This patch adds a command to display DCB info in ports.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This patch enables DCB feature on Intel XL710/X710 NICs. It includes:
Receive queue classification based on traffic class
Round Robin ETS schedule (rx and tx)
Priority flow control
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
DPDK uses a structure to get or set a new hash key (see
eth_rte_rss_hash_conf). rss_hf field from this structure is used in
rss_hash_get_conf to retrieve the hash key and in rss_hash_update uses
it to verify the key exists before trying to update it.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
To support FVL PMD can select which RX and TX function should be used
according to the queue config.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Feature Add: Rx/Tx flow control support for the i40e
All the Rx/Tx LFC enable/disable operation is done by the F/W,
so PMD driver need to use the Set PHY Config AD command to trigger the PHY
to do the auto-negotiation, after the Tx/Rx pause ability is negotiated,
the F/W will help us to set the related LFC enable/disable registers.
PMD driver also need to configure the related registers to control
how often to send the pause frame and what the value in the pause frame.
Signed-off-by: Zhe Tao <zhe.tao@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Boulder Rapid is Intel new NIC within fm10k family.
This patch make DPDK driver support this new NIC.
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
This patch enables fm10k TSO feature for both non-tunneling packet
and tunneling packet.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
Enable rx interrupt support on e1000 physical and emulated device.
Implement rxq interrupt related functions in eth_dev_ops structure.
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Implement the new CLIs for fdir mac vlan and tunnel modes, including
flow_director_filter and flow_director_mask. Set the mask of fdir.
Add, delete or update the entities of filter.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch implements the VF RSS reta/hash query and update function
on 10G NICs. But the update function is only provided for x550. Because
the other NICs don't have the separate registers for VF, we don't want
to let a VF NIC change the shared RSS reta/hash registers. It may cause
PF and other VF NICs' behavior change without being noticed.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Comparing with the older NICs, x550's RSS redirection table is enlarged to 512
entries. As the original code is for the NICs which have a 128 entries RSS table,
it means only part of the RSS table is set on x550. So, RSS cannot work as
expected on x550, it doesn't redirect the packets evenly.
This patch configs the entries beyond 128 on x550 to let RSS work well, and also
update the query and update functions to support 512 entries.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Fixed issue where the flag PKT_RX_IEEE1588_PTP was not being set
in Intel I210 NIC, as EtherType in RX descriptor is in bits 8:10 of
Packet Type and not in the default bits 0:2.
Fixes known issue "IEEE1588 support possibly not working
with an Intel Ethernet Controller I210 NIC"
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch enables igb TSO feature, the feature works on both PF and VF.
The TCP segmentation offload needs to write the offload related information
into the advanced context descriptors, which is similar to checksum offload.
Signed-off-by: Wang Xiao W <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This is a useful default for simple applications where the assignment
of lcores to CPUs doesn't matter. It's also useful for more complex
applications that automatically assign tasks to cores based on the
NUMA topology.
Signed-off-by: Rich Lane <rich.lane@bigswitch.com>
Fix a number of RST issues in the testpmd user guide and
refactored the structure to:
* Remove redundant roadmap section.
* Merge Overview section into Introduction.
* Move "set fwd" to the start of its section.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fix a pdf doc build warning where a link wasn't recognised:
doc/guides/contributing/documentation.rst::
WARNING: unusable reference target found: inkscape.org
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch refers to the ABI change proposed for
librte_cfgfile(rte_cfgfile.h). In order to allow
for longer names and values, the values of macro
CFG_NAME_LEN and CFG_VAL_LEN is increased.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
'virtual' is a keyword and can't be used if the code is to compile with
C++ compilers.
If rte_devargs.h was included in C++ code, compilation with clang++
failed with an error. g++ did not fail, but only because of a bug
that treats it as an anonymous struct with a decl-specifier which it
ignores.
This simply renames the member to 'virt'.
Reported-by: Ming Zhao <mzhao@luminatewireless.com>
Signed-off-by: Christoph Gysin <christoph.gysin@gmail.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: David Marchand <david.marchand@6wind.com>
if input parameter vq is NULL, hw = vq->hw, causes a segmentation fault.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
For virtio-net pmd, the interrupt management thread must be created after
this driver has initialised so that iopl() has been properly called and
its effects are inherited by all eal children threads.
