Currently, ACPI and PSTATE modes have lots of code duplication,
confusing logic, and a bunch of other issues that can, and have, led to
various bugs and resource leaks.
This commit factors out the common parts of sysfs reading/writing for
ACPI and PSTATE drivers.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Hunt <david.hunt@intel.com>
Currently, ACPI code uses rte_power_info as the struct name, which
gives the appearance that this is an externally visible API. Fix to
use internal namespace.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Currently, if dev_configure is not called or fails to be called, users
can still call dev_start successfully. So it is necessary to have a flag
which indicates whether the device is configured, to control whether
dev_start can be called and eliminate dependency on user invocation order.
The flag stored in "struct rte_eth_dev_data" is more reasonable than
"enum rte_eth_dev_state". "enum rte_eth_dev_state" is private to the
primary and secondary processes, and can be independently controlled.
However, the secondary process does not make resource allocations and
does not call dev_configure(). These are done by the primary process
and can be obtained or used by the secondary process. So this patch
adds a "dev_configured" flag in "rte_eth_dev_data", like "dev_started".
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
libabigail raised a warning on this change.
This change is fine wrt ABI as far as we understand, but we can't
express an exception rule (see libabigail bug #28060) to waive the
changes only in this part of the rte_eth_dev_data struct.
The solution for now is to globally waive any change on the
rte_eth_dev_data structure.
Signed-off-by: David Marchand <david.marchand@redhat.com>
When calling rte_eal_cleanup, the mp channel cleanup routine only sets
mp_fd to -1 leaving the rte_mp_handle control thread running.
This control thread can spew warnings on reading on an invalid fd.
This is especially noticed with ASAN enabled.
To handle this situation, set mp_fd to -1 to signal the control thread
it should exit, but since this thread might be sleeping on the socket,
cancel the thread too.
Fixes: 85d6815fa6 ("eal: close multi-process socket during cleanup")
Cc: stable@dpdk.org
Reported-by: Owen Hilyard <ohilyard@iol.unh.edu>
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The struct rte_flow_action was missing from DPDK API documentation.
Fixes: 3850cf0c8c ("ethdev: add tunnel encap/decap actions")
Cc: stable@dpdk.org
Signed-off-by: Jan Viktorin <viktorin@cesnet.cz>
Acked-by: Ori Kam <orika@nvidia.com>
Acked-by: Aman Deep Singh <aman.deep.singh@intel.com>
Add clock_gettime() on Windows in rte_os_shim.h.
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Add device event stubs in eal_dev.c for Windows
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Add required macros by testpmd on Windows in rte_os_shim.h
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Enable building libraries that testpmd depends on for Windows
Signed-off-by: Jie Zhou <jizh@linux.microsoft.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Since commit d5df2ae042 ("net: fix unneeded replacement of TCP
checksum 0"), the functions rte_ipv4_udptcp_cksum() and
rte_ipv6_udptcp_cksum() can return either 0x0000 or 0xffff when used to
verify a packet containing a valid checksum.
Since these functions should be used to calculate the checksum to set in
a packet, introduce 2 new helpers for checksum verification. They return
0 if the checksum is valid in the packet.
Use this new helper in net/tap driver.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Introduce an internal firmware loading helper to remove code duplication
in our drivers and handle xz compressed firmware by calling libarchive.
This helper tries to look for .xz suffixes so that drivers are not aware
the firmware has been compressed.
libarchive is set as an optional dependency: without libarchive, a
runtime warning is emitted so that users know there is a compressed
firmware.
Windows implementation is left as an empty stub.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Tested-by: Haiyue Wang <haiyue.wang@intel.com>
If the library fails to create the needed socket, add an additional
check to report if the error is due to a missing DPDK runtime dir.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
Acked-by: Ciara Power <ciara.power@intel.com>
When multi-process is not wanted and DPDK is run with the "no-shconf"
flag, the telemetry library still needs a runtime directory to place the
unix socket for telemetry connections. Therefore, rather than not
creating the directory when this flag is set, we can change the code to
attempt the creation anyway, but not error out if it fails. If it
succeeds, then telemetry will be available, but if it fails, the rest of
DPDK will run without telemetry. This ensures that the "in-memory" flag
will allow DPDK to run even if the whole filesystem is read-only, for
example.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Morten Brørup <mb@smartsharesystems.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Inflight metadata are allocated using glibc's calloc.
