The decision on which version of the INIT_EVQ command to use may
be done inside the function itself. Caller should just provide
enough information sufficient in both cases. It avoids code
duplication and simplifies maintenance.
If v2 is not supported, keep decision about low-latency hint outside
the MCDI helper function since it will differ on Riverhead (there is
no EVB yet, but still want merging for better throughput).
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
v1 and v2 defines are the same except output length.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
There is no point to duplicate these generic checks in NIC family
specific handlers.
As the side effect it fixes bug with incorrect interrupt moderation
settings silently ignored on event queue create on Siena.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
EvQ init/fini MCDI is similar on Riverhead and these
functions should be reused to implement EvQ creation and
destruction on Riverhead.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
Riverhead supports interrupt aggregation rings. Right now there
are no plans to support it in libefx, but it is better to have
own set of callbacks to easier handle EF10 and Riverhead
differences in the future.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
There is no difference yet in MAC support on EF10 and Riverhead.
So, it is better to reuse existing methods.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
Filtering MCDI on Riverhead are the same as on EF10.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
Define basic NIC features and limitations.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
There is no point to duplicate it NIC family specific probe handlers.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
ef10_get_datapath_caps() should simply fill in NIC configuration
based MC_CMD_GET_CAPABILITIES output.
Number of PFs is a part of board configuration should be obtained
in corresponding function.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
The function which gets capabilities from MC should simply fill in
NIC configuration. Caller should decide if the configuration is
supported or not.
The change is required to prepare the function to be reused on
Riverhead.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
There is no difference yet in PHY support on EF10 and Riverhead.
So, it is better to reuse existing methods.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
MCDI on Riverhead is very close to the EF10 and there is no
point to duplicate the code.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Riverhead family got letter 'G' for registers definition.
Registers used for Riverhead should have the letter in the
specification range.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
Riverhead is the first NIC family of the EF100 architecture.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Reviewed-by: Vijay Kumar Srivastava <vsrivast@xilinx.com>
Event queue host interface differ on Riverhead and implementation
will be different.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Adding support for RTE Flow VLAN insert and strip actions.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When TX side VTAG insertion is enabled, SMQ should be configured with
the maximum VTAG insertion size to avoid generating NIX_SQINT_SEND_ERR
interrupt. Since the default value is zero, This patch configures the
VTAG insertion size to the max supported value.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
This patch adds required bit to handle VF FLR
indication from Management FW (MFW) of the device
With that VFs were able to load in VM (VF attached as PCI
passthrough to the guest VM) followed by FLR successfully
Updated the docs/guides with the feature support
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
This patch configures VFs with random mac if no MAC is
provided by the PF/bulletin. This also adds required bulletin
APIs by PF-PMD driver to communicate LINK properties/changes to
the VFs through bulletin update mechanism.
With these changes, VF-PMD instance is able to run
fastpath over PF-PMD driver instance.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
This patch adds necessary infrastructure support (required to handle
messages from VF and sending ramrod on behalf of VF's configuration
request from alarm handler context) to start/load the VF-PMD driver
instance on top of PF-PMD driver instance.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Based on number of VFs enabled at PCI, PF-PMD driver instance
enables/configures those VFs from hardware perspective, such
that in later patches they could get required HW access to
communicate with PFs for slowpath configuration and run the
fastpath themselves.
This patch also add two new qede IOV files [qede_sriov(.c|.h)]
under qede directory to add non-base driver IOV APIs/contents there.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
This patch defines various PCI config space access APIs
in order to read and find IOV specific PCI capabilities.
With these definitions implemented, it enables the base
driver to do SR-IOV specific initialization and HW specific
configuration required from PF-PMD driver instance.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Rasesh Mody <rmody@marvell.com>
In fm10k_rx_queue_setup(), we allocate memory for the queue
structure but not released when thresh check fails.
Fixes: 6cfe8969c969 ("fm10k: add Rx queue setup/release")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Descriptor valid mask should be 64-bit all ones, use
appropriate initializer type (unsigned long long) to
obtain correct value in 32-bit mode.
