Add CLI to set TCs' min bandwidth on a specific VF
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add CLI to set a specific VF's TX max bandwidth
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Set some TCs to strict priority mode.
It's a global setting on a physical port.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Set a specific TC's max bandwidth on a VF.
User can call the API to set VF TC's max bandwidth
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Allocate all TCs' relative bandwidth (percentage) on
a specific VF.
It can be taken as relative min bandwidth setting.
User can call the API to set VF TC's min bandwidth
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Support setting VF max bandwidth from PF.
User can call the API on PF to set a specific VF's
max bandwidth.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
As tap is a virtual device, there's no physical way a link can be cut.
However, it has an associated kernel netdevice and possibly a remote
netdevice too. These netdevices link status may change outside of the
DPDK scope, through an external command such as:
ip link set dev tapX down
This commit implements link status notification through netlink.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
By default, a tap netdevice is of no use when not fed by a separate
process. The ability to automatically feed it from another netdevice
allows applications to capture any kind of traffic normally destined to
the kernel stack.
This patch implements this ability through a new optional "remote"
parameter.
Packets matching filtering rules created with the flow API are matched
on the remote device and redirected to the tap PMD, where the relevant
action will be performed.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Supported flow rules are now mapped to TC rules on the tap netdevice.
The netlink message used for creating the TC rule is stored in struct
rte_flow. That way, by simply changing a metadata in it, we can require
for the rule deletion without further parsing.
Supported items:
- eth: src and dst (with variable masks), and eth_type (0xffff mask).
- vlan: vid, pcp, tpid, but not eid.
- ipv4/6: src and dst (with variable masks), and ip_proto (0xffff mask).
- udp/tcp: src and dst port (0xffff) mask.
Supported actions:
- DROP
- QUEUE
- PASSTHRU
It is generally not possible to provide a "last" item. However, if the
"last" item, once masked, is identical to the masked spec, then it is
supported.
Only IPv4/6 and MAC addresses can use a variable mask. All other
items need a full mask (exact match).
Support for VLAN requires kernel headers >= 4.9, checked using
auto-config.sh.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
The flow API provides the ability to classify packets received by a tap
netdevice.
This patch only implements skeleton functions for flow API support, no
patterns are supported yet.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Split control and datapath to make datapath substitutable and
possibly reusable with alternative control path.
libefx-based Tx datapath is bound to libefx control path, but
it should be possible to use other datapaths with alternative
control path(s).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Split control and datapath to make datapath substitutable and
possibly reusable with alternative control path.
libefx-based Rx datapath is bound to libefx control path, but
other datapaths should be possible to use with alternative
control path(s).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Enable Thunderx nicvf PMD driver in the common
config as it does not have build dependency
with any external library and/or architecture.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
ConnectX-5 supports enhanced version of multi-packet send (MPS). An MPS Tx
descriptor can carry multiple packets either by including pointers of
packets or by inlining packets. Inlining packet data can be helpful to
better utilize PCIe bandwidth. In addition, Enhanced MPS supports hybrid
mode - mixing inlined packets and pointers in a descriptor. This feature is
enabled by default if supported by HW.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
A tap netdevice does not support flow control; ensure nothing but
RTE_FC_NONE mode can be set.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
A tap netdevice actually receives every packet, without any filtering
whatsoever. There is no need for any multicast address registration
to receive multicast packets.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The MTU is assigned to the tap netdevice according to the argument, but
packet transmission and reception just write/read on an fd with the
default limit being the socket buffer size.
As a new rte_eth_dev_data is allocated during tap device init, ensure it
is set again dev->data->mtu.
Once the actual netdevice is created via tun_alloc(), make sure to apply
the desired MTU to the netdevice.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
As soon as the netdevice is created, update pmd->mac_addr with its
actual MAC address.
Signed-off-by: Pascal Mazon <pascal.mazon@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
The patch is to make MAC statistics update interval tunable
by means of 'stats_update_period_ms' kvarg parameter making
it possible to use values different from 1000 ms in case of
SFN8xxx boards provided that firmware version is 6.2.1.1033
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Support individual/group destination address match (unknown unicast
and all-multicast correspondingly in terms of firmware).
