Validate the pointers in rxq before accessing them.
Otherwise it can cause a segfault.
Fixes: 657c2a7f1d ("net/bnxt: create aggregation rings when needed")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Set the PAM4 mask setting only when PAM4 signaling is enabled.
Setting it otherwise seems to result in link negotiation.
Also auto_pam4_link_speeds has been renamed to
auto_pam4_link_speed_mask to reflect its real usage.
Fixes: c23f9ded03 ("net/bnxt: support 200G PAM4 link")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Check for valid bit while scanning for hwrm_done completion
during ring teardown. Not checking the valid bit could cause a
ring overflow when we ring the doorbell.
Fixes: 4fb6ab3f86 ("net/bnxt: check flush status during ring free")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
When there is a change in the default VLAN of the VF,
FW sends the VF_CFG_CHANGE async event to the driver.
Upon receiving this async event, driver currently only queries
the FW using HWRM_FUNC_QCFG. But this is not enough.
Driver has to clean up the existing filter and recreate filters
so the FW can apply the default VLAN to the filter.
Fixes: 12213821a8 ("net/bnxt: register for more async events")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Refactor bnxt_stop_rxtx() for reuse.
By accepting rte_eth_dev as input, bnxt_stop_rxtx() can be used
in multiple scenarios such as representor devices.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
The HWRM_FUNC_QCAPS response indicates the maximum number
of multicast filters that can be supported by this function
on the RX side.
Fixed to use this value instead of the hard coded value 16.
Fixes: d69851df12 ("net/bnxt: support multicast filter and set MAC addr")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
This patch reverts the commit "5d47d06b2c83".
Revert this commit as it caused a regression on legacy chips.
On newer chips we use TruFlow based flow creation instead of
HWRM based flow creation.
Fixes: 5d47d06b2c ("net/bnxt: modify VNIC accounting")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
During the port start, driver ignores mark table allocation failure.
This could cause a segfault due to NULL pointer dereference in
bnxt_set_mark_in_mbuf(). Fix this by checking the pointer validity
before accessing it.
Fixes: b87abb2e55 ("net/bnxt: support marking packet")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Make these messages more specific.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
During reset recovery, fixed to set the fast-path pointers
only if recovery succeeds.
Fixes: 720b55ad27 ("net/bnxt: fix crash caused by error recovery")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
The Maximum number of receive mac addr is hard coded to 128
in the ethdev library(RTE_ETH_NUM_RECEIVE_MAC_ADDR).
But the bnxt devices support more than 128 unicast MAC filters
which could result in a segfault while user tries to add more
than 128 unicast MAC addresses to the port.
Fixes: a2033fda22 ("net/bnxt: fix number of MAC addresses for VMDq")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
During port start, driver calls bnxt_vlan_offload_set_op()
to program VLAN Filter/VLAN Strip setting to the HW. This
in turns add the vlan filters.
This results in a failure when bnxt_restore_filters() invokes
bnxt_restore_vlan_filters() during the recovery as the vlans are
already programmed.
Fix to ignore the error(-EEXIST).
Fixes: 151c8240ac ("net/bnxt: restore VLAN filters during reset recovery")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
During reset recovery, driver is not restoring the VNIC rss hash key.
It's generating a new random hash key which results in unexpected
RSS behavior after recovery. Fixed this by storing the VNIC RSS
configuration to a local struct and then applying the cached value
during the recovery.
Fixes: df6cd7c1f7 ("net/bnxt: handle reset notify async event from FW")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
When there are no active Rx queues(i.e when all queues have been
stopped), clear the RSS redirection table of the VNIC on Thor.
Fixes: 9b63c6fd70 ("net/bnxt: support Rx/Tx queue start/stop")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
During reset recovery, driver is not restoring the multicast
mac addresses. Added code to restore them during reset recovery.
Fixes: b02f1573cd ("net/bnxt: restore MAC filters during reset recovery")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Fix bnxt_dev_set_mc_addr_list_op.
Fix to cache the multicast mac addresses added to the port
to the driver private structure memory. Use this cached mc list
to program the FW.
This fixes an issue where multicast packets reception is
successful only if the multicast mac address of the packets
is the first one in the multicast address list of the port.
This is in preparation for another fix in the series.
Fixes: d69851df12 ("net/bnxt: support multicast filter and set MAC addr")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
When the xstats_names parameter to rte_eth_xstats_get_names()
is non-NULL and the size parameter is less than the required
number of entries, the driver must return the required size
without modifying (and over-running) the caller's xstats_names
array.
