The number of Tx queues requested by the user must not be overridden;
instead, the limits imposed by TSO must be applied to the advertised
maximum
Fixes: fec33d5bb3 ("net/sfc: support firmware-assisted TSO")
Cc: stable@dpdk.org
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
The previous version relied on the fact that DMA sync for device and
PIO write barrier in pair. Now each does its job.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Remove RTE_LIBRTE_SFC_EFX_TSO config option since it is not
required any more:
- unreasonable limit on number of Tx queues when TSO is not
actually required should be solved using per-device parameter
- performance difference with and without TSO compiled in is small
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Alarms are not supported on the FreeBSD.
Application must poll link status periodically itself using
rte_eth_link_get_nowait() to avoid management event queue overflow.
Fixes: 2de39f4e13 ("net/sfc: periodic management EVQ polling using alarm")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Reviewed-by: Andy Moreton <amoreton@solarflare.com>
When the WQ is wrapped around, it wrongly checks the condition when
resetting the pointer. It should be compared against the end of the queue,
not the beginning of the queue. And this isn't even needed when the length
of the copying data crosses the boundary.
Fixes: fdcb0f5305 ("net/mlx5: use work queue buffer as a raw buffer")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The size of Rx RSS indirection table was limited by 256, but it is not
required anymore for all Mellanox NICs. However, the librte_ether still
limits the size by 512.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
On receiving a compressed session of Rx completion, prefetch every entries
to be invalidated. Also, invalidate consumed completions per every 8
mini-completions, not to wait until the last entry is consumed. This helps
to reduce jitter in rx_burst.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When no error reported in Rx descriptor, we should set CKSUM_GOOD flag
before return.
Fixes: b704f9071b ("net/i40e: implement new Rx checksum flag")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
While handling link status change (LSC) interrupt, all interrupts are
blocked until delayed interrupt handler finishes.
The wait duration is at least one second and this may cause timeouts in
VF to PF mailbox.
Make sure only LSC interrupt is blocked while waiting for delayed
interrupt handler to finish.
Fixes: 0a45657a67 ("pci: rework interrupt handling")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
efx_phy_adv_cap_set() sets all advertised phy capabilities including
pause capabilities which are also configured using efx_mac_fcntl_set().
If we set speed and autonegotiation capabilities only, we should
preserve already configured pause capabilities.
Fixes: d23f3a89ab ("net/sfc: support link speed and duplex settings")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Fixes: 886f8d8a05 ("net/sfc: retrieve link info")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
Fixes: 886f8d8a05 ("net/sfc: retrieve link info")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
In fact efx_port_poll() always initializes it, but it isn't
explicitly documented feature of the API. Moreover, the API
annocation suggests that return code should be checked.
Fixes: 886f8d8a05 ("net/sfc: retrieve link info")
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Andrew Lee <alee@solarflare.com>
When any layout is used, the header is stored in the head room of mbuf.
mbuf is allocated and filled by user, means there is no gurateen the
header is all zero for non TSO case. Therefore, we have to do the reset
by ourself:
memest(hdr, 0, head_size);
The memset has two impacts on performance:
- memset could not be inlined, which is a bit costly.
- more importantly, it touches the mbuf, which could introduce severe
cache issues as described by former patch.
Similiary, we could do the same trick: reset just when necessary, when
the corresponding field is already 0, which is likely true for a simple
l2 forward case. It could boost the performance up to 20+% in micro
benchmarking.
Cc: stable@dpdk.org
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
TSO is now enabled, but it's not actually being used by default in a
simple L2 forward mode. In such case, we have to zero the virtio net
headers, to inform the vhost backend that no offload is being used:
hdr->csum_start = 0;
hdr->csum_offset = 0;
hdr->flags = 0;
hdr->gso_type = 0;
hdr->gso_size = 0;
hdr->hdr_len = 0;
Such writes could be very costly; it introduces severe cache issues:
The above operations introduce cache write for each packet, which
stalls the read operation from the vhost backend.
The fact that virtio net header is initiated to zero in PMD driver
init stage means that these costly writes are unnecessary and could
be avoided:
if (hdr->csum_start != 0)
hdr->csum_start = 0;
And that's what the macro ASSIGN_UNLESS_EQUAL does. With this, the
performance drop introduced by TSO enabling is recovered: it could
be up to 20% in micro benchmarking.
