Added support for CN10K SoC DMA engine to dmadev.
Signed-off-by: Radha Mohan Chintakuntla <radhac@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Currently the example using DMA in asynchronous mode, which are:
nb_rx = rte_eth_rx_burst();
if (nb_rx == 0)
continue;
...
dma_enqueue(); // enqueue the received packets copy request
nb_cpl = dma_dequeue(); // get copy completed packets
...
There are no waiting inside dma_dequeue(), and this is why it's called
asynchronus. If there are no packet received, it won't call
dma_dequeue(), but some packets may still in the DMA queue which
enqueued in last cycle. As a result, when the traffic is stopped, the
sent packets and received packets are unbalanced from the perspective
of the traffic generator.
The patch supports DMA dequeue when no packet received, it helps to
judge the test result by comparing the sent packets with the received
packets on traffic generator sides.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Kevin Laatz <kevin.laatz@intel.com>
As part of the agreed process for deprecating KNI in DPDK, the example
app is scheduled for removal as part of the 22.11 release.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
NVIDIA acquired Mellanox Technologies in 2020.
The DPDK documentation and code might still include instances
of or references to Mellanox trademarks (like BlueField and ConnectX)
that are now NVIDIA trademarks.
The PCI IDs and copyrights are unchanged.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Gal Cohen <galco@nvidia.com>
Add support for vector aggregation of crypto operations for cn10k.
Crypto operations will be grouped by sub event type, flow id, scheduler
type and queue id fields from rte_event_crypto_metadata::response_info.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Introduce ability to aggregate crypto operations processed by event
crypto adapter into single event containing rte_event_vector whose event
type is RTE_EVENT_TYPE_CRYPTODEV_VECTOR.
Application should set RTE_EVENT_CRYPTO_ADAPTER_EVENT_VECTOR in
rte_event_crypto_adapter_queue_conf::flag and provide vector configuration
with respect of rte_event_crypto_adapter_vector_limits, which could be
obtained by calling rte_event_crypto_adapter_vector_limits_get, to enable
vectorization.
The event crypto adapter would be responsible for vectorizing the crypto
operations based on provided response information in
rte_event_crypto_metadata::response_info.
Updated drivers and tests accordingly to new API.
Signed-off-by: Volodymyr Fialko <vfialko@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The CDEV_LOG_* macros already add a '\n' at the end of
the line. Remove it from format strings to avoid duplicated
newlines.
Fixes: 9e6edea418 ("cryptodev: add APIs to assist PMD initialisation")
Fixes: e764cd72a9 ("cryptodev: update symmetric session structure")
Fixes: 1d6f89885e ("cryptodev: add sym session mempool create")
Fixes: 1f1e4b7cba ("cryptodev: use single mempool for asymmetric session")
Fixes: 757f40e28e ("cryptodev: modify return value for asym session create")
Fixes: cea66374dc ("cryptodev: support asymmetric operations")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add trace points for cryptodev functions.
Some of the APIs are restructured to add traces and return
appropriately as needed.
Signed-off-by: Amit Prakash Shukla <amitprakashs@marvell.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add enumeration in EC xform for FPM (fixed point multiplication).
Crypto driver would need this to xform point multiplication based
on given type of EC curve.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Gowrishankar Muthukrishnan <gmuthukrishn@marvell.com>
Acked-by: Kai Ji <kai.ji@intel.com>
ShangMi 3 (SM3) is a cryptographic hash function used in
the Chinese National Standard.
- Added SM3 algorithm
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Kai Ji <kai.ji@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
ShangMi 4 (SM4) is a block cipher used in the
Chinese National Standard for Wireless LAN WAPI and also
used with Transport Layer Security.
Added SM4 encryption algorithm in ECB, CBC and CTR modes.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Kai Ji <kai.ji@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The API rte_security_get_userdata() was being unused by most of
the drivers and it was retrieving userdata from mbuf dynamic field.
Hence, the API was removed and the application can directly get the
userdata from dynamic field. This helps in removing extra checks
in datapath.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Modify reader/writer lock to avoid starvation of writer. The previous
implementation would cause a writer to get starved if readers kept
acquiring the lock. The new version uses an additional bit to indicate
that a writer is waiting and which keeps readers from starving the
writer.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
DPDK libraries should never call rte_exit on failure, so change the
function return type of rte_metrics_init to "int" to allow returning an
error code to the application rather than exiting the whole app on init
failure.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Library functions should not cause the app to exit or panic. Replace the
existing panic call in the EAL remote launch functions with an error
code return instead.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Deprecation notice targeted for v22.11 of event vector has been
merged in the following commits, remove deprecation notices.
Fixes: 0fbb55efa5 ("eventdev: add element offset to event vector")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Replace *u64s with u64s in rte_event_vector structure as
the *ptrs already serves the purpose of holding pointers
and the intention of u64s is to hold array of uint64_t
values.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add `rte` prefix to stop flush callback function pointer
declaration to avoid conflicts with application functions,
``eventdev_stop_flush_t`` is renamed to
``rte_eventdev_stop_flush_t``.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch addresses an issue of enqueuing more than
max_enq_depth and not able to dequeuing events equal
to max_cq_depth in a single call of rte_event_enqueue_burst
and rte_event_dequeue_burst.