Before this change, changing link status on a virtio-net device would
trigger a segfault in the interrupt thread :
$ mkdir -p /mnt/huge
$ echo 256 > /proc/sys/vm/nr_hugepages
$ mount -t hugetlbfs none /mnt/huge
$ lspci |grep Ethernet
00:03.0 Ethernet controller: Red Hat, Inc Virtio network device
$ modprobe uio
$ insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko
$ echo 0000:00:03.0 > /sys/bus/pci/devices/0000\:00\:03.0/driver/unbind
$ echo 1af4 1000 > /sys/bus/pci/drivers/igb_uio/new_id
$ ./x86_64-native-linuxapp-gcc/app/testpmd -c 0x6 -n 3 -w 0000:00:03.0 -- -i --txqflags=0xf01 --total-num-mbufs 2048
[snip]
EAL: PCI device 0000:00:03.0 on NUMA socket -1
EAL: probe driver: 1af4:1000 rte_virtio_pmd
Interactive-mode selected
Configuring Port 0 (socket 0)
Port 0: DE:AD:DE:01:02:03
Checking link statuses...
Port 0 Link Up - speed 10000 Mbps - full-duplex
Done
testpmd>
Then, from qemu monitor:
(qemu) set_link virtio-net-pci.0 off
testpmd> Segmentation fault
Fixes: 565b85dcd9 ("eal: set iopl only when needed")
Reported-by: Stephen Hemminger <shemming@brocade.com>
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
Increase max_rx_pktlen to accommodate jumbo frame size. Perform sanity
checks and enable jumbo mode in rx queue setup. Set link mtu based on
max_rx_pktlen.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Update sge initialization with respect to free-list manager configuration
and ingress arbiter. Also update refill logic to refill mbufs only after
a certain threshold for rx. Optimize tx packet prefetch.
Approx. 3 MPPS improvement seen in forwarding performance after the
optimization.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
This patch relates to ABI change proposed for librte_port. Macros to
access the packet meta-data stored within the packet buffer has been
adjusted to cover the packet mbuf structure.
The LIBABIVER number is incremented.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch relates to ABI change proposed for librte_table
(lpm table). A new parameter to hold the table name has
been added to the LPM table parameter structures
rte_table_lpm_params and rte_table_lpm_ipv6_params.
The LIBABIVER number is incremented. The release notes
is updated and the deprecation announcement is removed.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Old flow director API have been replaced by rte_eth_dev_filter_ctrl
since release 2.0. And no driver in current code support these functions.
All the removed functions are listed below:
- rte_eth_dev_fdir_add_perfect_filter;
- rte_eth_dev_fdir_add_signature_filter;
- rte_eth_dev_fdir_get_infos;
- rte_eth_dev_fdir_remove_perfect_filter;
- rte_eth_dev_fdir_remove_signature_filter;
- rte_eth_dev_fdir_set_masks;
- rte_eth_dev_fdir_update_perfect_filter;
- rte_eth_dev_fdir_update_signature_filter;
The library version was already incremented in a previous patch.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
[Thomas: fix mlx4 and update release notes]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Update the DPDK 2.2 release notes with recent fixes:
9db649 eal/linux: fix epoll timeout
d49e0f hash: fix memory allocation of cuckoo key table
7fcd13 ixgbe: fix X550 DCB
5e73f4 ixgbe: remove burst size restriction of vector Rx
7e01e3 i40e: fix base driver allocation when not using first numa node
d53364 vhost: fix qemu shutdown
The order of sections (and inside) is inspired from MAINTAINERS file.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch originates from the patch:
"Patch for Qemu wrapper for US-VHost to ensure Qemu process ends when
VM is shutdown", http://dpdk.org/ml/archives/dev/2014-June/003606.html
Also update the vhost sample guide doc.
Signed-off-by: Claire Murphy <claire.k.murphy@intel.com>
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
This commit removes the dev-index, so update the doc for this change:
Fixes: 17b8320a3e ("vhost: remove index parameter")
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
From version 2.2 of DPDK onwards patchsets should include
updates to the Release Notes for additions, fixes and
changes.
