Add support for digest support for various algorithms.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Archana Muniganti <marchana@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
The set key functions are added in roc to be used
in crypto operations.
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add code that can be leveraged across
lookaside and inline IPsec on cn10k.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
EC group static vectors are required for CPT asymmetric
crypto operations.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add scalar FPM tables to be used for asymmetric crypto
operations.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add routine to initialize LMTLINE which facilitates instruction
submission to CPT. Add common macros required in the enqueue
operations.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Ankur Dwivedi <adwivedi@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Microcode AE opcodes support asymmetric operations. Add defines
and structs defined by microcode.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Microcode SE opcodes support symmetric operations. Add defines
and structs defined by microcode.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Add CPT hardware definitions. CPT is the hardware block on
cnxk family of processors, that can be used to offload
cryptographic operations.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Vidya Sagar Velumuri <vvelumuri@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Since the offload values are always the same, these can
just be data instead of code.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Since these always return 0, they were doing nothing useful.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Keith Wiles <keith.wiles@intel.com>
When we use the following cmd to modify the link speed of specified
port: "port config <port_id> speed xxx duplex xxx", we have to stop
all ports. It's not necessary.
Fixes: 82113036e4 ("ethdev: redesign link speed config")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Remove queue stats from basic stats because they're now available
via xstats API. Also remove RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS flag.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add link status event pre-conditions in the driver documentation.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Replacing memcpy() with rte_memcpy() improved 64 byte packet
performance by 33% on a POWER9 system and by 10% on an x86_64
system.
Signed-off-by: David Christensen <drc@linux.vnet.ibm.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
The struct rte_flow_action was missing from DPDK API documentation.
Fixes: 3850cf0c8c ("ethdev: add tunnel encap/decap actions")
Cc: stable@dpdk.org
Signed-off-by: Jan Viktorin <viktorin@cesnet.cz>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Aman Deep Singh <aman.deep.singh@intel.com>
In a multi-TC scenario, if the length of packets destined for different
TCs is different, for example, 64B and 1500B packets destined for TC0 and
TC1 respectively. There is a problem that the bandwidth of the TC to which
large packets are sent is preempted by the TC to which small packets are
sent on the Kunpeng 920 network engine. As a result, the TC bandwidth
accuracy is inaccurate.
To solve this problem, this patch made the following adjustments:
1/ During initialization, firmware reports the capability bit indicating
whether the TM function is supported.
2/ The command word for configuring TC and port rate limiting is added,
instead of reusing the existing command word. And firmware configured
to the correct module.
3/ When the PF driver is loaded, firmware completes the default
initialization of the TC and port.
Fixes: c09c7847d8 ("net/hns3: support traffic management")
Cc: stable@dpdk.org
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
This patch creates a new function for handling PF probing of a secondary
process. A CPP handle is obtained for the CPP bridge service and the
service itself is also registered during secondary process
initialization. DPDK services aren't shared between processes so it is
not enough to only have the primary register the service if it is also
needed in a secondary process. This implies that both the primary and
secondary will have their own copy of the bridge service.
Fixes: 5e15e799d6 ("net/nfp: create separate entity for PF device")
Cc: stable@dpdk.org
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
When using rte_eth_dev_pci_generic_probe() during probing a
rte_eth_dev will be created with the name field corresponding to the PCI
address of the device. NFP4000/6000 devices only have a single PF (but
potentially multiple physical ports). This means that in a simple two
port example the rte_eth_devices[] array will be populated with two
devices: 0000:02:00.0 and 0000:02:00.0_port1. This is inconsistent and
not ideal. It will also cause issues when a secondary process tries to
attach to these ports.
This patch removes the use of rte_eth_dev_pci_generic_probe() and
allocates eth_dev's for each physical port during PF initialization,
giving them more consistent names.
Fixes: 5e15e799d6 ("net/nfp: create separate entity for PF device")
Cc: stable@dpdk.org
Signed-off-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
- Disable unsupported apps on Windows
- Enable building of testpmd on Windows
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Function print_fdir_mask and print_fdir_flex_payload are only called
when either i40e or ixgbe presents. Extend existing #if defined to
include these two functions, to remove "unused function" compilation
warning.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
