The function rte_eth_xstats_get() return an array of tuples (id,
value). The value is the statistic counter, while the id references a
name in the array returned by rte_eth_xstats_get_name().
Today, each 'id' returned by rte_eth_xstats_get() is equal to the index
in the returned array, making this value useless. It also prevents a
driver from having different indexes for names and value, like in the
example below:
rte_eth_xstats_get_name() returns:
0: "rx0_stat"
1: "rx1_stat"
2: ...
7: "rx7_stat"
8: "tx0_stat"
9: "tx1_stat"
...
15: "tx7_stat"
rte_eth_xstats_get() returns:
0: id=0, val=<stat> ("rx0_stat")
1: id=1, val=<stat> ("rx1_stat")
2: id=8, val=<stat> ("tx0_stat")
3: id=9, val=<stat> ("tx1_stat")
This patch fixes the drivers to set the 'id' in their ethdev->xstats_get()
(except e1000 which was already doing it), and fixes ethdev by not setting
the 'id' field to the index of the table for pmd-specific stats: instead,
they should just be shifted by the max number of generic statistics.
Fixes: bd6aa172cf ("ethdev: fetch extended statistics with integer ids")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This makes struct rte_eth_dev independent of struct rte_pci_device by
replacing it with a pointer to the generic struct rte_device.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Only the drivers itself can decide if it could fill PCI information fields
of dev_info.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Add a new macro RTE_PMD_REGISTER_KMOD_DEP() that allows a driver to
declare the list of kernel modules required to run properly.
Today, most PCI drivers require uio/vfio.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
- Fix to use bitmapped values in NVM configuration for speed capability
advertisement. This issue is specific to 25G NIC since it is capable
of 25G and 10G speeds.
- Update feature list.
Fixes: 64c239b7f8 ("net/qede: fix advertising link speed capability")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Using GCC_VERSION to check gcc version and decide whether to include
that compiler option.
Fixes: ecc7a5a27f ("net/qede/base: fix 32-bit build")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Fix to advertise device's link speed capability based on NVM
port configuration instead of returning driver supported speeds.
Fixes: 95e67b4795 ("net/qede: add 100G link speed capability")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
The QEDE PMD now uses unzipped firmware file eliminating the dependency
on zlib. Hence remove LDLIBS entry form the Makefile and enable qede
PMD by default.
Fixes: 6adac0bf30 ("qede: add missing external dependency and disable by default")
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
o Fix the fastpath status block index such that each queue pair shares
the same index value.
o Add ecore_vf_get_num_sbs() API that returns the number of status
blocks assigned by PF. Use that to decide how many VF queues can be
advertised. Additionally, restrict maximum number of VF queues to 16
for 100G VF case.
Fixes: 2ea6f76aff ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
This patch fixes the base driver version display.
The driver version notation is:
<Base-Version_PMD-Version>
Fixes: 2ea6f76aff ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
There is no need to poll for slowpath events for VF
device since the ramrod responses are received over
PF-VF backchannel synchronously. So the fix is to
restrict the slowpath polling for PF device only.
Fixes: 2af14ca79c ("net/qede: support 100G")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Add support to send PF FLR request to the management firmware to
bringup the device in clean slate. This cleanup is necessary
in some corner cases where the device would be left in a bad
state from its previous operations. The driver will send PF FLR
request before slowpath initialization.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
This patch contains few RSS related changes as follows:
o Fix inadvertent initializing of rss_params outside of the
if block in qed_update_vport() which could cause FW exception.
o Fix disabling of RSS when hash function is 0.
o Rename qede_config_rss() to qede_check_vport_rss_enable()
for better clarity.
o Avoid code duplication using a helper function
qede_init_rss_caps().
