When Receive Side Coalescing (RSC) is not used, the RSC Disable
(RSC_DIS) filed of register Receive Filter Control Register (RFCTL)
should be set according to ixgbe datasheet.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
* Acquire PHY semaphore before device reset
* Add support for 2.5G KX physical layer
* Add MAC X550em/X557 LED on|off support
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch updates ixgbe_led_[on|off]_t_X550em for MAC or PHY connected
LEDs. To support both MAC or PHY connected LEDs, both MAC and PHY led
control registers are configured.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Add another define for the 2.5G KX physical layer. This requires all
variables and support functions that deal with "physical_layer" to be
bumped to u64 as this is the 33rd define.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
A recent firmware change fixed an issue to acquire the PHY semaphore
before accessing PHY registers. This led to a case where SW can issue
a device reset clearing the MDIO registers. This patch makes SW acquire
the PHY semaphore before issuing a device reset.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
To achieve functionality of retrieving only specific statistics
given by application there are two new functions added:
ixgbe_dev_xstats_get_by_ids() which retrieve
values of statistics specified by ids array
and ixgbe_dev_xstats_get_names_by_ids() which retrieve
names of statistics specified by ids array.
Signed-off-by: Jacek Piasecki <jacekx.piasecki@intel.com>
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
DPDK community has several emails discussion on this topic,
these mails link is bellow:
http://dpdk.org/ml/archives/dev/2017-March/060379.html,
http://dpdk.org/ml/archives/dev/2017-March/060295.html,
items like VLAN can already have several valid "types"
(0x88a8, 0x8100, 0x9100), and who knows what will come up
in the future.
And ixgbe_flow just ignores the types when do filter configuration.
So it may be reasonable to delete the related tpid check process.
Also add some more comment log on stack explanation.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Fix generic filter return info is not readable
when repeat to create a rule.
Fixes: 72c135a89f ("net/ixgbe: create consistent filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Create a new file rte_pmd_ixgbe.c for all the private
APIs. Move all the related code to the new file.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Having packets received without any offload flags given in the mbuf is not
very useful, and performance tests with testpmd indicates little
benefit is got with the current code by turning off the flags. This makes
the build-time option pointless, so we can remove it.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
With the mbuf rework, we now have 8 contiguous bytes to be rearmed in the
mbuf just before the 8-bytes of olflags. If we don't do the rearm write
inside the descriptor ring replenishment function, and delay it to
receiving the packet, we can do a single 16B write inside the RX function
to set both the rearm data, and the flags together.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The patch change the prototype of callback function
(rte_intr_callback_fn) by removing the unnecessary parameter.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
To avoid multiple stores on fast path, Ethernet drivers
aggregate the writes to data_off, refcnt, nb_segs and port
to an uint64_t data and write the data in one shot
with uint64_t* at &mbuf->rearm_data address.
Some of the non-IA platforms have store operation overhead
if the store address is not naturally aligned.This patch
fixes the performance issue on those targets.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Now that the m->next pointer and m->nb_segs is expected to be set (to
NULL and 1 respectively) after a mempool_get(), we can avoid to write them
in the Rx functions of drivers.
Only some drivers are patched, it's not an exhaustive patch. It gives
the idea to do the same in other drivers.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Document the function and make it public, since it is used at several
places in the drivers. The old one is marked as deprecated.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Ixgbe supports to set the relative bandwidth for the TCs.
It's a global setting for the PF and all the VFs of a
physical port.
This feature provide the API to set the bandwidth.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
To add a wrapper function to remove the limit of tx burst size and
implement the "make an best effort to transmit the pkts" policy.
The patch makes ixgbe vec function work in a consistent behavior
like ixgbe_xmit_pkts_simple and ixgbe_xmit_pkts do that.
Cc: Helin Zhang <helin.zhang@intel.com>
Cc: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
4 and 8 TCs are supported on ixgbe. By default there're
8 TCs. So when initializing the device, the bandwidth for
8 TCs is set.
When changing the TC number, it's only considered setting
the bandwidth for 4 TCs. If the user change the number
from 4 to 8, the TCs' bandwidth is not right.
Fixes: 0807f80d35 ("ixgbe: DCB / flow control")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Without setting the id, calling xstats_get twice with same array causes
memory corruption.
Also, if IXGBEVF_NB_XSTATS will be different than 1 in the future,
this will cause issues.
Fixes: 156712ba40 ("ixgbevf: add extending stats")
Signed-off-by: Ido Barnea <ibarnea@cisco.com>
All kinds of filter need to hardware mac type check
to make sure the hardware support that type of filter.
