Update ixgbe_setup_phy_link_generic that set/unset auto-negotiation.
Ensure that unsupported auto-negotiation speeds are unset.
This is necessary since the PHY NVM may advertise unsupported speeds.
Fixes: af75078fec ("first public release")
Signed-off-by: Wei Dai <wei.dai@intel.com>
Fix ixgbe_setup_sgmii_m88 to set lane speed to autoneg instead of 1G
to prevent problems with link between PHYs
Fixes: d4b4c68454 ("net/ixgbe/base: add X550em_a FW ALEF support")
Signed-off-by: Wei Dai <wei.dai@intel.com>
Return correct physical layer for some x550 devices.
Fixes: 76d5b807ff ("ixgbe/base: new X557 phy")
Fixes: d2e72774e5 ("ixgbe/base: support X550")
Signed-off-by: Wei Dai <wei.dai@intel.com>
The MAC register NW_MNG_IF_SEL fields have been redefined for X553.
These changes impact the iXFI driver code flow. Since iXFI is only
supported in X552, this patch adds X552 MAC check for iXFI flows.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Enable the Link Alarm Status Interrupt (LASI) only for X552 devices
to receive notifications of the link configurations of the external
PHY and correspondingly support the configuration of the internal
iXFI link, since iXFI does not support auto-negotiation.
This is not required for X553 devices having KR support, which
performs auto-negotiations and which is used as the internal
link to the external PHY.
Signed-off-by: Wei Dai <wei.dai@intel.com>
The variable checksum_last_word is used only for bounds check.
So remove this variable and use IXGBE_EEPROM_CHECKSUM directly.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Add support to get the link active LED index via the LEDCTL register.
If the LEDCTL register does not have link active LED set then
use MAC default LED index.
Link active LED is used for adapter identify/blink support.
Signed-off-by: Wei Dai <wei.dai@intel.com>
This patch cleans up the code and clarifies the comment around
the X557 PHY link status check in ixgbe_check_link_t_x550em().
Signed-off-by: Wei Dai <wei.dai@intel.com>
Method to identify the CS4223/CS4227 is incorrect and unreliable.
Provide a new register to differentiate between these PHY SKUs.
Fixes: fc0559bdb5 ("net/ixgbe/base: add link MAC setup for X550a SFP+")
Signed-off-by: Wei Dai <wei.dai@intel.com>
Devices that cannot go 10G speeds can safely select a faster
Management Data Input/Output (MDIO) speed.
Select fast MDIO clock speed for for those devices.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Receive Address Register (RAR) entries, including SAN MAC address,
are cleared when VMDq pool bits are cleared.
Prevent SAN MAC address to be cleared.
Fixes: af75078fec ("first public release")
Signed-off-by: Wei Dai <wei.dai@intel.com>
PHY type ixgbe_phy_x550em_ext_t requires different check
to verify reset status.
Fixes: af75078fec ("first public release")
Signed-off-by: Wei Dai <wei.dai@intel.com>
remove the following static functions:
ixgbe_set_pool_rx_mode
ixgbe_set_pool_rx
ixgbe_set_pool_tx
ixgbe_set_pool_vlan_filter
ixgbe_set_vf_rate_limit
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Move the following functions from eth_dev_ops to the ixgbe PMD and rename:
ixgbe_set_pool_rx_mode
ixgbe_set_pool_rx
ixgbe_set_pool_tx
ixgbe_set_pool_vlan_filter
ixgbe_set_vf_rate_limit
Rename the functions to the following:
rte_pmd_ixgbe_set_vf_rxmode
rte_pmd_ixgbe_set_vf_rx
rte_pmd_ixgbe_set_vf_tx
rte_pmd_ixgbe_set_vf_vlan_filter
rte_pmd_ixgbe_set_vf_rate_limit
Use public function internally
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
MACsec (or LinkSec, 802.1AE) is a MAC level encryption/authentication
scheme defined in IEEE 802.1AE that uses symmetric cryptography.
This commit adds the MACsec offload support for ixgbe.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Attaching and detaching ethernet ports from an application
is not the same thing as physically removing a PCI device,
so clarify the flags indicating support. All PCI devices
are assumed to be physically removable, so no flag is
necessary in the PCI layer.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
The function rte_eth_xstats_get() return an array of tuples (id,
value). The value is the statistic counter, while the id references a
name in the array returned by rte_eth_xstats_get_name().
Today, each 'id' returned by rte_eth_xstats_get() is equal to the index
in the returned array, making this value useless. It also prevents a
driver from having different indexes for names and value, like in the
example below:
rte_eth_xstats_get_name() returns:
0: "rx0_stat"
1: "rx1_stat"
2: ...
7: "rx7_stat"
8: "tx0_stat"
9: "tx1_stat"
...