Update bnxt_dev_xstats_get_names_op() in accordance with this
requirement.
Fixes: bfb9c2260b ("net/bnxt: support xstats get/reset")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
A debug assertion in Single-Packet Receive Queue (SPRQ) mode
required all Rx mbufs to have a 128 byte headroom,
based on the assumption that rte_pktmbuf_init() sets it.
However, rte_pktmbuf_init() may set a smaller headroom
if the dataroom is insufficient, e.g. this is a natural case
for split buffer segments. The headroom can also be larger.
Only check the headroom size when vectored Rx routines
are used because they rely on it. Relax the assertion
to require sufficient headroom size, not an exact one.
Fixes: a0a45e8af7 ("net/mlx5: configure Rx queue for buffer split")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
When building with -Db_sanitize=thread, GCC gives a warning:
drivers/net/mlx5/mlx5_flow_meter.c: In function ‘mlx5_flow_meter_create’:
drivers/net/mlx5/mlx5_flow_meter.c:1170:33: warning: ‘legacy_fm’ may be
used uninitialized in this function [-Wmaybe-uninitialized]
This is a false-positive: legacy_fm is initialized and used
if and only if priv->sh->meter_aso_en is false.
Work around this by initializing legacy_fm to NULL.
Add an assertion before legacy_fm use in case the logic changes.
Fixes: 4443201863 ("net/mlx5: support meter creation with policy")
Cc: stable@dpdk.org
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Dmitry Kozlyuk <dkozlyuk@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Add support for the imissed counter using the DevX API on Windows.
imissed is queried by creating a queue counter for the port, attaching
it to all created RQs and querying the "out_of_buffer" field.
If the counter cannot be created, imissed will always report 0.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
When application creates several flows to match on GRE tunnel without
explicitly specifying GRE protocol type value in flow rules, PMD will
translate that to zero mask.
RDMA-CORE cannot distinguish between different inner flow types and
produces identical matchers for each zero mask.
The patch extracts inner header type from flow rule and forces it in
GRE protocol type, if application did not specify any.
Fixes: 84c406e745 ("net/mlx5: add flow translate function")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The PMD RSS expansion scheme by default compiles flow rules for all
flow item types that may branch out from a stub supplied
by application.
For example,
ETH can lead to VLAN, IPv4 or IPv6.
IPv4 can lead to UDP, TCP, IPv4 or IPv6.
If application explicitly specified next protocol type, expansion must
use that option only and not create flows with other protocol types.
The PMD ignored explicit next protocol values in GRE and VXLAN-GPE.
The patch updates RSS expansion for GRE and VXLAN-GPE with explicit
next protocol settings.
Fixes: c7870bfe09 ("ethdev: move RSS expansion code to mlx5 driver")
Cc: stable@dpdk.org
Signed-off-by: Gregory Etelson <getelson@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Fixed the assertion on the flags set in pkt->ol_flags for vectorized
MPRQ. With vectorized MPRQ the CQs are processed before copying the
MPRQ bufs so the valid assertion is that the expected flag is set and
not that the pkt->ol_flags equlas this flag alone.
Fixes: 0f20acbf5e ("net/mlx5: implement vectorized MPRQ burst")
Cc: stable@dpdk.org
Signed-off-by: Lior Margalit <lmargalit@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The rte_kvargs_parse function parses the arguments
"key=value,key=value,..." string and return an allocated structure that
contains a key/value list.
It enables also to send a key without value and updates the values in
the following ways:
- "key=value,key,..." - value is updated as NULL.
- "key=value,key=,..." - value is updated as "" (empty string).
Mlx5 PMDs use this function to parse, but they don't support key without
value. They send the value as an argument to strtol function.
When strtol gets NULL as a parameter it cause a crash, when it gets ""
(empty string) it returns 0.
Adds a check that will prevent an argument in these formats, and returns
an error for it.
Fixes: 8520992403 ("common/mlx5: share memory related devargs")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
In ASO objects creation (WQE, CQE and MR), socket number is given as
a parameter.
The selection was wrongly socket 0 hardcoded even if the user didn't
configure memory for this socket.
This patch replaces the selection to default socket (SOCKET_ID_ANY).
Fixes: f935ed4b64 ("net/mlx5: support flow hit action for aging")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The common drivers_probe function calls in a loop to all probe functions
for classes requested by the user. After it manages to probe them all,
it updates this on the device in the "classes_loaded" field.
