According to recvmsg() specification, 0 is a valid
return code when client is disconnecting.
Therefore, it should not be reported as error, unless there
are other dependencies that require message to not be empty.
But there are none, since the next immediate caller of recvmsg()
reports "vhost peer closed" info (not error) when message is empty.
This patch changes return code check for recvmsg() so that
misleading error message is not printed when the code is 0.
Fixes: 8f972312b8 ("vhost: support vhost-user")
Cc: stable@dpdk.org
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
The vhost_user_read_cb() and rte_vhost_driver_unregister()
can be called at the same time by 2 threads. Eg thread1
calls vhost_user_read_cb() and removes the vsocket from
conn_list, then thread2 calls rte_vhost_driver_unregister()
and frees the vsocket since it is NOT in the conn_list.
So thread1 will access invalid memory when trying to
reconnect.
The fix is to move the "removing of vsocket from conn_list"
to end of the vhost_user_read_cb(), then avoid the race
condition.
The core trace is:
Program terminated with signal 11, Segmentation fault.
Fixes: af14759181 ("vhost: introduce API to start a specific driver")
Cc: stable@dpdk.org
Signed-off-by: Zhike Wang <wangzhike@jd.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Previous patch changed the format of struct
mlx5_flow_dv_modify_hdr_resource, to use a flexible array for
modification actions.
In __flow_dv_translate() a union was defined with item of this struct,
and an array of maximal possible size.
Array elements are filled in several functions.
In function flow_dv_convert_action_set_reg(), array element is filled
partially, while the other fields of this array element are left
uninitialized.
This may cause failure of flow_dv_modify_hdr_resource_register()
when calling driver function with the 'dirty' array.
This patch updates flow_dv_convert_action_set_reg(), setting the
selected array element fields while clearing the other fields.
Other functions that fill the same array elements are also updated
for clarity and proofing future use.
Fixes: 024e95759c ("net/mlx5: fix modify actions support limitation")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The mpx5 PMD maintains the list of devices for those the memory
operation callback routines must be invoked to keep the device MRs (MR
is the entity backing the hardware DMA transactions) consistent with the
mapped memory.
Each device context in the list is protected with dedicated lock on per
device basis, which might be taken inside the callback routine.
When device is closing the PMD frees all MRs by calling
mlx5_mr_release(), that might call rte_free() under the taken device
lock. If this rte_free call triggers the entire memory segment freeing
it, in its turn, invokes the callback routine and attempt to take the
lock inside this one causes the deadlock.
The patch proposes the remove the device from the callback list first
and then call mlx5_mr_release() and free the remaining device MRs
explicitly.
Fixes: 0e3d0525b2 ("net/mlx5: fix memory event callback list")
Cc: stable@dpdk.org
Signed-off-by: Michael Baum <michaelba@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Only a part of members in the local structure variable named pfc_conf
are initialized in the function named cmd_priority_flow_ctrl_set_parsed
when typing "set pfc_ctrl..." command, and others are random values.
However, those uninitialized members may cause failure.
This patch adds clearing zero operation before calling the API named
rte_eth_dev_priority_flow_ctrl_set API with pfc_conf as the input
parameter.