15: "tx7_stat"
rte_eth_xstats_get() returns:
0: id=0, val=<stat> ("rx0_stat")
1: id=1, val=<stat> ("rx1_stat")
2: id=8, val=<stat> ("tx0_stat")
3: id=9, val=<stat> ("tx1_stat")
This patch fixes the drivers to set the 'id' in their ethdev->xstats_get()
(except e1000 which was already doing it), and fixes ethdev by not setting
the 'id' field to the index of the table for pmd-specific stats: instead,
they should just be shifted by the max number of generic statistics.
Fixes: bd6aa172cf ("ethdev: fetch extended statistics with integer ids")
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
This makes struct rte_eth_dev independent of struct rte_pci_device by
replacing it with a pointer to the generic struct rte_device.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Only the drivers itself can decide if it could fill PCI information fields
of dev_info.
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Since later changes will change where PCI information is,
localize mapping in one macro.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jan Blunck <jblunck@infradead.org>
Add a new macro RTE_PMD_REGISTER_KMOD_DEP() that allows a driver to
declare the list of kernel modules required to run properly.
Today, most PCI drivers require uio/vfio.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The links never coming up when bring up x552 NIC, device id is 15ac.
This is caused by delete some code which casing
removes X550em SFP iXFI setup for the drivers in function
ixgbe_setup_mac_link_sfp_x550em().
Fix method is recover the deleted code.
Fixes: 1726b9cd9c ("net/ixgbe/base: remove X550em SFP iXFI setup")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Some VF registers are using PF's name or address by mistake.
Although some of them are sharing the same addresses.
Fixes: 0198848a47 ("ixgbe: add access to specific device info")
Reported-by: Xuekun Hu <xuekun.hu@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Allow Data Center Bridge (DCB) configuration when SRIOV is enabled.
Signed-off-by: Rahul R Shah <rahul.r.shah@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The final parameter to rte_pmd_ixgbe_set_vf_vlan_insert is uint8_t
and treated as a binary flag when it needs to be a uint16_t
and treated as a VLAN id. The data sheet (sect 8.2.3.27.13) describes
the right most 16 bits as the VLAN id that is to be inserted; the
16.11 code is accepting only a 1 or 0 thus effectively only
allowing the VLAN id 1 to be inserted (0 disables the insertion
setting).
This patch changes the final parm name to represent the data that
is being accepted (vlan_id), changes the type to permit all valid
VLAN ids, and validates the parameter based on the range of 0 to
4095. Corresponding changes to prototype and documentation in the
.h file.
Fixes: 49e248223e ("net/ixgbe: add API for VF management")
Signed-off-by: E. Scott Daniels <daniels@research.att.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In vPMD, when we load Rx desc with _mm_loadu_si128, the volatile
modifier will be cast away, allowing the compiler to reorder the
load instructions.
The Rx recv function's correctness is relying on these load
instructions following a strict sequence, reading the descriptors
in reverse order, so we add compiler barrier to prevent compiler
reorder.
Fixes: c95584dc2b ("ixgbe: new vectorized functions for Rx/Tx")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
In mac-vlan mode, MAC address mask is not supported by HW.
The MAC address mask should not be set in mac-vlan mode.
Instead, only set it in tunnel mode.
Fixes: 82fb702077 ("ixgbe: support new flow director modes for X550")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
call _rte_eth_dev_callback_process from ixgbe_rcv_msg_from_vf function.
The callback asks the user application if it is allowed to perform
the function.
If the cb_param.retval is RTE_PMD_IXGBE_MB_EVENT_PROCEED then continue,
if 0, do nothing and send ACK to VF
if > 1, do nothing and send NAK to VF.
Signed-off-by: Alex Zelezniak <alexz@att.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
add cb_arg parameter to the _rte_eth_dev_callback_process function.
Adding a parameter to this function allows passing information
to the application when an eth device event occurs such as
a VF to PF message.
This allows the application to decide if a particular function
is permitted.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Alex Zelezniak <alexz@att.com>
All macros related to driver registeration renamed from DRIVER_*
to RTE_PMD_*
This includes:
DRIVER_REGISTER_PCI -> RTE_PMD_REGISTER_PCI
DRIVER_REGISTER_PCI_TABLE -> RTE_PMD_REGISTER_PCI_TABLE
DRIVER_REGISTER_VDEV -> RTE_PMD_REGISTER_VDEV
DRIVER_REGISTER_PARAM_STRING -> RTE_PMD_REGISTER_PARAM_STRING
DRIVER_EXPORT_* -> RTE_PMD_EXPORT_*
Fix PMDINFOGEN tool to look for matches of RTE_PMD_REGISTER_*.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add CKSUM_GOOD flag to distinguish a good checksum from an unknown one.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
The ixgbe base driver was updated to version
cid-10g-shared-code.2016.04.12.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Change the parameter bypass_vlvf to vlvf_bypass for consistency
with ixgbe_common.c.
