In order to save completion resource, use the first completion ring from
PF or VF as the default completion ring for async event & HWRM forward
response handling. Add bnxt_hwrm_set_async_event_cr() to set
async_event_cr for either PF or VF.
Fixes: 7bc8e9a227cc ("net/bnxt: support async link notification")
Signed-off-by: Qingmin Liu <qingmin.liu@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
While configuring RSS, the FW needs to know the rss_hash_mode that needs
to be initialized.
Set hash mode to HWRM_VNIC_RSS_CFG_INPUT_HASH_MODE_FLAGS_DEFAULT
to allow the FW to use the global mode already configured in the device.
Fixes: bcd4bcc4426f ("net/bnxt: configure RSS")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We were initializing Tx and Rx burst functions only for primary
processes. Fixing it in this patch.
Fixes: 88920136688c ("net/bnxt: support xstats get by id")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The FALLTHROUGH comment for cascading switch cases was missing in
a few places. This patch adds that.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Wrong index used to select descriptor number, causing setting up queue
with wrong number of descriptors.
Fixes: d44f8a485f5d ("app/testpmd: enable per queue configure")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Application can provide 0 for ring size to use default values. To not
log zero for that case get configured ring size from device.
Call the rte_eth_rxq_info_get() and rte_eth_txq_info_get() functions
to update the number of rx and tx descriptors.
Fixes: d44f8a485f5d ("app/testpmd: enable per queue configure")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since ConnectX-5, SW parser just complements HW parser. SW parser starts to
engage only if HW parser can't reach a header. For the older devices, HW
parser will not kick in if any of SWP offsets is set. Therefore, all of the
L3 offsets should be set regardless of HW offload. As IPv6 doesn't have
header checksum, the mbuf can't have PKT_TX_[OUTER_]IP_CKSUM if outer or
inner L3 is IPv6.
And if inner packet isn't IP, the inner offsets shouldn't be set.
Fixes: 5f8ba81c4228 ("net/mlx5: support generic tunnel offloading")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Xueming Li <xuemingl@mellanox.com>
Since we move to new offload APIs, IXGBE_SIMPLE_FLAGS is not used.
Fixes: 51215925a32f ("net/ixgbe: convert to new Tx offloads API")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
When the fail-safe device is reconfigured, it attempts to register
again for the sub-devices LSC and RMV events.
Prevent an event registration if it is already done.
Fixes: 598fb8aec6f6 ("net/failsafe: support device removal")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
The fail-safe PMD registers to RMV event for each removable sub-device
port in order to cleanup the sub-device resources and switch the Tx
sub-device directly when it is plugged-out.
During removal time, the fail-safe PMD stops and closes the sub-device
but it doesn't unregister the LSC and RMV callbacks of the sub-device
port.
It can lead the callbacks to be called for a port which is no more
associated with the fail-safe sub-device, because there is not a
guarantee that a sub-device gets the same port ID for each plug-in
process. This port, for example, may belong to another sub-device of a
different fail-safe device.
Unregister the LSC and RMV callbacks for sub-devices which are not
used.
Fixes: 598fb8aec6f6 ("net/failsafe: support device removal")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Since commit 97b2217ae5bc ("net/mlx4: advertise supported RSS hash
functions"), this PMD includes two similar-looking functions that convert
RSS hash fields between Verbs and DPDK formats.
This patch refactors them as a single two-way function and gets rid of
redundant helper macros.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Below commit documents 0 as a value standing for a default set of RSS hash
types, however the mlx4 PMD doesn't interpret it correctly and still uses
its own internal special value for that (-1).
Also, its function prototype was not updated.
Fixes: ac8d22de2394 ("ethdev: flatten RSS configuration in flow API")
Fixes: 1d173da83ef2 ("net/mlx4: fix default RSS hash fields")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Cleanup remain dependency on old rxmode flags since we move to
new offload APIs.
Fixes: c3ac7c5b0b8a ("net/i40e: convert to new Rx offloads API")
Fixes: e0cb96204b71 ("net/i40e: add support for representor ports")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
rte_eth_bond_8023ad_slave_info() wasn't exported in the original work.
Useful to extract information about the current 802.3ad state.
Fixes: 46fb43683679 ("bond: add mode 4")
Cc: stable@dpdk.org
Signed-off-by: Chas Williams <chas3@att.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
The vdev_netvsc driver allows an automatic probe in Hyper-V VM systems
unless it was already specified by the EAL command line.
The detection of a specified NetVSC device is wrongly done by comparing
the vdev_netvsc driver name to all the vdev devices names, including
the suffix device index. Thus, if the user specifies the vdev_netvsc
device by adding an index to the device name, the comparison fails.
Consequently, the vdev_netvsc driver may automatically probe NetVSC
devices, despite the NetVSC device that was specified by the EAL command
line.
Compare the vdev_netvsc driver name to the devices names without the
index.
