Handle VXLAN and GENEVE TSO on EF10 native Tx datapath.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Said message cannot be considered as warning since
the PMD anyway reports available offload capabilities
by means of device info interface. Make this log
message informational and improve its formatting
by placing the text itself on the same line.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
As a result, code duplication will be avoided in the current
TSO implementations (EFX and EF10 native). The future patch to
add support for tunnel TSO will also reuse the new function.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Make Tx prepare function able to detect packets with invalid header
size when header linearization is required.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add descriptor space check to Tx prepare function to inform a caller
that a packet that needs more than maximum Tx descriptors of a queue
can not be sent.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tx offloads checks should be done in Tx prepare.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implement tx_prepare callback. The implementation checks for anything
only in RTE debug mode. No checks are done otherwise because EF10
simple datapath ignores Tx offloads.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implement tx_prepare callback and update Tx burst function accordingly.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Implement generic checks in Tx prepare function and update Tx burst
function accordingly.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Numbers of extra descriptors required for TSO are EF10-specific
in fact. Highlight it in define names.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Move the check inside xmit function to the branch in which
the check is mandatory. It makes case when TSO header is not
fragmented a bit more faster.
Fixes: 6bc985e411 ("net/sfc: support TSO in EF10 Tx datapath")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Move the check inside xmit function to the branch in which
the check is mandatory. It makes case when TSO header is not
fragmented a bit more faster.
Fixes: fec33d5bb3 ("net/sfc: support firmware-assisted TSO")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The API that was defined in OFED 4.5 was replaced both in OFED 4.6 and
in upstream.
This commit updates the API to match the upstream one.
Fixes: f5bf91de73 ("net/mlx5: support flow counters using devx")
Cc: stable@dpdk.org
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Iterating over siblings was done with RTE_ETH_FOREACH_DEV()
which skips the owned ports.
The new iterators RTE_ETH_FOREACH_DEV_SIBLING()
and RTE_ETH_FOREACH_DEV_OF() are more appropriate and more correct.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The Memory Region (MR) for DMA memory can't be created from secondary
process due to lib/driver limitation. Whenever it is needed, secondary
process can make a request to primary process through the EAL IPC
channel (rte_mp_msg) which is established on initialization. Once a MR
is created by primary process, it is immediately visible to secondary
process because the MR list is global per a device. Thus, secondary
process can look up the list after the request is successfully returned.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
A new PMD parameter (mr_ext_memseg_en) is added to control extension of
memseg when creating a MR. It is enabled by default.
If enabled, mlx4_mr_create() tries to maximize the range of MR
registration so that the LKey lookup tables on datapath become smalle
and get the best performance. However, it may worsen memory utilization
because registered memory is pinned by kernel driver. Even if a page in
the extended chunk is freed, that doesn't become reusable until the
entire memory is freed and the MR is destroyed.
To make freed pages available immediately, this parameter has to be
turned off but it could drop performance.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The Memory Region (MR) for DMA memory can't be created from secondary
process due to lib/driver limitation. Whenever it is needed, secondary
process can make a request to primary process through the EAL IPC
channel (rte_mp_msg) which is established on initialization. Once a MR
is created by primary process, it is immediately visible to secondary
process because the MR list is global per a device. Thus, secondary
process can look up the list after the request is successfully returned.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
A new PMD parameter (mr_ext_memseg_en) is added to control extension of
memseg when creating a MR. It is enabled by default.
If enabled, mlx5_mr_create() tries to maximize the range of MR
registration so that the LKey lookup tables on datapath become smaller
and get the best performance. However, it may worsen memory utilization
because registered memory is pinned by kernel driver. Even if a page in
the extended chunk is freed, that doesn't become reusable until the
entire memory is freed and the MR is destroyed.
To make freed pages available immediately, this parameter has to be
turned off but it could drop performance.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Secondary process is not allowed to register MR due to a restriction of
library and kernel driver.
Fixes: 7e43a32ee0 ("net/mlx5: support externally allocated static memory")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
In order to support secondary process, a few features are required.
a) rdma-core library should allocate device resources using DPDK's
memory allocator.
b) UAR should be remapped for secondary processes. Currently, in order
not to use different data structure for secondary processes, PMD
tries to reserve identical virtual address space for both primary
and secondary processes.
c) IPC channel is necessary, which can be easily set with rte_mp APIs.
Through the channel, Verbs command FD is delivered to the secondary
process and the device stop/start event is also broadcast from
primary process.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
To support secondary process, the memory allocated by library such as
completion rings (CQ) and buffer rings (WQ) must be manageable by EAL,
in order to share it with secondary processes. With new changes in
rdma-core and kernel driver, it is possible to provide an external
allocator to the library layer for this purpose. All such resources
will now be allocated within DPDK framework.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
rte_eth_devices[] is not shared between primary and secondary process,
but a static array to each process. The reverse pointer of device
(priv->dev) becomes invalid if mlx4 supports secondary process.
Instead, priv has the pointer to shared data of the device,
struct rte_eth_dev_data *dev_data;
Two macros are added,
#define PORT_ID(priv) ((priv)->dev_data->port_id)
#define ETH_DEV(priv) (&rte_eth_devices[PORT_ID(priv)])
Cc: stable@dpdk.org
Suggested-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Rx/Tx burst function pointers are stored in the rte_eth_dev structure,
which is local to a process. Even though primary process replaces the
function pointers, secondary will not run the new ones. With rte_mp
APIs, primary can easily broadcast a request to stop/start the datapath
of secondary processes.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
There's more need to have PMD global data structure. This should be
initialized once per a process regardless of how many PMD instances are
probed. mlx5_init_once() is called during probing and make sure all the
init functions are called once per a process. Currently, such global
data and its initialization functions are even scattered. Rather than
'extern'-ing such variables and calling such functions one by one making
sure it is called only once by checking the validity of such variables, it
will be better to have a global storage to hold such data and a
consolidated function having all the initializations. The existing shared
memory gets more extensively used for this purpose. As there could be
multiple secondary processes, a static storage (local to process) is also
added.
As the reserved virtual address for UAR remap is a PMD global resource,
this doesn't need to be stored in the device priv structure, but in the
PMD global data.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Socket API is used for IPC in order for secondary process to acquire
Verb command file descriptor. The FD is used to remap UAR address.
The multi-process APIs (rte_mp) in EAL are newly introduced.
mlx5_socket.c is replaced with mlx5_mp.c, which uses the new APIs.
As it is PMD global infrastructure, only one IPC channel is established.
All the IPC message types may have port_id in the message if there is
need to reference a specific device.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
As the memory event is propagated to secondary processes, the event is
processed redundantly. This should be processed once because the data
structure used for MR and the event is global across the processes.
Fixes: 974f1e7ef1 ("net/mlx5: add new memory region support")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
When replenishing mbufs on Rx, buffer address (mbuf->buf_addr) should be
loaded. non-x86 processors (mostly RISC such as ARM and Power) are more
vulnerable to load stall. For x86, reducing the number of instructions
seems to matter most.
For x86, this is simply a load but for other architectures, it is
calculated from the address of mbuf structure by rte_mbuf_buf_addr()
without having to load the first cacheline of the mbuf.
Fixes: 12d468a62b ("net/mlx5: fix instruction hotspot on replenishing Rx buffer")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
MC firmware is the core component of FSLMC bus and DPAA2 devices.
Prior to this patch, MC firmware supported 10.10.x version. This
patch bumps the min supported version to 10.14.x.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Do a global replace of snprintf(..."%s",...) with strlcpy, adding in the
rte_string_fns.h header if needed. The function changes in this patch were
auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy.cocci --dir . --in-place
and then the files edited using awk to add in the missing header:
gawk -i inplace '/include <rte_/ && ! seen { \
print "#include <rte_string_fns.h>"; seen=1} {print}'
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
For files that already have rte_string_fns.h included in them, we can
do a straight replacement of snprintf(..."%s",...) with strlcpy. The
changes in this patch were auto-generated via command:
spatch --sp-file devtools/cocci/strlcpy-with-header.cocci --dir . --in-place
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Using the size of the source string is incorrect when printing using
snprintf. Instead pass in the buffer size to be used appropriately.