Fixes: 9b53e542e9 ("app/testpmd: add priority flow control")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Xuan Li <lixuan47@hisilicon.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Currently, the initial values of the local structure variable named
rx_tx_onoff_2_lfc_mode and rx_tx_onoff_2_pfc_mode are different in the
similar part of these two following functions:
cmd_link_flow_ctrl_set_parsed
cmd_priority_flow_ctrl_set_parsed
1) The code snippset in cmd_link_flow_ctrl_set_parsed function:
static enum rte_eth_fc_mode rx_tx_onoff_2_lfc_mode[2][2] = {
{RTE_FC_NONE, RTE_FC_TX_PAUSE}, {RTE_FC_RX_PAUSE, RTE_FC_FULL}
};
if (!cmd || cmd == &cmd_link_flow_control_set_rx)
rx_fc_en = (!strcmp(res->rx_lfc_mode, "on")) ? 1 : 0;
if (!cmd || cmd == &cmd_link_flow_control_set_tx)
tx_fc_en = (!strcmp(res->tx_lfc_mode, "on")) ? 1 : 0;
fc_conf.mode = rx_tx_onoff_2_lfc_mode[rx_fc_en][tx_fc_en];
<...>
ret = rte_eth_dev_flow_ctrl_set(res->port_id, &fc_conf);
<...>
2) The code snippset in cmd_priority_flow_ctrl_set_parsed function:
static enum rte_eth_fc_mode rx_tx_onoff_2_pfc_mode[2][2] = {
{RTE_FC_NONE, RTE_FC_RX_PAUSE}, {RTE_FC_TX_PAUSE, RTE_FC_FULL}
};
rx_fc_enable = (!strncmp(res->rx_pfc_mode, "on",2)) ? 1 : 0;
tx_fc_enable = (!strncmp(res->tx_pfc_mode, "on",2)) ? 1 : 0;
pfc_conf.fc.mode =
rx_tx_onoff_2_pfc_mode[rx_fc_enable][tx_fc_enable];
<...>
ret = rte_eth_dev_priority_flow_ctrl_set(res->port_id, &pfc_conf);
<...>
The initial value of rx_tx_onoff_2_pfc_mode is wrong, it should be the
same as rx_tx_onoff_2_lfc_mode.
Fixes: 9b53e542e9 ("app/testpmd: add priority flow control")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Xuan Li <lixuan47@hisilicon.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When working with testpmd and setting the dynflag name, we copy the
name given by the cmd to the dynflag name.
The issue is that the size of the dynflag name is smaller then the
string used by testpmd.
This commit solves this issue by checking that the length of the requested
flag name is not too long.
Coverity issue: 353610
Fixes: b57b66a97e ("app/testpmd: support mbuf dynamic flag")
Signed-off-by: Ori Kam <orika@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
This information is useful or needed for user applications as t-rex.
Signed-off-by: Július Milan <jmilan.dev@gmail.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Some of the members of the MPLS struct are not initialized.
This commit init the uninitialized members.
Coverity issue: 325735
Fixes: 3e77031be8 ("app/testpmd: add MPLSoGRE encapsulation")
Cc: stable@dpdk.org
Signed-off-by: Ori Kam <orika@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In order to support virtio queue creation by the FW, RoCE mode
should be disabled in the device.
Do it by netlink which is like the devlink tool commands:
1. devlink dev param set pci/[pci] name enable_roce value false
cmode driverinit
2. devlink dev reload pci/[pci]
Or by sysfs which is like:
echo 0 > /sys/bus/pci/devices/[pci]/roce_enable
The IB device is matched again after ROCE disabling.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add support for live migration feature by the HW:
Create a single Mkey that maps the memory address space of the
VHOST live migration log file.
Modify VIRTIO_NET_Q object and provide vhost_log_page,
dirty_bitmap_mkey, dirty_bitmap_size, dirty_bitmap_addr
and dirty_bitmap_dump_enable.
Modify VIRTIO_NET_Q object and move state to SUSPEND.
Query VIRTIO_NET_Q and get hw_available_idx and hw_used_idx.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The HW supports only 4 bytes doorbell writing detection.
The virtio device set only 2 bytes when it rings the doorbell.
Map the virtio doorbell detected by the virtio queue kickfd to the HW
VAR space when it expects to get the virtio emulation doorbell.
Use the EAL interrupt mechanism to get notification when a new event
appears in kickfd by the guest and write 4 bytes to the HW doorbell space
in the notification callback.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add support for set_vring_state operation.
Using DevX API the virtq state can be changed as described in PRM:
enable - move to ready state.
disable - move to suspend state.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add a steering object to be managed by a new file mlx5_vdpa_steer.c.
