Precompiler instructions #ifdef RTE_LIBRTE_I40E_PMD ... #endif
were not placed correctly, which caused number of
compilation errors if I40E PMD is disabled.
Fixes: 5a4806d304 ("app/testpmd: support updating pctype mapping")
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
In container, the process cannot be terminated by SIGINT/SIGTERM when
execute with 'stats-period' option.
Fixed by adding a flag to exit stats period loop after received either
SIGINT or SIGTERM.
Fixes: cfea1f3048 ("app/testpmd: print statistics periodically")
Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
The corrupted code didn't check the port availability when
it was trying to set the forward port IDs array.
However, when it was counting the number of ports, the availability
was checked by RTE_ETH_FOREACH_DEV iterator.
Hence, even when ETH devices ports were not in ATTACHED state,
the testpmd tried to forward traffic by them and got segmentation
fault at queue access time.
For example:
When EAL command line parameters include two devices, the first
is failsafe with two sub devices and the second is any device,
testpmd gets two devices by the iterator and sets for forwarding
both, the failsafe device and the failsafe first sub device
(instead of the second sub device).
After the first failsafe sub device state was changed to DEFERRED,
testpmd tries to forward traffic through the deferred device
because it didn't check the port availability in setting time.
The fix uses the RTE_ETH_FOREACH_DEV iterator for the forward
port IDs default setting.
Fixes: cb894d99ec ("ethdev: add deferred intermediate device state")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
in parse_ringnuma_config/parse_portnuma_config functions, port_id
should be less than RTE_MAX_ETHPORTS, but port_id_is_invalid check
assumes that port_id may be RTE_PORT_ALL (65535).
Also fix port_id storage size.
Fixes: 4468635fdd ("app/testpmd: forbid actions on invalid port")
Cc: stable@dpdk.org
Signed-off-by: Li Han <han.li1@zte.com.cn>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This issue was about passing unsigned argument where should be signed
number.
In reality this is about wrong usage of fseek and ftell to determine
filesize.
This patch is compliant to suggestions from FIO19-C:
"Do not use fseek() and ftell() to compute the size of a regular file"
Coverity issue: 143454
Fixes: a92a5a2cbb ("app/testpmd: add command for loading DDP")
Cc: stable@dpdk.org
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Currently, testpmd just allows to query the RETA info only when the
required size equals to configured RETA size.
This patch allows to query any RETA size <= the configured size. This
helps when the RETA size is big (say 512) and when I just want to peak
few RETA entries.
Signed-off-by: Yuanhan Liu <yliu@fridaylinux.org>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds GSO support to the csum forwarding engine. Oversized
packets transmitted over a GSO-enabled port will undergo segmentation
(with the exception of packet-types unsupported by the GSO library).
GSO support is disabled by default.
GSO support may be toggled on a per-port basis, using the command:
"set port <port_id> gso on|off"
The maximum packet length (including the packet header and payload) for
GSO segments may be set with the command:
"set gso segsz <length>"
Show GSO configuration for a given port with the command:
"show port <port_id> gso"
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The GRO library provides two modes to reassemble packets. Currently, the
csum forwarding engine has supported to use the lightweight mode to
reassemble TCP/IPv4 packets. This patch introduces the heavyweight mode
for TCP/IPv4 GRO in the csum forwarding engine.
With the command "set port <port_id> gro on|off", users can enable
TCP/IPv4 GRO for a given port. With the command "set gro flush <cycles>",
users can determine when the GROed TCP/IPv4 packets are flushed from
reassembly tables. With the command "show port <port_id> gro", users can
display GRO configuration.
The GRO library doesn't re-calculate checksums for merged packets. If
users want the merged packets to have correct IP and TCP checksums,
please select HW IP checksum calculation and HW TCP checksum calculation
for the port which the merged packets are transmitted to.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Call the mlockall() function, to attempt to lock all of its process
memory into physical RAM, and preventing the kernel from paging any
of its memory to disk.
When using testpmd for performance testing, depending on the code path
taken, we see a couple of page faults in a row. These faults effect
the overall drop-rate of testpmd. On Linux the mlockall() call will
prefault all the pages of testpmd (and the DPDK libraries if linked
dynamically), even without LD_BIND_NOW.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
When using EXTRA_CFLAGS="-g -O3" in the build the -O3 causes
compiler warnings. Using Ubuntu 17.04 gcc compiler.
Signed-off-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
As for the testpmd flow command which uses uint16_t since the beginning by
chance, switch to portid_t for consistency.
Fixes: 14ab03825b1d ("ethdev: increase port id range")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Extend port_id definition from uint8_t to uint16_t in lib and drivers
data structures, specifically rte_eth_dev_data. Modify the APIs,
drivers and app using port_id at the same time.
Fix some checkpatch issues from the original code and remove some
unnecessary cast operations.
release_17_11 and deprecation docs have been updated in this patch.