Clean up some whitespace and misalignment.
Change variable type of secrxreg from int to u32 as it's used
to store register value.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
By exiting early we could skip the PHY configuration and as such
the driver may not configure the PHY correctly for SFP+.
This patch removes the logic which would previously skip the PHY
configuration in the case where we are already at the requested
speed in ixgbe_setup_mac_link_multispeed_fiber().
Fixes: f3430431ab ("ixgbe/base: add SFP+ dual-speed support")
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Support for flow control auto negotiation is defeatured from X550em_a
fiber when connected to speeds lower than 10Gbps. This patch cleans up
the code path which is mostly dead to begin with.
- add device IDs check in ixgbe_device_supports_autoneg_fc().
- ixgbe_fc_autoneg_fiber_x550em_a() is now used only to pass the user
settings to ixgbe_fc_enable_generic().
- make sure that start_hw does not fail when setup_fc is not implemented.
- small fix in the debug message when ixgbe_device_supports_autoneg_fc()
returns false.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Correct link flow for X550em_a backplane with ALEF.
Report the correct link capabilities:
SKUs configured for 2.5G only support 2.5G.
non-10G SKUs can only support 2.5 or 1G.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Currently, not all shadow RAM accesses are being done under the
protection of a semaphore, which could result in corruption.
Refactor the code so that it is possible to hold the semaphore
around ixgbe_host_interface_command by introducing an unlocked form.
This patch also eliminates the function ixgbe_read_ee_hostif_data_X550
in favor of the function ixgbe_read_ee_hostif_X550.
The new arrangement is able to get both the management interface semaphore
and the EEPROM semaphore at the same time instead of separately.
Fixes: af75078fec ("first public release")
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds negotiate_api_version and set_rlpml into mac_ops. With the
introduction of Hyper-V functionality, we can have separate functions to
accommodate different implementations without have one break the other.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds X550em_a FW ALEF support. ALEF is the new unified FW.
The driver uses the KRM_PMD_RX_FLEX_PORT/FLX_MASK_ST20 registers to
configure the lane mode.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch moves PHY ops pointers initialization to
ixgbe_init_phy_ops_X550em and PHY identifying/initializing
to ixgbe_identify_phy_x550em.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch changes the value of IXGBE_LINK_SPEED_10_FULL from 4 to 2,
as 4 is reserved to 100Mbit Half Duplex in E1000 shared code.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Make sure ixgbe_device_supports_autoneg_fc() returns true for the device
IDs of X550EM_A_1G_T and X550EM_A_1G_T_L.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch reduces the SWFW semaphore/PHY Token retry delay.
ixgbe_release_swfw_sync_X540: Reduce 5 ms delay after releasing
semaphore to 2 ms. HW team indicated 1 ms delay would be sufficient
for FW access.
ixgbe_acquire_swfw_sync_X540: Remove 5 ms delay after acquiring
semaphore.
ixgbe_acquire_swfw_sync_X550a: Remove 5 ms delay since there are
two 2 ms delays in the semaphore release flow.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
ixgbevf_write_msg_read_ack() is now performing mailbox write and read,
so this patch use this function to commonize mailbox write and read.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds missing FDIRSCTPM mask setting for tunneled packets.
It should be set the same way as FDIRTCPM and FDIRUDPM so that SCTP
packets can be filtered correctly.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch avoids the situation where we initialize an adapter but have not
yet set up phy.autoneg_advertised speeds. In that case we could end
up with having no autoneg speeds enabled and therefore get no link until we
reset the link and set the autoneg speeds correctly.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch removes the X550em_a specific check link function and uses
ixgbe_check_mac_link_generic instead. It is not necessary to
check both the MAC link register and external PHY registers when
checking the link.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Do parameter check to prevent exceptional value being written into
register.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
X550em_a adds GENEVE support by using the upper 16 bits of VXLANCTRL
to store the UDP port (VXLANCTRL.GENEVE_UDP_PORT).
This patch adds definitions that can be used to manipulate the ports
depending on which protocol is being configured.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Create flow control (FC) setup and enable functions to configure PHY
registers. These registers advertise FC settings according to the user
requested mode. On link establishment, these settings are negotiated
with the link partner to agree on the settings to use: RX and TX enabled,
TX only enabled, or FC disabled and RX enabled (which also enables TX).
Remove the part of code that performs FC auto-negotiation (AN) in
ixgbe_setup_m88 and put it in a new function to maintain consistency
with other FC AN implementations so far. Add function pointers to the
setup-fc and enable-fc functions so that they get called during init
to perform FC AN.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When HW starts, first read the NVM to see if the crosstalk fix should
be used on the given HW and cache that information in the HW structure.