Add guideline on what to update in the Release Notes to the
Documentation Contribution guidelines.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
The two examples of ethertype_filter in testpmd documentation
were missing the mac address field, so the example was incorrect.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The function rte_jhash2() was renamed rte_jhash_32b and
macros RTE_HASH_KEY_LENGTH_MAX and RTE_HASH_BUCKET_ENTRIES_MAX
were tagged as deprecated, so they can be removed in 2.2.
RTE_HASH_KEY_LENGTH is replaced in unit tests by an internal macro
for the memory allocation of all keys used.
The library version number is incremented.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
These were deprecated in 2.0 so remove them from 2.2.
The library version is incremented.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
These functions were tagged as deprecated in 2.0 so they can be
removed in 2.2.
The library version is incremented.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Helin Zhang <helin.zhang@intel.com>
[Thomas: update doc and version]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The functions and structures are moved to app/test in order to keep
existing unit tests. Some minor changes were done in these functions
because of library scope restrictions.
An enum is also copied in two other applications to keep existing code.
The library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The malloc library is now part of the EAL.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The function rte_eal_pci_close_one() was renamed rte_eal_pci_detach().
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: David Marchand <david.marchand@6wind.com>
The extended SCTP flow entries are now part of the standard API.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The extended unified packet type is now part of the standard ABI.
As mbuf struct is changed, the mbuf library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The Rx interrupt feature is now part of the standard ABI.
Because of changes in rte_intr_handle and struct rte_eth_conf,
the eal and ethdev library versions are incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
[Thomas: merged with new release notes style]
Acked-by: John McNamara <john.mcnamara@intel.com>
Added release notes for the DPDK R2.1 release.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
[Thomas: small fixes]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
These functions are marked as deprecated for a long time:
61934c0956 ("ring: convert to use of PMD_REGISTER_DRIVER and fix linking")
As suggested in this patch, it should be removed:
http://dpdk.org/ml/archives/dev/2015-June/019253.html
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
These functions are marked as deprecated for a long time:
fbf895d44c ("kni: identify device by name")
As suggested in this patch, it should be removed:
http://dpdk.org/ml/archives/dev/2015-June/019254.html
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
These functions are marked as deprecated for a long time.
As suggested in this patch, it should be removed:
http://dpdk.org/ml/archives/dev/2015-June/019255.html
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
It announces the planned ABI changes for vhost-user multiple
queues feature on v2.2.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
For x550 supports 2 new flow director modes, MAC VLAN and Cloud.
The MAC VLAN mode means the MAC and VLAN are monitored.
The Cloud mode is for VxLAN and NVGRE, and the tunnel type,
TNI/VNI, inner MAC and inner VLAN are monitored.
So, there're a few new lookup fields for these 2 new modes, like MAC,
tunnel type, TNI/VNI.
We have to change the ABI to support these new lookup fields.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
To fix the FVL's flow director issue for SCTP flow, rte_eth_fdir_filter
need to be change to support SCTP flow keys extension. Here announce
the ABI deprecation.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
APIs for flow director filters has been replaced by rte_eth_dev_filter_ctrl
by previous releases. Enic, ixgbe and i40e are switched to support filter_ctrl
APIs, so the old APIs are useless, and ready to be removed now.
This patch announces the ABI change for these APIs removing.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The patch announces the planned ABI changes for interrupt mode.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
One hierarchical level is enough for this table of content.
Use generated release number.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Some libraries were not included in doxygen documentation.
Other ones were included but not listed in the index.
The malloc library is now included in EAL.
The libraries compat and jobstats are added but not doxygen compliant.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Restructured the Release Notes documentation into a more useful structure
that is easier to use and to update between releases.
The main changes are:
* Each release version has it's own section with New Features,
Resolved Issues, Known Issues and API/ABI Changes.
* Redundant sections have been removed.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Clarify target of guidelines by renaming the title and the directory.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Moved and refactored the Doxygen guidelines from the Coding Style doc
to the Documentation Guidelines doc. Replaced the existing Doxygen
references with links.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Added guidelines on the purpose and structure of the DPDK
documentation, how to build it and guidelines for creating it.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Set the default literal block format for Sphinx docs
to 'none' instead of the implicit default of 'python'.