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Exact match of source and destination ports is supported by parser.
IP protocol match is enforced to UDP.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Exact match of source and destination ports is supported by parser.
IP protocol match is enforced to TCP.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Exact match of IP protocol, source and destination
addresses is supported by parser.
EtherType match is enforced to IPv6 EtherType.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Exact match of IP protocol, source and destination
addresses is supported by parser.
EtherType match is enforced to IPv4 EtherType.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Exact match of VLAN ID bits is supported only and required in VLAN item.
Mask to match VLAN ID bits only is required, default mask to match entire
TCI is not supported.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Only pattern items VOID, ETH and actions VOID, QUEUE is now
supported.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
With all vmxnet3 version 3 changes incorporated in the vmxnet3 driver,
the driver can configure emulation to run at vmxnet3 version 3, provided
the emulation advertises support for version 3.
This patch also updates release notes.
Signed-off-by: Shrikrishna Khare <skhare@vmware.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Acked-by: Jin Heo <heoj@vmware.com>
Prior to this commit Tx checksum offload was supported only for the
inner headers.
This commit adds support for the hardware to compute the checksum for the
outer headers as well.
The support is for tunneling protocols GRE and VXLAN.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
* Add link block check for KR.
* Complete HW initialization even if SFP is not present.
* Add VF xcast promiscuous mode.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch enables i40e driver in PowerPC along with its altivec
intrinsic support.
Signed-off-by: Gowrishankar Muthukrishnan <gowrishankar.m@linux.vnet.ibm.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Add KNI PMD which wraps librte_kni for ease of use.
KNI PMD can be used as any regular PMD to send / receive packets to the
Linux networking stack.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Yong Wang <yongwang@vmware.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Fixes: 0ba3870e75 ("doc: add guide to use virtio-user as exceptional path")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: John McNamara <john.mcnamara@intel.com>
Update the document with the available EAL command
line option to install the pmd drivers that are built
as shared libraries.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Current device hotplug is just supported by UIO managed devices.
This patch adds same functionality with VFIO.
It has been validated through tests using IOMMU and also with
VFIO and no-iommu mode.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Since there is no "descriptor done" flag like on Intel drivers, the
approach is different on mlx5 driver.
- for Tx, we call txq_complete() to free descriptors processed by
the hw, then we check if the descriptor is between tail and head
- for Rx, we need to browse the cqes, managing compressed ones,
to get the number of used descriptors.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Introduce a new API to get the status of a descriptor.
For Rx, it is almost similar to rx_descriptor_done API, except it
differentiates "used" descriptors (which are hold by the driver and not
returned to the hardware).
For Tx, it is a new API.
The descriptor_done() API, and probably the rx_queue_count() API could
be replaced by this new API as soon as it is implemented on all PMDs.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Now that the enqueue function returns the amount of space in the ring,
we can use that to replace the old watermark functionality. Update the
example app to do so, and re-enable it in the examples Makefile.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add an extra parameter to the ring dequeue burst/bulk functions so that
those functions can optionally return the amount of remaining objs in the
ring. This information can be used by applications in a number of ways,
for instance, with single-consumer queues, it provides a max
dequeue size which is guaranteed to work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add an extra parameter to the ring enqueue burst/bulk functions so that
those functions can optionally return the amount of free space in the
ring. This information can be used by applications in a number of ways,
for instance, with single-producer queues, it provides a max
enqueue size which is guaranteed to work. It can also be used to
implement watermark functionality in apps, replacing the older
functionality with a more flexible version, which enables apps to
implement multiple watermark thresholds, rather than just one.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The bulk fns for rings returns 0 for all elements enqueued and negative
for no space. Change that to make them consistent with the burst functions
in returning the number of elements enqueued/dequeued, i.e. 0 or N.
This change also allows the return value from enq/deq to be used directly
without a branch for error checking.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Remove the watermark support. A future commit will add support for having
enqueue functions return the amount of free space in the ring, which will
allow applications to implement their own watermark checks, while also
being more useful to the app.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
There was a compile time setting to enable a ring to yield when
it entered a loop in mp or mc rings waiting for the tail pointer update.
