Make is no longer supported for compiling DPDK, references are now
removed in the documentation.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Add fill operation enqueue support for IOAT and IDXD. The fill enqueue is
similar to the copy enqueue, but takes a 'pattern' rather than a source
address to transfer to the destination address. This patch also includes an
additional test case for the new operation type.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Devices managed by the idxd kernel driver must be configured for DPDK use
before it can be used by the ioat driver. This example script serves both
as a quick way to get the driver set up with a simple configuration, and as
the basis for users to modify it and create their own configuration
scripts.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
The Intel DSA devices can be exposed to userspace via kernel driver, so can
be used without having to bind them to vfio/uio. Therefore we add support
for using those kernel-configured devices as vdevs, taking as parameter the
individual HW work queue to be used by the vdev.
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Add in the basic probe/remove skeleton code for DSA devices which are bound
directly to vfio or uio driver. The kernel module for supporting these uses
the "idxd" name, so that name is used as function and file prefix to avoid
conflict with existing "ioat" prefixed functions.
Since we are adding new files to the driver and there will be common
definitions shared between the various files, we create a new internal
header file ioat_private.h to hold common macros and function prototypes.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Rather than having the fence signalled via a flag on a descriptor - which
requires reading the docs to find out whether the flag needs to go on the
last descriptor before, or the first descriptor after the fence - we can
instead add a separate fence API call. This becomes unambiguous to use,
since the fence call explicitly comes between two other enqueue calls. It
also allows more freedom of implementation in the driver code.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Since the hardware supported by the ioat driver is capable of operations
other than just copies, we can rename the doorbell and completion-return
functions to not have "copies" in their names. These functions are not
copy-specific, and so would apply for other operations which may be added
later to the driver.
Also add a suitable warning using deprecation attribute for any code using
the old functions names.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Add a flag which controls whether rte_ioat_enqueue_copy and
rte_ioat_completed_copies function should process handle parameters. Not
doing so can improve the performance when handle parameters are not
necessary.
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Add NTB device support (4th generation) for Intel Ice Lake platform.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Currently with the rawdev API there is no way to check that the structure
passed in via the dev_private pointer in the structure passed to configure
API is of the correct type - it's just checked that it is non-NULL. Adding
in the length of the expected structure provides a measure of typechecking,
and can also be used for ABI compatibility in future, since ABI changes
involving structs almost always involve a change in size.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
Currently with the rawdev API there is no way to check that the structure
passed in via the dev_private pointer in the dev_info structure is of the
correct type - it's just checked that it is non-NULL. Adding in the length
of the expected structure provides a measure of typechecking, and can also
be used for ABI compatibility in future, since ABI changes involving
structs almost always involve a change in size.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Nipun Gupta <nipun.gupta@nxp.com>
In prerequisites of ntb guide, the correct flag when loading igb_uio
module should be `wc_activate=1`, not `wc_active=1`.
Fixes: 11b5c7daf019 ("raw/ntb: add enqueue and dequeue functions")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add rawdev's selftest feature in SDP VF driver, which
verifies the EP mode functionality test.
Signed-off-by: Mahipal Challa <mchalla@marvell.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Register "dev_configure" API to configure/initialize the SDP
VF PCIe devices.
Signed-off-by: Mahipal Challa <mchalla@marvell.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Add the OCTEON TX2 SDP EP device probe along with the
build infrastructure for Make and meson builds.
Signed-off-by: Mahipal Challa <mchalla@marvell.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Align the description to what the code snippet shows.
Fixes: 0a92e63fc4cd ("raw/ioat: add local API to perform copies")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch bump the supported SDK and MC firmware version
to the latest.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
dpaa and dpaa2 config have evolved to be same. The same binary
can now work across the platforms. So, there is no need to maintain
two different build configs.
The dpaa config shall work for both generation of dpaa platforms.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Introduce enqueue and dequeue functions to support packet based
processing. And enable write-combining for ntb driver since it
can improve the performance a lot.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Setup and init NTB txq and rxq. And negotiate queue information
with the peer. If queue size and number of queues are not
consistent on both sides, return error.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The ifpga and skeleton rawdev drivers included "rawdev" in their directory
names, which was superfluous given that they were in the drivers/raw
directory. Shorten the names via this patch.
For meson builds, this will rename the final library .so/.a files
produced, but those will be renamed again later via a patch to
standardize rawdev names.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Add handshake process using doorbell so that two hosts can
communicate to start and stop.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add in the list of registers for the device.
And enable NTB device ops for Intel Skylake platform.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Introduce rawdev driver support for NTB (Non-transparent Bridge) which
can help to connect two separate hosts with each other.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Update the devbind script with new section of DMA devices, also
added OCTEONTX2 DMA device ID to DMA device list
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Sample test to verify DMA functionality, this test covers
internal transfer mode.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Register dev_configure API to configure DPI PCI devices.
After successful initialization send message to PF to open
corresponding DPI DMA queue. At present hardware doesn't
support mail box for DPI, so PMD to PF communication uses
pre build kernel devfs.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Add the make and meson based build infrastructure along
with the DMA device probe with documentation infrastructure.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Add local APIs to trigger data copies, and retrieve handle values once
those copies are completed. Included are unit tests to validate the data
is copies correctly.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Add stats functions to track what is happening in the driver, and put
unit tests to check those.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Allow initializing a driver instance. Include selftest to validate these
functions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Add in the "info_get" function to the driver, to allow us to query the
device. This allows us to have the unit test pick up the presence of
supported hardware or not.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Add the create/destroy driver functions so that we can actually allocate
a rawdev and destroy it when done. No rawdev API functions are actually
implemented at this point.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
In order to allow binding/unbinding of devices for use by the
ioat_rawdev, we need to update the devbind script to add a new class
of device, and add device ids for the specific HW instances.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Add stubs for ioat rawdev driver support in DPDK, specifically:
* makefile and meson build hooks
* initial public header file
* rawdev main C file, with probe and release functions
* release note update announcing the driver
* initial documentation for the new section in the rawdev doc
* unit test stubs for device unit tests
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Rather than using linuxapp and bsdapp everywhere, we can change things to
use the, more readable, terms "linux" and "freebsd" in our build configs.
Rather than renaming the configs we can just duplicate the existing ones
with the new names using symlinks, and use the new names exclusively
internally. ["make showconfigs" also only shows the new names to keep the
list short] The result is that backward compatibility is kept fully but any
new builds or development can be done using the newer names, i.e. both
"make config T=x86_64-native-linuxapp-gcc" and "T=x86_64-native-linux-gcc"
work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