This means that default :: blocks won't have any
highlighting applied. Explicit highlighting via
the code-block:: directive is already available and
in use in the docs.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch updates the "Source Organisation" section of the
Programmers Guide to add an note that the code in the
drivers/net/pmd/base directories should not be modifed
by the user apart from the pmd_osdep.[ch] files.
Also fixes some grammar and rst issues in that section.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
The patch updates the env_abstraction_layer.rst part in prog_guide.
It adds the RX interrupt event declaration and revises the others in
interrupt event section.
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Danny Zhou <danny.zhou@intel.com>
When using VM power manager app on systems with more than 64 cores,
app could not run even though user does not use cores 64 or higher.
The problem happens only in that case, in which case it will result
in an undefined behaviour.
Thefere, this patch allows the user to run the app on a system with more
than 64 cores, warning the user not to use cores higher than 64 in the VM(s).
Add new known issue where VM power manager app may not work
in a system with more than 64 cores, in release notes.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
The RX_OLFLAGS option was renamed from DISABLE to ENABLE in driver code
and linux config.
It is now renamed also in bsd config and documentation.
Fixes: 359f106a69 ("ixgbe: prefer enabling olflags rather than not disabling")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
librte_pmd_mlx4.so needs to be linked with libibverbs otherwise, the PMD is
not able to open Mellanox devices and the following message is printed by
testpmd at startup
"librte_pmd_mlx4: cannot access device, is mlx4_ib loaded?".
Applications dependency on libibverbs are moved to be only valid in static
mode, in shared mode, applications do not depend on it anymore,
librte_pmd_mlx4.so keeps this dependency and thus is linked with libibverbs.
MLX4 cannot be supported in combined shared library because there is no clean
way of adding -libverbs to the combined library.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add a VXLAN sample guide in the sample_app_ug directory.
It includes:
- Add the overlay networking picture with svg format.
- Add the TEP termination framework picture with svg format.
- Add the tep_termination.rst file
- Change the index.rst file for the above pictures index.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Thomas Long <thomas.long@intel.com>
Acked-by: Marvin Liu <yong.liu@intel.com>
Add a comment for outer-ip option in csum command.
Set outer-ip option only when the packet is a IPv4 packet.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Marvin Liu <yong.liu@intel.com>
RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC config option is not really
necessary, as bulk alloc rx function can be used anyway, as long as the
necessary conditions are satisfied, which are checked already
in the library.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Update cxgbe documentation to include support for FreeBSD:
1. Add instructions on how to compile CXGBE PMD in FreeBSD.
2. Add instructions on how to flash firmware image on Chelsio T5 cards in
FreeBSD.
3. Add sample application usage for FreeBSD.
4. Add an extra step to reload kernel module in Linux in order for the new
firmware to be loaded.
5. Typo fixes.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
There are close and detach functions in ethdev.
To keep a consistent naming, PCI functions called by ethdev detach
must be named "detach" instead of "close".
Fix also comments which mix close and uninit names.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This chapter is for ABI and API. That's why a renaming is required.
Remove also the examples which are now in the referenced guidelines.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
proc_info displays statistics information including extended stats for
given DPDK ports and dumps the memory information for DPDK.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Remove non generic stats in rte_stats_strings and mark the relevant
fields in struct rte_eth_stats as deprecated.
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Announce the creation of dummy malloc library for 2.1 and removal of
such library, now integrated in librte_eal, for 2.2 release.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Fix spelling and grammar errors. Re-organize sections for better explanation
in the documentation. Add a section describing compilation of CXGBE with DPDK.
Add a note describing that CXGBE currently only supports binding to PF4.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Updates hash library documentation, reflecting
the new implementation changes.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Two of the macros in rte_hash.h are now deprecated, so this patch
adds notice that they will be removed in 2.2.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The significant ABI change is planned for struct rte_eth_dev to support
up to 1024 queues per port which will be taken effect from release 2.2.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Update cxgbe documentation with the following:
1. Add instructions on how to flash firmware and config file on Chelsio T5
devices.
2. Add a list of supported devices.
3. Add instructions on how to enable and disable flow control via testpmd.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Refactor the ieee1588_fwd mode in testpmd to use the new ethdev
APIs to enable and read IEEE1588 PTP timestamps.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When a change makes really hard to keep ABI compatibility,
instead of waiting next release to break the ABI, it is smoother
to introduce the new code as a preview and disable it when packaging.
