Enable RSS on IPv4 fragmented packets and IPv6 packets with extension
headers based on 2-tuple hash.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add ops to set link up and down for both PF and VF. If wait_to_complete
is set, poll for link update for up to 10 seconds max.
Original work by Surendra Mobiya <surendra@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add action to redirect matched packets to specified egress physical
port without sending them to host.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add support to match packets based on ingress physical port.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add interface to enable hit counters for flows offloaded in HASH
region.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add interface to delete offloaded flows in HASH region. Use the
hash index saved during insertion to delete the corresponding flow.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add interface to offload flows to HASH region. Translate internal
filter specification to requests to offload flows to HASH region.
Save the returned hash index of the offloaded flow for deletion later.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
CLIP region holds destination IPv6 addresses to be matched for
corresponding flows. Query firmware for CLIP resources and allocate
table to manage them. Also update LE-TCAM to use CLIP to reduce
number of slots needed to offload IPv6 flows.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Fetch supported match items in HASH region. Ensure the mask
is all set for all the supported match items to be offloaded
to HASH region. Otherwise, offload them to LE-TCAM region.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Fetch available HASH filter resources and allocate table for managing
them. Currently only supported on Chelsio T6 family of NICs.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
DEV_RX_OFFLOAD_KEEP_CRC offload flag is added. PMDs that support
keeping CRC should advertise this offload capability.
DEV_RX_OFFLOAD_CRC_STRIP flag will remain one more release
default behavior in PMDs are to keep the CRC until this flag removed
Until DEV_RX_OFFLOAD_CRC_STRIP flag is removed:
- Setting both KEEP_CRC & CRC_STRIP is INVALID
- Setting only CRC_STRIP PMD should strip the CRC
- Setting only KEEP_CRC PMD should keep the CRC
- Not setting both PMD should keep the CRC
A helper function rte_eth_dev_is_keep_crc() has been added to be able to
change the no flag behavior with minimal changes in PMDs.
The PMDs that doesn't report the DEV_RX_OFFLOAD_KEEP_CRC offload can
remove rte_eth_dev_is_keep_crc() checks next release, related code
commented to help the maintenance task.
And DEV_RX_OFFLOAD_CRC_STRIP has been added to virtual drivers since
they don't use CRC at all, when an application requires this offload
virtual PMDs should not return error.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add API to flush all the filters under specified port.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add API to query filter hit and byte counts from hardware.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add API to construct delete filter work request to remove filter
at specified index in LE-TCAM (maskfull) region.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Define filter work request API used to construct filter operations
to be communicated with firmware. These requests are sent via
control queue and completions come asynchronously in firmware event
queue.
Implement flow create operation to create filters in LE-TCAM
(maskfull) region at specified index.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add control queue to communicate filter creation/deletion requests
with firmware. This API will be used by subsequent patches.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Introduce rte_flow skeleton and implement validate operation.
Parse and convert <item>, <action>, <attributes> into hardware
specification. Perform validation, including basic sanity tests
and underlying device's supported filter capability checks.
Currently add support for:
<item>: IPv4, IPv6, TCP, and UDP.
<action>: Drop, Queue, and Count.
Also add sanity checks to ensure filters are created at specified
index in LE-TCAM region. The index in LE-TCAM region indicates
the filter rule's priority with index 0 having the highest priority.
If no index is specified, filters are created at closest available
free index.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Fetch available filter resources from firmware and allocate table for
book-keeping and managing filters in hardware. Also define the hardware
filter specification (ch_filter_specification) used to describe each
filter rule.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add force_link_up devargs to always force link as up for VFs.
This enables VFs on the same NIC to send traffic to each other
even when physical link is down.
Also add RTE_PMD_REGISTER_PARAM_STRING to export all supported
devargs.
Fixes: 011ebc236d ("net/cxgbe: add skeleton VF driver")
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Move freeing up resources from dev_close() to dev_uninit(). This fixes
NULL pointer de-reference when accessing adapter context needed by
other ports under same PF, but had been freed up by the first port.
This can happen if only the first port is started up and the check
to free up all resources is still satisfied. When dev_close is
called for other ports, adapter context is NULL since it was freed
up by the first port.
Thus, by moving to dev_uninit() all the ports can be teared down
safely without need for extra checks.
Fixes: 2195df6d11 ("net/cxgbe: rework ethdev device allocation")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
A new hook function is added and called inside the PMDs at the end
of the device probing:
- in primary process, after allocating, init and config
- in secondary process, after attaching and local init
This new function is almost empty for now.
It will be used later to add some post-initialization processing.
For the PMDs calling the helpers rte_eth_dev_create() or
rte_eth_dev_pci_generic_probe(), the hook rte_eth_dev_probing_finish()
is called from here, and not in the PMD itself.
Note that the helper rte_eth_dev_create() could be used more,
especially for vdevs, avoiding some code duplication in PMDs.
Cc: stable@dpdk.org
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
This patch check if a input requested offloading is valid or not.
Any reuqested offloading must be supported in the device capabilities.
Any offloading is disabled by default if it is not set in the parameter
dev_conf->[rt]xmode.offloads to rte_eth_dev_configure() and
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If any offloading is enabled in rte_eth_dev_configure() by application,
it is enabled on all queues no matter whether it is per-queue or
per-port type and no matter whether it is set or cleared in
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If a per-queue offloading hasn't be enabled in rte_eth_dev_configure(),
it can be enabled or disabled for individual queue in
ret_eth_[rt]x_queue_setup().