Fixes: 457ecf2953 ("bond: add debug info for mode 6")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This commit sets the min and max supported MTU values for igb devices
via the eth_igb_info_get() function. Min MTU supported is set to
ETHER_MIN_MTU and max MTU is calculated as the max packet length
supported minus the transport overhead. To aid in these calculations
a new MACRO 'E1000_ETH_OVERHEAD' has been introduced to consolidate
overhead calculation and avoid duplication.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit sets the min and max supported MTU values for ixgbe VF
devices via the ixgbevf_dev_set_mtu() function. Min MTU supported is
set to ETHER_MIN_MTU and max MTU is calculated as the max packet length
supported minus the transport overhead. As transport overhead is the
same for VF and PF ixgbe devices, reuse MACRO 'IXGBE_ETH_OVERHEAD' to
avoid duplication.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit sets the min and max supported MTU values for ixgbe devices
via the ixgbe_dev_info_get() function. Min MTU supported is set to
ETHER_MIN_MTU and max MTU is calculated as the max packet length
supported minus the transport overhead. To aid in these calculations
a new MACRO 'IXGBE_ETH_OVERHEAD' has been introduced to consolidate
overhead calculation and avoid duplication.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit sets the min and max supported MTU values for i40e VF
devices via the i40evf_dev_info_get() function. Min MTU supported
is set to ETHER_MIN_MTU and max MTU is calculated as the max packet
length supported minus the transport overhead.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This commit sets the min and max supported MTU values for i40e devices
via the i40e_dev_info_get() function. Min MTU supported is set to
ETHER_MIN_MTU and max mtu is calculated as the max packet length
supported minus the transport overhead.
Signed-off-by: Ian Stokes <ian.stokes@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Device speed capability should be specified based on different PHY types
instead of a fixed value, this patch fix the issue.
Fixes: 690175ee51 ("net/ice: support getting device information")
Cc: stable@dpdk.org
Signed-off-by: Chenmin Sun <chenmin.sun@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Since previous test is for mtu < 1519 the next else if
is always true. This causes the lgtm static tool to complain.
Not a real issue, just cosmetic.
Fixes: 76d4c652e0 ("virtio: add extended stats")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Rami Rosen <ramirose@gmail.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Since previous test is for mtu < 1519 the next else if
is always true. This causes the lgtm static tool to complain.
Not a real issue, just cosmetic.
Fixes: 4e9c73e96e ("net/netvsc: add Hyper-V network device")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Acked-by: Rami Rosen <ramirose@gmail.com>
For E-Switch configurations over multiport Infiniband devices
we should add source vport match to correctly distribute
traffic between representors.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This patch modifies asynchronous event handler to support multiport
Infiniband devices. Handler queries the event parameters, including
event source port index, and invokes the handler for specific
devices with appropriate port_id.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
We are implementing the support for multiport Infiniband device
with representors attached to these multiple ports. Asynchronous
device event notifications (link status change, removal event, etc.)
should be shared between ports. We are going to implement shared
event handler and this patch introduces appropriate device
structure changes and updated event handler install and uninstall
routines.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The code is updated to provide IB port index for the Verbs
objects being created - QPs and Verbs Flows.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The code is updated to use the shared IB device context and
device handles. The IB device context is shared between
reprentors created over the single multiport IB device. All
Verbs and DevX objects will be created within this shared context.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The code is updated to use the shared IB device attributes,
located in the shared IB context. It saves some memory if
there are representors created over the single Infiniband
device with multiple ports.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The PMD code is updated to use Protected Domain from the
shared IB device context. The Domain is shared between
all devices belonging to the same multiport Infiniband device.
If IB device has only one port, the PD is not shared, because
there is only ethernet device created over IB one.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The IB device names are moved from device private data
to the shared context, code involving the names is updated.
The IB port index treatment is added where it is relevant.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The Mellanox NICs support SR-IOV and have E-Switch feature.
When SR-IOV is set up in switchdev mode and E-Switch is enabled
we have so called VF representors in the system. All representors
belonging to the same E-Switch are created on the basis of the
single PCI function and with current implementation each representor
has its own dedicated Infiniband device and operates within its
own Infiniband context. It is proposed to provide representors
as ports of the single Infiniband device and operate on the
shared Infiniband context saving various resources. This patch
introduces appropriate structures.
Also the functions to allocate and free shared IB context for
multiport are added. The IB device context, Protection Domain,
device attributes, Infiniband names are going to be relocated
to the shared structure from the device private one.
mlx5_dev_spawn() is updated to support shared context.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
mlx5_pci_probe() routine is refactored to probe the ports
of found Infiniband devices. All active ports (with attached
network interface), belonging to the same Infiniband device
will use the single shared Infiniband context of that device.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
There is the routine mlx5_nl_portnum() added to get
the number of ports of multiport Infiniband device.
It is assumed the Uplink/VF representors are attached
on these ports.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
There is the routine mlx5_nl_ifindex() returning the
network interface index associated with Infiniband device.
We are going to support multiport IB devices, now function
takes the IB port as argument and returns ifindex associated
with tuple <IB device, IB port>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The master device and VF representors were distinguished by
presence of port name, master device did not have one. The new Linux
kernels starting from 5.0 provide the port name for master device
and the implemented representor recognizing method does not work.
The new recognizing method is based on querying the VF number,
has been created on the base of the device.
The IFLA_NUM_VF attribute is returned by kernel if IFLA_EXT_MASK
attribute is specified in the Netlink request message.
Also the presence check of device symlink in device sysfs folder
is added to distinguish representors with sysfs based method.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
We are consistently passing 1 as the argument in the data path,
so there is no need to define avail/used flags as function-like
macros anymore. This patch changes the avail and used flags to
constants. And a frequently used combination is also introduced.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch fixes the multi-process support for virtio-user.
Currently virtio-user just provides some limited secondary
process supports. Only some basic operations can be done in
secondary process on virtio-user port, e.g. getting port stats.
Actions which will trigger the communication with vhost backend
can't be done in secondary process for now, as the fds are
not synced between processes. The processing of server mode
devargs is also moved into virtio_user_dev_init().
Fixes: cdb068f031 ("bus/vdev: scan by multi-process channel")
Fixes: ee27edbe0c ("drivers/net: share vdev data to secondary process")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
"The macro name '_VHOST_NET_USER_H' of this include guard is used
in 2 different header files."
lib/librte_vhost/vhost_user.h has the same include guard.
Renamed the include guard in vhost.h to differentiate.
Fixes: 6a84c37e39 ("net/virtio-user: add vhost-user adapter layer")
Cc: stable@dpdk.org
Signed-off-by: Andrius Sirvys <andrius.sirvys@intel.com>
Acked-by: Rami Rosen <ramirose@gmail.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Add functions to set the link state up or down.
Signed-off-by: Pablo Cascón <pablo.cascon@netronome.com>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Since the VLAN header is stripped from mbuf data, PKT_RX_VLAN_STRIPPED
should be set in offload flag.
Fixes: 6b59a3bc82 ("fm10k: fix VLAN in Rx mbuf")
Fixes: 7092be8437 ("fm10k: add vector Rx")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Add implementation for probe in secondary.
Failsafe will attempt to attach all the sub-devices in
secondary process.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
In multiprocess context, the pointer to sub-device is shared between
processes. Previously, it was a pointer to per process eth_dev so
it's needed to replace this dependency.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
In multiprocess context, the sub-device structure is shared
between processes. The reference to the failsafe device was
a per process pointer. It's changed to port id which is the
same for all processes.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
In multiprocess context, the private structure is shared between
processes. The back reference from private to generic data was using
a pointer to a per process eth_dev. It's now changed to a reference of
the shared data.
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
This patch fixes the build failure with message:
drivers/net/mlx5/mlx5_ethdev.c: In function ‘mlx5_sysfs_switch_info’:
drivers/net/mlx5/mlx5_ethdev.c:1381:3:
error: ignoring return value of ‘fscanf’, declared with attribute
warn_unused_result [-Werror=unused-result]
fscanf(file, "%s", port_name);
^
Which reproduces on Ubuntu 16.04 LTS with
gcc (Ubuntu 5.4.0-6ubuntu1~16.04.10) 5.4.0 20160609.