When we check_link we first see if 1) NVM requests this fix 2) if
we are an SFP+ device 3) see if a module is not in the SFP+ cage.
If all the above are true then don't bother checking the link, just
say it is down.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Previously we checked return buffer for
(IXGBE_VF_SET_MACVLAN | IXGBE_VT_MSGTYPE_NACK), but this would not
work if index is not 0 and as a result NACK will not be detected.
Fixes: af75078fec ("first public release")
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch makes sure that we access IOSF registers through the
host interface command (HIC) for the majority of X550em devices.
All devices with NVM are capable of using the HIC.
For consistency all instances where the ixgbe_write_phy_reg_mdi is called
directly are converted to function pointer calls.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch will pave the way for the new VF unicast promiscuous
mode support.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Propagate return value when trying to set the maximum packet length. A
PF driver could return a NACK for this request, and the VF driver will
need to know this.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Some function comments are obviously wrong, this patch rewords them.
Fixes: d2e72774e5 ("ixgbe/base: support X550")
Fixes: 0790adeb56 ("ixgbe/base: support X550em_a device")
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Provide a DMA coalescing configuration for 10Mb link speed.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The error exit should at least try to set the page register to 0
since other code will assume that state.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds a separate function for enabling Flow Control (FC)
auto-negotiation on X550em_a:
- rename ixgbe_fc_autoneg_x550a() to ixgbe_fc_autoneg_backplane_x550em_a().
- create ixgbe_fc_autoneg_fiber_x550em_a() specifically for fiber.
- add definitions for KRM_PCS_KX_AN_LP register and related bits.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds a separate function for setting up Flow Control (FC)
on X550em_a fiber:
- rename ixgbe_setup_fc_x550a() to ixgbe_setup_fc_backplane_x550em_a().
- create ixgbe_setup_fc_fiber_x550em_a() to configure FC for fiber.
- add definitions for KRM_AN_CNTL_4 and KRM_PCS_KX_AN along with related
definitions.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add new definitions to support VF unicast promiscuous mode which
will be implemented in a later patch.
Besides, rename definitions of subdevice IDs on SFP LOM to make it
easier to distinguish.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Fully initialize X550em_a 1G PHYs; move the PHY definitions from
ixgbe_x550.h to ixgbe_phy.h, where they really belong; define
register numbers in decimal because that is how they are in the spec.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Move the PHY probe code into a separate function so that it can be
reused. A subsequent patch will use it for configurations that
provide the PHY address explicitly.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch introduces new init_ops functions for X550EM_a and X550EM_x.
This makes it easier to assign function pointers with specific
dependencies (like media type) for each MAC.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds update_xcast_mode callback in mac ops, and moves
ixgbevf_update_xcast_mode function into base code.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch uses the shared Management Data Input/output (MDIO)
functions ixgbe_read_phy_reg_x550a and ixgbe_write_phy_reg_x550a
for X550em_a 10G PHY which supports flow control auto-negotiation.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The x550a related firmware reverses the endianness of the PHY data read
and written via host interface command, so make corresponding changes
to that.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch removes X550em SFP iXFI setup for the drivers since there
is no released hardware production with SFP iXFI.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The vfta_delta value rather than the pointer should be checked.
Fixes: b978f7b38c ("net/ixgbe/base: simplify VLAN management")
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In SR-IOV configuration, queues 0 - nb_rx_queues belong to VF0,
which means that with the current implementation when a reset mbox
message comes from any VF, it affects the settings of VF0.
Fix this by using PF queue index to update the correct queue.
Fixes: dbb0b8737f ("ixgbe: add vlan offload support")
Signed-off-by: Alex Zelezniak <alexz@att.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Starting rxtx before flow director config will cause driver not to
receive packets from NIC.
Signed-off-by: Wang Wei <lnykww@gmail.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
For the vector PMD, release all mbufs from the Rx queue if no packets
are received after device start.
Fixes: 11b220c649 ("ixgbe: fix release queue mbufs")
Signed-off-by: Yury Kylulin <yury.kylulin@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Interestingly, clang and gcc has different prototype for _mm_prefetch().
For gcc, we have
_mm_prefetch (const void *__P, enum _mm_hint __I)
While for clang, it's
#define _mm_prefetch(a, sel) (__builtin_prefetch((void *)(a), 0, (sel)))
That's how the following error comes with clang:
error: cast from 'const void *' to 'void *' drops const qualifier
[-Werror,-Wcast-qual]
_mm_prefetch((const void *)rused, _MM_HINT_T0);
/usr/lib/llvm-3.8/bin/../lib/clang/3.8.0/include/xmmintrin.h:684:58:
note: expanded from macro '_mm_prefetch'
#define _mm_prefetch(a, sel) (__builtin_prefetch((void *)(a),
0, (sel)))
What's weird is that the build was actaully Okay before. I met it while
apply Jerin's vector support for ARM patch set: he just move this piece
of code to another file, nothing else changed.