Fixes: 58169a9c81 ("net/virtio: support Tx checksum offload")
Fixes: 696573046e ("net/virtio: support TSO")
Cc: stable@dpdk.org
Cc: Olivier Matz <olivier.matz@6wind.com>
Cc: Maxime Coquelin <maxime.coquelin@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Olivier Matz <olivier.matz@6wind.com>
The commit aed0b12930 ("net/vhost: fix socket file deleted on stop")
moves rte_vhost_driver_register and rte_vhost_driver_unregister from
dev_start() and dev_stop() into driver's probe() and remove().
Apps, like testpmd, using vhost pmd in server mode, usually calls
dev_stop() and dev_close() as quitting, instead of driver-specific
remove(). Then those unix socket files have no chance to get removed.
Semantically, device-specific things should be put into device-specific
APIs. Fix this issue by moving rte_vhost_driver_unregister, plus other
structure free into dev_close().
Fixes: aed0b12930 ("net/vhost: fix socket file deleted on stop")
Cc: stable@dpdk.org
Reported-by: Lei Yao <lei.a.yao@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Value returned from malloc is not checked for errors before being used.
This patch fixes following coverity issue.
static struct vhost_memory_kernel *
prepare_vhost_memory_kernel(void)
{
...
vm = malloc(sizeof(struct vhost_memory_kernel) +
max_regions *
sizeof(struct vhost_memory_region));
...
>>> CID 140744: (NULL_RETURNS)
>>> Dereferencing a null pointer "vm".
mr = &vm->regions[k++];
Coverity issue: 140744
Fixes: e3b434818b ("net/virtio-user: support kernel vhost")
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The vtpci_ops assignment needs the 'hw->port_id' as an input parameter.
That said, we should set 'hw->port_id' firstly, then do the vtpci_ops
assignment, while the code does reversely. That would result to a crash
when more than one virtio devices are used, because we keep assigning
proper vtpci_ops to virtio_hw_internal[0]->vtpci_ops, leaving the pointer
for other ports being NULL.
Reverse the order fixes this issue.
Fixes: 9470427c88 ("net/virtio: do not store PCI device pointer at shared memory")
Cc: stable@dpdk.org
Reported-by: Lei Yao <lei.a.yao@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Adds Makefile for scheduler cryptodev PMD, and updates existing
Makefiles. Different than other cryptodev PMDs, scheduler PMD
is required to be built as shared libraries.
Adds scheduler PMD enable and debug flags to config/common_base.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Implements all standard operations required for cryptodev,
and register them to cryptodev operation function pointer table.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Adds crypto scheduler's PMD's probe and remove function and the device's
enqueue and dequeue burst functions. A cryptodev scheduler PMD is
then registered in the end.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Implements round-robin scheduling mode and register into cryptodev
scheduler ops structure. This mode enqueues a burst of operation
to one of its slaves, and iterates the next burst to the other
slave. Same procedure is done on dequeueing operations.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Adds the implementations of the APIs for scheduler cryptodev PMD.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Adds a number of internal structures for the cryptodev scheduler PMD. The
structures include the scheduler context, slave, queue pair context,
and session.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Adds APIs and function prototypes for the scheduler PMD to perform extra
operations other than standard cryptodev APIs.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This makes struct rte_cryptodev independent of struct rte_pci_device by
replacing it with a pointer to the generic struct rte_device.
This is inline with the recent changes in ethdev
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: John Griffin <john.griffin@intel.com>
Reviewed-by: Shreyansh Jain <shreyansh.jain@nxp.com>
IFF_MULTI_QUEUE does not exist in older kernels:
drivers/net/tap/rte_eth_tap.c:143:19: error: ‘IFF_MULTI_QUEUE’ undeclared
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add two new feature flags:
* RTE_CRYPTODEV_FF_CPU_NEON
represents ARM NEON (TM) instructions
* RTE_CRYPTODEV_FF_CPU_ARM_CE
represents ARM crypto extensions
Add them to both cryptodev library, documentation and relevant
PMD driver for ARMv8.
Signed-off-by: Zbigniew Bodek <zbigniew.bodek@caviumnetworks.com>
This patch introduces crypto poll mode driver
using ARMv8 cryptographic extensions.
CPU compatibility with this driver is detected in
run-time and virtual crypto device will not be
created if CPU doesn't provide:
AES, SHA1, SHA2 and NEON.