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The compilation with gcc-6.3.0 and EXTRA_CFLAGS=-Og gives the following
error:
CC cperf_test_verify.o
cperf_test_verify.c: In function ‘cperf_verify_op’:
cperf_test_verify.c:382:5: error: ‘auth’ may be used uninitialized
in this function
[-Werror=maybe-uninitialized]
if (auth == 1) {
^
cperf_test_verify.c:371:5: error: ‘cipher’ may be used uninitialized
in this function
[-Werror=maybe-uninitialized]
if (cipher == 1) {
^
cperf_test_verify.c:384:11: error: ‘auth_offset’ may be used
uninitialized in this function
[-Werror=maybe-uninitialized]
res += memcmp(data + auth_offset,
^~~~~~~~~~~~~~~~~~~~~~~~~~
vector->digest.data,
~~~~~~~~~~~~~~~~~~~~
options->digest_sz);
~~~~~~~~~~~~~~~~~~~
cperf_test_verify.c:377:11: error: ‘cipher_offset’ may be used
uninitialized in this function
[-Werror=maybe-uninitialized]
res += memcmp(data + cipher_offset,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
vector->plaintext.data,
~~~~~~~~~~~~~~~~~~~~~~~
options->test_buffer_size);
~~~~~~~~~~~~~~~~~~~~~~~~~~
There is no default case in the switch statement, so if options->op_type
is an unknown value, the function will use uninitialized values. Fix it
by adding a default.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
data is allocated but never freed.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add new commands to manipulate with dynamic flow type to
pctype mapping table in i40e PMD.
Commands allow to print table, modify it and reset to default value.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Update 'ddp get info' command to display protocols defined in a profile
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Port info command prints information about all supported flow types,
including dynamically mapped ones.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
Testpmd calculates packet throughput by getting a diff of previous stats
value and current one.
If a stats clear called after previous sample taken, the diff will be
negative and throughput calculation will be wrong.
If current stats value is smaller than previous one, set throughput to
zero.
Fixes: 0e10698030 ("app/testpmd: show throughput in port stats")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The testpmd was doing old BSD lint style casts of rte_memcpy
to (void). This is unnecessary.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
When adding a VF MAC address, rte_eth_dev_mac_addr_add is called.
It's not right, because this API is used to add a MAC address for
a VMDq pool not a VF. Although it can work on ixgbe as VMDq pool
and VF mean the same thing on ixgbe.
Fixes: 7741e4cf16 ("app/testpmd: VMDq and DCB updates")
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When PF is reset, a message will show it and all its
VF need to be reset.
User can run the command "port reset port_id"
to reset the VF port and to keep same port id without
any configuration. Then user can run "port stop port_id"
and "port start port_id" to reconfigure its forwarding
mode and parameters as previous ones.
To avoid crash, current forwarding should be stopped
before running "port reset port_id".
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
In crypto latency test, when some crypto operations cannot be
enqueued, they are returned to its mempool.
However, instead of freeing the operations in the array passed
to the enqueue function, the app was freeing the operations
in the array passed to the dequeue function, leading to incorrect
results.
Fixes: 15b55dd751 ("app/crypto-perf: return crypto ops to mempool in bulk")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Memory is reserved after each crypto operation
for the necessary IV(s), which could be for cipher,
authentication or AEAD algorithms.
However, for AEAD algorithms (such as AES-GCM), this
memory was not being reserved, leading to potential
memory overflow.
Fixes: 8a5b494a7f ("app/test-crypto-perf: add AEAD parameters")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The lsc_interrupt flag is enabled by default, and when the --tx-first is
used as a command line parameter, the 32 packets can be sent out before
the link state is up, resulting in the loss of the packets, and no further
forwarding will take place.
E.g. ./build/app/testpmd -c f0 -- --tx-first --stats-period 1
When the --tx-first is used, the lsc_interrupt flag needs to be disabled,
ensuring the links are up before forwarding traffic. Therefore, during the
parameter checking at startup, if --tx-first is used, we now warn the user,
and set lsc_interrupt to 0.
Fixes: 99cabef088 ("app/testpmd: add parameter to start forwarding Tx first")
Signed-off-by: David Hunt <david.hunt@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
In testpmd, GRO is supported by csum forwarding engine, but the cmdline
message shows GRO is supported by io forwarding engine. This patch is
to fix this issue.
Fixes: b40f8d782b ("app/testpmd: enable TCP/IPv4 GRO")
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
pkts == 0 will result in divide by zero case.
Added a check to fix it.
Coverity issue: 158652
Fixes: 9d3aeb185e ("app/testeventdev: launch perf lcores")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The corrupted code checks only RAW flow item type special case for
returning its size but doesn't deal with any other flow item type
and returns 0 for all the others.
This bug leaves the flow descriptor empty for non RAW types.
The fix takes the correct size to any regular types from appropriate
array.
The same issue, with a similar fix, is in flow action size method which
deals only with RSS special type.
Fixes: 938a184a18 ("app/testpmd: implement basic support for flow API")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The device state should be handled by the ethdev layer when possible.
Applications should not have to do it.
Not setting the state to UNUSED will make the port_id of the device
valid for all ethdev API functions, usually resulting in segfault.
Fixes: 284c908cc5 ("app/testpmd: request device removal interrupt")
Cc: stable@dpdk.org
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Tested-by: Shachar Beiser <shacharbe@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
When using CSV, the output of the throughput performance numbers
was not correct, representing decimal numbers incorrectly.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
If the crypto operation pool size is too small,
the pool might run out of operations, if all the crypto operations
are still being used and have not been freed.
To inform the user about this, the application should display
an error message, asking the user to increase the pool size
through the app parameters.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
when creating a bond device in testpmd, a name for a device must meet
the correct convention described in the documentation:
The device name must start with the net_bonding prefix
followed by numbers or letters.
Change for ALB mempool allocation - mem_name was too long.
