Memory allocated was not being released in any exit path.
Coverity issue: 195030
Fixes: 48e2255f1b ("net/nfp: add NSP support for HW link configuration")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
First, the received pointer was not checked before. Then the pointer
from malloc was not the one used in the existing check.
Coverity issue: 195027
Fixes: ad60bca348 ("net/nfp: read PF port MAC addr using NSP")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
We do not know how big can the BAR be, but we know anything less
than 1MB is an error. This BAR needs to be big enough for accessing
most of NFP internals.
Coverity issue: 195024
Fixes: d12206e005 ("net/nfp: add NSP user space interface")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
The fstat function could return a value that indicates an error condition.
If this is not checked, the error condition may not be handled correctly.
Coverity issue: 195019
Fixes: f37d8a4b67 ("net/nfp: add NSP FW upload command")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
File descriptor is not released in any potential exit path
inside the function.
Coverity issue: 195018
Fixes: f37d8a4b67 ("net/nfp: add NSP FW upload command")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
If the function actually returns a null value, a null pointer
dereference will occur.
Coverity issue: 195013
Fixes: dd63df2bff ("net/nfp: add NSP symbol resolution command")
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Not all struct fields will be written and random data could
confuse readers.
Coverity issue: 140755
Fixes: 92aa491b88 ("nfp: add statistics")
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Fixes: 97cb466d65 ("mbuf: use 2 bytes for port and nb segments")
Cc: stable@dpdk.org
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When deleting/replacing a flow director rule the first rule of the list
was always the one replaced instead of the corresponding one.
Fixes: 4c3e9bcdd5 ("net/mlx5: support flow director")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
This patch improves Rx packet type offload report in case the device is
a virtual function device.
In these devices we observed that the L2 tunnel flag is set also for
non-tunneled packets, this leads to a complete misinterpretation of the
packet type being received.
This issue occurs since the tunnel_mode is not set to 0x7 by the driver
for virtual devices and therefore the value in the L2 tunnel flag is
meaningless and should be ignored.
Fixes: aee4a03fee ("net/mlx4: enhance Rx packet type offloads")
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When Rx interrupt is not enabled, there is no need to check if interrupt
allow others. It will cause VF cannot forwarding packets issue. This patch
fixes this issue.
Fixes: 96a9fd03c2 ("net/i40e: fix Rx queue interrupt mapping in VF")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Fixes: c261d1431b ("security: introduce security API and framework")
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
On SUSE11 with gcc 4.5.1 the following build error occurred,
most likely because of improper handling of annonymous unions:
examples/ipsec-secgw/ipsec.c:87:4 error:
unknown field ‘ipsec’ specified in initializer
Fixes: ec17993a14 ("examples/ipsec-secgw: support security offload")
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reset device during init and close if bound to igb_uio.
Fixes: 369db3ae8e ("igb_uio: remove device reset in release")
Cc: stable@dpdk.org
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
The net PMD overview table is big and required to be shrunk.
The crypto PMD tables had variable column sizes: the latest
columns were smaller.
The minimum width is set to 0.9em without any forced padding.
The maximum width is set to 2em.
The width of the first column set by sphinx is overridden to 0
for full elasticity.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: John McNamara <john.mcnamara@intel.com>
Since the release notes has a new section for removed items,
the dom0 removal notice can be moved there.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
A new library of the IPsec Multi-buffer library has been
released (0.47), which is used by the AESNI GCM PMD.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch fixes a trivial typo in DPDK programmer's guide:
it should be rte_cpu_get_features() instead of rte_cpu_get_feature().
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Fix null pointer dereferences in qede_vxlan_enable() and
qede_conf_udp_dst_port()
Coverity issue: 195010, 195012, 198439
Fixes: e0947ed912 ("net/qede: add support for VXLAN UDP port config over VF")
Fixes: 739a5b2f2b ("net/qede/base: use passed ptt handler")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Fix division by zero in calculating the regpair elements per page
Remove unused API ecore_cxt_free_proto_ilt()
Coverity issue: 1379423, 1379428
Fixes: 22d07d939c ("net/qede/base: update")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Appropriately release the ptt[PF translation table] handler that is
acquired in error case
Fixes: e0947ed912 ("net/qede: add support for VXLAN UDP port config over VF")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
8ea656f8c app/testpmd: request link status interrupt
requires QEDE PMD to populate the device link structure without
having to query the driver for link status change event.
This patch updates the device link structure when link status event is
received.
Remove unused param from qed_link_update()
Fixes: 86a2265e59 ("qede: add SRIOV support")
Fixes: ec94dbc573 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Initialize ucast parameters before checking if filters exists.
Fixes: e0947ed912 ("net/qede: add support for VXLAN UDP port config over VF")
Signed-off-by: Harish Patil <harish.patil@cavium.com>
Provide a knob to control per-VF Tx switching feature by adding a config
option, CONFIG_RTE_LIBRTE_QEDE_VF_TX_SWITCH. By default, it will be kept
in disabled state for better performance with small sized frames.