Build time settings are not recommended for enabling/disabling features,
and since this was off by default, remove it completely. If needed, a
runtime enabled equivalent can be used.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The debug option only provided statistics to the user, most of
which could be tracked by the application itself. Remove this as a
compile time option, and feature, simplifying the code.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Users compiling DPDK should not need to know or care about the arrangement
of cachelines in the rte_ring structure. Therefore just remove the build
option and set the structures to be always split. On platforms with 64B
cachelines, for improved performance use 128B rather than 64B alignment
since it stops the producer and consumer data being on adjacent cachelines.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Changes in the thread layout described, with an updated diagram.
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add support to the vHostdriver for the new API to force free consumed
buffers on Tx ring. vHost does not cache the mbufs so there is no work
to do.
Signed-off-by: Billy McFall <bmcfall@redhat.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Add support to the e1000 igb driver for the new API to force free
consumed buffers on Tx ring. This API is independent of the tx_rs_thresh
setting. With this API, buffers should be free even if tx_rs_thresh is
not met.
e1000 igb driver does not implement a tx_rs_thresh to free mbufs, it
frees a slot in the ring as needed. However, it could be implemented at
some future date.
Signed-off-by: Billy McFall <bmcfall@redhat.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Add a new API to force free consumed buffers on Tx ring. API will return
the number of packets freed (0-n) or error code if feature not supported
(-ENOTSUP) or input invalid (-ENODEV).
Signed-off-by: Billy McFall <bmcfall@redhat.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Downstreams might want to provide different DPDK releases at the same
time to support multiple consumers of DPDK linked against older and newer
sonames.
Also due to the interdependencies that DPDK libraries can have applications
might end up with an executable space in which multiple versions of a
library are mapped by ld.so.
Think of LibA that got an ABI bump and LibB that did not get an ABI bump
but is depending on LibA.
Application
\-> LibA.old
\-> LibB.new -> LibA.new
That is a conflict which can be avoided by setting CONFIG_RTE_MAJOR_ABI.
If set CONFIG_RTE_MAJOR_ABI overwrites any LIBABIVER value.
An example might be ``CONFIG_RTE_MAJOR_ABI=16.11`` which will make all
libraries librte<?>.so.16.11 instead of librte<?>.so.<LIBABIVER>.
We need to cut arbitrary long stings after the .so now and this would work
for any ABI version in LIBABIVER:
$(Q)ln -s -f $< $(patsubst %.$(LIBABIVER),%,$@)
But using the following instead additionally allows to simplify the Make
File for the CONFIG_RTE_NEXT_ABI case.
$(Q)ln -s -f $< $(shell echo $@ | sed 's/\.so.*/.so/')
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Reviewed-by: Jan Blunck <jblunck@infradead.org>
Tested-by: Jan Blunck <jblunck@infradead.org>
This patch extend next_hop field from 8-bits to 21-bits in LPM library
for IPv6.
Added versioning symbols to functions and updated
library and applications that have a dependency on LPM library.
Signed-off-by: Vladyslav Buslov <vladyslav.buslov@harmonicinc.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
When possible, replace the uses of rte_mempool_create() with
the helper provided in librte_mbuf: rte_pktmbuf_pool_create().
This is the preferred way to create a mbuf pool.
This also updates the documentation.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add to the contributors guide the requirements and guidelines for
getting patches acked and merged. It details at what point the review
comments and the ack's need to be received in order to have a given
patch merged into a release.
These guidelines are as agreed by the DPDK technical board at the
meeting held on 2017-02-15.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The coremask option in DPDK is difficult to use and we should be
promoting the use of the corelist (-l) option. The patch
adjusts the docs to use -l EAL option instead of the -c option.
The patch only changes the docs and not the code as the -c option
will continue to exist unless it is removed in the future. The -c
option should be kept to maintain backward compatibility.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The variables DESTDIR and prefix are used with "make install"
to copy the files in $DESTDIR$prefix.
Their default values will be shown when calling "make help".
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Every cells of a driver column are painted in yellow.
The trick is to generate some empty content as a big column
above and below the pointed cell.
The position: relative attribute is used for the highlight position
but it makes the border to disappear.
The overflow: hidden attribute is used to mask the generated content
outside of the table.