Fixes: 9bf4901d1a ("bus/vdev: remove probe with driver name option")
Cc: stable@dpdk.org
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
While matching user input against a token name or any other fixed string,
comparison stops at the end of user input if shorter (e.g. "foo" matches
token name "foobar").
Although the unintended consequence of this behavior allows users to
abbreviate command names and various parameters yet generate valid
commands, the parser was not designed to support this and does not prevent
ambiguous tokens.
For instance, entering "i" for a pattern item matches "ipv4", "ipv6" and
"icmp" then defaults to one of them in an unspecified manner.
Prevent this behavior by taking the length of fixed strings into account.
Fixes: 19c90af628 ("app/testpmd: add flow command")
Fixes: 5ac3502ed1 ("app/testpmd: add flow query command")
Fixes: abc3d81aca ("app/testpmd: add item raw to flow command")
Fixes: 05d34c6e9d ("app/testpmd: add queue actions to flow command")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Support for dynamic tokens was added in order to implement the flow command
in testpmd, for which static tokens were not versatile enough due to the
large number of possible parameter combinations.
However, due to its reliance on a temporary array to store dynamic tokens,
this interface suffers from various limitations that need to be addressed
in order to implement more commands in the future:
- The maximum number of dynamic tokens is determined at compilation time
(CMDLINE_PARSE_DYNAMIC_TOKENS). The larger this value, the more stack
space is wasted (one pointer per potential token, i.e. 1kB of stack space
on 64-bit architectures with the default value).
- This temporary array is actually a cache in which entries already present
are not regenerated. This behavior is not documented, which makes dynamic
tokens practically unusable by applications as they do not know which
token is current.
- The cache does not really reduce the number of function calls needed to
retrieve tokens, it was mainly deemed useful to provide context about
other tokens to the generator callback.
- Like testpmd, most users will likely use repeated pointers to a fixed
token header structure (cmdline_token_hdr_t), with internal context-aware
callbacks that do not need to look at other entries; knowing the index of
the current token is enough.
Getting rid of the temporary array and properly documenting usage of the
token generator callback greatly simplifies this interface.
Fixes: 4fffc05a2b ("cmdline: support dynamic tokens")
Fixes: 19c90af628 ("app/testpmd: add flow command")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Call of rte_cryptodev_stop() function from test destructors
is added.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Additional Authenticated Data (AAD) is called "aad" in most
places of cryptodev, but it was called "add_auth_data"
in the AEAD transform transform (aead_xform).
This field is renamed to "aad_length" in order to keep
consistency.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Additional Authenticated Data (AAD) was removed from the
authentication parameters, but still the supported size
was part of the authentication capabilities of a PMD.
Fixes: 4428eda8bb ("cryptodev: remove AAD from authentication structure")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
This patch add support for different aggregator modes in similar manner
that is provided in linux kernel.
testpmd> set bonding agg_mode <port_id> <agg_name>
testpmd> show bonding config <port_id>
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Providing this parameter requests flow API isolated mode on all ports at
initialization time. It ensures all traffic is received through the
configured flow rules only (see flow command).
Ports that do not support this mode are automatically discarded.
Signed-off-by: Vasily Philipov <vasilyf@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch enables TCP/IPv4 GRO library in csum forwarding engine.
By default, GRO is turned off. Users can use command "gro (on|off)
(port_id)" to enable or disable GRO for a given port. If a port is
enabled GRO, all TCP/IPv4 packets received from the port are performed
GRO. Besides, users can set max flow number and packets number per-flow
by command "gro set (max_flow_num) (max_item_num_per_flow) (port_id)".
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Remove the dependency of this subsystem upon bus specific device
representation.
Devargs only validates that a device declaration is correct and handled
by a bus. The device interpretation is done afterward within the bus.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Replace the incorrect reference to "Cavium Networks", "Cavium Ltd"
company name with correct the "Cavium, Inc" company name in
copyright headers.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This is a performance test case that aims at testing the following:
1. Measure the number of events can be processed in a second.
2. Measure the latency to forward an event.
The atq queue test functions as same as "perf_queue" test.
The difference is, it uses, "all type queue" scheme instead of separate
queues for each stage and thus reduces the number of queues required to
realize the use case and enables flow pinning as the event does not
move to the next queue.
Example command to run perf "all types queue" test:
sudo build/app/dpdk-test-eventdev --vdev=event_octeontx --\
--test=perf_atq --plcores=2 --wlcore=3 --stlist=p --nb_pkts=1000000000
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This is a performance test case that aims at testing the following:
1. Measure the number of events can be processed in a second.
2. Measure the latency to forward an event.
The perf queue test configures the eventdev with Q queues and P ports,
where Q is nb_producers * nb_stages and P is nb_workers + nb_producers.
The user can choose the number of workers, the number of producers and
number of stages through the --wlcores , --plcores and the --stlist
application command line arguments respectively.
The producer(s) injects the events to eventdev based the
first stage sched type list requested by the user through --stlist
the command line argument.
Based on the number of stages to process(selected through --stlist),
the application forwards the event to next upstream queue and
terminates when it reaches the last stage in the pipeline.
On event termination, application increments the number events
processed and print periodically in one second to get the
number of events processed in one second.
When --fwd_latency command line option selected, the application
inserts the timestamp in the event on the first stage and then
on termination, it updates the number of cycles to forward
a packet. The application uses this value to compute the average
latency to a forward packet.