Apply fix for restricting enqueue of events to max_enq_depth
so that in a single rte_event_enqueue_burst() call at most
max_enq_depth events are enqueued.
Also set per port and domain history list sizes based on
cq_depth. This results in dequeuing correct number of
events as set by max_cq_depth.
Fixes: f3cad285bb ("event/dlb2: add infos get and configure")
Cc: stable@dpdk.org
Signed-off-by: Abdullah Sevincer <abdullah.sevincer@intel.com>
This commit implements the changes required for using suggested
port type hint feature. Each port uses different credit quanta
based on port type specified using port configuration flags.
Each port has separate quanta defined in dlb2_priv.h
Producer and consumer ports will need larger quanta value to reduce number
of credit calls they make. Workers can use small quanta as they mostly
work out of locally cached credits and don't request/return credits often.
Signed-off-by: Abdullah Sevincer <abdullah.sevincer@intel.com>
If producer thread is only acting as a bridge between NIC and DLB, then
performance can be greatly improved by bypassing the fence instruction.
DLB enqueue API calls memory fence once per enqueue burst. If producer
thread is just reading from NIC and sending to DLB without updating
the read buffers or buffer headers OR producer is not writing
to data structures with dependencies on the enqueue write order, then
fencing can be safely disabled.
Signed-off-by: Abdullah Sevincer <abdullah.sevincer@intel.com>
For best performance, applications running on certain cores should use
the DLB device locally available on the same tile along with other
resources. To allocate optimal resources, probing is done for each
producer port (PP) for a given CPU and the best performing ports are
allocated to producers. The CPU used for probing is either the first
core of producer coremask (if present) or the second core of EAL
coremask. This will be extended later to probe for all CPUs in the
producer coremask or EAL coremask.
Producer coremask can be passed along with the BDF of the DLB devices.
"-a xx:y.z,producer_coremask=<core_mask>"
Applications also need to pass RTE_EVENT_PORT_CFG_HINT_PRODUCER during
rte_event_port_setup() for producer ports for optimal port allocation.
For optimal load balancing ports that map to one or more QIDs in common
should not be in numerical sequence. The port->QID mapping is application
dependent, but the driver interleaves port IDs as much as possible to
reduce the likelihood of sequential ports mapping to the same QID(s).
Hence, DLB uses an initial allocation of Port IDs to maximize the
average distance between an ID and its immediate neighbors. Using
the initialport allocation option can be passed through devarg
"default_port_allocation=y(or Y)".
When events are dropped by workers or consumers that use LDB ports,
completions are sent which are just ENQs and may impact the latency.
To address this, probing is done for LDB ports as well. Probing is
done on ports per 'cos'. When default cos is used, ports will be
allocated from best ports from the best 'cos', else from best ports of
the specific cos.
Signed-off-by: Abdullah Sevincer <abdullah.sevincer@intel.com>
During cleanup `rte_event_port_quiesce` should be called
irrespective of whether an event has been dequeued or not
to flush any prefetched events.
Fixes: 7da008df0c ("app/eventdev: use port quiescing")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
The user has the right to supply pools with excessively large
buffers, regardless of the maximum supported Rx packet length
reported by the adapter. However, in this PMD, on EF10 boards,
a Rx descriptor has only 14 bits to specify the buffer length.
To avoid potential problems, use this information accordingly.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Such information is useful to client drivers which deal with
large Rx pool buffers (16-bit wide data count) and thus need
to avoid overflow when setting EF10's 14-bit wide data count.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Maximum data count of a Tx descriptor is advertised to users,
however, this value is mistakenly derived from the Rx define.
Use the Tx one instead. The resulting value will be the same.
Fixes: 1e43fe3cb4 ("net/sfc/base: separate limitations on Tx DMA descriptors")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
As rte_flow_action_handle_create/destroy/update() have their own
asynchronous rte_flow_async_action_handle_create/destroy/update()
version functions to accelerate the indirect action operations in
queue based flow engine. Currently, the asynchronous version query
function for indirect action was missing.
Add rte_flow_async_action_handle_query() function corresponding
to rte_flow_action_handle_query(). The new asynchronous version
function enables enqueue the query to the hardware similar as
asynchronous flow management does and returns immediately to free
the CPU for other tasks. Application can get the query results from
rte_flow_pull() when the hardware completes its work.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
In queue based async flow engine, in order to optimize the flow
insertion rate, PMD can use the hints from application to have
resources pre-allocate during initialization phase for actions
such as count/meter/aging.
This commit adds the connection tracking action hints.
Signed-off-by: Suanming Mou <suanmingm@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Applications may use rte_eth_rx_queue_count() in the Rx stage of the
dataplane, so only check the function parameters if built with
RTE_ETHDEV_DEBUG_RX.
Signed-off-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Ferruh Yigit <ferruh.yigit@xilinx.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Introduce GTP PSC QFI modify field and add testpmd CLI command support.
