When a RSS rule with only SRC/DST_ONLY or IPV6 prefix RSS type,
it should return failure. Besides, when a RSS rule with symmetric
hash function, the RSS type shouldn't carry with SRC/DST_ONLY.
This patch adds invalid RSS type check for the two cases.
Fixes: 0b952714e9c1 ("net/ice: refactor PF hash flow")
Signed-off-by: Simei Su <simei.su@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When function ice_get_tun_type_for_recipe() get tunnel type,
for ICE_NON_TUN we need to include gtp-c and some gtp-u ptype
with no payload, as they do not have tunnel packet as paylod.
Fixes: 418d2563d10b ("net/ice/base: get tunnel type for recipe")
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Tested-by: Nannan Lu <nannan.lu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The current bonding PMD driver call mac_address_slaves_update function
to modify the MAC address of all slaves devices. In
mac_address_slaves_update function, the rte_eth_dev_default_mac_addr_set
API function is called to set the MAC address of the slave devices in
turn in the for loop statement.
When one port reset, calling rte_eth_dev_default_mac_addr_set API fails
because the firmware will not respond to the commands from the driver,
and exit the loop, so other slave devices cannot continue to update the
MAC address.
This patch fixes the issue by avoid exiting the loop when calling
rte_eth_dev_default_mac_addr_set fails.
Fixes: 2efb58cbab6e ("bond: new link bonding library")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Xuan Li <lixuan47@hisilicon.com>
Currently, based on a active-backup bond device, when the link status of
the primary port changes from up to down, one slave port changes to the
primary port, but the new primary port's MAC address cannot change to
the bond device's MAC address. And we can't continue receive packets
whose destination MAC addresses are the same as the bond devices's MAC
address.
The current bonding PMD driver call mac_address_slaves_update function
to modify the MAC address of all slaves devices: the primary port using
bond device's MAC address, and other slaves devices using the respective
MAC address. We found that one error using primary_port instead of
current_primary_port in mac_address_slaves_update function.
On the other hand, The current bonding PMD driver sets slave devices's
MAC address according to the variable named current_primary_port. The
variable named current_primary_port changes in the following scenario:
1. Add the slave devices to bond, the first slave port will be regarded
as the current_primary_port. If changing the order of adding the
slave devices, the value of the variable named current_primary_port
will be different.
2. The upper application specifies primary_port via calling the
rte_eth_bond_primary_set API function.
3. Delete the primary slave device.
4. The link status of the primary port changes from up to down.
We have tested the above 4 cases and found that there are problems that
the new primary port's MAC address didn't change to the bond device's
MAC address when running case 3 and 4. When current_primary_port
changes, the new primary port's MAC address should change at the same
time. We also need to call mac_address_slaves_update function to update
MAC addresses in case
3 and 4.
Bugzilla ID: 256
Fixes: 2efb58cbab6e ("bond: new link bonding library")
Cc: stable@dpdk.org
Signed-off-by: Chunsong Feng <fengchunsong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
When TRUFLOW is not enabled ulp_ctx is not allocated.
In non-vector Tx datapath we are accessing this invalid pointer
resulting in a segfault. Check if TRUFLOW is enabled before
accessing ulp_ctx to avoid this.
Fixes: 1e46b3962620 ("net/bnxt: fill cfa action in Tx descriptor")
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Add a missing available check and fix the wrong address passed
to munmap on init failure.
Fixes: dd6590fe2fd7 ("af_packet: fix possible memory leak")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add missing code to free memory when the device initialization fails.
Fixes: ccd37d341e8d ("net/af_packet: remove queue number limitation")
Fixes: 5f19dee604ed ("drivers/net: do not use private ethdev data")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Zero is a valid fd. It will fail to check the fd if the fd is zero.
Fixes: 527740ccfaec ("af_packet: fix some leaks")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Because the return value of rte_vdev_init() has multiple non-zero
values, when rte_vdev_init() return non-zero in the
rte_eth_bond_create() function, it should return the actual error code
rather than -ENOMEM.
Fixes: 68451eb6698c ("net/bonding: call through EAL on create/free")
Cc: stable@dpdk.org
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch fix the error line break in the output format of flow query
Fixes: bdb1d61690f7 ("app/testpmd: support RSS config in flow query")
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Tested-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
According to the definition of RSS types of action attributes from
testpmd, the driver will not disable RSS but instead requests the
unspecified "best-effort" settings when upper application call
rte_flow_create API function to create flow using empty RSS types.
As a result, here use the default RSS types when RSS types is empty.
Fixes: c37ca66f2b27 ("net/hns3: support RSS")
Cc: stable@dpdk.org
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
CRC is the end of frame, which occupies 4 bytes. Keeping CRC is a
feature of MAC, which will not strip CRC field when receiving frames.