Example command to run perf queue test:
sudo build/app/dpdk-test-eventdev --vdev=event_sw0 -- --test=perf_queue\
--slcore=1 --plcores=2 --wlcore=3 --stlist=p --nb_pkts=1000000000
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The event producer and master lcore's test termination and
the logic to print the mpps and latency are common for the
queue and all types queue test.
Move them as the common function.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Setup one port per worker and link to all queues and setup
N producer ports to inject the events.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
add functions to create mempool, destroy mempool and print the test result.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
perf test has the queue and all types queue variants.
Introduce test_perf_common* to share the common code between those tests.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This test verifies the same aspects of order_queue test,
The difference is the number of queues used, this test
operates on a single "all types queue"(atq) instead of two
different queues for ordered and atomic.
Example command to run order all types queue test:
sudo build/app/dpdk-test-eventdev --vdev=event_octeontx --\
--test=order_atq --plcores 1 --wlcores 2,3
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The order queue test configures the eventdev with two queues
and an event producer to inject the events to q0(ordered) queue.
Both q0(ordered) and q1(atomic) are linked to all the workers.
The event producer maintains a sequence number per flow and
injects the events to the ordered queue.
The worker receives the events from ordered queue and
forwards to atomic queue. Since the events from an ordered queue can
be processed in parallel on the different workers, the
ingress order of events might have changed on the downsteam
atomic queue enqueue. On enqueue to the atomic queue, the eventdev PMD
driver reorders the event to the original ingress order
i.e producer ingress order).
When the event is dequeued from the atomic queue by the worker,
this test verifies the expected
sequence number of associated event per flow by comparing
the free running expected sequence number per flow.
Example command to run order queue test:
sudo build/app/dpdk-test-eventdev --vdev=event_sw0 --\
--test=order_queue --plcores 1 --wlcores 2,3
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The event producer and master lcore's test end and
failure detection logic are common for the queue and
all types queue test.Move them as the common function.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Setup one port per worker and link to all queues and setup
one producer port to inject the events.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
add functions to create mempool, destroy mempool,
dump the options, check the options and print the test result.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
order test has the queue and all types queue variants. Introduce
test_order_common* to share the common code between those tests.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch retrieves the test ops from the given test case name and
invokes the registered test ops callbacks in order and
print the test result.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add an infrastructure for updating the options through
application specific command line arguments.
Signed-off-by: Guduri Prathyusha <gprathyusha@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Guduri Prathyusha <gprathyusha@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Guduri Prathyusha <gprathyusha@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Define the test options that used across all test cases and
fill the default values for the same.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Guduri Prathyusha <gprathyusha@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
adding common helper functions that used in test framework and
in all the test cases.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Guduri Prathyusha <gprathyusha@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add a couple of help functions that will allow parsing many types of
input parameters, i.e.: bool, 16, 32, 64 bits, hex and list of cores etc.
Derived from examples/ip_pipeline/parser.h
Signed-off-by: Guduri Prathyusha <gprathyusha@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
adding routines to register and retrieve eventdev test cases.
The RTE_INIT based constructor approach has been taken to simplify the test
case registration.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
In order to extend the test framework to realize different use cases,
The ops with function pointer callback scheme has been chosen.
This patch defines the callbacks for each test case.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The dpdk-test-eventdev tool is a Data Plane Development Kit (DPDK)
application that allows exercising various eventdev use cases. This
application has a generic framework to add new eventdev based test cases
to verify functionality and measure the performance parameters of DPDK
eventdev devices.
This patch adds the skeleton of the dpdk-test-eventdev application.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
After test is finished the main thread waits only for lcores
where runners were started because, in case of using the
multicore scheduler, more cores are launched that do not need
to be waited for.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The session mempool pointer is needed in each queue pair,
if session-less operations are being handled.
Therefore, the API is changed to accept this parameter,
as the session mempool is created outside the
device configuration function, similar to what ethdev
does with the rx queues.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Change crypto device's session management to make it
device independent and simplify architecture when session
is intended to be used on more than one device.
Sessions private data is agnostic to underlying device
by adding an indirection in the sessions private data
using the crypto driver identifier.
A single session can contain indirections to multiple device types.
New function rte_cryptodev_sym_session_init has been created,
to initialize the driver private session data per driver to be
used on a same session, and rte_cryptodev_sym_session_clear
to clear this data before calling rte_cryptodev_sym_session_free.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Instead of creating the session mempool while configuring
the crypto device, apps will create the mempool themselves.
This way, it gives flexibility to the user to have a single
mempool for all devices (as long as the objects are big
enough to contain the biggest private session size) or
separate mempools for different drivers.
Also, since the mempool is now created outside the
device configuration function, now it needs to be passed
through this function, which will be eventually passed
when setting up the queue pairs, as ethernet devices do.
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Now that AAD is only used in AEAD algorithms,
there is no need to keep AAD in the authentication
structure.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Since there is a new operation type (AEAD), add parameters
for this in the application.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
AES-GMAC is an authentication algorithm, based on AES-GCM
without encryption. To simplify its usage, now it can be used
setting the authentication parameters, without requiring
to concatenate a ciphering transform.
Therefore, it is not required to set AAD, but authentication
data length and offset, giving the user the option
to have Scatter-Gather List in the input buffer,
as long as the driver supports it.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Digest length was duplicated in the authentication transform
and the crypto operation structures.
Since digest length is not expected to change in a same
session, it is removed from the crypto operation.
Also, the length has been shrunk to 16 bits,
which should be sufficient for any digest.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Additional authenticated data (AAD) information was duplicated
in the authentication transform and in the crypto
operation structures.
