freebsd-dev/sys/conf/files.i386

617 lines
26 KiB
Plaintext
Raw Normal View History

1993-08-21 22:24:24 +00:00
# This file tells config what files go into building a kernel,
# files marked standard are always included.
1993-06-12 14:58:17 +00:00
#
1999-08-28 01:08:13 +00:00
# $FreeBSD$
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
#
# The long compile-with and dependency lines are required because of
# limitations in config: backslash-newline doesn't work in strings, and
# dependency lines other than the first are silently ignored.
#
linux_genassym.o optional compat_linux \
dependency "$S/i386/linux/linux_genassym.c" \
compile-with "${CC} ${CFLAGS:N-fno-common} -c ${.IMPSRC}" \
no-obj no-implicit-rule \
clean "linux_genassym.o"
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
#
linux_assym.h optional compat_linux \
dependency "$S/kern/genassym.sh linux_genassym.o" \
compile-with "sh $S/kern/genassym.sh linux_genassym.o > ${.TARGET}" \
no-obj no-implicit-rule before-depend \
Mega-commit for Linux emulator update.. This has been stress tested under netscape-2.0 for Linux running all the Java stuff. The scrollbars are now working, at least on my machine. (whew! :-) I'm uncomfortable with the size of this commit, but it's too inter-dependant to easily seperate out. The main changes: COMPAT_LINUX is *GONE*. Most of the code has been moved out of the i386 machine dependent section into the linux emulator itself. The int 0x80 syscall code was almost identical to the lcall 7,0 code and a minor tweak allows them to both be used with the same C code. All kernels can now just modload the lkm and it'll DTRT without having to rebuild the kernel first. Like IBCS2, you can statically compile it in with "options LINUX". A pile of new syscalls implemented, including getdents(), llseek(), readv(), writev(), msync(), personality(). The Linux-ELF libraries want to use some of these. linux_select() now obeys Linux semantics, ie: returns the time remaining of the timeout value rather than leaving it the original value. Quite a few bugs removed, including incorrect arguments being used in syscalls.. eg: mixups between passing the sigset as an int, vs passing it as a pointer and doing a copyin(), missing return values, unhandled cases, SIOC* ioctls, etc. The build for the code has changed. i386/conf/files now knows how to build linux_genassym and generate linux_assym.h on the fly. Supporting changes elsewhere in the kernel: The user-mode signal trampoline has moved from the U area to immediately below the top of the stack (below PS_STRINGS). This allows the different binary emulations to have their own signal trampoline code (which gets rid of the hardwired syscall 103 (sigreturn on BSD, syslog on Linux)) and so that the emulator can provide the exact "struct sigcontext *" argument to the program's signal handlers. The sigstack's "ss_flags" now uses SS_DISABLE and SS_ONSTACK flags, which have the same values as the re-used SA_DISABLE and SA_ONSTACK which are intended for sigaction only. This enables the support of a SA_RESETHAND flag to sigaction to implement the gross SYSV and Linux SA_ONESHOT signal semantics where the signal handler is reset when it's triggered. makesyscalls.sh no longer appends the struct sysentvec on the end of the generated init_sysent.c code. It's a lot saner to have it in a seperate file rather than trying to update the structure inside the awk script. :-) At exec time, the dozen bytes or so of signal trampoline code are copied to the top of the user's stack, rather than obtaining the trampoline code the old way by getting a clone of the parent's user area. This allows Linux and native binaries to freely exec each other without getting trampolines mixed up.
1996-03-02 19:38:20 +00:00
clean "linux_assym.h"
#
linux_locore.o optional compat_linux \
dependency "linux_assym.h $S/i386/linux/linux_locore.s" \
compile-with "${CC} -x assembler-with-cpp -DLOCORE -shared -s -pipe -I. -I$S -Werror -Wall -fno-common -nostdinc -nostdlib -Wl,-T$S/i386/linux/linux_vdso.lds.s -Wl,-soname=linux_vdso.so,--eh-frame-hdr,-fPIC,-warn-common ${.IMPSRC} -o ${.TARGET}" \
no-obj no-implicit-rule \
clean "linux_locore.o"
#
linux_vdso.so optional compat_linux \
dependency "linux_locore.o" \
compile-with "${OBJCOPY} --input-target binary --output-target elf32-i386-freebsd --binary-architecture i386 linux_locore.o ${.TARGET}" \
no-implicit-rule \
clean "linux_vdso.so"
#
svr4_genassym.o optional compat_svr4 \
dependency "$S/i386/svr4/svr4_genassym.c" \
compile-with "${CC} ${CFLAGS:N-fno-common} -c ${.IMPSRC}" \
no-obj no-implicit-rule \
clean "svr4_genassym.o"
#
svr4_assym.h optional compat_svr4 \
dependency "$S/kern/genassym.sh svr4_genassym.o" \
compile-with "sh $S/kern/genassym.sh svr4_genassym.o > ${.TARGET}" \
no-obj no-implicit-rule before-depend \
clean "svr4_assym.h"
#
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
font.h optional sc_dflt_font \
2007-10-25 14:16:07 +00:00
compile-with "uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x16.fnt && file2c 'static u_char dflt_font_16[16*256] = {' '};' < ${SC_DFLT_FONT}-8x16 > font.h && uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x14.fnt && file2c 'static u_char dflt_font_14[14*256] = {' '};' < ${SC_DFLT_FONT}-8x14 >> font.h && uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x8.fnt && file2c 'static u_char dflt_font_8[8*256] = {' '};' < ${SC_DFLT_FONT}-8x8 >> font.h" \
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
no-obj no-implicit-rule before-depend \
2000-03-23 15:42:24 +00:00
clean "font.h ${SC_DFLT_FONT}-8x14 ${SC_DFLT_FONT}-8x16 ${SC_DFLT_FONT}-8x8"
#
atkbdmap.h optional atkbd_dflt_keymap \
compile-with "/usr/sbin/kbdcontrol -L ${ATKBD_DFLT_KEYMAP} | sed -e 's/^static keymap_t.* = /static keymap_t key_map = /' -e 's/^static accentmap_t.* = /static accentmap_t accent_map = /' > atkbdmap.h" \
no-obj no-implicit-rule before-depend \
clean "atkbdmap.h"
#
ukbdmap.h optional ukbd_dflt_keymap \
compile-with "/usr/sbin/kbdcontrol -L ${UKBD_DFLT_KEYMAP} | sed -e 's/^static keymap_t.* = /static keymap_t key_map = /' -e 's/^static accentmap_t.* = /static accentmap_t accent_map = /' > ukbdmap.h" \
no-obj no-implicit-rule before-depend \
clean "ukbdmap.h"
#
hpt27xx_lib.o optional hpt27xx \
dependency "$S/dev/hpt27xx/i386-elf.hpt27xx_lib.o.uu" \
compile-with "uudecode < $S/dev/hpt27xx/i386-elf.hpt27xx_lib.o.uu" \
no-implicit-rule
#
2004-10-24 08:53:40 +00:00
hptmvraid.o optional hptmv \
2007-10-25 14:16:07 +00:00
dependency "$S/dev/hptmv/i386-elf.raid.o.uu" \
compile-with "uudecode < $S/dev/hptmv/i386-elf.raid.o.uu" \
2004-10-24 08:53:40 +00:00
no-implicit-rule
#
hptnr_lib.o optional hptnr \
dependency "$S/dev/hptnr/i386-elf.hptnr_lib.o.uu" \
compile-with "uudecode < $S/dev/hptnr/i386-elf.hptnr_lib.o.uu" \
no-implicit-rule
#
hptrr_lib.o optional hptrr \
dependency "$S/dev/hptrr/i386-elf.hptrr_lib.o.uu" \
compile-with "uudecode < $S/dev/hptrr/i386-elf.hptrr_lib.o.uu" \
no-implicit-rule
#
cddl/contrib/opensolaris/common/atomic/i386/opensolaris_atomic.S optional zfs | dtrace compile-with "${ZFS_S}"
cddl/dev/dtrace/i386/dtrace_asm.S optional dtrace compile-with "${DTRACE_S}"
cddl/dev/dtrace/i386/dtrace_subr.c optional dtrace compile-with "${DTRACE_C}"
cddl/dev/fbt/x86/fbt_isa.c optional dtrace_fbt | dtraceall compile-with "${FBT_C}"
cddl/dev/dtrace/x86/dis_tables.c optional dtrace_fbt | dtraceall compile-with "${DTRACE_C}"