The feature can be enabled using DEV_RX_OFFLOAD_KEEP_CRC offload by
upper level application. And the feature is only supported for hns3 PF
PMD driver, not supported for hns3 VF PMD driver
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
The 200G device has a new device id 0xA228, so adds this device id
to pci table for pci driver can probe it. Similar to the network port
with other speed, the hns3 PMD driver gets 200G speed information
from firmware, and passes them to DPDK framework.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
The hns3 network engine is built-in multiple SoCs, such as kunpeng 920,
kunpeng 930, etc. The PCI revision id is 0x21 in kunpeng 920, and the
PCI revision id is 0x30 in kunpeng 930.
Copper media type is supported for hns3 PF device in kunpeng 930 and
later SoCs. The configuration operation for PHY is implemented by
firmware.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Previous logic in removing RSS for GTPU was added in incorrect lines.
The adjustment in this patch will correct the code order so that RSS
for GTPU can be removed successfully.
We also delete the redundant print statement and cleanup the coding
style in this patch.
Fixes: bed9bb3139ef ("net/ice/base: fix GTP-U inner RSS IPv4 IPv6 co-exist")
Cc: stable@dpdk.org
Signed-off-by: Junfeng Guo <junfeng.guo@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch updates the minimum driver version that supports
Intel QuickAssist device D15xx.
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
The variable names crc_length and crc_offset have been changed to
crc_data_len and crc_data_ofs respectively, to make it clearer as to
their use i.e. the length and offset of the data over which the CRC is
calculated.
Fixes: 6f0ef237404b ("crypto/qat: support DOCSIS protocol")
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Multi-segment mbufs are not supported for DOCSIS security protocol.
This patch adds an explicit check for this and returns an op error if
this case is found. This limitation is also added to the QAT cryptodev
documentation.
Fixes: 6f0ef237404b ("crypto/qat: support DOCSIS protocol")
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This patch improves the DOCSIS session creation as follows:
- it validates the security action type as well as the protocol before
creating a session and now does this validation before allocating the
session from the mempool
Fixes: fda5216fba55 ("crypto/aesni_mb: support DOCSIS protocol")
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch improves the DOCSIS session creation as follows:
- it validates the security action type as well as the protocol before
creating a session and now does this validation before allocating the
session from the mempool
- it clears the entire private session struct before populating it with
DOCSIS session info, in case any data was left over from the last time
it was used
- it simplifies the DOCSIS parameter setting, which was overly
complicated
Fixes: 6f0ef237404b ("crypto/qat: support DOCSIS protocol")
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
The RTE_CRYPTODEV_FF_SECURITY feature was disabled through the
ff_disable device configuration option for all crypto performance tests,
including security related tests. This patch updates the crypto
performance tool to not disable RTE_CRYPTODEV_FF_SECURITY for DOCSIS and
PDCP security tests.
Fixes: d4a131a9498d ("test/crypto-perf: support DOCSIS protocol")
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The RTE_CRYPTODEV_FF_SECURITY feature was disabled through the
ff_disable device configuration option for all cryptodev tests,
including security related tests. This patch updates the cryptodev unit
tests to not disable RTE_CRYPTODEV_FF_SECURITY for DOCSIS and PDCP
security tests.
Fixes: ea31f2b4f547 ("test/crypto: add DOCSIS security cases")
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The AESNI-MB CPU test cases, which are executed via the
cryptodev_cpu_aesni_mb_autotest command, aborted when it tried to run
the DOCSIS security tests as these are not CPU type tests. The abort
happened at the following line in process_crypto_request():
RTE_VERIFY(gbl_action_type != RTE_SECURITY_ACTION_TYPE_CPU_CRYPTO);
The tests have been updated not to run the DOCSIS (or PDCP) security
tests during cryptodev_cpu_aesni_mb_autotest, with the decision based on
improved PMD security capability checks.
Fixes: ea31f2b4f547 ("test/crypto: add DOCSIS security cases")
Signed-off-by: David Coyle <david.coyle@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch moves otx2_sec_session structure to otx2_security.h
to make it common for inline and lookaside protocol modes of
rte_security
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
The patch reverts the commit that updated Intel QuickAssist GEN3
marketing name. The change was not backported and has to be withdrawn.
This reverts commit 9cd9d3e702fba4700539c1a2eddac13dd14ecf70
Signed-off-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Because capability memzone of compression does not have lookup
call, second and subsequent devices cannot be created.
Fixes: 7788dceccb80 ("common/qat: add multi-process handling of capabilities")
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
Acked-by: Adam Dybkowski <adamx.dybkowski@intel.com>
Tested-by: Yu Jiang <yux.jiang@intel.com>
Application updates first line of each test vector with
COUNT = i(where i = 1,2,3..) assuming first line contains
COUNT string. But few of the TDES input test vectors don't
contain COUNT string and thus COUNT is getting overwritten on
other data.