If one of them fails, all those probed to it are remove using the
drivers_remove function. However, this function only releases the
classes in the "classes_loaded" field on the given device and misses the
newly probed classes.
This patch removes the condition from the release function, and ensures
that the caller function sends a more accurate parameter.
Fixes: 8a41f4decc ("common/mlx5: introduce layer for multiple class drivers")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Under the circumstance that `rx_tail` wrap back to zero
and the advance speed of `rx_tail` is greater than `rxrearm_start`,
`rx_tail` will catch up with `rxrearm_start` and surpass it.
This may cause some mbufs be reused by application.
So we need to make some restrictions to ensure that
`rx_tail` will not exceed `rxrearm_start`.
e.g.
RDH: 972 RDT: 991 rxrearm_nb: 991 rxrearm_start: 992 rx_tail: 959
RDH: 1004 RDT: 1023 rxrearm_nb: 991 rxrearm_start: 0 rx_tail: 991
RDH: 12 RDT: 31 rxrearm_nb: 991 rxrearm_start: 32 rx_tail: 1023
RDH: 31 RDT: 63 rxrearm_nb: 960 rxrearm_start: 64 rx_tail: 0
RDH: 95 RDT: 95 rxrearm_nb: 1016 rxrearm_start: 96 rx_tail: 88
RDH: 95 RDT: 127 rxrearm_nb: 991 rxrearm_start: 128 rx_tail: 95
...
RDH: 908 RDT: 927 rxrearm_nb: 991 rxrearm_start: 928 rx_tail: 895
RDH: 940 RDT: 959 rxrearm_nb: 991 rxrearm_start: 960 rx_tail: 927
RDH: 980 RDT: 991 rxrearm_nb: 991 rxrearm_start: 992 rx_tail: 959
RDH: 991 RDT: 991 rxrearm_nb: 1026 rxrearm_start: 992 rx_tail: 994
when `rx_tail` catches up with `rxrearm_start`,
2(994 - 992) mbufs be reused by application !
Bugzilla ID: 882
Fixes: 5a3cca3424 ("net/ixgbe: fix vector Rx")
Cc: stable@dpdk.org
Signed-off-by: Bin Zheng <zhengbin.89740@bytedance.com>
Acked-by: Leyi Rong <leyi.rong@intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Reviewed-by: Liang Ma <liangma@liangbit.com>
Apply segmentation offload when requested for non tunneled
packets e.g. IPsec transport mode.
Fixes: 1e728b0112 ("net/iavf: rework Tx path")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
The tunnel packets is missing some information after Tx forwarding.
In ice_txd_enable_offload, when set tunnel packet Tx checksum
offload enable, td_offset should be set with outer l2/l3 len instead
of inner l2/l3 len.
In ice_txd_enable_checksum, td_offset should also be set with outer
l3 len.
This patch fix the bug that the checksum engine can forward Ipv4/Ipv6
tunnel packets.
Fixes: 28f9002ab6 ("net/ice: add Tx AVX512 offload path")
Fixes: 17c7d0f9d6 ("net/ice: support basic Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Kevin Liu <kevinx.liu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When VF is reset, PF will change DCF state from ON to other state, if
flow creation, destroy, or redirect command is sent to DCF at this
time, it will fail.
This patch tracks DCF state and returns try-again error to caller when
DCF state is not ON.
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
This extra symbol '+' should be added when patch was reapplied, and the
compiler treats it as unsigned type, so the code still runs well.
Fixes: 8410842505 ("net/iavf: support asynchronous virtual channel message")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
Add missing capability for outer UDP Tx checksum.
Also fixed the feature list in ice_dcf.ini
Fixes: bf89db4409 ("net/ice: complete device info get in DCF")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
FDIR rules with masks are not supported in current code. Thus add
pattern check for IPv4/UDP/TCP/SCTP addr/port to terminate the FDIR
programming stage.
Fixes: 1b71ed2cdd ("net/ice: refactor flow pattern parser")
Cc: stable@dpdk.org
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds support to configure channel mask which will
be used by rte flow when adding flow rules on SDP interfaces.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
ROC changes to support setting channel mask for SDP interfaces.
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Expression "a && 1" is equivalent to just "a", so fix the accidental
inclusion of a literal in code.