Allow promiscuous flow to scatter the device Rx packets to the virtio
queues using RSS action.
In order to allow correct RSS in L3 and L4, split the flow to 7 flows
as required by the device.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add support for the next features in virtq configuration:
VIRTIO_F_RING_PACKED,
VIRTIO_NET_F_HOST_TSO4,
VIRTIO_NET_F_HOST_TSO6,
VIRTIO_NET_F_CSUM,
VIRTIO_NET_F_GUEST_CSUM,
VIRTIO_F_VERSION_1,
These features support depends in the DevX capabilities reported by the
device.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The HW virtq object represents an emulated context for a VIRTIO_NET
virtqueue which was created and managed by a VIRTIO_NET driver as
defined in VIRTIO Specification.
Add support to prepare and release all the basic HW resources needed
the user virtqs emulation according to the rte_vhost configurations.
This patch prepares the basic configurations needed by DevX commands to
create a virtq.
Add new file mlx5_vdpa_virtq.c to manage virtq operations.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
As an arrangement to the vitrio queues creation, a 2 QPs and CQ may be
created for the virtio queue.
The design is to trigger an event for the guest and for the vdpa driver
when a new CQE is posted by the HW after the packet transition.
This patch add the basic operations to create and destroy the above HW
objects and to trigger the CQE events when a new CQE is posted.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
In order to map the guest physical addresses used by the virtio device
guest side to the host physical addresses used by the HW as the host
side, memory regions are created.
By this way, for example, the HW can translate the addresses of the
packets posted by the guest and to take the packets from the correct
place.
The design is to work with single MR which will be configured to the
virtio queues in the HW, hence a lot of direct MRs are grouped to single
indirect MR.
Create functions to prepare and release MRs with all the related
resources that are required for it.
Create a new file mlx5_vdpa_mem.c to manage all the MR related code
in the driver.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add support for get_features and get_protocol_features operations.
Part of the features are reported by the DevX capabilities.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Support get_queue_num operation to get the maximum number of queues
supported by the device.
This number comes from the DevX capabilities.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add a new driver to support vDPA operations by Mellanox devices.
The first Mellanox devices which support vDPA operations are
ConnectX-6 Dx and Bluefield1 HCA for their PF ports and VF ports.
This driver is depending on rdma-core like the mlx5 PMD, also it is
going to use mlx5 DevX to create HW objects directly by the FW.
Hence, the common/mlx5 library is linked to the mlx5_vdpa driver.
This driver will not be compiled by default due to the above
dependencies.
Register a new log type for this driver.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Get a burst mode information for Rx/Tx queues in mlx5.
Provide callback functions to show this information in
a "show rxq info" and "show txq info" output.
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Earlier after a successful mac_addr_add operation, index was returned
by underlying layer which was unused but same as provided by DPDK API.
So API is enhanced to use application provided index location to add
MAC address entry.
Fixes: e4373bf1b3 ("net/octeontx: add unicast MAC filter")
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
MAC address table is allocated during octeontx device create and
same is used to maintain list of MAC address associated to port.
This table is not getting freed niether in case of error nor during
graceful shutdown of port.
Patch fixes memory required memory for both the cases as mentioned.
Fixes: f18b146c49 ("net/octeontx: create ethdev ports")
Cc: stable@dpdk.org
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
Tx flow controlled is disabled in the Ax silicon version due to an errata.
This errata is not applicable for HIGIG Tx flow control, therefore
not enabling in HIGIG case.
Fixes: 602009ee2d ("net/octeontx2: support HIGIG2")
Cc: stable@dpdk.org
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
The interrupt vector which bind to queues should not be larger than
the max available vector. It will cause port start failed. This patch
changed the judgement condition of the limited vector id. It can
effectively avoid vector id out of range.
Fixes: 6a6cf5f88b ("net/i40e: enable multi-queue Rx interrupt for VF")
Signed-off-by: Lunyuan Cui <lunyuanx.cui@intel.com>
Reviewed-by: Qiming Yang <qiming.yang@intel.com>
The patch distinguishes fdir rules for GTPU with or without
extend header, so flow to match below patterns can be created
correctly.
