d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
caf144a280
freebsd-dev/sys/modules/Makefile

838 lines
12 KiB
Makefile
Raw Normal View History

$Id$ -> $FreeBSD$
1999-08-28 01:08:13 +00:00
# $FreeBSD$
Per discussion on the mailing-lists, move LKMs from /sbin to /lkm, and arrange for that directory to get created by mtree. Also, process secure directory after all the others, because the programs there may overlay ones installed from the main part of the tree.
1994-09-16 20:24:29 +00:00
Reimplementation of world/kernel build options. For details, see: http://lists.freebsd.org/pipermail/freebsd-current/2006-March/061725.html The src.conf(5) manpage is to follow in a few days. Brought to you by: imp, jhb, kris, phk, ru (all bugs are mine)
2006-03-17 18:54:44 +00:00
.include <bsd.own.mk>
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
# Modules that include binary-only blobs of microcode should be selectable by
# MK_SOURCELESS_UCODE option (see below).
Only build filemon(4) on x86.
2012-06-05 17:44:54 +00:00
SUBDIR= \
${_3dfx} \
Take the functionality contained in the former "options TDFX_LINUX" into a separate module. Accordingly, convert the option into a device named similarly. Note for MFC: Perhaps the option should stay in RELENG_6 for POLA reasons. Suggested by: scottl Reviewed by: cokane MFC after: 5 days
2006-03-03 21:37:38 +00:00
${_3dfx_linux} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_aac} \
accf_data \
Add an accept filter for TCP based DNS requests. It waits until the whole first request is present before returning from accept.
2008-07-18 14:44:51 +00:00
accf_dns \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
accf_http \
Add module building Makefile entries for NFSv4 and POSIX.1e ACL handling.
2012-03-13 20:28:42 +00:00
acl_nfs4 \
acl_posix1e \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_acpi} \
- Add driver for Attansic L2 FastEthernet controller found on Asus EeePC and some Asus mainboards. Reviewed by: yongari, rpaulo, jhb Tested by: many Approved by: kib (mentor) MFC after: 1 week
2008-10-03 10:31:31 +00:00
ae \
Crypto(4) driver for AESNI. The aeskeys_{amd64,i386}.S content was mostly obtained from OpenBSD, no objections to the license from core. Hardware provided by: Sentex Communications Tested by: fabient, pho (previous versions) MFC after: 1 month
2010-07-23 11:00:46 +00:00
${_aesni} \
Hook up age(4) to the build.
2008-05-19 01:53:47 +00:00
age \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_agp} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
aha \
Add ahb module for i386 and alpha (the onlt two platforms that have eisa bus)
2004-06-29 21:20:17 +00:00
${_ahb} \
Separate the parallel scsi knowledge out of the core of the XPT, and modularize it so that new transports can be created. Add a transport for SATA Add a periph+protocol layer for ATA Add a driver for AHCI-compliant hardware. Add a maxio field to CAM so that drivers can advertise their max I/O capability. Modify various drivers so that they are insulated from the value of MAXPHYS. The new ATA/SATA code supports AHCI-compliant hardware, and will override the classic ATA driver if it is loaded as a module at boot time or compiled into the kernel. The stack now support NCQ (tagged queueing) for increased performance on modern SATA drives. It also supports port multipliers. ATA drives are accessed via 'ada' device nodes. ATAPI drives are accessed via 'cd' device nodes. They can all be enumerated and manipulated via camcontrol, just like SCSI drives. SCSI commands are not translated to their ATA equivalents; ATA native commands are used throughout the entire stack, including camcontrol. See the camcontrol manpage for further details. Testing this code may require that you update your fstab, and possibly modify your BIOS to enable AHCI functionality, if available. This code is very experimental at the moment. The userland ABI/API has changed, so applications will need to be recompiled. It may change further in the near future. The 'ada' device name may also change as more infrastructure is completed in this project. The goal is to eventually put all CAM busses and devices until newbus, allowing for interesting topology and management options. Few functional changes will be seen with existing SCSI/SAS/FC drivers, though the userland ABI has still changed. In the future, transports specific modules for SAS and FC may appear in order to better support the topologies and capabilities of these technologies. The modularization of CAM and the addition of the ATA/SATA modules is meant to break CAM out of the mold of being specific to SCSI, letting it grow to be a framework for arbitrary transports and protocols. It also allows drivers to be written to support discrete hardware without jeopardizing the stability of non-related hardware. While only an AHCI driver is provided now, a Silicon Image driver is also in the works. Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware is possible and encouraged. Help with new transports is also encouraged. Submitted by: scottl, mav Approved by: re
2009-07-10 08:18:08 +00:00
ahci \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_aic} \
Hook the aic7xxx modules up. This requires some extra care since aicasm is a compiler tool and needs to be compiled by the host compiler. I've tested this in i386->sparc cross-build, 4.7->current upgrade, normal buildkernel target, and normal /sys/i386/compile/GENERIC configurations. Submitted by: ru
2002-11-03 23:48:14 +00:00
aic7xxx \
Make AIO a loadable module. Remove the explicit call to aio_proc_rundown() from exit1(), instead AIO will use at_exit(9). Add functions at_exec(9), rm_at_exec(9) which function nearly the same as at_exec(9) and rm_at_exec(9), these functions are called on behalf of modules at the time of execve(2) after the image activator has run. Use a modified version of tegge's suggestion via at_exec(9) to close an exploitable race in AIO. Fix SYSCALL_MODULE_HELPER such that it's archetecuterally neutral, the problem was that one had to pass it a paramater indicating the number of arguments which were actually the number of "int". Fix it by using an inline version of the AS macro against the syscall arguments. (AS should be available globally but we'll get to that later.) Add a primative system for dynamically adding kqueue ops, it's really not as sophisticated as it should be, but I'll discuss with jlemon when he's around.
2001-12-29 07:13:47 +00:00
aio \
Add alc(4), a driver for Atheros AR8131/AR8132 PCIe ethernet controller. These controllers are also known as L1C(AR8131) and L2C(AR8132) respectively. These controllers resembles the first generation controller L1 but usage of different descriptor format and new register mappings over L1 register space requires a new driver. There are a couple of registers I still don't understand but the driver seems to have no critical issues for performance and stability. Currently alc(4) supports the following hardware features. o MSI o TCP Segmentation offload o Hardware VLAN tag insertion/stripping o Tx/Rx interrupt moderation o Hardware statistics counters(dev.alc.%d.stats) o Jumbo frame o WOL AR8131/AR8132 also supports Tx checksum offloading but I disabled it due to stability issues. I'm not sure this comes from broken sample boards or hardware bugs. If you know your controller works without problems you can still enable it. The controller has a silicon bug for Rx checksum offloading, so the feature was not implemented. I'd like to say big thanks to Atheros. Atheros kindly sent sample boards to me and answered several questions I had. HW donated by: Atheros Communications, Inc.
2009-06-10 02:07:58 +00:00
alc \
Add ale(4), a driver for Atheros AR8121/AR8113/AR8114 PCIe ethernet controller. The controller is also known as L1E(AR8121) and L2E(AR8113/AR8114). Unlike its predecessor Attansic L1, AR8121/AR8113/AR8114 uses completely different Rx logic such that it requires separate driver. Datasheet for AR81xx is not available to open source driver writers but it shares large part of Tx and PHY logic of L1. I still don't understand some part of register meaning and some MAC statistics counters but the driver seems to have no critical issues for performance and stability. The AR81xx requires copy operation to pass received frames to upper stack such that ale(4) consumes a lot of CPU cycles than that of other controller. A couple of silicon bugs also adds more CPU cycles to address the known hardware bug. However, if you have fast CPU you can still saturate the link. Currently ale(4) supports the following hardware features. - MSI. - TCP Segmentation offload. - Hardware VLAN tag insertion/stripping with checksum offload. - Tx TCP/UDP checksum offload and Rx IP/TCP/UDP checksum offload. - Tx/Rx interrupt moderation. - Hardware statistics counters. - Jumbo frame. - WOL. AR81xx PCIe ethernet controllers are mainly found on ASUS EeePC or P5Q series of ASUS motherboards. Special thanks to Jeremy Chadwick who sent the hardware to me. Without his donation writing a driver for AR81xx would never have been possible. Big thanks to all people who reported feedback or tested patches. HW donated by: koitsu Tested by: bsam, Joao Barros <joao.barros <> gmail DOT com > Jan Henrik Sylvester <me <> janh DOT de > Ivan Brawley < ivan <> brawley DOT id DOT au >, CURRENT ML
2008-11-12 09:52:06 +00:00
ale \
Add support for ALQ(9) to be compiled and loaded as a kernel module. Sponsored by: FreeBSD Foundation Reviewed by: dwmalone, jeff, rpaulo, rwatson Approved by: kmacy (mentor) MFC after: 1 month
2010-03-31 03:58:57 +00:00
alq \
amdsbwd: new driver for AMD SB600/SB7xx watchdog timer The hardware is compliant with WDRT specification, so I originally considered including generic WDRT watchdog support, but decided against it, because I couldn't find anyone to the code for me. WDRT seems to be not very popular. Besides, generic WDRT porbably requires a slightly different driver approach. Reviewed by: des, gavin, rpaulo MFC after: 3 weeks
2009-11-30 11:44:03 +00:00
${_amdsbwd} \
minor: fix sorting of some amd* entries in some makefiles MFC after: 1 week
2009-10-20 13:22:54 +00:00
${_amdtemp} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
amr \
an driver not endian clean, so don't enable on sparc64
2006-02-05 17:38:28 +00:00
${_an} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_aout} \
${_apm} \
Glue the arcmsr driver into the tree.
2005-03-31 20:21:43 +00:00
${_arcmsr} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_arcnet} \
Connect asmc to the build infrastructure. Approved by: njl (mentor) Reviewed by: njl (mentor)
2007-11-07 20:08:15 +00:00
${_asmc} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_asr} \
This is the much rumoured ATA mkIII update that I've been working on. o ATA is now fully newbus'd and split into modules. This means that on a modern system you just load "atapci and ata" to get the base support, and then one or more of the device subdrivers "atadisk atapicd atapifd atapist ataraid". All can be loaded/unloaded anytime, but for obvious reasons you dont want to unload atadisk when you have mounted filesystems. o The device identify part of the probe has been rewritten to fix the problems with odd devices the old had, and to try to remove so of the long delays some HW could provoke. Also probing is done without the need for interrupts, making earlier probing possible. o SATA devices can be hot inserted/removed and devices will be created/ removed in /dev accordingly. NOTE: only supported on controllers that has this feature: Promise and Silicon Image for now. On other controllers the usual atacontrol detach/attach dance is still needed. o Support for "atomic" composite ATA requests used for RAID. o ATA RAID support has been rewritten and and now supports these metadata formats: "Adaptec HostRAID" "Highpoint V2 RocketRAID" "Highpoint V3 RocketRAID" "Intel MatrixRAID" "Integrated Technology Express" "LSILogic V2 MegaRAID" "LSILogic V3 MegaRAID" "Promise FastTrak" "Silicon Image Medley" "FreeBSD PseudoRAID" o Update the ioctl API to match new RAID levels etc. o Update atacontrol to know about the new RAID levels etc NOTE: you need to recompile atacontrol with the new sys/ata.h, make world will take care of that. NOTE2: that rebuild is done differently from the old system as the rebuild is now done piggybacked on read requests to the array, so atacontrol simply starts a background "dd" to rebuild the array. o The reinit code has been worked over to be much more robust. o The timeout code has been overhauled for races. o Support of new chipsets. o Lots of fixes for bugs found while doing the modulerization and reviewing the old code. Missing or changed features from current ATA: o atapi-cd no longer has support for ATAPI changers. Todays its much cheaper and alot faster to copy those CD images to disk and serve them from there. Besides they dont seem to be made anymore, maybe for that exact reason. o ATA RAID can only read metadata from all the above metadata formats, not write all of them (Promise and Highpoint V2 so far). This means that arrays can be picked up from the BIOS, but they cannot be created from FreeBSD. There is more to it than just the missing write metadata support, those formats are not unique to a given controller like Promise and Highpoint formats, instead they exist for several types, and even worse, some controllers can have different formats and its impossible to tell which one. The outcome is that we cannot reliably create the metadata of those formats and be sure the controller BIOS will understand it. However write support is needed to update/fail/rebuild the arrays properly so it sits fairly high on the TODO list. o So far atapicam is not supported with these changes. When/if this will change is up to the maintainer of atapi-cam so go there for questions. HW donated by: Webveveriet AS HW donated by: Frode Nordahl HW donated by: Yahoo! HW donated by: Sentex Patience by: Vife and my boys (and even the cats)
2005-03-30 12:03:40 +00:00
ata \
Switch to ath hal source code. Note this removes the ath_hal module; the ath module now brings in the hal support. Kernel config files are almost backwards compatible; supplying device ath_hal gives you the same chip support that the binary hal did but you must also include options AH_SUPPORT_AR5416 to enable the extended format descriptors used by 11n parts. It is now possible to control the chip support included in a build by specifying exactly which chips are to be supported in the config file; consult ath_hal(4) for information.
2008-12-01 16:53:01 +00:00
ath \
Break out the ath PCI logic into a separate device/module. Introduce the AHB glue for Atheros embedded systems. Right now it's hard-coded for the AR9130 chip whose support isn't yet in this HAL; it'll be added in a subsequent commit. Kernel configuration files now need both 'ath' and 'ath_pci' devices; both modules need to be loaded for the ath device to work.
2011-03-31 08:07:13 +00:00
ath_pci \
Port NetBSD auxio driver. The driver was modified to use led(4) and can be used to announce various system activity. The auxio device provides auxiliary I/O functions and is found on various SBus/EBus UltraSPARC models. At present, only front panel LED is controlled by this driver. Approved by: jake (mentor) Reviewed by: joerg Tested by: joerg
2004-10-09 07:31:03 +00:00
${_auxio} \
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
${_bce} \
Add a device driver for the Broadcom BCM4401 ethernet controller, written by Stuart Walsh and Duncan Barclay (with some kibbitzing by me). I'm checking it in on Stuart's behalf. The BCM4401 is built into several x86 laptop and desktop systems. For the moment, I have only enabled it in the x86 kernel config because although it's a PCI device, I haven't heard of any standalone NICs that use it. If somebody knows of one, we can easily add it to the other arches. This driver uses register/structure data gleaned from the Linux driver released by Broadcom, but does not contain any of the code from the Linux driver itself. It uses busdma.
2003-09-09 18:17:23 +00:00
bfe \
Add device driver support for the Broadcom BCM570x family of gigabit ethernet controllers. This adds support for the 3Com 3c996-T, the SysKonnect SK-9D21 and SK-9D41, and the built-in gigE NICs on Dell PowerEdge 2550 servers. The latter configuration hauls ass: preliminary measurements show TCP speeds of over 900Mbps using only normal size frames. TCP/IP checksum offload, jumbo frames and VLAN tag insertion/stripping are supported, as well as interrupt moderation. Still need to fix autonegotiation support for 1000baseSX NICs, but beyond that, driver is pretty solid.
2001-09-27 23:55:28 +00:00
bge \
- Added bxe(4) driver for i386 and amd64. Currently untested on other CPU architectures. MFC after: One week
2011-04-25 21:53:41 +00:00
${_bxe} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_bios} \
${_bktr} \
Add support for the Apple Big Mac (BMAC) Ethernet controller, found on various Apple G3 models. Submitted by: Nathan Whitehorn
2008-06-07 22:58:32 +00:00
${_bm} \
Hook bridgestp up to the build.
2006-07-26 22:10:10 +00:00
bridgestp \
bce, bwi, bwn, mfi, mpt and siba_bwn all now compile that arm and mips have added a BUS_SPACE_UNSPECIFIED definition. Add them back to the mix on these platforms.
2010-04-12 18:28:08 +00:00
bwi \
bwn \
Moved the cam and cd9660 modules to the MI list. Don't build msdosfs or syscons on sparc64; msdosfs will likely never work, syscons needs work.
2002-10-01 19:05:18 +00:00
cam \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_canbepm} \
${_canbus} \
${_cardbus} \
- Rename if_carp.ko to carp.ko. - carp.ko depends on sha1.c
2011-12-16 14:28:34 +00:00
${_carp} \
Add cas(4), a driver for Sun Cassini/Cassini+ and National Semiconductor DP83065 Saturn Gigabit Ethernet controllers. These are the successors of the Sun GEM controllers and still have a similar but extended transmit logic. As such this driver is based on gem(4). Thanks to marcel@ for providing a Sun Quad GigaSwift Ethernet UTP (QGE) card which was vital for getting this driver to work on architectures not using Open Firmware. Approved by: re (kib) MFC after: 2 weeks
2009-06-15 18:22:41 +00:00
cas \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_cbb} \
Add build infrastructure for the forthcoming CC algorithm modules. Sponsored by: FreeBSD Foundation Submitted by: David Hayes <dahayes at swin edu au> MFC after: 3 months
2010-12-02 03:10:35 +00:00
cc \
Moved the cam and cd9660 modules to the MI list. Don't build msdosfs or syscons on sparc64; msdosfs will likely never work, syscons needs work.
2002-10-01 19:05:18 +00:00
cd9660 \
- Support for multibyte charsets in LIBICONV. - CD9660_ICONV, NTFS_ICONV and MSDOSFS_ICONV kernel options (with corresponding modules). - kiconv(3) for loadable charset conversion tables support. Submitted by: Ryuichiro Imura <imura@ryu16.org>
2003-09-26 20:26:25 +00:00
cd9660_iconv \
Attach ce(4) to the build. MFC after: 3 days
2006-01-31 23:11:35 +00:00
${_ce} \
Add a module for cfi(4). Build only for arm and powerpc, as there are only bus attachments only for these.
2011-12-30 03:48:39 +00:00
${_cfi} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_ciss} \
${_cm} \
Commit cmx(4), a driver for Omnikey CardMan 4040 PCMCIA smartcard readers. PR: kern/114582 Submitted by: Daniel Roethlisberger <daniel@roe.ch> Reviewed by: imp, myself Tested by: johans, myself MFC after: 2 weeks
2008-03-06 08:09:45 +00:00
${_cmx} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
coda \
Add support for the Coda 6.x venus<->kernel interface. This extends FIDs to be 128-bits wide and adds support for realms. Add a new CODA_COMPAT_5 option, which requests support for the old Coda 5.x interface instead of the new one. Create a new coda5.ko module that supports the 5.x interface, and make the existing coda.ko module use the new 6.x interface. These modules cannot both be loaded at the same time. Obtained from: Jan Harkes & the coda-6.0.2 distribution, NetBSD (drochner) (CODA_COMPAT_5 option).
2003-09-07 07:43:10 +00:00
coda5 \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_coff} \
Add a driver for the on-die digital thermal sensor found on Intel Core and newer CPUs (including Core 2 and Core / Core 2 based Xeons). The driver attaches to each cpu device and creates a sysctl node in that device's sysctl context (dev.cpu.N.temperature). When invoked, the handler binds to the appropriate CPU to ensure a correct reading. Submitted by: Rui Paulo <rpaulo@fnop.net> Sponsored by: Google Summer of Code 2007 Tested by: des, marcus, Constantine A. Murenin, Ian FREISLICH Approved by: re (kensmith) MFC after: 3 weeks
2007-08-15 19:26:03 +00:00
${_coretemp} \
Connect Cronyx Tau-PCI to the system.