Since AAD length is not meant to be changed in a same session,
it is removed from the crypto operation structure.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
For wireless algorithms (SNOW3G, KASUMI, ZUC),
the IV for the authentication algorithms (F9, UIA2 and EIA3)
was taken from the AAD parameter, as there was no IV parameter
in the authentication structure.
Now that IV is available for all algorithms, there is need
to keep doing this, so AAD is not used for these algorithms
anymore.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Authentication algorithms, such as AES-GMAC or the wireless
algorithms (like SNOW3G) use IV, like cipher algorithms.
So far, AES-GMAC has used the IV from the cipher structure,
and the wireless algorithms have used the AAD field,
which is not technically correct.
Therefore, authentication IV parameters have been added,
so API is more correct. Like cipher IV, auth IV is expected
to be copied after the crypto operation.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Since IV parameters (offset and length) should not
change for operations in the same session, these parameters
are moved to the crypto transform structure, so they will
be stored in the sessions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Since IV now is copied after the crypto operation, in
its private size, IV can be passed only with offset
and length.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Usually, IV will change for each crypto operation.
Therefore, instead of pointing at the same location,
IV is copied after each crypto operation.
This will let the IV to be passed as an offset from
the beginning of the crypto operation, instead of
a pointer.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Storing a pointer to the user data is unnecessary,
since user can store additional data, after the crypto operation.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Use rte_mempool_put_bulk for both latency and throughput tests instead
of rte_crypto_op_free to improve application performance.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Add new command to support enable/disable of dedicated Tx/Rx queue on
each slave of a bond device for LACP control plane traffic.
set bonding lacp dedicated_queues <port_id> [enable|disable]
When enabled this option creates dedicated queues on each slave device
for LACP control plane traffic. This removes the need to filter control
plane packets in the data path.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
New command 'ddp del (port) (profile_path)' removes previously
loaded profile and deletes it from the list of the loaded profiles.
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch demonstrates how to get information about dynamic device
personalization (DDP) profile.
Command 'ddp get info (path_to_profile)' extracts and prints
information about the given profile.
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add parameter to print port statistics periodically
(disabled by default), if interactive mode is not enabled.
This is useful to allow the user to see port statistics
without having to get into the internal command line.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add parameter to start forwarding sending first
a burst of packets, which is useful when testing
a loopback connection.
This was already implemented as an internal command,
but adding it as a parameter is interesting, as it
allows the user to test a loopback connection without
entering in the internal command line.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add new meta pattern item RTE_FLOW_TYPE_ITEM_FUZZY in flow API.
This is for device that support fuzzy match option.
Usually a fuzzy match is fast but the cost is accuracy.
i.e. Signature Match only match pattern's hash value, but it is
possible that two different patterns have the same hash value.
Matching accuracy level can be configured by subfield threshold.
Driver can divide the range of threshold and map to different
accuracy levels that device support.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
This is changing the API of rte_eal_dev_detach().
Signed-off-by: Jan Blunck <jblunck@infradead.org>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Because the comments in function cmd_add_bonding_slave_parsed() and
cmd_remove_bonding_slave_parsed() is 'Set the primary slave for
a bonded device',so fix it with 'add the slave for a bonded device'
and 'remove the slave from a bonded device'.
Signed-off-by: RongQiang Xie <xie.rongqiang@zte.com.cn>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Change the rte_eth_dev_callback_process function to return int,
and add a void *ret_param parameter.
The new parameter is used by ixgbe and i40e instead of abusing
the user data of the callback.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
These functions are supported only on ixgbe.
However, they should appear in the help and returns an error
if the function is not supported or not enabled.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
When ixgbe bypass is not explicitly disabled while ixgbe is disabled:
app/test-pmd/testpmd.c:304:27: error:
‘RTE_PMD_IXGBE_BYPASS_TMT_OFF’ undeclared here
The ixgbe bypass feature is meaningful only if ixgbe is enabled.
So we need to check both.
A best fix will be to enable bypass always and remove this option.
Fixes: e261265e42 ("ethdev: move bypass functions to ixgbe PMD")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
cmd_set_vf_rxmode_parsed() was defined only in the build context
of RTE_LIBRTE_IXGBE_PMD:
app/test-pmd/cmdline.c:13817:27: error: ‘cmd_set_vf_rxmode’ undeclared here
Fixes: 4cfe399f65 ("net/bnxt: support to set VF rxmode")
Reported-by: Yongseok Koh <yskoh@mellanox.com>
Reported-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Fixing typos across dpdk source code using codespell utility.
Skipped the ethdev driver's base code fixes to keep the base
code intact.
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Isolated mode can be requested by applications on individual ports to avoid
ingress traffic outside of the flow rules they define.
Besides making ingress more deterministic, it allows PMDs to safely reuse
resources otherwise assigned to handle the remaining traffic, such as
global RSS configuration settings, VLAN filters, MAC address entries,
legacy filter API rules and so on in order to expand the set of possible
flow rule types.
To minimize code complexity, PMDs implementing this mode may provide
partial (or even no) support for flow rules when not enabled (e.g. no
priorities, no RSS action). Applications written to use the flow API are
therefore encouraged to enable it.
Once effective, leaving isolated mode may not be possible depending on PMD
implementation.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch adds support to configure the VF L2 Rx settings.
The per VF setting is maintained in bnxt_child_vf_info.l2_rx_mask
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds code to insert a default VF VLAN.