This patch converts them to rte_zmalloc_socket to take
care of the NUMA affinity.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
This patch saves the NUMA node the virtqueue is allocated
on at init time, in order to allocate all other data on the
same node.
While most of the data are allocated before numa_realloc()
is called and so the data will be reallocated properly, some
data like the log cache are most likely allocated after.
For the virtio device metadata, we decide to allocate them
on the same node as the VQ 0.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
This patch improves the numa_realloc() function by making use
of rte_realloc_socket(), which takes care of the memory copy
and freeing of the old data.
Suggested-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Since the Vhost-user device initialization has been reworked,
enabling the application to start using the device as soon as
the first queue pair is ready, NUMA reallocation no more
happened on queue pairs other than the first one since
numa_realloc() was returning early if the device was running.
This patch fixes this issue by reallocating the device metadata
only if the device is running. For the virtqueues, a vring state
change notification is sent to notify the application of its
disablement. Since the callback is supposed to be blocking, it
is safe to reallocate it afterwards.
Fixes: d0fcc38f5f ("vhost: improve device readiness notifications")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
When the guest allocates virtqueues on a different NUMA node
than the one the Vhost metadata are allocated, both the Vhost
device struct and the virtqueues struct are reallocated.
However, reallocating the log cache on the new NUMA node was
not done. This patch fixes this by reallocating it if it has
been allocated already, which means a live-migration is
on-going.
Fixes: 1818a63147 ("vhost: move dirty logging cache out of virtqueue")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
When the guest allocates virtqueues on a different NUMA node
than the one the Vhost metadata are allocated, both the Vhost
device struct and the virtqueues struct are reallocated.
However, reallocating the guest pages table was missing, which
likely causes at least one cross-NUMA accesses for every burst
of packets.
This patch reallocates this table on the same NUMA node as the
other metadata.
Fixes: e246896178 ("vhost: get guest/host physical address mappings")
Cc: stable@dpdk.org
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
When the guest allocates virtqueues on a different NUMA node
than the one the Vhost metadata are allocated, both the Vhost
device struct and the virtqueues struct are reallocated.
However, reallocating the Vhost memory table was missing, which
likely causes at least one cross-NUMA accesses for every burst
of packets.
This patch reallocates this table on the same NUMA node as the
other metadata.
Fixes: 552e8fd3d2 ("vhost: simplify memory regions handling")
Cc: stable@dpdk.org
Reported-by: David Marchand <david.marchand@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
Add common devargs key definition for "bus", "class" and "driver".
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
The string copy api rte_strscpy() did not set rte_errno during failures,
instead it just returned negative error number.
Set rte_errrno if the destination buffer is too small.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Xueming Li <xuemingl@nvidia.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Data types Elf32_auxv_t and Elf64_auxv_t are used by OS Linux
auxiliary vector read, and not used by arch specific cpu flag
API implementations. Hence remove them from Arm file.
Reported-by: James Grant <j.grant@qub.ac.uk>
Signed-off-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
ASAN found a stack buffer overflow in lib/rib/rte_rib6.c:get_dir.
The fix for the stack buffer overflow was to make sure depth
was always < 128, since when depth = 128 it caused the index
into the ip address to be 16, which read off the end of the array.
While trying to solve the buffer overflow, I noticed that a few
changes could be made to remove the for loop entirely.
Fixes: f7e861e21c ("rib: support IPv6")
Cc: stable@dpdk.org
Signed-off-by: Owen Hilyard <ohilyard@iol.unh.edu>
Acked-by: Vladimir Medvedkin <vladimir.medvedkin@intel.com>
Rules in a classify table were not freed if the table
had a delete function.
