- Don't enable the HLT intercept by default. It will be enabled by bhyve(8)
if required. Prior to this change HLT exiting was always enabled making
the "-H" option to bhyve(8) meaningless.
- Recognize a VM exit triggered by a non-maskable interrupt. Prior to this
change the exit would be punted to userspace and the virtual machine would
terminate.
instruction bytes in the VMCB on a nested page fault. This is useful because
it saves having to walk the guest page tables to fetch the instruction.
vie_init() now takes two additional parameters 'inst_bytes' and 'inst_len'
that map directly to 'vie->inst[]' and 'vie->num_valid'.
The instruction emulation handler skips calling 'vmm_fetch_instruction()'
if 'vie->num_valid' is non-zero.
The use of this capability can be turned off by setting the sysctl/tunable
'hw.vmm.svm.disable_npf_assist' to '1'.
Reviewed by: Anish Gupta (akgupt3@gmail.com)
Discussed with: grehan
by explicitly moving it out of the interrupt shadow. The hypervisor is done
"executing" the HLT and by definition this moves the vcpu out of the
1-instruction interrupt shadow.
Prior to this change the interrupt would be held pending because the VMCS
guest-interruptibility-state would indicate that "blocking by STI" was in
effect. This resulted in an unnecessary round trip into the guest before
the pending interrupt could be injected.
Reviewed by: grehan
window exiting. This simply involves setting V_IRQ and enabling the VINTR
intercept. This instructs the CPU to trap back into the hypervisor as soon
as an interrupt can be injected into the guest. The pending interrupt is
then injected via the traditional event injection mechanism.
Rework vcpu interrupt injection so that Linux guests now idle with host cpu
utilization close to 0%.
Reviewed by: Anish Gupta (earlier version)
Discussed with: grehan
AP startup and AP resume (it was already used for BSP startup and BSP
resume).
- Split code to do one-time probing of cache properties out of
initializecpu() and into initializecpucache(). This is called once on
the BSP during boot.
- Move enable_sse() into initializecpu().
- Call initializecpu() for AP startup instead of enable_sse() and
manually frobbing MSR_EFER to enable PG_NX.
- Call initializecpu() when an AP resumes. In theory this will now
properly re-enable PG_NX in MSR_EFER when resuming a PAE kernel on
APs.
Provide APIs svm_enable_intercept()/svm_disable_intercept() to add/delete
VMCB intercepts. These APIs ensure that the VMCB state cache is invalidated
when intercepts are modified.
Each intercept is identified as a (index,bitmask) tuple. For e.g., the
VINTR intercept is identified as (VMCB_CTRL1_INTCPT,VMCB_INTCPT_VINTR).
The first 20 bytes in control area that are used to enable intercepts
are represented as 'uint32_t intercept[5]' in 'struct vmcb_ctrl'.
Modify svm_setcap() and svm_getcap() to use the new APIs.
Discussed with: Anish Gupta (akgupt3@gmail.com)
Prior to this change an ASID was hard allocated to a guest and shared by all
its vcpus. The meant that the number of VMs that could be created was limited
to the number of ASIDs supported by the CPU. It was also inefficient because
it forced a TLB flush on every VMRUN.
With this change the number of guests that can be created is independent of
the number of available ASIDs. Also, the TLB is flushed only when a new ASID
is allocated.
Discussed with: grehan
Reviewed by: Anish Gupta (akgupt3@gmail.com)
resume that is a superset of a pcb. Move the FPU state out of the pcb and
into this new structure. As part of this, move the FPU resume code on
amd64 into a C function. This allows resumectx() to still operate only on
a pcb and more closely mirrors the i386 code.
Reviewed by: kib (earlier version)
The legacy USB circuit tends to give trouble on MacBook.
While the original report covered MacBook, extend the fix
preemptively for the newer MacBookPro too.
PR: 191693
Reviewed by: emaste
MFC after: 5 days
function restore_host_tss().