2004-05-17 14:24:52 +00:00
${_cp} \
- Add cpuctl(4) pseudo-device driver to provide access to some low-level features of CPUs like reading/writing machine-specific registers, retrieving cpuid data, and updating microcode. - Add cpucontrol(8) utility, that provides userland access to the features of cpuctl(4). - Add subsequent manpages. The cpuctl(4) device operates as follows. The pseudo-device node cpuctlX is created for each cpu present in the systems. The pseudo-device minor number corresponds to the cpu number in the system. The cpuctl(4) pseudo- device allows a number of ioctl to be preformed, namely RDMSR/WRMSR/CPUID and UPDATE. The first pair alows the caller to read/write machine-specific registers from the correspondent CPU. cpuid data could be retrieved using the CPUID call, and microcode updates are applied via UPDATE. The permissions are inforced based on the pseudo-device file permissions. RDMSR/CPUID will be allowed when the caller has read access to the device node, while WRMSR/UPDATE will be granted only when the node is opened for writing. There're also a number of priv(9) checks. The cpucontrol(8) utility is intened to provide userland access to the cpuctl(4) device features. The utility also allows one to apply cpu microcode updates. Currently only Intel and AMD cpus are supported and were tested. Approved by: kib Reviewed by: rpaulo, cokane, Peter Jeremy MFC after: 1 month
2008-08-08 16:26:53 +00:00
${_cpuctl} \
Only compile the cpufreq driver on i386 and amd64.
2005-02-05 08:01:10 +00:00
${_cpufreq} \
Module-ize the 'core' crypto stuff. This may still need to be compiled into the kernel by default (if required), but other modules can now depend() on this. Fix inter-module dependancy. Earlier version OK'ed by: sam
2002-10-16 14:31:34 +00:00
${_crypto} \
${_cryptodev} \
Add cs module. It has built in my tree for ages, and it just never made it into FreeBSD's tree.
2005-01-26 21:27:26 +00:00
${_cs} \
Connect ctau driver (Cronyx-Tau/ISA) to modules build process. Approved by: imp (mentor)
2004-03-25 17:20:45 +00:00
${_ctau} \
Make all the modules build on arm (modulo ipfilter, which I'm looking into): o Don't build vpo and syscons on mips or arm either o Add a section for mips and arm breakages, and document why. This is easier than opting in on all the other architectures: # no BUS_SPACE_UNSPECIFIED: bce, bwi, bwn, mfi, mpt, siba_bwn # No barrier instruction support (specific to this driver): sym # no uart_cpu_$MACHINE_ARCH: uart (mips has, by inspection, the same issues as arm, so ditto for it) MFC after: 7 days
2010-03-29 17:31:55 +00:00
${_cxgb} \
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cxgbe \
Hook the DTrace kernel modules into the build.
2008-05-23 22:36:12 +00:00
${_cyclic} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
dc \
Add dumb console driver and related bits. dcons(4): very simple console and gdb port driver dcons_crom(4): FireWire attachment dconschat(8): User interface to dcons Tested with: i386, i386-PAE, and sparc64.
2003-10-24 15:44:10 +00:00
dcons \
dcons_crom \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
de \
Add a very simple dpms(4) driver that uses the VESA BIOS DPMS calls to turn off the external display during suspend and restore it to its original state on resume. MFC after: 2 weeks
2008-08-23 21:00:40 +00:00
${_dpms} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_dpt} \
${_drm} \
Enable drm2 modules build. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2012-05-23 21:07:01 +00:00
${_drm2} \
Hook the DTrace kernel modules into the build.
2008-05-23 22:36:12 +00:00
${_dtrace} \
Activate the bridge/dummynet modules. Reminded by: ru
2001-10-05 07:09:27 +00:00
dummynet \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_ed} \
${_elink} \
${_em} \
Fix the breakage introduced by rev. 1.43 of sys/dev/midway.c (don't commit on friday 13th and without making a universe). This adds struct and constant definitions for ATM traffic parameters and re-enables the build of the midway driver. Tested by: make universe
2003-06-16 13:52:27 +00:00
en \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_ep} \
Add epic(4), a driver for the front panel LEDs in Sun Fire V215/V245. It's named after the driver doing the same job in OpenSolaris.
2010-01-10 15:44:48 +00:00
${_epic} \
Add a PCI front-end to esp(4) allowing it to support AMD Am53C974 and replace amd(4) with the former in the amd64, i386 and pc98 GENERIC kernel configuration files. Besides duplicating functionality, amd(4), which previously also supported the AMD Am53C974, unlike esp(4) is no longer maintained and has accumulated enough bit rot over time to always cause a panic during boot as long as at least one target is attached to it (see PR 124667). PR: 124667 Obtained from: NetBSD (based on) MFC after: 3 days
2011-11-01 21:26:57 +00:00
esp \
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
${_et} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_ex} \
${_exca} \
${_ext2fs} \
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
${_fatm} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
fdc \
Fixed some unsorting.
2002-10-21 00:38:18 +00:00
fdescfs \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_fe} \
There's no need to make filemon specific to i386 and amd64. All LP64 architectures define elf64_freebsd_sysvec and all ILP32 architectures define elf32_freebsd_sysvec.
2012-07-02 20:36:26 +00:00
filemon \
Move firewire back to being MI.
2002-11-07 16:19:43 +00:00
firewire \
firmware(9) is a subsystem to load binary data into the kernel via a specially crafted module. There are several handrolled sollutions to this problem in the tree already which will be replaced with this. They include iwi(4), ipw(4), ispfw(4) and digi(4). No objection from: arch MFC after: 2 weeks X-MFC after: some drivers have been converted
2006-01-29 02:52:42 +00:00
firmware \
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
${_fxp} \
o Revert the part of if_gem.c rev. 1.35 which added a call to gem_stop() to gem_attach() as the former access softc members not yet initialized at that time and gem_reset() actually is enough to stop the chip. [1] o Revise the use of gem_bitwait(); add bus_barrier() calls before calling gem_bitwait() to ensure the respective bit has been written before we starting polling on it and poll for the right bits to change, f.e. even though we only reset RX we have to actually wait for both GEM_RESET_RX and GEM_RESET_TX to clear. Add some additional gem_bitwait() calls in places we've been missing them according to the GEM documentation. Along with this some excessive DELAYs, which probably only were added because of bugs in gem_bitwait() and its use in the first place, as well as as have of an gem_bitwait() reimplementation in gem_reset_tx() were removed. o Add gem_reset_rxdma() and use it to deal with GEM_MAC_RX_OVERFLOW errors more gracefully as unlike gem_init_locked() it resets the RX DMA engine only, causing no link loss and the FIFOs not to be cleared. Also use it deal with GEM_INTR_RX_TAG_ERR errors, with previously were unhandled. This was based on information obtained from the Linux GEM and OpenSolaris ERI drivers. o Turn on workarounds for silicon bugs in the Apple GMAC variants. This was based on information obtained from the Darwin GMAC and Linux GEM drivers. o Turn on "infinite" (i.e. maximum 31 * 64 bytes in length) DMA bursts. This greatly improves especially RX performance. o Optimize the RX path, this consists of: - kicking the receiver as soon as we've a spare descriptor in gem_rint() again instead of just once after all the ready ones have been handled; - kicking the receiver the right way, i.e. as outlined in the GEM documentation in batches of 4 and by pointing it to the descriptor after the last valid one; - calling gem_rint() before gem_tint() in gem_intr() as gem_tint() may take quite a while; - doubling the size of the RX ring to 256 descriptors. Overall the RX performance of a GEM in a 1GHz Sun Fire V210 was improved from ~100Mbit/s to ~850Mbit/s. o In gem_add_rxbuf() don't assign the newly allocated mbuf to rxs_mbuf before calling bus_dmamap_load_mbuf_sg(), if bus_dmamap_load_mbuf_sg() fails we'll free the newly allocated mbuf, unable to recycle the previous one but a NULL pointer dereference instead. o In gem_init_locked() honor the return value of gem_meminit(). o Simplify gem_ringsize() and dont' return garbage in the default case. Based on OpenBSD. o Don't turn on MAC control, MIF and PCS interrupts unless GEM_DEBUG is defined as we don't need/use these interrupts for operation. o In gem_start_locked() sync the DMA maps of the descriptor rings before every kick of the transmitter and not just once after enqueuing all packets as the NIC might instantly start transmitting after we kicked it the first time. o Keep state of the link state and use it to enable or disable the MAC in gem_mii_statchg() accordingly as well as to return early from gem_start_locked() in case the link is down. [3] o Initialize the maximum frame size to a sane value. o In gem_mii_statchg() enable carrier extension if appropriate. o Increment if_ierrors in case of an GEM_MAC_RX_OVERFLOW error and in gem_eint(). [3] o Handle IFF_ALLMULTI correctly; don't set it if we've turned promiscuous group mode on and don't clear the flag if we've disabled promiscuous group mode (these were mostly NOPs though). [2] o Let gem_eint() also report GEM_INTR_PERR errors. o Move setting sc_variant from gem_pci_probe() to gem_pci_attach() as device probe methods are not supposed to touch the softc. o Collapse sc_inited and sc_pci into bits for sc_flags. o Add CTASSERTs ensuring that GEM_NRXDESC and GEM_NTXDESC are set to legal values. o Correctly set up for 802.3x flow control, though #ifdef out the code that actually enables it as this needs more testing and mainly a proper framework to support it. o Correct and add some conversions from hard-coded functions names to __func__ which were borked or forgotten in if_gem.c rev. 1.42. o Use PCIR_BAR instead of a homegrown macro. o Replace sc_enaddr[6] with sc_enaddr[ETHER_ADDR_LEN]. o In gem_pci_attach() in case attaching fails release the resources in the opposite order they were allocated. o Make gem_reset() static to if_gem.c as it's not needed outside that module. o Remove the GEM_GIGABIT flag and the associated code; GEM_GIGABIT was never set and the associated code was in the wrong place. o Remove sc_mif_config; it was only used to cache the contents of the respective register within gem_attach(). o Remove the #ifdef'ed out NetBSD/OpenBSD code for establishing a suspend hook as it will never be used on FreeBSD. o Also probe Apple Intrepid 2 GMAC and Apple Shasta GMAC, add support for Apple K2 GMAC. Based on OpenBSD. o Add support for Sun GBE/P cards, or in other words actually add support for cards based on GEM to gem(4). This mainly consists of adding support for the TBI of these chips. Along with this the PHY selection code was rewritten to hardcode the PHY number for certain configurations as for example the PHY of the on-board ERI of Blade 1000 shows up twice causing no link as the second incarnation is isolated. These changes were ported from OpenBSD with some additional improvements and modulo some bugs. o Add code to if_gem_pci.c allowing to read the MAC-address from the VPD on systems without Open Firmware. This is an improved version of my variant of the respective code in if_hme_pci.c o Now that gem(4) is MI enable it for all archs. Pointed out by: yongari [1] Suggested by: rwatson [2], yongari [3] Tested on: i386 (GEM), powerpc (GMACs by marcel and yongari), sparc64 (ERI and GEM) Reviewed by: yongari Approved by: re (kensmith)
2007-09-26 21:14:18 +00:00
gem \
Add GEOM module compilation shims.
2003-05-31 18:36:41 +00:00
geom \
Add I2C bus driver for the AMD Geode LX series CS5536 Companion Device. Reviewed by: jhb (newbus bits only), adrian
2011-05-15 14:01:23 +00:00
${_glxiic} \
Add glxsb(4) driver for the Security Block in AMD Geode LX processors (as found in Soekris hardware, for instance). The hardware supports acceleration of AES-128-CBC accessible through crypto(4) and supplies entropy to random(4). TODO: o Implement rndtest(4) support o Performance enhancements Submitted by: Patrick Lamaizière <patfbsd -at- davenulle.org> Reviewed by: jhb, sam MFC after: 1 week
2008-08-09 14:52:31 +00:00
${_glxsb} \
This is a driver for Fore/Marconi HE155 and HE622 ATM cards. It is full busdma and has extensively been tested on i386 and sparc64.
2003-06-17 16:12:50 +00:00
hatm \
hookup new crypto support to the config/build process
2002-10-04 20:42:36 +00:00
hifn \
Now that hme(4) is MI build its module on all platforms. Tested by: `make universe` and powerpc cross-build on i386
2004-08-14 22:40:16 +00:00
hme \
Import the first release of HighPoint RocketRAID 27xx SAS 6Gb/s HBA card driver. This driver works for FreeBSD/i386 and FreeBSD/amd64 platforms. Many thanks to HighPoint for providing this driver. MFC after: 2 weeks
2011-12-28 23:26:58 +00:00
${_hpt27xx} \
It turns out that the hptiop driver isn't portable after all. Confine it to amd64 and i386 for now.
2007-05-09 15:55:45 +00:00
${_hptiop} \
Hook the hptmv driver up to the build.
2004-10-24 08:53:40 +00:00
${_hptmv} \
Add the 'hptrr' driver for supporting the following Highpoint RocketRAID cards: o RocketRAID 172x series o RocketRAID 174x series o RocketRAID 2210 o RocketRAID 222x series o RocketRAID 2240 o RocketRAID 230x series o RocketRAID 231x series o RocketRAID 232x series o RocketRAID 2340 o RocketRAID 2522 Many thanks to Highpoint for their continued support of FreeBSD. Submitted by: Highpoint
2007-12-15 00:56:17 +00:00
${_hptrr} \
Revert previous commit: build hwpmc(4) on all architectures. Ok'd by: jkoshy@
2005-04-20 22:03:33 +00:00
hwpmc \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_i2c} \
${_ibcs2} \
Add a driver for the watchdog timer function present on the LPC interface bridge in Intel ICH-series chipsets. The original implementation was by W. Daryl Hawkins of Texas A&M, but I have made substantial modifications.
2004-05-11 18:21:38 +00:00
${_ichwd} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_ida} \
${_ie} \
Connect if_bridge to the build. Approved by: mlaier (mentor)
2005-06-05 03:32:53 +00:00
if_bridge \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
if_disc \
Introduce a new toy interface, edsc(4). It's a discard interface imitating an Ethernet device, so vlan(4) and if_bridge(4) can be attached to it for testing and benchmarking purposes. Its source can be an introduction to the anatomy of a network interface driver due to its simplicity as well as to a bunch of comments in it.
2007-03-26 04:39:18 +00:00
if_edsc \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
if_ef \
Update epair(4) to the new netisr implementation and polish things a bit: - use dpcpu data to track the ifps with packets queued up, - per-cpu locking and driver flags - along with .nh_drainedcpu and NETISR_POLICY_CPU. - Put the mbufs in flight reference count, preventing interfaces from going away, under INVARIANTS as this is a general problem of the stack and should be solved in if.c/netisr but still good to verify the internal queuing logic. - Permit changing the MTU to virtually everythinkg like we do for loopback. Hook epair(4) up to the build. Approved by: re (kib)
2009-07-26 12:20:07 +00:00
if_epair \
Fixed some unsorting.
2002-10-21 00:38:18 +00:00
if_faith \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
if_gif \
Update carp, gre and pf module builds to be depenent on INET and/or INET6_SUPPORT. Reviewed by: gnn (slightly earlier version without pf) Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC after: 2 weeks
2011-04-30 17:59:54 +00:00
${_if_gre} \
Rename the trunk(4) driver to lagg(4) as it is too similar to vlan trunking. The name trunk is misused as the networking term trunk means carrying multiple VLANs over a single connection. The IEEE standard for link aggregation (802.3 section 3) does not talk about 'trunk' at all while it is used throughout IEEE 802.1Q in describing vlans. The lagg(4) driver provides link aggregation, failover and fault tolerance. Discussed on: current@
2007-04-17 00:35:11 +00:00
if_lagg \
Throw the switch on the new driver generation/loading mechanism. From here on in, if_ndis.ko will be pre-built as a module, and can be built into a static kernel (though it's not part of GENERIC). Drivers are created using the new ndisgen(8) script, which uses ndiscvt(8) under the covers, along with a few other tools. The result is a driver module that can be kldloaded into the kernel. A driver with foo.inf and foo.sys files will be converted into foo_sys.ko (and foo_sys.o, for those who want/need to make static kernels). This module contains all of the necessary info from the .INF file and the driver binary image, converted into an ELF module. You can kldload this module (or add it to /boot/loader.conf) to have it loaded automatically. Any required firmware files can be bundled into the module as well (or converted/loaded separately). Also, add a workaround for a problem in NdisMSleep(). During system bootstrap (cold == 1), msleep() always returns 0 without actually sleeping. The Intel 2200BG driver uses NdisMSleep() to wait for the NIC's firmware to come to life, and fails to load if NdisMSleep() doesn't actually delay. As a workaround, if msleep() (and hence ndis_thsuspend()) returns 0, use a hard DELAY() to sleep instead). This is not really the right thing to do, but we can't really do much else. At the very least, this makes the Intel driver happy. There are probably other drivers that fail in this way during bootstrap. Unfortunately, the only workaround for those is to avoid pre-loading them and kldload them once the system is running instead.
2005-04-24 20:21:22 +00:00
${_if_ndis} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
if_stf \
if_tap \
if_tun \
Attach if_vlan to the build process.
2001-09-05 23:47:46 +00:00
if_vlan \
Add igb driver to the build
2008-02-29 22:42:29 +00:00
${_igb} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_iir} \
Break out the MI part of the /dev/[k]mem and /dev/io drivers into their own directory and module, leaving the MD parts in the MD area (the MD parts _are_ part of the modules). /dev/mem and /dev/io are now loadable modules, thus taking us one step further towards a kernel created entirely out of modules. Of course, there is nothing preventing the kernel from having these statically compiled.
2004-08-01 11:40:54 +00:00
${_io} \
Fix ip_divert handling of inet and inet6 and module building some more. Properly sort the "carp" case in modules/Makefile after it was renamed. Reported by: bde (most) Reviewed by: bde MFC after: 3 days
2012-01-22 02:16:31 +00:00
${_ipdivert} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_ipfilter} \
Always use the opt_*.h options for ipfw.ko, not just when compiled into the kernel. Do not try to build the module in case of no INET support but keep #error calls for now in case we would compile it into the kernel. This should fix an issue where the module would fail to enable IPv6 support from the rc framework, but also other INET and INET6 parts being silently compiled out without giving a warning in the module case. While here garbage collect unneeded opt_*.h includes. opt_ipdn.h is not used anywhere but we need to leave the DUMMYNET entry in options for conditional inclusion in kernel so keep the file with the same name. Reported by: pluknet Reviewed by: plunket, jhb MFC After: 3 days
2011-11-04 16:24:19 +00:00
${_ipfw} \
Hook ipfw_nat to the build.
2008-02-29 22:28:18 +00:00
ipfw_nat \
Tie the ipmi driver into the i386/amd64 builds.
2006-02-13 17:56:24 +00:00
${_ipmi} \
Sort.
2007-10-15 08:26:12 +00:00
ip_mroute_mod \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_ips} \
build ipw(4) and iwi(4) modules on i386 and amd64 only.
2006-03-15 20:58:44 +00:00
${_ipw} \
- Add Intel firmwares for Intel PRO/Wireless LAN 2100/2200/2915 cards in a uuencoded format along with their respective LICENSE files. - Add new share/doc/legal directory to BSD.usr.dist mtree file. This is the place we install LICENSE files for restricted firmwares. - Teach firmware(9) and kmod.mk about licensed firmwares. Restricted firmwares won't load properly unless legal.<name>.license_ack is set to 1, either via kenv(1) or /boot/loader.conf. Reviewed by: mlaier, sam Permitted by: Intel (via Andrew Wilson) MFC after: 1 month
2007-03-02 11:42:56 +00:00
${_ipwfw} \
Add isci(4) driver for amd64 and i386 targets. The isci driver is for the integrated SAS controller in the Intel C600 (Patsburg) chipset. Source files in sys/dev/isci directory are FreeBSD-specific, and sys/dev/isci/scil subdirectory contains an OS-agnostic library (SCIL) published by Intel to control the SAS controller. This library is used primarily as-is in this driver, with some post-processing to better integrate into the kernel build environment. isci.4 and a README in the sys/dev/isci directory contain a few additional details. This driver is only built for amd64 and i386 targets. Sponsored by: Intel Reviewed by: scottl Approved by: scottl
2012-01-31 19:38:18 +00:00
${_isci} \
Attach the iscsi module build. Approved by: re
2007-07-24 16:58:18 +00:00
iscsi \
Add an isp(4) module. sbus support is only compiled in on sparc64. pci support is always compiled in.
