Null-checking "p" suggests that it may be null, but it has already
been dereferenced on all paths leading to the check. Thus correct
the code lines and remove the redundant line.
Fixes: c84f8aa210 ("net/ice/base: add parser runtime skeleton")
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Firmware 8.4+ will return I40E_AQ_RC_ENOENT when try to delete
non-existent MAC/VLAN addresses from the HW filtering, this should
not be considered as an Admin Queue error. But in i40e_asq_send_command,
it will return I40E_ERR_ADMIN_QUEUE_ERROR if the return value of Admin
Queue command processed by Firmware is not I40E_AQ_RC_OK or
I40E_AQ_RC_EBUSY.
Use i40e_aq_remove_macvlan_v2 instead so that we can get the
corresponding Admin Queue status, and not report as an error in DPDK
when Firmware return I40E_AQ_RC_ENOENT, and this also not break with an
old firmware.
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Adjust the code line order of the parser runtime reset, since the
struct rt->psr is used in function _rt_flag_set before assignment.
Fixes: c84f8aa210 ("net/ice/base: add parser runtime skeleton")
Cc: stable@dpdk.org
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Some drivers do not provide per-queue statistics. So, there is no point
to have these misleading zeros in xstats.
Fixes: f30e69b41f ("ethdev: add device flag to bypass auto-filled queue xstats")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Parse inner L2 length to set correct packet type, and ensure that
hardware can compute the checksum successfully.
Fixes: b950203be7 ("net/txgbe: support VXLAN-GPE")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Setting exact link speed makes sense if auto-negotiation is
disabled. Fixed flag is required to disable auto-negotiation.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
It's necessary to set 1 on TXGBE_PX_INTA register to get interrupts
normally, when legacy interrupt mode is used.
Fixes: 2fc745e6b6 ("net/txgbe: add interrupt operation")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Update immediate value/pointer source operand support
for modify field RTE Flow action:
- source operand data can be presented by byte buffer
(instead of former uint64_t) or by pointer
- no host byte ordering is assumed anymore for immediate
data buffer (not uint64_t anymore)
- no immediate value offset is expected (the source
subfield is located at the same offset as in destination)
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
Setting 'RTE_LIBRTE_BNXT_TRUFLOW_DEBUG' macro cause build error,
removing it.
Also with meson build system compile time debug macros should be
documented in driver documentation, since there is no other way to
figure out their existence.
Fixes: ad9eed0248 ("net/bnxt: support flow template for Thor")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reported by "gcc (GCC) 12.0.0 20211003 (experimental)":
./drivers/net/softnic/rte_eth_softnic_cli.c:
In function ‘tmgr_hierarchy_default’:
./drivers/net/softnic/rte_eth_softnic_cli.c:634:73:
error: the comparison will always evaluate as ‘true’ for the
address of ‘tc_valid’ will never be NULL [-Werror=address]
634 | (¶ms->shared_shaper_id.tc_valid[0]) ? 1 : 0,
| ^
Fixing it by removing useless check.
Fixes: 1af2dc5111 ("net/softnic: add command for default tmgr hierarchy")
Fixes: 5eb676d74f ("net/softnic: add config flexibility to TM")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
Add support for item PORT_REPRESENTOR which should
be used instead of ambiguous item PORT_ID.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Action PORT_ID implementation assumes ingress only. Its semantics
suggests that support for equal action PORT_REPRESENTOR be added.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Semantics of the existing support for action PORT_ID suggests
that support for equal action REPRESENTED_PORT be implemented.
Helper functions keep port_id suffix since action
MLX5_FLOW_ACTION_PORT_ID is still used internally.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for actions PORT_REPRESENTOR and REPRESENTED_PORT
based on the existing support for action PORT_ID.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Add support for actions PORT_REPRESENTOR and REPRESENTED_PORT
based on the existing support for action PORT_ID.
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Add support for items PORT_REPRESENTOR and REPRESENTED_PORT
based on the existing support for item PORT_ID.
The use of item PORT_ID depends on the specified direction attribute.
Items PORT_REPRESENTOR and REPRESENTED_PORT, in turn, define traffic
direction themselves. The former matches traffic from the driver's
vNIC. The latter matches packets from either a v-port (network) or
a VF's vNIC (if the driver's port is a VF representor).
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Move rte_eth_dev, rte_eth_dev_data, rte_eth_rxtx_callback and related
data into private header (ethdev_driver.h).
Few minor changes to keep DPDK building after that.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
Currently majority of fast-path ethdev ops take pointers to internal
queue data structures as an input parameter.
While eth_rx_queue_count() takes a pointer to rte_eth_dev and queue
index.
For future work to hide rte_eth_devices[] and friends it would be
plausible to unify parameters list of all fast-path ethdev ops.
This patch changes eth_rx_queue_count() to accept pointer to internal
queue data as input parameter.