This patch fix the issue when Jerin's patchset is applied. Thus, I think
it's still needed.
Similarly, make the same change to other _mm_prefetch users, just in case
this weird issue shows up again somehow later.
Fixes: fc3d66212f ("virtio: add vector Rx")
Fixes: c95584dc2b ("ixgbe: new vectorized functions for Rx/Tx")
Fixes: 9ed94e5bb0 ("i40e: add vector Rx")
Fixes: 7092be8437 ("fm10k: add vector Rx")
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Remove the 'name' member from rte_pci_driver and move to generic
rte_driver.
Most of the PMD drivers were initially using DRIVER_REGISTER_PCI(<name>..)
as well as assigning a name to eth_driver.pci_drv.name member.
In this patch, only the original DRIVER_REGISTER_PCI(<name>..) name has
been populated into the rte_driver.name member - assignments through
eth_driver has been removed.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
[Shreyansh: Rebase and expand changes to newly added files]
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Simplify crypto and ethdev pci drivers init by using newly introduced
init macros and helpers.
Those drivers then don't need to register as "rte_driver"s anymore.
Exceptions:
- virtio and mlx* use RTE_INIT directly as they have custom initialization
steps.
- VDEV devices are not modified - they continue to use PMD_REGISTER_DRIVER.
Update documentation for replacing an example referring to
PMD_REGISTER_DRIVER.
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
As discussed in the past release, driver names are modified
to be more consistent, and the future driver should follow
this new convention.
Driver names consist of:
"driver category"_"driver folder name"_"optional extra name".
For example:
- Crypto null driver -> "crypto_null"
- Network IXGBE VF driver -> "net_ixgbe_vf"
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
PCI device ids moved from common header into ixgbe driver itself.
KNI starts using pci_device_id from kni/ethtool/ixgbe driver, this is
only for KNI ethtool support, KNI data path is not affected.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
The ixgbe driver does not compile if CONFIG_RTE_IXGBE_RX_OLFLAGS_ENABLE=n
because the macro has not the proper number of parameters. To reproduce
the issue:
make config T=x86_64-native-linuxapp-gcc
sed -i 's,\(IXGBE_RX_OLFLAGS_ENABLE\)=y,\1=n,' build/.config
make -j4
[...]
ixgbe_rxtx_vec_sse.c: In function ‘_recv_raw_pkts_vec’:
ixgbe_rxtx_vec_sse.c:345:53: error:
macro "desc_to_olflags_v" passed 3 arguments, but takes just 2
desc_to_olflags_v(descs, vlan_flags, &rx_pkts[pos]);
^
ixgbe_rxtx_vec_sse.c:345:3: error:
‘desc_to_olflags_v’ undeclared (first use in this function)
desc_to_olflags_v(descs, vlan_flags, &rx_pkts[pos]);
^
ixgbe_rxtx_vec_sse.c:231:10: error:
variable ‘vlan_flags’ set but not used
uint8_t vlan_flags;
^
This patch fixes the number of arguments in the macro, and ensures that
vlan_flags is marked as used to avoid the third error.
Fixes: b37b528d95 ("mbuf: add new Rx flags for stripped VLAN")
Reported-by: Amin Tootoonchian <amint@icsi.berkeley.edu>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The ethtool app was allocating too little space for 64-bit
registers which resulted in memory corruption.
Removes hard-coded assumption that device registers
are always 32 bits wide. The rte_eth_dev_get_reg_length
and rte_eth_dev_get_reg_info callbacks did not
provide register size to the app in any way while is
needed to allocate correct number of bytes before
retrieving registers using rte_eth_dev_get_reg.
This commit changes rte_eth_dev_get_reg_info so that
it can be used to retrieve both the number of registers
and their width, and removes the now-redundant
rte_eth_dev_get_reg_length.
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Modify the PMD_REGISTER_DRIVER macro, adding a name argument to it. The
addition of a name argument creates a token that can be used for subsequent
macros in the creation of unique symbol names to export additional bits of
information for use by the pmdinfogen tool. For example:
PMD_REGISTER_DRIVER(ena_driver, ena);
registers the ena_driver struct as it always did, and creates a symbol
const char this_pmd_name0[] __attribute__((used)) = "ena";
which pmdinfogen can search for and extract. The subsequent macro
DRIVER_REGISTER_PCI_TABLE(ena, ena_pci_id_map);
creates a symbol const char ena_pci_tbl_export[] __attribute__((used)) =
"ena_pci_id_map";
Which allows pmdinfogen to find the pci table of this driver
Using this pattern, we can export arbitrary bits of information.
pmdinfo uses this information to extract hardware support from an object
file and create a json string to make hardware support info discoverable
later.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Remy Horton <remy.horton@intel.com>
For all drivers that currently implement xstats, the id field in the
rte_eth_stats_name structure equals the entry's array index. This
patch eliminates the redundant id field as a direct index lookup is
faster than a search for the matching id field.
