MLX5 PMD can match on integrity bits for inner and outer headers in
a single flow.
That means a single flow rule can reference both inner and outer
integrity bits. That is implemented by adding 2 flow integrity items
to a rule - one item for outer integrity bits and other for
inner integrity bits.
Integrity item `level` parameter specifies what part is being
targeted.
Current PMD treated integrity items for outer and inner headers as
the same.
The patch separates PMD verifications for inner and outer integrity
items.
Fixes: 79f8952783 ("net/mlx5: support integrity flow item")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Multiple rules could use the same encap_decap/modify_hdr/counter action.
The flow dump data could be duplicated.
To avoid redundancy, flow dump value is based on the actions' pointer
instead of previous rules' pointer.
For counter, the data is stored in cmng of priv->sh.
For encap_decap/modify_hdr, the data stored in encaps_decaps/modify_cmds.
Traverse the fields and get action's pointer and information.
Formats are same for information in the dump except "id" stands for
actions' pointer:
Counter: rec_type,id,hits,bytes
Modify_hdr: rec_type,id,actions_number,actions
Encap_decap: rec_type,id,buf
Signed-off-by: Haifei Luo <haifeil@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
During the device spawn process, mlx5 PMD queried the available flow
priorities by calling mlx5_flow_discover_priorities, queried
if the DR drop action was supported on the root table by calling
the mlx5_flow_discover_dr_action_support routine, and queried the
availability of metadata register C by calling mlx5_flow_discover_mreg_c
These functions created the test flows to get the supported fields, and
at the end destroyed the test flows. The test flows in the first two
functions was created on the root table.
If the device was spawned with multiple representors, these test flows
were created and destroyed on each representor as well. The above
operations took a significant amount of init time during the device
spawn.
This patch optimizes the device discover functions, if there is
the device with multiple representors (VF/SF) being spawned,
the priority and drop action and metadata register support check can be
done only ones and check results can be shared for all representors.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Remove debug log inside of mlx5_list_init to avoid flooding debug
messages when creating hash list with large actual size.
Fixes: 9c373c524b ("common/mlx5: move list utility from net driver")
Cc: stable@dpdk.org
Signed-off-by: Sean Zhang <xiazhang@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
In socket direct mode, it's possible to bind any two (maybe four
in future) PCIe devices with IDs like xxxx:xx:xx.x and
yyyy:yy:yy.y. Bonding member interfaces are unnecessary to have
the same PCIe domain/bus/device ID anymore,
Kernel driver uses "system_image_guid" to identify if devices can
be bound together or not. Sysfs "phys_switch_id" is used to get
"system_image_guid" of each network interface.
OFED 5.4+ is required to support "phys_switch_id".
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
sysfs entry "phys_switch_id" holds each PCIe device'
guid.
The devices which reside in the same physical NIC should
have the same guid.
Signed-off-by: Rongwei Liu <rongweil@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The shared pointer is initialized to a static local array defined in the
primary process and it shall not be accessed in the secondary process.
This patch copies the local data to shared data, to avoid data access
violation.
Fixes: 040b44551f ("net/iavf: unify Rx packet type table")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch uses the index value to call the function, instead of the
function pointer assignment to save the selection of Receive Flex
Descriptor profile ID.
Otherwise the secondary process will run with wrong function address
from primary process.
Fixes: 7a340b0b4e ("net/ice: refactor Rx FlexiMD handling")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
After DCF is reset by PF, the DCF device un-initialization cannot
function normally, ignore the failure does not help since the kernel
does not clean up resource.
The patch workaround the issue by triggering an additional DCF enable/
disable cycle when a passive reset is detected.
Fixes: 1a86f4dbdf ("net/ice: support DCF device reset")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Warning continuously is a pain when developping or if a unit test
is/gets broken.
It could also be a problem if application behaves badly only in some
corner cases and a DoS results of those logs being continuously displayed.
Let's warn once per port and per rx/tx.
Getting such a log is scary, but let's make it more eye catching by
dumping a backtrace with it.
Tested by introducing a bug in testpmd:
static int
eth_dev_start_mp(uint16_t port_id)
{
- if (is_proc_primary())
+ if (!is_proc_primary())
return rte_eth_dev_start(port_id);
return 0;
Then, running a basic null test:
$ ./devtools/test-null.sh
...