2002-10-31 19:50:18 +00:00
isp \
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
${_ispfw} \
build ipw(4) and iwi(4) modules on i386 and amd64 only.
2006-03-15 20:58:44 +00:00
${_iwi} \
- Add Intel firmwares for Intel PRO/Wireless LAN 2100/2200/2915 cards in a uuencoded format along with their respective LICENSE files. - Add new share/doc/legal directory to BSD.usr.dist mtree file. This is the place we install LICENSE files for restricted firmwares. - Teach firmware(9) and kmod.mk about licensed firmwares. Restricted firmwares won't load properly unless legal.<name>.license_ack is set to 1, either via kenv(1) or /boot/loader.conf. Reviewed by: mlaier, sam Permitted by: Intel (via Andrew Wilson) MFC after: 1 month
2007-03-02 11:42:56 +00:00
${_iwifw} \
Intel 4965 wireless driver (derived from openbsd driver of the same name)
2008-04-29 21:36:17 +00:00
${_iwn} \
${_iwnfw} \
Follow the lead of mxgb(4) and build the module for ixgb(4). Originally it wasn't enabled since the hardware wasn't commonplace, but as 10GE hardware is becoming more widely used, building the module by default should be beneficial. Approved by: rwatson (mentor) MFC after: 2 weeks
2006-08-18 10:20:15 +00:00
${_ixgb} \
Build the ixgbe(4) and mwlfw(4) modules by default. PR: 144494 Submitted by: John Giacomoni <John.Giacomoni@LineRateSystems.com>, brucec
2010-05-12 17:30:46 +00:00
${_ixgbe} \
Hook up jme(4) to the build.
2008-05-27 01:54:45 +00:00
jme \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
joy \
kbdmux(4) keyboard multiplexer integration o Add minimal kbdmux(4) man page to the source tree (more details to follow); o Hook up kbdmux(4) to the build. This concludes the first part of the kbdmux(4) keyboard multiplexer integration. It now should be possible to use kbdmux(4), however one must configure kbdmux(4) by hand (i.e. load kbdmux(4) module and use kbdcontrol(1) to add/remove slave keyboards to/from kbdmux(4)). MFC after: 1 week
2005-07-14 23:04:23 +00:00
kbdmux \
Fix the kgssapi so that it can be loaded as a module. Currently the NFS subsystems use five of the rpcsec_gss/kgssapi entry points, but since it was not obvious which others might be useful, all nineteen were included. Basically the nineteen entry points are set in a structure called rpc_gss_entries and inline functions defined in sys/rpc/rpcsec_gss.h check for the entry points being non-NULL and then call them. A default value is returned otherwise. Requested by rwatson. Reviewed by: jhb MFC after: 2 weeks
2011-06-19 22:08:55 +00:00
kgssapi \
kgssapi_krb5 \
Add build infrastructure for Khelp modules. Sponsored by: FreeBSD Foundation Reviewed by: bz MFC after: 3 months
2011-01-24 07:50:29 +00:00
khelp \
Add kernel module support for nfslockd and krpc. Use the module system to detect (or load) kernel NLM support in rpc.lockd. Remove the '-k' option to rpc.lockd and make kernel NLM the default. A user can still force the use of the old user NLM by building a kernel without NFSLOCKD and/or removing the nfslockd.ko module.
2008-03-27 11:54:20 +00:00
krpc \
Add the ksyms(4) pseudo driver. The ksyms driver allows a process to get a quick snapshot of the kernel's symbol table including the symbols from any loaded modules (the symbols are all merged into one symbol table). Unlike like other implementations, this ksyms driver maps memory in the process memory space to store the snapshot at the time /dev/ksyms is opened. It also checks to see if the process has already a snapshot open and won't allow it to open /dev/ksyms it again until it closes first. This prevents kernel and process memory from being exhausted. Note that /dev/ksyms is used by the lockstat(1) command. Reviewed by: gallatin kib (freebsd-arch) Approved by: gnn (mentor)
2009-05-26 21:39:09 +00:00
ksyms \
Hook up le(4) to the build. For now it's only added to the sparc64 GENERIC in order to support the on-board LANCE in Ultra 1 and to the MI NOTES as it should work just fine with the AMD PCnet family of chips on all archs but is not yet meant to replace lnc(4). If a kernel includes all of le(4), lnc(4) and pcn(4) precedence is given to lnc(4)/pcn(4) for now.
2006-01-31 22:34:13 +00:00
le \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
lge \
Attach ng_nat and libalias to build.
2005-05-06 14:47:54 +00:00
libalias \
Connect libiconv to the build. Recent work by fjoe and bp has fixed smbfs. The smbfs module can now be loaded once libiconv and libmchain have been loaded, and works!
2001-12-12 10:11:16 +00:00
libiconv \
Add a facility for devices, specifically network interfaces, that require large to huge amounts of small or medium sized receive buffers. The problem with these situations is that they eat up the available DMA address space very quickly when using mbufs or even mbuf clusters. Additionally this facility provides a direct mapping between 32-bit integers and these buffers. This is needed for devices originally designed for 32-bit systems. Ususally the virtual address of the buffer is used as a handle to find the buffer as soon as it is returned by the card. This does not work for 64-bit machines and hence this mapping is needed.
2003-07-15 08:59:38 +00:00
libmbpool \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
libmchain \
lindev(4) [1] is supposed to be a collection of linux-specific pseudo devices that we also support, just not by default (thus only LINT or module builds by default). While currently there is only "/dev/full" [2], we are planning to see more in the future. We may decide to change the module/dependency logic in the future should the list grow too long. This is not part of linux.ko as also non-linux binaries like kFreeBSD userland or ports can make use of this as well. Suggested by: rwatson [1] (name) Submitted by: ed [2] Discussed with: markm, ed, rwatson, kib (weeks ago) Reviewed by: rwatson, brueffer (prev. version) PR: kern/68961 MFC after: 6 weeks
2009-09-26 12:45:28 +00:00
${_lindev} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_linprocfs} \
Add in linsysfs. A linux 2.6 like sys filesystem to pacify the Linux LSI MegaRAID SAS utility. Sponsored by: IronPort Systems Man page help from: brueffer
2006-05-09 22:27:01 +00:00
${_linsysfs} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_linux} \
Reintroduce the lmc T1/E1/T3 WAN driver. This version is locked, supports interface polling, compiles on 64-bit platforms, and compiles on NetBSD, OpenBSD, BSD/OS, and Linux. Woo! Thanks to David Boggs for providing this driver. Altq, sppp, netgraph, and bpf are required for this driver to operate. Userland tools and man pages will be committed next. Submitted by: David Boggs
2005-10-03 07:05:34 +00:00
lmc \
Add modules for lpt, plip, ppbus, ppi and pps. Submitted by: j mckitrick <jcm@freebsd-uk.eu.org>
2001-11-03 08:20:44 +00:00
lpt \
Introduce support for Mandatory Access Control and extensible kernel access control. Hook up various policy modules to the kernel build. Note that a number of these modules require futher entry point commits in the remainder of the kernel to become fully functional, but enough of the pieces are in place to allow experimentation. Note also that it would be desirable to not build the mac_*.ko modules if 'options MAC' is not defined in the kernel configuration, because the resulting modules are not useful without the kernel option. There doesn't appear to be precedent for a way to do this -- for example, we allow ipfw.ko to be built even if 'options NETINET' isn't defined. Suggests welcomed on the "best" way to do this. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-01 17:41:27 +00:00
mac_biba \
mac_bsdextended \
mac_ifoff \
Hook up the mac_lomac module build. Approved by: re Obtained from: TrustedBSD Project Sponsored by: DARPA, Network Associates Laboratories
2002-11-26 17:35:44 +00:00
mac_lomac \
Introduce support for Mandatory Access Control and extensible kernel access control. Hook up various policy modules to the kernel build. Note that a number of these modules require futher entry point commits in the remainder of the kernel to become fully functional, but enough of the pieces are in place to allow experimentation. Note also that it would be desirable to not build the mac_*.ko modules if 'options MAC' is not defined in the kernel configuration, because the resulting modules are not useful without the kernel option. There doesn't appear to be precedent for a way to do this -- for example, we allow ipfw.ko to be built even if 'options NETINET' isn't defined. Suggests welcomed on the "best" way to do this. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-01 17:41:27 +00:00
mac_mls \
mac_none \
Provide a simple sample labeled access control policy, mac_partition. This policy can be loaded dynamically, and assigns each process a partition number, as well as permitting processes to operate outside the partition. Processes contained in a partition can only "see" processes inside the same partition, so it's a little like jail. The partition of a user can be set using the label mechanisms in login.conf. This sample policy is a good starting point for developers wanting to learn about how to produce labeled policies, as it labels only one kernel object, the process credential. PR: Submitted by: Reviewed by: Approved by: Obtained from: TrustedBSD Project Sponsored by: DARPA, Network Associates Laboratories
2002-10-23 23:36:26 +00:00
mac_partition \
A cute yet small MAC policy that provides a simple ACL mechanism to permit users and groups to bind ports for TCP or UDP, and is intended to be combined with the recently committed support for net.inet.ip.portrange.reservedhigh. The policy is twiddled using sysctl(8). To use this module, you will need to compile in MAC support, and probably set reservedhigh to 0, then twiddle security.mac.portacl.rules to set things as desired. This policy module only restricts ports explicitly bound using bind(), not implicitly bound ports where the port number is selected by the IP stack. It appears to work properly in my local configuration, but needs more broad testing. A sample policy might be: # sysctl security.mac.portacl.rules="uid:425:tcp:80,uid:425:tcp:79" This permits uid 425 to bind TCP sockets to ports 79 and 80. Currently no distinction is made for incoming vs. outgoing ports with TCP, although that would probably be easy to add. Obtained from: TrustedBSD Project Sponsored by: DARPA, Network Associates Laboratories
2003-03-02 23:01:42 +00:00
mac_portacl \
Introduce support for Mandatory Access Control and extensible kernel access control. Hook up various policy modules to the kernel build. Note that a number of these modules require futher entry point commits in the remainder of the kernel to become fully functional, but enough of the pieces are in place to allow experimentation. Note also that it would be desirable to not build the mac_*.ko modules if 'options MAC' is not defined in the kernel configuration, because the resulting modules are not useful without the kernel option. There doesn't appear to be precedent for a way to do this -- for example, we allow ipfw.ko to be built even if 'options NETINET' isn't defined. Suggests welcomed on the "best" way to do this. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-01 17:41:27 +00:00
mac_seeotheruids \
Hook up mac_stub to the modules Makefile. Hook up mac_stub in files and options. Reference mac_stub in NOTES.
2003-08-21 16:48:39 +00:00
mac_stub \
Introduce support for Mandatory Access Control and extensible kernel access control. Hook up various policy modules to the kernel build. Note that a number of these modules require futher entry point commits in the remainder of the kernel to become fully functional, but enough of the pieces are in place to allow experimentation. Note also that it would be desirable to not build the mac_*.ko modules if 'options MAC' is not defined in the kernel configuration, because the resulting modules are not useful without the kernel option. There doesn't appear to be precedent for a way to do this -- for example, we allow ipfw.ko to be built even if 'options NETINET' isn't defined. Suggests welcomed on the "best" way to do this. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-01 17:41:27 +00:00
mac_test \
Add malo driver to the build Approved by: thompsa (mentor)
2008-04-01 01:55:19 +00:00
malo \
Turn on the mcd(4) module.
2002-10-04 07:15:34 +00:00
mcd \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
md \
Really back out rev 1.388.
2004-08-02 19:21:51 +00:00
mem \
bce, bwi, bwn, mfi, mpt and siba_bwn all now compile that arm and mips have added a BUS_SPACE_UNSPECIFIED definition. Add them back to the mix on these platforms.
2010-04-12 18:28:08 +00:00
mfi \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
mii \
mlx \
- For now, disable ofed module build unless MK_OFED is set.
2011-03-21 21:35:19 +00:00
${_mlx4} \
${_mlx4ib} \
${_mlxen} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_mly} \
Import sdhci (PCI SD Host Controller) driver. Driver supports PCI devices with class 8 and subclass 5 according to SD Host Controller Specification. Update NOTES, enable module and static build. Enable related mmc and mmcsd modules build. Discussed on: mobile@, current@
2008-10-21 20:33:40 +00:00
mmc \
mmcsd \
MFp4 (//depot/projects/mps/...) Bring in a driver for the LSI Logic MPT2 6Gb SAS controllers. This driver supports basic I/O, and works with SAS and SATA drives and expanders. Basic error recovery works (i.e. timeouts and aborts) as well. Integrated RAID isn't supported yet, and there are some known bugs. So this isn't ready for production use, but is certainly ready for testing and additional development. For the moment, new commits to this driver should go into the FreeBSD Perforce repository first (//depot/projects/mps/...) and then get merged into -current once they've been vetted. This has only been added to the amd64 GENERIC, since that is the only architecture I have tested this driver with. Submitted by: scottl Discussed with: imp, gibbs, will Sponsored by: Yahoo, Spectra Logic Corporation
2010-09-10 15:03:56 +00:00
mps \
bce, bwi, bwn, mfi, mpt and siba_bwn all now compile that arm and mips have added a BUS_SPACE_UNSPECIFIED definition. Add them back to the mix on these platforms.
2010-04-12 18:28:08 +00:00
mpt \
Compile mqueue module.
2005-11-26 12:46:01 +00:00
mqueue \
Oops. Actually connect back msdosfs to the build for every platform. Spotted by: bde
2002-10-06 08:07:40 +00:00
msdosfs \
- Support for multibyte charsets in LIBICONV. - CD9660_ICONV, NTFS_ICONV and MSDOSFS_ICONV kernel options (with corresponding modules). - kiconv(3) for loadable charset conversion tables support. Submitted by: Ryuichiro Imura <imura@ryu16.org>
2003-09-26 20:26:25 +00:00
msdosfs_iconv \
Sort SUBDIR and surrounding definitions.
2005-10-14 15:12:45 +00:00
${_mse} \
Hook up msk(4) to the build.
2006-12-13 02:37:48 +00:00
msk \
- For now, disable ofed module build unless MK_OFED is set.
2011-03-21 21:35:19 +00:00
${_mthca} \
Import mvs(4) - Marvell 88SX50XX/88SX60XX/88SX70XX/SoC SATA controllers driver for CAM ATA subsystem. This driver supports same hardware as atamarvell, ataadaptec and atamvsata drivers from ata(4), but provides many additional features, such as NCQ, PMP, etc.
2010-05-02 19:28:30 +00:00
mvs \
driver for Marvell 88W8363 Wireless LAN controller
2009-06-01 18:07:01 +00:00
mwl \
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
${_mwlfw} \
- Enable static building of mxge(4) and its firmware. - Add custom .c wrappers for the firmware, rather than the standard firmware(9) generated firmware objects to work around toolchain problems on ia64 involving linking objects produced by ld -b -binary into the kernel. - Move from using Myricom's ".dat" firmware blobs to using Myricom's zlib compressed ".h" firmware header files. This is done to facilitate the custom wrappers, and saves a fair amount of wired memory in the case where the firmware is built in, or preloaded. - Fix two compile issues in mxge which only appear on non-i386/amd64. Reviewed by: mlaier, mav (earlier version with just zlib support) Glanced at by: sam Approved by: re (kensmith)
2007-07-19 16:16:00 +00:00
mxge \
Hook up the if_my module to the build.
2003-02-27 14:49:56 +00:00
my \
Import work done under project/nand (@235533) into head. The NAND Flash environment consists of several distinct components: - NAND framework (drivers harness for NAND controllers and NAND chips) - NAND simulator (NANDsim) - NAND file system (NAND FS) - Companion tools and utilities - Documentation (manual pages) This work is still experimental. Please use with caution. Obtained from: Semihalf Supported by: FreeBSD Foundation, Juniper Networks
2012-05-17 10:11:18 +00:00
${_nandfs} \
${_nandsim} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_ncp} \
${_ncv} \
${_ndis} \
Do not build netgraph kernel modules if WITHOUT_NETGRAPH is set in src.conf Submitted by: bf MFC after: 2 weeks
2010-01-16 17:08:22 +00:00
${_netgraph} \
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
${_nfe} \
Hook up nfs_common missed in r203968. Submitted by: kib
2010-02-19 21:11:40 +00:00
nfs_common \
Add the kernel build glue for the experimental NFS subsystem that includes support for NFSv4. The subsystem can optionally be linked into the kernel using the two options: NFSCL - the client NFSD - the server It is also built as three modules: nfscl - the client nfsd - the server nfscommon - functions shared by the client and server Approved by: kib (mentor)
2009-05-28 19:45:11 +00:00
nfscl \
Cleanup and split of nfs client and server code. This builds on the top of several repo-copies.
2001-09-18 23:32:09 +00:00
nfsclient \
Add the kernel build glue for the experimental NFS subsystem that includes support for NFSv4. The subsystem can optionally be linked into the kernel using the two options: NFSCL - the client NFSD - the server It is also built as three modules: nfscl - the client nfsd - the server nfscommon - functions shared by the client and server Approved by: kib (mentor)
2009-05-28 19:45:11 +00:00
nfscommon \
nfsd \
Move sys/nfsclient/nfs_lock.c into sys/nfs and build it as a separate module that can be used by both the regular and experimental nfs clients. This fixes the problem reported by jh@ where /dev/nfslock would be registered twice when both nfs clients were used. I also defined the size of the lm_fh field to be the correct value, as it should be the maximum size of an NFSv3 file handle. Reviewed by: jh MFC after: 2 weeks
2010-07-24 22:11:11 +00:00
nfslock \
Add kernel module support for nfslockd and krpc. Use the module system to detect (or load) kernel NLM support in rpc.lockd. Remove the '-k' option to rpc.lockd and make kernel NLM the default. A user can still force the use of the old user NLM by building a kernel without NFSLOCKD and/or removing the nfslockd.ko module.
2008-03-27 11:54:20 +00:00
nfslockd \
Cleanup and split of nfs client and server code. This builds on the top of several repo-copies.
2001-09-18 23:32:09 +00:00
nfsserver \
Change nfsserver so that it uses the nfssvc() system call provided in sys/nfs/nfs_nfssvc.c by registering with it using the nfsd_call_nfsserver function pointer. Also, add the build glue for nfs_nfssvc.c optionally based on "nfsserver" and also as a loadable module. Submitted by: rmacklem Reviewed by: kib Approved by: kib (mentor)
2009-04-12 19:04:27 +00:00
nfssvc \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
nge \
nmdm \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_nsp} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
ntfs \
- Support for multibyte charsets in LIBICONV. - CD9660_ICONV, NTFS_ICONV and MSDOSFS_ICONV kernel options (with corresponding modules). - kiconv(3) for loadable charset conversion tables support. Submitted by: Ryuichiro Imura <imura@ryu16.org>
2003-09-26 20:26:25 +00:00
ntfs_iconv \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
nullfs \
Sort SUBDIR and surrounding definitions.
2005-10-14 15:12:45 +00:00
${_nve} \
Split /dev/nvram driver out of isa/clock.c for i386 and amd64. I have not refactored it to be a generic device. Instead of being part of the standard kernel, there is now a 'nvram' device for i386/amd64. It is in DEFAULTS like io and mem, and can be turned off with 'nodevice nvram'. This matches the previous behavior when it was first committed.