This PMD is optimized to provide performance boost
for chained crypto operations processing,
such as encryption + HMAC generation,
decryption + HMAC validation. In particular,
cipher only or hash only operations are
not provided.
The driver currently supports AES-128-CBC
in combination with: SHA256 HMAC and SHA1 HMAC
and relies on the external armv8_crypto library:
https://github.com/caviumnetworks/armv8_crypto
Build ARMv8 crypto PMD if compiling for ARM64
and CONFIG_RTE_LIBRTE_PMD_ARMV8_CRYPTO option
is enable in the configuration file.
ARMV8_CRYPTO_LIB_PATH environment variable will
point to the appropriate library directory.
Signed-off-by: Zbigniew Bodek <zbigniew.bodek@caviumnetworks.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Current Cryptodev AES-NI GCM PMD is implemented using Multi Buffer
Crypto library.This patch reimplement the device using ISA-L Crypto
library: https://github.com/01org/isa-l_crypto.
The migration entailed the following additional support for:
* GMAC algorithm.
* 256-bit cipher key.
* Session-less mode.
* Out-of place processing
* Scatter-gatter support for chained mbufs (only out-of place and
destination mbuf must be contiguous)
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch adds a user defined name initializing parameter to cryptodev
library.
Originally, for software cryptodev PMD, the vdev name parameter is
treated as the driver identifier, and will create an unique name for each
device automatically, which is not necessarily as same as the vdev
parameter.
This patch allows the user to either create a unique name for his software
cryptodev, or by default, let the system creates a unique one. This should
help the user managing the created cryptodevs easily.
Examples:
CLI command fragment 1: --vdev "crypto_aesni_gcm_pmd"
The above command will result in creating a AESNI-GCM PMD with name of
"crypto_aesni_gcm_X", where postfix X is the number assigned by the system,
starting from 0. This fragment can be placed in the same CLI command
multiple times, resulting the postfixs incremented by one for each new
device.
CLI command fragment 2: --vdev "crypto_aesni_gcm_pmd,name=gcm1"
The above command will result in creating a AESNI-GCM PMD with name of
"gcm1". This fragment can be placed in the same CLI command multiple
times, as long as each having a unique name value.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch introduces RTE_CRYPTODEV_FF_MBUF_SCATTER_GATHER feature flag
informing that selected crypto device supports segmented mbufs natively
and doesn't need to be coalesced before crypto operation.
While using segmented buffers in crypto devices may have unpredictable
results, for PMDs which doesn't support it natively, additional check is
made for debug compilation.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
EVP_CIPHER_CTX_set_padding() function always returns 1, so the check is
unneeded.
Fixes: d61f70b4c9 ("crypto/libcrypto: add driver for OpenSSL library")
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Tested-by: Zhaoyan Chen <zhaoyan.chen@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch sets iv size in qat PMD to 12 bytes to be
conformant with nist SP800-38D.
Fixes: 26c2e4ad5a ("cryptodev: add capabilities discovery")
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch sets iv size in aesni gcm PMD to 12 bytes to be
conformant with nist SP800-38D.
Fixes: eec136f3c5 ("aesni_gcm: add driver for AES-GCM crypto operations")
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
This commit fixes pre-counter block (J0) padding by clearing
four most significant bytes before setting initial counter value.
Fixes: b2bb359747 ("crypto/aesni_gcm: move pre-counter block to driver")
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Release v0.44 of Intel(R) Multi-Buffer Crypto for IPsec library adds
support for AVX512 instructions. This patch enables the new AVX512
accelerated functions from the aesni_mb_pmd crypto poll mode driver.
This patch set requires that the aesni_mb_pmd is linked against the
version 0.44 or greater of the Multi-Buffer Crypto for IPsec library.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Update driver to use new AESNI Multibuffer IPSec library single
operation functionality (cipher only and authentication only).
This patch also adds tests for this new feature.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
When using sessionless crypto operations, crypto session
is obtained from a pool of sessions, when processing the
operation. Once the operation is processed, the session
is put back in the pool, but for the AESNI MB PMD, this
session was not being saved in the operation and therefore,
it did not return to the session pool.
Fixes: 924e84f873 ("aesni_mb: add driver for multi buffer based crypto")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Extra bytes are being written at end of data while process standard
openssl cipher encryption. This behaviour is unexpected.
This patch disable the padding feature in openssl library, which is
causing the problem.