The class .wy-nav-content has a background which masks the highlighting.
Setting an opacity lower than 1, creates a new stack context and let
the column highlight to be shown.
The background of odd rows was grey and opaque. It is redefined with
a transparent alpha ratio in order to see highlighting on such rows.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Every cells of a feature row are painted in yellow.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Some CSS alignments were not explicitly set.
The pointer is also set to default for the table.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
As announced in the deprecation notice, remove the functions for
single/multi producer/consumer enqueue/dequeue.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Add template release notes for DPDK 17.05 with inline
comments and explanations of the various sections.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Bruce Richardson <bruce.ricahrdson@intel.com>
A new parameter is planned to be added in 17.05 release in
rte_cryptodev_info.sym - max_nb_sessions_per_qp.
This will allow applications to know the maximum number of session
which can be attached to queue_pairs of device.
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
I made a vhost ABI/API refactoring at v16.04, meant to avoid such issue
forever. Well, apparently, I lied.
People are looking for more vhost-user options now days, other than
vhost-user net only. For example, SPDK (Storage Performance Development
Kit) are looking for chance of vhost-user SCSI and vhost-user block.
Apparently, they also need a vhost-user backend, while DPDK already
has a (mature enough) backend, they don't want to implement it again
from scratch. They want to leverage the one DPDK provides.
However, the last refactoring hasn't done that right, at least it's
not friendly for extending vhost-user to add more devices support.
For example, different virtio devices has its own feature set, while
APIs like rte_vhost_feature_disable(feature_mask) have no option to
tell the device type. Thus, a more proper API should look like:
rte_vhost_feature_disable(device_type, feature_mask);
Besides that, few public files and structures should be renamed, to
not let it bind to virtio-net. Specifically, they are:
- virtio_net_device_ops --> vhost_device_ops
- rte_virtio_net.h --> rte_vhost.h
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
In 17.05, nine rte_eth_dev_* functions for bypass control,
and implemented only in ixgbe, will be removed from ethdev,
renamed and moved to the ixgbe PMD-specific API.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
The change of _rte_eth_dev_callback_process has not been done in 17.02.
Let's postpone to 17.05.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Some vfio symbols need to be exported outside librte_eal.
For that, they need to be renamed to rte_* naming convention.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The new bus model has been proposed in 17.02 without being used.
The big rework should happen in 17.05.
Suggested-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Document proposed changes for the rings code in the next release.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The images by below two commits are very unclear. Fix it.
Fixes: 50665deebd ("doc: add guide to use virtio-user for container networking")
Fixes: 0ba3870e75 ("doc: add guide to use virtio-user as exceptional path")
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add some text and rearrange lists to make sure it is clear that the
tested platforms listed in the release notes are some combinations
of the items in each group.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add tested Intel platforms with Intel NICs to the release note.
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
These sections do not provide the exact tests that were done nor whether
specific NICs are supported by all platforms.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Given that the packet distributor library improvements (1) will
not be in 17.02, I plan on doing some consolidation of the
API for burst operation for 17.05, merging the two api's into
one, with options for single or burst operation.
(1) http://dpdk.org/dev/patchwork/patch/19911/
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The feature is part of 17.02, so the ABI changes notice can be removed.
Fixes: 4fb7e803eb ("ethdev: add Tx preparation")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
AES-NI MB PMD uses external Multi-Buffer library,
which is hosted in github, but the version was not specified
in the documentation.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Add limitations to use of the dpdk-test-crypto-perf
tool for hardware accelerator measurements
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Rx statistic is incorrect when packet is oversize.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The framework of the ixgbe doc is not appropriate,
adjust it.
Fixes: 972e365bfe ("doc: nics guide")
CC: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This ABI changes to remove iomem and ioport mapping in igb_uio. The
purpose of this changes was to fix a bug: when DPDK app crashes,
those devices by igb_uio are not stopped either DPDK PMD driver or
igb_uio driver.
Then it has been pointed out by Stephen Hemminger that it has
backward compatibility issue: cannot run old version DPDK on
modified igb_uio.
However, we still have not figure out a new way to fix this bug
without this change. Let's postpone this deprecation announcement
in case this change cannot be avoided.