If not, it may cause serious issue.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Fixes: 672be56d76 ("net/ixgbe: parse n-tuple filter")
Fixes: eb3539fc85 ("net/ixgbe: parse ethertype filter")
Fixes: 429f6ebb42 ("net/ixgbe: parse TCP SYN filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Move ixgbe 2 mac type check macros to ixgbe_ethdev.h in
order to be used by filter parser functions in file
ixgbe_flow.c.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Delete useless function declarations in file ixgbe_flow.c and
adjust function definition position to avoid compile error.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
In SRIOV case, ETH_MQ_RX_VMDQ_DCB and ETH_MQ_RX_DCB should be considered as
the same meaning, due to the multi-queue mapping is the same SRIOV and VMDq
in ixgbe.
Fixes: 27b609cbd1 ("ethdev: move the multi-queue mode check to specific drivers")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
DCB is split to RX and TX mode. All-queues-drop is set for TX mode.
It's not appropriate because all-queue-drop is a RX feature.
Move this setting from TX to RX.
Fixes: f3f9b17bb8 ("net/ixgbe: support multiqueue mode VMDq DCB with SRIOV")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The function is not defined anywhere, remove it.
Fixes: 0eb609239e ("ixgbe: enable Rx queue interrupts for PF and VF")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
In the IOV scenario, multi Rx queues can be assigned to one VF.
If the dropping is not enabled, when no descriptors are available
for one queue, this queue can block others.
Fixes: 00e30184da ("ixgbe: add PF support")
Cc: stable@dpdk.org
Suggested-by: Liang-Min Larry Wang <liang-min.wang@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
* Add link block check for KR.
* Complete HW initialization even if SFP is not present.
* Add VF xcast promiscuous mode.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Fix ICC build error by removing the EWARN third parameter.
Build error:
.../drivers/net/ixgbe/base/ixgbe_phy.c(1543):
error #268: the format string ends before this argument
EWARN(hw, "WARNING: Intel (R) Network "
^
.../drivers/net/ixgbe/base/ixgbe_phy.c(1805):
error #268: the format string ends before this argument
EWARN(hw, "WARNING: Intel (R) Network "
^
Fixes: aa4fc14d2c ("ixgbe: update base driver")
Fixes: b94a06c1b4 ("ixgbe/base: support qsfp and lco")
Cc: stable@dpdk.org
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add the support of xcast promiscuous mode. It's
added in mailbox v1.3.
Move the definition of xcast mode to base code.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Disable Ethernet Flow Control (FC) for device 15B0.
Make sure that ixgbe_device_supports_autoneg_fc()
returns false and hw->fc.disable_fc_autoneg is set
to true to avoid running the fc_autoneg function
for the device 15B0, as this device doesn't support
this function.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
If SFP module is not present, reset_hw doesn't return success.
SW should complete the initialization, or with specific module
it resulted in no link when the module was later inserted.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add a L3/L4 filtering definition of Multiple Receive Queues Command
(MRQC) register for the future use.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When setting up link on x550 KR devices, should check
if there are constraints on link from manageability, which
may result in link loss.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The check of queue_id is done in all drivers implementing
rte_eth_rx_queue_count(). Factorize this check in the generic function.
Note that the nfp driver was doing the check differently, which could
induce crashes if the queue index was too big.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Use vlan_mask->tci as big endian since this is how rte flow defines it.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Fixes: 37ed39b4e6 ("net/ixgbe: add TCI mask check for flow director")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Vector PMD will check 4 descs in one time, but the statuses are not
consistent because the memory allocated for RX descriptors is cacheable
huagepage.
This patch is to calculate the number of received packets by scann DD bit
sequentially, and stops when meeting the first packet with DD bit unset.
Fixes: b20971b6cc ("net/ixgbe: implement vector driver for ARM")
Cc: stable@dpdk.org
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
To get better performance, Rx bulk alloc recv function will scan 8 descs
in one time, but the statuses are not consistent on ARM platform because
the memory allocated for Rx descriptors is cacheable hugepages.
This patch is to calculate the number of received packets by scan DD bit
sequentially, and stops when meeting the first packet with DD bit unset.
Fixes: 7431041062 ("ixgbe: allow rx bulk alloc")
Cc: stable@dpdk.org
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
dev_flags is wrongly overwritten with RTE_ETH_DEV_DETACHABLE value
in drivers after rte_eth_copy_pci_info().
Previous values of the dev_flags set in rte_eth_copy_pci_info(),
like RTE_ETH_DEV_INTR_LSC, are get lost. That will fail the device
configuration.
Fix by preventing dev_flags overwritten.
Fixes: 22dda618c0 ("pci: separate detaching ethernet ports from PCI devices")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Jeff Guo <jia.guo@intel.com>
For PMD specific API it is required to check if provided port id is for
a supported device.
It's not appropriate to call rte_eth_dev_info_get in PMD, as
rte_eth_dev_info_get need to get info from PMD.
Remove rte_eth_dev_info_get from PMD code and get the info directly.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
VNI of VXLAN is parsed wrongly. The root cause is that
VNI array in VXLAN item also uses network byte ordering.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Add more check on the tci mask of VLAN and VXLAN parser
in fdir filter rule pattern parser. If such check not added,
it maybe cause error in fdir configuration set check.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
