This patch enables configuring the outer TPID for double VLAN.
Note that all other TPID values, for single VLANs or inner VLAN in the
QinQ case, are read only.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
When using kernel PF and DPDK VF, when the PF driver finds the link
state changes, up -> down or down -> up, the driver will send a
message to VF by mailbox. This link state change may be
triggered by PHY disconnection/reconnection, user config change
like *ifconfig down/up* or interface parameter, like MTU change.
This patch enables the support of the mailbox interrupt,
so VF driver can receive the message for link up/down.
After VF receives this message, VF port need to be reset to
recover. This needs to be handled by the application so this patch
allows the app to register a reset callback so it can reset the VF port.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
GCC_VERSION is empty in case of clang:
/bin/sh: line 0: test: -ge: unary operator expected
It is the same issue as http://dpdk.org/dev/patchwork/patch/5994/
Fixes: 366113dbfb ("e1000: suppress misleading indentation warning")
Signed-off-by: Hiroyuki Mikita <h.mikita89@gmail.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The current extended ethernet statistics fetching involve doing several
string operations, which causes performance issues if there are lots of
statistics and/or network interfaces. This patch changes the test-pmd
and proc_info applications to use the new xstats API, and removes
deprecated code associated with the old API.
Signed-off-by: Remy Horton <remy.horton@intel.com>
The current extended ethernet statistics fetching involve doing several
string operations, which causes performance issues if there are lots of
statistics and/or network interfaces. This patch changes the e1000 driver
to use the new API that seperates name string and value queries.
Signed-off-by: Remy Horton <remy.horton@intel.com>
The behavior of PKT_RX_VLAN_PKT was not very well defined, resulting in
PMDs not advertising the same flags in similar conditions.
Following discussion in [1], introduce 2 new flags PKT_RX_VLAN_STRIPPED
and PKT_RX_QINQ_STRIPPED that are better defined:
PKT_RX_VLAN_STRIPPED: a vlan has been stripped by the hardware and its
tci is saved in mbuf->vlan_tci. This can only happen if vlan stripping
is enabled in the RX configuration of the PMD.
For now, the old flag PKT_RX_VLAN_PKT is kept but marked as deprecated.
It should be removed from applications and PMDs in a future revision.
This patch also updates the drivers. For PKT_RX_VLAN_PKT:
- e1000, enic, i40e, mlx5, nfp, vmxnet3: done, PKT_RX_VLAN_PKT already
had the same meaning than PKT_RX_VLAN_STRIPPED, minor update is
required.
- fm10k: done, PKT_RX_VLAN_PKT already had the same meaning than
PKT_RX_VLAN_STRIPPED, and vlan stripping is always enabled on fm10k.
- ixgbe: modification done (vector and normal), the old flag was set
when a vlan was recognized, even if vlan stripping was disabled.
- the other drivers do not support vlan stripping.
For PKT_RX_QINQ_PKT, it was only supported on i40e, and the behavior was
already correct, so we can reuse the same bit value for
PKT_RX_QINQ_STRIPPED.
[1] http://dpdk.org/ml/archives/dev/2016-April/037837.html,
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Removed comparison against $CC in Makefiles as
in cross-compiling mode CC can be a different string
instead of string "gcc"
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Many drivers provide their own implementation of rte_mbuf_raw_alloc(),
duplicating the code. Introduce a new public function in rte_mbuf to
allocate a raw mbuf (uninitialized).
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Some statistics were deprecated since release 2.1 (49f386542a).
The last deprecated counter to be used was imcasts.
The VF loopback statistics are also removed as they are used only
in igb and duplicated in extended statistics.
The new counters should be added to extended statistics.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
A problem is found on i350 VF. We found TX will happen once
per 4 packets. If only 1~3 packets are received, they will
not be forwarded. But the real problem is on RX side. The
reason is the default RX write-back threshold is changed to
4, so every first 3 packets may be hung there.
This patch checks the RX wthresh when setting up the RX
queue, and forces it to be 1, so every packet can be handled
immediately.
Fixes: 4a41c17dba ("igb: set default thresholds based on MAC type")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch redesigns the API to set the link speed/s configuration
of an ethernet port. Specifically:
- it allows to define a set of advertised speeds for
auto-negociation.
- it allows to disable link auto-negociation (single fixed speed).
- default: auto-negociate all supported speeds.