Don't bother to restore MSR_KGSBASE after a #VMEXIT since it is not used in
the kernel. It will be restored on return to userspace.
Discussed with: Anish Gupta (akgupt3@gmail.com)
<machine/md_var.h>.
- Move some CPU-related variables out of i386/i386/identcpu.c to
initcpu.c to match amd64.
- Move the declaration of has_f00f_hack out of identcpu.c to machdep.c.
- Remove a misleading comment from i386/i386/initcpu.c (locore zeros
the BSS before it calls identify_cpu()) and remove explicit zero
assignments to reduce the diff with amd64.
proper constraint for 'x'. The "+r" constraint indicates that 'x' is an
input and output register operand.
While here generate code for different variants of getcc() using a macro
GETCC(sz) where 'sz' indicates the operand size.
Update the status bits in %rflags when emulating AND and OR opcodes.
Reviewed by: grehan
optional attributes field.
- Add a 'machdep.smap' sysctl that exports the SMAP table of the running
system as an array of the ACPI 3.0 structure. (On older systems, the
attributes are given a value of zero.) Note that the sysctl only
exports the SMAP table if it is available via the metadata passed from
the loader to the kernel. If an SMAP is not available, an empty array
is returned.
- Add a format handler for the ACPI 3.0 SMAP structure to the sysctl(8)
binary to format the SMAP structures in a readable format similar to
the format found in boot messages.
MFC after: 2 weeks
shadow, so move the check for pending exception before bailing out due to
an interrupt shadow.
Change return type of 'vmcb_eventinject()' to a void and convert all error
returns into KASSERTs.
Fix VMCB_EXITINTINFO_EC(x) and VMCB_EXITINTINFO_TYPE(x) to do the shift
before masking the result.
Reviewed by: Anish Gupta (akgupt3@gmail.com)
tunables to modify the default cpu topology advertised by bhyve.
Also add a tunable "hw.vmm.topology.cpuid_leaf_b" to disable the CPUID
leaf 0xb. This is intended for testing guest behavior when it falls back
on using CPUID leaf 0x4 to deduce CPU topology.
The default behavior is to advertise each vcpu as a core in a separate soket.
the vcpu had no caches at all. This causes problems when executing applications
in the guest compiled with the Intel compiler.
Submitted by: Mark Hill (mark.hill@tidalscale.com)
Eventually, the vmd_segs of the struct vm_domain should become bitset
instead of long, to allow arbitrary compile-time selected maximum.
Reviewed by: alc
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
starting with a superpage demotion by pmap_enter() that could result in
a PV list lock being held when pmap_enter() is just about to return
KERN_RESOURCE_SHORTAGE. Consequently, the KASSERT that no PV list locks
are held needs to be replaced with a conditional unlock.
Discussed with: kib
X-MFC with: r269728
Sponsored by: EMC / Isilon Storage Division
mapping size (currently unused). The flags includes the fault access
bits, wired flag as PMAP_ENTER_WIRED, and a new flag
PMAP_ENTER_NOSLEEP to indicate that pmap should not sleep.
For powerpc aim both 32 and 64 bit, fix implementation to ensure that
the requested mapping is created when PMAP_ENTER_NOSLEEP is not
specified, in particular, wait for the available memory required to
proceed.
In collaboration with: alc
Tested by: nwhitehorn (ppc aim32 and booke)
Sponsored by: The FreeBSD Foundation and EMC / Isilon Storage Division
MFC after: 2 weeks
Add the ACPI MCFG table to advertise the extended config memory window.
Introduce a new flag MEM_F_IMMUTABLE for memory ranges that cannot be deleted
or moved in the guest's address space. The PCI extended config space is an
example of an immutable memory range.
Add emulation for the "movzw" instruction. This instruction is used by FreeBSD
to read a 16-bit extended config space register.