Fixes: 4c98f2768e ("net/qede: support RSS hash configuration")
Fixes: 2ea6f76aff ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
The device doesn't explicitly support enable/disable
of VLAN filtering. However, VLAN filtering takes effect
when a matching VLAN is configured. So in order to
support enable/disable of VLAN filtering, VLAN 0 is
added/removed respectively. A check is added to ensure that
the user removes all the configured VLANs before disabling
VLAN filtering.
Also VLAN offloads shall be enabled by default and
vlan_tci_outer is to set to 0 for Q-in-Q packets.
Fixes: 2ea6f76 ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
- fix to prevent duplicate VLAN filters
librte_ether does not keep track of VLAN filters
configured, so it becomes driver's responsibility to
keep track of it and prevent duplicate filter
programming. The fix is to use a singly linked
list for tracking the entries and there by prevent
duplicates.
- fix num vlan filters
Fix num vlan filter when filling Ethernet device information.
Fixes: 2ea6f76aff ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
This patch fixes the missing 100G link speed advertisement
when the 100G support was initially added.
Fixes: 2af14ca79c ("net/qede: support 100G")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Add support to allow MTU change on a deactivated vport in
the qede/base driver and the core driver shall utilize the same.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Some applications set port configuration params like promisc mode
before calling dev_start(). This config results in a firmware exception
since this operation internally translates to sending of VPORT-UPDATE
before VPORT-START ramrod which is considered illegal from firmware
standpoint. So the fix is to send VPORT-START ramrod sooner
in dev_configure() rather than deferring it to dev_start().
This requires a bit of reshuffling in the code to move sending of
VPORT-START from qede_start_queues() to qede_dev_configure()
and VPORT-STOP from qede_stop_queues() to qede_dev_stop().
This sequence change also exposes a flaw in the port restart
flows where the fastpath resource allocation routine qede_init_fp()
functionalities need to be split, so that appropriate action is taken
based on the current port state. Eg: Do not re-initialize the status
block in a port restart case. This change ensures port start/stop
can be paired.
A new port state QEDE_DEV_CONFIG is added to distinguish between
port started from scratch vs port requiring a reconfig (like MTU).
The function qede_config_rx_mode() is removed since the individual
port config will be replayed anyways on a restart.
Fixes: 2ea6f76aff ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Previous release of the qede PMD had a limitation that the
driver expects the number of tx and rx queues to be the same.
This patch fixes this issue by making appropriate changes in
control and data path.
Fixes: 2ea6f76aff ("qede: add core driver")
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
This patch updates the base driver and incorporates necessary changes
required to bring in the new firmware 8.10.9.0.
In addition, it would allow driver to add new functionalities that might
be needed in future.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
This patch adds API support for NIC selftests (BIST) and APIs to retrieve
GPIO info, sensor data like temperature, MBA versions, ECC events etc.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Add ecore_mcp_mb_lock() and ecore_mcp_mb_unlock() APIs to ensure
a single thread is accessing MFW mailbox.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Change ecore_mcp_cmd_and_union() to accept pointer to a structure rather
than accepting multiple arguments. A new struct ecore_mcp_mb_params is
added for that purpose. Also make this function static. This change is
mostly keeping in mind the future requests which needs additional
arguments.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Change details:
- adds new comments
- modifies some of the existing comments
- abstract code into macros
- split long lines
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
In case of attention from a signal that's represented by multiple bits
in misc AEU, add the format string which is populated with proper index
and resulting prints will show string as a prefix.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
- add the hardware software interface(HSI) changes
- add register definitions
These will be required for 8.10.9.0 FW upgrade.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Replaced CONFIG_QED_BINARY_FW with CONFIG_ECORE_BINARY_FW.