2007-10-26 03:23:54 +00:00
${_nvram} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_nwfs} \
Sort.
2007-10-15 08:26:12 +00:00
${_nxge} \
Hook the DTrace kernel modules into the build.
2008-05-23 22:36:12 +00:00
${_opensolaris} \
Add a driver for Emulex OneConnect ethernet cards (10 Gbit PCIe) A manpage will come in a future commit. Submitted by: Naresh Raju Gottumukkala (emulex)
2012-02-10 21:03:04 +00:00
oce \
Add VIA/ACE "PadLock" support as a crypto(9) driver. HW donated by: Mike Tancsa <mike@sentex.net> Most of the code obtained from: OpenBSD MFC after: 3 days
2005-08-18 00:30:22 +00:00
${_padlock} \
This is a driver for IDT77252 based ATM interfaces. It has been tested with a ProATM-155 and an IDT evaluation board and should also work with a ProATM-25 (it seems to work at least, I cannot really measure what the card emits). The driver has been tested on i386 and sparc64, but should work an other archs also. It supports UBR, CBR, ABR and VBR; AAL0, AAL5 and AALraw. As an additional feature VCI/VPI 0/0 can be opened for receiving in AALraw mode and receives all cells not claimed by other open VCs (even cells with invalid GFC, VPI and VCI fields and OAM cells). Thanks to Christian Bucari from ProSum for lending two cards and answering my questions.
2003-07-15 11:57:24 +00:00
patm \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_pccard} \
${_pcfclock} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
pcn \
Link pf to the build and install: This adds the former ports registered groups: proxy and authpf as well as the proxy user. Make sure to run mergemaster -p in oder to complete make installworld without errors. This also provides the passive OS fingerprints from OpenBSD (pf.os) and an example pf.conf. For those who want to go without pf; it provides a NO_PF knob to make.conf. __FreeBSD_version will be bumped soon to reflect this and to be able to change ports accordingly. Approved by: bms(mentor)
2004-03-08 22:03:29 +00:00
${_pf} \
Make pflog a seperate module. As a result pflog_packet() becomes a function pointer that is declared in pf_ioctl.c Requested by: yar (as part of the module build reorg) MFC after: 1 week X-MFC with: yar's module reorg
2006-02-05 17:17:32 +00:00
${_pflog} \
Update packet filter (pf) code to OpenBSD 4.5. You need to update userland (world and ports) tools to be in sync with the kernel. Submitted by: mlaier Submitted by: eri
2011-06-28 11:57:25 +00:00
${_pfsync} \
Add modules for lpt, plip, ppbus, ppi and pps. Submitted by: j mckitrick <jcm@freebsd-uk.eu.org>
2001-11-03 08:20:44 +00:00
plip \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_pmc} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
portalfs \
Add modules for lpt, plip, ppbus, ppi and pps. Submitted by: j mckitrick <jcm@freebsd-uk.eu.org>
2001-11-03 08:20:44 +00:00
ppbus \
Unconditionally enable ppc(4) and puc(4).
2006-06-18 05:05:46 +00:00
ppc \
Add modules for lpt, plip, ppbus, ppi and pps. Submitted by: j mckitrick <jcm@freebsd-uk.eu.org>
2001-11-03 08:20:44 +00:00
ppi \
pps \
Move the pseudofs, procfs and linprocfs modules out from the fs directory. Keeping them there seemed like a good idea at the time, but it annoys bde and confuses people who do not understand how MODULES_OVERRIDE works.
2002-02-04 20:16:50 +00:00
procfs \
pseudofs \
"pst" is not 64-bit clean for reasons specified in sys/amd64/conf/NOTES.
2005-01-27 11:07:13 +00:00
${_pst} \
Hook up the pty(4) module to the build.
2009-08-28 10:23:40 +00:00
pty \
Unconditionally enable ppc(4) and puc(4).
2006-06-18 05:05:46 +00:00
puc \
Add QLogic 10 Gigabit Ethernet & CNA Adapter Driver version 1.30 for 3200 and 8200 series cards. Submitted by: David C Somayajulu (david.somayajulu@qlogic.com), Qlogic Corporation MFC After: 3 days
2011-11-03 21:20:22 +00:00
${_qlxgb} \
Initial import of ipw, iwi, ral and ural drivers: ipw - Intel PRO/Wireless 2100 iwi - Intel PRO/Wireless 2200BG/2225BG/2915ABG ral - Ralink Technology RT2500 ural - Ralink Technology RT2500USB Approved by: silby (mentor)
2005-04-18 18:47:38 +00:00
ral \
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
${_ralfw} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
${_random} \
hookup wlan and rcv4 modules to the build Reviewed by: imp
2003-01-15 20:06:38 +00:00
rc4 \
add rdma to build for i386 and amd64
2008-05-05 20:41:54 +00:00
${_rdma} \
Take the support for the 8139C+/8169/8169S/8110S chips out of the rl(4) driver and put it in a new re(4) driver. The re(4) driver shares the if_rlreg.h file with rl(4) but is a separate module. (Ultimately I may change this. For now, it's convenient.) rl(4) has been modified so that it will never attach to an 8139C+ chip, leaving it to re(4) instead. Only re(4) has the PCI IDs to match the 8169/8169S/8110S gigE chips. if_re.c contains the same basic code that was originally bolted onto if_rl.c, with the following updates: - Added support for jumbo frames. Currently, there seems to be a limit of approximately 6200 bytes for jumbo frames on transmit. (This was determined via experimentation.) The 8169S/8110S chips apparently are limited to 7.5K frames on transmit. This may require some more work, though the framework to handle jumbo frames on RX is in place: the re_rxeof() routine will gather up frames than span multiple 2K clusters into a single mbuf list. - Fixed bug in re_txeof(): if we reap some of the TX buffers, but there are still some pending, re-arm the timer before exiting re_txeof() so that another timeout interrupt will be generated, just in case re_start() doesn't do it for us. - Handle the 'link state changed' interrupt - Fix a detach bug. If re(4) is loaded as a module, and you do tcpdump -i re0, then you do 'kldunload if_re,' the system will panic after a few seconds. This happens because ether_ifdetach() ends up calling the BPF detach code, which notices the interface is in promiscuous mode and tries to switch promisc mode off while detaching the BPF listner. This ultimately results in a call to re_ioctl() (due to SIOCSIFFLAGS), which in turn calls re_init() to handle the IFF_PROMISC flag change. Unfortunately, calling re_init() here turns the chip back on and restarts the 1-second timeout loop that drives re_tick(). By the time the timeout fires, if_re.ko has been unloaded, which results in a call to invalid code and blows up the system. To fix this, I cleared the IFF_UP flag before calling ether_ifdetach(), which stops the ioctl routine from trying to reset the chip. - Modified comments in re_rxeof() relating to the difference in RX descriptor status bit layout between the 8139C+ and the gigE chips. The layout is different because the frame length field was expanded from 12 bits to 13, and they got rid of one of the status bits to make room. - Add diagnostic code (re_diag()) to test for the case where a user has installed a broken 32-bit 8169 PCI NIC in a 64-bit slot. Some NICs have the REQ64# and ACK64# lines connected even though the board is 32-bit only (in this case, they should be pulled high). This fools the chip into doing 64-bit DMA transfers even though there is no 64-bit data path. To detect this, re_diag() puts the chip into digital loopback mode and sets the receiver to promiscuous mode, then initiates a single 64-byte packet transmission. The frame is echoed back to the host, and if the frame contents are intact, we know DMA is working correctly, otherwise we complain loudly on the console and abort the device attach. (At the moment, I don't know of any way to work around the problem other than physically modifying the board, so until/unless I can think of a software workaround, this will have do to.) - Created re(4) man page - Modified rlphy.c to allow re(4) to attach as well as rl(4). Note that this code works for the sample 8169/Marvell 88E1000 NIC that I have, but probably won't work for the 8169S/8110S chips. RealTek has sent me some sample NICs, but they haven't arrived yet. I will probably need to add an rlgphy driver to handle the on-board PHY in the 8169S/8110S (it needs special DSP initialization).
2003-09-08 02:11:25 +00:00
re \
Buid reiserifs.ko on every platforms, not only i386 and pc98. Reviewed by: mux (mentor) Approved by: re (dougb)
2005-06-21 13:01:14 +00:00
reiserfs \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
rl \
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
${_runfw} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_s3} \
${_safe} \
Resurrect the sbni(4) driver. Someone finally tested the MPSAFE patches and the driver worked ok with them. Tested by: friends of yar
2008-09-10 18:36:58 +00:00
${_sbni} \
o Add scc(4) to the build. o Add the scc(4) manpage to the build. o Update the uart(4) manpage to account for scc(4). o Update the uart(4) module build to include support for scc(4).
2006-03-30 18:39:24 +00:00
scc \
Hook up scd(4) to the build. Noticed by: ru
2003-06-23 20:52:03 +00:00
scd \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_scsi_low} \
Import sdhci (PCI SD Host Controller) driver. Driver supports PCI devices with class 8 and subclass 5 according to SD Host Controller Specification. Update NOTES, enable module and static build. Enable related mmc and mmcsd modules build. Discussed on: mobile@, current@
2008-10-21 20:33:40 +00:00
sdhci \
Re-enable module build for POSIX semaphores. Update the manual page describe loading the sem module. Approved by: silence on -arch and -standards
2006-11-11 16:49:29 +00:00
sem \
MFp4: anchie_soc2009 branch: Add kernel side support for Secure Neighbor Discovery (SeND), RFC 3971. The implementation consists of a kernel module that gets packets from the nd6 code, sends them to user space on a dedicated socket and reinjects them back for further processing. Hooks are used from nd6 code paths to divert relevant packets to the send implementation for processing in user space. The hooks are only triggered if the send module is loaded. In case no user space application is connected to the send socket, processing continues normaly as if the module would not be loaded. Unloading the module is not possible at this time due to missing nd6 locking. The native SeND socket is similar to a raw IPv6 socket but with its own, internal pseudo-protocol. Approved by: bz (mentor)
2010-08-19 11:31:03 +00:00
send \
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
${_sf} \
Limit building sfxge(4) to amd64 only to unbreak the tinderboxen. The driver should also work on (at least) i386 but hasn't been built/tested for a while. MFC after: 3 weeks
2011-11-18 11:10:14 +00:00
${_sfxge} \
Add driver for Silicon Integrated Systems SiS190/191 Fast/Gigabit Ethernet. This driver was written by Alexander Pohoyda and greatly enhanced by Nikolay Denev. I don't have these hardwares but this driver was tested by Nikolay Denev and xclin. Because SiS didn't release data sheet for this controller, programming information came from Linux driver and OpenSolaris. Unlike other open source driver for SiS190/191, sge(4) takes full advantage of TX/RX checksum offloading and does not require additional copy operation in RX handler. The controller seems to have advanced offloading features like VLAN hardware tag insertion/stripping, TCP segmentation offload(TSO) as well as jumbo frame support but these features are not available yet. Special thanks to xclin <xclin<> cs dot nctu dot edu dot tw> who sent fix for receiving VLAN oversized frames.
2010-04-14 20:45:33 +00:00
sge \
Doh! Last minute changes bites me in the butt.... Remove _ to make things build again.
2010-04-12 21:33:06 +00:00
siba_bwn \
Import the Statistical Information For TCP Research (SIFTR) kernel module into FreeBSD. SIFTR logs a range of statistics on active TCP connections to a log file, providing the ability to make highly granular measurements of TCP connection state. The tool is aimed at system administrators, developers and researchers alike. Please take it for a spin and test it out - the man page should have all the information required to get you going. Many thanks go to the Cisco University Research Program Fund at Community Foundation Silicon Valley and the FreeBSD Foundation. Their support of our work at the Centre for Advanced Internet Architectures, Swinburne University of Technology is greatly appreciated. Sponsored by: Cisco URP, FreeBSD Foundation Reviewed by: dwmalone, gnn, rpaulo Tested by: Many on freebsd-current@ and elsewhere over the years MFC after: 1 month
2010-07-03 13:32:39 +00:00
siftr \
Add `siis` CAM driver for SiliconImage SiI3124/3132/3531 SATA2 controllers. Driver supports Serial ATA and ATAPI devices, Port Multipliers (including FIS-based switching), hardware command queues (31 command per port) and Native Command Queuing. This is probably the second on popularity, after AHCI, type of SATA2 controllers, that benefits from using CAM, because of hardware command queuing support. Approved by: re (kib)
2009-07-21 12:32:46 +00:00
siis \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
sis \
sk \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_smbfs} \
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
${_sn} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_snc} \
Reintroduce the snp(4) driver. Because the TTY hooks interface was not finished when I imported the MPSAFE TTY layer, I had to disconnect the snp(4) driver. This snp(4) implementation has been sitting in my P4 branch for some time now. Unfortunately it still doesn't use the same error handling as snp(4) (returning codes through FIONREAD), but it should already be usable. I'm committing this to SVN, hoping someone else could polish off its rough edges. It's always better than having a broken driver sitting in the tree.
2008-11-05 15:04:03 +00:00
snp \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_sound} \
${_speaker} \
${_splash} \
${_sppp} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
ste \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_stg} \
Hook up stge(4) to the build.
2006-07-25 00:45:55 +00:00
stge \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_streams} \
Unbreak build by making svr4 conditional on i386.
2009-02-12 21:01:16 +00:00
${_svr4} \
Make all the modules build on arm (modulo ipfilter, which I'm looking into): o Don't build vpo and syscons on mips or arm either o Add a section for mips and arm breakages, and document why. This is easier than opting in on all the other architectures: # no BUS_SPACE_UNSPECIFIED: bce, bwi, bwn, mfi, mpt, siba_bwn # No barrier instruction support (specific to this driver): sym # no uart_cpu_$MACHINE_ARCH: uart (mips has, by inspection, the same issues as arm, so ditto for it) MFC after: 7 days
2010-03-29 17:31:55 +00:00
${_sym} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_syscons} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
sysvipc \
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
${_ti} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
tl \
Enable tmpfs unconditionally on all platforms. No one I spoke to could remember why it was x86 only, and it works just as well on at least powerpc as on x86.
2010-03-08 15:01:08 +00:00
tmpfs \
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
${_toecore} \
This depends on ACPI, so only build on i386:i386, amd64:amd64 and ia64:ia64. It can't possibly work on pc98, or any of the embedded platforms, since they lack ACPI.
2010-08-12 22:46:31 +00:00
${_tpm} \
Connect trm(4) to the build. Reviewed by: mux (mentor) Approved by: mux (mentor)
2002-10-13 18:44:26 +00:00
trm \
Added 3ware's twa. Reviewed by: ps
2004-04-27 17:57:45 +00:00
${_twa} \
Fixed some unsorting.
2002-10-21 00:38:18 +00:00
twe \
Add the 9750 SATA+SAS 6Gb/s RAID controller card driver, tws(4). Many thanks for their contiued support to FreeBSD. This is version 10.80.00.003 from codeset 10.2.1 [1] Obtained from: LSI http://kb.lsi.com/Download16574.aspx [1]
2011-10-04 21:40:25 +00:00
tws \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
tx \
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
${_txp} \
Only compile in uart_cpu_$MACHINE.c if it exists. I'm not sure how useful it will be, but we really need to be keying off something other than MACHINE for this anyway since on arm and mips we have lots of these running around (one for each SoC family)...
2010-04-13 21:32:06 +00:00
uart \
hookup new crypto support to the config/build process
2002-10-04 20:42:36 +00:00
ubsec \
Add a filesystem driver for the Universal Disk Format. For more info, see http://people.freebsd.org/~scottl/udf MFC after: when asmodai gets the backport done Prodded by: phk asmodai des
2002-04-14 16:36:49 +00:00
udf \
Add the Makefile glue for the udf_iconv module. Submitted by: imura@ryu16.org
2003-11-07 09:38:05 +00:00
udf_iconv \
When the kernel is configured without "options FFS", build UFS as a module without requiring any special build flags. Approved by: re (kib)
2009-07-05 15:25:02 +00:00
ufs \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
unionfs \
Hook up new USB modules.
2009-02-23 18:32:59 +00:00
usb \
This is a driver for the physical layer chips used in ATM interfaces. It currently supports the PMC Sierra Lite, Ultra and 622 chips and the IDT 77105. The driver handles media options and state in a consistent manner for ATM drivers. The next commit to the midway driver will make it use utopia.
2003-06-12 14:28:32 +00:00
utopia \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_vesa} \
Import virtio base, PCI front-end, and net/block/balloon drivers. Tested on Qemu/KVM, VirtualBox, and BHyVe. Currently built as modules-only on i386/amd64. Man pages not yet hooked up, pending review. Submitted by: Bryan Venteicher bryanv at daemoninthecloset dot org Reviewed by: bz MFC after: 4 weeks or so
2011-11-18 05:43:43 +00:00
${_virtio} \
Add device driver support for the VIA Networking Technologies VT6122 gigabit ethernet chip and integrated 10/100/1000 copper PHY. The vge driver has been added to GENERIC for i386, pc98 and amd64, but not to sparc or ia64 since I don't have the ability to test it there. The vge(4) driver supports VLANs, checksum offload and jumbo frames. Also added the lge(4) and nge(4) drivers to GENERIC for i386 and pc98 since I was in the neighborhood. There's no reason to leave them out anymore.
2004-09-10 20:57:46 +00:00
vge \
Add watchdog support for VIA south bridge chipset. Tested on VT8251, VX900 but CX700, VX800, VX855 should works. MFC after: 1 month Sponsored by: NETASQ
2011-12-12 09:50:33 +00:00
${_viawd} \
Add vkdb(4) man page and connect vkbd(4) to the build.
2004-11-16 17:19:04 +00:00
vkbd \
Don't build syscons, uart or vpo on PPC.
2005-02-03 06:12:43 +00:00
${_vpo} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
vr \
Add driver for DM&P Vortex86 RDC R6040 Fast Ethernet. The controller is commonly found on DM&P Vortex86 x86 SoC. The driver supports all hardware features except flow control. The flow control was intentionally disabled due to silicon bug. DM&P Electronics, Inc. provided all necessary information including sample board to write driver and answered many questions I had. Many thanks for their support of FreeBSD. H/W donated by: DM&P Electronics, Inc.
2010-12-31 00:21:41 +00:00
vte \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
vx \
Connect the vxge(4) module to the i386/amd64 build. Catcher of stupid errors: kib Approved by: re (kib)
2011-09-12 20:57:22 +00:00
${_vxge} \
Put module directories one per line so adding new modules creates readable diffs and produces less conflicts with local source trees.
2001-07-15 04:55:37 +00:00
wb \
Restore changes accidentally removed in r235537. Noticed by: avg
2012-06-04 08:40:14 +00:00
${_wbwd} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_wi} \
hookup wlan and rcv4 modules to the build Reviewed by: imp
2003-01-15 20:06:38 +00:00
wlan \
connect wlan_acl to the build Submitted by: Alexey Zelkin
2005-03-09 15:53:27 +00:00
wlan_acl \
device-independent implementation of AMRR tx rate control algorithm Obtained from: openbsd (w/ mods) MFC after: 1 month
2006-11-26 19:55:26 +00:00
wlan_amrr \
Update/new modules for net80211 and ath changes.
2004-12-08 17:38:38 +00:00
wlan_ccmp \
Multi-bss (aka vap) support for 802.11 devices. Note this includes changes to all drivers and moves some device firmware loading to use firmware(9) and a separate module (e.g. ral). Also there no longer are separate wlan_scan* modules; this functionality is now bundled into the wlan module. Supported by: Hobnob and Marvell Reviewed by: many Obtained from: Atheros (some bits)
2008-04-20 20:35:46 +00:00
wlan_rssadapt \
Update/new modules for net80211 and ath changes.