cddl/dev/dtrace/i386/instr_size.c optional dtrace_fbt | dtraceall compile-with "${DTRACE_C}"
compat/linprocfs/linprocfs.c optional linprocfs
compat/linsysfs/linsysfs.c optional linsysfs
compat/linux/linux_event.c optional compat_linux
compat/linux/linux_emul.c optional compat_linux
compat/linux/linux_file.c optional compat_linux
compat/linux/linux_fork.c optional compat_linux
compat/linux/linux_futex.c optional compat_linux
compat/linux/linux_getcwd.c optional compat_linux
compat/linux/linux_ioctl.c optional compat_linux
compat/linux/linux_ipc.c optional compat_linux
compat/linux/linux_mib.c optional compat_linux
compat/linux/linux_misc.c optional compat_linux
compat/linux/linux_signal.c optional compat_linux
compat/linux/linux_socket.c optional compat_linux
compat/linux/linux_stats.c optional compat_linux
compat/linux/linux_sysctl.c optional compat_linux
compat/linux/linux_time.c optional compat_linux
compat/linux/linux_timer.c optional compat_linux
compat/linux/linux_uid16.c optional compat_linux
compat/linux/linux_util.c optional compat_linux
compat/linux/linux_vdso.c optional compat_linux
compat/linux/linux.c optional compat_linux
compat/ndis/kern_ndis.c optional ndisapi pci
Next step on the road to IRPs: create and use an imitation of the Windows DRIVER_OBJECT and DEVICE_OBJECT mechanism so that we can simulate driver stacking. In Windows, each loaded driver image is attached to a DRIVER_OBJECT structure. Windows uses the registry to match up a given vendor/device ID combination with a corresponding DRIVER_OBJECT. When a driver image is first loaded, its DriverEntry() routine is invoked, which sets up the AddDevice() function pointer in the DRIVER_OBJECT and creates a dispatch table (based on IRP major codes). When a Windows bus driver detects a new device, it creates a Physical Device Object (PDO) for it. This is a DEVICE_OBJECT structure, with semantics analagous to that of a device_t in FreeBSD. The Windows PNP manager will invoke the driver's AddDevice() function and pass it pointers to the DRIVER_OBJECT and the PDO. The AddDevice() function then creates a new DRIVER_OBJECT structure of its own. This is known as the Functional Device Object (FDO) and corresponds roughly to a private softc instance. The driver uses IoAttachDeviceToDeviceStack() to add this device object to the driver stack for this PDO. Subsequent drivers (called filter drivers in Windows-speak) can be loaded which add themselves to the stack. When someone issues an IRP to a device, it travel along the stack passing through several possible filter drivers until it reaches the functional driver (which actually knows how to talk to the hardware) at which point it will be completed. This is how Windows achieves driver layering. Project Evil now simulates most of this. if_ndis now has a modevent handler which will use MOD_LOAD and MOD_UNLOAD events to drive the creation and destruction of DRIVER_OBJECTs. (The load event also does the relocation/dynalinking of the image.) We don't have a registry, so the DRIVER_OBJECTS are stored in a linked list for now. Eventually, the list entry will contain the vendor/device ID list extracted from the .INF file. When ndis_probe() is called and detectes a supported device, it will create a PDO for the device instance and attach it to the DRIVER_OBJECT just as in Windows. ndis_attach() will then call our NdisAddDevice() handler to create the FDO. The NDIS miniport block is now a device extension hung off the FDO, just as it is in Windows. The miniport characteristics table is now an extension hung off the DRIVER_OBJECT as well (the characteristics are the same for all devices handled by a given driver, so they don't need to be per-instance.) We also do an IoAttachDeviceToDeviceStack() to put the FDO on the stack for the PDO. There are a couple of fake bus drivers created for the PCI and pccard buses. Eventually, there will be one for USB, which will actually accept USB IRP.s Things should still work just as before, only now we do things in the proper order and maintain the correct framework to support passing IRPs between drivers. Various changes: - corrected the comments about IRQL handling in subr_hal.c to more accurately reflect reality - update ndiscvt to make the drv_data symbol in ndis_driver_data.h a global so that if_ndis_pci.o and/or if_ndis_pccard.o can see it. - Obtain the softc pointer from the miniport block by referencing the PDO rather than a private pointer of our own (nmb_ifp is no longer used) - implement IoAttachDeviceToDeviceStack(), IoDetachDevice(), IoGetAttachedDevice(), IoAllocateDriverObjectExtension(), IoGetDriverObjectExtension(), IoCreateDevice(), IoDeleteDevice(), IoAllocateIrp(), IoReuseIrp(), IoMakeAssociatedIrp(), IoFreeIrp(), IoInitializeIrp() - fix a few mistakes in the driver_object and device_object definitions - add a new module, kern_windrv.c, to handle the driver registration and relocation/dynalinkign duties (which don't really belong in kern_ndis.c). - made ndis_block and ndis_chars in the ndis_softc stucture pointers and modified all references to it - fixed NdisMRegisterMiniport() and NdisInitializeWrapper() so they work correctly with the new driver_object mechanism - changed ndis_attach() to call NdisAddDevice() instead of ndis_load_driver() (which is now deprecated) - used ExAllocatePoolWithTag()/ExFreePool() in lookaside list routines instead of kludged up alloc/free routines - added kern_windrv.c to sys/modules/ndis/Makefile and files.i386.
2005-02-08 17:23:25 +00:00
compat/ndis/kern_windrv.c optional ndisapi pci
compat/ndis/subr_hal.c optional ndisapi pci
compat/ndis/subr_ndis.c optional ndisapi pci
compat/ndis/subr_ntoskrnl.c optional ndisapi pci
compat/ndis/subr_pe.c optional ndisapi pci
- Correct one aspect of the driver_object/device_object/IRP framework: when we create a PDO, the driver_object associated with it is that of the parent driver, not the driver we're trying to attach. For example, if we attach a PCI device, the PDO we pass to the NdisAddDevice() function should contain a pointer to fake_pci_driver, not to the NDIS driver itself. For PCI or PCMCIA devices this doesn't matter because the child never needs to talk to the parent bus driver, but for USB, the child needs to be able to send IRPs to the parent USB bus driver, and for that to work the parent USB bus driver has to be hung off the PDO. This involves modifying windrv_lookup() so that we can search for bus drivers by name, if necessary. Our fake bus drivers attach themselves as "PCI Bus," "PCCARD Bus" and "USB Bus," so we can search for them using those names. The individual attachment stubs now create and attach PDOs to the parent bus drivers instead of hanging them off the NDIS driver's object, and in if_ndis.c, we now search for the correct driver object depending on the bus type, and use that to find the correct PDO. With this fix, I can get my sample USB ethernet driver to deliver an IRP to my fake parent USB bus driver's dispatch routines. - Add stub modules for USB support: subr_usbd.c, usbd_var.h and if_ndis_usb.c. The subr_usbd.c module is hooked up the build but currently doesn't do very much. It provides the stub USB parent driver object and a dispatch routine for IRM_MJ_INTERNAL_DEVICE_CONTROL. The only exported function at the moment is USBD_GetUSBDIVersion(). The if_ndis_usb.c stub compiles, but is not hooked up to the build yet. I'm putting these here so I can keep them under source code control as I flesh them out.