Also track the current default VLAN per vnic for the VF.
When setting the default VLAN, avoid setting it to the current value.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds code to get and clear VF stats.
It also adds the necessary HWRM structures to send the command
to the firmware.
Signed-off-by: Stephen Hurd <stephen.hurd@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
This patch adds support to
1) enable VF MAC anti spoof.
2) QOS configuration for specified VF.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Add functions rte_pmd_bnxt_set_tx_loopback,
rte_pmd_bnxt_set_all_queues_drop_en and
rte_pmd_bnxt_set_vf_mac_addr to configure tx_loopback,
queue_drop and VF MAC address setting in the hardware.
It also adds the necessary functions to send the HWRM commands
to the firmware.
Signed-off-by: Steeven Li <steeven.li@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Move all bypass functions to ixgbe pmd and remove function
pointers from the eth_dev_ops struct.
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This commit adds TCP flags support in flow API as
some drivers have SYN filter.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Application fails to create NVGRE and E-Tag flows with
current configuration, this commit fixes the issue by
adding flow items for E_TAG and NVGRE.
Fixes: e4840ef268 ("ethdev: fix incomplete items in flow API")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Coverity reported that an argument for sizeof was used improperly.
We should allocate memory for value size that pointer points to,
instead of pointer size itself.
Coverity issue: 144523, 144521
Fixes: 7ac16a3660 ("app/proc-info: support xstats by ID and by name")
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Adds the "all" option to the print-event and mask-event parameters. This
option will enable or disable all event notifications from being
displayed.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The test assumes the socket ids are contiguous. This
is not necessarily the case on all servers and may cause
mempool creation to fail.
Fixing it by detecting the list of valid socket ids and
use it for the mempool creation.
Fixes: 7acf894d07 ("app/testpmd: detect numa socket count")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add two parameters to testpmd:
--print-event <event name>
--mask-event <event name>
To enable or disable to printing of events. This display is configured
on a per-event basis. By default, all except VF_MBOX are displayed.
Fixes: 76ad4a2d82 ("app/testpmd: add generic event handler")
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Previous numa_support = 0 by default, it need to add --numa to testpmd
command line to enable numa, so port_numa and ring_numa were initialized
at function launch_args_parse(), now testpmd change numa_support = 1 as
default, so port_numa and ring_numa also need to initialize by default,
otherwise port->socket_id will be probed to wrong value.
Fixes: 999b2ee0fe ("app/testpmd: enable NUMA support by default")
Signed-off-by: Yulong Pei <yulong.pei@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
MAC addresses are implicitly handled in network order since they are
actually byte strings, however this is not properly enforced with MAC masks
provided as prefix lengths, which end up inverted on little endian
systems.
Fixes: 6df81b325f ("app/testpmd: add items eth/vlan to flow command")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The parameter type parser function stores a stack-local address in the
global parser context when parsing a "prefix" keyword.
This usually translates to "Bad arguments" errors even for correct flow
rules as stack gets overwritten by subsequent function calls.
Fixes: d3f61b7bad ("app/testpmd: add flow item spec prefix length")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Disable latency stats gathering by default,
so there is not performance degradation if user
is not interested in them.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This fixes compiler warnings with GCC 7.
Fixes: 28d62131a1 ("app/testpmd: extend flow director input set commands")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The PCI code will move to the bus drivers directory.
Rename functions from rte_eal_pci_ to rte_pci_
to prepare the move of the driver out of EAL.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
There are new arguments --xstats-ids and --xstats-name
in proc_info command line to retrieve statistics given by ids
and by name.
E.g. --xstats-ids="1,3,5,7,8"
E.g. --xstats-name rx_errors
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Revert patches to provide clear view for
upcoming changes. Reverted patches are listed below:
commit ea85e7d711 ("ethdev: retrieve xstats by ID")
commit a954495245 ("ethdev: get xstats ID by name")
commit 1223608adb ("app/proc-info: support xstats by ID")
commit 25e38f09af ("net/e1000: support xstats by ID")
commit 923419333f ("net/ixgbe: support xstats by ID")
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Adds support to testpmd to load a set of cmdline CLI commands at runtime.
This can be helpful when needing to cut-n-paste many commands where
cut-n-paste may not be practical.
testpmd> load /home/ubuntu/somefile.txt
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Adds support to testpmd to load a set of cmdline CLI commands at startup.
This can be helpful when needing to cut-n-paste many commands each time
testpmd is restarted. This option will work in both interactive and
non-interactive modes.
./testpmd -n4 -c3 ... -- --cmdline-file=/home/ubuntu/somefile.txt
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Bit-rate collation should only be done by one core. This patch adds
an option to select which core performs the bit-rate calculation,
which is also disabled by default.
Fixes: 7e4441c8ef ("app/testpmd: add bitrate statistics calculation")
Signed-off-by: Remy Horton <remy.horton@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
When testpmd exits, it frees the acquired resources (e.g. stop ports).
However, when we terminate it by Ctrl-d, testpmd exits directly without
releasing the resources. In this patch, we fix this exit issue.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
Since
commit 999b2ee0fe ("app/testpmd: enable NUMA support by default"),
testpmd is started with numa enabled by default. This highlights a
floating point exception when started with --total-num-mbufs without any
port (division by 0). This bug was already triggered before this commit
if the --no-numa option was given.