Fixes: d61f70b4c9 ("crypto/libcrypto: add driver for OpenSSL library")
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
In out-of-place operation, data is DMAed from source mbuf
to destination mbuf. To avoid header data in dest mbuf being
overwritten, the minimal data-set should be DMAed.
Fixes: 39e0bee48e ("crypto/qat: rework request builder for performance")
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: John Griffin <john.griffin@intel.com>
The cryptodev API had specified that if the digest address field was
left empty on an authentication operation, then the PMD would assume
the digest was appended to the source or destination data.
This case was not handled at all by most PMDs and incorrectly handled
by the QAT PMD.
As no bugs were raised, it is assumed to be not needed, so this patch
removes it, rather than add handling for the case on all PMDs.
The digest can still be appended to the data, but its
address must now be provided in the op.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: John Griffin <john.griffin@intel.com>
Replace the raw I/O device memory read/write access with eal
abstraction for I/O device memory read/write access to fix portability
issues across different architectures.
CC: John Griffin <john.griffin@intel.com>
CC: Fiona Trahe <fiona.trahe@intel.com>
CC: Deepak Kumar Jain <deepak.k.jain@intel.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Replace the raw I/O device memory read/write access with eal
abstraction for I/O device memory read/write access to fix
portability issues across different architectures.
CC: Yong Wang <yongwang@vmware.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Replace the raw I/O device memory read/write access with eal
abstraction for I/O device memory read/write access to fix
portability issues across different architectures.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Replace the raw I/O device memory read/write access with eal
abstraction for I/O device memory read/write access to fix portability
issues across different architectures.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Replace the raw I/O device memory read/write access with eal
abstraction for I/O device memory read/write access to fix
portability issues across different architectures.
Suggested-by: Jan Medala <jan@semihalf.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Jan Medala <jan@semihalf.com>
Replace the raw I/O device memory read/write access with eal
abstraction for I/O device memory read/write access to fix
portability issues across different architectures.
CC: Harish Patil <harish.patil@cavium.com>
CC: Rasesh Mody <rasesh.mody@cavium.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Replace the raw I/O device memory read/write access with eal abstraction
for I/O device memory read/write access to fix portability issues across
different architectures.
CC: Stephen Hurd <stephen.hurd@broadcom.com>
CC: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Replace the raw I/O device memory read/write access with eal abstraction
for I/O device memory read/write access to fix portability issues across
different architectures.
CC: Harish Patil <harish.patil@cavium.com>
CC: Rasesh Mody <rasesh.mody@cavium.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Replace the raw I/O device memory read/write access with eal
abstraction for I/O device memory read/write access to fix
portability issues across different architectures.
CC: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Replace the raw I/O device memory read/write access with eal
abstraction for I/O device memory read/write access to fix
portability issues across different architectures.
CC: Alejandro Lucero <alejandro.lucero@netronome.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Replace the raw I/O device memory read/write access with eal
abstraction for I/O device memory read/write access to fix portability
issues across different architectures.
CC: John Daley <johndale@cisco.com>
CC: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Replace the raw I/O device memory read/write access with eal
abstraction for I/O device memory read/write access to fix
portability issues across different architectures.
CC: Jing Chen <jing.d.chen@intel.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Replace the raw I/O device memory read/write access with eal
abstraction for I/O device memory read/write access to fix
portability issues across different architectures.
CC: Helin Zhang <helin.zhang@intel.com>
CC: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Replace the raw I/O device memory read/write access with eal
abstraction for I/O device memory read/write access to fix
portability issues across different architectures.
CC: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
i40e PF host only support to work with DPDK VF driver, Linux
VF driver is not supported. This change will enhance in
configuring IRQ link list.
This Change will identify VF client by number of vector
requested. DPDK VF will ask only single one while Linux VF
will request at least 2. It will have different configuration
for different clients. DPDK VF will be configured to link all
queue together, while Linux VF will be configured per request.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
When VF requested to configure TX queue, a few parameters are
missed to be configured in PF host. This change have more
fields parsed and configured for TX context.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
PF host didn't return correct VSI id to VF.
This change fix it.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
i40e PF host only support to work with DPDK VF driver, Linux
VF driver is not supported. This change will enhance in version
number returned.
Current version info returned won't be able to be recognized
by Linux VF driver, change to values that both DPDK VF and Linux
driver can recognize.
