When choosing a vector path to take, an extra condition must be
satisfied to ensure the max SIMD bitwidth allows for the CPU enabled
path.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
When choosing a vector path to take, an extra condition must be
satisfied to ensure the max SIMD bitwidth allows for the CPU enabled
path.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When choosing a vector path to take, an extra condition must be
satisfied to ensure the max SIMD bitwidth allows for the CPU enabled
path.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Reviewed-by: Bruce Richardson <bruce.richardson@intel.com>
When choosing a vector path to take, an extra condition must be
satisfied to ensure the max SIMD bitwidth allows for the CPU enabled
path.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When choosing a vector path to take, an extra condition must be
satisfied to ensure the max SIMD bitwidth allows for the CPU enabled
path.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
When choosing a vector path to take, an extra condition must be
satisfied to ensure the max SIMD bitwidth allows for the CPU enabled
path.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Somnath Kotur <somnath.kotur@broadcom.com>
When choosing a vector path to take, an extra condition must be
satisfied to ensure the max SIMD bitwidth allows for the CPU enabled
path.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Amaranath Somalapuram <asomalap@amd.com>
When choosing a vector path to take, an extra condition must be
satisfied to ensure the max SIMD bitwidth allows for the CPU enabled
path.
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Previously, SEC_ERA was hardcoded and it was removed in [1].
Now when that hardcoded was removed, it is supposed to be
read from the device tree but it is not done correctly.
This patch calls a necessary API of_init() before using any
of_* APIs to retrieve information from the device tree and
if reading integer value that must be converted to cpu endianness
before using it.
[1] eef9e0412a ("drivers/crypto: fix build with -fno-common")
Fixes: 1d678de329 ("crypto/caam_jr: add basic job ring routines")
Cc: stable@dpdk.org
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
In this condition, user needs to check if dma transfer is completed
by its own logic.
qDMA FLE pool is not used in this condition since there is no chance to put
FLE back to pool without dequeue response.
User application is responsible to transfer FLE memory to qDMA driver
by qdma job descriptor and maintain it as well.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
Don't mix SG/none-SG with same FLE pool format,
otherwise, it impacts none-SG performance.
In order to support SG queue and none-SG queue
with different FLE pool element formats, associate
FLE pool with queue instead of device.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
This patch add support to add Scatter Gather support
for different jobs for qdma queues.
It also supports gathering multiple enqueue jobs into SG enqueue job(s).
Signed-off-by: Jun Yang <jun.yang@nxp.com>
This patch moves qdma queue specific configurations from driver
global configuration to per-queue setup. This is required
as each queue can be configured differently.
Signed-off-by: Jun Yang <jun.yang@nxp.com>
dpaa2_qdma was partially using direct pmd APIs.
This patch changes that and adapt the driver to use
more of the rawdev APIs
Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
There is a null pointer check in 'idxd_vdev_parse_params()' which is
causing a coverity issue. This check is redundant as the same check is
being done in 'rte_kvargs_free()', so it is simply removed in this patch.
In addition, kvlist was only being free'd on one path in this function.
This is fixed by always free'ing kvlist before returning.
Coverity issue: 363049
Fixes: 777edf43ae ("raw/ioat: introduce vdev probe for DSA/idxd device")
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
The 'idxd' pointer in 'idxd_rawdev_destroy()' is being dereferenced before
it is checked. To fix this, the null pointer check was moved to occur
earlier in the code.
Coverity issue: 363040
Fixes: ff06fa2cf3 ("raw/ioat: probe idxd PCI")
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Queue stats are stored in 'struct rte_eth_stats' as array and array size
is defined by 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag.
As a result of technical board discussion, decided to remove the queue
statistics from 'struct rte_eth_stats' in the long term.
Instead PMDs should represent the queue statistics via xstats, this
gives more flexibility on the number of the queues supported.
Currently queue stats in the xstats are filled by ethdev layer, using
some basic stats, when queue stats removed from basic stats the
responsibility to fill the relevant xstats will be pushed to the PMDs.
During the switch period, temporary 'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS'
device flag is created. Initially all PMDs using xstats set this flag.
The PMDs implemented queue stats in the xstats should clear the flag.
When all PMDs switch to the xstats for the queue stats, queue stats
related fields from 'struct rte_eth_stats' will be removed, as well as
'RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS' flag.
Later 'RTE_ETHDEV_QUEUE_STAT_CNTRS' compile time flag also can be
removed.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Change eth_dev_stop_t return value from void to int.
Make eth_dev_stop_t implementations across all drivers to return
negative errno values if case of error conditions.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
rte_eth_dev_stop() return value was changed from void to int,
so this patch modify usage of this function across net/failsafe
according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
rte_eth_dev_stop() return value was changed from void to int,
so this patch modify usage of this function across net/bonding
according to new return type.
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The API function rte_eth_dev_close() was returning void.
The return type is changed to int for notifying of errors.
If an error happens during a close operation,
the status of the port is undefined,
a maximum of resources having been freed.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Liron Himi <lironh@marvell.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The function rte_eth_dev_release_port() is partially resetting
the struct rte_eth_dev. The drivers were completing this reset
with more pointers set to NULL in the close or remove operations.
More pointers are reset at ethdev level,
and some redundant assignments are removed from PMDs.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
When closing a port, it is supposed to be already stopped,
and marked as such with "dev_started" state zeroed by the stop API.
Resetting "dev_started" before calling the driver close operation
was hiding the case of not properly stopped port being closed.
The flag "dev_started" is not changed anymore in "rte_eth_dev_close()".