2005-02-24 21:49:14 +00:00
compat/ndis/subr_usbd.c optional ndisapi pci
compat/ndis/winx32_wrap.S optional ndisapi pci
compat/svr4/imgact_svr4.c optional compat_svr4
compat/svr4/svr4_fcntl.c optional compat_svr4
compat/svr4/svr4_filio.c optional compat_svr4
compat/svr4/svr4_ioctl.c optional compat_svr4
compat/svr4/svr4_ipc.c optional compat_svr4
compat/svr4/svr4_misc.c optional compat_svr4
compat/svr4/svr4_resource.c optional compat_svr4
compat/svr4/svr4_signal.c optional compat_svr4
compat/svr4/svr4_socket.c optional compat_svr4
compat/svr4/svr4_sockio.c optional compat_svr4
compat/svr4/svr4_stat.c optional compat_svr4
compat/svr4/svr4_stream.c optional compat_svr4
compat/svr4/svr4_syscallnames.c optional compat_svr4
compat/svr4/svr4_sysent.c optional compat_svr4
compat/svr4/svr4_sysvec.c optional compat_svr4
compat/svr4/svr4_termios.c optional compat_svr4
bf_enc.o optional crypto | ipsec \
dependency "$S/crypto/blowfish/arch/i386/bf_enc.S $S/crypto/blowfish/arch/i386/bf_enc_586.S $S/crypto/blowfish/arch/i386/bf_enc_686.S" \
compile-with "${CC} -c -I$S/crypto/blowfish/arch/i386 ${ASM_CFLAGS} ${WERROR} ${.IMPSRC}" \
no-implicit-rule
crypto/aesni/aeskeys_i386.S optional aesni
crypto/aesni/aesni.c optional aesni
2014-12-12 19:56:36 +00:00
aesni_ghash.o optional aesni \
dependency "$S/crypto/aesni/aesni_ghash.c" \
compile-with "${CC} -c ${CFLAGS:C/^-O2$/-O3/:N-nostdinc} ${WERROR} ${NO_WCAST_QUAL} ${PROF} -mmmx -msse -msse4 -maes -mpclmul ${.IMPSRC}" \
2014-12-12 19:56:36 +00:00
no-implicit-rule \
clean "aesni_ghash.o"
aesni_wrap.o optional aesni \
dependency "$S/crypto/aesni/aesni_wrap.c" \
compile-with "${CC} -c ${CFLAGS:C/^-O2$/-O3/:N-nostdinc} ${WERROR} ${NO_WCAST_QUAL} ${PROF} -mmmx -msse -msse4 -maes ${.IMPSRC}" \
no-implicit-rule \
clean "aesni_wrap.o"
crypto/des/arch/i386/des_enc.S optional crypto | ipsec | netsmb
crypto/via/padlock.c optional padlock
crypto/via/padlock_cipher.c optional padlock
crypto/via/padlock_hash.c optional padlock
dev/advansys/adv_isa.c optional adv isa
dev/agp/agp_ali.c optional agp
dev/agp/agp_amd.c optional agp
dev/agp/agp_amd64.c optional agp
dev/agp/agp_ati.c optional agp
dev/agp/agp_i810.c optional agp
dev/agp/agp_intel.c optional agp
dev/agp/agp_nvidia.c optional agp
dev/agp/agp_sis.c optional agp
dev/agp/agp_via.c optional agp
dev/aic/aic_isa.c optional aic isa
dev/amdsbwd/amdsbwd.c optional amdsbwd
dev/amdtemp/amdtemp.c optional amdtemp
2005-03-31 20:21:43 +00:00
dev/arcmsr/arcmsr.c optional arcmsr pci
dev/asmc/asmc.c optional asmc isa
- Hook up the new locations of the atkbdc(4), atkbd(4) and psm(4) source files after they were repo-copied to sys/dev/atkbdc. The sources of atkbdc(4) and its children were moved to the new location in preparation for adding an EBus front-end to atkbdc(4) for use on sparc64; i.e. in order to not further scatter them over the whole tree which would have been the result of adding atkbdc_ebus.c in e.g. sys/sparc64/ebus. Another reason for the repo-copies was that some of the sources were misfiled, e.g. sys/isa/atkbd_isa.c wasn't ISA-specific at all but for hanging atkbd(4) off of atkbdc(4) and was renamed to atkbd_atkbdc.c accordingly. Most of sys/isa/psm.c, i.e. expect for its PSMC PNP part, also isn't ISA-specific. - Separate the parts of atkbdc_isa.c which aren't actually ISA-specific but are shareable between different atkbdc(4) bus front-ends into atkbdc_subr.c (repo-copied from atkbdc_isa.c). While here use bus_generic_rl_alloc_resource() and bus_generic_rl_release_resource() respectively in atkbdc_isa.c instead of rolling own versions. - Add sparc64 MD bits to atkbdc(4) and atkbd(4) and an EBus front-end for atkbdc(4). PS/2 controllers and input devices are used on a couple of Sun OEM boards and occur on either the EBus or the ISA bus. Depending on the board it's either the only on-board mean to connect a keyboard and mouse or an alternative to either RS232 or USB devices. - Wrap the PSMC PNP part of psm.c in #ifdef DEV_ISA so it can be compiled without isa(4) (e.g. for EBus-only machines). This ISA-specific part isn't separated into its own source file, yet, as it requires more work than was feasible for 6.0 in order to do it in a clean way. Actually philip@ is working on a rewrite of psm(4) so a more comprehensive clean-up and separation of hardware dependent and independent parts is expected to happen after 6.0. Tested on: i386, sparc64 (AX1105, AXe and AXi boards) Reviewed by: philip
2005-06-10 20:56:38 +00:00
dev/atkbdc/atkbd.c optional atkbd atkbdc
dev/atkbdc/atkbd_atkbdc.c optional atkbd atkbdc
dev/atkbdc/atkbdc.c optional atkbdc
dev/atkbdc/atkbdc_isa.c optional atkbdc isa
dev/atkbdc/atkbdc_subr.c optional atkbdc
dev/atkbdc/psm.c optional psm atkbdc
dev/bxe/bxe.c optional bxe pci
dev/bxe/bxe_stats.c optional bxe pci
dev/bxe/bxe_debug.c optional bxe pci
dev/bxe/ecore_sp.c optional bxe pci
dev/bxe/bxe_elink.c optional bxe pci
dev/bxe/57710_init_values.c optional bxe pci
dev/bxe/57711_init_values.c optional bxe pci
dev/bxe/57712_init_values.c optional bxe pci
dev/ce/ceddk.c optional ce
dev/ce/if_ce.c optional ce
dev/ce/tau32-ddk.c optional ce \
compile-with "${NORMAL_C} ${NO_WCONSTANT_CONVERSION}"
dev/cm/if_cm_isa.c optional cm isa
dev/coretemp/coretemp.c optional coretemp
dev/cp/cpddk.c optional cp
dev/cp/if_cp.c optional cp
dev/cpuctl/cpuctl.c optional cpuctl
dev/ctau/ctau.c optional ctau
dev/ctau/ctddk.c optional ctau
dev/ctau/if_ct.c optional ctau
dev/cx/csigma.c optional cx
dev/cx/cxddk.c optional cx
dev/cx/if_cx.c optional cx
dev/dpms/dpms.c optional dpms
dev/ed/if_ed_3c503.c optional ed isa ed_3c503
dev/ed/if_ed_isa.c optional ed isa
dev/ed/if_ed_wd80x3.c optional ed isa
dev/ed/if_ed_hpp.c optional ed isa ed_hpp
dev/ed/if_ed_sic.c optional ed isa ed_sic
dev/fb/fb.c optional fb | vga
dev/fb/s3_pci.c optional s3pci
dev/fb/vesa.c optional vga vesa
dev/fb/vga.c optional vga
dev/fdc/fdc.c optional fdc
dev/fdc/fdc_acpi.c optional fdc
dev/fdc/fdc_isa.c optional fdc isa
dev/fdc/fdc_pccard.c optional fdc pccard
dev/fdt/fdt_x86.c optional fdt
dev/fe/if_fe_isa.c optional fe isa
dev/glxiic/glxiic.c optional glxiic
dev/glxsb/glxsb.c optional glxsb
dev/glxsb/glxsb_hash.c optional glxsb
dev/hpt27xx/hpt27xx_os_bsd.c optional hpt27xx
dev/hpt27xx/hpt27xx_osm_bsd.c optional hpt27xx
dev/hpt27xx/hpt27xx_config.c optional hpt27xx
dev/hptmv/entry.c optional hptmv
dev/hptmv/mv.c optional hptmv
dev/hptmv/gui_lib.c optional hptmv
dev/hptmv/hptproc.c optional hptmv
dev/hptmv/ioctl.c optional hptmv
dev/hptnr/hptnr_os_bsd.c optional hptnr
dev/hptnr/hptnr_osm_bsd.c optional hptnr
dev/hptnr/hptnr_config.c optional hptnr
dev/hptrr/hptrr_os_bsd.c optional hptrr
dev/hptrr/hptrr_osm_bsd.c optional hptrr