This commit adds a check of the nb_ports value before doing the
division. By looking at this code, it appears that the creation of the
mbuf pool is not consistent for the number of mbufs depending on the
configuration. This is fixed in the next commit.
Fixes: b6ea6408fb ("ethdev: store numa_node per device")
Cc: stable@dpdk.org
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
E-Tag and NVGRE pattern items have been added hastily without updating
documentation nor testpmd.
This commit also adds default masks for these items based on the ixgbe
implementation.
Fixes: 99e7003831 ("net/ixgbe: parse L2 tunnel filter")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
fix proc-info xstats-name description string
Fixes: 1223608adb ("app/proc-info: support xstats by ID")
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
There is little reason for NUMA support in testpmd to be off by default, so
enable it, and add in a new commandline parameter to disable it, if that is
wanted by users.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Enable device removal event for PMD supporting it.
Add the --no-rmv-interrupt parameter to explicitly disable it.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Signed-off-by: Elad Persiko <eladpe@mellanox.com>
For drivers supporting the LSC event, enable it.
This allows to test LSC event support.
Add the --no-lsc-interrupt parameter to explicitly disable the link status
change interrupt.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
This is a rather simple handler that prints a message with the name of
the current event. It can be used to check PMD callback registration and
triggers.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
There is a new argument --xstats-ids and --xstats-name
in proc_info command line to retrieve statistics given by ids
and by name.
E.g. --xstats-ids="1,3,5,7,8"
E.g. --xstats-name rx_errors
ethdev: mark functions as deprecated
Functions rte_eth_xstats_get_all and rte_eth_xstats_get_names_all
are marked as deprecated
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Extended xstats API in ethdev library to allow grouping of stats
logically so they can be retrieved per logical grouping managed
by the application.
Changed existing functions rte_eth_xstats_get_names and
rte_eth_xstats_get to use a new list of arguments: array of ids
and array of values. ABI versioning mechanism was used to
support backward compatibility.
Introduced two new functions rte_eth_xstats_get_all and
rte_eth_xstats_get_names_all which keeps functionality of the
previous ones (respectively rte_eth_xstats_get and
rte_eth_xstats_get_names) but use new API inside.
test-pmd: add support for new xstats API retrieving by id in
testpmd application: xstats_get() and
xstats_get_names() call with modified parameters.
doc: add description for modified xstats API
Documentation change for modified extended statistics API functions.
The old API only allows retrieval of *all* of the NIC statistics
at once. Given this requires a MMIO read PCI transaction per statistic
it is an inefficient way of retrieving just a few key statistics.
Often a monitoring agent only has an interest in a few key statistics,
and the old API forces wasting CPU time and PCIe bandwidth in retrieving
*all* statistics; even those that the application didn't explicitly
show an interest in.
The new, more flexible API allow retrieval of statistics per ID.
If a PMD wishes, it can be implemented to read just the required
NIC registers. As a result, the monitoring application no longer wastes
PCIe bandwidth and CPU time.
Signed-off-by: Jacek Piasecki <jacekx.piasecki@intel.com>
Signed-off-by: Kuba Kozak <kubax.kozak@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
For AEAD algorithms, additional authenticated data (AAD)
can be passed, but it is optional, so its size can be zero.
Therefore, test can be run if no memory is allocated.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
When SNOW3G/KASUMI/ZUC algorithms are used, ciphering
and authentication lengths have to be passed as bits
and not as bytes.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch fixes the crypto operation resubmission problem in crypto
perferformance test. Originally, when needed crypto ops amount is
smaller than the enqueued crypto ops in the last round, one or more
processed crypto operations will be re-enqueued.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
In the latency test, when number of enqueued operations
is less than the burst size, the timestamp value of the
non-enqueued operations was being stored, even though
those operations were being freed.
This could cause an array overflow, since it could store
more values than the total number of operations.
Fixes: 5d75fb09d3 ("app/crypto-perf: fix invalid latency for QAT")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
When ipv6 packet is tunnel packet, "PKT_TX_OUTER_IPV6" flag must
be set, to let prepare the correct mbuf meta data for tx forward.
Fixes: 2b76648872 ("net/e1000: add Tx preparation")
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Since VF can not disable/enable HW CRC strip for non-DPDK PF drivers,
and kernel driver almost default enable that feature, if disable it in
app's rxmode, VF driver will report the VF launch failure. So this
patch default to enable HW CRC strip to let VF launch successful.
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This fixes build in following configuration:
CONFIG_RTE_LIBRTE_CRYPTODEV=n
CONFIG_RTE_APP_CRYPTO_PERF=y
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reorganize options structure, to have all the parameters
used in a single run in the first bytes of the structure,
so all fit in a single cache line.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
When using the verify test, test name is necessary
to be passed when digest is needed.
Also, when using an block cipher algorithm (CBC, ECB),
the buffer size has to be aligned to the block size.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
So far, the crypto performance application was only able to
test one buffer size and one burst size.
With this commit, multiple sizes can be passed, either as a range
of values or as a list of values.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Instead of printing the test results in the destructor
function, print them just after each run.
This will be useful for after the commit that allows
a range of buffer and burst sizes.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
When testing cipher only operations, there is no need to append digest
at the end of the buffer.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
In order to simplify throughput and latency tests,
verify option has been removed from these and moved
as a separate test.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Ciphertext and digests for different buffer sizes
were incorrect.