An example for copying GTP QFI field using modify_field action:
modify_field op set dst_type meta src_type gtp_psc_qfi width 8
An example of setting GTP QFI field value to 0x1f using modify_field
action:
modify_field op set dst_type gtp_psc_qfi src_type value src_value 1f
width 8
Signed-off-by: Dariusz Sosnowski <dsosnowski@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Saving the current segments of the packet, when the next segment data is
not ready.
Fixes: 965b3127d4 ("net/axgbe: support scattered Rx")
Cc: stable@dpdk.org
Signed-off-by: Bhagyada Modali <bhagyada.modali@amd.com>
Acked-by: Chandubabu Namburu <chandu@amd.com>
Reset the EOP in the failure scenario and also after the last segment.
Remove updating the packet length explicitly as it is done in chaining.
Fixes: 965b3127d4 ("net/axgbe: support scattered Rx")
Cc: stable@dpdk.org
Signed-off-by: Bhagyada Modali <bhagyada.modali@amd.com>
Acked-by: Chandubabu Namburu <chandu@amd.com>
Added changes to base rule install mechanism.
If action type is IPsec and multi channel is set,
then base rule will not be merged.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Satheesh Paul <psatheesh@marvell.com>
In vector mode, DF bit is not programmed correctly, as the
return value of vsetq_lane_u64() is ignored, which actually
contains the updated value, leading HW to free mbufs though
NIX_TX_OFFLOAD_MBUF_NOFF_F flag is set.
Hence, save return value of vsetq_lane_u64() appropriately so
that DF bit is programmed correctly.
Fixes: 862e281287 ("net/cnxk: add vector Tx for CN9K")
Fixes: f71b7dbbf0 ("net/cnxk: add vector Tx for CN10K")
Cc: stable@dpdk.org
Signed-off-by: Hanumanth Pothula <hpothula@marvell.com>
While configuring NIX, local variables 'nb_rxq' and 'nb_txq'
are declared as 8bit variables, leading to an integer overflow
when an application sends Rxq/Txq value greater than 255.
Hence, declare local variables, 'nb_rxq' and 'nb_txq' as 16bit
variable. Also, during the cleanup, make sure PFC tree is not created.
Fixes: b75e0aca84 ("net/cnxk: add device configuration operation")
Cc: stable@dpdk.org
Signed-off-by: Hanumanth Pothula <hpothula@marvell.com>
If the length of data_len in mbuf is less than 17 or
greater than the maximum frame size, it is illegal.
These illegal packets will lead to Tx/Rx hang and
can't recover automatically.
This patch check those illegal packets and protect
Tx/Rx from hanging.
Fixes: 17c7d0f9d6 ("net/ice: support basic Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If the length of data_len in mbuf is less than 17 or
greater than the maximum frame size, it is illegal.
These illegal packets will lead to Tx/Rx hang and
can't recover automatically.
This patch check those illegal packets and protect
Tx/Rx from hanging.
Fixes: a2b29a7733 ("net/avf: enable basic Rx Tx")
Cc: stable@dpdk.org
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If a meter's profile is changed after meter disabled, there's an issue
that will fail when deleting the old profile.
This patch fixes this by adding the correct process to decrease the old
profile's reference count when changing profile.
Fixes: 63ffeb2ff2 ("net/mlx5: support meter profile update")
Cc: stable@dpdk.org
Signed-off-by: Shun Hao <shunh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Currently, when flow usese meter hierarchy, a tag action is always applied
to set the first meter's meter id, so as to update the first meter's drop
count. But it's not considered if first meter doesn't have drop count.
This patch fixes it, that in hierarchy, if the first meter doesn't have
drop count, no need to add the meter id tag action. No change for
non-hierarchy meter.
Fixes: e8146c63 ("net/mlx5: support represented port item in flow rules")
Cc: stable@dpdk.org
Signed-off-by: Shun Hao <shunh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
If there's no param in represented_port item, it will be treated as
matching all ports by default. But there's some limitation when using it
with meter hierarchy.
This patch adds the limitation that when matching all ports, the meter
hierarchy should not contain any meter having drop count.
Fixes: e8146c63 ("net/mlx5: support represented port item in flow rules")
Cc: stable@dpdk.org
Signed-off-by: Shun Hao <shunh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
There is a new item type represented_port, and currently it will fail
when using meter hierarchy in flow using represented_port match.
This patch fixes this fail by adding support for represented_port item
in meter hierarchy flow split.
Fixes: e8146c63 ("net/mlx5: support represented port item in flow rules")
Cc: stable@dpdk.org
Signed-off-by: Shun Hao <shunh@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The driver splits the flow with sample action into two sub-flows,
sub prefix flow and sub suffix flow.
In the case of tunnel flow including a decap action, the driver should
translate the inner as outer for actions coming after the decap action.
In the case of flow splitting, the packet layers, used to detect the
attributes, are inherited from the prefix flow to the suffix flow but
the driver wrongly didn't handle the decap adjustment and the inner
layers didn't shift to the outer.
This patch adjusts the inherited layers in case of decap.
Fixes: 6e77151286 ("net/mlx5: fix match information in meter")
Cc: stable@dpdk.org
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