Fixes: ec55c11879 ("net/qede: add infrastructure for debug data collection")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Devendra Singh Rawat <dsinghrawat@marvell.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Acked-by: Rasesh Mody <rmody@marvell.com>
Wait for XAQ pool to get filled with the freed pointers
before proceeding.
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Wait for SQB pool to get filled with the freed pointers
before proceeding.
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Add roc_npa_aura_op_available_wait() API which can be used to wait
until an NPA pool gets filled up to a certain count of pointers.
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Use arch_extension instead of .cpu directive in NPA assembly code
snippets. Using .cpu directive with generic causes it to override
the micro architecture selected by march,mcpu.
For example if march=armv8.5-a+crypto+sve2 provided then the .cpu
directive overrides it to generic+crypto+sve2, use arch_extension
to get the expected result.
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Before issuing the batch alloc, we clear the first word of
cache lines so that NPA can update the status. Make sure that
this line clear is flushed before the batch alloc is issued.
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When PLT_CACHE_LINE_SIZE is set to 64B, the memzone size reserved for
NPA stack could be a multiple of 64B. In such a case, when NDC SYNC
is initiated for the NPA LF, it could go and corrupt an additional
64B bytes as NDC flushes in multiples of ROC cache line size (128B).
So ensure that NPA stack size requested is a multiple of 128B.
Signed-off-by: Ashwin Sekhar T K <asekhar@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Fix the order in which layer flags and layer type fields
are parsed when dumping the MCAM data.
Fixes: 9869c39918 ("common/cnxk: support flow entry dump")
Cc: stable@dpdk.org
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
In Multi-Packet RQ creation, the user can choose the number of strides
and their size in bytes. The user updates it using specific devargs for
both of these parameters.
The above two parameters determine the size of the WQE which is actually
their product of multiplication.
If the user selects values that are not in the supported range, the PMD
changes them to default values. However, apart from the range
limitations for each parameter individually there is also a minimum
value on their multiplication. When the user selects values that their
multiplication are lower than minimum value, no adjustment is made and
the creation of the WQE fails.
This patch adds an adjustment in these cases as well. When the user
selects values whose multiplication is lower than the minimum, they are
replaced with the default values.
Fixes: ecb160456a ("net/mlx5: add device parameter for MPRQ stride size")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
In the striding RQ management there are two important parameters, the
size of the single stride in bytes and the number of strides.
Both the data-path structure and config structure keep the log of the
above parameters. However, in their names there is no mention that the
value is a log which may be misleading as if the fields represent the
values themselves.
This patch updates their names describing the values more accurately.
Fixes: ecb160456a ("net/mlx5: add device parameter for MPRQ stride size")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Some devices have a WQE size limit for striding RQ. On some newer
devices, this limitation is smaller and information on its size is
provided by the firmware.
This patch adds the attribute query from firmware: the minimum required
size of WQE buffer for striding RQ in granularity of Bytes.
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
The MAC addresses fields are 48 bit wide and are processed
by mlx5 PMD as two words. There the bug was introduced for
the offset, causing malfunction of MODIFY_FIELD action
with MAC address fields as source or destination and
with non zero field offset.
Fixes: 40c8fb1fd3 ("net/mlx5: update modify field action")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Any EAL memory allocation often goes through eal_get_virtual_area()
function, which will print a warning whenever the resulting allocation
didn't match the specified address requirements. This is useful for
when we have requested a specific base virtual address, to let the user
know that the mapping has deviated from that address.
However, on Linux, we also have a default base address that's there to
ensure better chances of successful secondary process initialization,
as well as higher likelihood of the virtual areas to fit inside the
IOMMU address width. Because of this default base address, there are
warnings printed even when no base address was explicitly requested,
which can be confusing to the user.
Emit this warning with debug level unless base address was explicitly
requested by the user.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
DMA module internal header files are currently being installed to the
prefix directory. This patch updates DMA meson config file to exclude
internal headers during install stage.
Fixes: 53f6d7328b ("dma/cnxk: create and initialize device on PCI probing")
Cc: stable@dpdk.org
Signed-off-by: Srikanth Yalavarthi <syalavarthi@marvell.com>
Acked-by: Radha Mohan Chintakuntla <radhac@marvell.com>
After a comment section was detected, passing to a new hunk was not seen
as ending the section and all subsequent hunks were ignored.
Fixes: 7413e7f2ae ("devtools: alert on new calls to exit from libs")
Cc: stable@dpdk.org
Reported-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: David Marchand <david.marchand@redhat.com>