Fixes: 3bac1dbc1e ("doc: announce iomem and ioport removal from igb_uio")
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, extended statistics has been supported by virtio. But there
are no corresponding document updates. Therefore, this patch is to update
the document for virtio xstats feature.
Fixes: 76d4c652e0 ("virtio: add extended stats")
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
These files are linked to API documentation as usage samples, list of
files created automatically during doc creation.
Remove manually updated old one.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add document explaining the current Stable and LTS process.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When bind the "uio_pci_generic" module in X710/XL710/XXV710,
the result is failed. The "uio_pci_generic" module is not
supported by X710/XL710/XXV710.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Remove RTE_LIBRTE_SFC_EFX_TSO config option since it is not
required any more:
- unreasonable limit on number of Tx queues when TSO is not
actually required should be solved using per-device parameter
- performance difference with and without TSO compiled in is small
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add documentation to describe using the new performance test application.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Adds the description of the cryptodev scheduler PMD overview,
limitations, build, instructions, modes, etc.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
To avoid confusion with distributor app, this commit
renames the flow-distributor sample app to server_node_efd,
since it shows how to use the EFD library and it is based
on a server/nodes model.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add two new commands "show port cap <port>" and "show
port cap all" to display what offload capabilities supported
in ports. It will not only display all the capabilities of
the port, but also the enabling condition for each capability
in the running time.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This enables ACL matches to return 0 where the distinction
from no-match case is not needed.
Signed-off-by: Michał Mirosław <michal.miroslaw@atendesoftware.pl>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add documentation about the driver and update
release notes.
Signed-off-by: Zbigniew Bodek <zbigniew.bodek@caviumnetworks.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add two new feature flags:
* RTE_CRYPTODEV_FF_CPU_NEON
represents ARM NEON (TM) instructions
* RTE_CRYPTODEV_FF_CPU_ARM_CE
represents ARM crypto extensions
Add them to both cryptodev library, documentation and relevant
PMD driver for ARMv8.
Signed-off-by: Zbigniew Bodek <zbigniew.bodek@caviumnetworks.com>
When ZUC PMD was added, it was not added in the
Crypto Device Supported Functionality Matrices.
This commit adds a column in all the matrices, plus
the ZUC EEA3/EIA3 algorithms.
Fixes: cf7685d68f ("crypto/zuc: add driver for ZUC library")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Current Cryptodev AES-NI GCM PMD is implemented using Multi Buffer
Crypto library.This patch reimplement the device using ISA-L Crypto
library: https://github.com/01org/isa-l_crypto.
The migration entailed the following additional support for:
* GMAC algorithm.
* 256-bit cipher key.
* Session-less mode.
* Out-of place processing
* Scatter-gatter support for chained mbufs (only out-of place and
destination mbuf must be contiguous)
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
The code section was lacking indentation to be be correctly formatted.
Fixes: d61f70b4c9 ("crypto/libcrypto: add driver for OpenSSL library")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Release v0.44 of Intel(R) Multi-Buffer Crypto for IPsec library adds
support for AVX512 instructions. This patch enables the new AVX512
accelerated functions from the aesni_mb_pmd crypto poll mode driver.
This patch set requires that the aesni_mb_pmd is linked against the
version 0.44 or greater of the Multi-Buffer Crypto for IPsec library.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
AESNI MB PMD supports SHA224-HMAC and SHA384-HMAC,
but the documentation was not updated with this.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Update driver to use new AESNI Multibuffer IPSec library single
operation functionality (cipher only and authentication only).
This patch also adds tests for this new feature.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
The Intel(R) Multi Buffer Crypto library used in the AESNI MB PMD
has been moved to a new repository, in github.
This patch updates the link where it can be downloaded.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Extended functional AES-CBC and AES-CTR cipher-only
tests to run on QAT PMD.
Added AES_CBC cipher-only performance tests on QAT PMD.
No driver changes, but as now tested, QAT documentation
is updated to remove constraint.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Signed-off-by: Sameh Gobriel <sameh.gobriel@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Christian Maciocco <christian.maciocco@intel.com>
This new sample app, based on the client/server sample app,
shows the user an scenario using the EFD library.