Suggested-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
The "end" variable is assigned and then two lines later is assigned a
different value, making the first assignment useless. Remove it.
Coverity issue: 13335
Fixes: cf4b4708a8 ("ixgbe: improve slow-path perf with vector scattered Rx")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The ixgbe base driver was updated to version
cid-10g-shared-code.2016.04.12
The changes include:
Added sgmii link for X550.
Added mac link setup for X550a SFP and SFP+.
Added KR support for X550em_a.
Added new phy definitions for M88E1500.
Added support for the VLVF to be bypassed when adding/removing
a VFTA entry.
Added X550a flow control auto negotiation support.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
A work around for a new crosstalk erratum that causes link flap in
entry cages has been introduced. So this patch defines the bit in
NVM that will tell software if this work around is needed.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
This patch adds X550a flow control auto negotiation support.
ixgbe_setup_fc_x550a and ixgbe_fc_autoneg_X550a functions are
added to setup and enable flow control. MAC ops function pointer
fc_autoneg was added so that hardware specific fc autoneg functions
can be called from ixgbe_fc_enable_generic.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Make ixgbe_set_mac_anti_spoofing() consistent with the other
functions that deal with setting VLAN and Ethertype spoofing by
changing the prototype to accept a VF parameter.
Also change the logic for writing the PFVFSPOOF register to be similar
to the MAC and Ethertype functions.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Since PCIe standard defines maximum of 8 functions per device lan_id
is a value 0..7. Because of that, lan_id don't need to be u16.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
This patch changes static keyword to STATIC definition, which can be
redefined depending on the compiler used.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
This patch adds support for the VLAN pool filter (VLVF) to be
bypassed when adding or removing a VLAN filter table array (VFTA) entry.
The PF can utilize the default pool while preserving the VLVF for the
VFs use.
Meanwhile, update the VF operations and drivers where corresponding
functionality is invoked.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
This patch simplifies the adding and removing VLANs from
VFTA/VLVF/VLVFB registers. The logic to determine the registers to use
has been simplified to (vid / 32) and (1 - vid / 32). Many conditional
paths and checks are no longer needed with this patch.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
This patch limits getting and putting the PHY Token to PHY MDIO
access only by adding ixgbe_read_phy_reg_x550a and
ixgbe_write_phy_reg_x550a. The PHY Token is only needed to
synchronize access to the MDIO shared between the two MAC instance.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
This patch corrects the FLA/GSCL/GSCN access offset values according
to the datasheet.
Fixes: 0790adeb56 ("ixgbe/base: support X550em_a device")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
This patch fixes a possible race issue between ports, when issuing host
interface commands, by acquiring/releasing the management host interface
semaphore in ixgbe_host_interface_command.
Fixes: 36f43e8679 ("ixgbe/base: refactor manageability block communication")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
For X540 onwards it is possible if a system reset occurs at the
right time to leave the SWFW semaphore high. This new function will
attempt to grab and release the semaphore. If the grab times out it
will still release the semaphore placing it in a known good state.
The idea is to call this when you know no one should be holding the
semaphore (i.e. probe time)
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
There are two device IDs changed from 15C6/15C7 to 15E4/15E5 because of
PHY info changes. 15C6/15C7 IDs are now used for the backplane
SGMII versions.
Also, clean up some discovery kludges from the previous shared ID,
and also add 15C6/15C7 to ixgbe_set_mdio_speed just for paranoia
to control MDIO speed even though nothing should be attached.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
NW_MNG_IF_SEL register is a PHY link configuration register.
Add ixgbe_read_mng_if_sel_x550em to read NW_MNG_IF_SEL, validate
register values and save fields such as PHY MDIO address. This
centralises the reading and checking of the register in one place
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
The ixgbe_vf.h file did not use _<FILENAME>_ and instead used
__<FILENAME>__ which is not the standard used in every other file.
Fixes: af75078fec ("first public release")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
When there is an error getting the PHY token, the error path
fails to release the locks that it has taken. Release those
locks in that failure case.
Fixes: 86b8fb293f ("ixgbe/base: add sw-firmware sync for resource sharing on X550em_a")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
This patch renames IXGBE_PVFTTDLEN to IXGBE_PVFTDLEN according to
abbreviation of Transmit Descriptor Length in datasheet.