CR: https://phabric.freebsd.org/D505
Reviewed by: jhb, grehan
Requested by: tychon
The MD allocators were very common, however there were some minor
differencies. These differencies were all consolidated in the MI allocator,
under ifdefs. The defines from machine/vmparam.h turn on features required
for a particular machine. For details look in the comment in sys/sf_buf.h.
As result no MD code left in sys/*/*/vm_machdep.c. Some arches still have
machine/sf_buf.h, which is usually quite small.
Tested by: glebius (i386), tuexen (arm32), kevlo (arm32)
Reviewed by: kib
Sponsored by: Netflix
Sponsored by: Nginx, Inc.
We continue to use pmap_enter() for that. For unwiring virtual pages, we
now use pmap_unwire(), which unwires a range of virtual addresses instead
of a single virtual page.
Sponsored by: EMC / Isilon Storage Division
features. If bootverbose is enabled, a detailed list is provided;
otherwise, a single-line summary is displayed.
- Add read-only sysctls for optional VT-x capabilities used by bhyve
under a new hw.vmm.vmx.cap node. Move a few exiting sysctls that
indicate the presence of optional capabilities under this node.
CR: https://phabric.freebsd.org/D498
Reviewed by: grehan, neel
MFC after: 1 week
forever in vm_handle_hlt().
This is usually not an issue as long as one of the other vcpus properly resets
or powers off the virtual machine. However, if the bhyve(8) process is killed
with a signal the halted vcpu cannot be woken up because it's sleep cannot be
interrupted.
Fix this by waking up periodically and returning from vm_handle_hlt() if
TDF_ASTPENDING is set.
Reported by: Leon Dang
Sponsored by: Nahanni Systems
It is not possible to PUSH a 32-bit operand on the stack in 64-bit mode. The
default operand size for PUSH is 64-bits and the operand size override prefix
changes that to 16-bits.
vm_copy_setup() can return '1' if it encounters a fault when walking the
guest page tables. This is a guest issue and is now handled properly by
resuming the guest to handle the fault.
involves updating the corresponding page tables followed by accesses to the
pages in question. This sequence is subject to the situation exactly described
in the "AMD64 Architecture Programmer's Manual Volume 2: System Programming"
rev. 3.23, "7.3.1 Special Coherency Considerations" [1, p. 171 f.]. Therefore,
issuing the INVLPG right after modifying the PTE bits is crucial (see also
r269050).
For the amd64 PMAP code, the order of instructions was already correct. The
above fact still is worth documenting, though.
1: http://amd-dev.wpengine.netdna-cdn.com/wordpress/media/2012/10/24593_APM_v21.pdf
Reviewed by: alc
Sponsored by: Bally Wulff Games & Entertainment GmbH
The faulting instruction needs to be restarted when the exception handler
is done handling the fault. bhyve now does this correctly by setting
'vmexit[vcpu].inst_length' to zero so the %rip is not advanced.
A minor complication is that the fault injection APIs are used by instruction
emulation code that is shared by vmm.ko and bhyve. Thus the argument that
refers to 'struct vm *' in kernel or 'struct vmctx *' in userspace needs to
be loosely typed as a 'void *'.
Setting PSE together with PAE or in long mode just makes the PSE bit
completely ignored, so don't set it.
Sponsored by: Citrix Systems R&D
Reviewed by: kib
A nested exception condition arises when a second exception is triggered while
delivering the first exception. Most nested exceptions can be handled serially
but some are converted into a double fault. If an exception is generated during
delivery of a double fault then the virtual machine shuts down as a result of
a triple fault.
vm_exit_intinfo() is used to record that a VM-exit happened while an event was
being delivered through the IDT. If an exception is triggered while handling
the VM-exit it will be treated like a nested exception.
vm_entry_intinfo() is used by processor-specific code to get the event to be
injected into the guest on the next VM-entry. This function is responsible for
deciding the disposition of nested exceptions.
instruction emulation [1].
Fix bug in emulation of opcode 0x8A where the destination is a legacy high
byte register and the guest vcpu is in 32-bit mode. Prior to this change
instead of modifying %ah, %bh, %ch or %dh the emulation would end up
modifying %spl, %bpl, %sil or %dil instead.