2004-12-08 17:38:38 +00:00
wlan_tkip \
wlan_wep \
wlan_xauth \
Link wpi(4) into the build. This includes: o mtree (for legal/intel_wpi) o manpage for i386/amd64 archs o module for i386/amd64 archs o NOTES for i386/amd64 archs Approved by: mlaier (comentor)
2007-11-08 22:09:37 +00:00
${_wpi} \
${_wpifw} \
Build x86bios only for i386/amd64 for now. More work is required to make these functional on other architectures, and the current code breaks sparc64 and powerpc. Spotted by: tinderbox via des
2009-09-21 23:58:29 +00:00
${_x86bios} \
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
${_xe} \
Build xfs before xl. Noticed by: pjd
2005-12-12 01:37:57 +00:00
xfs \
Connect zlib to the build. Approved by: cognet (mentor)
2006-02-27 16:50:51 +00:00
xl \
Connect ZFS to the build.
2007-04-06 02:13:30 +00:00
${_zfs} \
add zyd MFC after: 3 days
2007-10-31 18:47:04 +00:00
zlib \
Add the usb module and move the USB related modules into the generic section USB seems to compile on Alpha's as well.
1999-11-22 03:48:33 +00:00
MFtbemd: Use MACHINE_CPUARCH in preference to MACHINE_ARCH. The former is the source code location of the machine, the latter the binary output. In general, we want to use MACHINE_CPUARCH instead of MACHINE_ARCH unless we're tesitng for a specific target. The isn't even moot for i386/amd64 where there's momemntum towards a MACHINE_CPUARCH == x86, although a specific cleanup for that likely would be needed...
2010-08-23 06:13:29 +00:00
.if ${MACHINE_CPUARCH} != "powerpc" && ${MACHINE_CPUARCH} != "arm" && \
${MACHINE_CPUARCH} != "mips"
Build blank_saver.ko, fade_saver.ko and green_saver.ko on sparc64 now that they work with creator(4) and machfb(4). Reviewed by: ru (style) Approved by: re (scottl)
2005-07-10 11:47:04 +00:00
_syscons= syscons
Fix alignment in the last commit.
2005-02-03 08:07:22 +00:00
_vpo= vpo
Don't build syscons, uart or vpo on PPC.
2005-02-03 06:12:43 +00:00
.endif
Correct mips/arm elimination of sym
2010-11-13 20:28:06 +00:00
.if ${MACHINE_CPUARCH} != "arm" && ${MACHINE_CPUARCH} != "mips"
Make all the modules build on arm (modulo ipfilter, which I'm looking into): o Don't build vpo and syscons on mips or arm either o Add a section for mips and arm breakages, and document why. This is easier than opting in on all the other architectures: # no BUS_SPACE_UNSPECIFIED: bce, bwi, bwn, mfi, mpt, siba_bwn # No barrier instruction support (specific to this driver): sym # no uart_cpu_$MACHINE_ARCH: uart (mips has, by inspection, the same issues as arm, so ditto for it) MFC after: 7 days
2010-03-29 17:31:55 +00:00
# no BUS_SPACE_UNSPECIFIED
# No barrier instruction support (specific to this driver)
_sym= sym
Arm defines intr_disable() as a macro, which causes problems for cxgb. Rather than remove it for all architectures (which was a botch in r205845), remove it only for arm and mips until that can be sorted out. Pointy Hat: imp Submitted by: Navdeep Parhar MFC after: 7 days
2010-03-29 19:36:37 +00:00
# intr_disable() is a macro, causes problems
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.if ${MK_SOURCELESS_UCODE} != "no"
Arm defines intr_disable() as a macro, which causes problems for cxgb. Rather than remove it for all architectures (which was a botch in r205845), remove it only for arm and mips until that can be sorted out. Pointy Hat: imp Submitted by: Navdeep Parhar MFC after: 7 days
2010-03-29 19:36:37 +00:00
_cxgb= cxgb
Make all the modules build on arm (modulo ipfilter, which I'm looking into): o Don't build vpo and syscons on mips or arm either o Add a section for mips and arm breakages, and document why. This is easier than opting in on all the other architectures: # no BUS_SPACE_UNSPECIFIED: bce, bwi, bwn, mfi, mpt, siba_bwn # No barrier instruction support (specific to this driver): sym # no uart_cpu_$MACHINE_ARCH: uart (mips has, by inspection, the same issues as arm, so ditto for it) MFC after: 7 days
2010-03-29 17:31:55 +00:00
.endif
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.endif
Make all the modules build on arm (modulo ipfilter, which I'm looking into): o Don't build vpo and syscons on mips or arm either o Add a section for mips and arm breakages, and document why. This is easier than opting in on all the other architectures: # no BUS_SPACE_UNSPECIFIED: bce, bwi, bwn, mfi, mpt, siba_bwn # No barrier instruction support (specific to this driver): sym # no uart_cpu_$MACHINE_ARCH: uart (mips has, by inspection, the same issues as arm, so ditto for it) MFC after: 7 days
2010-03-29 17:31:55 +00:00
Reimplementation of world/kernel build options. For details, see: http://lists.freebsd.org/pipermail/freebsd-current/2006-March/061725.html The src.conf(5) manpage is to follow in a few days. Brought to you by: imp, jhb, kris, phk, ru (all bugs are mine)
2006-03-17 18:54:44 +00:00
.if ${MK_CRYPT} != "no" || defined(ALL_MODULES)
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
.if exists(${.CURDIR}/../opencrypto)
_crypto= crypto
_cryptodev= cryptodev
.endif
.if exists(${.CURDIR}/../crypto)
_random= random
.endif
Replaced hacks in sbin/Makefile,v 1.99 and usr.sbin/Makefile,v 1.217 with the NO_IPFILTER make.conf(5) knob. (So that we can "make the-rest-of-the-world" again.)
2002-03-21 09:15:39 +00:00
.endif
Update carp, gre and pf module builds to be depenent on INET and/or INET6_SUPPORT. Reviewed by: gnn (slightly earlier version without pf) Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC after: 2 weeks
2011-04-30 17:59:54 +00:00
.if (${MK_INET_SUPPORT} != "no" || ${MK_INET6_SUPPORT} != "no") || \
defined(ALL_MODULES)
- Rename if_carp.ko to carp.ko. - carp.ko depends on sha1.c
2011-12-16 14:28:34 +00:00
_carp= carp
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
_toecore= toecore
Update carp, gre and pf module builds to be depenent on INET and/or INET6_SUPPORT. Reviewed by: gnn (slightly earlier version without pf) Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC after: 2 weeks
2011-04-30 17:59:54 +00:00
.endif
Fix ip_divert handling of inet and inet6 and module building some more. Properly sort the "carp" case in modules/Makefile after it was renamed. Reported by: bde (most) Reviewed by: bde MFC after: 3 days
2012-01-22 02:16:31 +00:00
.if ${MK_INET_SUPPORT} != "no" || defined(ALL_MODULES)
_if_gre= if_gre
.endif
Reimplementation of world/kernel build options. For details, see: http://lists.freebsd.org/pipermail/freebsd-current/2006-March/061725.html The src.conf(5) manpage is to follow in a few days. Brought to you by: imp, jhb, kris, phk, ru (all bugs are mine)
2006-03-17 18:54:44 +00:00
.if ${MK_IPFILTER} != "no" || defined(ALL_MODULES)
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_ipfilter= ipfilter
Fixed some unsorting.
2002-10-21 00:38:18 +00:00
.endif
Always use the opt_*.h options for ipfw.ko, not just when compiled into the kernel. Do not try to build the module in case of no INET support but keep #error calls for now in case we would compile it into the kernel. This should fix an issue where the module would fail to enable IPv6 support from the rc framework, but also other INET and INET6 parts being silently compiled out without giving a warning in the module case. While here garbage collect unneeded opt_*.h includes. opt_ipdn.h is not used anywhere but we need to leave the DUMMYNET entry in options for conditional inclusion in kernel so keep the file with the same name. Reported by: pluknet Reviewed by: plunket, jhb MFC After: 3 days
2011-11-04 16:24:19 +00:00
.if ${MK_INET_SUPPORT} != "no" || defined(ALL_MODULES)
Fix ip_divert handling of inet and inet6 and module building some more. Properly sort the "carp" case in modules/Makefile after it was renamed. Reported by: bde (most) Reviewed by: bde MFC after: 3 days
2012-01-22 02:16:31 +00:00
_ipdivert= ipdivert
Always use the opt_*.h options for ipfw.ko, not just when compiled into the kernel. Do not try to build the module in case of no INET support but keep #error calls for now in case we would compile it into the kernel. This should fix an issue where the module would fail to enable IPv6 support from the rc framework, but also other INET and INET6 parts being silently compiled out without giving a warning in the module case. While here garbage collect unneeded opt_*.h includes. opt_ipdn.h is not used anywhere but we need to leave the DUMMYNET entry in options for conditional inclusion in kernel so keep the file with the same name. Reported by: pluknet Reviewed by: plunket, jhb MFC After: 3 days
2011-11-04 16:24:19 +00:00
_ipfw= ipfw
.endif
Import work done under project/nand (@235533) into head. The NAND Flash environment consists of several distinct components: - NAND framework (drivers harness for NAND controllers and NAND chips) - NAND simulator (NANDsim) - NAND file system (NAND FS) - Companion tools and utilities - Documentation (manual pages) This work is still experimental. Please use with caution. Obtained from: Semihalf Supported by: FreeBSD Foundation, Juniper Networks
2012-05-17 10:11:18 +00:00
.if ${MK_NAND} != "no" || defined(ALL_MODULES)
_nandfs= nandfs
_nandsim= nandsim
.endif
Do not build netgraph kernel modules if WITHOUT_NETGRAPH is set in src.conf Submitted by: bf MFC after: 2 weeks
2010-01-16 17:08:22 +00:00
.if ${MK_NETGRAPH} != "no" || defined(ALL_MODULES)
_netgraph= netgraph
.endif
Update carp, gre and pf module builds to be depenent on INET and/or INET6_SUPPORT. Reviewed by: gnn (slightly earlier version without pf) Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC after: 2 weeks
2011-04-30 17:59:54 +00:00
.if (${MK_PF} != "no" && (${MK_INET_SUPPORT} != "no" || \
${MK_INET6_SUPPORT} != "no")) || defined(ALL_MODULES)
Link pf to the build and install: This adds the former ports registered groups: proxy and authpf as well as the proxy user. Make sure to run mergemaster -p in oder to complete make installworld without errors. This also provides the passive OS fingerprints from OpenBSD (pf.os) and an example pf.conf. For those who want to go without pf; it provides a NO_PF knob to make.conf. __FreeBSD_version will be bumped soon to reflect this and to be able to change ports accordingly. Approved by: bms(mentor)
2004-03-08 22:03:29 +00:00
_pf= pf
Make pflog a seperate module. As a result pflog_packet() becomes a function pointer that is declared in pf_ioctl.c Requested by: yar (as part of the module build reorg) MFC after: 1 week X-MFC with: yar's module reorg
2006-02-05 17:17:32 +00:00
_pflog= pflog
Update packet filter (pf) code to OpenBSD 4.5. You need to update userland (world and ports) tools to be in sync with the kernel. Submitted by: mlaier Submitted by: eri
2011-06-28 11:57:25 +00:00
.if ${MK_INET_SUPPORT} != "no"
_pfsync= pfsync
.endif
Link pf to the build and install: This adds the former ports registered groups: proxy and authpf as well as the proxy user. Make sure to run mergemaster -p in oder to complete make installworld without errors. This also provides the passive OS fingerprints from OpenBSD (pf.os) and an example pf.conf. For those who want to go without pf; it provides a NO_PF knob to make.conf. __FreeBSD_version will be bumped soon to reflect this and to be able to change ports accordingly. Approved by: bms(mentor)
2004-03-08 22:03:29 +00:00
.endif
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.if ${MK_SOURCELESS_UCODE} != "no"
_bce= bce
_fatm= fatm
_fxp= fxp
_ispfw= ispfw
_mwlfw= mwlfw
_ralfw= ralfw
_runfw= runfw
_sf= sf
_sn= sn
_ti= ti
_txp= txp
.endif
MFtbemd: Use MACHINE_CPUARCH in preference to MACHINE_ARCH. The former is the source code location of the machine, the latter the binary output. In general, we want to use MACHINE_CPUARCH instead of MACHINE_ARCH unless we're tesitng for a specific target. The isn't even moot for i386/amd64 where there's momemntum towards a MACHINE_CPUARCH == x86, although a specific cleanup for that likely would be needed...
2010-08-23 06:13:29 +00:00
.if ${MACHINE_CPUARCH} == "i386"
Don't try to build i386-centric modules on non-i386 systems.
1998-11-04 17:15:07 +00:00
# XXX some of these can move to the general case when de-i386'ed
Add cardbus, cbb, ep and pccard. These can likely be moved to the MI section, but I've not had a chance to build them on other architectures recently enough to add them.
2002-09-26 05:54:24 +00:00
# XXX some of these can move now, but are untested on other architectures.
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_3dfx= 3dfx
Take the functionality contained in the former "options TDFX_LINUX" into a separate module. Accordingly, convert the option into a device named similarly. Note for MFC: Perhaps the option should stay in RELENG_6 for POLA reasons. Suggested by: scottl Reviewed by: cokane MFC after: 5 days
2006-03-03 21:37:38 +00:00
_3dfx_linux= 3dfx_linux
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_agp= agp
_aic= aic
an driver not endian clean, so don't enable on sparc64
2006-02-05 17:38:28 +00:00
_an= an
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_aout= aout
_apm= apm
_arcnet= arcnet
_bktr= bktr
- Added bxe(4) driver for i386 and amd64. Currently untested on other CPU architectures. MFC after: One week
2011-04-25 21:53:41 +00:00
_bxe= bxe
Switch from OLDCARD to NEWCARD on pc98.
2005-09-27 13:10:24 +00:00
_cardbus= cardbus
_cbb= cbb
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.if ${MK_SOURCELESS_UCODE} != "no"
Attach ce(4) to the build. MFC after: 3 days
2006-01-31 23:11:35 +00:00
_ce= ce
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.endif
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_coff= coff
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.if ${MK_SOURCELESS_UCODE} != "no"
Connect Cronyx Tau-PCI to the system.
2004-05-17 14:24:52 +00:00
_cp= cp
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.endif
- Add cpuctl(4) pseudo-device driver to provide access to some low-level features of CPUs like reading/writing machine-specific registers, retrieving cpuid data, and updating microcode. - Add cpucontrol(8) utility, that provides userland access to the features of cpuctl(4). - Add subsequent manpages. The cpuctl(4) device operates as follows. The pseudo-device node cpuctlX is created for each cpu present in the systems. The pseudo-device minor number corresponds to the cpu number in the system. The cpuctl(4) pseudo- device allows a number of ioctl to be preformed, namely RDMSR/WRMSR/CPUID and UPDATE. The first pair alows the caller to read/write machine-specific registers from the correspondent CPU. cpuid data could be retrieved using the CPUID call, and microcode updates are applied via UPDATE. The permissions are inforced based on the pseudo-device file permissions. RDMSR/CPUID will be allowed when the caller has read access to the device node, while WRMSR/UPDATE will be granted only when the node is opened for writing. There're also a number of priv(9) checks. The cpucontrol(8) utility is intened to provide userland access to the cpuctl(4) device features. The utility also allows one to apply cpu microcode updates. Currently only Intel and AMD cpus are supported and were tested. Approved by: kib Reviewed by: rpaulo, cokane, Peter Jeremy MFC after: 1 month
2008-08-08 16:26:53 +00:00
_cpuctl= cpuctl
Only compile the cpufreq driver on i386 and amd64.
2005-02-05 08:01:10 +00:00
_cpufreq= cpufreq
Enable the cs and disable the amdsmb and nfsmb on pc98.
2005-12-22 16:16:42 +00:00
_cs= cs
Hook the DTrace kernel modules into the build.
2008-05-23 22:36:12 +00:00
.if ${MK_CDDL} != "no" || defined(ALL_MODULES)
_cyclic= cyclic
.endif
Add a very simple dpms(4) driver that uses the VESA BIOS DPMS calls to turn off the external display during suspend and restore it to its original state on resume. MFC after: 2 weeks
2008-08-23 21:00:40 +00:00
_dpms= dpms
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_drm= drm
Enable drm2 modules build. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2012-05-23 21:07:01 +00:00
_drm2= drm2
Hook the DTrace kernel modules into the build.
2008-05-23 22:36:12 +00:00
.if ${MK_CDDL} != "no" || defined(ALL_MODULES)
_dtrace= dtrace
.endif
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_ed= ed
_elink= elink
_em= em
_ep= ep
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
_et= et
Switch from OLDCARD to NEWCARD on pc98.
2005-09-27 13:10:24 +00:00
_exca= exca
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_ext2fs= ext2fs
_fe= fe
Add I2C bus driver for the AMD Geode LX series CS5536 Companion Device. Reviewed by: jhb (newbus bits only), adrian
2011-05-15 14:01:23 +00:00
_glxiic= glxiic
Add glxsb(4) driver for the Security Block in AMD Geode LX processors (as found in Soekris hardware, for instance). The hardware supports acceleration of AES-128-CBC accessible through crypto(4) and supplies entropy to random(4). TODO: o Implement rndtest(4) support o Performance enhancements Submitted by: Patrick Lamaizière <patfbsd -at- davenulle.org> Reviewed by: jhb, sam MFC after: 1 week
2008-08-09 14:52:31 +00:00
_glxsb= glxsb
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_i2c= i2c
_ibcs2= ibcs2
_ie= ie
Throw the switch on the new driver generation/loading mechanism. From here on in, if_ndis.ko will be pre-built as a module, and can be built into a static kernel (though it's not part of GENERIC). Drivers are created using the new ndisgen(8) script, which uses ndiscvt(8) under the covers, along with a few other tools. The result is a driver module that can be kldloaded into the kernel. A driver with foo.inf and foo.sys files will be converted into foo_sys.ko (and foo_sys.o, for those who want/need to make static kernels). This module contains all of the necessary info from the .INF file and the driver binary image, converted into an ELF module. You can kldload this module (or add it to /boot/loader.conf) to have it loaded automatically. Any required firmware files can be bundled into the module as well (or converted/loaded separately). Also, add a workaround for a problem in NdisMSleep(). During system bootstrap (cold == 1), msleep() always returns 0 without actually sleeping. The Intel 2200BG driver uses NdisMSleep() to wait for the NIC's firmware to come to life, and fails to load if NdisMSleep() doesn't actually delay. As a workaround, if msleep() (and hence ndis_thsuspend()) returns 0, use a hard DELAY() to sleep instead). This is not really the right thing to do, but we can't really do much else. At the very least, this makes the Intel driver happy. There are probably other drivers that fail in this way during bootstrap. Unfortunately, the only workaround for those is to avoid pre-loading them and kldload them once the system is running instead.
2005-04-24 20:21:22 +00:00
_if_ndis= if_ndis
Last change was incomplete, instantiate the igb variable...
2008-02-29 22:52:59 +00:00
_igb= igb
Break out the MI part of the /dev/[k]mem and /dev/io drivers into their own directory and module, leaving the MD parts in the MD area (the MD parts _are_ part of the modules). /dev/mem and /dev/io are now loadable modules, thus taking us one step further towards a kernel created entirely out of modules. Of course, there is nothing preventing the kernel from having these statically compiled.