Start automatic packet forwarding
io packet forwarding - ports=2 - cores=1 - streams=2 - NUMA support
enabled, MP allocation mode: native
Logical Core 1 (socket 0) forwards packets on 2 streams:
RX P=0/Q=0 (socket 0) -> TX P=1/Q=0 (socket 0) peer=02:00:00:00:00:01
RX P=1/Q=0 (socket 0) -> TX P=0/Q=0 (socket 0) peer=02:00:00:00:00:00
lcore 0 called rx_pkt_burst for not ready port 0
8: [build/app/dpdk-testpmd() [0x59e839]]
7: [/lib64/libc.so.6(__libc_start_main+0xf5) [0x7ff481b69555]]
6: [build/app/dpdk-testpmd(main+0x54b) [0x662d24]]
5: [build/app/dpdk-testpmd(start_packet_forwarding+0x263) [0x65e795]]
4: [build/app/dpdk-testpmd() [0x65e1be]]
3: [build/app/dpdk-testpmd() [0x65a996]]
2: [build/app/dpdk-testpmd() [0xa6cbc7]]
1: [build/app/dpdk-testpmd(rte_dump_stack+0x27) [0xaee796]]
lcore 0 called rx_pkt_burst for not ready port 1
8: [build/app/dpdk-testpmd() [0x59e839]]
7: [/lib64/libc.so.6(__libc_start_main+0xf5) [0x7ff481b69555]]
6: [build/app/dpdk-testpmd(main+0x54b) [0x662d24]]
5: [build/app/dpdk-testpmd(start_packet_forwarding+0x263) [0x65e795]]
4: [build/app/dpdk-testpmd() [0x65e1be]]
3: [build/app/dpdk-testpmd() [0x65a996]]
2: [build/app/dpdk-testpmd() [0xa6cbc7]]
1: [build/app/dpdk-testpmd(rte_dump_stack+0x27) [0xaee796]]
io packet forwarding packets/burst=32
nb forwarding cores=1 - nb forwarding ports=2
port 0: RX queue number: 1 Tx queue number: 1
Rx offloads=0x0 Tx offloads=0x0
Fixes: c87d435a4d ("ethdev: copy fast-path API into separate structure")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Driver is using 'ETH_FRAME_LEN' Linux defined value as max frame length,
which doesn't include FCS (4 bytes CRC). But ethdev by default uses
frame size with FCS when application doesn't define any explicit value.
As a result device configuration fails because device is tried to be
configured with a frame size length that is bigger than what device
reported as supported. Device reports as max supported frame size is
1514 but configured value is 1518.
Instead use DPDK macro, 'RTE_ETHER_MAX_LEN', that includes FCS in the
driver to report the max supported frame size, this matches to the
initial intention.
Fixes: 1bb4a528c4 ("ethdev: fix max Rx packet length")
Reported-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Driver is using 'ETH_FRAME_LEN' Linux defined value as max frame length,
which doesn't include FCS (4 bytes CRC). But ethdev by default uses
frame size with FCS when application doesn't define any explicit value.
As a result device configuration fails because device is tried to be
configured with a frame size length that is bigger than what device
reported as supported. Device reports as max supported frame size is
1514 but configured value is 1518.
Instead use DPDK macro, 'RTE_ETHER_MAX_LEN', that includes FCS in the
driver to report the max supported frame size, this matches to the
initial intention.
Fixes: 1bb4a528c4 ("ethdev: fix max Rx packet length")
Reported-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Since its introduction in 2018, the SIGBUS handler was never registered,
and all related functions were unused.
A SIGBUS can be received by the application when accessing to hugepages
even if mmap() was successful, This happens especially when running
inside containers when there is not enough hugepages. In this case, we
need to recover. A similar scheme can be found in eal_memory.c.
Fixes: 582bed1e1d ("mem: support mapping hugepages at runtime")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: David Marchand <david.marchand@redhat.com>
When using rte_malloc() from a thread which is not bound to a numa
socket (the typical case is a control thread, but it can also happen
on a dataplane thread if its cpu affinity is on cores attached to
several sockets), the used heap is the one from numa socket 0, which
may not have available memory.
Fix this by selecting the first socket which has available memory.
Note: malloc_get_numa_socket() is only used from one .c file, so move
it there, and remove the inline keyword.
