage of _mm_load_si128()/_mm_store_si128()
intrinsics in the app. However, most of the protocol stacks expects
packets such that its IP/L3 header be aligned on a 16-byte boundary.
Based on the recommendations received on dpdk-dev, we are changing
the l3fwd app to use _mm_loadu_si128()/_mm_loadu_si128() so that the
address need not be 16-byte aligned and thereby preventing crash.
We have tested that there is no performance impact due to this
change.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Lookup burst size was changed for exact match
from 4 to 8, for both ipv4 and ipv6, but actually only
4 keys were being looked up for ipv6, instead of 8,
causing random segmentation faults.
Fixes: 80fcb4d4 ("examples/l3fwd: increase lookup burst size to 8")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Fix minor, and non critical, copy and paste error in strncmp() of eth-dest
commandline argument.
Fixes: bd785f6f67 ("examples/l3fwd: make destination mac address configurable")
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Andrey Chilikin <andrey.chilikin@intel.com>
The extended unified packet type is now part of the standard ABI.
As mbuf struct is changed, the mbuf library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
L3fwd was trying to use an inexistent function "simple_ipv6_fwd_4pkts",
instead it should be "simple_ipv6_fwd_8pkts", and "simple_ipv8_fwd_4pkts"
instead of "simple_ipv4_fwd_8pkts".
clang reports some unused functions, used only for LPM lookup:
examples/l3fwd/main.c:545:1: error: unused function 'send_packetsx4'
examples/l3fwd/main.c:1165:1: error: unused function 'rfc1812_process'
Fixes: 80fcb4d4 ("examples/l3fwd: increase lookup burst size to 8")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
[Thomas: more #if to fix clang warnings]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
With the new hash implementation, the minimum lookup burst size
to get good performance is 8, since its internal pipeline
consists of 4 stages of 2 entries each, so to avoid
duplication, burst size should be 8 or more entries.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
To unify packet types among all PMDs, bit masks of packet type for
'ol_flags' are replaced by unified packet type.
To avoid breaking ABI compatibility, all the changes would be
enabled by RTE_NEXT_ABI.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The cuckoo hash has a fixed number of entries per bucket, so the
configuration parameter for this is unused. We change this field in the
parameters struct to "reserved" to indicate that there is now no such
parameter value, while at the same time keeping ABI consistency.
Fixes: 48a3991196 ("hash: replace with cuckoo hash implementation")
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch simply applies the transform previously committed in
scripts/cocci/mtod-offset.cocci. No other modifications have been
made here.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add a command-line parameter to l3fwd, to allow the user to specify the
destination mac address for each ethernet port used.
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Latest mbuf changes (priv_size addition and related fixes)
exposed small problem with testpmd and few other sample apps:
when mbuf size is exaclty 2KB or less, that causes
ixgbe PMD to select scattered RX even for configs with 'normal'
max packet length (max_rx_pkt_len == ETHER_MAX_LEN).
To overcome that problem and unify the code, new macro was created
to represent recommended minimal buffer length for mbuf.
When appropriate, samples are updated to use that macro.
Fixes: dfb03bbe2b ("app/testpmd: use standard functions to initialize
mbufs and mbuf pool")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
When it's possible, use the new helper to create the mbuf pools.
Most of the patch is trivial, except for the following files that
have some specifics (indirect mbufs):
- ip_fragmentation
- ip_pipeline
- ipv4_multicast
- vhost
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
New data type to manipulate 256 bit AVX values.
Rename field in the rte_xmm to keep common naming across SSE/AVX fields.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Fix the following error:
error: unused function 'l3fwd_simple_forward'
The l3fwd_simple_forward() is maybe unused, due to compilation options
(APP_LOOKUP_METHOD, ENABLE_MULTI_BUFFER_OPTIMIZE). As the combinatorial
is quite big, it looks simpler to add the __attribute__((unused)) on
this function, so that the compiler does not complain.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