A new added offloading is the one which hasn't been enabled in
rte_eth_dev_configure() and is reuqested to be enabled in
rte_eth_[rt]x_queue_setup(), it must be per-queue type,
otherwise trigger an error log.
The underlying PMD must be aware that the requested offloadings
to PMD specific queue_setup() function only carries those
new added offloadings of per-queue type.
This patch can make above such checking in a common way in rte_ethdev
layer to avoid same checking in underlying PMD.
This patch assumes that all PMDs in 18.05-rc2 have already
converted to offload API defined in 17.11 . It also assumes
that all PMDs can return correct offloading capabilities
in rte_eth_dev_infos_get().
In the beginning of [rt]x_queue_setup() of underlying PMD,
add offloads = [rt]xconf->offloads |
dev->data->dev_conf.[rt]xmode.offloads; to keep same as offload API
defined in 17.11 to avoid upper application broken due to offload
API change.
PMD can use the info that input [rt]xconf->offloads only carry
the new added per-queue offloads to do some optimization or some
code change on base of this patch.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
We introduced private rte_eth_dev_data to allow vdev to be created
both in primary process and secondary process(es). This is not
friendly to multi-process model, for example, it leads to port id
contention issue if two processes both find the data entry is free.
And to get stats of primary vdev in secondary, we must allocate
from the pre-defined array so that we can find it.
Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
With icc (ICC) 18.0.1 20171018, -wd usage generates following warning:
icc: command line remark #10010: option '-wd3656' is deprecated and will
be removed in a future release. See '-help deprecated'
"icc -help deprecated" output is:
-wd use -diag-disable
Based on above information "-wd" converted to "-diag-disable"
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Change the prototype and the behavior of dev_ops->eth_mac_addr_set(): a
return code is added to notify the caller (librte_ether) if an error
occurred in the PMD.
The new default MAC address is now copied in dev->data->mac_addrs[0]
only if the operation is successful.
The patch also updates all the PMDs accordingly.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Public struct rte_eth_dev_info has a "struct rte_pci_device" field in it
although it is common for all ethdev in all buses.
Replacing pci specific struct with generic device struct and updating
places that are using pci device in a way to get this information from
generic device.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Update to new Rx/Tx offload API. Always set CRC stripping during
configuration, since it can't be disabled.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
On TX path, add fw_eth_tx_pkt_vm_wr to transmit packets over VF.
Use is_pf4() to correctly calculate the work request size and
offsets within the work request. On RX path, use pktshift to adjust
data offset within the mbuf.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add probe to initialize VF devices. Separate init/de-init paths
for PF and VF. Do firmware state initialization wrt VF and retrieve
various operational parameters by querying firmware. Finally configure
and initialize ports.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add firmware mailbox communication support for VF. Add is_pf4()
to check if driver is attached to PF4. Use is_pf4() to determine
whether to use PF or VF mailbox communication.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add minimal VF driver. Declare functions common to both PF and VF
functionality in separate header file and import the header file.
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
The new code uses the new 32-bit Port Capabilities exclusively and
only translates to/from the old 16-bit Port Capabilities at the last
point possible when talking to older Firmware.
For the old versus new Firmware issue, we use the new FW_PARAMS_CMD[PFVF,
CAPS32] command to tell the Firmware that we want Asynchronous Port Status
updates to use the new 32-bit version of the Port Information message. If
we get an error, we know we're dealing with older Firmware, and if not,
we'll start getting th new 32-bit Port Capability message formats.
Also, refactor t4_handle_fw_rpl() to handle new 32-bit Port Capability
replies from firmware in t4_handle_get_port_info().
Original work by Surendra Mobiya <surendra@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Update link configuration API to prepare for 32-bit port capability
support. Continue using 16-bit port capability for older firmware.
Original work by Surendra Mobiya <surendra@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Normally, firmware reads various Forward Error Correction parameters
from a Transceiver Module i2c EPROM and uses a couple of IEEE Standards
(802.3bj for 100Gb/s and 802.3by for 25Gb/s) to interpret those
parameters and come up with supported and default FEC settings.
Firmware then sends these FEC parameters to the Host Driver which gives
the Host Administrator an opportunity to change them if necessary in
order to establish a Link with a Switch which may have made a
non-standard FEC decision.
This commit recognizes "auto" as a discrete FEC mode which can be
used to explicitly select the IEEE 802.3 standard based FEC selection.
Original work by Surendra Mobiya <surendra@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Original work by Surendra Mobiya <surendra@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add firmware API for updating RSS hash configuration and key. Move
RSS hash configuration from cxgb4_write_rss() to a separate function
cxgbe_write_rss_conf().
Also, rename cxgb4_write_rss() to cxgbe_write_rss() for consistency.
Original work by Surendra Mobiya <surendra@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Attach to rte_eth_dev devices allocated by Primary process for
Ports other than Port-0 in the secondary process.
Save the Primary rte_eth_dev device eth_dev_data as part of txq
structure needed for tx path.
Fixes: 8318984927 ("cxgbe: add pmd skeleton")
Cc: stable@dpdk.org
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Rework rte_eth_dev allocation for other ports under same PF.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