Fixes: 56252de779a6 ("net/vdev_netvsc: add automatic probing")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Fixes: fbe90cdd776c ("ethdev: add probing finish function")
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Acked-by: John Miller <john.miller@atomicrules.com>
Reviewed-by: Thomas Monjalon <thomas@monjalon.net>
Following error reported by cppcheck:
(error) Shifting signed 32-bit value by 31 bits is
undefined behaviour. The patch fixes it.
Fixes: 8db9e2a1b232 ("i40e: base driver")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This commit fixes a compilation error if EM_PMD is
not defined, bug IGB_PMD is. The root cause of the
issue was that log init variables are declared as
extern in a header file, while the definition of the
variables was in e1000_ethdev.c. Hence, the definitions
were not available if the e1000 PMD is disabled.
To fix this, a new file is added e1000_logs.c, which
matches the e1000_logs.h header. The log variables are
always compiled in, but the PMD logs are only registered
if a PMD is enabled in the configuration. Extra checks
are added in order to avoid duplicate registering.
Fixes: ed5bbb767c3e ("net/e1000: implement dynamic logging")
Cc: stable@dpdk.org
Reported-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Vipin Varghese <vipin.varghese@intel.com>
With the commit af4f09f28294 ("net/mlx5: prefix all functions with mlx5"),
mlx5_xstats_get() is not compliant any longer with the api.
It always returns the caller max entries count while it should return how
many entries it wrote/wanted to write.
Fixes: af4f09f28294 ("net/mlx5: prefix all functions with mlx5")
Signed-off-by: David Marchand <david.marchand@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Change adds extra information on name parameter for API
rte_eth_dev_get_name_by_port and rte_eth_dev_get_port_by_name.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
TAP device is created following its first queue creation. Multiple
queues can be added or removed over time. In Linux terminology those
are file descriptors which are opened or closed over time. As long as
the number of opened file descriptors is positive - TAP device will
appear as a Linux device. In case all queues are released (the
equivalent of all file descriptors being closed) the TAP device will
be removed. This can lead to abnormalities in different scenarios
where the TAP device should exist even if all its queues are released.
In order to make TAP existence independent of its number of queues -
an extra file descriptor is opened on TAP creation and is closed on
TAP closure. Its only purpose is to serve as a keep-alive mechanism
for the TAP device.
Fixes: bf7b7f437b49 ("net/tap: create netdevice during probing")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Like original commit mentioned below, this fix synchronizes flow rule copy
function with testpmd's own implementation following "app/testpmd: fix copy
of raw flow item (revisited)".
It addresses a crash that occurs when feeding a RAW pattern item to
rte_flow_copy(). Besides external applications, two PMDs (bonding and
failsafe) rely on this function internally.
Note the scope of this patch is limited to the RAW pattern item and has no
impact on all others.
Fixes: 972bf3610611 ("ethdev: fix shallow copy of flow API RSS action")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
While previous fix with the same title does address the main issue, root
cause is that proper handling of spec/last/mask was overlooked in the
original patch.
Mask and last fields must be taken into account at all times.
Fixes: d0ad8648b1c5 ("app/testpmd: fix RSS flow action configuration")
Fixes: 67af7ecc52ec ("app/testpmd: fix copy of raw flow item")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add force_link_up devargs to always force link as up for VFs.
This enables VFs on the same NIC to send traffic to each other
even when physical link is down.
Also add RTE_PMD_REGISTER_PARAM_STRING to export all supported
devargs.
Fixes: 011ebc236ddc ("net/cxgbe: add skeleton VF driver")
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
The resetting of stats on a VF involves the setting of an offset
that is subtracted from future calls, rather zeroing of counters.
However doing a stats reset on the port representor was also
adjusting the values forwarded to the VF, which had the effect of
corrupting the VF's counters. The fix is for the port representor
to maintain its own stats offset, so the port representor and VF
maintain independently-resettable counters.
Fixes: e0cb96204b71 ("net/i40e: add support for representor ports")
Signed-off-by: Remy Horton <remy.horton@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
The old ixgbe_vlan_offload_set() is called by
rte_eth_dev_set_vlan_offload() which is meant to config VLAN
strip/filter/extend on all queues.
This old function is also called by rte_eth_dev_start()/ixgbe_dev_start()
which need support per-queue VALN strip on only parts of queues.
So add new function ixgbe_vlan_offload_config() =
old ixgbe_vlan_offload_set().
This new function is called by ixgbe_dev_start() to support VLAN strip
per-queue configuration.
New ixgbe_vlan_offload_set() = codes to align VLAN strip flags on all
queues with port level setting + new ixgbe_vlan_offload_configure().
The 2nd function is called by rte_eth_dev_set_vlan_offload to support
configure VLAN strip on all queues of whole port.
Fixes: 216f78f4d53f ("net/ixgbe: support VLAN strip per queue offloading in PF")
Fixes: 860a94d3c692 ("net/ixgbe: support VLAN strip per queue offloading in VF")
Signed-off-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
There is no need to return failure (-EEXIST) when the requested
filter is already configured.