While this change is transparent to user, it still counts as an ABI change,
as eth_rx_queue_count_t is used by ethdev public inline function
rte_eth_rx_queue_count().
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Feifei Wang <feifei.wang2@arm.com>
By design, in a GROUP flow, outer match criteria go to "ENC" fields
of the action rule match specification. The current HW/FW hasn't
got support for these fields (except the VXLAN VNI) yet.
As a workaround, start parsing the pattern from the tunnel item.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Such a counter will only report the number of hits, which is actually
a sum of two contributions (the JUMP rule's own counter + indirect
increments issued by counters of the associated GROUP rules.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
By design, JUMP flows should be represented solely by the outer rules. But
the HW/FW hasn't got support for setting Rx mark from RECIRC_ID on outer
rule lookup yet. Neither does it support outer rule counters. As a
workaround, an action rule of lower priority is used to do the job.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The current HW/FW doesn't allow to match on MAC addresses in outer rules.
One day this will change for sure, but right now a workaround is needed.
Match on VLAN presence in outer rules is also unsupported. Ignore it.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Support generic callbacks which callers will invoke to get
PMD-specific actions and items used to produce JUMP and
GROUP flows and to detect tunnel information.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
GROUP is an in-house term for so-called "tunnel_match" flows.
On parsing, they are detected by virtue of PMD-internal item
MARK. It associates a given flow with its tunnel context.
Such a flow is represented by a MAE action rule which is
chained with the corresponding JUMP rule's outer rule
by virtue of matching on its recirculation ID.
GROUP flows do narrower match than JUMP flows do and
decapsulate matching packets (full offload).
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
JUMP is an in-house term for so-called "tunnel_set" flows. On parsing,
they are identified by virtue of actions MARK (PMD-internal) and JUMP.
The action MARK associates a given flow with its tunnel context.
Such a flow is represented by a MAE outer rule (OR) which has its
recirculation ID set. This ID is also associated with the tunnel
context. The OR is supposed to set this ID in 8 high bits of
Rx mark in matching packets. It also counts the packets.
Packets that hit the OR but miss in action rule (AR) table,
should go to MAE admin PF (that is, to DPDK) by default.
Support for the use of action COUNT in JUMP
flows will be introduced by later patches.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Later patches add support for tunnel offload on Riverhead (EF100).
A board can host at most 254 tunnels. Partially offloaded (missed)
tunnel packets are identified by virtue of 8 high bits in Rx mark.
Add basic definitions of the upcoming tunnel offload support and
take care of the dedicated bits in Rx mark across the driver.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
vnic_dev_capable_filter_mode() currently fails when
CMD_CAPABILITY(CMD_ADD_FILTER) returns ERR_EPERM. In turn, this
failure causes the driver initialization to fail.
But, firmware may legitimately return ERR_EPERM. For example, VF vNIC
returns ERR_EPERM when it does not support filtering at all. So, treat
ERR_EPERM as "no filtering available" instead of an unexpected error.
Fixes: 322b355f21 ("net/enic/base: bring NIC interface functions up to date")
Cc: stable@dpdk.org
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
The intr_handle->intr_vec is allocated by rte_zmalloc(), but freed by
free(), this patch fixes it.
Fixes: 02a7b55657 ("net/hns3: support Rx interrupt")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Detect the flag in Rx prefix and pass it to users.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
MAE counter engine gets generation counts by virtue of the mark,
so the code to extract the field is already in place, but flow
action MARK doesn't benefit from it. Support this use case, too.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Initial support for the method. Later patches will extend it to
make FLAG and MARK delivery available on EF100 native datapath.
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Enhance support for RSS action in the non-TruFlow path.
This will allow the user or application to update the RSS settings
using RTE_FLOW API.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Fix Rx queue state on device start.
The state of Rx queues could be incorrect in some cases
because instead of updating the state for all the Rx queues,
we are updating it for queues in a VNIC.
Fixes: 0105ea1296 ("net/bnxt: support runtime queue setup")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Aggregation rings are needed when PMD needs to support jumbo frames, LRO.
Currently we are creating the aggregation rings whether jumbo frames or
LRO has been enabled or disabled. This causes unnecessary allocation of
mbufs needing larger mbuf pool which is not used at all.
This patch modifies the code to create aggregation rings only when
needed.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Support of the keep-CRC offloading by checking
the relevant FW capability (scatter_fcs) for NIC support.
Supported offload:
DEV_RX_OFFLOAD_KEEP_CRC
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Tested-by: Idan Hackmon <idanhac@nvidia.com>
Support of the VLAN stripping offloading by checking
the relevant FW capability (vlan_cap) for NIC support.
Supported offload:
DEV_RX_OFFLOAD_VLAN_STRIP
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Tested-by: Idan Hackmon <idanhac@nvidia.com>
Support of the TSO offloading by checking
the relevant FW capability for NIC support.