Fixes: b2f3a38101 ("net/mlx5: support new representor naming format")
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Dekel Peled <dekelp@mellanox.com>
The bnxt driver is not correctly setting the receive VLAN offload
flags. When VLAN is offloaded the driver must set the
PKT_RX_VLAN_STRIPPED flag.
Actually, several drivers have the same bug, only most of the
Intel drivers look right. Any driver that sets vlan_tci is probably
stripping the tag, and should be setting RX_VLAN_STRIPPED.
To quote rte_mbuf.h:
/**
* The RX packet is a 802.1q VLAN packet, and the tci has been
* saved in in mbuf->vlan_tci.
* If the flag PKT_RX_VLAN_STRIPPED is also present, the VLAN
* header has been stripped from mbuf data, else it is still
* present.
*/
Fixes: 2eb53b134a ("net/bnxt: add initial Rx code")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
A log message is required when provided RSS key is
not valid so that driver will use the default RSS key.
Fixes: ecad87d223 ("net/i40e: move RSS to flow API")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch enabled RSS for UPD/TCP/SCTP+IPV4/IPV6 packets.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If E810 download package failed, driver need to go to safe mode.
In the safe mode, some advanced features will not be supported.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch enables package downloading to the device. The package is
to be in the /lib/firmware/intel/ice/ddp directory and named ice.pkg.
The package is shared by the kernel driver and the DPDK PMD.
There is no per device package be supported so far, all the
devices can only download the same package. This limitation will
be removed in the future.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The return value from bus->find_device is a rte_device
which is not safe to cast to a rte_vdev_device structure.
It doesn't really matter since only being checked for NULL
but static checkers might find a bug here.
Fixes: 56252de779 ("net/vdev_netvsc: add automatic probing")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Matan Azrad <matan@mellanox.com>
Move all bit ops related functions from ice_osdep.h into ice_bitops.h.
Also remove the limitation that bitmap can only be 64 bits in
ice_set_bit and ice_clear_bit.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Revert the workaround for allocating TCAM and FV entries to align
with latest firmware.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
OS package's format is changed, field vector's protocol offset size is
changed from 8 bit to 16 bit. So base code also need to align to this,
or PMD will not be able to load OS package correctly.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. clean flow entry's action structure after remove it.
2. initialized priority when add a new flow entry
3. remove RSS configuration before deleting the flow profile.
Fixes: aa1cd410fa ("net/ice/base: add flow module")
Fixes: 51d04e4933 ("net/ice/base: add flexible pipeline module")
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch ensure that TCAM allocations made by a newly added VSIG
that has the same characteristic list of an existing VSIG are removed.
Fixes: 51d04e4933 ("net/ice/base: add flexible pipeline module")
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. Add call to replay RSS configurations
2. Add RSS configurations to end of list and not the head to avoid
inversion on replay.
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add flow director related support base code.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add module to support DCB related features.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Improved the profile reference counting, by moving it from being
based on how many TCAM entries using the profile to how many
profile map entries are using the profile.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Code added to check the FW recovery mode. This function will be
used by the drivers during init to check whether the FW is in
recovery mode or not. If FW is in recovery mode then the drivers
need to run in a recovery mode where it can allow only limited
operations. Link should be down, allow only certain AQ commands
etc.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
If there is no queue to disable, return appropriate configuration error
earlier without acquiring the lock.
Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Klocwork points out some code is unreachable in
ice_get_itr_intrl_gran and ice_ptg_find_ptype.
The patch removed the unreachable code and resolved the static
analysis reported issues.
Fixes: 51d04e4933 ("net/ice/base: add flexible pipeline module")
Fixes: 453d087cca ("net/ice/base: add common functions")
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Update copyright time to 2019.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. Fix some problems with filling the HW tables.
2. Fix a logic error in ice_rem_prof_from_list.
Fixes: 51d04e4933 ("net/ice/base: add flexible pipeline module")
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
If allocating a VSI to a VSIG fails the local allocations made for VSIG
profiles and change-lists will not be removed. Adding calls to free
these entries on error in VSIG management calls.
Signed-off-by: Vignesh Sridhar <vignesh.sridhar@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Profile TCAM entry removal is handled by the firmware when
freeing the resource, so the driver does not need to write these
default entries back with an update Package action.
This patch removes writing of the TCAM entry using Update Package
command when removing it, since the entry has already been freed
by firmware.
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add define for 52 byte RSS hash key size, and add struct
ice_aqc_get_set_rss_keys comments regarding setting 40 bytes and
52 byte hash key.
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Extend the functionality of the admin queue command by including
additional status and ID bits to improve link topology configuration.
Signed-off-by: Matthew Vick <matthew.vick@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In the ice_aq_set_phy_cfg AQ command, the 16.4 bit is reserved.
This patch will make sure that this bit will never be set to 1.
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The patch added to retrieve the queue context and update the queue
handle for lan queues.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Change below function as static and also relocated code line
to align with kernel driver.
ice_aq_move_sched_elems
ice_sched_get_agg_node
ice_sched_set_node_bw_lmt
ice_sched_cfg_node_bw_alloc
ice_sched_add_agg_cfg
ice_sched_rm_agg_cfg
ice_sched_move_vsi_to_agg
ice_sched_del_rl_profile
ice_sched_rm_unused_rl_prof
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Update macros for metadata and package flags.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. ICE_SW_LKUP_LAST need to be handled correctly in
ice_aq_alloc_free_vsi_list and ice_update_vsi_list_rule
2. ICE_SW_LKUP_ETHERTYPE_MAC need to be handled correctly in
ice_update_vsi_lkup_fltr
3. free package segment pointer during ice_deinit_hw
Fixes: c7dd159311 ("net/ice/base: add virtual switch code")
Fixes: 453d087cca ("net/ice/base: add common functions")
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. ice_rem_all_sw_rules_info - remove all switch rules.
2. ice_reply_all_fltr - replay all filters stored in book keeping list.
These APIs will be used when switch rule feature is enabled.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. ice_add_mac_with_sw_marker - add filter with software marker.
2. ice_add_mac_with_counter - add filter with counter enabled.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. ice_get_vsi_promisc - get promiscuous mode of give VSI.
2. ice_get_vsi_vlan_promisc - get VLAN promiscuous mode of given VSI.
PMD may use these APIs to check the real HW status, but not rely on
a software flag when something abnormal.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. ice_alloc_res_cntr - allocate resource counter
2. ice_free_res_cntr - free resource counter
3. ice_alloc_vlan_res_counter - allocate vlan resource counter
4. ice_free_vlan_res_counter - free vlan resource counter
These APIs will be used when try to count the number of a flow be
hit.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. ice_aq_get_res_alloc - get allocated resources.
2. ice_aq_get_res_descs - get allocated resource descriptors.
These APIs may help to PMD to enable some debug utilities to
dump the resource allocation status.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add API ice_remove_eth_mac and ice_add_eth_mac to support
adding / removing ethertype (or MAC) based filter rules.
PMD driver can use these APIs to enable related rte_flow rule.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Added code to allocate VSI queue contexts to save the queue specific
information like bandwidth etc.
Signed-off-by: Victor Raj <victor.raj@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add below APIs in switch module
1. ice_aq_get_vsi_params - get VSI context info
2. ice_aq_add_update_mir_rule - add/update mirror rule
3. ice_aq_delete_mir_rule - delete mirror rule
4. ice_aq_set_storm_ctrl - set storm control configuration
5. ice_aq_get_storm_ctrl - get storm control configuration
PMD can use these APIs to enable mirror rule and storm control
related features.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Remove static of below functions and declare them as external
APIs.
ice_aq_add_vsi
ice_aq_free_vsi
ice_aq_update_vsi
ice_aq_add_lan_txq
ice_init_pkg
So far the purpose is just to sync with kernel driver.
They are reserved for future use.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Remove unnecessary macro and data structure.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
For components that make a copy of an external pipeline package file
(i.e. the Linux and FreeBSD drivers), save the size of the package
file along with the copy so that both can be used when calling
ice_init_pkg() after a CORER/GLOBR reset.