Fixes: 5f1d85c5a8 ("app/crypto-perf: add test vectors files")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Cyclecount test was not implemented, so it is removed.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Some values are uninitialized for "cipher null" and "auth null"
operations. It may cause unpredictable results for some crypto pmd
drivers, or even segmentation fault.
This patch sets values for null operations to zero.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
When somebody use bad --optype with aead algorithms
segmentation fault could happen.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fixes invalid latency result when using the performance application and
hardware QAT PMD. It occurred when the number of processed packets was
higher then the size of the internal QAT PMD ring buffer and the buffer
was overflowed.
Fixed by correcting the registration of the enqueued packets and freeing
memory space for not enqueued packets.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Instead of going through the array of supported algorithms
in the app, to get the algorithm enum, use the new API in
cryptodev to parse this string, so it is not necessary to add
a new supported algorithm in the cryptodev library and this app.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds latency stats commandline argument to testpmd,
allowing to specify the lcore to use for latencystats updates.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
Calculate bitrate statistics using the bitrate stats library. The
resulting statistics can be viewed via proc_info.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Modify the dpdk-procinfo process to display the newly added metrics.
Added new command line option "--metrics" to display metrics.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
Change the size of m->port and m->nb_segs to 16 bits. It is now possible
to reference a port identifier larger than 256 and have a mbuf chain
larger than 256 segments.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
This patch adds MTU display to "show port info" command.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Add a CLI in testpmd to test the TC min bandwidth
setting.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In rte_eth_check_reta_mask(), it is required to align the size of the RETA
table to RTE_RETA_GROUP_SIZE but as the size can be less than the limit,
this should be removed. The change is also applied to a command of testpmd.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
This patch exposes the following item fields through the flow command:
- MPLS label
- GRE protocol
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch is to add testpmd CLI for getting all loaded DDP profiles.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add a CLI to set some TCs' strict link priority mode
on a physical port.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add CLI to set a specific TC's max bandwidth
on a specific VF from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add CLI to set TCs' min bandwidth on a specific VF
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add CLI to set a specific VF's TX max bandwidth
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Fix the UP and TC mapping to divide multiple UPs to TCs instead of mapping
the UPs who are lager than num_tcs to TC0.
Fixes: 1a572499be ("app/testpmd: setup DCB forwarding based on traffic class")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
In SRIOV mode, the mq_mode of rte_eth_rxmode should not carry VMDQ info
without rx_adv_conf setting.
Fixes: a30979f6ad ("app/testpmd: set Rx VMDq RSS mode")
Cc: stable@dpdk.org
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Add an extra parameter to the ring dequeue burst/bulk functions so that
those functions can optionally return the amount of remaining objs in the
ring. This information can be used by applications in a number of ways,
for instance, with single-consumer queues, it provides a max
dequeue size which is guaranteed to work.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Before this patch, the management of dependencies between directories
had several issues:
- the generation of .depdirs, done at configuration is slow: it can take
more than one minute on some slow targets (usually ~10s on a standard
PC without -j).
- for instance, it is possible to express a dependency like:
- app/foo depends on lib/librte_foo
- and lib/librte_foo depends on app/bar
But this won't work because the directories are traversed with a
depth-first algorithm, so we have to choose between doing 'app' before
or after 'lib'.
- the script depdirs-rule.sh is too complex.
- we cannot use "make -d" for debug, because the output of make is used for
the generation of .depdirs.
This patch moves the DEPDIRS-* variables in the upper Makefile, making
the dependencies much easier to calculate. A DEPDIRS variable is still
used to process library dependencies in LDLIBS.
After this commit, "make config" is almost immediate.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Tested-by: Robin Jarry <robin.jarry@6wind.com>
Tested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Extended proc-info application to send DPDK port statistics to
STDOUT in the format expected by collectd exec plugin. Added
HOST ID option to identify the host DPDK process is running on
when multiple instance of DPDK are running in parallel. This is
needed for the barometer project in OPNFV.
Signed-off-by: Roman Korynkevych <romanx.korynkevych@intel.com>
Reviewed-by: Maryam Tahhan <maryam.tahhan@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
RTE_RING_SZ_MASK is redefined here with the original definition in
rte_ring.h. Since rte_ring.h is already included, just remove the
duplicate definition here.
Fixes: caa7028276 ("app/pdump: add tool for packet capturing")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This is to logically group unit tests into their own folder,
separating them from "app" folder.
Hopefully this will make the unit test in DPDK more visible.
Following binaries moved to "test" folder:
cmdline-test
test-acl
test-pipeline
test <-- various DPDK unit tests
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Dereferencing a pointer that might be null key_token when calling strstr.
Check if the pointer is null before.
Coverity issue: 141071
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This commit fixes problem of passing a pointer to sizeof() function.
Now the size of enabled_cdevs structure is passed by RTE_CRYPTO_MAX_DEVS.
Coverity issue: 141068
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Signed-off-by: Jacek Piasecki <jacekx.piasecki@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This commit fixes segmentation fault that happens when
using KASUMI, SNOW3G or ZUC authentication algorithms,
as they need authentication keys and was not being set.
It also set value of authentication key to cipher key
when using GMAC algorithm.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This commit ixes problem with uninitialized nb_cryptodevs variable by
initialize it with 0 value. Program could jump to err label
without running cperf_initialize_cryptodev() function. Also assign 0
value to nb_cryptodevs after cperf_initialize_cryptodev() when value is
negative.
Coverity issue: 141073
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Signed-off-by: Aleksander Gajewski <aleksanderx.gajewski@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