2004-08-01 11:40:54 +00:00
_io= io
lindev(4) [1] is supposed to be a collection of linux-specific pseudo devices that we also support, just not by default (thus only LINT or module builds by default). While currently there is only "/dev/full" [2], we are planning to see more in the future. We may decide to change the module/dependency logic in the future should the list grow too long. This is not part of linux.ko as also non-linux binaries like kFreeBSD userland or ports can make use of this as well. Suggested by: rwatson [1] (name) Submitted by: ed [2] Discussed with: markm, ed, rwatson, kib (weeks ago) Reviewed by: rwatson, brueffer (prev. version) PR: kern/68961 MFC after: 6 weeks
2009-09-26 12:45:28 +00:00
_lindev= lindev
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_linprocfs= linprocfs
Add in linsysfs. A linux 2.6 like sys filesystem to pacify the Linux LSI MegaRAID SAS utility. Sponsored by: IronPort Systems Man page help from: brueffer
2006-05-09 22:27:01 +00:00
_linsysfs= linsysfs
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_linux= linux
Separate mse driver into a core driver and a bus attachments. Separate out the ISA and CBUS (called isa on pc98) attachments. Eliminate all PC98 ifdefs in the process (the driver in pc98/pc98/mse.c was a copy of the one in i386/isa/mse.c with PC98 ifdefs). Create a module for this driver. I've tested this my PC-9821RaS40 with moused. I've not tested this on i386 because I have no InPort cards, or similar such things. NEC standardized on bus mice very early, long before ps/2 mice ports apeared, so all PC-98 machines supported by FreeBSD/pc98 have bus mice, I believe. Reviewed by: nyan-san
2004-12-12 20:05:50 +00:00
_mse= mse
- Move ofed modules into the i386 and amd64 specific sections to fix universe on other architectures.
2011-03-23 08:27:57 +00:00
.if ${MK_OFED} != "no" || defined(ALL_MODULES)
_mlx4= mlx4
_mlx4ib= mlx4ib
_mlxen= mlxen
_mthca= mthca
.endif
Extend coverage of the MK_IPX build option to the following: - <netipx> headers [1] - IPX library (libipx) - IPX support in ifconfig(8) - IPXrouted(8) - new MK_NCP option New MK_NCP build option controls: - <netncp> and <fs/nwfs> headers - NCP library (libncp) - ncplist(1) and ncplogin(1) - mount_nwfs(8) - ncp and nwfs kernel modules User knobs: WITHOUT_IPX, WITHOUT_IPX_SUPPORT, WITHOUT_NCP. [1] <netsmb/netbios.h> unconditionally uses <netipx> headers so they are still installed. This needs to be dealt with.
2006-03-20 14:24:58 +00:00
.if ${MK_NCP} != "no"
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_ncp= ncp
Extend coverage of the MK_IPX build option to the following: - <netipx> headers [1] - IPX library (libipx) - IPX support in ifconfig(8) - IPXrouted(8) - new MK_NCP option New MK_NCP build option controls: - <netncp> and <fs/nwfs> headers - NCP library (libncp) - ncplist(1) and ncplogin(1) - mount_nwfs(8) - ncp and nwfs kernel modules User knobs: WITHOUT_IPX, WITHOUT_IPX_SUPPORT, WITHOUT_NCP. [1] <netsmb/netbios.h> unconditionally uses <netipx> headers so they are still installed. This needs to be dealt with.
2006-03-20 14:24:58 +00:00
.endif
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_ncv= ncv
_ndis= ndis
_nsp= nsp
Extend coverage of the MK_IPX build option to the following: - <netipx> headers [1] - IPX library (libipx) - IPX support in ifconfig(8) - IPXrouted(8) - new MK_NCP option New MK_NCP build option controls: - <netncp> and <fs/nwfs> headers - NCP library (libncp) - ncplist(1) and ncplogin(1) - mount_nwfs(8) - ncp and nwfs kernel modules User knobs: WITHOUT_IPX, WITHOUT_IPX_SUPPORT, WITHOUT_NCP. [1] <netsmb/netbios.h> unconditionally uses <netipx> headers so they are still installed. This needs to be dealt with.
2006-03-20 14:24:58 +00:00
.if ${MK_NCP} != "no"
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_nwfs= nwfs
Extend coverage of the MK_IPX build option to the following: - <netipx> headers [1] - IPX library (libipx) - IPX support in ifconfig(8) - IPXrouted(8) - new MK_NCP option New MK_NCP build option controls: - <netncp> and <fs/nwfs> headers - NCP library (libncp) - ncplist(1) and ncplogin(1) - mount_nwfs(8) - ncp and nwfs kernel modules User knobs: WITHOUT_IPX, WITHOUT_IPX_SUPPORT, WITHOUT_NCP. [1] <netsmb/netbios.h> unconditionally uses <netipx> headers so they are still installed. This needs to be dealt with.
2006-03-20 14:24:58 +00:00
.endif
Hook the DTrace kernel modules into the build.
2008-05-23 22:36:12 +00:00
.if ${MK_CDDL} != "no" || defined(ALL_MODULES)
_opensolaris= opensolaris
.endif
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_pccard= pccard
_pcfclock= pcfclock
"pst" is not 64-bit clean for reasons specified in sys/amd64/conf/NOTES.
2005-01-27 11:07:13 +00:00
_pst= pst
add rdma to build for i386 and amd64
2008-05-05 20:41:54 +00:00
_rdma= rdma
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_safe= safe
Resurrect the sbni(4) driver. Someone finally tested the MPSAFE patches and the driver worked ok with them. Tested by: friends of yar
2008-09-10 18:36:58 +00:00
_sbni= sbni
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_scsi_low= scsi_low
_smbfs= smbfs
_sound= sound
_speaker= speaker
_splash= splash
_sppp= sppp
_stg= stg
_streams= streams
Unbreak build by making svr4 conditional on i386.
2009-02-12 21:01:16 +00:00
_svr4= svr4
Connect the vxge(4) module to the i386/amd64 build. Catcher of stupid errors: kib Approved by: re (kib)
2011-09-12 20:57:22 +00:00
_vxge= vxge
Restore changes accidentally removed in r235537. Noticed by: avg
2012-06-04 08:40:14 +00:00
_wbwd= wbwd
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_wi= wi
_xe= xe
Build ZFS on amd64 and pc98. Approved by: pjd@
2007-04-07 19:12:10 +00:00
.if ${MK_ZFS} != "no" || defined(ALL_MODULES)
_zfs= zfs
.endif
Create a MACHINE_ARCH == i386 section that first lists modules common to both i386 and pc98 and then uses MACHINE subsections to list modules specific to i386/i386 and i386/pc98.
2002-11-07 15:01:12 +00:00
.if ${MACHINE} == "i386"
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_aac= aac
_acpi= acpi
Crypto(4) driver for AESNI. The aeskeys_{amd64,i386}.S content was mostly obtained from OpenBSD, no objections to the license from core. Hardware provided by: Sentex Communications Tested by: fabient, pho (previous versions) MFC after: 1 month
2010-07-23 11:00:46 +00:00
.if ${MK_CRYPT} != "no" || defined(ALL_MODULES)
_aesni= aesni
.endif
The ahb module is not needed for pc98.
2004-06-30 13:09:13 +00:00
_ahb= ahb
amdsbwd: new driver for AMD SB600/SB7xx watchdog timer The hardware is compliant with WDRT specification, so I originally considered including generic WDRT watchdog support, but decided against it, because I couldn't find anyone to the code for me. WDRT seems to be not very popular. Besides, generic WDRT porbably requires a slightly different driver approach. Reviewed by: des, gavin, rpaulo MFC after: 3 weeks
2009-11-30 11:44:03 +00:00
_amdsbwd= amdsbwd
Rename the k8temp driver to amdtemp. MFC after: 2 weeks
2009-03-13 16:08:08 +00:00
_amdtemp= amdtemp
Don't build arcmsr on pc98. The card either won't fit/work in the pc98 machines because (a) it is PCIe or PCI-X (b) there's a BIOS that must run at boot which assumes IBM-AT compatible boot environment. Noticed by: scottl
2005-04-01 17:40:39 +00:00
_arcmsr= arcmsr
Connect asmc to the build infrastructure. Approved by: njl (mentor) Reviewed by: njl (mentor)
2007-11-07 20:08:15 +00:00
_asmc= asmc
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_asr= asr
_bios= bios
_ciss= ciss
_cm= cm
Commit cmx(4), a driver for Omnikey CardMan 4040 PCMCIA smartcard readers. PR: kern/114582 Submitted by: Daniel Roethlisberger <daniel@roe.ch> Reviewed by: imp, myself Tested by: johans, myself MFC after: 2 weeks
2008-03-06 08:09:45 +00:00
_cmx= cmx
Disable the coretemp and nvram on pc98.
2007-10-26 13:42:17 +00:00
_coretemp= coretemp
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.if ${MK_SOURCELESS_UCODE} != "no"
Connect ctau driver (Cronyx-Tau/ISA) to modules build process. Approved by: imp (mentor)
2004-03-25 17:20:45 +00:00
_ctau= ctau
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.endif
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_dpt= dpt
_ex= ex
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.if ${MK_SOURCELESS_HOST} != "no"
Import the first release of HighPoint RocketRAID 27xx SAS 6Gb/s HBA card driver. This driver works for FreeBSD/i386 and FreeBSD/amd64 platforms. Many thanks to HighPoint for providing this driver. MFC after: 2 weeks
2011-12-28 23:26:58 +00:00
_hpt27xx= hpt27xx
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.endif
It turns out that the hptiop driver isn't portable after all. Confine it to amd64 and i386 for now.
2007-05-09 15:55:45 +00:00
_hptiop= hptiop
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.if ${MK_SOURCELESS_HOST} != "no"
Hook the hptmv driver up to the build.
2004-10-24 08:53:40 +00:00
_hptmv= hptmv
Add the 'hptrr' driver for supporting the following Highpoint RocketRAID cards: o RocketRAID 172x series o RocketRAID 174x series o RocketRAID 2210 o RocketRAID 222x series o RocketRAID 2240 o RocketRAID 230x series o RocketRAID 231x series o RocketRAID 232x series o RocketRAID 2340 o RocketRAID 2522 Many thanks to Highpoint for their continued support of FreeBSD. Submitted by: Highpoint
2007-12-15 00:56:17 +00:00
_hptrr= hptrr
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.endif
Move the ichwd to i386 only.
2004-05-13 11:13:55 +00:00
_ichwd= ichwd
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_ida= ida
_iir= iir
Disable the ipmi driver on pc98.
2006-02-14 12:55:07 +00:00
_ipmi= ipmi
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_ips= ips
Don't build the ipw and iwi on pc98.
2006-03-17 13:06:19 +00:00
_ipw= ipw
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.if ${MK_SOURCELESS_UCODE} != "no"
- Add Intel firmwares for Intel PRO/Wireless LAN 2100/2200/2915 cards in a uuencoded format along with their respective LICENSE files. - Add new share/doc/legal directory to BSD.usr.dist mtree file. This is the place we install LICENSE files for restricted firmwares. - Teach firmware(9) and kmod.mk about licensed firmwares. Restricted firmwares won't load properly unless legal.<name>.license_ack is set to 1, either via kenv(1) or /boot/loader.conf. Reviewed by: mlaier, sam Permitted by: Intel (via Andrew Wilson) MFC after: 1 month
2007-03-02 11:42:56 +00:00
_ipwfw= ipwfw
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.endif
Add isci(4) driver for amd64 and i386 targets. The isci driver is for the integrated SAS controller in the Intel C600 (Patsburg) chipset. Source files in sys/dev/isci directory are FreeBSD-specific, and sys/dev/isci/scil subdirectory contains an OS-agnostic library (SCIL) published by Intel to control the SAS controller. This library is used primarily as-is in this driver, with some post-processing to better integrate into the kernel build environment. isci.4 and a README in the sys/dev/isci directory contain a few additional details. This driver is only built for amd64 and i386 targets. Sponsored by: Intel Reviewed by: scottl Approved by: scottl
2012-01-31 19:38:18 +00:00
_isci= isci
Don't build the ipw and iwi on pc98.
2006-03-17 13:06:19 +00:00
_iwi= iwi
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.if ${MK_SOURCELESS_UCODE} != "no"
- Add Intel firmwares for Intel PRO/Wireless LAN 2100/2200/2915 cards in a uuencoded format along with their respective LICENSE files. - Add new share/doc/legal directory to BSD.usr.dist mtree file. This is the place we install LICENSE files for restricted firmwares. - Teach firmware(9) and kmod.mk about licensed firmwares. Restricted firmwares won't load properly unless legal.<name>.license_ack is set to 1, either via kenv(1) or /boot/loader.conf. Reviewed by: mlaier, sam Permitted by: Intel (via Andrew Wilson) MFC after: 1 month
2007-03-02 11:42:56 +00:00
_iwifw= iwifw
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.endif
Intel 4965 wireless driver (derived from openbsd driver of the same name)
2008-04-29 21:36:17 +00:00
_iwn= iwn
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.if ${MK_SOURCELESS_UCODE} != "no"
Intel 4965 wireless driver (derived from openbsd driver of the same name)
2008-04-29 21:36:17 +00:00
_iwnfw= iwnfw
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.endif
Rescue whitespace nits.
2007-10-16 11:39:28 +00:00
_ixgb= ixgb
Build the ixgbe(4) and mwlfw(4) modules by default. PR: 144494 Submitted by: John Giacomoni <John.Giacomoni@LineRateSystems.com>, brucec
2010-05-12 17:30:46 +00:00
_ixgbe= ixgbe
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_mly= mly
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
_nfe= nfe
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.if ${MK_SOURCELESS_HOST} != "no"
Don't build the nve on pc98.
2005-03-12 10:41:58 +00:00
_nve= nve
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.endif
Disable the coretemp and nvram on pc98.
2007-10-26 13:42:17 +00:00
_nvram= nvram
Neterion Xframe 10GbE Server/Storage adapter driver. The nxge driver provides support for Neterion Xframe-I and Xframe-II adapters. The driver supports TCP Segmentation Offload (TSO/LSO), Jumbo frames (5 buffer mode), Header separation (2 and 3 Receive buffer modes), VLAN, and Promiscuous mode. Submitted by: Neterion Reviewed by: rwatson Approved by: re (kensmith)
2007-06-29 22:47:18 +00:00
_nxge= nxge
This depends on ACPI, so only build on i386:i386, amd64:amd64 and ia64:ia64. It can't possibly work on pc98, or any of the embedded platforms, since they lack ACPI.
2010-08-12 22:46:31 +00:00
_tpm= tpm
Add watchdog support for VIA south bridge chipset. Tested on VT8251, VX900 but CX700, VX800, VX855 should works. MFC after: 1 month Sponsored by: NETASQ
2011-12-12 09:50:33 +00:00
_viawd= viawd
Link wpi(4) into the build. This includes: o mtree (for legal/intel_wpi) o manpage for i386/amd64 archs o module for i386/amd64 archs o NOTES for i386/amd64 archs Approved by: mlaier (comentor)
2007-11-08 22:09:37 +00:00
_wpi= wpi
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.if ${MK_SOURCELESS_UCODE} != "no"
Link wpi(4) into the build. This includes: o mtree (for legal/intel_wpi) o manpage for i386/amd64 archs o module for i386/amd64 archs o NOTES for i386/amd64 archs Approved by: mlaier (comentor)
2007-11-08 22:09:37 +00:00
_wpifw= wpifw
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.endif
Reimplementation of world/kernel build options. For details, see: http://lists.freebsd.org/pipermail/freebsd-current/2006-March/061725.html The src.conf(5) manpage is to follow in a few days. Brought to you by: imp, jhb, kris, phk, ru (all bugs are mine)
2006-03-17 18:54:44 +00:00
.if ${MK_CRYPT} != "no" || defined(ALL_MODULES)
Add VIA/ACE "PadLock" support as a crypto(9) driver. HW donated by: Mike Tancsa <mike@sentex.net> Most of the code obtained from: OpenBSD MFC after: 3 days
2005-08-18 00:30:22 +00:00
_padlock= padlock
.endif
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_s3= s3
Added 3ware's twa. Reviewed by: ps
2004-04-27 17:57:45 +00:00
_twa= twa
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_vesa= vesa
Import virtio base, PCI front-end, and net/block/balloon drivers. Tested on Qemu/KVM, VirtualBox, and BHyVe. Currently built as modules-only on i386/amd64. Man pages not yet hooked up, pending review. Submitted by: Bryan Venteicher bryanv at daemoninthecloset dot org Reviewed by: bz MFC after: 4 weeks or so
2011-11-18 05:43:43 +00:00
_virtio= virtio
Build x86bios only for i386/amd64 for now. More work is required to make these functional on other architectures, and the current code breaks sparc64 and powerpc. Spotted by: tinderbox via des
2009-09-21 23:58:29 +00:00
_x86bios= x86bios
Create a MACHINE_ARCH == i386 section that first lists modules common to both i386 and pc98 and then uses MACHINE subsections to list modules specific to i386/i386 and i386/pc98.
2002-11-07 15:01:12 +00:00
.elif ${MACHINE} == "pc98"
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_canbepm= canbepm
_canbus= canbus
_pmc= pmc
_snc= snc
Create a MACHINE_ARCH == i386 section that first lists modules common to both i386 and pc98 and then uses MACHINE subsections to list modules specific to i386/i386 and i386/pc98.
2002-11-07 15:01:12 +00:00
.endif
Don't build unneeded modules for pc98.
2002-09-16 08:32:48 +00:00
.endif
MFtbemd: Use MACHINE_CPUARCH in preference to MACHINE_ARCH. The former is the source code location of the machine, the latter the binary output. In general, we want to use MACHINE_CPUARCH instead of MACHINE_ARCH unless we're tesitng for a specific target. The isn't even moot for i386/amd64 where there's momemntum towards a MACHINE_CPUARCH == x86, although a specific cleanup for that likely would be needed...
2010-08-23 06:13:29 +00:00
.if ${MACHINE_CPUARCH} == "amd64"
Enable aac(4) module build for amd64
2004-08-30 03:37:36 +00:00
_aac= aac
Add support for executing the FreeBSD 1/i386 a.out binaries on amd64. In particular: - implement compat shims for old stat(2) variants and ogetdirentries(2); - implement delivery of signals with ancient stack frame layout and corresponding sigreturn(2); - implement old getpagesize(2); - provide a user-mode trampoline and LDT call gate for lcall $7,$0; - port a.out image activator and connect it to the build as a module on amd64. The changes are hidden under COMPAT_43. MFC after: 1 month
2011-04-01 11:16:29 +00:00
_aout= aout
Catch up with ACPI-CA 20070320 import.
2007-03-22 18:16:43 +00:00
_acpi= acpi
Crypto(4) driver for AESNI. The aeskeys_{amd64,i386}.S content was mostly obtained from OpenBSD, no objections to the license from core. Hardware provided by: Sentex Communications Tested by: fabient, pho (previous versions) MFC after: 1 month
2010-07-23 11:00:46 +00:00
.if ${MK_CRYPT} != "no" || defined(ALL_MODULES)
_aesni= aesni
.endif
AMD64 on-CPU GART support. This also applies to AMD64 HW running 'i386' OS. Submitted by: Jung-uk Kim <jkim@niksun.com> Integration by: obrien
2004-08-16 12:25:48 +00:00
_agp= agp
an driver not endian clean, so don't enable on sparc64
2006-02-05 17:38:28 +00:00
_an= an
amdsbwd: new driver for AMD SB600/SB7xx watchdog timer The hardware is compliant with WDRT specification, so I originally considered including generic WDRT watchdog support, but decided against it, because I couldn't find anyone to the code for me. WDRT seems to be not very popular. Besides, generic WDRT porbably requires a slightly different driver approach. Reviewed by: des, gavin, rpaulo MFC after: 3 weeks
2009-11-30 11:44:03 +00:00
_amdsbwd= amdsbwd
Rename the k8temp driver to amdtemp. MFC after: 2 weeks
2009-03-13 16:08:08 +00:00
_amdtemp= amdtemp
Glue the arcmsr driver into the tree.