The flag RTE_NEXT_ABI must be used to "ifdef" the new code.
When the release is out, a dynamically linked application can use
the new shared libraries with the old ABI while developpers can prepare
their application for the next ABI by reading the deprecation notice
and easily testing the new code.
When starting the next release cycle, the "ifdefs" will be removed
and the ABI break will be marked by incrementing LIBABIVER. The map
files will also be updated.
The default value is enabled to be developer compliant.
The packagers must disable it as done in pkg/dpdk.spec.
When enabled, all shared library numbers are incremented by appending
a minor .1 to the old ABI number. In the next release, only impacted
libraries will have a major +1 increment.
The impacted libraries must provide an alternative map file to use
with this option.
The ABI policy is updated.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
This patch extends flow director commands to support l2_payload flow type.
Test report: http://dpdk.org/ml/archives/dev/2015-June/020238.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
This path renames the mirror type in rte_eth_mirror_conf and macros,
and rework the mirror set in ixgbe drivers by using new definition.
It also fixes some coding style.
Test report: http://dpdk.org/ml/archives/dev/2015-June/019118.html
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
If double vlan is detected, its stripped flag and vlan tags can be
printed on rxonly mode. Test command of 'tx_vlan set' is expanded
to set both single and double vlan tags on TX side for each packets
to be sent out.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Fix for a minor Sphinx build warning in the ABI guidelines docs:
versioning.rst:126: WARNING: Bullet list ends without a
blank line; unexpected unindent.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Adds cxgbe poll mode driver documentation under the usual doc/guides/nics/
directory with the rest of the drivers. The documentation covers cxgbe
implementation details, features and limitations, prerequisites,
configuration, and a sample application usage.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
When moving ABI policy to guidelines, the new doc was referred
without using sphinx link.
Fixes: f1ef9794f9 ("doc: add ABI guidelines")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
People have been asking for ways to use the ABI macros, heres some docs to
clarify their use. Included is:
* An overview of what ABI is
* Details of the ABI deprecation process
* Details of the versioning macros
* Examples of their use
* Details of how to use the ABI validator
Thanks to John Mcnamara, who duplicated much of this effort at Intel while I was
working on it. Much of the introductory material was gathered and cleaned up by
him.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Jenkins hash function was developed originally in 1996,
and was integrated in first versions of DPDK.
The function has been improved in 2006,
achieving up to 35% better performance, compared to the original one.
This patch integrates that code into the rte_jhash library.
It also updates the precalculated hash values in the unit test,
as the code now returns different values (expected).
A final note has been added in release notes for stating
the changes made.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add coding standards document to guides directory. This document
codifies the current DPDK C coding conventions, to make it easier for
contributors to see the format their code should be in.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This change adds automatic table references to the docs. The
table numbers in the generated Html and PDF docs are now
automatically numbered based on section.
Requires Sphinx >= 1.3.1.
This change:
* Adds a RST table:: directive to each table caption.
* Indents the tables to the required directive level.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
This change adds automatic figure references to the docs. The
figure numbers in the generated Html and PDF docs are now
automatically numbered based on section.
Requires Sphinx >= 1.3.1.
The patch makes the following changes.
* Changes image:: tag to figure:: and moves image caption
to the figure.
* Adds captions to figures that didn't previously have any.
* Un-templates the |image-name| substitution definitions
into explicit figure:: tags. They weren't used more
than once anyway and Sphinx doesn't support them
for figure.
* Adds a target to each image that didn't previously
have one so that they can be cross-referenced.
* Renamed existing image target to match the image
name for consistency.
* Replaces the Figures lists with automatic :numref:
:ref: entries to generate automatic numbering
and captions.
* Replaces "Figure" references with automatic :numref:
references.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
This change adds some simple handling for the :numref: directive
for Sphinx versions prior to 1.3.1. This allows the Guides
documentation to be built with older versions of Sphinx and still
produce reasonable results.
The patch replaces the :numref: reference with a link to the
target (for all Sphinx doc types). It doesn't try to label
figures/tables.