Fixes: 2ea6f76aff ("qede: add core driver")
Cc: stable@dpdk.org
Signed-off-by: Harish Patil <harish.patil@cavium.com>
If tunneled bit is set in the HW descriptor, the l4_hdr_type bits
describe the inner packet.
Fixes: ea16068c00 ("net/mlx5: fix L4 packet type support")
Cc: stable@dpdk.org
Reported-by: Xueming Li <xuemingl@mellanox.com>
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Removing a flow director rule with a drop action ends by not removing it
due to a missing verbs drop specification in the conversion process between
the flow director and generic flow API.
Fixes: 4c3e9bcdd5 ("net/mlx5: support flow director")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
More error reported for device reset in release() [1],
when device pass-through to the guest, host kernel crash on guest exit.
Removing the reset completely.
This is close to reverting commit b58eedfc7d [2], taking into account
previous fix to remove reset in open as well [3], but not exactly same.
With latest code, interrupts are enabled in uio open() callback and
disabled in uio release() callback, so when a DPDK application exit
device interrupts are disabled. Previously interrupts were only enabled
once in igb_uio module insert and disabled in module removal.
Also with latest code device set as bus master in open() and master
cleared in release(), clearing bus master should prevent further DMA
which was one of the target of the initial patch.
The initial intention was also to reset the device to be sure it has
been left in proper state, but currently that part is missing because of
reported problem(s).
Still igb_uio should be safer comparing to the pre b58eedfc7d state.
[1]
http://dpdk.org/ml/archives/dev/2017-November/081459.html
[2]
b58eedfc7d ("igb_uio: issue FLR during open and release of device file")
[3]
f73b38e924 ("igb_uio: remove device reset in open")
Fixes: e3a64deae2 ("igb_uio: prevent reset for bnx2x devices")
Fixes: b58eedfc7d ("igb_uio: issue FLR during open and release of device file")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
This is a wrapper to Linux kernel get_maintainer.pl file and only
supports parsing MAINTAINERS file (no git fallback etc..)
Requires DPDK_GETMAINTAINER_PATH devel config option set, please check
devtools/load-devel-config.
DPDK_GETMAINTAINER_PATH should be full path to the get_maintainer.pl
script, like:
DPDK_GETMAINTAINER_PATH=~/linux/scripts/get_maintainer.pl
Can be used individually:
./devtools/get-maintainer.sh <my.patch>
Or via git send-email, to add maintainers automatically:
git send-email --to-cmd ./devtools/get-maintainer.sh \
--cc dev@dpdk.org HEAD -4
Currently there is an ugly workaround to be able to use Linux script out
of the kernel tree, later better method can replace it.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
The initial version of the script had some limitations:
- cannot work on a non-clean workspace
- environment variables are not documented
- no compilation log in case of failure
- return success even it abi is incompatible
This patch addresses these issues and rework the code.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The Mellanox drivers were requiring MOFED at compilation time.
It is now possible to use the upstream rdma-core package.
So the dependency option is renamed in the build tool.
Fixes: 43e9d9794c ("net/mlx5: support upstream rdma-core")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
When using Python 3, dpdk-devbind.py fails to detect modules other than
igb_uio.
Fixes: bb9f408550 ("tools: support binding to built-in kernel modules")
Signed-off-by: Omri Mor <omrimor2@illinois.edu>
In func locate_pmd_entries(), pointer 'new' returned from call to func
'calloc' may be NULL. It is dereferenced without null point check.
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
The eventdev API was introduced in DPDK 17.05 release.
Since then it
- has been reviewed and iterated for 17.08, 17.11 releases
- three drivers were implemented using the API.
- introduced another subsystem like service core and ethdev-eventdev Rx
adapter APIs to abstract the difference between HW and SW
eventdev implementations in a transparent way.
- had extensive use by the app/test-eventdev/ and
examples/eventdev_pipeline_sw_pmd/
I believe the API is now stable and the EXPERIMENTAL label
should be removed.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Gage Eads <gage.eads@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add programmer's guide doc to explain the use of the
Event Ethernet Rx Adapter library.
Signed-off-by: Nikhil Rao <nikhil.rao@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The Flow Classify Library Programmers Guide documents
librte_flow_classify.
The Flow Classify Sample Application Guide documents the
flow_classify sample application which is used to
demonstrate the use of the Flow Classify Library,
librte_flow_classify.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
As the rte_flow is a new complex module in the DPDK.
In order to ease developers in to using this feature
it was suggested to supply a simple howto doc.
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This application shows a simple usage of the
rte_flow API for hardware filtering offloading.
In this demo we are filtering specific IP to
specific target queue, while sending all the
rest of the packets to other queue.
Signed-off-by: Ori Kam <orika@mellanox.com>
All PCI functionality should be hidden from apps via the PCI bus driver,
the EAL and individual device drivers. Therefore remove the inclusion of
rte_pci.h from sample apps.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
