Add check in the Tx packet preparation function, to guarantee that the
packet with specific user priority is distributed to the correct Tx
queue according to the configured Tx queue TC mapping.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch added the support for VF to config the ETS-based Tx QoS,
including querying current QoS configuration from PF and config queue TC
mapping. PF QoS is configured in advance and the queried info is
provided to the user for future usage. VF queues are mapped to different
TCs in PF through virtchnl.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Signed-off-by: Ting Xu <ting.xu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Support AVF RSS for inner header of GRE tunnel packet. It supports
RSS based on fields inner IP src + dst address and TCP/UDP src + dst
port.
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds IPV4/IPV6 SRC/DST input set for ESP to support
outer IP match.
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add common devargs key definition for "bus", "class" and "driver".
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The new allocated mbuf should be updated to the SW
ring.
Fixes: a2b29a7733 ("net/avf: enable basic Rx Tx")
Fixes: b8b4c54ef9 ("net/iavf: support flexible Rx descriptor in normal path")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Performance improvement: use a write combining store
instead of a regular mmio write to update queue tail
registers.
Signed-off-by: Gordon Noonan <gordon.noonan@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The array rss_key has size 'vf->vf_res->rss_key_size', the array index
should be less than that.
Cc: stable@dpdk.org
Fixes: 69dd4c3d08 ("net/avf: enable queue and device")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The VF reset can be triggered by the PF reset event, then the PCI bus
master will be cleared, the VF will be not allowed to issue any Memory
or I/O Requests.
So after the reset event is detected, always enable the PCI bus master.
And if failed, the device or system may be in an invalid state, so keep
the VF reset state to mark it as I/O error.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The QW0 of Tx context descriptor should be reset to 0, otherwise the
previous hardware writeback value may pollute the next context descriptor
write.
Fixes: a2b29a7733 ("net/avf: enable basic Rx Tx")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Let's try to enforce the convention where most drivers use a pmd. logtype
with their class reflected in it, and libraries use a lib. logtype.
Introduce two new macros:
- RTE_LOG_REGISTER_DEFAULT can be used when a single logtype is
used in a component. It is associated to the default name provided
by the build system,
- RTE_LOG_REGISTER_SUFFIX can be used when multiple logtypes are used,
and then the passed name is appended to the default name,
RTE_LOG_REGISTER is left untouched for existing external users
and for components that do not comply with the convention.
There is a new Meson variable log_prefix to adapt the default name
for baseband (pmd.bb.), bus (no pmd.) and mempool (no pmd.) classes.
Note: achieved with below commands + reverted change on net/bonding +
edits on crypto/virtio, compress/mlx5, regex/mlx5
$ git grep -l RTE_LOG_REGISTER drivers/ |
while read file; do
pattern=${file##drivers/};
class=${pattern%%/*};
pattern=${pattern#$class/};
drv=${pattern%%/*};
case "$class" in
baseband) pattern=pmd.bb.$drv;;
bus) pattern=bus.$drv;;
mempool) pattern=mempool.$drv;;
*) pattern=pmd.$class.$drv;;
esac
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
$ git grep -l RTE_LOG_REGISTER lib/ |
while read file; do
pattern=${file##lib/};
pattern=lib.${pattern%%/*};
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern',/RTE_LOG_REGISTER_DEFAULT(\1,/' $file;
sed -i -e 's/RTE_LOG_REGISTER(\(.*\), '$pattern'\.\(.*\),/RTE_LOG_REGISTER_SUFFIX(\1, \2,/' $file;
done
Signed-off-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The new VIRTCHNL_VF_OFFLOAD_VLAN_V2 capability added support that allows
the PF to set the location of the RX VLAN tag for stripping offloads.
So the VF needs to extract the VLAN tag according to the location flags.
This patch is the fix for AVX512 path, as AVX2 is already fixed.
Fixes: 9c9aa00403 ("net/iavf: add offload path for Rx AVX512 flex descriptor")
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Tested-by: Qin Sun <qinx.sun@intel.com>
When start port, all MAC addresses will be set. We should set the MAC
type of default MAC address as VIRTCHNL_ETHER_ADDR_PRIMARY.