2005-03-31 20:21:43 +00:00
_arcmsr= arcmsr
Connect asmc to the build infrastructure. Approved by: njl (mentor) Reviewed by: njl (mentor)
2007-11-07 20:08:15 +00:00
_asmc= asmc
Connect the bktr module(s) to the amd64 build. MFC after: 7 days
2012-01-18 08:56:26 +00:00
_bktr= bktr
- Added bxe(4) driver for i386 and amd64. Currently untested on other CPU architectures. MFC after: One week
2011-04-25 21:53:41 +00:00
_bxe= bxe
Add cbb, cardbus, pccard and exca to the list of modules. The appear to work on the Turion64 laptop I have.
2006-05-24 16:26:29 +00:00
_cardbus= cardbus
_cbb= cbb
Commit cmx(4), a driver for Omnikey CardMan 4040 PCMCIA smartcard readers. PR: kern/114582 Submitted by: Daniel Roethlisberger <daniel@roe.ch> Reviewed by: imp, myself Tested by: johans, myself MFC after: 2 weeks
2008-03-06 08:09:45 +00:00
_cmx= cmx
Enable more modules on AMD64: ciss em ext2fs i2c ida iir ips lnc mly safe scsi_low smbfs sppp twa
2004-08-29 10:05:00 +00:00
_ciss= ciss
Add a driver for the on-die digital thermal sensor found on Intel Core and newer CPUs (including Core 2 and Core / Core 2 based Xeons). The driver attaches to each cpu device and creates a sysctl node in that device's sysctl context (dev.cpu.N.temperature). When invoked, the handler binds to the appropriate CPU to ensure a correct reading. Submitted by: Rui Paulo <rpaulo@fnop.net> Sponsored by: Google Summer of Code 2007 Tested by: des, marcus, Constantine A. Murenin, Ian FREISLICH Approved by: re (kensmith) MFC after: 3 weeks
2007-08-15 19:26:03 +00:00
_coretemp= coretemp
- Add cpuctl(4) pseudo-device driver to provide access to some low-level features of CPUs like reading/writing machine-specific registers, retrieving cpuid data, and updating microcode. - Add cpucontrol(8) utility, that provides userland access to the features of cpuctl(4). - Add subsequent manpages. The cpuctl(4) device operates as follows. The pseudo-device node cpuctlX is created for each cpu present in the systems. The pseudo-device minor number corresponds to the cpu number in the system. The cpuctl(4) pseudo- device allows a number of ioctl to be preformed, namely RDMSR/WRMSR/CPUID and UPDATE. The first pair alows the caller to read/write machine-specific registers from the correspondent CPU. cpuid data could be retrieved using the CPUID call, and microcode updates are applied via UPDATE. The permissions are inforced based on the pseudo-device file permissions. RDMSR/CPUID will be allowed when the caller has read access to the device node, while WRMSR/UPDATE will be granted only when the node is opened for writing. There're also a number of priv(9) checks. The cpucontrol(8) utility is intened to provide userland access to the cpuctl(4) device features. The utility also allows one to apply cpu microcode updates. Currently only Intel and AMD cpus are supported and were tested. Approved by: kib Reviewed by: rpaulo, cokane, Peter Jeremy MFC after: 1 month
2008-08-08 16:26:53 +00:00
_cpuctl= cpuctl
Only compile the cpufreq driver on i386 and amd64.
2005-02-05 08:01:10 +00:00
_cpufreq= cpufreq
Hook the DTrace kernel modules into the build.
2008-05-23 22:36:12 +00:00
.if ${MK_CDDL} != "no" || defined(ALL_MODULES)
_cyclic= cyclic
.endif
- Teach vesa(4) and dpms(4) about x86emu. [1] - Add vesa kernel options for amd64. - Connect libvgl library and splash kernel modules to amd64 build. - Connect manual page dpms(4) to amd64 build. - Remove old vesa/dpms files. Submitted by: paradox <ddkprog yahoo com> [1], swell k at gmail.com (with some minor tweaks)
2009-09-09 09:50:31 +00:00
_dpms= dpms
AMD64 on-CPU GART support. This also applies to AMD64 HW running 'i386' OS. Submitted by: Jung-uk Kim <jkim@niksun.com> Integration by: obrien
2004-08-16 12:25:48 +00:00
_drm= drm
Enable drm2 modules build. Sponsored by: The FreeBSD Foundation MFC after: 1 month
2012-05-23 21:07:01 +00:00
_drm2= drm2
Hook the DTrace kernel modules into the build.
2008-05-23 22:36:12 +00:00
.if ${MK_CDDL} != "no" || defined(ALL_MODULES)
_dtrace= dtrace
.endif
Build ed on amd64. The pci attachment works with qemu on amd64. I'm holding off on building on sparc64 and others because I don't know if this driver has had all the inb/outb removed (I think it has). Nor do I know if there are byte ordering issues. There are very few word operations on an NE2000, but I've not had time to audit them all. Suggested by: Daniel O'Connor
2005-12-23 21:54:56 +00:00
_ed= ed
Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit Ethernet device driver, written by sephe@ Obtained from: DragonFly Sponsored by: iXsystems MFC after: 2 weeks
2008-06-20 19:28:33 +00:00
_et= et
Enable more modules on AMD64: ciss em ext2fs i2c ida iir ips lnc mly safe scsi_low smbfs sppp twa
2004-08-29 10:05:00 +00:00
_em= em
Add cbb, cardbus, pccard and exca to the list of modules. The appear to work on the Turion64 laptop I have.
2006-05-24 16:26:29 +00:00
_exca= exca
Enable more modules on AMD64: ciss em ext2fs i2c ida iir ips lnc mly safe scsi_low smbfs sppp twa
2004-08-29 10:05:00 +00:00
_ext2fs= ext2fs
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.if ${MK_SOURCELESS_HOST} != "no"
Import the first release of HighPoint RocketRAID 27xx SAS 6Gb/s HBA card driver. This driver works for FreeBSD/i386 and FreeBSD/amd64 platforms. Many thanks to HighPoint for providing this driver. MFC after: 2 weeks
2011-12-28 23:26:58 +00:00
_hpt27xx= hpt27xx
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.endif
It turns out that the hptiop driver isn't portable after all. Confine it to amd64 and i386 for now.
2007-05-09 15:55:45 +00:00
_hptiop= hptiop
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.if ${MK_SOURCELESS_HOST} != "no"
Hook up the hptmv driver for amd64. MFC After: 3 days
2005-09-08 03:29:18 +00:00
_hptmv= hptmv
Add the 'hptrr' driver for supporting the following Highpoint RocketRAID cards: o RocketRAID 172x series o RocketRAID 174x series o RocketRAID 2210 o RocketRAID 222x series o RocketRAID 2240 o RocketRAID 230x series o RocketRAID 231x series o RocketRAID 232x series o RocketRAID 2340 o RocketRAID 2522 Many thanks to Highpoint for their continued support of FreeBSD. Submitted by: Highpoint
2007-12-15 00:56:17 +00:00
_hptrr= hptrr
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.endif
Enable more modules on AMD64: ciss em ext2fs i2c ida iir ips lnc mly safe scsi_low smbfs sppp twa
2004-08-29 10:05:00 +00:00
_i2c= i2c
i386->amd64 sync Add ath_hal and ichwd modules Approved by: re (blanked i386<->amd64 sync)
2005-06-30 05:37:48 +00:00
_ichwd= ichwd
Enable more modules on AMD64: ciss em ext2fs i2c ida iir ips lnc mly safe scsi_low smbfs sppp twa
2004-08-29 10:05:00 +00:00
_ida= ida
Throw the switch on the new driver generation/loading mechanism. From here on in, if_ndis.ko will be pre-built as a module, and can be built into a static kernel (though it's not part of GENERIC). Drivers are created using the new ndisgen(8) script, which uses ndiscvt(8) under the covers, along with a few other tools. The result is a driver module that can be kldloaded into the kernel. A driver with foo.inf and foo.sys files will be converted into foo_sys.ko (and foo_sys.o, for those who want/need to make static kernels). This module contains all of the necessary info from the .INF file and the driver binary image, converted into an ELF module. You can kldload this module (or add it to /boot/loader.conf) to have it loaded automatically. Any required firmware files can be bundled into the module as well (or converted/loaded separately). Also, add a workaround for a problem in NdisMSleep(). During system bootstrap (cold == 1), msleep() always returns 0 without actually sleeping. The Intel 2200BG driver uses NdisMSleep() to wait for the NIC's firmware to come to life, and fails to load if NdisMSleep() doesn't actually delay. As a workaround, if msleep() (and hence ndis_thsuspend()) returns 0, use a hard DELAY() to sleep instead). This is not really the right thing to do, but we can't really do much else. At the very least, this makes the Intel driver happy. There are probably other drivers that fail in this way during bootstrap. Unfortunately, the only workaround for those is to avoid pre-loading them and kldload them once the system is running instead.
2005-04-24 20:21:22 +00:00
_if_ndis= if_ndis
Last change was incomplete, instantiate the igb variable...
2008-02-29 22:52:59 +00:00
_igb= igb
Enable more modules on AMD64: ciss em ext2fs i2c ida iir ips lnc mly safe scsi_low smbfs sppp twa
2004-08-29 10:05:00 +00:00
_iir= iir
Break out the MI part of the /dev/[k]mem and /dev/io drivers into their own directory and module, leaving the MD parts in the MD area (the MD parts _are_ part of the modules). /dev/mem and /dev/io are now loadable modules, thus taking us one step further towards a kernel created entirely out of modules. Of course, there is nothing preventing the kernel from having these statically compiled.
2004-08-01 11:40:54 +00:00
_io= io
Tie the ipmi driver into the i386/amd64 builds.
2006-02-13 17:56:24 +00:00
_ipmi= ipmi
Enable more modules on AMD64: ciss em ext2fs i2c ida iir ips lnc mly safe scsi_low smbfs sppp twa
2004-08-29 10:05:00 +00:00
_ips= ips
build ipw(4) and iwi(4) modules on i386 and amd64 only.
2006-03-15 20:58:44 +00:00
_ipw= ipw
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.if ${MK_SOURCELESS_UCODE} != "no"
- Add Intel firmwares for Intel PRO/Wireless LAN 2100/2200/2915 cards in a uuencoded format along with their respective LICENSE files. - Add new share/doc/legal directory to BSD.usr.dist mtree file. This is the place we install LICENSE files for restricted firmwares. - Teach firmware(9) and kmod.mk about licensed firmwares. Restricted firmwares won't load properly unless legal.<name>.license_ack is set to 1, either via kenv(1) or /boot/loader.conf. Reviewed by: mlaier, sam Permitted by: Intel (via Andrew Wilson) MFC after: 1 month
2007-03-02 11:42:56 +00:00
_ipwfw= ipwfw
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.endif
Add isci(4) driver for amd64 and i386 targets. The isci driver is for the integrated SAS controller in the Intel C600 (Patsburg) chipset. Source files in sys/dev/isci directory are FreeBSD-specific, and sys/dev/isci/scil subdirectory contains an OS-agnostic library (SCIL) published by Intel to control the SAS controller. This library is used primarily as-is in this driver, with some post-processing to better integrate into the kernel build environment. isci.4 and a README in the sys/dev/isci directory contain a few additional details. This driver is only built for amd64 and i386 targets. Sponsored by: Intel Reviewed by: scottl Approved by: scottl
2012-01-31 19:38:18 +00:00
_isci= isci
Build iwi(4) and iwifw(4) modules on amd64 as well. PR: 113117 Submitted by: "O. Hartmann" <ohartman@zedat.fu-berlin.de> MFC after: 1 week
2010-01-14 16:49:22 +00:00
_iwi= iwi
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.if ${MK_SOURCELESS_UCODE} != "no"
Build iwi(4) and iwifw(4) modules on amd64 as well. PR: 113117 Submitted by: "O. Hartmann" <ohartman@zedat.fu-berlin.de> MFC after: 1 week
2010-01-14 16:49:22 +00:00
_iwifw= iwifw
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.endif
Intel 4965 wireless driver (derived from openbsd driver of the same name)
2008-04-29 21:36:17 +00:00
_iwn= iwn
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.if ${MK_SOURCELESS_UCODE} != "no"
Intel 4965 wireless driver (derived from openbsd driver of the same name)
2008-04-29 21:36:17 +00:00
_iwnfw= iwnfw
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.endif
Rescue whitespace nits.
2007-10-16 11:39:28 +00:00
_ixgb= ixgb
Build the ixgbe(4) and mwlfw(4) modules by default. PR: 144494 Submitted by: John Giacomoni <John.Giacomoni@LineRateSystems.com>, brucec
2010-05-12 17:30:46 +00:00
_ixgbe= ixgbe
lindev(4) [1] is supposed to be a collection of linux-specific pseudo devices that we also support, just not by default (thus only LINT or module builds by default). While currently there is only "/dev/full" [2], we are planning to see more in the future. We may decide to change the module/dependency logic in the future should the list grow too long. This is not part of linux.ko as also non-linux binaries like kFreeBSD userland or ports can make use of this as well. Suggested by: rwatson [1] (name) Submitted by: ed [2] Discussed with: markm, ed, rwatson, kib (weeks ago) Reviewed by: rwatson, brueffer (prev. version) PR: kern/68961 MFC after: 6 weeks
2009-09-26 12:45:28 +00:00
_lindev= lindev
Build linprocfs and linsysfs as modules on amd64. Sponsored by: Google SoC 2006 Submitted by: rdivacky
2006-09-09 16:58:22 +00:00
_linprocfs= linprocfs
_linsysfs= linsysfs
Add the linux module to the amd64 build, all symbols can now be resolved.
2006-12-02 13:58:13 +00:00
_linux= linux
Enable more modules on AMD64: ciss em ext2fs i2c ida iir ips lnc mly safe scsi_low smbfs sppp twa
2004-08-29 10:05:00 +00:00
_mly= mly
- Move ofed modules into the i386 and amd64 specific sections to fix universe on other architectures.
2011-03-23 08:27:57 +00:00
.if ${MK_OFED} != "no" || defined(ALL_MODULES)
_mlx4= mlx4
_mlx4ib= mlx4ib
_mlxen= mlxen
_mthca= mthca
.endif
Add support for Windows/x86-64 binaries to Project Evil. Ville-Pertti Keinonen (will at exomi dot comohmygodnospampleasekthx) deserves a big thanks for submitting initial patches to make it work. I have mangled his contributions appropriately. The main gotcha with Windows/x86-64 is that Microsoft uses a different calling convention than everyone else. The standard ABI requires using 6 registers for argument passing, with other arguments on the stack. Microsoft uses only 4 registers, and requires the caller to leave room on the stack for the register arguments incase the callee needs to spill them. Unlike x86, where Microsoft uses a mix of _cdecl, _stdcall and _fastcall, all routines on Windows/x86-64 uses the same convention. This unfortunately means that all the functions we export to the driver require an intermediate translation wrapper. Similarly, we have to wrap all calls back into the driver binary itself. The original patches provided macros to wrap every single routine at compile time, providing a secondary jump table with a customized wrapper for each exported routine. I decided to use a different approach: the call wrapper for each function is created from a template at runtime, and the routine to jump to is patched into the wrapper as it is created. The subr_pe module has been modified to patch in the wrapped function instead of the original. (On x86, the wrapping routine is a no-op.) There are some minor API differences that had to be accounted for: - KeAcquireSpinLock() is a real function on amd64, not a macro wrapper around KfAcquireSpinLock() - NdisFreeBuffer() is actually IoFreeMdl(). I had to change the whole NDIS_BUFFER API a bit to accomodate this. Bugs fixed along the way: - IoAllocateMdl() always returned NULL - kern_windrv.c:windrv_unload() wasn't releasing private driver object extensions correctly (found thanks to memguard) This has only been tested with the driver for the Broadcom 802.11g chipset, which was the only Windows/x86-64 driver I could find.
2005-02-16 05:41:18 +00:00
_ndis= ndis
Add a pure open source nForce Ethernet driver, under BSDL. This driver was ported from OpenBSD by Shigeaki Tagashira <shigeaki@se.hiroshima-u.ac.jp> and posted at http://www.se.hiroshima-u.ac.jp/~shigeaki/software/freebsd-nfe.html It was additionally cleaned up by me. It is still a work-in-progress and thus is purposefully not in GENERIC. And it conflicts with nve(4), so only one should be loaded.
2006-06-26 23:41:07 +00:00
_nfe= nfe
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.if ${MK_SOURCELESS_HOST} != "no"
FreeBSD consumer bits of the nForce MCP NIC binary blob. Demanded by: DES Encouraged by: scottl Obtained from: q@onthenet.com.au (partially) KNF'ed by: obrien
2005-03-12 00:29:30 +00:00
_nve= nve
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.endif
Split /dev/nvram driver out of isa/clock.c for i386 and amd64. I have not refactored it to be a generic device. Instead of being part of the standard kernel, there is now a 'nvram' device for i386/amd64. It is in DEFAULTS like io and mem, and can be turned off with 'nodevice nvram'. This matches the previous behavior when it was first committed.
2007-10-26 03:23:54 +00:00
_nvram= nvram
Neterion Xframe 10GbE Server/Storage adapter driver. The nxge driver provides support for Neterion Xframe-I and Xframe-II adapters. The driver supports TCP Segmentation Offload (TSO/LSO), Jumbo frames (5 buffer mode), Header separation (2 and 3 Receive buffer modes), VLAN, and Promiscuous mode. Submitted by: Neterion Reviewed by: rwatson Approved by: re (kensmith)
2007-06-29 22:47:18 +00:00
_nxge= nxge
Hook the DTrace kernel modules into the build.
2008-05-23 22:36:12 +00:00
.if ${MK_CDDL} != "no" || defined(ALL_MODULES)
_opensolaris= opensolaris
.endif
Connect padlock(4) to amd64 build for VIA Nano processors.
2009-01-12 19:23:46 +00:00
.if ${MK_CRYPT} != "no" || defined(ALL_MODULES)
_padlock= padlock
.endif
Add cbb, cardbus, pccard and exca to the list of modules. The appear to work on the Turion64 laptop I have.
2006-05-24 16:26:29 +00:00
_pccard= pccard
Add QLogic 10 Gigabit Ethernet & CNA Adapter Driver version 1.30 for 3200 and 8200 series cards. Submitted by: David C Somayajulu (david.somayajulu@qlogic.com), Qlogic Corporation MFC After: 3 days
2011-11-03 21:20:22 +00:00
_qlxgb= qlxgb
add rdma to build for i386 and amd64
2008-05-05 20:41:54 +00:00
_rdma= rdma
Enable s3pci on amd64 which works on top of VESA, and allow static building it into kernel on i386 and amd64. Submitted by: swell.k at gmail.com
2009-09-21 07:05:48 +00:00
_s3= s3
Enable more modules on AMD64: ciss em ext2fs i2c ida iir ips lnc mly safe scsi_low smbfs sppp twa
2004-08-29 10:05:00 +00:00
_safe= safe
_scsi_low= scsi_low
Limit building sfxge(4) to amd64 only to unbreak the tinderboxen. The driver should also work on (at least) i386 but hasn't been built/tested for a while. MFC after: 3 weeks
2011-11-18 11:10:14 +00:00
_sfxge= sfxge
Enable more modules on AMD64: ciss em ext2fs i2c ida iir ips lnc mly safe scsi_low smbfs sppp twa
2004-08-29 10:05:00 +00:00
_smbfs= smbfs
Enable sound modules.