dev/hptrr/hptrr_config.c optional hptrr
dev/hwpmc/hwpmc_amd.c optional hwpmc
dev/hwpmc/hwpmc_intel.c optional hwpmc
dev/hwpmc/hwpmc_core.c optional hwpmc
dev/hwpmc/hwpmc_uncore.c optional hwpmc
dev/hwpmc/hwpmc_pentium.c optional hwpmc
dev/hwpmc/hwpmc_piv.c optional hwpmc
dev/hwpmc/hwpmc_ppro.c optional hwpmc
dev/hwpmc/hwpmc_tsc.c optional hwpmc
dev/hwpmc/hwpmc_x86.c optional hwpmc
dev/hyperv/netvsc/hv_net_vsc.c optional hyperv
dev/hyperv/netvsc/hv_netvsc_drv_freebsd.c optional hyperv
dev/hyperv/netvsc/hv_rndis_filter.c optional hyperv
dev/hyperv/stordisengage/hv_ata_pci_disengage.c optional hyperv
dev/hyperv/storvsc/hv_storvsc_drv_freebsd.c optional hyperv
dev/hyperv/utilities/hv_kvp.c optional hyperv
dev/hyperv/utilities/hv_util.c optional hyperv
dev/hyperv/vmbus/hv_channel.c optional hyperv
dev/hyperv/vmbus/hv_channel_mgmt.c optional hyperv
dev/hyperv/vmbus/hv_connection.c optional hyperv
dev/hyperv/vmbus/hv_hv.c optional hyperv
dev/hyperv/vmbus/hv_ring_buffer.c optional hyperv
dev/hyperv/vmbus/hv_vmbus_drv_freebsd.c optional hyperv
dev/ichwd/ichwd.c optional ichwd
dev/if_ndis/if_ndis.c optional ndis
dev/if_ndis/if_ndis_pccard.c optional ndis pccard
dev/if_ndis/if_ndis_pci.c optional ndis cardbus | ndis pci
Throw the switch on the new driver generation/loading mechanism. From here on in, if_ndis.ko will be pre-built as a module, and can be built into a static kernel (though it's not part of GENERIC). Drivers are created using the new ndisgen(8) script, which uses ndiscvt(8) under the covers, along with a few other tools. The result is a driver module that can be kldloaded into the kernel. A driver with foo.inf and foo.sys files will be converted into foo_sys.ko (and foo_sys.o, for those who want/need to make static kernels). This module contains all of the necessary info from the .INF file and the driver binary image, converted into an ELF module. You can kldload this module (or add it to /boot/loader.conf) to have it loaded automatically. Any required firmware files can be bundled into the module as well (or converted/loaded separately). Also, add a workaround for a problem in NdisMSleep(). During system bootstrap (cold == 1), msleep() always returns 0 without actually sleeping. The Intel 2200BG driver uses NdisMSleep() to wait for the NIC's firmware to come to life, and fails to load if NdisMSleep() doesn't actually delay. As a workaround, if msleep() (and hence ndis_thsuspend()) returns 0, use a hard DELAY() to sleep instead). This is not really the right thing to do, but we can't really do much else. At the very least, this makes the Intel driver happy. There are probably other drivers that fail in this way during bootstrap. Unfortunately, the only workaround for those is to avoid pre-loading them and kldload them once the system is running instead.
2005-04-24 20:21:22 +00:00
dev/if_ndis/if_ndis_usb.c optional ndis usb
dev/io/iodev.c optional io
dev/ipmi/ipmi.c optional ipmi
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
2006-09-22 22:11:29 +00:00
dev/ipmi/ipmi_acpi.c optional ipmi acpi
dev/ipmi/ipmi_isa.c optional ipmi isa
dev/ipmi/ipmi_kcs.c optional ipmi
dev/ipmi/ipmi_smic.c optional ipmi
dev/ipmi/ipmi_smbus.c optional ipmi smbus
dev/ipmi/ipmi_smbios.c optional ipmi
dev/ipmi/ipmi_ssif.c optional ipmi smbus
dev/ipmi/ipmi_pci.c optional ipmi pci
dev/ipmi/ipmi_linux.c optional ipmi compat_linux
dev/le/if_le_isa.c optional le isa
dev/mse/mse.c optional mse
dev/mse/mse_isa.c optional mse isa
dev/nfe/if_nfe.c optional nfe pci
dev/ntb/if_ntb/if_ntb.c optional if_ntb
dev/ntb/ntb_hw/ntb_hw.c optional if_ntb | ntb_hw
dev/nvd/nvd.c optional nvd nvme
dev/nvme/nvme.c optional nvme
dev/nvme/nvme_ctrlr.c optional nvme
dev/nvme/nvme_ctrlr_cmd.c optional nvme
dev/nvme/nvme_ns.c optional nvme
dev/nvme/nvme_ns_cmd.c optional nvme
dev/nvme/nvme_qpair.c optional nvme
dev/nvme/nvme_sysctl.c optional nvme
dev/nvme/nvme_test.c optional nvme
dev/nvme/nvme_util.c optional nvme
dev/nvram/nvram.c optional nvram isa
dev/pcf/pcf_isa.c optional pcf
dev/random/ivy.c optional rdrand_rng
dev/random/nehemiah.c optional padlock_rng
dev/sbni/if_sbni.c optional sbni
dev/sbni/if_sbni_isa.c optional sbni isa
dev/sbni/if_sbni_pci.c optional sbni pci
dev/sio/sio.c optional sio
dev/sio/sio_isa.c optional sio isa
dev/sio/sio_pccard.c optional sio pccard
dev/sio/sio_pci.c optional sio pci
dev/sio/sio_puc.c optional sio puc
dev/speaker/spkr.c optional speaker
dev/syscons/apm/apm_saver.c optional apm_saver apm
Replace syscons terminal renderer by a new renderer that uses libteken. Some time ago I started working on a library called libteken, which is terminal emulator. It does not buffer any screen contents, but only keeps terminal state, such as cursor position, attributes, etc. It should implement all escape sequences that are implemented by the cons25 terminal emulator, but also a fair amount of sequences that are present in VT100 and xterm. A lot of random notes, which could be of interest to users/developers: - Even though I'm leaving the terminal type set to `cons25', users can do experiments with placing `xterm-color' in /etc/ttys. Because we only implement a subset of features of xterm, this may cause artifacts. We should consider extending libteken, because in my opinion xterm is the way to go. Some missing features: - Keypad application mode (DECKPAM) - Character sets (SCS) - libteken is filled with a fair amount of assertions, but unfortunately we cannot go into the debugger anymore if we fail them. I've done development of this library almost entirely in userspace. In sys/dev/syscons/teken there are two applications that can be helpful when debugging the code: - teken_demo: a terminal emulator that can be started from a regular xterm that emulates a terminal using libteken. This application can be very useful to debug any rendering issues. - teken_stress: a stress testing application that emulates random terminal output. libteken has literally survived multiple terabytes of random input. - libteken also includes support for UTF-8, but unfortunately our input layer and font renderer don't support this. If users want to experiment with UTF-8 support, they can enable `TEKEN_UTF8' in teken.h. If you recompile your kernel or the teken_demo application, you can hold some nice experiments. - I've left PC98 the way it is right now. The PC98 platform has a custom syscons renderer, which supports some form of localised input. Maybe we should port PC98 to libteken by the time syscons supports UTF-8? - I've removed the `dumb' terminal emulator. It has been broken for years. It hasn't survived the `struct proc' -> `struct thread' conversion. - To prevent confusion among people that want to hack on libteken: unlike syscons, the state machines that parse the escape sequences are machine generated. This means that if you want to add new escape sequences, you have to add an entry to the `sequences' file. This will cause new entries to be added to `teken_state.h'. - Any rendering artifacts that didn't occur prior to this commit are by accident. They should be reported to me, so I can fix them. Discussed on: current@, hackers@ Discussed with: philip (at 25C3)