Fixes: be41ac2a33 ("flow_classify: introduce flow classify library")
Cc: stable@dpdk.org
Signed-off-by: Owen Hilyard <ohilyard@iol.unh.edu>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
In kni_allocate_mbufs(), we alloc mbuf for alloc_q as this code.
allocq_free = (kni->alloc_q->read - kni->alloc_q->write - 1) \
& (MAX_MBUF_BURST_NUM - 1);
The value of allocq_free maybe zero, for example :
The ring size is 1024. After init, write = read = 0. Then we fill
kni->alloc_q to full. At this time, write = 1023, read = 0.
Then the kernel send 32 packets to userspace. At this time, write
= 1023, read = 32. And then the userspace receive this 32 packets.
Then fill the kni->alloc_q, (32 - 1023 - 1) & 31 = 0, fill nothing.
...
Then the kernel send 32 packets to userspace. At this time, write
= 1023, read = 992. And then the userspace receive this 32 packets.
Then fill the kni->alloc_q, (992 - 1023 - 1) & 31 = 0, fill nothing.
Then the kernel send 32 packets to userspace. The kni->alloc_q only
has 31 mbufs and will drop one packet.
Absolutely, this is a special scene. Normally, it will fill some
mbufs everytime, but may not enough for the kernel to use.
In this patch, we always keep the kni->alloc_q to full for the kernel
to use.
Fixes: 49da4e82cf ("kni: allocate no more mbuf than empty slots in queue")
Cc: stable@dpdk.org
Signed-off-by: Cheng Liu <liucheng11@huawei.com>
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Same idea as commit a287ac2891 ("vhost: allocate and free packets
in bulk in Tx packed"), allocate and free packets in bulk.
Also remove the unused function virtio_dev_pktmbuf_alloc.
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Use vc_req only after it was checked not to be NULL.
Fixes: 2d962bb736 ("vhost/crypto: fix possible TOCTOU attack")
Cc: stable@dpdk.org
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Interrupt manager in Windows EAL allocates on IOCP and starts
a control thread that runs indefinitely. At DPDK cleanup
this thread was not stopped and IOCP handle was not closed.
Gracefully stop interrupt-handling in rte_eal_cleanup().
The thread already closes IOCP handle before exiting.
Fixes: 5c016fc020 ("eal/windows: add interrupt thread skeleton")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Ranjit Menon <ranjit.menon@intel.com>
Acked-by: Jie Zhou <jizh@microsoft.com>
Tested-by: Jie Zhou <jizh@microsoft.com>
Each time a work was scheduled in the interrupt thread,
usually an alarm, a handle was opened but not closed.
Opening a handle is a system call, which harms alarm precision.
Instead of opening and closing a handle each time, open it
when interrupt thread starts and close it when the thread finishes.
Fixes: 5c016fc020 ("eal/windows: add interrupt thread skeleton")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Tested-by: Pallavi Kadam <pallavi.kadam@intel.com>
Interrupt thread ID retained its value after interrupt thread finish.
Other interrupt routines could then operate on the wrong thread.
Clear interrupt thread ID before thread termination.
Fixes: 5c016fc020 ("eal/windows: add interrupt thread skeleton")
Cc: stable@dpdk.org
Signed-off-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Tyler Retzlaff <roretzla@linux.microsoft.com>
This became visible by backporting the following for the 19.11 stable tree:
c13ca4e8 "vfio: fix DMA mapping granularity for IOVA as VA"
The usage of type bool in the vfio code would require "#include
<stdbool.h>", but rte_vfio.h has no direct paths to stdbool.h.
It happens that in eal_vfio_mp_sync.c it comes after "#include
<rte_log.h>".
And rte_log.h since 20.05 includes stdbool since this change:
241e67bfe "log: add API to check if a logtype can log in a given level"
and thereby mitigates the issue.
It should be safe to include stdbool.h from rte_vfio.h itself
to be present exactly when needed for the struct it defines using that
type.