2004-08-29 09:14:18 +00:00
_sound= sound
Add /dev/speaker support to amd64. The following repo-copies were made (by Mark Murray): sys/i386/isa/spkr.c -> sys/dev/speaker/spkr.c sys/i386/include/speaker.h -> sys/dev/speaker/speaker.h share/man/man4/man4.i386/spkr.4 -> share/man/man4/spkr.4
2005-11-11 09:57:32 +00:00
_speaker= speaker
- Teach vesa(4) and dpms(4) about x86emu. [1] - Add vesa kernel options for amd64. - Connect libvgl library and splash kernel modules to amd64 build. - Connect manual page dpms(4) to amd64 build. - Remove old vesa/dpms files. Submitted by: paradox <ddkprog yahoo com> [1], swell k at gmail.com (with some minor tweaks)
2009-09-09 09:50:31 +00:00
_splash= splash
Enable more modules on AMD64: ciss em ext2fs i2c ida iir ips lnc mly safe scsi_low smbfs sppp twa
2004-08-29 10:05:00 +00:00
_sppp= sppp
This depends on ACPI, so only build on i386:i386, amd64:amd64 and ia64:ia64. It can't possibly work on pc98, or any of the embedded platforms, since they lack ACPI.
2010-08-12 22:46:31 +00:00
_tpm= tpm
Enable more modules on AMD64: ciss em ext2fs i2c ida iir ips lnc mly safe scsi_low smbfs sppp twa
2004-08-29 10:05:00 +00:00
_twa= twa
- Teach vesa(4) and dpms(4) about x86emu. [1] - Add vesa kernel options for amd64. - Connect libvgl library and splash kernel modules to amd64 build. - Connect manual page dpms(4) to amd64 build. - Remove old vesa/dpms files. Submitted by: paradox <ddkprog yahoo com> [1], swell k at gmail.com (with some minor tweaks)
2009-09-09 09:50:31 +00:00
_vesa= vesa
Add watchdog support for VIA south bridge chipset. Tested on VT8251, VX900 but CX700, VX800, VX855 should works. MFC after: 1 month Sponsored by: NETASQ
2011-12-12 09:50:33 +00:00
_viawd= viawd
Import virtio base, PCI front-end, and net/block/balloon drivers. Tested on Qemu/KVM, VirtualBox, and BHyVe. Currently built as modules-only on i386/amd64. Man pages not yet hooked up, pending review. Submitted by: Bryan Venteicher bryanv at daemoninthecloset dot org Reviewed by: bz MFC after: 4 weeks or so
2011-11-18 05:43:43 +00:00
_virtio= virtio
Connect the vxge(4) module to the i386/amd64 build. Catcher of stupid errors: kib Approved by: re (kib)
2011-09-12 20:57:22 +00:00
_vxge= vxge
Build x86bios only for i386/amd64 for now. More work is required to make these functional on other architectures, and the current code breaks sparc64 and powerpc. Spotted by: tinderbox via des
2009-09-21 23:58:29 +00:00
_x86bios= x86bios
Restore changes accidentally removed in r235537. Noticed by: avg
2012-06-04 08:40:14 +00:00
_wbwd= wbwd
wi works on amd64 laptops. Enable its building as a module.
2006-05-26 03:45:29 +00:00
_wi= wi
Link wpi(4) into the build. This includes: o mtree (for legal/intel_wpi) o manpage for i386/amd64 archs o module for i386/amd64 archs o NOTES for i386/amd64 archs Approved by: mlaier (comentor)
2007-11-08 22:09:37 +00:00
_wpi= wpi
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.if ${MK_SOURCELESS_UCODE} != "no"
Link wpi(4) into the build. This includes: o mtree (for legal/intel_wpi) o manpage for i386/amd64 archs o module for i386/amd64 archs o NOTES for i386/amd64 archs Approved by: mlaier (comentor)
2007-11-08 22:09:37 +00:00
_wpifw= wpifw
Add MK_SOURCELESS build option. Setting MK_SOURCELESS to "no" will disable kernel modules that include binary-only code. More fine-grained control is provided via MK_SOURCELESS_HOST (for native code that runs on host CPU) and MK_SOURCELESS_UCODE (for microcode). Reviewed by: julian, delphij, freebsd-arch Approved by: kib (mentor) MFC after: 2 weeks
2012-02-04 00:54:43 +00:00
.endif
Build ZFS on amd64 and pc98. Approved by: pjd@
2007-04-07 19:12:10 +00:00
.if ${MK_ZFS} != "no" || defined(ALL_MODULES)
_zfs= zfs
.endif
Enable ndis for AMD64 (for the time that modules are supported)...
2004-01-28 04:15:10 +00:00
.endif
Add a module for cfi(4). Build only for arm and powerpc, as there are only bus attachments only for these.
2011-12-30 03:48:39 +00:00
.if ${MACHINE_CPUARCH} == "arm"
_cfi= cfi
.endif
MFtbemd: Use MACHINE_CPUARCH in preference to MACHINE_ARCH. The former is the source code location of the machine, the latter the binary output. In general, we want to use MACHINE_CPUARCH instead of MACHINE_ARCH unless we're tesitng for a specific target. The isn't even moot for i386/amd64 where there's momemntum towards a MACHINE_CPUARCH == x86, although a specific cleanup for that likely would be needed...
2010-08-23 06:13:29 +00:00
.if ${MACHINE_CPUARCH} == "ia64"
Bring up-to-date: o Switch to ITANIUM2 has the cpu. This has absolutely no effect on the code, but makes for a better example. o Drop COMPAT_FREEBSD6. We're tier 2, so you're supposed to run 8-stable or newer. o Add PREEMPTION. It works now. o Remove HWPMC_HOOKS. We don't have support for hwpmc yet. o Add a bunch of new devices: atapist, hptiop, amr, ips, twa, igb, ixgbe, ae, age, alc, ale, bce, bfe, et, jme, msk, nge, sk, ste, stge, tx, vge, axe, rue, udav, fwip, and all USB serial. o Remove "legacy" devices: le, vx, dc, pcn, rl, sis. Make sure to the module list is a superset of what goes into GENERIC.
2010-03-27 06:53:11 +00:00
_aac= aac
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_aic= aic
Sort.
2007-10-15 08:26:12 +00:00
_an= an
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_arcnet= arcnet
_asr= asr
_bktr= bktr
_cardbus= cardbus
_cbb= cbb
_ciss= ciss
_cm= cm
Commit cmx(4), a driver for Omnikey CardMan 4040 PCMCIA smartcard readers. PR: kern/114582 Submitted by: Daniel Roethlisberger <daniel@roe.ch> Reviewed by: imp, myself Tested by: johans, myself MFC after: 2 weeks
2008-03-06 08:09:45 +00:00
_cmx= cmx
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_coff= coff
Build cpufreq on ia64. The upcoming Montecito processor supports the Enhanced SpeedStep (that is, a follow-up of it called Foxton). Until we actually have support for that, we build to catch regressions in the framework. Triggered by: njl
2005-04-13 02:20:17 +00:00
_cpufreq= cpufreq
Bring up-to-date: o Switch to ITANIUM2 has the cpu. This has absolutely no effect on the code, but makes for a better example. o Drop COMPAT_FREEBSD6. We're tier 2, so you're supposed to run 8-stable or newer. o Add PREEMPTION. It works now. o Remove HWPMC_HOOKS. We don't have support for hwpmc yet. o Add a bunch of new devices: atapist, hptiop, amr, ips, twa, igb, ixgbe, ae, age, alc, ale, bce, bfe, et, jme, msk, nge, sk, ste, stge, tx, vge, axe, rue, udav, fwip, and all USB serial. o Remove "legacy" devices: le, vx, dc, pcn, rl, sis. Make sure to the module list is a superset of what goes into GENERIC.
2010-03-27 06:53:11 +00:00
_dpt= dpt
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_em= em
_ep= ep
Bring up-to-date: o Switch to ITANIUM2 has the cpu. This has absolutely no effect on the code, but makes for a better example. o Drop COMPAT_FREEBSD6. We're tier 2, so you're supposed to run 8-stable or newer. o Add PREEMPTION. It works now. o Remove HWPMC_HOOKS. We don't have support for hwpmc yet. o Add a bunch of new devices: atapist, hptiop, amr, ips, twa, igb, ixgbe, ae, age, alc, ale, bce, bfe, et, jme, msk, nge, sk, ste, stge, tx, vge, axe, rue, udav, fwip, and all USB serial. o Remove "legacy" devices: le, vx, dc, pcn, rl, sis. Make sure to the module list is a superset of what goes into GENERIC.
2010-03-27 06:53:11 +00:00
_et= et
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_exca= exca
_fe= fe
Bring up-to-date: o Switch to ITANIUM2 has the cpu. This has absolutely no effect on the code, but makes for a better example. o Drop COMPAT_FREEBSD6. We're tier 2, so you're supposed to run 8-stable or newer. o Add PREEMPTION. It works now. o Remove HWPMC_HOOKS. We don't have support for hwpmc yet. o Add a bunch of new devices: atapist, hptiop, amr, ips, twa, igb, ixgbe, ae, age, alc, ale, bce, bfe, et, jme, msk, nge, sk, ste, stge, tx, vge, axe, rue, udav, fwip, and all USB serial. o Remove "legacy" devices: le, vx, dc, pcn, rl, sis. Make sure to the module list is a superset of what goes into GENERIC.
2010-03-27 06:53:11 +00:00
_hptiop= hptiop
_ida= ida
Last change was incomplete, instantiate the igb variable...
2008-02-29 22:52:59 +00:00
_igb= igb
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_iir= iir
Bring up-to-date: o Switch to ITANIUM2 has the cpu. This has absolutely no effect on the code, but makes for a better example. o Drop COMPAT_FREEBSD6. We're tier 2, so you're supposed to run 8-stable or newer. o Add PREEMPTION. It works now. o Remove HWPMC_HOOKS. We don't have support for hwpmc yet. o Add a bunch of new devices: atapist, hptiop, amr, ips, twa, igb, ixgbe, ae, age, alc, ale, bce, bfe, et, jme, msk, nge, sk, ste, stge, tx, vge, axe, rue, udav, fwip, and all USB serial. o Remove "legacy" devices: le, vx, dc, pcn, rl, sis. Make sure to the module list is a superset of what goes into GENERIC.
2010-03-27 06:53:11 +00:00
_ips= ips
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_mly= mly
_pccard= pccard
_scsi_low= scsi_low
_smbfs= smbfs
_sound= sound
_splash= splash
_sppp= sppp
_streams= streams
This depends on ACPI, so only build on i386:i386, amd64:amd64 and ia64:ia64. It can't possibly work on pc98, or any of the embedded platforms, since they lack ACPI.
2010-08-12 22:46:31 +00:00
_tpm= tpm
Bring up-to-date: o Switch to ITANIUM2 has the cpu. This has absolutely no effect on the code, but makes for a better example. o Drop COMPAT_FREEBSD6. We're tier 2, so you're supposed to run 8-stable or newer. o Add PREEMPTION. It works now. o Remove HWPMC_HOOKS. We don't have support for hwpmc yet. o Add a bunch of new devices: atapist, hptiop, amr, ips, twa, igb, ixgbe, ae, age, alc, ale, bce, bfe, et, jme, msk, nge, sk, ste, stge, tx, vge, axe, rue, udav, fwip, and all USB serial. o Remove "legacy" devices: le, vx, dc, pcn, rl, sis. Make sure to the module list is a superset of what goes into GENERIC.
2010-03-27 06:53:11 +00:00
_twa= twa
- Build things in pure alphabetical dictionary order. - Unify the conditional assignments section so that architectural exclusions come first, sorted, then options and !options, sorted by the option name, also in directory order, then architecture specific sections, sorted by the architecture name, with i386 being a traditional exception. Prodded by: bde
2004-01-16 15:55:29 +00:00
_wi= wi
_xe= xe
Enable building of the OSF/1 compat module.
1999-12-15 13:14:23 +00:00
.endif
Make kernel modules build correctly on 64-bit PowerPC.
2010-07-13 12:47:31 +00:00
.if ${MACHINE_CPUARCH} == "powerpc"
Add a driver for the Apple Uninorth AGP host bridge found in all PowerPC Macintoshes with an AGP bus.
2010-10-31 18:27:05 +00:00
_agp= agp
an driver not endian clean, so don't enable on sparc64
2006-02-05 17:38:28 +00:00
_an= an
Add support for the Apple Big Mac (BMAC) Ethernet controller, found on various Apple G3 models. Submitted by: Nathan Whitehorn
2008-06-07 22:58:32 +00:00
_bm= bm
Enable the pccard/cardbus modules for powerpc. Approved by: nwhitehorn (mentor)
2012-02-01 03:42:14 +00:00
_cardbus= cardbus
_cbb= cbb
Add a module for cfi(4). Build only for arm and powerpc, as there are only bus attachments only for these.
2011-12-30 03:48:39 +00:00
_cfi= cfi
Introduce support for cpufreq on PowerPC with the dynamic frequency switching capabilities of the MPC7447A and MPC7448.
2009-05-31 09:01:23 +00:00
_cpufreq= cpufreq
Add exca to powerpc modules build as a dependency for cbb.
2012-02-05 13:29:01 +00:00
_exca= exca
Split /dev/nvram driver out of isa/clock.c for i386 and amd64. I have not refactored it to be a generic device. Instead of being part of the standard kernel, there is now a 'nvram' device for i386/amd64. It is in DEFAULTS like io and mem, and can be turned off with 'nodevice nvram'. This matches the previous behavior when it was first committed.
2007-10-26 03:23:54 +00:00
_nvram= powermac_nvram
Enable the pccard/cardbus modules for powerpc. Approved by: nwhitehorn (mentor)
2012-02-01 03:42:14 +00:00
_pccard= pccard
Connect smbfs build on powerpc.
2005-09-19 08:13:43 +00:00
_smbfs= smbfs
Build sound modules on PowerPC.
2009-04-19 21:37:45 +00:00
_sound= sound
Build gem(4) on powerpc also.
2003-01-09 16:37:37 +00:00
.endif
Add OpenSolaris atomics for powerpc64 and connect ZFS to the build on this platform. Reviewed by: pjd
2010-07-17 13:34:01 +00:00
.if ${MACHINE_ARCH} == "powerpc64"
.if ${MK_CDDL} != "no" || defined(ALL_MODULES)
_opensolaris= opensolaris
.endif
.if ${MK_ZFS} != "no" || defined(ALL_MODULES)
_zfs= zfs
.endif
.endif
MFtbemd: Use MACHINE_CPUARCH in preference to MACHINE_ARCH. The former is the source code location of the machine, the latter the binary output. In general, we want to use MACHINE_CPUARCH instead of MACHINE_ARCH unless we're tesitng for a specific target. The isn't even moot for i386/amd64 where there's momemntum towards a MACHINE_CPUARCH == x86, although a specific cleanup for that likely would be needed...
2010-08-23 06:13:29 +00:00
.if ${MACHINE_CPUARCH} == "sparc64"
Port NetBSD auxio driver. The driver was modified to use led(4) and can be used to announce various system activity. The auxio device provides auxiliary I/O functions and is found on various SBus/EBus UltraSPARC models. At present, only front panel LED is controlled by this driver. Approved by: jake (mentor) Reviewed by: joerg Tested by: joerg
2004-10-09 07:31:03 +00:00
_auxio= auxio
Connect em(4) build on sparc64.
2005-11-09 08:46:02 +00:00
_em= em
Add epic(4), a driver for the front panel LEDs in Sun Fire V215/V245. It's named after the driver doing the same job in OpenSolaris.
2010-01-10 15:44:48 +00:00
_epic= epic
Finally complete some work on generalizing the PCF8584-based I2C drivers I started quite some time before. Retire the old i386-only pcf driver, and activate the new general driver that has been sitting in the tree already for quite some time. Build the i2c modules for sparc64 architectures as well (where I've been developing all this on).
2005-10-28 15:58:19 +00:00
_i2c= i2c
Last change was incomplete, instantiate the igb variable...
2008-02-29 22:52:59 +00:00
_igb= igb
Given that zfs.ko depends on opensolaris.ko also build the latter by default on sparc64.
2009-03-24 15:52:45 +00:00
.if ${MK_CDDL} != "no" || defined(ALL_MODULES)
_opensolaris= opensolaris
.endif
Build smbfs kernel module on sparc64.
2010-01-25 18:50:58 +00:00
_smbfs= smbfs
Device driver for onboard CS4231 audio controller which is found on UltraSPARC workstations. The driver is based on OpenBSD's SBus cs4231 driver and heavily modified to incorporate into sound(4) infrastructure. Due to the lack of APCDMA documentation, the DMA code of SBus cs4231 came from OpenBSD's driver. The driver runs without Giant lock and supports both SBus and EBus based CS4231 audio controller. Special thanks to marius for providing feedbacks during the driver writing. His feedback made it possible to write hiccup free playback code under high system loads. Approved by: jake (mentor) Reviewed by: marius (initial version) Tested by: marius, kwm, Julian C. Dunn(jdunn AT opentrend DOT net)
2004-10-25 10:29:57 +00:00
_sound= sound
Hook up ZFS to the sparc64 build. Approved by: pjd MFC after: 2 weeks
2008-04-11 23:04:36 +00:00
.if ${MK_ZFS} != "no" || defined(ALL_MODULES)
_zfs= zfs
.endif
Include the ufs module if ALL_MODULES is defined so that it gets built by LINT. Also override a number of knobs for enabling and disabling various modules in the ALL_MODULES case to further increase LINT's module coverage. Submitted by: ru
2003-06-23 22:01:01 +00:00
.endif
Always build all modules for LINT
2002-02-17 21:00:20 +00:00
.if defined(MODULES_OVERRIDE) && !defined(ALL_MODULES)
Add support for MODULES_OVERRIDE. This is a list of modules to build instead of all of them. You can put this in /etc/make.conf or in makeoptions. Reviewed by: arch@ # docs to follow.
2001-04-02 08:52:05 +00:00
SUBDIR=${MODULES_OVERRIDE}
.endif
Provide a WITHOUT_MODULES variable that specifies a list of modules to elide. This is a somewhat more convenient way of specifying in e.g. make.conf a list of modules you know you will never need. PR: kern/76225 Submitted by: David Yeske <dyeske@yahoo.com> MFC after: 2 weeks
2005-01-20 05:43:24 +00:00
.for reject in ${WITHOUT_MODULES}
SUBDIR:= ${SUBDIR:N${reject}}
.endfor
Only call kldxref(8) once, after installing all modules. OK'ed by: peter
2001-09-21 11:21:06 +00:00
# Calling kldxref(8) for each module is expensive.
Run kldxref on sparc64, it works now.
2003-01-21 05:52:48 +00:00
.if !defined(NO_XREF)
Simplify the assignment statement.
2003-03-12 14:32:46 +00:00
.MAKEFLAGS+= -DNO_XREF
Only call kldxref(8) once, after installing all modules. OK'ed by: peter
2001-09-21 11:21:06 +00:00
afterinstall:
Check that kldxref(8) exists before running it.
2002-05-14 07:49:12 +00:00
@if type kldxref >/dev/null 2>&1; then \
${ECHO} kldxref ${DESTDIR}${KMODDIR}; \
kldxref ${DESTDIR}${KMODDIR}; \
fi
Only call kldxref(8) once, after installing all modules. OK'ed by: peter
2001-09-21 11:21:06 +00:00
.endif
Per discussion on the mailing-lists, move LKMs from /sbin to /lkm, and arrange for that directory to get created by mtree. Also, process secure directory after all the others, because the programs there may overlay ones installed from the main part of the tree.
1994-09-16 20:24:29 +00:00
.include <bsd.subdir.mk>
Reference in New Issue Copy Permalink