Fixes: deae85145c64 ("net/bnxt: handle multiple packets per loop in vector Rx")
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Adding support for VLAN based RSS hash. Two bytes of TCI field
will be considered for hashing.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Replace mmap() and munmap() APIs with EAL abstraction for the same.
Fixes: e1d9a02ad8f0 ("common/octeontx2: introduce common device class")
Cc: stable@dpdk.org
Signed-off-by: Sarosh Arif <sarosh.arif@emumba.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Scatter gather mode should get enabled:
- If mbuf size is less than max received packet length.
- MTU is reconfigured greater than mbuf size.
Fixes: 0e2efd02db58 ("net/octeontx2: add MTU set operation")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When building send command for a given descriptor it expects
it to contain the AURA identifier of the pool that it belongs
to rather than the pool identifier itself.
Fixes: 7f4116bdbb1c ("net/octeontx: add framework for Rx/Tx offloads")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
When sending commands to Kernel FPA PF driver, it expects the
aura to be in the range of 0 to 16 for a given FPA pool.
In OCTEON TX we map a pool,aura pair as single mempool handle,
always set the aura id to 0 for a given FPA pool.
Fixes: 179c7e893f64 ("mempool/octeontx: fix pool to aura mapping")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Currently, when calling the rte_flow_query API function to query the RSS
information, the queue related information is not as expected.
The root cause is that when application call the rte_flow_create API
function to create RSS action, the operation of storing the data whose typs
is struct rte_flow_action_rss is incorrect in the '.create' ops
implementation function named hns3_flow_create.
This patch fixes it by replacing memcpy with hns3_rss_conf_copy function to
store the RSS information in the hns3_flow_create.
Fixes: c37ca66f2b27 ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, when running the following commands in the CLI of testpmd
application, the driver reports an -EINVAL error when performing the No.3
step.
1) flow create 0 ingress pattern end actions rss key <key> func simple_xor
types all end / end
2) flow flush 0
3) port config dcb vt off pfc off
The root cause as below:
In the No.2 step, when RSS rules is flushed, we set the the flag
hw->rss_dis_flag with true to indicate RSS id disabled. And in the No.3
step, calling rte_eth_dev_configure API function, the internal function
named hns3_dev_rss_hash_update check hw->rss_dis_flag is true and return
-EINVAL.
When user calls the rte_eth_dev_configure API function with the input
parameter dev_conf->rxmode.mq_mode having ETH_MQ_RX_RSS_FLAG to enable RSS,
driver should set internal flag hw->rss_dis_flag with false to indicate RSS
is enabled in the '.dev_configure' ops implementation function named
hns3_dev_configure and hns3vf_dev_configure.
Fixes: 5e782bc2570c ("net/hns3: fix configuring RSS hash when rules are flushed")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
When user create a flow without RSS by calling rte_flow_create API and then
destroy it by calling rte_flow_flush API, driver should not clear RSS rule.
A reasonable handling method is that when user creates an RSS rule, the
driver should clear the created RSS rule when flushing destroy all flow
rules. Also, hw->rss_info should save the RSS config of the last success
RSS rule. When create n RSS rules, the RSS should not be disabled before
the last RSS rule destroyed.
Fixes: c37ca66f2b27 ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
When user specifies RSS queue num for 0 in action list by flow create API,
it should create a valid flow rule. The following flow rule should be
success in the command line of the testpmd application:
flow create 0 <pattern> actions rss queues / end
Fixes: c37ca66f2b27 ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currnetly, when user create a flow RSS rule and then flush the rule, driver
will set 0 for the internal structure of hw->rss_info maintained in driver.
And then user create a flow RSS rule without specified RSS hash key, driver
configure a validate RSS hash key into hardware network engine and will
cause an RSS error. The related steps when using testpmd as
follows:
flow 0 <pattern> action rss xx end / end
flow flush 0
flow 0 <pattern> action rss queues 0 1 end / end
To slove the preceding problem, the flow flush processing is modified.
it don't clear all RSS configurations for hw->rss_info. Actually the RSS
key information in the hardware is not cleared, therefore, the
hw->rss_info.key is kept consistent with the value in the hardware. In
addition, because reset the redirection table, we need to set queues NULL
and queue_num for zero that indicate the corresponding parameters in the
hardware is unavailable. Also we set hw->rss_info.func to
RTE_ETH_HASH_FUNCTION_MAX that indicate it is invalid.