The expense is original DPDK host specific feature like
CFG_VLAN_PVID and CONFIG_VSI_QUEUES_EXT will not available.
DPDK VF also can't identify host driver by version number returned.
It always assume talking with Linux PF.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
This patch add support to get/clear VF statistics
from PF side.
Two APIs are added:
rte_pmd_i40e_get_vf_stats.
rte_pmd_i40e_reset_vf_stats.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
When VF sends request to add a new MAC address, PF host
will check if it's a non-zero or unicast address, or it
will return with error. In fact, VF still can set multicast
address. This change remove to check if it's a unicast
address.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
add rte_pmd_i40e_set_vf_vlan_filter API.
User can call the API on PF to enable/disable
a set of VF's VLAN filters.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add rte_pmd_i40e_set_vf_vlan_tag API.
User can call the API on PF to enable/disable a specific
VF's VLAN tag.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support enabling/disabling VF broadcast mode from PF.
User can call the API on PF to enable/disable a specific
VF's broadcast mode.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support inserting VF VLAN id from PF.
User can call the API on PF to insert a VLAN id to a
specific VF.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add a function to configure vlan strip enable/disable for specific
SRIOV VF device.
Signed-off-by: Chen Jing D(Mark) <jing.d.chen@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
If PF sets vf->mac_addr, in VF initialization hw->mac.addr will be set
to that same value. It is possible to check if PF set a MAC address or
not through the hw->mac.addr variable.
hw->mac.addr set by i40e_vf_parse_hw_config(), call stack is:
In PF side
i40e_pf_host_process_cmd_get_vf_resources()
eth_addr_copy(vf->mac_addr, vf_res->vsi_res[0].default_mac_address)
In VF sise
i40evf_init_vf()
i40evf_get_vf_resources()
i40e_vf_parse_hw_config()
memcpy(hw->mac.addr, vsi_res->default_mac_addr)
Updated code is after i40evf_get_vf_resources() and can benefit from
hw->mac.addr variable.
Fixes: 89e6b86384 ("i40evf: rework MAC address validation")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support changing VF default MAC address.
This function is not supported if PF set the MAC
address for the PF.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support setting VF MAC address from PF.
User can call the API on PF to set a specific
VF's MAC address.
PF should set MAC address before VF initialized,
if PF sets the MAC address after VF initialized,
new MAC address won't be effective until VF
reinitialized.
This will remove all existing MAC filters.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add missing step during VF reset: PF should
set I40E_VFGEN_RSTAT to ACTIVE at end of the
VF reset operation or VF driver may not able
to detect that reset is already completed.
This patch also remove the unnecessary enum
for vfr state.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support enabling/disabling VF multicast promiscuous mode from
PF.
User can call the API on PF to enable/disable a specific
VF's multicast promiscuous mode.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support enabling/disabling VF unicast promiscuous mode from
PF.
User can call the API on PF to enable/disable a specific
VF's unicast promiscuous mode.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support enabling/disabling TX loopback from PF.
User can call the API on PF to enable/disable TX loopback
for all the PF and VFs.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support enabling/disabling VF VLAN anti-spoofing from
PF.
User can call the API on PF to enable/disable a specific
VF's VLAN anti-spoofing.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Support enabling/disabling VF MAC anti-spoofing from
PF.
User can call the API on PF to enable/disable a specific
VF's MAC anti-spoofing.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
The callback asks the user application if it is allowed to
perform the mailbox messages.
If the return value from user is RTE_PMD_I40E_MB_EVENT_PROCEED
then continue. If ACK or NACK, do nothing and send
not_supported to VF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Add an API to expose the ability, that PF can notify VF
when link status changes, to APP.
So if PF APP doesn't want to enable interruption but check
link status by itself, PF APP can let VF know link status
changed.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Mellanox PMDs do not differentiate IP header with or without options, so
the advertised packet type for an IPv4 should not be RTE_PTYPE_L3_IPV4,
which explicitly means "does not contain any header option".
Change the driver to set
RTE_PTYPE(_INNER)_L3_IPV4_EXT_UNKNOWN or
RTE_PTYPE(_INNER)_L3_IPV6_EXT_UNKNOWN flags for all IPv4/IPv6 packets
received.