2009-01-01 13:26:53 +00:00
dev/syscons/scterm-teken.c optional sc
dev/syscons/scvesactl.c optional sc vga vesa
dev/syscons/scvgarndr.c optional sc vga
dev/syscons/scvtb.c optional sc
dev/tpm/tpm.c optional tpm
dev/tpm/tpm_acpi.c optional tpm acpi
dev/tpm/tpm_isa.c optional tpm isa
dev/uart/uart_cpu_x86.c optional uart
dev/viawd/viawd.c optional viawd
dev/vmware/vmxnet3/if_vmx.c optional vmx
dev/acpica/acpi_if.m standard
dev/acpica/acpi_hpet.c optional acpi
dev/acpi_support/acpi_wmi_if.m standard
dev/wbwd/wbwd.c optional wbwd
dev/wpi/if_wpi.c optional wpi
dev/isci/isci.c optional isci
dev/isci/isci_controller.c optional isci
dev/isci/isci_domain.c optional isci
dev/isci/isci_interrupt.c optional isci
dev/isci/isci_io_request.c optional isci
dev/isci/isci_logger.c optional isci
dev/isci/isci_oem_parameters.c optional isci
dev/isci/isci_remote_device.c optional isci
dev/isci/isci_sysctl.c optional isci
dev/isci/isci_task_request.c optional isci
dev/isci/isci_timer.c optional isci
dev/isci/scil/sati.c optional isci
dev/isci/scil/sati_abort_task_set.c optional isci
dev/isci/scil/sati_atapi.c optional isci
dev/isci/scil/sati_device.c optional isci
dev/isci/scil/sati_inquiry.c optional isci
dev/isci/scil/sati_log_sense.c optional isci
dev/isci/scil/sati_lun_reset.c optional isci
dev/isci/scil/sati_mode_pages.c optional isci
dev/isci/scil/sati_mode_select.c optional isci
dev/isci/scil/sati_mode_sense.c optional isci
dev/isci/scil/sati_mode_sense_10.c optional isci
dev/isci/scil/sati_mode_sense_6.c optional isci
dev/isci/scil/sati_move.c optional isci
dev/isci/scil/sati_passthrough.c optional isci
dev/isci/scil/sati_read.c optional isci
dev/isci/scil/sati_read_buffer.c optional isci
dev/isci/scil/sati_read_capacity.c optional isci
dev/isci/scil/sati_reassign_blocks.c optional isci
dev/isci/scil/sati_report_luns.c optional isci
dev/isci/scil/sati_request_sense.c optional isci
dev/isci/scil/sati_start_stop_unit.c optional isci
dev/isci/scil/sati_synchronize_cache.c optional isci
dev/isci/scil/sati_test_unit_ready.c optional isci
dev/isci/scil/sati_unmap.c optional isci
dev/isci/scil/sati_util.c optional isci
dev/isci/scil/sati_verify.c optional isci
dev/isci/scil/sati_write.c optional isci
dev/isci/scil/sati_write_and_verify.c optional isci
dev/isci/scil/sati_write_buffer.c optional isci
dev/isci/scil/sati_write_long.c optional isci
dev/isci/scil/sci_abstract_list.c optional isci
dev/isci/scil/sci_base_controller.c optional isci
dev/isci/scil/sci_base_domain.c optional isci
dev/isci/scil/sci_base_iterator.c optional isci
dev/isci/scil/sci_base_library.c optional isci
dev/isci/scil/sci_base_logger.c optional isci
dev/isci/scil/sci_base_memory_descriptor_list.c optional isci
dev/isci/scil/sci_base_memory_descriptor_list_decorator.c optional isci
dev/isci/scil/sci_base_object.c optional isci
dev/isci/scil/sci_base_observer.c optional isci
dev/isci/scil/sci_base_phy.c optional isci
dev/isci/scil/sci_base_port.c optional isci
dev/isci/scil/sci_base_remote_device.c optional isci
dev/isci/scil/sci_base_request.c optional isci
dev/isci/scil/sci_base_state_machine.c optional isci
dev/isci/scil/sci_base_state_machine_logger.c optional isci
dev/isci/scil/sci_base_state_machine_observer.c optional isci
dev/isci/scil/sci_base_subject.c optional isci
dev/isci/scil/sci_util.c optional isci
dev/isci/scil/scic_sds_controller.c optional isci
dev/isci/scil/scic_sds_library.c optional isci
dev/isci/scil/scic_sds_pci.c optional isci
dev/isci/scil/scic_sds_phy.c optional isci
dev/isci/scil/scic_sds_port.c optional isci
dev/isci/scil/scic_sds_port_configuration_agent.c optional isci
dev/isci/scil/scic_sds_remote_device.c optional isci
dev/isci/scil/scic_sds_remote_node_context.c optional isci
dev/isci/scil/scic_sds_remote_node_table.c optional isci
dev/isci/scil/scic_sds_request.c optional isci
dev/isci/scil/scic_sds_sgpio.c optional isci
dev/isci/scil/scic_sds_smp_remote_device.c optional isci
dev/isci/scil/scic_sds_smp_request.c optional isci
dev/isci/scil/scic_sds_ssp_request.c optional isci
dev/isci/scil/scic_sds_stp_packet_request.c optional isci
dev/isci/scil/scic_sds_stp_remote_device.c optional isci
dev/isci/scil/scic_sds_stp_request.c optional isci
dev/isci/scil/scic_sds_unsolicited_frame_control.c optional isci
dev/isci/scil/scif_sas_controller.c optional isci
dev/isci/scil/scif_sas_controller_state_handlers.c optional isci
dev/isci/scil/scif_sas_controller_states.c optional isci
dev/isci/scil/scif_sas_domain.c optional isci
dev/isci/scil/scif_sas_domain_state_handlers.c optional isci
dev/isci/scil/scif_sas_domain_states.c optional isci
dev/isci/scil/scif_sas_high_priority_request_queue.c optional isci
dev/isci/scil/scif_sas_internal_io_request.c optional isci
dev/isci/scil/scif_sas_io_request.c optional isci
dev/isci/scil/scif_sas_io_request_state_handlers.c optional isci
dev/isci/scil/scif_sas_io_request_states.c optional isci
dev/isci/scil/scif_sas_library.c optional isci
dev/isci/scil/scif_sas_remote_device.c optional isci
dev/isci/scil/scif_sas_remote_device_ready_substate_handlers.c optional isci
dev/isci/scil/scif_sas_remote_device_ready_substates.c optional isci
dev/isci/scil/scif_sas_remote_device_starting_substate_handlers.c optional isci
dev/isci/scil/scif_sas_remote_device_starting_substates.c optional isci
dev/isci/scil/scif_sas_remote_device_state_handlers.c optional isci
dev/isci/scil/scif_sas_remote_device_states.c optional isci
dev/isci/scil/scif_sas_request.c optional isci
dev/isci/scil/scif_sas_smp_activity_clear_affiliation.c optional isci
dev/isci/scil/scif_sas_smp_io_request.c optional isci
dev/isci/scil/scif_sas_smp_phy.c optional isci
dev/isci/scil/scif_sas_smp_remote_device.c optional isci
dev/isci/scil/scif_sas_stp_io_request.c optional isci
dev/isci/scil/scif_sas_stp_remote_device.c optional isci
dev/isci/scil/scif_sas_stp_task_request.c optional isci
dev/isci/scil/scif_sas_task_request.c optional isci
dev/isci/scil/scif_sas_task_request_state_handlers.c optional isci
dev/isci/scil/scif_sas_task_request_states.c optional isci
dev/isci/scil/scif_sas_timer.c optional isci
i386/acpica/acpi_machdep.c optional acpi
acpi_wakecode.o optional acpi \
dependency "$S/i386/acpica/acpi_wakecode.S assym.s" \
compile-with "${NORMAL_S}" \