Use CONFIG_ECORE_BINARY_FW and CONFIG_ECORE_ZIPPED_FW defines as
required.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Added ecore_hsi_debug_tools.h, ecore_hsi_init_func.h,
ecore_hsi_init_tool.h files. Rearranged code from ecore_hsi_common.h and
ecore_hsi_tools.h to the new files. Removed unused code.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
All macros related to driver registeration renamed from DRIVER_*
to RTE_PMD_*
This includes:
DRIVER_REGISTER_PCI -> RTE_PMD_REGISTER_PCI
DRIVER_REGISTER_PCI_TABLE -> RTE_PMD_REGISTER_PCI_TABLE
DRIVER_REGISTER_VDEV -> RTE_PMD_REGISTER_VDEV
DRIVER_REGISTER_PARAM_STRING -> RTE_PMD_REGISTER_PARAM_STRING
DRIVER_EXPORT_* -> RTE_PMD_EXPORT_*
Fix PMDINFOGEN tool to look for matches of RTE_PMD_REGISTER_*.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Remove the 'name' member from rte_pci_driver and move to generic
rte_driver.
Most of the PMD drivers were initially using DRIVER_REGISTER_PCI(<name>..)
as well as assigning a name to eth_driver.pci_drv.name member.
In this patch, only the original DRIVER_REGISTER_PCI(<name>..) name has
been populated into the rte_driver.name member - assignments through
eth_driver has been removed.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
[Shreyansh: Rebase and expand changes to newly added files]
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Simplify crypto and ethdev pci drivers init by using newly introduced
init macros and helpers.
Those drivers then don't need to register as "rte_driver"s anymore.
Exceptions:
- virtio and mlx* use RTE_INIT directly as they have custom initialization
steps.
- VDEV devices are not modified - they continue to use PMD_REGISTER_DRIVER.
Update documentation for replacing an example referring to
PMD_REGISTER_DRIVER.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
As discussed in the past release, driver names are modified
to be more consistent, and the future driver should follow
this new convention.
Driver names consist of:
"driver category"_"driver folder name"_"optional extra name".
For example:
- Crypto null driver -> "crypto_null"
- Network IXGBE VF driver -> "net_ixgbe_vf"
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch adds support for extended statistics for QEDE PMD.
Signed-off-by: Rasesh Mody <rasesh.mody@qlogic.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Modify the PMD_REGISTER_DRIVER macro, adding a name argument to it. The
addition of a name argument creates a token that can be used for subsequent
macros in the creation of unique symbol names to export additional bits of
information for use by the pmdinfogen tool. For example:
PMD_REGISTER_DRIVER(ena_driver, ena);
registers the ena_driver struct as it always did, and creates a symbol
const char this_pmd_name0[] __attribute__((used)) = "ena";
which pmdinfogen can search for and extract. The subsequent macro
DRIVER_REGISTER_PCI_TABLE(ena, ena_pci_id_map);
creates a symbol const char ena_pci_tbl_export[] __attribute__((used)) =
"ena_pci_id_map";
Which allows pmdinfogen to find the pci table of this driver
Using this pattern, we can export arbitrary bits of information.
pmdinfo uses this information to extract hardware support from an object
file and create a json string to make hardware support info discoverable
later.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Remy Horton <remy.horton@intel.com>
The mempool_count and mempool_free_count behaved contrary to what their
names suggested. The free_count function actually returned the number of
elements that were allocated from the pool, not the number unallocated as
the name implied.
Fix this by introducing two new functions to replace the old ones,
* rte_mempool_avail_count to replace rte_mempool_count
* rte_mempool_in_use_count to replace rte_mempool_free_count
In this patch, the new functions are added, and the old ones are marked
as deprecated. All apps and examples that use the old functions are
updated to use the new functions.
Fixes: af75078fec ("first public release")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This patch enables VF to VF traffic with unmatched destination addresses.
The steps to enable this are:
- Enable promiscuous mode filter settings.
- Check for VF mode and enable promiscuous mode settings for VF.
- Check filter configuration to ensure conflicting filter modes
are not set.
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
- Add device id to the PCI table
- Add polling for the slowpath events for CMT mode device
- Add prerequisites to allow 100g mode
* Min number of queues needed is 2
* Only even number of queues are allowed
- Update documentation
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