A flag autoneg in struct rte_eth_link indicates if link speed was a
result of auto-negociation or was fixed by configuration.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The speed capabilities of a device can be retrieved with
rte_eth_dev_info_get().
The new field speed_capa is initialized in the drivers without
taking care of device characteristics in this patch.
When the capabilities of a driver are accurate, the table in
overview.rst must be filled.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
The speed numbers ETH_LINK_SPEED_ are renamed ETH_SPEED_NUM_.
The prefix ETH_LINK_SPEED_ is kept for AUTONEG and will be used
for bit flags in next patch.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Some duplex values are replaced from 0 to half-duplex when link is down.
Some drivers are still using their own constants for duplex modes.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Define and use ETH_LINK_UP and ETH_LINK_DOWN where appropriate.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tell the compiler to use an unsigned constant for the config shifts.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
The device lsc interrupt check has a misleading whitespace around it which
can be improved by adding appropriate braces to the check. Since the ret
variable was checked after previous assignment, this introduces no functional
change.
Fixes: 921a72008f ("e1000: add Rx interrupt handler")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
The register read/write mphy functions have misleading whitespace around
the `locked` check. This cleanup merely preserves the existing functionality
and suppresses future gcc versions' "misleading indentation" warning.
Suggested-by: Panu Matilainen <pmatilai@redhat.com>
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
On the 82575 chipset, there is a pool of global TX contexts instead of 2
per queues on 82576. See Table A-1 "Changes in Programming Interface
Relative to 82575" of Intel® 82576EB GbE Controller datasheet (*).
In the driver, the contexts are attributed to a TX queue: 0-1 for txq0,
2-3 for txq1, and so on.
In igbe_set_xmit_ctx(), the variable ctx_curr contains the index of the
per-queue context (0 or 1), and ctx_idx contains the index to be given
to the hardware (0 to 7). The size of txq->ctx_cache[] is 2, and must
be indexed with ctx_curr to avoid an out-of-bound access.
Also, the index returned by what_advctx_update() is the per-queue
index (0 or 1), so we need to add txq->ctx_start before sending it
to the hardware.
(*) The datasheets says 16 global contexts, however the IDX fields in TX
descriptors are 3 bits, which gives a total of 8 contexts. The
driver assumes there are 8 contexts on 82575: 2 per queues, 4 txqs.
Fixes: 4c8db5f09a ("igb: enable TSO support")
Fixes: af75078fec ("first public release")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
In the function set_rx_mode, the pointer of device data points
to the wrong address as found in ixgbe code, and fixed in commit:
"ixgbe: fix PF promiscuous mode after VF closed"
Fixes: be2d648a2d ("igb: add PF support")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add a new API rte_eth_dev_get_supported_ptypes to query what packet types
can be filled by a given device. The device should be already started or
its PMD RX burst function already decided, since the packet types supported
may vary depending on RX function.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Comment for "ierrors" counter says that it counts erroneous received
packets. But for some reason "imissed" counter is added to "ierrors"
counter in most drivers.
It is a mistake, because missed packets are obviously not received.
This patch fixes it.
Fixes: 70bdb18657 ("ethdev: add Rx error counters for missed, badcrc and badlen packets")
Fixes: 6bfe648406 ("i40e: add Rx error statistics")
Fixes: 856505d303 ("cxgbe: add port statistics")
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This brings the DPDK igb driver inline with the behavior used by
the current Linux driver. The IGB hardware has several different
MAC types and the threshold values that work vary based on the hardware.
Since DPDK 1.8 it has been up to devices to provide the correct default
configuration parameter. But the igb driver gives values that are broken
on some devices, and always causes a warning message at startup.
Please test this on real hardware, I don't have the luxury of a
hardware lab full of variations of this chip.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Allow reprogramming of the RAR with a zero mac address,
to ensure that the VF traffic goes to the PF after
stop, close and detach of the VF.
Fixes: be2d648a2d ("igb: add PF support")
Fixes: d82170d279 ("igb: add VF support")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Enable promiscuous and allmulticast mode control from the VF using
rte_eth_promiscuous_enable()/rte_eth_promiscuous_disable() and
rte_eth_allmulticast_enable()/rte_eth_allmulticast_disable().
For promiscuous mode host/PF igb driver should be built with
IGB_ENABLE_VF_PROMISC.
For allmulticast mode "allmulti" flag should be set for appropriate PF
ifconfig eth0 allmulti
Signed-off-by: Yury Kylulin <yury.kylulin@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Modified driver and eal code to support I217 and I218 Intel NICs.