In case the "dev_stop" function is called from "dev_close",
bypassing "rte_eth_dev_stop()" API,
the "dev_started" state must be explicitly reset in the PMD
in order to keep the same behaviour.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Currently there are limitations in the virthcnl.h interface that only
allow a maximum of 16 queues to be used by a VF driver. Add support in
virtchnl.h to allow a VF driver to request >16 queues. Also, the RSS
qregion size is currently assumed to be the max number of queues a VF
can request and/or is given on initialization. With larger VFs this
assumption can no longer be made, so add a new op to support querying
the max RSS qregion size.
In order to request more queues than the initially given queues the VF
driver needs to use the VIRTCHNL_OP_REQUEST_QUEUES opcode.
The VF is given more >16 queues it should use the new
VIRTCHNL_OP_GET_MAX_RSS_QREGION to determine its max qregion size. This
is needed to correctly configure the RSS LUT and/or configure filters
based on queue base/offset and queue region size.
If the VF is configuring >16 queues it should use the following opcodes
to configure the qeueus and interrupts after successfully requesting
them.
VIRTCHNL_OP_MAP_QUEUE_VECTOR
VIRTCHNL_OP_ENABLE_QUEUES_V2
VIRTCHNL_OP_DISABLE_QUEUES_V2
Also, add support in virtchnl_vc_validate_vf_msg() to validate the above
messages. As a part of this move the virtchnl_vector_limits enumeration
directly above the function it's used.
The patch also update base code release version in readme.
Signed-off-by: Ting Xu <ting.xu@intel.com>
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
When transmitting indirect descriptors, first desc will store net_hdr
and following descs will be mapped to mbuf segments. Total desc number
will be seg_num plus one. Meaning of variable needed is the number of
used descs in packed ring. This value will always be two for indirect
desc. Now use mbuf segments number for calculating correct desc length.
Fixes: b473061b0e ("net/virtio: fix indirect descriptors in packed datapaths")
Cc: stable@dpdk.org
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The HWRM supports only one global destination port for a tunnel type.
When port is stopped, driver deletes the UDP tunnel port configured
in the HW, but it does not update the counter which causes the
tunnel port addition to fail after port is started again.
Fixed to update the counter when tunnel port is deleted.
Fixes: 10d074b202 ("net/bnxt: support tunneling")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
This patch adds SVE vector instructions to optimize Tx burst process.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Translate the attribute of sample action that include sample ratio
and sub actions list.
PMD will check the destination action number in current flow,
if found multiple destination actions, then create the new destination
array rdma action that group actions for each destination.
Currently only support port or queue for destination action, and only
encap action can be attached into one port destination.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Mirroring flow using sample action with ratio is 1, and it doesn't
support jump action with the same one flow.
Sample action must have destination actions like port or queue for
mirroring, and don't need split function as sampling flow.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The new DR destination array action is supported since the
rdma-core version v32.
Destination array action is used group DR actions to a single action,
And it can be used for mirroring packet and forward to every
destination (port or queue) in the array.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Translate the attribute of sample action that include sample ratio
and sub actions list, then create the sample DR action.
The metadata register value will be lost in the default path after
Sampler in FDB due to CX5 HW limitation.
Since source vport also be shared with metadata register c0, MLX5
PMD would set the source vport to rdma-core and rdma-core will
restore the regc0 value after sampler.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The flow with sample action will be split into two sub flows:
the prefix sub flow with the all actions preceding the sample
action and sample action itself, and the suffix sub flow with
the actions following the sample action.
The original items remain in the prefix sub flow, add the
implicit tag action with unique id to set in metadata register,
and suffix sub flow uses the tag item to match with that unique id.
The flow split as below:
Original flow: items / actions pre / sample / actions sfx ->
prefix sub flow -
items / actions pre / set_tag action / sample
suffix sub flow -
tag_item / actions sfx
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Add sample action validate function.
Sample Flow is supported in NIC-RX and FDB domains. For the NIC-RX
the Sample Flow action list must include the destination queue action.
Only NIC-RX domain supports the optional actions list. FDB doesn't
support any optional actions, the sampled packets is always forwarded
to the E-Switch manager port.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Update function mlx5_devx_cmd_query_hca_attr() to add the NIC Flow
Table attributes query, then get the log_max_flow_sampler_num from
flow table properties.
Add the related structs definition in mlx5_prm.h.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
The new DR sample action is supported since OFED version
5.1.2 or rdma-core version v32.
MLX5 PMD adds the rdma-core command in glue to create this action.
Sample action is used for creating the sample object to implement
the sampling/mirroring function.
Signed-off-by: Jiawei Wang <jiaweiw@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Store function control window offset to correctly set the offset
of prime EvQ in EF100.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Flow rules may be used mark packets. Support delivery of mark/flag
values to user in mbuf fields.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Riverhead allows to choose Rx prefix (which contains RSS hash value
and valid flag) per queue.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Riverhead FW supports Rx prefix choice based on required fields in Rx
prefix. The feature is generalized in libefx to provide Rx prefixes
layout for other NICs and firmware variants. Now driver can get
the prefix layout after Rx queue start and use the layout details to
check its expectations or simply in run-time.
Rx prefix choice and query interface is defined in SF-119689-TC
EF100 host interface.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
If RSS hash offload is requested, Rx queue should be configured
to request RSS hash information delivery.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
A new function allows to check if used Rx prefix layout matches
available Rx prefix layout. Length check is out-of-scope of the
function and caller should ensure length is either checked or
different length with everything required in place is handled
properly.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
When Rx queue is created, allow to specify if the driver would like
to get RSS hash value calculated by the hardware.
Use the flag to choose Rx prefix on Riverhead.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