Also, do not free the copy of the package file in ice_init_pkg()
since it is needed afterward for subsequent resets.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
1. Add macro ice_for_each_traffic_class to loop for each
traffic class.
2. Add macro MIN_T to wrap min with type conversion.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add two helper functions in common module.
1. ice_aq_set_mac_cfg to help configure maximum frame size with AQ
command
2. ice_get_ctx help to extract context bits from a packet structure.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Improve comments to follow naming rules.
Also the patch include some minor cleanup.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add two APIs ice_alloc_sw and ice_free_sw to support
switch related resource allocation and free.
These APIs are required when we enable switch flow.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
Reviewed-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add function pointers of buffer releasing for RX and
TX queues, for vector functions will be added for RX
and TX.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The TX setting functions is not called.
Fixes: 17c7d0f9d6 ("net/ice: support basic Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Fix the following warning when building with musl libc:
In file included from ../drivers/net/netvsc/hn_vf.c:14:
/usr/include/sys/fcntl.h:1:2: warning: #warning redirecting
incorrect #include <sys/fcntl.h> to <fcntl.h> [-Wcpp]
Fixes: dc7680e859 ("net/netvsc: support integrated VF")
Cc: stable@dpdk.org
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Fixes following build error on systems without execinfo.h:
drivers/net/nfp/nfpcore/nfp_cpp_pcie_ops.c:19:10: fatal error:
execinfo.h: No such file or directory
#include <execinfo.h>
^~~~~~~~~~~~
Fixes: c7e9729da6 ("net/nfp: support CPP")
Cc: stable@dpdk.org
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
The implementation reuses the external memory registration work done by
commit[1].
Note about representors:
The current representor design will not work
with those map and unmap functions. The reason is that for representors
we have multiple IB devices share the same PCI function, so mapping will
happen only on one of the representors and not all of them.
While it is possible to implement such support, the IB representor
design is going to be changed during DPDK19.05. The new design will have
a single IB device for all representors, hence sharing of a single
memory region between all representors will be possible.
[1]
commit 7e43a32ee0
("net/mlx5: support externally allocated static memory")
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Move the memory region creation to a separate function to
prepare the ground for the reuse of it on the PCI driver map and unmap
functions.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
- mbuf_size and mtu are now being calculated according
to the given mb-pool.
- max_mtu is now being set according to the given mtu
the above two changes provide the ability to work with jumbo frames
Signed-off-by: Liron Himi <lironh@marvell.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The fman device list need to be accessed across processes.
The hw device structures should be allocated with rte_calloc
instead of calloc. The rte_calloc is not available at the
time of bus scan, so better prepare the device list at probe.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
A reference to qman_fq_lookup_table need to be saved in each
fq, so that it is retrieved while in running secondary process.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
The ethernet address was being converted to a string but
the code using that is no longer present.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
The VF device management in netvsc was using a pointer to the
rte_eth_devices. But the actual rte_eth_devices array is likely to
be place in the secondary process; which causes a crash.
The solution is to record the port of the VF (instead of a pointer)
and find the device in the per process array as needed.
Fixes: dc7680e859 ("net/netvsc: support integrated VF")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
All drivers should have SPDX on the first line of the source
files in the format
/* SPDX-License-Identifier: ...
Several files used minor modifications which were inconsistent
with the pattern. Fix it to make scanning tools easier.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
strcat does not check the destination length and there might be
chances of string overflow so instead of strcat, strlcat is used.
Fixes: 540a211084 ("bnx2x: driver core")
Fixes: e163c18a15 ("net/i40e: update ptype and pctype info")
Cc: stable@dpdk.org
Signed-off-by: Chaitanya Babu Talluri <tallurix.chaitanya.babu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shahed Shaikh <shshaikh@marvell.com>
Caught by code review, rxq and txq indexes are on 16bits.
Fixes: d1d1e664c6 ("bonding: free queue memory when closing")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Caught by code review, those variables are supposed to be on 16bits to
avoid endless loops in the (unlikely?) case where the application asks
for receiving more than 256 packets and the accumulated num_rx_total
count reaches 256:
uint16_t num_rx_total = 0;
uint8_t j, k;
j = num_rx_total;
num_rx_total += rte_eth_rx_burst();
for (k = j; k < 2 && k < num_rx_total; k++)
rte_prefetch0(rte_pktmbuf_mtod(bufs[k], void *));
while (j < num_rx_total) {
j++;
}
Fixes: 46fb436836 ("bond: add mode 4")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Caught by code review, with port id conversion to 16bits, the slave id
have been extended to 16bits as well (both slave index and count).
Fixes: f8244c6399 ("ethdev: increase port id range")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Following the port id conversion to 16bits, two references to bonding
port id have been missed.
Fixes: f8244c6399 ("ethdev: increase port id range")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Checksum good offload flags are not being set and some of the
packet type flags are missing on received packets. So, rework
Rx path to set proper ol_flags and packet_type in mbufs.
Fixes: 78fc1a716a ("cxgbe: improve Rx performance")
Cc: stable@dpdk.org
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
All Rx packet handling is done in process_responses() and hence
t4_ethrx_handler() never gets called. So, remove it.
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
When monitor(port-mirroring) traffic from other LACP port-channel,
rx_machine_update may be receiving other LACP negotiation packets.
Thus bond mode 4 negotiation will fail.
Fixes: 112891cd27 ("net/bonding: add dedicated HW queues for LACP control")
Cc: stable@dpdk.org
Signed-off-by: Liang Zhang <zhangliang@bigo.sg>
Acked-by: Chas Williams <chas3@att.com>
Phy capabilities are bit offsets in libefx, but was used as bit masks.
Fixes: d23f3a89ab ("net/sfc: support link speed and duplex settings")
Fixes: f82e33afbb ("net/sfc: support link speeds up to 100G")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Until now, DPAA2 driver was configured to drop any packet which
was marked as malformed by hardware - which included those with
wrong checksum.
With this patch, that configuration has been removed - hereafter,
all packets arriving on a DPMAC link would be forwarded to a DPNI
and further processing would be done as configured for a standard
packet path.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
If the value _SC_IOV_MAX is missing, sysconf returns -1.
In this case, iov_max is set to a default value of 1024.
This should never happen except for redhat bug:
https://bugzilla.redhat.com/show_bug.cgi?id=1504165
Fixes: ec12df9504 ("net/tap: fix support for large Rx queues")
Cc: stable@dpdk.org
Signed-off-by: Oleg Polyakov <olegp123@walla.co.il>
Acked-by: Keith Wiles <keith.wiles@intel.com>
sprintf function is not secure as it doesn't check the length of string.
More secure function snprintf is used.
Fixes: 896c265ef9 ("net/nfp: use new CPP interface")
Fixes: c4171b520b ("net/nfp: support PF multiport")
Cc: stable@dpdk.org
Signed-off-by: Pallantla Poornima <pallantlax.poornima@intel.com>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Tested-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Replace ice_read_sr_word with ice_read_sr_buf in ice_get_eeprom.
Fixes: d0dd1c8e19 ("net/ice: support EEPROM information getting")
Cc: stable@dpdk.org
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch improves descriptors refill by using the same
batching strategy as done in in-order and mergeable path.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add a helper for sending commands in split ring to make the
code consistent with the corresponding code in packed ring.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add a helper for disabling interrupts in split ring to make the
code consistent with the corresponding code in packed ring.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Drop the unused field tx_indir_pq from virtio_tx_region
structure.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Drop redundant suffix (_packed and _event) from the fields in
packed ring structure.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Put split ring and packed ring specific fields into separate
sub-structures, and also union them as they won't be available
at the same time.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Cache the AVAIL, USED and WRITE bits to avoid calculating
them as much as possible. Note that, the WRITE bit isn't
cached for control queue.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Typically, after enabling Rx interrupt, a check should be done
to make sure that there is no new incoming packets before going
to sleep. So a barrier is needed to make sure that any following
check won't happen before the interrupt is actually enabled.
Fixes: c056be239d ("net/virtio: add Rx interrupt enable/disable functions")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When disabling interrupt, the shadow event flags should also be
updated accordingly. The unnecessary wmb is also dropped.