1. eth / ipv4 / udp / gtpu teid is 10 / ...
2. eth / ipv4 / udp / gtpu teid is 10 / gtp_psc / ...
3. eth / ipv4 / udp / gtpu / gtp_psc qfi is 10 / ...
4. eth / ipv4 / udp / gtpu teid is 10 / gtp_psc is 10 / ...
Fixes: efc16c6214 ("net/ice: support flow director GTPU tunnel")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Use PCI_PRI_FMT instead of "%04d:%02d:%02d:%d" print format.
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Currently, when using VXLAN-GPE or VXLAN item in the flow
both are being treated the same with flags 0x8 in VXLAN
header. Which mean the matching of the item VXLAN-GPE
will match any VXLAN packet.
This fixes the translation of VXLAN GPE item into PMD flow
item. Which will by default set the flags to VXLAN-GPE
to be 0xc.
Fixes: 3d69434113 ("net/mlx5: add Direct Verbs validation function")
Cc: stable@dpdk.org
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
thunderx-nic uses secondary VF's to provide more queues to DPDK.
Current instructions explain the concept but don't show an easy way to
find which PCI id is primary and which is secondary VF's.
This patch extending the documentation of secondary VF w.r.t
the enumeration details.
Signed-off-by: Krzysztof Kanas <kkanas@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Before C0 HW revision, The RSS adder was computed based the following
static formula.
rss_adder<7:0> = flow_tag<7:0> ^ flow_tag<15:8> ^
flow_tag<23:16> ^ flow_tag<31:24>
The above scheme has the following drawbacks:
1) It is not in line with other standard NIC behavior.
2) There can be an SW use case where SW can compute the hash
upfront using Toeplitz function and predict the queue selection
to optimize some packet lookup function. The nonstandard
way of doing XOR makes the consumer to not predict the queue selection.
C0 HW revision onward, The HW can configure the
rss_adder<7:0> as flow_tag<7:0> to align with standard NICs.
This patch adds an option to select legacy RSS adder mode
using tag_as_xor=1 devargs option while keeping the standard NIC
behavior as default.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
HW seems to populate the cfa code in the Rx descriptor even
if an explicit flow rule is not configured via application as
there might be a default rule configured in HW even for promisc
mode.
Fixes: 94eb699bc8 ("net/bnxt: support flow mark action")
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Use the MLX5_ASSERT macros instead of the standard assert clause.
Depends on the RTE_LIBRTE_MLX5_DEBUG configuration option to define it.
If RTE_LIBRTE_MLX5_DEBUG is enabled MLX5_ASSERT is equal to RTE_VERIFY
to bypass the global CONFIG_RTE_ENABLE_ASSERT option.
If RTE_LIBRTE_MLX5_DEBUG is disabled, the global CONFIG_RTE_ENABLE_ASSERT
can still make this assert active by calling RTE_VERIFY inside RTE_ASSERT.
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Use the RTE_LIBRTE_MLX5_DEBUG configuration flag to get rid of dependency
on the NDEBUG definition. This is a preparation step to switch
from standard assert clauses to DPDK RTE_ASSERT ones in MLX5 driver.
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Use the MLX4_ASSERT macros instead of the standard assert clause.
Depends on the RTE_LIBRTE_MLX4_DEBUG configuration option to define it.
If RTE_LIBRTE_MLX4_DEBUG is enabled MLX4_ASSERT is equal to RTE_VERIFY
to bypass the global CONFIG_RTE_ENABLE_ASSERT option.
If RTE_LIBRTE_MLX4_DEBUG is disabled, the global CONFIG_RTE_ENABLE_ASSERT
can still make this assert active by calling RTE_VERIFY inside RTE_ASSERT.