Fixes: b335e72034 ("net/iavf: fix lack of MAC type when set MAC address")
Cc: stable@dpdk.org
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
A performance drop is caused by that the RX scalar path
is selected when AVX512 is disabled and some HW offload
is enabled.
Actually, the HW offload is supported by AVX2 and SSE.
In this scenario AVX2 path should be chosen.
This patch removes the offload related check for SSE and AVX2
as SSE and AVX2 do support the offload features.
No implementation change about the data path.
Fixes: eff56a7b9f ("net/iavf: add offload path for Rx AVX512")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Leverage the behavior of the scalar path, preparing
packets is necessary for vector paths which support checksum
offload.
Fixes: 059f18ae2a ("net/iavf: add offload path for Tx AVX512")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When the command sent by VF to PF fails, iavf may need to run
different code paths according to the specific reason of the
failure (not supported or other reasons).
This patch adds support of identifying PF return error type.
Fixes: 22b123a36d ("net/avf: initialize PMD")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
When the default RSS is disabled during initialization, the RSS should
be turned on when creating RSS rule.
This patch adds support to configure RSS key and lookup table even
when the default RSS is disabled.
Fixes: c678299594 ("net/iavf: fix default RSS configuration")
Cc: stable@dpdk.org
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The iavf does not support configuring RSS type on i40e VF,
because the i40e kernel driver does not support
VIRTCHNL_VF_OFFLOAD_ADV_RSS_PF capability.
This patch adds support of RSS type configuration for i40e VF by
sending VIRTCHNL_OP_SET_RSS_HENA message to the PF after checking
that the PF does not support VIRTCHNL_VF_OFFLOAD_ADV_RSS_PF
capability.
Fixes: c678299594 ("net/iavf: fix default RSS configuration")
Cc: stable@dpdk.org
Signed-off-by: Alvin Zhang <alvinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The i40evf PMD will be deprecated, iavf will be the only VF driver for
Intel 700 serial (i40e) NIC family.
To reach this, there will be 2 steps:
Step 1: iavf will be the default VF driver, while i40evf still can be
selected by devarg: "driver=i40evf".
This is covered by this patch, which include:
1) add all 700 serial NIC VF device ID into iavf PMD
2) skip probe if devargs contain "driver=i40evf" in iavf
3) continue probe if devargs contain "driver=i40evf" in i40evf
Step 2: i40evf and related devarg are removed, this will happen at DPDK
21.11
Between step 1 and step 2, no new feature will be added into i40evf
except bug fix.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
When set default MAC address, use type VIRTCHNL_ETHER_ADDR_PRIMARY as this
case is changing device/primary unicast MAC. For other cases, such as
adding or deleting extra unicast addresses and multicast addresses, use
type VIRTCHNL_ETHER_ADDR_EXTRA.
Fixes: cb25d4323f ("net/avf: enable MAC VLAN and promisc ops")
Cc: stable@dpdk.org
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Tested-by: Yan Xia <yanx.xia@intel.com>
Add a specific path for RX AVX512 (flexible descriptor).
In this path, support the HW offload features, like,
checksum, VLAN stripping, RSS hash.
This path is chosen automatically according to the
configuration.
'inline' is used, then the duplicate code is generated
by the compiler.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add a specific path for RX AVX512 (traditional).
In this path, support the HW offload features, like,
checksum, VLAN stripping, RSS hash.
This path is chosen automatically according to the
configuration.
'inline' is used, then the duplicate code is generated
by the compiler.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add a specific path for TX AVX512.
In this path, support the HW offload features, like,
checksum insertion, VLAN insertion.
This path is chosen automatically according to the
configuration.
'inline' is used, then the duplicate code is generated
by the compiler.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add the offload flag for RX queues to know which offload
features are set.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Fix segment fault when failing to get the memory from the pool.
If there's no memory in the default cache, fall back to the
previous process.
The previous AVX2 rearm function is changed to add some AVX512
instructions and changed to a callee of the AVX2 and AVX512
rearm functions.