Fixes: d2e72774e5 ("ixgbe/base: support X550")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
This patch adds clearing the pool mappings when configuring default
MAC addresses for the interface. Without this there will be the risk
of leaking an address into pool 0 which really belongs to VF 0 when
SR-IOV is enabled.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
This patch updates ixgbe_setup_mac_link_sfp_x550a for X550 SFP+.
ixgbe_set_lan_id_multi_port_pcie has been updated to set the MAC
instance(0/1) which is needed when configuring the external PHY,
since X550a has two instances of MGPK. The MAC instance is read
from the EEPROM.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Use the method pointers instead of direct function calls for IOSF
access so that the right functions can be called on X550EM_a,
compared to other devices using the driver.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Break ixgbe_setup_eee_X550 down to better handle a change from if
statements to switch statements needed to add X550em_a KR support.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
When software sends commands to firmware using the host
slave command interface, firmware fails to receive the
command due to a checksum failed error, as the checksum is
not being correctly set by the driver software.
This patch sets command checksum to the default value of
0xFF, as per the datasheet, therefore the checksum won't
be checked by firmware.
Fixes: 86b8fb293f ("ixgbe/base: add sw-firmware sync for resource sharing on X550em_a")
Fixes: 0790adeb56 ("ixgbe/base: support X550em_a device")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
An error code indicating that the PF rejects the MAC address change
should be returned, in case that the PF has already assigned a MAC
for the VF.
Fixes: af75078fec ("first public release")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
This patch adds new phy type and media type to support
SGMII link for X550, and add ixgbe_setup_sgmii to support
SGMII link setup.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
This patch adds two new VF requests of IXGBE_VF_GET_RETA and
IXGBE_VF_GET_RSS_KEY to the mailbox API.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Previously, a single VLAN header is treated as inner VLAN,
but generally, a single VLAN header is treated as the outer
VLAN header.
The patch fixes the ether type of a single VLAN type, and
enables configuring inner and outer TPID for double VLAN.
Fixes: 19b16e2f64 ("ethdev: add vlan type when setting ether type")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
made second cache line access behavior same as IA
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Reviewed-by: Jianbo Liu <jianbo.liu@linaro.org>
ixgbe PMD RX function(s) misses some packet types that are:
- correctly recognised by the underlying HW.
- marked as supported by ixgbe_dev_supported_ptypes_get().
Fixes: 9586ebd358 ("ixgbe: replace some offload flags with packet type")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Tested-by: Olivier Matz <olivier.matz@6wind.com>
When using kernel PF and DPDK VF, when the PF driver finds the link
state changes, up -> down or down -> up, the driver will send a
message to VF by mailbox. This link state change may be
triggered by PHY disconnection/reconnection, user config change
like *ifconfig down/up* or interface parameter, like MTU change.
This patch enables the support of the mailbox interrupt,
so VF driver can receive the message for link up/down.
After VF receives this message, VF port need to be reset to
recover. This needs to be handled by the application so this patch
allows the app to register a reset callback so it can reset the VF port.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
To be consistent with the naming for ARM NEON implementation,
ixgbe_rxtx_vec.c is renamed to ixgbe_rxtx_vec_sse.c.
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Use ARM NEON intrinsic to implement ixgbe vPMD
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
[style fixes as highlighted by checkpatch.pl]
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
move scalar code which does not use x86 intrinsic functions to new file
"ixgbe_rxtx_vec_common.h", while keeping x86 code in ixgbe_rxtx_vec.c.
This allows the scalar code to to be shared among vector drivers for
different platforms.
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Jianbo Liu <jianbo.liu@linaro.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The current extended ethernet statistics fetching involve doing several
string operations, which causes performance issues if there are lots of
statistics and/or network interfaces. This patch changes the test-pmd
and proc_info applications to use the new xstats API, and removes
deprecated code associated with the old API.
Signed-off-by: Remy Horton <remy.horton@intel.com>
The current extended ethernet statistics fetching involve doing several
string operations, which causes performance issues if there are lots of
statistics and/or network interfaces. This patch changes the ixgbe driver
to use the new API that seperates name string and value queries.
Signed-off-by: Remy Horton <remy.horton@intel.com>
The behavior of PKT_RX_VLAN_PKT was not very well defined, resulting in
PMDs not advertising the same flags in similar conditions.
Following discussion in [1], introduce 2 new flags PKT_RX_VLAN_STRIPPED
and PKT_RX_QINQ_STRIPPED that are better defined:
PKT_RX_VLAN_STRIPPED: a vlan has been stripped by the hardware and its
tci is saved in mbuf->vlan_tci. This can only happen if vlan stripping
is enabled in the RX configuration of the PMD.
For now, the old flag PKT_RX_VLAN_PKT is kept but marked as deprecated.
It should be removed from applications and PMDs in a future revision.
This patch also updates the drivers. For PKT_RX_VLAN_PKT:
- e1000, enic, i40e, mlx5, nfp, vmxnet3: done, PKT_RX_VLAN_PKT already
had the same meaning than PKT_RX_VLAN_STRIPPED, minor update is
required.