Fixes: b94580d688 ("malloc: avoid unknown socket id")
Cc: stable@dpdk.org
Signed-off-by: Ilyes Ben Hamouda <ilyes.ben_hamouda@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: David Marchand <david.marchand@redhat.com>
If the user requests to use an lcore above 128 using -l,
the eal will exit with "EAL: invalid core list syntax" and
very little else useful information.
This patch adds some extra information suggesting to use --lcores
so that physical cores above RTE_MAX_LCORE (default 128) can be
used. This is achieved by using the --lcores option by mapping
the logical cores in the application to physical cores.
For example, if "-l 12-16,130,132" is used, we see the following
additional output on the command line:
EAL: lcore 132 >= RTE_MAX_LCORE (128)
EAL: lcore 133 >= RTE_MAX_LCORE (128)
EAL: To use high physical core ids, please use --lcores to map them
to lcore ids below RTE_MAX_LCORE,
EAL: e.g. --lcores 0@12,1@13,2@14,3@15,4@16,5@132,6@133
The same is added to -c option parsing.
For example, if "-c 0x300000000000000000000000000000000" is
used, we see the following additional output on the command line:
EAL: lcore 128 >= RTE_MAX_LCORE (128)
EAL: lcore 129 >= RTE_MAX_LCORE (128)
EAL: To use high physical core ids, please use --lcores to map them
to lcore ids below RTE_MAX_LCORE,
EAL: e.g. --lcores 0@128,1@129
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add optional destination ports parameter for port-id action.
The parameter is not must, and the value is 1 by default as before
if the parameter not provided.
For example:
$ dpdk-test-flow-perf -w 08:00.0,representor=[0,1] -- --transfer \
--ingress --transfer --ether --portmask=0x2 --vxlan-encap \
--port-id=0
This command means the rule created on representor 0 with port 0
as destination, since the portmask is 0x2 and dst-ports is 0:
$ dpdk-test-flow-perf -w 08:00.0,representor=[0,1] \
-w 08:00.1,representor=[0,1]-- --transfer --ingress --transfer \
--ether --portmask=0x12 --vxlan-encap --port-id=0,3
This command means the rules created on both representor 0 of PF 0
and PF 1, the destination port for the first representor is PF 0,
and the destination port for the other one is PF 1.
Signed-off-by: Sean Zhang <xiazhang@nvidia.com>
Reviewed-by: Wisam Jaddo <wisamm@nvidia.com>
This API has been around for more than a year (and is in LTS 20.11).
It did not receive negative feedback and will be used in a next OVS
release.
Mark it stable.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
rte_bpf_convert() implementation depends on libpcap.
Right now it is defined only when this library is installed and
RTE_PORT_PCAP is defined.
Fix that by providing for such case stub rte_bpf_convert()
implementation that will always return an error.
To draw user attention, if proper implementation is disabled,
warning will be thrown at meson configure stage.
Also move stub for another function (rte_bpf_elf_load) into
the same place (bpf_stub.c).
Fixes: 2eccf6afbe ("bpf: add function to convert classic BPF to DPDK BPF")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Fix typo in doxygen comments for rte_bpf_convert().
Fixes: 2eccf6afbe ("bpf: add function to convert classic BPF to DPDK BPF")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
A previous change blamed it on compiler/ASan, while this is a real
(yet minor) issue.
This return -EINVAL is never reached since we test all combinations of
fidx and fcin booleans.
All branches end up with a return 0, factorize them.
Fixes: 84f5ac9418 ("pipeline: fix build with ASan")
Fixes: f38913b7fb ("pipeline: add meter array to SWX")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Adding the PIE support for IP Pipeline
Signed-off-by: Wojciech Liguzinski <wojciechx.liguzinski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
patch add support enable PIE or RED by
parsing config file.
Signed-off-by: Wojciech Liguzinski <wojciechx.liguzinski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
Implement PIE based congestion management based on rfc8033.
The Proportional Integral Controller Enhanced (PIE) algorithm works
by proactively dropping packets randomly.
PIE is implemented as more advanced queue management is required to
address the bufferbloat problem and provide desirable quality of
service to users.
Tests for PIE code added to test application.
Added PIE related information to documentation.
Signed-off-by: Wojciech Liguzinski <wojciechx.liguzinski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
The device event interrupt handler was always freed.