It consists of:
- A front-end server which has an EFD table that stores the
node id for each flow key, which will distribute the incoming
packets to the different nodes
- A back-end node, which has a hash table where node checks,
after reading packets coming from the server, whether the packet
is meant to be used in such node, in which case it will be TXed,
or not, in which case, packet will be dropped.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Saikrishna Edupuganti <saikrishna.edupuganti@intel.com>
Acked-by: Christian Maciocco <christian.maciocco@intel.com>
Elastic Flow Distributor (EFD) is a distributor library that uses
perfect hashing to determine a target/value for a given incoming flow key.
It has the following advantages:
- First, because it uses perfect hashing, it does not store
the key itself and hence lookup performance is not dependent
on the key size.
- Second, the target/value can be any arbitrary value hence
the system designer and/or operator can better optimize service rates
and inter-cluster network traffic locating.
- Third, since the storage requirement is much smaller than a hash-based
flow table (i.e. better fit for CPU cache), EFD can scale to
millions of flow keys.
Finally, with current optimized library implementation performance
is fully scalable with number of CPU cores.
Signed-off-by: Byron Marohn <byron.marohn@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Saikrishna Edupuganti <saikrishna.edupuganti@intel.com>
Acked-by: Christian Maciocco <christian.maciocco@intel.com>
This commit introduces 8-bit, 16-bit, 32bit, 64bit I/O device
memory read/write operations along with the relaxed versions.
The weakly-ordered machine like ARM needs additional I/O barrier for
device memory read/write access over PCI bus.
By introducing the eal abstraction for I/O device memory read/write access,
The drivers can access I/O device memory in architecture agnostic manner.
The relaxed version does not have additional I/O memory barrier, useful in
accessing the device registers of integrated controllers which
implicitly strongly ordered with respect to memory access.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Because using a NFP PMD requires specific BSP installed, the PMD
support was not the default option before. This was just for making
people aware of such dependency, since there is no need for such a
BSP for just compiling DPDK with NFP PMD support.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Update the doc and release note.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
command is: set vf vlan tag port_id vf_id on|off
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add command to call rte_pmd_i40e_set_vf_broadcast.
Add set vf broadcast in testpmd_funcs.rst file.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add testpmd CLI to set VF multicast promiscuous mode on i40e.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add testpmd CLI to set VF unicast promiscuous mode on i40e.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
The enic TSO implementation requires that the length of the Eth/IP/TCP
headers be passed to the NIC. Other than that, it's just a matter of
setting the mss and offload mode on a per packet basis.
In TSO mode, IP and TCP checksums are offloaded even if not requested
with mb->ol_flags.
Signed-off-by: John Daley <johndale@cisco.com>
Add PCI device ID for ConnectX-5 and enable multi-packet send for PF and VF
along with changing documentation and release note.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add support for 8.14.x.x firmware.
The new firmware adds support for external PHY BCM8485x; configures
fixed link speed with transceiver/cable not supporting negotiation;
supports engine swap; supports overriding PCIe preset equalization
value; checks pause too long for ports and reads die temperature
every second for shutdown threshold.
It includes change in FLR flow when there is a SW initiated FLR.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
This patch implements NFP PMD support for TSO but it also requires
a firmware advertising the capability.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
NFP supports more speeds than just 40 and 100GB, which were
what was advertised before.
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Mark Spender <mspender@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Extract RSS hash provided by the HW in the prefix and put it to mbuf.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
IPv4 header and TCP/UDP checksums for both IPv4 and IPv6 are supported.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Does not implement any deprecated statistics.
No per-queue statistics yet.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Supported options are auto (based on NIC firmware variant and
installed licences), throughput, low-latency.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Robert Stonehouse <rstonehouse@solarflare.com>
The PMD allows for DPDK and the host to communicate using a raw
device interface on the host and in the DPDK application. The device
created is a Tap device with a L2 packet header.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Aws Ismail <aismail@ciena.com>
Tested-by: Vasily Philipov <vasilyf@mellanox.com>
remove the following API's:
rte_eth_dev_set_vf_rxmode
rte_eth_dev_set_vf_rx
rte_eth_dev_set_vf_tx
rte_eth_dev_set_vf_vlan_filter
rte_eth_dev_set_vf_rate_limit
Increment LIBABIVER in Makefile
Remove deprecation notice for removing rte_eth_dev_set_vf_* API's.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Check that Rx mbuf pool, MTU and Rx scatter config are in sync.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Resources required in accordance with configuration are
allocated only.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Manual link speed/duplex configuration is not supported yet.