Fixes: e9f4feb7e6 ("net/virtio: add packed virtqueue helpers")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The pointer to event structure should be cast to uintptr_t first.
Fixes: f803734b0f ("net/virtio: vring init for packed queues")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The multiqueue support in virtio-user with vhost kernel backend
is broken when tap name isn't specified by users explicitly,
because the tap name returned by ioctl(TUNSETIFF) isn't saved
properly, and multiple tap interfaces will be created in this
case. Fix this by saving the dynamically allocated tap name
first before reusing the ifr structure. Besides, also make it
possible to support the format string in tap name (e.g. foo%d)
specified by users explicitly.
Fixes: 791b43e088 ("net/virtio-user: specify MAC of the tap")
Cc: stable@dpdk.org
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
The octeontx driver is creating vdev with name "OCTEONTX_PMD"
which is an artifact from how RTE_PMD_REGISTER_VDEV arguments
work.
Change to use the same convention as all the other network
drivers ie "net_octeontx").
Fixes: f7be70e513 ("net/octeontx: add net device probe and remove")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The maximum packet length (max_pkt_len) from the firmware does not
include CRC, so do not subtract 4 when deriving the max MTU. This
change effectively increases the max MTU by 4B. Apps often assume max
MTU = max_rx_pkt_len - 14 (ethernet header), and attempt to set the
MTU to that value (i.e. set MTU to max HW value). This change
incidentally allows such apps to change MTU to max value successfully.
Fixes: bb34ffb848 ("net/enic: determine max egress packet size and max MTU")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Max number of xstats items was returned instead of actual number
of filled in records.
Fixes: fbe059e872 ("net/atlantic: implement device statistics")
Cc: stable@dpdk.org
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Original vlan offload code declared callbacks, but did not
enable the feature offload bit
Fixes: f7c2c2c8c5 ("net/atlantic: implement VLAN filters and offloads")
Cc: stable@dpdk.org
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Default rxtx logging used ERR level, that caused logger to always
trigger. That may cause perf degradation even if logger was not enabled
but compiled in.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
In case link speed is re configured after port start, it does not
takes the requested speed value, but instead just sets full autoneg
mask.
Fixes: 7943ba05f6 ("net/atlantic: add link status and interrupt management")
Cc: stable@dpdk.org
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Default dev addr is replaced with magic field from the request.
Length is allowed to be less than maximum.
SMBUS access bit definitions also better organised now.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Found by Coverity scan. This is a real memory corruption.
There is no need in extra RTE_ALIGN macros since the
request/result structures are 4-byte aligned by definition.
Coverity issue: 323518, 323520
Fixes: ce4e8d4180 ("net/atlantic: implement EEPROM get/set")
Cc: stable@dpdk.org
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Pavel Belous <pavel.belous@aquantia.com>
Found by Coverity scan. Checks are useless
because at these code places err is always zero.
Fixes: 86d36773bd ("net/atlantic: implement firmware operations")
Cc: stable@dpdk.org
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
These are just convention breakage on rte_errno,
no real harm from that.
Fixes: 2b1472d715 ("net/atlantic: implement Tx path")
Cc: stable@dpdk.org
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
There is a corner case in which driver won't post
receive buffers when driver has processed all received packets
in single loop (i.e. hw_consumer == sw_consumer) and then
HW will start dropping packets since it did not see new receive
buffers posted.
This corner case is seen when size of Rx ring is less than or equals
Rx packet burst count for dev->rx_pkt_burst().
Fixes: 8f23124745 ("net/qede: fix performance bottleneck in Rx path")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
ixgbevf VLAN strip and extend capabilities were removed when
migrating to the bit flags implementation.
Restoring the capability to enable the VLAN strip offload at
configuration time.
Fixes: ec3b1124d1 ("net/ixgbe: convert to new Rx offloads API")
Cc: stable@dpdk.org
Signed-off-by: David Harton <dharton@cisco.com>
Acked-by: Wei Zhao <wei.zhao1@intel.com>
Kernel update [1] introduce new format of representors names.
This patch implements RFC [2], updating MLX5 PMD to support the new
format, while maintaining support of the existing format.
[1] https://github.com/torvalds/linux/commit/c12ecc2
[2] http://mails.dpdk.org/archives/dev/2019-March/125676.html
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Current code is not properly giving the RSS information
regarding the redirection table.
Fixes: 934e4c60fb ("nfp: add RSS")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
The driver multiple rxq allocation logs a message at error level
but it really is a debug message.
Fixes: 51fafb89a9 ("net/bnxt: get rid of ff pools and use VNIC info array")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
When using bnxt on bare-metal with vfio-pci, the driver logs an
unnecessary warning. Hardware works fine, message is not urgent.
Change it to INFO level.
Fixes: 62196f4e09 ("mem: rename address mapping function to IOVA")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Make bnxt driver consistent with all other network drivers
by setting default to NOTICE for log level.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The version message is double spaced in the log.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This message doesn't need to be at INFO level, it is a normal
situation and only useful for debugging.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Inlining a packet to WQE that cross the WQ wraparound, i.e. the WQE
starts on the end of the ring and ends on the beginning, is not
supported and blocked by the data path logic.
However, in case of TSO, an extra inline header is required before
inlining. This inline header is not taken into account when checking if
there is enough room left for the required inline size.
On some corner cases were
(ring_tailroom - inline header) < inline size < ring_tailroom ,
this can lead to WQE being written outsize of the ring buffer.
Fixing it by always assuming the worse case that inline of packet will
require the inline header.
Fixes: 3f13f8c23a ("net/mlx5: support hardware TSO")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Set RTE_PCI_DRV_IOVA_AS_VA in drv_flags. This allows initializing qede
PMD as non-root also on Linux v4.x, where /proc/self/pagemap can't be
acccessed without CAP_SYS_ADMIN privileges.
The flag was introduced generically but not in pmds in:
commit 815c7deaed ("pci: get IOMMU class on Linux")
Cc: stable@dpdk.org
Acked-by: Shahed Shaikh <shshaikh@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Time sync increment value is not configured for 25G device.
The patch fix this issue by setting the same value as 40G, this
aligned with kernel driver's behaviour.
Fixes: 75d133dd32 ("net/i40e: enable 25G device")
Cc: stable@dpdk.org
Reported-by: Michael Luo <michael.luo@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Michael Luo <michael.luo@intel.com>
Some firmwares, mostly for VFs, do not advertise the feature /
capability of changing the MAC address while the interface is up. With
such firmware a request to change the MAC address that at the same
time also tries to enable the not available feature will be denied by
the firmware resulting in an error message like:
nfp_net_reconfig(): Error nfp_net reconfig for ctrl: 80000000 update: 800
Fix set_mac_addr by not trying to enable a feature if it is not
advertised by the firmware.
Fixes: 2fe669f4bc ("net/nfp: support MAC address change")
Cc: stable@dpdk.org
Signed-off-by: Pablo Cascón <pablo.cascon@netronome.com>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Since rounding up the requested queue pairs to allow the VF to
request a non-aligned number was added, it may happen that the
requested number is less than the available num of queues but the
rounded up number is greater. In this case, it is not caught with
the usual checks but later when there is a reset and failed setup.
By rounding earlier the checks can be done before a failed reset
occurs, and a rounded max amount of available queues can be returned
to the VF.
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Rather than using linuxapp and bsdapp everywhere, we can change things to
use the, more readable, terms "linux" and "freebsd" in our build configs.
Rather than renaming the configs we can just duplicate the existing ones
with the new names using symlinks, and use the new names exclusively
internally. ["make showconfigs" also only shows the new names to keep the
list short] The result is that backward compatibility is kept fully but any
new builds or development can be done using the newer names, i.e. both
"make config T=x86_64-native-linuxapp-gcc" and "T=x86_64-native-linux-gcc"
work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rename the macro and all instances in DPDK code, but keep a copy of
the old macro defined for legacy code linking against DPDK
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Rename the macro to make things shorter and more comprehensible. For
both meson and make builds, keep the old macro around for backward
compatibility.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The term "linuxapp" is a legacy one, but just calling the subdirectory
"linux" is just clearer for all concerned.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The patch adds the PF counterpart changes to support VF promiscuous
mode by DPDK PF driver.