Bugzilla ID: 845
Fixes: c2bd9367e1 ("lib: remove direct access to interrupt handle")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Yan Xia <yanx.xia@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Caught with ASan:
==9727==ERROR: AddressSanitizer: stack-buffer-overflow on address
0x7f0daa2fc0d0 at pc 0x7f0daeefacb2 bp 0x7f0daa2fadd0 sp 0x7f0daa2fa578
READ of size 1 at 0x7f0daa2fc0d0 thread T1
#0 0x7f0daeefacb1 (/lib64/libasan.so.5+0xbacb1)
#1 0x115eba1 in dev_uev_parse ../lib/eal/linux/eal_dev.c:167
#2 0x115f281 in dev_uev_handler ../lib/eal/linux/eal_dev.c:248
#3 0x1169b91 in eal_intr_process_interrupts
../lib/eal/linux/eal_interrupts.c:1026
#4 0x116a3a2 in eal_intr_handle_interrupts
../lib/eal/linux/eal_interrupts.c:1100
#5 0x116a7f0 in eal_intr_thread_main
../lib/eal/linux/eal_interrupts.c:1172
#6 0x112640a in ctrl_thread_init
../lib/eal/common/eal_common_thread.c:202
#7 0x7f0dade27159 in start_thread (/lib64/libpthread.so.0+0x8159)
#8 0x7f0dadb58f72 in clone (/lib64/libc.so.6+0xfcf72)
Address 0x7f0daa2fc0d0 is located in stack of thread T1 at offset 4192
in frame
#0 0x115f0c9 in dev_uev_handler ../lib/eal/linux/eal_dev.c:226
This frame has 2 object(s):
[32, 48) 'uevent'
[96, 4192) 'buf' <== Memory access at offset 4192 overflows this
variable
HINT: this may be a false positive if your program uses some custom
stack unwind mechanism or swapcontext
(longjmp and C++ exceptions *are* supported)
Thread T1 created by T0 here:
#0 0x7f0daee92ea3 in __interceptor_pthread_create
(/lib64/libasan.so.5+0x52ea3)
#1 0x1126542 in rte_ctrl_thread_create
../lib/eal/common/eal_common_thread.c:228
#2 0x116a8b5 in rte_eal_intr_init
../lib/eal/linux/eal_interrupts.c:1200
#3 0x1159dd1 in rte_eal_init ../lib/eal/linux/eal.c:1044
#4 0x7a22f8 in main ../app/test-pmd/testpmd.c:4105
#5 0x7f0dada7f802 in __libc_start_main (/lib64/libc.so.6+0x23802)
Bugzilla ID: 792
Fixes: 0d0f478d04 ("eal/linux: add uevent parse and process")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Yan Xia <yanx.xia@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
clang-13 rightfully complains that the total_mem variable in
eal_parse_socket_arg is set but not used, since the final
accumulated total_mem result isn't used anywhere.
So just remove the total_mem variable.
Fixes: 0a703f0f36 ("eal/linux: fix parsing zero socket memory and limits")
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
This patch adds a new parameter to the FIB configuration to specify
the size of the extension for internal RIB structure.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Tested-by: Conor Walsh <conor.walsh@intel.com>
Devargs used in device iterator initialization wasn't set to zero, random
data like bus string lead to invalid address access.
This patch initializes devargs.
Bugzilla ID: 862
Fixes: c99a2d4c6b ("eal: implement device iteration initialization")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
This patch fixes use after free in thash library, reported by ASAN.
Bugzilla ID: 868
Fixes: 28ebff11c2 ("hash: add predictable RSS")
Cc: stable@dpdk.org
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Seen by ASan.
In the external buffer mbuf test, we check that the buffer is freed
by checking that its refcount is 0.
This is not a valid condition, because it accesses to an already
freed area.
Fix this by setting a boolean flag in the callback when rte_free()
is actually called, and check this flag instead.
Bugzilla ID: 867
Fixes: 7b295dceea ("test/mbuf: add unit test cases")
Cc: stable@dpdk.org
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
This patch adds performance tests for the following Toeplitz hash
function implementations:
Scalar:
- rte_softrss()
- rte_softrss_be()
Vector using gfni:
- rte_thash_gfni()
- rte_thash_gfni_bulk()
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
This patch enables new GFNI Toeplitz hash in
predictable RSS library.
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds a bulk version for the Toeplitz hash implemented
with Galios Fields New Instructions (GFNI).
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch add a new Toeplitz hash implementation using
Galios Fields New Instructions (GFNI).
Signed-off-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The POWER meson.build file incorrectly checks if the detected CPU is
"greater than" POWER8 when it should actually test for "greater than or
equal to" POWER8. Fixed the comparison operator.