Loopback is not supported yet.
Flow Director is not supported.
Link status change notification using interrupt is not supported yet.
Receive data notification using interrupts is not supported yet.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Enable the PMD by default on supported configurations.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds a new function eth_igb_fw_version_get.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This patch adds a new API 'rte_eth_dev_fw_version_get' for
fetching firmware version by a given device.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Last changes in Niantic and Fortville NIC drivers causes that
vector Rx path is chosen by default in l3fwd-thread application.
This path doesn't support propagation of hw packet type recognition
to the packet_type field in mbuf, and packets cannot be classified
properly.
The approach to solve this problem is similar to the commit:
71a7e2424e ("examples/l3fwd: fix using packet type blindly").
To use sw packet analyzer, new command line option "--parse-ptype" is
introduced.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
A referenced document in the Linux Kernel has been moved to a
sub-directory. And kernel community has moved to RST/Sphinx. The links are
replaced with HTML rendered links.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
L3 Forwarding sample app user guides have some inconsistencies
between the example command line and the configuration table.
Also, they were showing too complicated configuration, using two
different NUMA nodes for two ports, which will probably lead
to performance drop due to use cross-socket channel.
This patch simplifies the configuration of these examples,
by using a single NUMA node and a single queue per port.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch fixes a trivial typo in testpmd application guide.
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch mainly allocates structure to store queue/irq mapping,
and configure queue/irq mapping down through PCI ops. It also creates
eventfds for each Rx queue and tell the kernel about the eventfd/intr
binding.
Note: So far, we hard-code 1:1 queue/irq mapping (each rx queue has
one exclusive interrupt), like this:
vec 0 -> config irq
vec 1 -> rxq0
vec 2 -> rxq1
...
which means, the "vectors" option of QEMU should be configured with
a value >= N+1 (N is the number of the queue pairs).
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This patch add support vhost kernel as the backend for virtio_user.
Three main hook functions are added:
- vhost_kernel_setup() to open char device, each vq pair needs one
vhostfd;
- vhost_kernel_ioctl() to communicate control messages with vhost
kernel module;
- vhost_kernel_enable_queue_pair() to open tap device and set it
as the backend of corresonding vhost fd (that is to say, vq pair).
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The introduce of virtio 1.0 support brings yet another set of ops, badly,
it's not handled correctly, that it breaks the multiple process support.
The issue is the data/function pointer may vary from different processes,
and the old used to do one time set (for primary process only). That
said, the function pointer the secondary process saw is actually from the
primary process space. Accessing it could likely result to a crash.
Kudos to the last patches, we now be able to maintain those info that may
vary among different process locally, meaning every process could have its
own copy for each of them, with the correct value set. And this is what
this patch does:
- remap the PCI (IO port for legacy device and memory map for modern
device)
- set vtpci_ops correctly
After that, multiple process would work like a charm. (At least, it
passed my fuzzy test)
Fixes: b8f04520ad ("virtio: use PCI ioport API")
Fixes: d5bbeefca8 ("virtio: introduce PCI implementation structure")
Fixes: 6ba1f63b5a ("virtio: support specification 1.0")
Cc: stable@dpdk.org
Reported-by: Juho Snellman <jsnell@iki.fi>
Reported-by: Yaron Illouz <yaroni@radcom.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Below MACsec offload commands are added:
- set macsec offload <port_id> on encrypt on|off replay-protect on|off
- set macsec offload <port_id> off
- set macsec sc tx|rx <port_id> <mac> <pi>
- set macsec sa tx|rx <port_id> <idx> <an> <pn> <key>
Also update the testpmd user guide.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
MACsec (or LinkSec, 802.1AE) is a MAC level encryption/authentication
scheme defined in IEEE 802.1AE that uses symmetric cryptography.