Compiled and tested (via testpmd) on Ubuntu 14.04 for target
x86_64-native-linuxapp-gcc
Compiled for target x86_64-native-linuxapp-clang
Signed-off-by: Ravi Kerur <rkerur@gmail.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In order to set ether type of VLAN for single VLAN, inner
and outer VLAN, the VLAN type as an input parameter is added
to 'rte_eth_dev_set_vlan_ether_type()'.
In addition, corresponding changes in e1000, ixgbe and i40e
are also added.
It is an ABI break but ethdev library is already bumped for 16.04.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Macros RTE_MBUF_DATA_DMA_ADDR and RTE_MBUF_DATA_DMA_ADDR_DEFAULT
are defined in each PMD driver file. Convert macros to inline
functions and move them to common lib/librte_mbuf/rte_mbuf.h file.
PMD drivers include rte_mbuf.h file directly/indirectly hence no
additioanl header file inclusion is necessary.
Signed-off-by: Ravi Kerur <rkerur@gmail.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
fix the error reported by checkpatch:
"ERROR: return is not a function, parentheses are not required"
remove parentheses in return like:
"return (logical expressions)"
remove parentheses in return a function like:
"return (rte_mempool_lookup(...))"
Fixes: 6307b909b8 ("lib: remove extra parenthesis after return")
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
There is a compilation issue with some compilers.
In i686 platform, long is 32bit, so XXX_CYCLECOUNTER_MASK
need define as 'ULL'
Fixes: 9c857bf6be ("igb: support ieee1588 functions for device time")
Fixes: 1c4445e1f2 ("ixgbe: support ieee1588 functions for device time")
Fixes: f3a4e40eca ("i40e: support ieee1588 functions for device time")
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
If use DPDK PF + DPDK VF on igb NICs, we find the MAC address of VF
port is always 0. Because we forget to give it a value if this MAC
address is not assigned by PF. This patch'll assign a random MAC
address to igb VF port as ixgbe does.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The vector number may change during 'dev_start'.
Before enabling a new vector mapping,
it's necessary to disable/unmap the previous setting.
Fixes: fe685de2b1 ("igb: fix VF start with PF stopped")
Reported-by: Yong Liu <yong.liu@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch removes the crc bytes from byte counter statistics.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This fixes a bug added to em and igb drivers which causes the pci info
seen by the primary process to become invalidated by secondary process
startup.
This call was added after the process type check in the other drivers.
Fixes: eeefe73f0a ("drivers: copy PCI device info to ethdev data")
Signed-off-by: Jon DeVree <nuxi@vault24.org>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add additional functions to support the existing IEEE1588
functionality and to enable getting, setting and adjusting
the device time.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Reviewed-by: John McNamara <john.mcnamara@intel.com>
Use common code to handle Xen support at runtime.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Once posted through mailbox, we must check for nack from the PF
and report an error in this case.
Signed-off-by: Julien Meunier <julien.meunier@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When igb runs as a PF, mbox interrupt is prerequisite to make VF
start normally.
And PF sometimes won't 'dev_start', so the mbox interrupt register
during 'dev_init' is required.
The patch rolls back the interrupt register for mbox,lsc to the 'dev_init'.
As UIO doesn't support multiple vector, mbox has to occupy the only one.
It adds condition check on 'dev_start', rxq interrupt is not allowed
when PF running in IOV mode via UIO.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
According to the VFIO interrupt mapping, the interrupt vector id
for rxq starts from RX_VEC_START.
It doesn't impact the UIO cases.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Use new function rte_eth_copy_pci_info.
Copy device info for the following pdevs:
bnx2x
cxgbe
e1000
enic
fm10k
i40e
ixgbe
mlx4
mlx5
virtio
vmxnet3
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add xstats_get() and xstats_reset() functions to igb
driver, and the necessary strings to expose these
NIC statistics.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Maryam Tahhan <maryam.tahhan@intel.com>
Different NIC has its specific constraint on the multi-queue
configuration, so move the checking from ethdev lib to drivers.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
When datapath rxq interrupt is enabled, enable related device rxq.
Remove the interrupt handler after device stopped.
e1000 only support one type of interrupt cause, so remove lsc interrupt
handler if rxq enabled.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Enable rx interrupt support on e1000 physical and emulated device.
Implement rxq interrupt related functions in eth_dev_ops structure.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Separate lsc and rxq interrupt for they have different interrupt handlers.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