no-obj no-implicit-rule before-depend \
clean "acpi_wakecode.o"
acpi_wakecode.bin optional acpi \
dependency "acpi_wakecode.o" \
compile-with "${OBJCOPY} -S -O binary acpi_wakecode.o ${.TARGET}" \
no-obj no-implicit-rule before-depend \
clean "acpi_wakecode.bin"
acpi_wakecode.h optional acpi \
dependency "acpi_wakecode.bin" \
compile-with "file2c -sx 'static char wakecode[] = {' '};' < acpi_wakecode.bin > ${.TARGET}" \
no-obj no-implicit-rule before-depend \
clean "acpi_wakecode.h"
acpi_wakedata.h optional acpi \
dependency "acpi_wakecode.o" \
compile-with '${NM} -n --defined-only acpi_wakecode.o | while read offset dummy what; do echo "#define $${what} 0x$${offset}"; done > ${.TARGET}' \
no-obj no-implicit-rule before-depend \
clean "acpi_wakedata.h"
#
i386/bios/apm.c optional apm
i386/bios/mca_machdep.c optional mca
i386/bios/smapi.c optional smapi
i386/bios/smapi_bios.S optional smapi
#i386/i386/apic_vector.s optional apic
2007-10-25 14:16:07 +00:00
i386/i386/atomic.c standard \
compile-with "${CC} -c ${CFLAGS} ${DEFINED_PROF:S/^$/-fomit-frame-pointer/} ${.IMPSRC}"
i386/i386/autoconf.c standard
i386/i386/bios.c standard
i386/i386/bioscall.s standard
i386/i386/bpf_jit_machdep.c optional bpf_jitter
i386/i386/db_disasm.c optional ddb
i386/i386/db_interface.c optional ddb
i386/i386/db_trace.c optional ddb
i386/i386/elan-mmcr.c optional cpu_elan | cpu_soekris
i386/i386/elf_machdep.c standard
i386/i386/exception.s standard
i386/i386/gdb_machdep.c optional gdb
i386/i386/geode.c optional cpu_geode
i386/i386/i686_mem.c optional mem
i386/i386/in_cksum.c optional inet | inet6
i386/i386/initcpu.c standard
i386/i386/io.c optional io
i386/i386/k6_mem.c optional mem
i386/i386/locore.s standard no-obj
i386/i386/longrun.c optional cpu_enable_longrun
i386/i386/machdep.c standard
i386/i386/mem.c optional mem
i386/i386/minidump_machdep.c standard
i386/i386/mp_clock.c optional smp
i386/i386/mp_machdep.c optional smp
i386/i386/mp_watchdog.c optional mp_watchdog smp
i386/i386/mpboot.s optional smp
i386/i386/perfmon.c optional perfmon
i386/i386/pmap.c standard
i386/i386/ptrace_machdep.c standard
i386/i386/support.s standard
i386/i386/swtch.s standard
1993-06-12 14:58:17 +00:00
i386/i386/sys_machdep.c standard
i386/i386/trap.c standard
i386/i386/uio_machdep.c standard
i386/i386/vm86.c standard
1999-06-29 16:14:20 +00:00
i386/i386/vm_machdep.c standard
i386/ibcs2/ibcs2_errno.c optional ibcs2
i386/ibcs2/ibcs2_fcntl.c optional ibcs2
i386/ibcs2/ibcs2_ioctl.c optional ibcs2
i386/ibcs2/ibcs2_ipc.c optional ibcs2
i386/ibcs2/ibcs2_isc.c optional ibcs2
i386/ibcs2/ibcs2_isc_sysent.c optional ibcs2
i386/ibcs2/ibcs2_misc.c optional ibcs2
i386/ibcs2/ibcs2_msg.c optional ibcs2
i386/ibcs2/ibcs2_other.c optional ibcs2
i386/ibcs2/ibcs2_signal.c optional ibcs2
i386/ibcs2/ibcs2_socksys.c optional ibcs2
i386/ibcs2/ibcs2_stat.c optional ibcs2
i386/ibcs2/ibcs2_sysent.c optional ibcs2
i386/ibcs2/ibcs2_sysi86.c optional ibcs2
i386/ibcs2/ibcs2_sysvec.c optional ibcs2
i386/ibcs2/ibcs2_util.c optional ibcs2
i386/ibcs2/ibcs2_xenix.c optional ibcs2
i386/ibcs2/ibcs2_xenix_sysent.c optional ibcs2
i386/ibcs2/imgact_coff.c optional ibcs2
i386/isa/elink.c optional ep | ie
i386/isa/npx.c optional npx
i386/isa/pmtimer.c optional pmtimer
i386/isa/prof_machdep.c optional profiling-routine
i386/isa/spic.c optional spic
i386/linux/imgact_linux.c optional compat_linux
i386/linux/linux_dummy.c optional compat_linux
i386/linux/linux_machdep.c optional compat_linux
i386/linux/linux_ptrace.c optional compat_linux
2007-10-25 14:16:07 +00:00
i386/linux/linux_support.s optional compat_linux \
dependency "linux_assym.h"
i386/linux/linux_sysent.c optional compat_linux
i386/linux/linux_sysvec.c optional compat_linux
i386/pci/pci_cfgreg.c optional pci
2012-09-12 19:36:54 +00:00
i386/pci/pci_pir.c optional pci
2007-10-25 14:16:07 +00:00
i386/svr4/svr4_locore.s optional compat_svr4 \
dependency "svr4_assym.h" \
warning "COMPAT_SVR4 is broken and should be avoided"
i386/svr4/svr4_machdep.c optional compat_svr4
2000-10-09 13:41:07 +00:00
#
isa/syscons_isa.c optional sc
isa/vga_isa.c optional vga
kern/kern_clocksource.c standard
kern/imgact_aout.c optional compat_aout
kern/imgact_gzip.c optional gzip
kern/subr_sfbuf.c standard
libkern/divdi3.c standard
libkern/ffsll.c standard
libkern/flsll.c standard
libkern/memmove.c standard
2007-04-06 11:29:52 +00:00
libkern/memset.c standard
libkern/moddi3.c standard
libkern/qdivrem.c standard
libkern/ucmpdi2.c standard
libkern/udivdi3.c standard
libkern/umoddi3.c standard
2007-10-25 14:16:07 +00:00
i386/xbox/xbox.c optional xbox
i386/xbox/xboxfb.c optional xboxfb
dev/fb/boot_font.c optional xboxfb
i386/xbox/pic16l.s optional xbox
#
# x86 real mode BIOS support, required by dpms/pci/vesa
#
compat/x86bios/x86bios.c optional x86bios | dpms | pci | vesa
#
# bvm console
#
dev/bvm/bvm_console.c optional bvmconsole
dev/bvm/bvm_dbg.c optional bvmdebug
#
# x86 shared code between IA32, AMD64 and PC98 architectures
#
x86/acpica/OsdEnvironment.c optional acpi
x86/acpica/acpi_apm.c optional acpi
x86/acpica/acpi_wakeup.c optional acpi
x86/acpica/madt.c optional acpi apic
x86/acpica/srat.c optional acpi
x86/bios/smbios.c optional smbios
x86/bios/vpd.c optional vpd
x86/cpufreq/est.c optional cpufreq
x86/cpufreq/hwpstate.c optional cpufreq
x86/cpufreq/p4tcc.c optional cpufreq
x86/cpufreq/powernow.c optional cpufreq
x86/cpufreq/smist.c optional cpufreq
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
x86/iommu/busdma_dmar.c optional acpi acpi_dmar pci
x86/iommu/intel_ctx.c optional acpi acpi_dmar pci
x86/iommu/intel_drv.c optional acpi acpi_dmar pci
x86/iommu/intel_fault.c optional acpi acpi_dmar pci
x86/iommu/intel_gas.c optional acpi acpi_dmar pci
x86/iommu/intel_idpgtbl.c optional acpi acpi_dmar pci