Add support for moffsets by treating it as a 2, 4 or 8 byte immediate value
during instruction decoding.
Fix bug in verify_gla() where the linear address computed after decoding
the instruction was not being truncated to the effective address size [2].
Tested by: Leon Dang [1]
Reported by: Peter Grehan [2]
Sponsored by: Nahanni Systems
the upstream implementation and helps ensure that a trap induced by tracing
fbt::trap:entry is handled without recursively generating another trap.
This makes it possible to run most (but not all) of the DTrace tests under
common/safety/ without triggering a kernel panic.
Submitted by: Anton Rang <anton.rang@isilon.com> (original version)
Phabric: D95
ptrace_set_pc() use the correct return to userspace using iret.
The signal return, PT_CONTINUE (which in fact uses signal return path)
set the pcb flag already. The setcontext(2) enforces iret return when
%rip is incorrect. Due to this, the change is redundand, but is made
to ensure that no path which modifies context, forgets to set
PCB_FULL_IRET.
Inspired by: CVE-2014-4699
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
several reasons for this change:
pmap_change_wiring() has never (in my memory) been used to set the wired
attribute on a virtual page. We have always used pmap_enter() to do that.
Moreover, it is not really safe to use pmap_change_wiring() to set the wired
attribute on a virtual page. The description of pmap_change_wiring() says
that it assumes the existence of a mapping in the pmap. However, non-wired
mappings may be reclaimed by the pmap at any time. (See pmap_collect().)
Many implementations of pmap_change_wiring() will crash if the mapping does
not exist.
pmap_unwire() accepts a range of virtual addresses, whereas
pmap_change_wiring() acts upon a single virtual page. Since we are
typically unwiring a range of virtual addresses, pmap_unwire() will be more
efficient. Moreover, pmap_unwire() allows us to unwire superpage mappings.
Previously, we were forced to demote the superpage mapping, because
pmap_change_wiring() only allowed us to express the unwiring of a single
base page mapping at a time. This added to the overhead of unwiring for
large ranges of addresses, including the implicit unwiring that occurs at
process termination.
Implementations for arm and powerpc will follow.
Discussed with: jeff, marcel
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
The UEFI framebuffer driver vt_efifb requires vt(4), so add a mechanism
for the startup routine to set the preferred console. This change is
ugly because console init happens very early in the boot, making a
cleaner interface difficult. This change is intended only to facilitate
the sc(4) / vt(4) transition, and can be reverted once vt(4) is the
default.
These changes prevent sysctl(8) from returning proper output,
such as:
1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.
Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
This is different than the amount shown for the process e.g. by
/usr/bin/top - that is the mappings faulted in by the mmap'd region
of guest memory.
The values can be fetched with bhyvectl
# bhyvectl --get-stats --vm=myvm
...
Resident memory 413749248
Wired memory 0
...
vmm_stat.[ch] -
Modify the counter code in bhyve to allow direct setting of a counter
as opposed to incrementing, and providing a callback to fetch a
counter's value.
Reviewed by: neel
context into memory for the kernel threads which called
fpu_kern_thread(9). This allows the fpu_kern_enter() callers to not
check for is_fpu_kern_thread() to get the optimization.
Apply the flag to padlock(4) and aesni(4). In aesni_cipher_process(),
do not leak FPU context state on error.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
the queue where to enqueue pages that are going to be unwired.
- Add stronger checks to the enqueue/dequeue for the pagequeues when
adding and removing pages to them.
Of course, for unmanaged pages the queue parameter of vm_page_unwire() will
be ignored, just as the active parameter today.
This makes adding new pagequeues quicker.
This change effectively modifies the KPI. __FreeBSD_version will be,
however, bumped just when the full cache of free pages will be
evicted.