Fixes: 31737f2b66 ("net/iavf: enable AVX512 for legacy Rx")
Cc: stable@dpdk.org
Reported-by: David Coyle <david.coyle@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Tested-by: David Coyle <david.coyle@intel.com>
New FDIR parsing are added to handle the fragmented IPv4/IPv6 packet.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
According to Intel® AVF spec
(https://www.intel.com/content/dam/
www/public/us/en/documents/product-specifications/
ethernet-adaptive-virtual-function-hardware-spec.pdf)
section 2.2.2.3:
The max segment size(MSS) of TSO should not be set lower than 88.
Fixes: a2b29a7733 ("net/avf: enable basic Rx Tx")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Fix pkt_len parsing when DEV_RX_OFFLOAD_KEEP_CRC is set in AVX512 path.
Fixes: 31737f2b66 ("net/iavf: enable AVX512 for legacy Rx")
Fixes: 6df587028e ("net/iavf: enable AVX512 for flexible Rx")
Cc: stable@dpdk.org
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Tested-by: David Coyle <david.coyle@intel.com>
Implement support for the power management API by implementing a
`get_monitor_addr` function that will return an address of an RX ring's
status bit.
This patch is basically a cut-and-paste of the changes already
committed in ixgbe, i40e and ice drivers in 21.02. This extends
the availability of the power-saving mechanism to the iavf driver,
which is needed for those use-cases using virtual functions.
Patchset where PMD Power Management added in 21.02:
http://patchwork.dpdk.org/project/dpdk/list/?series=14756
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Since rte_flow is the only API for filtering operations,
the legacy driver interface filter_ctrl was too much complicated
for the simple task of getting the struct rte_flow_ops.
The filter type RTE_ETH_FILTER_GENERIC and
the filter operarion RTE_ETH_FILTER_GET are removed.
The new driver callback flow_ops_get replaces filter_ctrl.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch change judgment statements to disable RSS for vf
when users need to disable RSS or RSS hash function configured
is not supported.
Fixes: 95f2f0e9fc ("net/iavf: improve default RSS")
Cc: stable@dpdk.org
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Rename PKT_RX_EIP_CKSUM_BAD to PKT_RX_OUTER_IP_CKSUM_BAD and
deprecate the original name. The new name is better aligned
with existing PKT_RX_OUTER_* flags, which should help reduce
confusion about its use.
Suggested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The new VIRTCHNL_VF_OFFLOAD_VLAN_V2 capability added support that allows
the PF to set the location of the RX VLAN tag for stripping offloads.
So the VF needs to extract the VLAN tag according to the location flags.
Fixes: 1c301e8c3c ("net/iavf: support new VLAN capabilities")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: Leyi Rong <leyi.rong@intel.com>
Tested-by: Wei Xie <weix.xie@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The new VIRTCHNL_VF_OFFLOAD_VLAN_V2 capability allows PF to set the
location of TX VLAN insertion.
So VF needs to insert VLAN tag according to the location flags.
Fixes: 1c301e8c3c ("net/iavf: support new VLAN capabilities")
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add advanced RSS offloads check due to some legacy driver (kernel/DPDK
PF) does not support virtual channel command VIRTCHNL_OP_RSS_HENA with
hena = 0 and VIRTCHNL_OP_ADD_RSS_CFG.
Fixes: 95f2f0e9fc ("net/iavf: improve default RSS")
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Instead of returning error on VLAN init failure, just log the error, so
that the VF device can continue to be configured.
Fixes: 1c301e8c3c ("net/iavf: support new VLAN capabilities")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
If the underlying PF doesn't support a specific ethertype or the ability
to toggle VLAN insertion and/or stripping, then prevent the VF sending
an invalid message to the PF.
Fixes: 1c301e8c3c ("net/iavf: support new VLAN capabilities")
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
For AVF with single VLAN mode (SVM), port VLAN stripping config
has already been disabled by PF. In this scenario, the error of
-ENOTSUP can be ignored.
Fixes: 1c301e8c3c ("net/iavf: support new VLAN capabilities")
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Since the VLAN offload virtchnl message name has been renamed to setting
style, the internal Ethernet type setting name needs be changed to avoid
confusing.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