For ixgbe, in order to support VF VLAN promiscuous or unicast
promiscuous, PF need to set register PFVML2FLT of bit UPE and VPE.
The patch aligned to kernel driver's implementation.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Function mlx5_tx_complete() reads completion entry information
from Tx queue.
For some processors not having strongly-ordered memory model,
there has to be a memory barrier between reading the entry index
and the entry fields, in order to guarantee data is valid.
Fixes: 54d3fe948d ("net/mlx5: poll completion queue once per a call")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
struct mlx5_cqe is defined in MLX5 PMD code (mlx5_prm.h).
It includes 64 bytes padding in case of (RTE_CACHE_LINE_SIZE == 128).
struct mlx5_err_cqe is defined in kernel, and doesn't include padding.
When running in debug mode, in case an error CQE is detected
it is printed using rte_hexdump().
The size of data to print should be sizeof(*cqe) instead of
sizeof(*err_cqe), to handle the case of (RTE_CACHE_LINE_SIZE == 128),
and print the full data in any case.
Fixes: c771499209 ("net/mlx5: extend debug logs verbosity")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
The call to strlcpy uses either libc, libbsd or internal rte_strlcpy.
No need to call the DPDK flavor explicitly.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Original patch changed logic of function mlx4_flow_merge_eth().
The setting of flow->promisc was wrongly removed.
This patch adds the removed setting of flow->promisc, to restore
the required behavior.
Fixes: c0d2392631 ("net/mlx4: support flow w/o ETH spec and with VLAN")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The mlx5 PMD probes the Verbs flow priorities supported with
ibv_create_flow() function. If rdma-core or kernel fails for
some reason, the returned error causes the drop queue is not
destroyed, and pd is locked by not freed resource.
Also the mlx5_flow_discover_priorities() returned negative value
as error, and this code was reported "as is", without sign
changing (eventually causing assert(err > 0)).
Fixes: 2815702bae ("net/mlx5: replace verbs priorities by flow")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Fix the check and associated log. Also, fix a typo in other log.
Fixes: 03d478e960 ("net/i40e: support PF respond VF request more queues")
Cc: stable@dpdk.org
Signed-off-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The NIC's interrupt source has some active handler when the
port removed. We should cancel the delay handler before removing
dev to prevent executing the delay handler.
Call Trace:
#0 ixgbe_disable_intr (hw=0x0, hw=0x0)
at /usr/src/debug/dpdk-18.11/drivers/net/ixgbe/ixgbe_ethdev.c:852
#1 ixgbe_dev_interrupt_delayed_handler (param=0xadb9c0
<rte_eth_devices@@DPDK_2.2+33024>)
at /usr/src/debug/dpdk-18.11/drivers/net/ixgbe/ixgbe_ethdev.c:4386
#2 0x00007f05782147af in eal_alarm_callback (arg=<optimized out>)
at /usr/src/debug/dpdk-18.11/lib/librte_eal/linuxapp/eal/
eal_alarm.c:90
#3 0x00007f057821320a in eal_intr_process_interrupts (nfds=1,
events=0x7f056cbf3e88) at /usr/src/debug/dpdk-18.11/lib/
librte_eal/linuxapp/eal/eal_interrupts.c:838
#4 eal_intr_handle_interrupts (totalfds=<optimized out>, pfd=18)
at /usr/src/debug/dpdk-18.11/lib/librte_eal/linuxapp/eal/
eal_interrupts.c:885
#5 eal_intr_thread_main (arg=<optimized out>)
at /usr/src/debug/dpdk-18.11/lib/librte_eal/linuxapp/eal/
eal_interrupts.c:965
#6 0x00007f05708a0e45 in start_thread () from /usr/lib64/libpthread.so.0
#7 0x00007f056eb4ab5d in clone () from /usr/lib64/libc.so.6
Fixes: 2866c5f1b8 ("ixgbe: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Inner packet matching is currently buggy in many cases.
1. Mishandling null spec ("match any").
The copy_item functions do nothing if spec is null. This is incorrect,
as all patterns should be appended to the L5 pattern buffer even for
null spec (treated as all zeros).
2. Accessing null spec causing segfault.
3. Not setting protocol fields.
The NIC filter API currently has no flags for "match inner IPv4, IPv6,
UDP, TCP, and so on". So, the driver needs to explicitly set EtherType
and IP protocol fields in the L5 pattern buffer to avoid false
positives (e.g. reporting IPv6 as IPv4).
Instead of keep adding "if inner, do something differently" cases to
the existing copy_item functions, introduce separate functions for
inner packet patterns and address the above issues in those
functions. The changes to the previous outer-packet copy_item
functions are mechanical, due to reduced indentation.
Fixes: 6ced137607 ("net/enic: flow API for NICs with advanced filters enabled")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
The VLAN fields in the NIC filter use little endian. The VLAN item is
in big endian, so swap bytes.
Fixes: 6ced137607 ("net/enic: flow API for NICs with advanced filters enabled")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
The filter API does not have flags for "match VXLAN". Explicitly set
the UDP destination port and mask in the L4 pattern. Otherwise, UDP
packets with non-VXLAN ports may be falsely reported as VXLAN.
1400 series VIC adapters have hardware VXLAN parsing. The L5 buffer on
the NIC starts with the inner Ethernet header, and the VXLAN header is
now in the L4 buffer following the UDP header. So the VXLAN spec/mask
needs to be in the L4 pattern, not L5. Older models still expect the
VXLAN spec/mask in the L5 pattern. Fix up the L4/L5 patterns
accordingly.
Fixes: 6ced137607 ("net/enic: flow API for NICs with advanced filters enabled")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Currently, the driver resets the vxlan port register only if overlay
offload is enabled. But, the register is actually tied to hardware
vxlan parsing, which is an independent feature and is always enabled
even if overlay offload is disabled. If left uninitialized, it can
affect flow rules that match vxlan. So always reset the port number
when HW vxlan parsing is available.
Fixes: 8a4efd1741 ("net/enic: add handlers to add/delete vxlan port number")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Some apps like VPP use a raw item to match UDP tunnel headers like
VXLAN or GENEVE. The NIC hardware supports such usage via L5 match,
which does pattern match on packet data immediately following the
outer L4 header. Accept raw items for these limited use cases.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
There are many copy_item functions, all with the same arguments, which
makes it difficult to add/change arguments. Move the arguments into a
struct to help subsequent commits that will add/fix features. Also
remove self-explanatory verbose comments for these local functions.
These changes are purely mechanical and have no impact on
functionalities.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Some apps like VPP use PASSTHRU+MARK flow rules to offload packet
matching to the NIC. Just like MARK+RSS used by OVS-DPDK and others,
PASSTHRU+MARK is used to "mark and then receive normally". Recent VIC
adapters support such flow rules, so enable PASSTHRU for this limited
use case.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Some apps like OVS-DPDK use MARK+RSS flow rules in order to offload
packet matching to the NIC. The RSS action in such flow rules simply
indicates "receive packet normally", not trying to override the port
wide RSS. The action is included in the flow rules simply to terminate
them, as MARK is not a fate-deciding action. And, the RSS action has a
most basic config: default hash, level, types, null key, and identity
queue mapping.
Recent VIC adapters can support these "mark and receive" flow
rules. So, enable support for RSS action for this limited use case.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Currently a pattern with an unsupported item type causes segfault,
because the flow handler is using the type as an array index without
checking bounds. Add an explicit check for unsupported item types and
avoid out-of-bound accesses.
Fixes: 6ced137607 ("net/enic: flow API for NICs with advanced filters enabled")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
The driver currently accepts mark ID 0 but does not report it in
matching packet's mbuf. For example, the following testpmd command
succeeds. But, the mbuf of a matching IPv4 UDP packet does not have
PKT_RX_FDIR_ID set.
flow create 0 ingress pattern ... actions mark id 0 / queue index 0 / end
The problem has to do with mapping mark IDs (32-bit) to NIC filter
IDs. Filter ID is currently 16-bit, so values greater than 0xffff are
rejected. The firmware reserves filter ID 0 for filters that do not
mark (e.g. steer w/o mark). And, the driver reserves 0xffff for the
flag action. This leaves 1...0xfffe for app use.