Fixes: 429df3803a ("mlx4: replace some offload flags with packet type")
Fixes: 67fa62bc67 ("mlx5: support checksum offload")
Signed-off-by: Samuel Gauthier <samuel.gauthier@6wind.com>
Signed-off-by: Matthieu Ternisien d'Ouville <matthieu.tdo@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Retrieving link status information through the link update callback should
be quick and non-blocking.
Mellanox PMDs retrieve this information through ioctl() calls on the
related kernel netdevice. This appears to take a long time to
complete and may cause significant slowdowns in applications.
While these system calls cannot be accelerated, removing the lock on the
private structure allows applications to perform other control operations
from separate threads in the meantime. This function remains safe without
locking as it does not write the private structure, it is only used to
retrieve the name of the netdevice.
Signed-off-by: Matthieu Ternisien d'Ouville <matthieu.tdo@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
AF_PACKET has some flags to check on the receive side for 802.1Q
information. If present, we copy into the mbuf. For transmit, we
insert any 802.1Q information into the packet before copying to the ring.
Signed-off-by: Chas Williams <ciwillia@brocade.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add promiscuous support to the AF_PACKET PMD. The underlying Linux
device's IF_PROMISC flag is toggled to enable or disable.
Signed-off-by: Chas Williams <ciwillia@brocade.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The underlying Linux device's MTU is changed subject to the frame size
limitations during device creation.
Signed-off-by: Chas Williams <ciwillia@brocade.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This will be used by later changes to determine the underlying Linux
interface.
Signed-off-by: Chas Williams <ciwillia@brocade.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
clang reports this error message:
error: this function declaration is not a prototype
[-Werror,-Wstrict-prototypes]
Fixes: 5cdd769a26 ("qede: add L2 support")
Signed-off-by: Emmanuel Roullit <emmanuel.roullit@gmail.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
clang reports the following error:
error: logical not is only applied to the left hand side of this bitwise
operator. [-Werror,-Wlogical-not-parentheses]
Fixes: 92c8a63223 ("cxgbe: add device configuration and Rx support")
Signed-off-by: Emmanuel Roullit <emmanuel.roullit@gmail.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch adds a function to flush all the filter list
filter on a port.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
This patch adds a function to destroy the flow filter.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
This patch adds a function to create the flow directory filter.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
check if the rule is a flow director rule, and get the flow director info.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
check if the rule is a L2 tunnel rule, and get the L2 tunnel info.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
check if the rule is a TCP SYN rule, and get the SYN info.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
check if the rule is a ethertype rule, and get the ethertype info.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add rule validate function and check if the rule is a n-tuple rule,
and get the n-tuple info.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for flush all the filters in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for store and restore L2 tunnel filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for restoring L2 tunnel filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for storing flow director filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for restoring TCP SYN filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for restoring ether type filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for restoring n-tuple filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for storing L2 tunnel filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for storing flow director filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Add support for storing TCP SYN filter in SW.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Fix typo when checking that no VLAN offload flags are passed at port
initialization.
By the way, also fix a typo in the log.
Fixes: d4a27a3b09 ("nfp: add basic features")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Set the MDIO (Management Data Input/Output Interface) read/write
function pointers for Marvell PHYs on some X550 platforms to use
the clause 22 functions. Marvell PHYs do not support clause 45.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Add initial support for Marvell 1000BASE-T PHYs on some X550 platforms.
Firmware owns the link config for Marvell PHYs on these platforms,
software should not touch it.
Also these platforms are not capable of speeds lower than 1Gb.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Ensure that the advertised link speeds are configured for KR/KX
backplane on some new platform.
Without this patch the link remains at 1G when resuming from low power
after being downshifted by LPLU (Low Power Link Up).
This patch ensures that the advertised speeds are not changed for
2.5G configurations.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Add initial support for a XFI backplane interface on some new platforms.
The XFI backplane requires a custom tuned link. Hardware/Firmware owns
the link config for XF backplane and software must not interfere.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Add checks to rte_pmd_ixgbe_* API's to ensure that the port
is an ixgbe port.
Fixes: 49e248223e ("net/ixgbe: add API for VF management")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Remove __rte_unused attributes in function declaration when
the parameters really are used.
Fixes: dfbd6a9cb5 ("net/enic: extend flow director support for 1300 series")
Signed-off-by: John Daley <johndale@cisco.com>
Use the new L3 and L4 ..CKSUM_GOOD and ..CKSUM_UNKNOWN flags to
distinguish good checksums from unknown ones.