Fixes: d6cb17535f88 ("net/qede: fix VLAN filters")
Fixes: 77fac1b54fc9 ("net/qede: fix filtering code")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Reduce the verbosity in ecore_pglueb_rbc_attn_handler() while logging
errmsg during HW init. This could happen due to ungraceful exit of
previous driver instance.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
This patch removes unnecessary check in ixgbe_check_mq_mode, which
fixes the DCB configuration issue.
Fixes: 27b609cbd1c6 ("ethdev: move the multi-queue mode check to specific drivers")
Cc: stable@dpdk.org
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
For vdev, just calling rte_eth_dev_close() isn't enough to free all
the resources allocated during device probe, e.g. for virtio-user,
virtio_user_pmd_remove(), i.e. the remove() method of a vdev driver,
needs to be called to unlink the socket file created during device
probe. So this patch calls the rte_eth_dev_detach() for vdev when
quitting testpmd.
vdevs detach on testpmd exit implemented as workaround to fix
a virtio-user issue. The issue was virtio-user cleanup is not
called and existing socket file not cleaned up which will fail
next run.
Added a comment that this workaround should be converted to a proper
cleanup, not something specific to virtio-user, and not something
specific to vdev and testpmd.
Fixes: af75078fece3 ("first public release")
Fixes: bd8f50a45d0f ("net/virtio-user: support server mode")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
eth_dev_last_created_port is used to store port id type and should
be extended to 16bits corresponding to ethdev port id range.
Fixes: f8244c6399d9 ("ethdev: increase port id range")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patch corrects some spelling issues in i40e.rst and clarifies
which controllers and connections are part of the 700 Series.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Handle properly a case where the path (DPDK_PATCH_PATH
or DPDK_MAINTAINER_PATH) is set to point to a directory.
Signed-off-by: Juhamatti Kuusisaari <juhamatti.kuusisaari@coriant.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Update information for blacklist and whitelist options for secondary
process to share same from primary process.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Fix compilation errors on Centos 7.4 when CONFIG_RTE_KNI_KMOD_ETHTOOL
is set to 'y'.
Centos 7.4 needs HAVE_NDO_BRIDGE_GETLINK_FILTER_MASK_VLAN_FILL:
igb_main.c: In function ‘igb_ndo_bridge_getlink’:
igb_main.c:2289:2: error: too few arguments to function
‘ndo_dflt_bridge_getlink’
return ndo_dflt_bridge_getlink(skb, pid, seq, dev, mode, 0, 0, nlflags);
^
Centos 7.4 needs HAVE_VF_VLAN_PROTO and needs to redefine
ndo_set_vf_vlan to .extended.ndo_set_vf_vlan:
igb_main.c:2318:2: error: unknown field ‘ndo_set_vf_vlan’ specified
in initializer
.ndo_set_vf_vlan = igb_ndo_set_vf_vlan,
^
Signed-off-by: Dan Gora <dg@adax.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
rte_event_eth_rx_adapter_create allocates eth_devices for
currently available eth devices. For newly created eth
devices a new instance for rx adapter has to be created.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Nikhil Rao <nikhil.rao@intel.com>
Fix the call to rte_timer_reset_sync() in sw_event_timer_cb(). The
second parameter is the number of ticks, the third is the timer type.
Fixes: 6750b21bd6af ("eventdev: add default software timer adapter")
Signed-off-by: Dan Gora <dg@adax.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Intel's libsso_zuc library has been moved to a
new location, under "Intel Resource & Design Center".
The installation section of this PMD has been updated
to include the new instructions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Intel's libsso_snow3g library has been moved to a
new location, under "Intel Resource & Design Center".
The installation section of this PMD has been updated
to include the new instructions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
Intel's libsso_kasumi library has been moved to a
new location, under "Intel Resource & Design Center".
The installation section of this PMD has been updated
to include the new instructions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Marko Kovacevic <marko.kovacevic@intel.com>
rte_cryptodev_get_header_session_size() and
rte_cryptodev_get_private_session_size() functions are
targeting symmetric sessions.
With the future addition of asymmetric operations,
these functions need to be renamed from *cryptodev_*_session_*
to *cryptodev_sym_*_session_* to be symmetric specific.
The two original functions are marked as deprecated
and will be removed in 18.08, so applications can still
use the functions in 18.05.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Shally Verma <shally.verma@caviumnetworks.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Some feature flags, such as RTE_CRYPTODEV_FF_MBUF_SCATTER_GATHER
are ambiguous. In this case, it is not clear if Scatter Gather lists
are supported in the input buffer and/or output buffer.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Functions rte_cryptodev_queue_pair_start/stop
are not really used in any of the crypto drivers
(they all just return 0 or -ENOTSUP).
Therefore, this API can be deprecated from 18.05
and removed in 18.08.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