Fixes: 527cbf3d5ee3 ("examples/fips_validation: support TDES parsing")
Cc: stable@dpdk.org
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Kanaka Durga Kotamarthy <kkotamarthy@marvell.com>
Processing of test vector for COUNT = 0 is getting skipped, as
some of the NIST TDES files doesn't have an empty line after
[ENCRYPT]/[DECRYPT] and thus treated as an interim block.
Parse function now identifies such blocks, separates out interim
and test vector data, and then parses each with their respective
callbacks.
Fixes: 3d0fad56b74a ("examples/fips_validation: add crypto FIPS application")
Cc: stable@dpdk.org
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Ayuj Verma <ayverma@marvell.com>
Fix missing callback registration and the incorrect
callback definition for interim NK_STR. The callback
should compare input key against the interim.
Fixes: 527cbf3d5ee3 ("examples/fips_validation: support TDES parsing")
Cc: stable@dpdk.org
Signed-off-by: Archana Muniganti <marchana@marvell.com>
In the IPSEC ESN test vector the cipher offset for encryption
should be 8 bytes which is the size of esp header.
This patch also changes the ciphertext and the digest reference
data against which the operation result is validated.
Fixes: 699741912d71 ("test/crypto: add case for auth only trailer")
Cc: stable@dpdk.org
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
scheduler PMD uses its own hand-made peek functions
that directly access rte_ring internals.
As now rte_ring has an API for that type of functionality -
change scheduler PMD to use API provided by rte_ring.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch limits the number of client connections to the new telemetry
socket. The limit is set to 10.
Signed-off-by: Ciara Power <ciara.power@intel.com>
The hairpin queue is the one that start from normal rxq,
and will be less than nr_queues where nr_queues is the
sum of normal and hairpin.
Fixes: bf3688f1e816 ("app/flow-perf: add insertion rate calculation")
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Reviewed-by: Asaf Penso <asafp@mellanox.com>
In order to deprecate the rte_atomic and rte_smp barrier APIs [1], prevent
the patches from using these APIs and __sync builtins in new code.
Please use __atomic builtins instead of __sync builtins, rte_atomicNN_xxx
and rte_smp_[r/w]mb APIs.
On x86 the __atomic_thread_fence(__ATOMIC_SEQ_CST) is quite expensive for
SMP case. Flag the new code which use __atomic_thread_fence API.
Please use rte_thread_fence API instead of __atomic_thread_fence builtins.
1: Refer to the locks-and-atomic-operations section in
https://doc.dpdk.org/guides/prog_guide/writing_efficient_code.html
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Provide a wrapper for __atomic_thread_fence builtins to support
optimized code for __ATOMIC_SEQ_CST memory order for x86 platforms.
Suggested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Signed-off-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ola Liljedahl <ola.liljedahl@arm.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add information about possible optimizations using C11 atomic builtins.
Signed-off-by: Phil Yang <phil.yang@arm.com>
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
If Jansson was found, the headers list is overwritten when including
rte_metrics_telemetry.h, which prevents rte_metrics.h from being
installed. This is now fixed to add to headers, rather than overwrite,
to allow both headers be installed when Jansson is present.
Fixes: c5b7197f662e ("telemetry: move some functions to metrics library")
Cc: stable@dpdk.org
Signed-off-by: Ciara Power <ciara.power@intel.com>
Acked-by: David Marchand <david.marchand@redhat.com>
This change is required to allow the branch ratio algorithm to
power manage cores with no workload running on them. This is
useful both when idle cores don't use C-states and for a number of
hyperthreading scenarios.
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Reviewed-by: David Hunt <david.hunt@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
This modification allows for the branch ratio threshold to be set
per core rather than system wide. This gives greater flexibility to
the branch ratio monitoring allowing it to manage different
workloads with different characteristics on the same system.
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Reviewed-by: David Hunt <david.hunt@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Change the log level for RTE_TEST_ASSERT macro to error to help
log errors while running test cases.
Suggested-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Lukasz Wojciechowski <l.wojciechow@partner.samsung.com>
abidiff can provide some more information about the ABI difference it
detected.
In all cases, a discussion on the mailing must happen but we can give
some hints to know if this is a problem with the script calling abidiff,
a potential ABI breakage or an unambiguous ABI breakage.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Aaron Conole <aconole@redhat.com>
'librte_rcu' is now dependency to 'librte_lpm' library, this dependency
should be reflected to build system.
Fixes: 8a9f8564e9f9 ("lpm: implement RCU rule reclamation")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