Fixes: c37ca66f2b27 ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch support for hash type input set configuration. That is, upper
level application can call the rte_flow_create or
rte_eth_dev_rss_hash_update API to set the specified tuples by RSS types.
As a result, the hardware can selectively use the tuples to perform hash
calculation based on the specific tuple to enable the fields.
The following uses the RSS flow as an example:
When application calls the rte_flow_create API to select tuple input for
ipv4-tcp l3-src-only, the driver can enable the ipv4-tcp src field of the
hardware register by calling the internal function named
hns3_set_rss_tuple_by_rss_hf according to the RSS types in actions list.
In testpmd application, the command as follows:
testpmd> flow create 0 ingress pattern end actions rss types \
ipv4-tcp l3-src-only end queues 1 3 end / end
The following use the rte_eth_dev_rss_hash_update as an example:
if the user set the select tuple input for ipv4-tcp l3-src-only by
rte_eth_rss_conf structure in rte_eth_dev_rss_hash_update. the next
flow is the same as that of the RSS flow. In testpmd application,
the command as follows:
testpmd> port config all rss ipv4-tcp l3-src-only
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch adds checking the input RSS type when creating a flow with RSS.
If the input RSS type are not supported based on hns3 network engine, an
error is returned.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch enables to query some RSS configurations of the specified
rule. For example, show RSS hash function and rss types.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Kunpeng 930 hardware support spread packets to region of queues which can
be configured by FDIR rule, it means user can create one FDIR rule which
action is one region of queues, and then RSS use the region info to spread
packets.
As we know, RTE_FLOW_ACTION_TYPE_RSS is used to spread packets among
several queues, user could config such as func/level/types/key/queue
parameter to control RSS function, so we provide this feature under the
RTE_FLOW_ACTION_TYPE_RSS framework.
Consider RSS input tuple don't have eth header, we use the following
rule to distinguish them (whether it's queue region configuration or
rss general configuration):
Case 1: pattern have ETH and action's queue_num > 0, indicate it is
queue region configuration.
Case other: rss general configuration.
So if user want to configure one flow which ipv4=192.168.1.192 spread to
queue region of queue 0/1/2/3, the patter should:
RTE_FLOW_ITEM_TYPE_ETH with spec=last=mask=NULL
RTE_FLOW_ITEM_TYPE_IPV4 with spec=192.168.1.192 last=mask=NULL
RTE_FLOW_ITEM_TYPE_END
the action should:
RTE_FLOW_ACTION_TYPE_RSS with queue_num=4 queue=0/1/2/3
RTE_FLOW_ACTION_TYPE_END
after calling rte_flow_create, one FDIR rule will be created.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch solves the redundant operation during traversal. In the internal
function named hns3_error_int_stats_add for adding error statistics,
because only one statistical item will be found in the for loop statement,
a break can be executed after finding the error statistical item without
traversing the remaining table entries.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch solves the static check warning in the internal function named
hns3_fd_convert_tuple as follow:
"The switch statement must have a 'default' branch".
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
According to the protocol of PCIe, FLR to a PF device resets the PF state
as well as the SR-IOV extended capability including VF Enable which means
that VFs no longer exist.
When PF device is in FLR reset stage, at this time, the register state
of VF device is not reliable, so VF device's register state detection
is not carried out in PF FLR.
In this case, we just ignore the register states to avoid accessing
nonexistent register and return false in the internal function named
hns3vf_is_reset_pending to indicate that there are no other reset states
that need to be processed by PMD driver.
Fixes: 2790c6464725 ("net/hns3: support device reset")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
In kunpeng 920, when process pkts which need TSO, the network driver
need to erase the L4 len value of the TCP TSO pseudo header and
recalculate the pseudo header checksum. kunpeng930 support not need
to erase the L4 len value of the TCP TSO pseudo header.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