This commit adds the MACsec offload support for ixgbe.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Attaching and detaching ethernet ports from an application
is not the same thing as physically removing a PCI device,
so clarify the flags indicating support. All PCI devices
are assumed to be physically removable, so no flag is
necessary in the PCI layer.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Leaving default pattern item mask values up for interpretation by PMDs is
an undefined behavior that applications might find difficult to use in the
wild. It also needlessly complicates PMD implementation.
This commit addresses this by defining consistent default masks for each
item type.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Contrary to the current description, mbuf RSS hash result storage does not
overlap with the returned MARK value (hash.fdir.lo vs. hash.fdir.hi), and
both may be combined.
Reflect this change by allowing testpmd to display both values
simultaneously.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Both actions share the PKT_RX_FDIR mbuf flag, as a result there is no way
to tell them apart. Moreover, the maximum allowed value for the MARK action
may not necessarily cover the entire 32-bit space.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add common vector type definitions to all CPU architectures.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Chao Zhu <chaozhu@linux.vnet.ibm.com>
Rename tools/ into usertools/ to differentiate from buildtools/
and devtools/ while making clear these scripts are part of
DPDK runtime.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
The remaining scripts in the scripts/ directory are only useful
to developers. That's why devtools/ is a better name.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
There is already a directory buildtools for pmdinfogen used by
the build system. The scripts used in makefiles are moved here.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add a requirement to support both Python 2 and 3 to the
DPDK Python Coding Standards and Getting started Guide.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Make all DPDK python application compliant with the PEP8 standard
to allow for consistency checking of patches and to allow further
refactoring.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
This commit exposes the following item fields through the flow command:
- VLAN priority code point, drop eligible indicator and VLAN identifier
(all part of TCI).
- IPv4 type of service, time to live and protocol.
- IPv6 traffic class, flow label, next header and hop limit.
- SCTP tag and checksum.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Document syntax, interaction with rte_flow and provide usage examples.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
They are superseded by the generic flow API (rte_flow). Target release is
not defined yet.
Suggested-by: Kevin Traynor <ktraynor@redhat.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
This new API supersedes all the legacy filter types described in
rte_eth_ctrl.h. It is slightly higher level and as a result relies more on
PMDs to process and validate flow rules.
Benefits:
- A unified API is easier to program for, applications do not have to be
written for a specific filter type which may or may not be supported by
the underlying device.
- The behavior of a flow rule is the same regardless of the underlying
device, applications do not need to be aware of hardware quirks.
- Extensible by design, API/ABI breakage should rarely occur if at all.
- Documentation is self-standing, no need to look up elsewhere.
Existing filter types will be deprecated and removed in the near future.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olga Shern <olgas@mellanox.com>
Doing a device information query on a non-PCI device such as
vhost was resulting in the dereferencing of a NULL pointer
(the absent PCI data), causing a segmentation fault.
Fixes: bda68ab9d1 ("examples/ethtool: add user-space ethtool sample application")
Signed-off-by: Remy Horton <remy.horton@intel.com>
This patch fixes a trivial typo in testpmd application user guide.
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
DPDK source archives are .tar.xz or .tar.gz, not .zip. Use .tar.xz in the
instructions, since that is what the main download page links to.
Also, correct the archive file and directory name capitalization.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: John McNamara <john.mcnamara@intel.com>
The Python requirement should appear in the bullet list.
Also, indent the x32 note, since it is related to the previous bullet.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add a new section to the Code Contributors Guide to outline
the roles of tree and component maintainers and how they
can be added and removed.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Having reference benchmarks is important in order to obtain
reproducible performance figures.
This patch describes required steps to configure a PVP setup
using testpmd in both host and guest.
Not relying on external vSwitch ease integration in a CI loop by
not being impacted by DPDK API changes.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Kevin Traynor <ktraynor@redhat.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
There was an option CONFIG_RTE_INSECURE_FUNCTION_WARNING (disabled by
default), which prevents from using some libc functions:
sprintf, snprintf, vsnprintf, strcpy, strncpy, strcat, strncat, sscanf,
strtok, strsep and strlen.
It's all about using them at the right place with the right precautions.
However, it is neither really possible nor a good advice to disable them.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