Bugzilla ID: 875
Fixes: 7501968808 ("config/ppc: select instruction set for IBM Power10")
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
When mlx5_regex_qp_setup() is called, make sure
the provided QP is not already setup.
Signed-off-by: Ady Agbarih <adypodoman@gmail.com>
Acked-by: Ori Kam <orika@nvidia.com>
The mlx5_rxp_csrs.h file has been deprecated as
its contents has now been moved to FW.
Signed-off-by: Francis Kelly <fkelly@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Add patch for programming the regex database through ROF file,
using the firmware instead of manually through the software.
No need to setup the DB anymore, the regex-daemon is responsible
for that always.
In the new flow the regex driver only has to program ROF rules
by using set params DevX cmd, requires ROF mkey creation.
The rules file has to be read into 4KB aligned memory.
Signed-off-by: Ady Agbarih <adypodoman@gmail.com>
Acked-by: Ori Kam <orika@nvidia.com>
Remove the set/query regexp register commands from DevX.
Remove functions that used these commands.
Remove manual rules programming.
Signed-off-by: Ady Agbarih <adypodoman@gmail.com>
Acked-by: Ori Kam <orika@nvidia.com>
This patch modifies the SET_REGEXP_PARAMS DevX command as follows:
Remove DB setup DevX command. The command is no longer needed
in DPDK, it will always be invoked by the regex-daemon.
Add new DevX command, for programming ROF rules for a specific engine.
The command takes as an input an mkey of the ROF.
It also introduces a new field_select bit.
Signed-off-by: Ady Agbarih <adypodoman@gmail.com>
Acked-by: Ori Kam <orika@nvidia.com>
When stopping the device we should release all
data allocated.
After rte_regexdev_configure(), the QPs are pre-allocated,
and will be configured only in rte_regexdev_queue_pair_setup().
That's why the QP jobs array initialization is checked
before attempting to destroy the QP.
Signed-off-by: Ori Kam <orika@nvidia.com>
Signed-off-by: Ady Agbarih <adypodoman@gmail.com>
Update PRM hca capabilities definitions as follows:
regexp_version field added - specifies whether BF2 or BF3
regexp field removed
regexp_params field moved
regexp_log_crspace_size field removed
regexp_mmo added - specifies if using regex mmo wqe is supported
Allow regex only if both regexp_params and regexp_mmo are set,
instead of checking regexp_mmo only.
Check version through the new capability field regexp_version instead
of reading crspace register.
Signed-off-by: Ady Agbarih <adypodoman@gmail.com>
Acked-by: Ori Kam <orika@nvidia.com>
Amount of locked memory for regular users is limited,
it is usually 64 KB by default.
Hitting this limit in rte_mempool_populate_anon()
resulted in not populating the mempool, and a test case failure:
EAL: Test assert test_mempool_events line 585 failed: Failed to populate mempool empty1: Success
test failed at test_mempool():1019
Test Failed
Decrease the amount of mapped anonymous memory to fit the limit.
While there, make all function-local constants lowercase.
Fixes: 11541c5c81 ("mempool: add non-IO flag")
Reported-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
FreeBSD EAL does not implement rte_mem_virt2iova() causing an error:
EAL: Test assert test_mempool_flag_non_io_unset_when_populated_with_valid_iova
line 781 failed: Cannot get IOVA
test failed at test_mempool():1030
Test Failed
Change unit test to use rte_memzone_reserve() to allocate memory,
which allows to obtain IOVA directly.
Bugzilla ID: 863
Fixes: 11541c5c81 ("mempool: add non-IO flag")
Reported-by: Yu Jiang <yux.jiang@intel.com>
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
FreeBSD EAL selected IOVA mode PA even in --no-huge mode
where PA are not available. Memory zones were created with IOVA
equal to RTE_BAD_IOVA with no indication this field is not usable.
Change IOVA mode detection:
1. Always allow to force --iova-mode=va.
2. In --no-huge mode, disallow forcing --iova-mode=pa, and select VA.
3. Otherwise select IOVA mode according to bus requests, default to PA.
In case contigmem is inaccessible, memory initialization will fail
with a message indicating the cause.
Fixes: c2361bab70 ("eal: compute IOVA mode based on PA availability")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Instead of polling for bufptr64 to be updated, use
wait until scheme for this case.
Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