It is possible to simply reject mark ID 0 as unsupported. But, 0 is
commonly used (e.g. OVS-DPDK and VPP). So, when adding a filter, set
filter ID = mark ID + 1 to support mark ID 0. The receive handler
subtracts 1 from filter ID to get back the original mark ID.
Fixes: dfbd6a9cb5 ("net/enic: extend flow director support for 1300 series")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
The driver needs to explicitly set the protocol number (132) in the IP
header pattern, as the current firmware filter API lacks "match SCTP
packet" flag. Otherwise, the resulting NIC filter may lead to false
positives (i.e. NIC reporting non-SCTP packets as SCTP packets). The
flow director handler does the same (enic_clsf.c).
Fixes: 6ced137607 ("net/enic: flow API for NICs with advanced filters enabled")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
The firmware filter API does not have flags indicating "match SCTP
packet". Instead, the driver needs to explicitly add an IP match and
set the protocol number (132 for SCTP) in the IP header.
The existing code (copy_fltr_v2) has two bugs.
1. It sets the protocol number (132) in the match value, but not the
mask. The mask remains 0, so the match becomes a wildcard match. The
NIC ends up matching all protocol numbers (i.e. thinks non-SCTP
packets are SCTP).
2. It modifies the input argument (rte_eth_fdir_input). The driver
tracks filters using rte_hash_{add,del}_key(input). So, addding
(RTE_ETH_FILTER_ADD) and deleting (RTE_ETH_FILTER_DELETE) must use the
same input argument for the same filter. But, overwriting the protocol
number while adding the filter breaks this assumption, and causes
delete operation to fail.
So, set the mask as well as protocol value. Do not modify the input
argument, and use const in function signatures to make the intention
clear. Also move a couple function declarations to enic_clsf.c from
enic.h as they are strictly local.
Fixes: dfbd6a9cb5 ("net/enic: extend flow director support for 1300 series")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Remove unused functions. Specifically, vnic_set_rss_key() is
obsolete. enic_{add,del}_vlan() has never been supported in the
firmware. And, remove vnic_rss.c altogether as it becomes empty. These
were discovered by cppcheck.
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Shifting signed 32-bit values by 31-bits has the potential for
unexpected outcomes as compiler can overwrite a bit.
Specified that values are unsigned.
Errors are observed from running cppcheck.
Bugzilla ID: 58
Fixes: 69e209be54 ("net/axgbe: add register map and related macros")
Fixes: b5bf771922 ("bnx2x: driver support routines")
Fixes: ed2ced6fe9 ("net/bnxt: check initialization before accessing stats")
Fixes: 6fda3f0ddd ("net/cxgbe: add API to program hardware MPS table")
Fixes: bdb244b969 ("e1000: whitespace changes")
Fixes: 5a32a257f9 ("e1000: more NICs in base driver")
Fixes: 2fe669f4bc ("net/nfp: support MAC address change")
Fixes: defb9a5dd1 ("nfp: introduce driver initialization")
Fixes: ec94dbc573 ("qede: add base driver")
Fixes: d2e7d931d0 ("net/qede/base: formatting changes")
Fixes: cdc07e83bb ("net/tap: add eBPF program file")
Cc: stable@dpdk.org
Signed-off-by: Andrius Sirvys <andrius.sirvys@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
sprintf function is not secure as it doesn't check the length of string.
More secure function snprintf is used.
Fixes: daabf2fb94 ("net/softnic: map flow action to table action")
Cc: stable@dpdk.org
Signed-off-by: Pallantla Poornima <pallantlax.poornima@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Loopback mode is also supported on X540 and X550 NICs, according to
their datasheet (section 15.2). The way to set it up is a little
different of the 82599.
Signed-off-by: Julien Meunier <julien.meunier@nokia.com>
Acked-by: Wei Zhao <wei.zhao1@intel.com>
Only TX->RX loopback is supported currently on 82599EB. If a user wants
to apply an another loopback configuration (!= IXGBE_LPBK_82599_TX_RX),
ixgbe PMD ignores it and continues the configuration without raising
any error.
Let's increase robustness of this part by checking if the requested
loopback mode is correct for the current device, before starting it.
If it is not valid, PMD will refuse to start.
Signed-off-by: Julien Meunier <julien.meunier@nokia.com>
Acked-by: Wei Zhao <wei.zhao1@intel.com>
The sfc driver was still using RTE_LOGTYPE_PMD which was superseded
by local logging.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
The structure was not initialized.
Fixes: c9aa56edec ("net/tap: access primary process queues from secondary")
Cc: stable@dpdk.org
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Reviewed-by: Rami Rosen <ramirose@gmail.com>
Previous ungraceful exit may leave behind un-acked stale
interrupts for slowpath and fastpath.
Interrupt status polling function is started before FLR is
initiated, so we don't have a real way to protect this polling
function invoking an interrupt handler caused due to stale
interrupt status from previous ungraceful exit.
So, check uninitialized status block variables in interrupt
handling path which may lead to segfault.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
The private structure stored in rte_eth_dev->data->dev_private
was named "struct priv".
In order to ease code browsing, the structure is renamed
"struct mlx[45]_priv".
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This is the main patch which renames the macros, functions,
structs and any remaining strings in the iavf code.
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Rename Intel Ethernet Adaptive Virtual Function driver avf to iavf.
This is the first patch which will only renames the directory name,
lib name, filenames and updates the new name in makefile and meson
files. Also updates the #include files in source files.
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
pcap has historically shipped a custom pcap-config binary tool which
does the job of pkg-config. It was never compatible with cross
compilation.
Meson uses it when using dependency(), which then means cross
compilation fails.
Set pcap-config to empty in the meson cross compilation files so
that Meson will not use it, and add a fallback in case
dependency() fails.
libpcap 1.9.0 finally ships a pkg-config file so everything will
work out of the box in the future.
Signed-off-by: Luca Boccassi <luca.boccassi@microsoft.com>
Whenever possible (if the library ships a pkg-config file) use meson's
dependency() function to look for it, as it will automatically add it
to the Requires.private list if needed, to allow for static builds to
succeed for reverse dependencies of DPDK. Otherwise the recursive
dependencies are not parsed, and users doing static builds have to
resolve them manually by themselves.
When using this API avoid additional checks that are superfluous and
take extra time, and avoid adding the linker flag manually which causes
it to be duplicated.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Bruce Richardson <bruce.richardson@intel.com>
Rather than relying on the target machine architecture, use the
size of a pointer from the compiler to determine if we are 64-bits
or not. This allows correct behaviour when you pass -m32 as a compile
option. It also allows us to use this value repeatedly throughout the
repo rather than continually testing for the sizeof(void*).
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Luca Boccassi <bluca@debian.org>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch introduces an optimized enqueue function in packed
ring for the case that virtio net header can be prepended to
the unchained mbuf.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This patch introduces a helper for clearing the virtio net header
to avoid the code duplication. Macro is used as it shows slightly
better performance.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When IN_ORDER feature is negotiated, device may just write out a
single used descriptor for a batch of buffers:
"""
Some devices always use descriptors in the same order in which they
have been made available. These devices can offer the VIRTIO_F_IN_ORDER
feature. If negotiated, this knowledge allows devices to notify the
use of a batch of buffers to the driver by only writing out a single
used descriptor with the Buffer ID corresponding to the last descriptor
in the batch.
The device then skips forward in the ring according to the size of the
batch. The driver needs to look up the used Buffer ID and calculate the
batch size to be able to advance to where the next used descriptor will
be written by the device.
"""
But the Tx path of packed ring can't handle this. With this patch,
when IN_ORDER is negotiated, driver will manage the IDs linearly,
look up the used buffer ID and advance to the next used descriptor
that will be written by the device.
Fixes: 892dc798fa ("net/virtio: implement Tx path for packed queues")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When IN_ORDER feature is negotiated, device may just write out a
single used ring entry for a batch of buffers:
"""
Some devices always use descriptors in the same order in which they
have been made available. These devices can offer the VIRTIO_F_IN_ORDER
feature. If negotiated, this knowledge allows devices to notify the
use of a batch of buffers to the driver by only writing out a single
used ring entry with the id corresponding to the head entry of the
descriptor chain describing the last buffer in the batch.