Full numref support with automatic figure/table numbering and
links can be obtained by upgrading to Sphinx 1.3.1 or later.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move xenvirt PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move vmxnet3 PMD to drivers/net directory.
As part of the move, rename the "vmxnet3" subdirectory, containing the
original FreeBSD drivers, from "vmxnet3" to the more standard name
"base", to indicate it contains the base drivers used for the
implementation.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move virtio PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move ring PMD to drivers directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move pcap pmd to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move null PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
move mlx4 PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
move ixgbe PMD to drivers/net directory.
As part of the move, we rename the ixgbe directory, containing the
ixgbe "base driver" code, from "ixgbe" to "base".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move i40e PMD to drivers/net directory.
As part of the move, rename the "i40e" directory, containing the "base
driver" code, from "i40e" to "base".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
move fm10k PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
move enic PMD to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
[Thomas: move vnic/ to base/]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move e1000 pmd to drivers/net directory
As part of move, rename "e1000" subdirectory, which contains the code
from the "base driver", to "base".
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Move bonded ethdev pmd to drivers/net
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
move af_packet pmd to drivers/net directory
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add a new top-level "drivers" directory to which all PMDs will be moved
for easier maintenance of both lib folder and drivers themselves. This
new directory is a dependency of all the apps in the app folder, so
the makefiles for each app are updated.
To the new top-level directory add a "net" subdirectory to classify
more specifically our existing PMDs as ethernet drivers
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
[Thomas: fix dependencies and merge several patches]
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch adds the ability to process console input in the same thread
as packet processing by using poll() function.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
NO_AUTOLIBS is not required as it was not used or defined in the config files.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Enabled Doxygen option to add links to the source code
in documented entities.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
Disabled the doxygen option to sort member data so that functions
and struct memebers are listed in order of definition in the
brief and main sections.
Previously they were sorted in the brief section and were in
definition order in the main section.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
Add a new wrapper to rte_mempool_create() to simplify the creation
of a packet mbuf pool.
This wrapper can be used if there is no specific mempool flags, and
no specific mbuf or pool constructor function, which is most of the
use cases.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Deduct the mbuf data room size from mempool->elt_size and priv_size,
instead of using an hardcoded value that is not related to the real
buffer size.
To use rte_pktmbuf_pool_init(), the user can either:
- give a NULL parameter to rte_pktmbuf_pool_init(): in this case, the
private size is assumed to be 0, and the room size is
mp->elt_size - sizeof(struct rte_mbuf).
- give the rte_pktmbuf_pool_private filled with appropriate
data_room_size and priv_size values.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Guide says that a configure parameter to choose between vhost cuse
and vhost user will be introduced in the future, but it’s already
added by commit 28a1ccca41.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
Converted the Glossary table in the Programmer's Guide
to a definition list to improve rendering.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Some blocks are not visible with some Sphinx versions because
they are using the wrong keyword for code.
Tested with Sphinx v1.1.3.
Fixes: 1733be6d31 ("doc: new eal multi-pthread feature")
Fixes: ccefe752ca ("doc: add jobstats sample guide")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
CONFIG_RTE_MBUF_SCATTER_GATHER was renamed into CONFIG_RTE_MBUF_REFCNT
by commit 62814bc2e9 and removed by commit 4769bc5a27.
Some traces remain because of delayed patches.
It can also be removed from doxygen config.
It is now poisoned in rte_mbuf.h to warn any misuse.
Fixes: d0dff9ba44 ("doc: sample application user guide")
Fixes: fc1f2750a3 ("doc: programmers guide")
Fixes: 4769bc5a27 ("mbuf: remove build option to disable refcnt")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Changchun Ouyang <changchun.ouyang@intel.com>
- libmlx4 and libibverbs dependencies distributed with Mellanox OFED are now
also available on DPDK.org to make installation easier.
- Document Mellanox OFED and firmware versions to use.
- Add links to Mellanox and its community websites.
- Add kernel modules parameters section.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Added notes for i40e firmware version. As base driver to support the
latest version of firmware (FVL3E) hasn't been integrated, currently
the validated version of firmware is 4.2.6.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
Since txqflags is now set from the default rx/tx configuration,
depending on the PMD, it might not be 0.