Fixes: c13ca4e81c ("vfio: fix DMA mapping granularity for IOVA as VA")
Cc: stable@dpdk.org
Signed-off-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
--buildtype=debug with gcc 6.3 produces the following error:
../lib/librte_acl/acl_run_avx512_common.h: In function
‘resolve_match_idx_avx512x16’:
../lib/librte_acl/acl_run_avx512x16.h:33:18: error:
the last argument must be an 8-bit immediate
^
../lib/librte_acl/acl_run_avx512_common.h:373:9: note:
in expansion of macro ‘_M_I_’
return _M_I_(slli_epi32)(mi, match_log);
^~~~~
Seems like gcc-6.3 complains about the following construct:
static const uint32_t match_log = 5;
...
_mm512_slli_epi32(mi, match_log);
It can't substitute constant variable 'match_log' with its actual value.
The fix replaces constant variable with its immediate value.
Bugzilla ID: 717
Fixes: b64c2295f7 ("acl: add 256-bit AVX512 classify method")
Fixes: 45da22e42e ("acl: add 512-bit AVX512 classify method")
Cc: stable@dpdk.org
Reported-by: Liang Ma <liangma@liangbit.com>
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
__rte_alloc_size is mapped to compiler alloc_size attribute.
Quoting gcc documentation:
"""
alloc_size
The alloc_size attribute is used to tell the compiler that the
function return value points to memory, where the size is given by
one or two of the functions parameters. GCC uses this information
to improve the correctness of __builtin_object_size.
The function parameter(s) denoting the allocated size are specified
by one or two integer arguments supplied to the attribute.
The allocated size is either the value of the single function
argument specified or the product of the two function arguments
specified. Argument numbering starts at one.
"""
In rte_realloc_socket case, only 'size' matters.
Note: this has been spotted by Maxime trying to use rte_realloc_socket
and compiling with gcc 11.
Fixes: 17b347dab7 ("malloc: add alloc_size attribute to functions")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Tested-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Bitmap initialization function is allowed to memset()
caller-provided buffer with number of bytes exceeded
this buffer size. This happens due to wrong comparison
sign between buffer size and number of bytes required
to initialize bitmap.
Fixes: 602c9ca33a ("sched: bitmap is now dynamically allocated")
Cc: stable@dpdk.org
Reported-by: Andy Moreton <amoreton@xilinx.com>
Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Reviewed-by: Andy Moreton <amoreton@xilinx.com>
Signed-off-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add the API to set 'Bus Master Enable' bit to be enabled or disabled in
the PCI command register.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Ray Kinsella <mdr@ashroe.eu>
This code is not performance sensitive and can be switched to dynamic
allocations.
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Ciara Power <ciara.power@intel.com>
In function 'stats_mem_init', pointer 'stats' should
be confirmed not null before memset it.
Fixes: af1ae8b6a3 ("graph: implement stats")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
The Doxygen comments are placed before the related lines,
but the markers were /**< instead of /**
The struct rte_flow_item_integrity did not appear in Doxygen output
because there was no general comment for the struct.
Fixes: b10a421a1f ("ethdev: add packet integrity check flow rules")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>
Acked-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
IOTLB messages will be sent when some queues are not enabled. If we
initialize IOTLB in vhost_user_set_vring_num, it could happen that IOTLB
update comes when IOTLB pool of disabled queues are not initialized.
Fixes: 968bbc7e2e ("vhost: avoid IOTLB mempool allocation while IOMMU disabled")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Chenbo Xia <chenbo.xia@intel.com>
The optimization introduced by
commit d18db8049c ("vhost: read last used index once")
didn't account for the fact that vhost_flush_enqueue_shadow_packed
increments the last_used_idx.
For this reason, store last_used_idx after the potential call to
vhost_flush_enqueue_shadow_packed.
Bugzilla ID: 699
Fixes: d18db8049c ("vhost: read last used index once")
Signed-off-by: Balazs Nemeth <bnemeth@redhat.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Tested-by: Wei Ling <weix.ling@intel.com>
Change the variable type in store_dma_desc_info_packed() to fix
suspicious implicit sign extension.
Coverity issue: 370608, 370610, 370612
Fixes: 873e8dad6f ("vhost: support packed ring in async datapath")
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
A terminated pthread should be joined or detached so that its associated
resources are released.
The "ice-reset-<vf_id>" threads are used to service some reset task in
the background, but they are never joined by the thread that created
them.