Use VT-d interrupt remapping block (IR) to perform FSB messages translation. In particular, despite IO-APICs only take 8bit apic id, IR translation structures accept 32bit APIC Id, which allows x2APIC mode to function properly. Extend msi_cpu of struct msi_intrsrc and io_cpu of ioapic_intsrc to full int from one byte. KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid bringing all dmar headers into interrupt code. The non-PCI(e) devices which generate message interrupts on FSB require special handling. The HPET FSB interrupts are remapped, while DMAR interrupts are not. For each msi and ioapic interrupt source, the iommu cookie is added, which is in fact index of the IRE (interrupt remap entry) in the IR table. Cookie is made at the source allocation time, and then used at the map time to fill both IRE and device registers. The MSI address/data registers and IO-APIC redirection registers are programmed with the special values which are recognized by IR and used to restore the IRE index, to find proper delivery mode and target. Map all MSI interrupts in the block when msi_map() is called. Since an interrupt source setup and dismantle code are done in the non-sleepable context, flushing interrupt entries cache in the IR hardware, which is done async and ideally waits for the interrupt, requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is modified to take a boolean argument requesting busy-wait for the written sequence number instead of waiting for interrupt. Some interrupts are configured before IR is initialized, e.g. ACPI SCI. Add intr_reprogram() function to reprogram all already configured interrupts, and call it immediately before an IR unit is enabled. There is still a small window after the IO-APIC redirection entry is reprogrammed with cookie but before the unit is enabled, but to fix this properly, IR must be started much earlier. Add workarounds for 5500 and X58 northbridges, some revisions of which have severe flaws in handling IR. Use the same identification methods as employed by Linux. Review: https://reviews.freebsd.org/D1892 Reviewed by: neel Discussed with: jhb Tested by: glebius, pho (previous versions) Sponsored by: The FreeBSD Foundation MFC after: 3 weeks
2015-03-19 13:57:47 +00:00
x86/iommu/intel_intrmap.c optional acpi acpi_dmar pci
x86/iommu/intel_qi.c optional acpi acpi_dmar pci
Import the driver for VT-d DMAR hardware, as specified in the revision 1.3 of Intelб╝ Virtualization Technology for Directed I/O Architecture Specification. The Extended Context and PASIDs from the rev. 2.2 are not supported, but I am not aware of any released hardware which implements them. Code does not use queued invalidation, see comments for the reason, and does not provide interrupt remapping services. Code implements the management of the guest address space per domain and allows to establish and tear down arbitrary mappings, but not partial unmapping. The superpages are created as needed, but not promoted. Faults are recorded, fault records could be obtained programmatically, and printed on the console. Implement the busdma(9) using DMARs. This busdma backend avoids bouncing and provides security against misbehaving hardware and driver bad programming, preventing leaks and corruption of the memory by wild DMA accesses. By default, the implementation is compiled into amd64 GENERIC kernel but disabled; to enable, set hw.dmar.enable=1 loader tunable. Code is written to work on i386, but testing there was low priority, and driver is not enabled in GENERIC. Even with the DMAR turned on, individual devices could be directed to use the bounce busdma with the hw.busdma.pci<domain>:<bus>:<device>:<function>.bounce=1 tunable. If DMARs are capable of the pass-through translations, it is used, otherwise, an identity-mapping page table is constructed. The driver was tested on Xeon 5400/5500 chipset legacy machine, Haswell desktop and E5 SandyBridge dual-socket boxes, with ahci(4), ata(4), bce(4), ehci(4), mfi(4), uhci(4), xhci(4) devices. It also works with em(4) and igb(4), but there some fixes are needed for drivers, which are not committed yet. Intel GPUs do not work with DMAR (yet). Many thanks to John Baldwin, who explained me the newbus integration; Peter Holm, who did all testing and helped me to discover and understand several incredible bugs; and to Jim Harris for the access to the EDS and BWG and for listening when I have to explain my findings to somebody. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2013-10-28 13:33:29 +00:00
x86/iommu/intel_quirks.c optional acpi acpi_dmar pci
x86/iommu/intel_utils.c optional acpi acpi_dmar pci
2012-09-12 19:36:54 +00:00
x86/isa/atpic.c optional atpic
x86/isa/atrtc.c standard
x86/isa/clock.c standard
x86/isa/elcr.c optional atpic | apic
x86/isa/isa.c optional isa
x86/isa/isa_dma.c optional isa
x86/isa/nmi.c standard
x86/isa/orm.c optional isa
x86/pci/pci_bus.c optional pci
x86/pci/qpi.c optional pci
Better support memory mapped console devices, such as VGA and EFI frame buffers and memory mapped UARTs. 1. Delay calling cninit() until after pmap_bootstrap(). This makes sure we have PMAP initialized enough to add translations. Keep kdb_init() after cninit() so that we have console when we need to break into the debugger on boot. 2. Unfortunately, the ATPIC code had be moved as well so as to avoid a spurious trap #30. The reason for which is not known at this time. 3. In pmap_mapdev_attr(), when we need to map a device prior to the VM system being initialized, use virtual_avail as the KVA to map the device at. In particular, avoid using the direct map on amd64 because we can't demote by virtue of not being able to allocate yet. Keep track of the translation. Re-use the translation after the VM has been initialized to not waste KVA and to satisfy the assumption in uart(4) that the handle returned for the low-level console is the same as later returned when the device is probed and attached. 4. In pmap_unmapdev() remove the mapping from the table when called pre-init. Otherwise keep the mapping. During bus probe and attach device resources are mapped and unmapped multiple times, which would have us destroy the mapping used by the low-level console. 5. In pmap_init(), set pmap_initialized to signal that we're not pre-init anymore. On amd64, bring the direct map in sync with the translations created at that time. 6. Implement bus_space_map() and bus_space_unmap() for real: when the tag corresponds to memory space, call the corresponding pmap_mapdev() and pmap_unmapdev() functions to construct and actual handle. 7. In efifb.c and vt_vga.c, remove the crutches and hacks and simply call pmap_mapdev_attr() or bus_space_map() as desired. Notes: 1. uart(4) already used bus_space_map() during low-level console setup but since serial ports have traditionally been I/O port based, the lack of a proper implementation for said function was not a problem. It has always supported memory mapped UARTs for low-level consoles by setting hw.uart.console accordingly. 2. The use of the direct map on amd64 without setting caching attributes has been a bigger problem than previously thought. This change has the fortunate (and unexpected) side-effect of fixing various EFI frame buffer problems (though not all). PR: 191564, 194952 Special thanks to: 1. XipLink, Inc -- generously donated an Intel Bay Trail E3800 based eval board (ADLE3800PC). 2. The FreeBSD Foundation, in particular emaste@ -- for UEFI support in general and testing. 3. Everyone who tested the proposed for PR 191564. 4. jhb@ and kib@ for being a soundboard and applying a clue bat if so needed.