Signed-off-by: John Daley <johndale@cisco.com>
Join message lines for easier grepping.
PRIxXX are left glued to strings as they are in other parts of the file.
Signed-off-by: Michał Mirosław <michal.miroslaw@atendesoftware.pl>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The enic TSO implementation requires that the length of the Eth/IP/TCP
headers be passed to the NIC. Other than that, it's just a matter of
setting the mss and offload mode on a per packet basis.
In TSO mode, IP and TCP checksums are offloaded even if not requested
with mb->ol_flags.
Signed-off-by: John Daley <johndale@cisco.com>
The function name ixgbe_vmdq_mode_check is not right.
This function checks if Virtualization Technology is
enabled. It's for both VMDq and IOV.
Others may be misled by the current name.
Fixes: fe3a45fd41 ("ixgbe: add VMDq support")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
In function "reassemble_packets()", the statement "end = secondlast;"
is redundant since there is another assignment "start = end = NULL;"
3 lines below. BTW, I removed the redundant braces in the conditional
statement "if (end->data_len > rxq->crc_len)".
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
When freeing up last mbuf, start->nb_segs should be decremented
by one. See also ixgbe process.
Fixes: 0e0da28cd8 ("i40e: add vector scatter Rx")
Signed-off-by: Chenghu Yao <yao.chenghu@zte.com.cn>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
When using the same file descriptor for both rx and tx, the
eth_dev_stop function would close the same fd twice. This
change prevents that from happening.
Fixes: 364e08f2bb ("af_packet: add PMD for AF_PACKET-based virtual devices")
Signed-off-by: Timmons C. Player <timmons.player@spirent.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add support for PCI IDs which was removed as a part of
commit 0e7bd0b2d6 ("net/bnxt: remove support for few devices")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The only reason why bulk alloc disabled for the rings with
more than (IXGBE_MAX_RING_DESC - RTE_PMD_IXGBE_RX_MAX_BURST)
descriptors is the possible out-of-bound access to the dma
memory. But it's the artificial limit and can be easily
avoided by allocating of RTE_PMD_IXGBE_RX_MAX_BURST more
descriptors in memory. This will not interfere the HW and,
as soon as all rings' memory zeroized, Rx functions will
work correctly.
This change allows to use vectorized Rx functions with
4096 descriptors in Rx ring which is important to achieve
zero packet drop rate in high-load installations.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The only reason why bulk alloc disabled for the rings with
more than (I40E_MAX_RING_DESC - RTE_PMD_I40E_RX_MAX_BURST)
descriptors is the possible out-of-bound access to the dma
memory. But it's the artificial limit and can be easily
avoided by allocating of RTE_PMD_I40E_RX_MAX_BURST more
descriptors in memory. This will not interfere the HW and,
as soon as all rings' memory zeroized, Rx functions will
work correctly.
This change allows to use vectorized Rx functions with
4096 descriptors in Rx ring which is important to achieve
zero packet drop rate in high-load installations.
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add PCI device ID for ConnectX-5 and enable multi-packet send for PF and VF
along with changing documentation and release note.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
If value of number of rxq/txq is different than
RTE_ETHDEV_QUEUE_STAT_CNTRS, limit per queue
stats/xstats to minimum of the two.
Fixes: 7634c5f915 ("net/qede: add queue statistics")
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Allocate double the number of fastpath status block index
since the PF RX/TX queues are not sharing the status block.
This is an interim solution till other parts of the code
is modified to handle the same.
Fixes: f1e4b6c0ac ("net/qede: fix status block index for VF queues")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
- Fix minimum RX buffer size to 1024B
- Force enable scatter/gather mode if given RX buf size is lesser than MTU
- Adjust RX buffer size to cache-line size with overhead included
Fixes: bec0228816 ("net/qede: support scatter gather")
Fixes: 2ea6f76aff ("qede: add core driver")
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
This patch adds i40e_flow_flush_tunnel_filter
function to flush all tunnel filters, including
filters in SW and HW.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds i40e_flow_flush_ethertype_filter
function to flush all ethertype filters, including
filters in SW and HW.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds i40e_flow_flush function to flush all
filters for users. And flow director flush function
is involved first.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds i40e_flow_destroy_tunnel_filter
function to destroy a tunnel filter for users.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds i40e_flow_destroy_ethertype_filter
function to destroy a ethertype filter for users.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