The easiest solution is to detach new threads.
The Windows EAL did not provide a pthread_detach wrapper but there is no
resource to release for Windows threads, so add an empty wrapper.
Fixes: 3b3757bda3 ("net/ice: get VF hardware index in DCF")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
In function power_guest_channel_read_msg, 'lcore_id' is used before
validity check, which may cause buffer 'global_fds' accessed by index
'lcore_id' overflow.
This patch moves the validity check of 'lcore_id' before the 'lcore_id'
being used for the first time.
Fixes: 9dc843eb27 ("power: extend guest channel API for reading")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Reviewed-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
Currently, the mp uses gettimeofday() API to get the time, and used as
timeout parameter.
But the time which gets from gettimeofday() API isn't monotonically
increasing. The process may fail if the system time is changed.
This fixes it by using clock_gettime() API with monotonic attribution.
Fixes: 783b6e5497 ("eal: add synchronous multi-process communication")
Fixes: f05e26051c ("eal: add IPC asynchronous request")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Min Hu (Connor) <humin29@huawei.com>
Acked-by: Morten Brørup <mb@smartsharesystems.com>
For 32-bit targets, size_t is normally a 32-bit type and
does not have sufficient range to represent 64-bit offsets
that are needed when mapping PCI addresses.
Use uint64_t instead.
Found when attempting to run 32-bit Linux dpdk-testpmd
using VFIO driver:
EAL: pci_map_resource(): cannot map resource(63, 0xc0010000, \
0x200000, 0x20000000000): Invalid argument ((nil))
Fixes: c4b89ecb64 ("eal: introduce memory management wrappers")
Cc: stable@dpdk.org
Signed-off-by: Lance Richardson <lance.richardson@broadcom.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Spotted by sparse in OVS build:
../../lib/netdev-dpdk.c: note: in included file (through
/home/runner/work/ovs/ovs/dpdk-dir/build/include/rte_ip.h,
/home/runner/work/ovs/ovs/dpdk-dir/build/include/rte_flow.h, ...):
../../include/sparse/arpa/inet.h:22:2: error: "Must include
<netinet/in.h> before <arpa/inet.h> for FreeBSD support"
This is a check enforced by OVS itself.
See [1] for some context.
1: https://github.com/openvswitch/ovs/commit/b2befd5bb2db
Fixes: 89813a522e ("net: provide IP-related API on any OS")
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Dmitry Kozlyuk <dmitry.kozliuk@gmail.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Spotted by sparse in OVS build:
/home/runner/work/ovs/ovs/dpdk-dir/build/include/rte_flow.h:789:27:
error: incorrect type in initializer (different base types)
/home/runner/work/ovs/ovs/dpdk-dir/build/include/rte_flow.h:789:27:
expected unsigned short [usertype] ether_type
/home/runner/work/ovs/ovs/dpdk-dir/build/include/rte_flow.h:789:27:
got restricted ovs_be16 [usertype]
/home/runner/work/ovs/ovs/dpdk-dir/build/include/rte_flow.h:829:25:
error: incorrect type in initializer (different base types)
/home/runner/work/ovs/ovs/dpdk-dir/build/include/rte_flow.h:829:25:
expected unsigned short [usertype] vlan_tci
/home/runner/work/ovs/ovs/dpdk-dir/build/include/rte_flow.h:829:25:
got restricted ovs_be16 [usertype]
/home/runner/work/ovs/ovs/dpdk-dir/build/include/rte_flow.h:830:26:
error: incorrect type in initializer (different base types)
/home/runner/work/ovs/ovs/dpdk-dir/build/include/rte_flow.h:830:26:
expected unsigned short [usertype] eth_proto
/home/runner/work/ovs/ovs/dpdk-dir/build/include/rte_flow.h:830:26:
got restricted ovs_be16 [usertype]
This was not caught before as no code in headers was using those fields.
This changed with commit 6f2168b69a ("ethdev: reuse ethernet header
definition in flow item") and commit a56a262e34 ("ethdev: reuse VLAN
header definition in flow item").
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