Supported offloads:
DEV_TX_OFFLOAD_TCP_TSO
DEV_TX_OFFLOAD_VXLAN_TNL_TSO
DEV_TX_OFFLOAD_GRE_TNL_TSO
DEV_TX_OFFLOAD_GENEVE_TNL_TSO
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Tested-by: Idan Hackmon <idanhac@nvidia.com>
Query tunneling supported on the NIC.
Save the offloads values in a config parameter.
This is needed for the following TSO support:
DEV_TX_OFFLOAD_VXLAN_TNL_TSO
DEV_TX_OFFLOAD_GRE_TNL_TSO
DEV_TX_OFFLOAD_GENEVE_TNL_TSO
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Tested-by: Idan Hackmon <idanhac@nvidia.com>
Currently, the PMD decides if the tunneling offload
can enable VXLAN/GRE/GENEVE tunneled TSO support by checking
config->tunnel_en (single bit) and config->tso.
This is incorrect, the right way is to check the following
flags returned by the mlx5dv_query_device function:
MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_VXLAN - if supported the offload
DEV_TX_OFFLOAD_VXLAN_TNL_TSO can be enabled.
MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_GRE - if supported the offload
DEV_TX_OFFLOAD_GRE_TNL_TSO can be enabled.
MLX5DV_RAW_PACKET_CAP_TUNNELED_OFFLOAD_GENEVE - if supported the offload
DEV_TX_OFFLOAD_GENEVE_TNL_TSO can be enabled.
The fix enables the offloads according to the correct
flags returned by the kernel.
Fixes: dbccb4cddc ("net/mlx5: convert to new Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Tested-by: Idan Hackmon <idanhac@nvidia.com>
Query software parsing supported on the NIC.
Save the offloads values in a config parameter.
This is needed for the outer IPv4 checksum and
IP and UDP tunneled packet TSO support.
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Tested-by: Idan Hackmon <idanhac@nvidia.com>
Currently, the PMD decides if the software parsing
offload can enable outer IPv4 checksum and tunneled
TSO support by checking config->hw_csum and config->tso
respectively.
This is incorrect, the right way is to check the following
flags returned by the mlx5dv_query_device function:
MLX5DV_SW_PARSING - check general swp support.
MLX5DV_SW_PARSING_CSUM - check swp checksum support.
MLX5DV_SW_PARSING_LSO - check swp LSO/TSO support.
The fix enables the offloads according to the correct
flags returned by the kernel.
Fixes: e46821e9fc ("net/mlx5: separate generic tunnel TSO from the standard one")
Cc: stable@dpdk.org
Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Matan Azrad <matan@nvidia.com>
Tested-by: Idan Hackmon <idanhac@nvidia.com>
When the iavf_adapter instance is not initialized completely in the
primary process, the secondary process accesses its "rte_eth_dev"
member, it causes secondary process crash.
This patch replaces eth_dev with eth_dev_data in iavf_adapter.
Fixes: f978c1c9b3 ("net/iavf: add RSS hash parsing in AVX path")
Fixes: 9c9aa00403 ("net/iavf: add offload path for Rx AVX512 flex descriptor")
Fixes: 63660ea3ee ("net/iavf: add RSS hash parsing in SSE path")
Cc: stable@dpdk.org
Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds some defines related to DDP Track ID.
Signed-off-by: Artur Tyminski <arturx.tyminski@intel.com>
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Update FVL FW API version to 1.15
Signed-off-by: Maciej Paczkowski <maciej.paczkowski@intel.com>
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add raw format for i40e_32byte_rx_desc, right now this only be used
by kernel driver, the commit is just to sync with kernel driver.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add macros and structures for MAC frequency calculation in case the link
is not present.
Remove duplicate definition in i40e_ethdev.c
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The variable checksum from i40e_calc_nvm_checksum is used before return
value is checked. Fix this logic.
Fixes: 8db9e2a1b2 ("i40e: base driver")
Fixes: 3ed6c3246f ("i40e/base: handle AQ timeout when releasing NVM")
Cc: stable@dpdk.org
Signed-off-by: Christopher Pau <christopher.pau@intel.com>
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The status of i40e_read_nvm_word is not checked, so variables set
from this function could be used uninitialized. In this case, preserve
the existing flow that does not block initialization by initializing
these values from the start.
Fixes: 8d6c51fcd2 ("i40e/base: get OEM version")
Fixes: 2db7057424 ("net/i40e/base: limit PF/VF specific code to that driver only")
Cc: stable@dpdk.org
Signed-off-by: Christopher Pau <christopher.pau@intel.com>
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Fix mismatched function name in comments.
Fixes: 8db9e2a1b2 ("i40e: base driver")
Fixes: 842ea19963 ("i40e/base: save link module type")
Fixes: fd72a2284a ("i40e/base: support LED blinking with new PHY")
Fixes: 788fc17b2d ("i40e/base: support proxy config for X722")
Cc: stable@dpdk.org
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Robin Zhang <robinx.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