Therefore, user has to overwrite it with --txqflags 0.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
It updated the user guide of testpmd, for the newly supported commands
of getting/setting hash functions, and the command of showing port
information.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Added some documentation on common issues for the vhost sample app
and how to resolve them.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
This patch adds a note to the release notes new features,
as a warning regarding the early status of the FM10K driver for pre-release access
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Since the uio_pci_generic module requires that the device to which it is
being bound supports legacy interrupts, there can be problems using it
with VF devices. Add a note to the GSG doc to document this fact, and
provide information on loading igb_uio as a replacement.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
Document the functions introduced by commit 64fc36064d.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
There are some references to DPDK.xyz.mk files that do not exist in the
dpdk tree. This was probably the result of an automatic replacement, so
restore the proper file names which are rte.xyz.mk.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Added information on testpmd user guide
for -l, --lcores and --master-lcore options
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
Create nics guide by moving chapters about Intel and Mellanox NICs.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
Xen is an environment comparable to Linux and FreeBSD which
have their own guide.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE has no effect since this option enables
MLX4_PMD_COMPAT_VMWARE. This macro is not used by the PMD which expects
MLX4_COMPAT_VMWARE instead.
Because this option does not work and the related code is no longer useful
for VMware (as it actually supports the flow steering API), remove it
entirely.
Signed-off-by: Olga Shern <olgas@mellanox.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The "manual" Latex template provided by Sphinx introduce a lot
of useless and confusing blank pages.
Let's remove them.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This mainly adds metadata but also includes an override to the
Latex formatter to control the font size in code blocks.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
When generating Latex for PDF, this error occurs:
! Undefined control sequence.
\version ->b'2.0.0-rc2\n
Decoding bytes stream into UTF-8 fixes the issue.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Add make system support for building PDF versions of
the guides. Requires Python Sphinx and TexLive Full.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Changed all image.svg and image.png extensions to image.*
This allows Sphinx to decide the appropriate image type
from the available image options.
In case of PDF, SVG images are converted and Sphinx must pick
the converted version.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Refactored split cell in test_pipeline table to allow it to
convert cleanly to PDF.
The Sphinx/Latex converter doesn't handle split cells like the
following:
+-------------+--------------+
| Header 1 | Header 2 |
+=============+==============+
| | |
| | |
+-------------+ |
| | |
| | |
+-------------+--------------+
Instead the table was refactored to a simpler format:
+-------------+--------------+
| Header 1 | Header 2 |
+=============+==============+
| | |
| | |
+-------------+--------------+
| | |
| | |
+-------------+--------------+
The same information was retained in the table.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Change encoding of (r) from Latin-1 to UTF8 to match the other
symbols in the doc and to allow it to convert cleanly to PDF.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Removing Intel copyright from base of page for each document.
Signed-off-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch add contents for major change in single virtio implementation,
also add back something for merge-able feature and promiscuous mode in virtio.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
Added a sample application guide for the rxtx_callbacks app.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Added a sample application guide for the basic forwarding
/skeleton app.
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Let's make sure people will not forget to set and unset VIRTIO_DEV_RUNNING.
Signed-off-by: Benoît Canet <benoit.canet@nodalink.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
test-framework.sh is an old script to check building of some dependencies.
testhost is an old app used to check HOSTCC.
Let's clean the scripts directory.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Update the testpmd doc as there are new HW VLAN commands/options.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Siobhan Butler <siobhan.a.butler@intel.com>
This patch adds information to testpmd_funcs.rst file,
about limited number of vlan_ids possible to be enabled
in a filter. This is limited to the maximum number of entries
possible in the VFTA table.
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The patch introduces following commands.
- port attach [ident]
- port detach [port_id]
- attach: attaching a port
- detach: detaching a port
- ident: pci address of physical device.
Or device name and parameters of virtual device.
(ex. 0000:02:00.0, eth_pcap0,iface=eth0)
- port_id: port identifier
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This patch adds a new section for describing port hotplug framework.
Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
This documentation covers implementation details, features and limitations,
configuration, prerequisites and provides a usage example.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Since DPDK now has support for the in-tree uio_pci_generic driver,
update the programmers guide document to reference this module, and to use it
in preference to the igb_uio driver, which is DPDK-specific.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