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Use the RTE_LIBRTE_MLX4_DEBUG compilation flag to get rid of dependency
on the NDEBUG definition. This is a preparation step to switch
from standard assert clauses to DPDK RTE_ASSERT ones in MLX4 driver.
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Remove -Werror-all flag in ICC configuration file to stop treating ICC
warnings as errors in DPDK due to many false positives. We are using
GCC and Clang as a benchmark for warnings anyway for simplification.
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Alexander Kozyrev <akozyrev@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch adds support for dynamic flag that hints transmit
datapath do not copy data to the descriptors. This flag is
useful when data are located in the memory of another (not NIC)
physical device and copying to the host memory is undesirable.
This hint flag is per mbuf for multi-segment packets.
This hint flag might be partially ignored if:
- hardware requires minimal data header to be inline into
descriptor, it depends on the hardware type and its configuration.
In this case PMD copies the minimal required number of bytes to
the descriptor, ignoring the no inline hint flag, the rest of data
is not copied.
- VLAN tag insertion offload is requested and hardware does not
support this options. In this case the VLAN tag is inserted by
software means and at least 18B are copied to descriptor.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The inline feature is designed to save PCI bandwidth by copying some
of the data to the wqe. This feature if enabled works for all packets.
In some cases when using external memory, the PCI bandwidth is not
relevant since the memory can be accessed by other means.
This commit introduce the ability to control the inline with mbuf
granularity.
In order to use this feature the application should register the field
name, and restart the port.
Signed-off-by: Ori Kam <orika@mellanox.com>
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
There are RDMA-CORE versions which are not supported multi-table for
some Mellanox mlx5 devices.
Hence, the optimization added in commit [1] which forwards all the FDB
traffic to table 1 cannot be configured.
Make the above optimization optional:
Do not fail when either table 1 cannot be created or the jump rule
(all =>jump to table 1) is not configured successfully.
In this case, all the flows will be configured to table 0.
[1] commit b67b4ecbde ("net/mlx5: skip table zero to improve
insertion rate")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Add new 4 Netlink commands to support enable/disable ROCE:
1. mlx5_nl_devlink_family_id_get to get the Devlink family ID of
Netlink general command.
2. mlx5_nl_enable_roce_get to get the ROCE current status.
3. mlx5_nl_driver_reload - to reload the device kernel driver.
4. mlx5_nl_enable_roce_set - to set the ROCE status.
When the user changes the ROCE status, the IB device may disappear and
appear again, so DPDK driver should wait for it and to restart itself.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Move Netlink mechanism and its dependencies from net/mlx5 to
common/mlx5 in order to be ready to use by other mlx5 drivers.
The dependencies are BITFIELD defines, the ppc64 compilation workaround
for bool type and the function mlx5_translate_port_name.
Update build mechanism accordingly.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
As an arrangment for Netlink command moving to the common library,
reduce the net/mlx5 dependencies.
Replace ethdev class command parameters.
Improve Netlink sequence number mechanism to be controlled by the
mlx5 Netlink mechanism.
Move mlx5_nl_check_switch_info to mlx5_nl.c since it is the only one
which uses it.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The Netlink commands interfaces is included in the mlx5.h file with a
lot of other PMD interfaces.
As an arrangement to make the Netlink commands shared with different
PMDs, this patch moves the Netlink interface to a new file called
mlx5_nl.h.
Move non Netlink pure vlan commands from mlx5_nl.c to the
mlx5_vlan.c.
Rename Netlink commands and structures to use prefix mlx5_nl.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
There might be a case that one Mellanox device can be probed by
multiple mlx5 drivers.
One case is that any mlx5 vDPA device can be probed by both net/mlx5
and vdpa/mlx5.
Add a new mlx5 common API to get the requested driver by devargs:
class=[net/vdpa].
Skip net/mlx5 PMD probing while the device is selected to be probed by
the vDPA driver.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
In order to allow RQT size configuration which is limited to the
correct maximum value, add log_max_rqt_size for DevX capability
structure.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