The device then skips forward in the ring according to the size of
the batch. Accordingly, it increments the used idx by the size of
the batch.
The driver needs to look up the used id and calculate the batch size
to be able to advance to where the next used ring entry will be written
by the device.
"""
Currently, the in-order Tx path in split ring can't handle this.
With this patch, driver will allocate desc_extra[] based on the
index in avail/used ring instead of the index in descriptor table.
And driver can just relay on the used->idx written by device to
reclaim the descriptors and Tx buffers.
Fixes: e5f456a98d ("net/virtio: support in-order Rx and Tx")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
We should try to cleanup at least the 'need' number of descs.
Fixes: 892dc798fa ("net/virtio: implement Tx path for packed queues")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
test_alb_reply_from_client test fails due to incorrect active slave
array's index. This was due to invalid active slave count.
Count of internals->active_slave is not updated even when active slave
is deactivated.
Hence active slave count always keeps incrementing beyond the actual
active slaves.
Fix is to set the internals->active_slave to starting index 0 whenever
it exceeds the number of slaves in active slave list and also update
the active slave count during slave de-activation.
Fixes: e1110e9776 ("net/bonding: fix Rx slave fairness")
Cc: stable@dpdk.org
Signed-off-by: Hari Kumar Vemula <hari.kumarx.vemula@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Chas Williams <chas3@att.com>
For active-backup, tlb, and alb mode,
bond_ethdev_promiscuous_{enable,disable} tries to set promisc mode on
the primary port, even when there are no slaves. It is harmless, as
rte_eth_promiscuous_{enable,disable} does nothing if the port number
is invalid. But, it does print a warning message. Here is an example
from testpmd.
testpmd> create bonded device 5 0
Created new bonded device net_bonding_testpmd_0 on (port 4).
Invalid port_id=33
testpmd> set promisc 4 off
Invalid port_id=33
33 in this case is RTE_MAX_ETHPORTS + 1, the invalid primary port
number used within the bonding driver. This warning message is
harmless but can be confusing to the user. So do not try to set
promisc on a primary port when we know it does not exist (i.e. no
slaves).
Fixes: 2efb58cbab ("bond: new link bonding library")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Acked-by: Chas Williams <chas3@att.com>
This patch fixes a regression introduced by
commit 49d3978d57 ("net/qede: fix Tx tunnel offload support mask")
in which qede_xmit_prep_pkts() breaks the loop for successful
check of Tunneling offload flags instead of continuing, resulting
in tx_pkt_prepare return a failure.
Fixes: 49d3978d57 ("net/qede: fix Tx tunnel offload support mask")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Whenever the app is calling rte_eth_dev_info_get(), it shouldn't use the
admin command. It was causing problems, if it was called from the
secondary process - the main process was crashing, and the secondary app
wasn't getting any result, as the admin request couldn't be processed by
the process which was requesting the data.
To fix that, the data is being written to the adapter structure during
device initialization routine.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Copying the link properties of the first slave added may copy an
invalid link status. The speed and duplex of the slave may not
be known at this time. Delay setting the properties until the
first slave reports as link up. Note that we are still ignoring
an error from link_properties_valid. For some bonding modes,
802.3ad, we should not activate the slave if it does not have
matching link properties.
Fixes: a45b288ef2 ("bond: support link status polling")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
The Tx burst routine always needs to check for pending LACPDUs
and send them if available. Do this first to prioritize the
control traffic. We can still early exit, before calculating
the distribution slaves, if there isn't any data packets.
Fixes: 09150784a7 ("net/bonding: burst mode hash calculation")
Cc: stable@dpdk.org
Reported-by: Hui Zhao <zhaohui8@huawei.com>
Signed-off-by: Chas Williams <chas3@att.com>
VLAN filter is required to be configured during dev_start according to
dev_conf.rxmod.offloads setting, so ice_vlan_offload_set is called to
handle this.
Fixes: 690175ee51 ("net/ice: support getting device information")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Enable CLEARPBA bit is required by ice NIC of A0/A1 version to
enable admin queue interrupt.
Also enable CLEARPBA bit does no impact on AVF behaviour when be
hosted by other devices, so we can make it as default.
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Set RTE_PCI_DRV_IOVA_AS_VA in drv_flags: this allows initializing bnxt
PMD as non-root also on Linux v4.x, where /proc/self/pagemap can't be
accessed without CAP_SYS_ADMIN privileges.
Cc: stable@dpdk.org
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We can transmit if there is at least one distributing slave.
Fixes: 09150784a7 ("net/bonding: burst mode hash calculation")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
Fix segment fault when detach a device due to some redundant function
call in ice_dev_uninit.
Fixes: f9cf4f8641 ("net/ice: support device initialization")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The API function rte_eth_dev_fw_version_get() is querying drivers
via the operation callback fw_version_get().
The implementation of this operation is added for mlx4 and mlx5.
Both functions are copying the same ibverbs field fw_ver
which is retrieved when calling ibv_query_device[_ex]()
during the port probing.
It is tested with command "drvinfo" of examples/ethtool/.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Original patch implemented the use of match_metadata offload in the
different burst functions.
The concurrent use of match_metadata and multi_segs offloads was
not handled.
This patch updates function txq_scatter_v(), to pass metadata value
from mbuf to wqe, when indicated by offload flags.
Fixes: 6bd7fbd03c ("net/mlx5: support metadata as flow rule criteria")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This minor cleanup patch removes an unnecessary forward
declaration of virtio_intr_enable() in net/virtio PMD.
Fixes: fe19d49cb5 ("net/virtio: fix Rx interrupt with VFIO")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
We don't need to relay available ring and check the desc, vdpa device
can access the available ring in the guest directly. With this patch,
we can achieve better throughput and lower CPU usage.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Port configuration fails because offload flags don't match the expected
value when max-pkt-len is set to a value that should enable receive port
offloading but doesn't.
The .dev_infos_get callback can be called before the configure callback.
At that time we don't know the maximum packet size yet because it is
only set up when ports are started. So in virtio_dev_info_get() just
always set the jumbo packet offload flag.
Check the maximum packet length at device configure time, because then we
have access to the max-pkt-len value provided by the user. If the
max-pkt-len exceeds the maximum MTU supported by the device we remove
the VIRTIO_NET_F_MTU flag from requested features.
Fixes: a4996bd89c ("ethdev: new Rx/Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Read barrier is required between reading the flags (desc_is_used)
and the content of descriptor to ensure the ordering.
Otherwise, speculative read of desc.id could be reordered with
reading of the desc.flags.
Fixes: a76290c8f1 ("net/virtio: implement Rx path for packed queues")
Cc: stable@dpdk.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
There should be read barrier between checking VIRTQUEUE_NUSED (reading
the used->idx) and reading these descriptors. It's done for the first
checks at the beginning of these functions but missed while checking
for extra required descriptors.
Fixes: e5f456a98d ("net/virtio: support in-order Rx and Tx")
Fixes: 13ce5e7eb9 ("virtio: mergeable buffers")
Cc: stable@dpdk.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Read barrier must be implied between reading descriptor flags
and descriptor id. Otherwise, in case of reordering, we could
read wrong descriptor id.
For the reference, similar barrier for split rings is the read
barrier between VIRTQUEUE_NUSED (reading the used->idx) and
the call to the virtio_xmit_cleanup().
Additionally removed double update of 'used_idx'. It's enough
to set it in the end of the loop.
Fixes: 892dc798fa ("net/virtio: implement Tx path for packed queues")
Cc: stable@dpdk.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Reviewed-by: Jens Freimann <jfreimann@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Move duplicate macro to increment per-event type stats to
internal header. These stats are NIC family independent and
stored in generic event queue structure.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Include efx_mcdi.h from main internal header efx_impl.h directly
instead of indirect inclusion via family-specific header.
It avoids duplication and fixes Medford and Medford2 cases where
the header inclusion is lost.
Correctness is still guaranteed by checks in efx_check.h which
require EFSYS_OPT_MCDI for corresponding families and do not
allow to enable the option if no family requires it.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