2015-08-12 15:26:32 +00:00
x86/x86/bus_machdep.c standard
x86/x86/busdma_bounce.c standard
x86/x86/busdma_machdep.c standard
x86/x86/cpu_machdep.c standard
x86/x86/dump_machdep.c standard
x86/x86/fdt_machdep.c optional fdt
x86/x86/identcpu.c standard
x86/x86/intr_machdep.c standard
x86/x86/io_apic.c optional apic
x86/x86/legacy.c standard
x86/x86/local_apic.c optional apic
x86/x86/mca.c standard
x86/x86/mptable.c optional apic
x86/x86/mptable_pci.c optional apic pci
x86/x86/mp_x86.c optional smp
x86/x86/msi.c optional apic pci
x86/x86/nexus.c standard
x86/x86/stack_machdep.c optional ddb | stack
x86/x86/tsc.c standard
x86/x86/pvclock.c standard
x86/x86/delay.c standard
Implement vector callback for PVHVM and unify event channel implementations Re-structure Xen HVM support so that: - Xen is detected and hypercalls can be performed very early in system startup. - Xen interrupt services are implemented using FreeBSD's native interrupt delivery infrastructure. - the Xen interrupt service implementation is shared between PV and HVM guests. - Xen interrupt handlers can optionally use a filter handler in order to avoid the overhead of dispatch to an interrupt thread. - interrupt load can be distributed among all available CPUs. - the overhead of accessing the emulated local and I/O apics on HVM is removed for event channel port events. - a similar optimization can eventually, and fairly easily, be used to optimize MSI. Early Xen detection, HVM refactoring, PVHVM interrupt infrastructure, and misc Xen cleanups: Sponsored by: Spectra Logic Corporation Unification of PV & HVM interrupt infrastructure, bug fixes, and misc Xen cleanups: Submitted by: Roger Pau Monné Sponsored by: Citrix Systems R&D sys/x86/x86/local_apic.c: sys/amd64/include/apicvar.h: sys/i386/include/apicvar.h: sys/amd64/amd64/apic_vector.S: sys/i386/i386/apic_vector.s: sys/amd64/amd64/machdep.c: sys/i386/i386/machdep.c: sys/i386/xen/exception.s: sys/x86/include/segments.h: Reserve IDT vector 0x93 for the Xen event channel upcall interrupt handler. On Hypervisors that support the direct vector callback feature, we can request that this vector be called directly by an injected HVM interrupt event, instead of a simulated PCI interrupt on the Xen platform PCI device. This avoids all of the overhead of dealing with the emulated I/O APIC and local APIC. It also means that the Hypervisor can inject these events on any CPU, allowing upcalls for different ports to be handled in parallel. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: Map Xen per-vcpu area during AP startup. sys/amd64/include/intr_machdep.h: sys/i386/include/intr_machdep.h: Increase the FreeBSD IRQ vector table to include space for event channel interrupt sources. sys/amd64/include/pcpu.h: sys/i386/include/pcpu.h: Remove Xen HVM per-cpu variable data. These fields are now allocated via the dynamic per-cpu scheme. See xen_intr.c for details. sys/amd64/include/xen/hypercall.h: sys/dev/xen/blkback/blkback.c: sys/i386/include/xen/xenvar.h: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/xen/gnttab.c: Prefer FreeBSD primatives to Linux ones in Xen support code. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: sys/dev/xen/balloon/balloon.c: sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/console/xencons_ring.c: sys/dev/xen/control/control.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/dev/xen/xenpci/xenpci.c: sys/i386/i386/machdep.c: sys/i386/include/pmap.h: sys/i386/include/xen/xenfunc.h: sys/i386/isa/npx.c: sys/i386/xen/clock.c: sys/i386/xen/mp_machdep.c: sys/i386/xen/mptable.c: sys/i386/xen/xen_clock_util.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/xen_rtc.c: sys/xen/evtchn/evtchn_dev.c: sys/xen/features.c: sys/xen/gnttab.c: sys/xen/gnttab.h: sys/xen/hvm.h: sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbus_if.m: sys/xen/xenbus/xenbusb_front.c: sys/xen/xenbus/xenbusvar.h: sys/xen/xenstore/xenstore.c: sys/xen/xenstore/xenstore_dev.c: sys/xen/xenstore/xenstorevar.h: Pull common Xen OS support functions/settings into xen/xen-os.h. sys/amd64/include/xen/xen-os.h: sys/i386/include/xen/xen-os.h: sys/xen/xen-os.h: Remove constants, macros, and functions unused in FreeBSD's Xen support. sys/xen/xen-os.h: sys/i386/xen/xen_machdep.c: sys/x86/xen/hvm.c: Introduce new functions xen_domain(), xen_pv_domain(), and xen_hvm_domain(). These are used in favor of #ifdefs so that FreeBSD can dynamically detect and adapt to the presence of a hypervisor. The goal is to have an HVM optimized GENERIC, but more is necessary before this is possible. sys/amd64/amd64/machdep.c: sys/dev/xen/xenpci/xenpcivar.h: sys/dev/xen/xenpci/xenpci.c: sys/x86/xen/hvm.c: sys/sys/kernel.h: Refactor magic ioport, Hypercall table and Hypervisor shared information page setup, and move it to a dedicated HVM support module. HVM mode initialization is now triggered during the SI_SUB_HYPERVISOR phase of system startup. This currently occurs just after the kernel VM is fully setup which is just enough infrastructure to allow the hypercall table and shared info page to be properly mapped. sys/xen/hvm.h: sys/x86/xen/hvm.c: Add definitions and a method for configuring Hypervisor event delievery via a direct vector callback. sys/amd64/include/xen/xen-os.h: sys/x86/xen/hvm.c: sys/conf/files: sys/conf/files.amd64: sys/conf/files.i386: Adjust kernel build to reflect the refactoring of early Xen startup code and Xen interrupt services. sys/dev/xen/blkback/blkback.c: sys/dev/xen/blkfront/blkfront.c: sys/dev/xen/blkfront/block.h: sys/dev/xen/control/control.c: sys/dev/xen/evtchn/evtchn_dev.c: sys/dev/xen/netback/netback.c: sys/dev/xen/netfront/netfront.c: sys/xen/xenstore/xenstore.c: sys/xen/evtchn/evtchn_dev.c: sys/dev/xen/console/console.c: sys/dev/xen/console/xencons_ring.c Adjust drivers to use new xen_intr_*() API. sys/dev/xen/blkback/blkback.c: Since blkback defers all event handling to a taskqueue, convert this task queue to a "fast" taskqueue, and schedule it via an interrupt filter. This avoids an unnecessary ithread context switch. sys/xen/xenstore/xenstore.c: The xenstore driver is MPSAFE. Indicate as much when registering its interrupt handler. sys/xen/xenbus/xenbus.c: sys/xen/xenbus/xenbusvar.h: Remove unused event channel APIs. sys/xen/evtchn.h: Remove all kernel Xen interrupt service API definitions from this file. It is now only used for structure and ioctl definitions related to the event channel userland device driver. Update the definitions in this file to match those from NetBSD. Implementing this interface will be necessary for Dom0 support. sys/xen/evtchn/evtchnvar.h: Add a header file for implemenation internal APIs related to managing event channels event delivery. This is used to allow, for example, the event channel userland device driver to access low-level routines that typical kernel consumers of event channel services should never access. sys/xen/interface/event_channel.h: sys/xen/xen_intr.h: Standardize on the evtchn_port_t type for referring to an event channel port id. In order to prevent low-level event channel APIs from leaking to kernel consumers who should not have access to this data, the type is defined twice: Once in the Xen provided event_channel.h, and again in xen/xen_intr.h. The double declaration is protected by __XEN_EVTCHN_PORT_DEFINED__ to ensure it is never declared twice within a given compilation unit. sys/xen/xen_intr.h: sys/xen/evtchn/evtchn.c: sys/x86/xen/xen_intr.c: sys/dev/xen/xenpci/evtchn.c: sys/dev/xen/xenpci/xenpcivar.h: New implementation of Xen interrupt services. This is similar in many respects to the i386 PV implementation with the exception that events for bound to event channel ports (i.e. not IPI, virtual IRQ, or physical IRQ) are further optimized to avoid mask/unmask operations that aren't necessary for these edge triggered events. Stubs exist for supporting physical IRQ binding, but will need additional work before this implementation can be fully shared between PV and HVM. sys/amd64/amd64/mp_machdep.c: sys/i386/i386/mp_machdep.c: sys/i386/xen/mp_machdep.c sys/x86/xen/hvm.c: Add support for placing vcpu_info into an arbritary memory page instead of using HYPERVISOR_shared_info->vcpu_info. This allows the creation of domains with more than 32 vcpus. sys/i386/i386/machdep.c: sys/i386/xen/clock.c: sys/i386/xen/xen_machdep.c: sys/i386/xen/exception.s: Add support for new event channle implementation.
2013-08-29 19:52:18 +00:00
x86/xen/hvm.c optional xenhvm
x86/xen/xen_intr.c optional xenhvm
x86/xen/xen_apic.c optional xenhvm
x86/xen/xenpv.c optional xenhvm
x86/xen/xen_nexus.c optional xenhvm
x86/xen/xen_msi.c optional xenhvm