- fm10k: done, PKT_RX_VLAN_PKT already had the same meaning than
PKT_RX_VLAN_STRIPPED, and vlan stripping is always enabled on fm10k.
- ixgbe: modification done (vector and normal), the old flag was set
when a vlan was recognized, even if vlan stripping was disabled.
- the other drivers do not support vlan stripping.
For PKT_RX_QINQ_PKT, it was only supported on i40e, and the behavior was
already correct, so we can reuse the same bit value for
PKT_RX_QINQ_STRIPPED.
[1] http://dpdk.org/ml/archives/dev/2016-April/037837.html,
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Removed comparison against $CC in Makefiles as
in cross-compiling mode CC can be a different string
instead of string "gcc"
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Some architectures (ex: Power8) have a cache line size of 128 bytes,
so the drivers should not expect that prefetching the second part of
the mbuf with rte_prefetch0(&m->cacheline1) is valid.
This commit add helpers that can be used by drivers to prefetch the
rx or tx part of the mbuf, whatever the cache line size.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Many drivers provide their own implementation of rte_mbuf_raw_alloc(),
duplicating the code. Introduce a new public function in rte_mbuf to
allocate a raw mbuf (uninitialized).
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Fix issue reported by Coverity.
Coverity ID 13193: Bad bit shift operation (BAD_SHIFT)
large_shift: In expression 1 << pool, left shifting by more than 31 bits
has undefined behavior. The shift amount, pool, is at least 32.
This patch is a rework of register addr selection logic and mask
computation to made it more readable and avoid bit overflow when 32 bit
value is shifted over its size for pool > 31.
Fixes: fe3a45fd41 ("ixgbe: add VMDq support")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The masking for the RX/TX enable bit was incorrect in the rx and tx
queue stop functions. Instead of using "& MASK" it used "| MASK" which
would always return true. This error was found by converity scan.
CID 13215 : Wrong operator used (CONSTANT_EXPRESSION_RESULT)
operator_confusion: txdctl | 33554432 is always 1/true regardless of the
values of its operand. This occurs as the logical second operand of
'&&'.
CID 13216 : Wrong operator used (CONSTANT_EXPRESSION_RESULT)
operator_confusion: rxdctl | 33554432 is always 1/true regardless of the
values of its operand. This occurs as the logical second operand of
'&&'.
Coverity issue: 13215
Coverity issue: 13216
Fixes: 029fd06d40 ("ixgbe: queue start and stop")
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Run ixgbe driver through checkpatch and fix the issues highlighted
Fix line spacing, some bad indentation, and in a couple
of cases use short circuit (already there) return to lessen indentation.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Applied with four additional fixes for issues highlighted by checkpatch
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Some statistics were deprecated since release 2.1 (49f386542a).
The last deprecated counter to be used was imcasts.
The VF loopback statistics are also removed as they are used only
in igb and duplicated in extended statistics.
The new counters should be added to extended statistics.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
VxLAN & NVGRE are supported by x550. As we know HW can parse
the packet and tell SW the type info. For VxLAN & NVGRE packets
there's some change. HW will not tell SW the info of the outer
header but the inner header instead. But we always take the
info as it's for the outer header. So the packet type info is
not right when x550 receives VxLAN & NVGRE packets.
As x550 only supports IPv4 VxLAN & NVGRE packets, we can tell
the outer header of VxLAN is IPv4 + UDP, and the outer header
of NVGRE is IPv4 only. What we don't know is if there's
optional field in the outer IPv4 header.
This patch implement the support of packet type for VxLAN &
NVGRE. And it fixes the wrong packet type issue either.
BTW:
It doesn't fix any existing commit as although it resolve an
issue it's more like a new feature but not a fix.
Reported-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch redesigns the API to set the link speed/s configuration
of an ethernet port. Specifically:
- it allows to define a set of advertised speeds for
auto-negociation.
- it allows to disable link auto-negociation (single fixed speed).
- default: auto-negociate all supported speeds.
A flag autoneg in struct rte_eth_link indicates if link speed was a
result of auto-negociation or was fixed by configuration.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The speed capabilities of a device can be retrieved with
rte_eth_dev_info_get().
The new field speed_capa is initialized in the drivers without
taking care of device characteristics in this patch.
When the capabilities of a driver are accurate, the table in
overview.rst must be filled.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
The speed numbers ETH_LINK_SPEED_ are renamed ETH_SPEED_NUM_.
The prefix ETH_LINK_SPEED_ is kept for AUTONEG and will be used
for bit flags in next patch.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Some duplex values are replaced from 0 to half-duplex when link is down.
Some drivers are still using their own constants for duplex modes.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Define and use ETH_LINK_UP and ETH_LINK_DOWN where appropriate.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Silence a compiler warning that this variable may be used uninitialized.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tell the compiler to use an unsigned constant for the config shifts.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Acked-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