Sponsored by: EMC / Isilon storage division
Reviewed by: alc
Tested by: pho
This is needed for Xen PV(H) guests, since there's no hardware lapic
available on this kind of domains. This commit should not change
functionality.
Sponsored by: Citrix Systems R&D
Reviewed by: jhb
Approved by: gibbs
amd64/include/cpu.h:
amd64/amd64/mp_machdep.c:
i386/include/cpu.h:
i386/i386/mp_machdep.c:
- Remove lapic_ipi_vectored hook from cpu_ops, since it's now
implemented in the lapic hooks.
amd64/amd64/mp_machdep.c:
i386/i386/mp_machdep.c:
- Use lapic_ipi_vectored directly, since it's now an inline function
that will call the appropiate hook.
x86/x86/local_apic.c:
- Prefix bare metal public lapic functions with native_ and mark them
as static.
- Define default implementation of apic_ops.
x86/include/apicvar.h:
- Declare the apic_ops structure and create inline functions to
access the hooks, so the change is transparent to existing users of
the lapic_ functions.
x86/xen/hvm.c:
- Switch to use the new apic_ops.
is sampled "atomically". Any interrupts after this point will be held pending
by the CPU until the guest starts executing and will immediately trigger a
#VMEXIT.
Reviewed by: Anish Gupta (akgupt3@gmail.com)
injected into the guest. This allows the hypervisor to inject another
ExtINT or APIC vector as soon as the guest is able to process interrupts.
This change is not to address any correctness issue but to guarantee that
any pending APIC vector that was preempted by the ExtINT will be injected
as soon as possible. Prior to this change such pending interrupts could be
delayed until the next VM exit.
Handle ExtINT injection for SVM. The HPET emulation
will inject a legacy interrupt at startup, and if this
isn't handled, will result in the HLT-exit code assuming
there are outstanding ExtINTs and return without sleeping.
svm_inj_interrupts() needs more changes to bring it up
to date with the VT-x version: these are forthcoming.
Reviewed by: neel
Linux guests accept the values in this register, while *BSD
guests reprogram it. Default values of zero correspond to
PAT_UNCACHEABLE, resulting in glacial performance.
Thanks to Willem Jan Withagen for first reporting this and
helping out with the investigation.
a partially populated reservation becomes fully populated, and decrease this
field when a fully populated reservation becomes partially populated.
Use this field to simplify the implementation of pmap_enter_object() on
amd64, arm, and i386.
On all architectures where we support superpages, the cost of creating a
superpage mapping is roughly the same as creating a base page mapping. For
example, both kinds of mappings entail the creation of a single PTE and PV
entry. With this in mind, use the page size field to make the
implementation of vm_map_pmap_enter(..., MAP_PREFAULT_PARTIAL) a little
smarter. Previously, if MAP_PREFAULT_PARTIAL was specified to
vm_map_pmap_enter(), that function would only map base pages. Now, it will
create up to 96 base page or superpage mappings.
Reviewed by: kib
Sponsored by: EMC / Isilon Storage Division
Remove CR2 save/restore - the guest restore/save is done
in hardware, and there is no need to save/restore the host
version (same as VT-x).
Submitted by: neel (SVM segment descriptor 'P' bit code)
Reviewed by: neel
- use the new virtual APIC page
- update to current bhyve APIs
Tested by Anish with multiple FreeBSD SMP VMs on a Phenom,
and verified by myself with light FreeBSD VM testing
on a Sempron 3850 APU.
The issues reported with Linux guests are very likely to still
be here, but this sync eliminates the skew between the
project branch and CURRENT, and should help to determine
the causes.
Some follow-on commits will fix minor cosmetic issues.
Submitted by: Anish Gupta (akgupt3@gmail.com)
it implicitly in vmm.ko.
Add ioctl VM_GET_CPUS to get the current set of 'active' and 'suspended' cpus
and display them via /usr/sbin/bhyvectl using the "--get-active-cpus" and
"--get-suspended-cpus" options.
This is in preparation for being able to reset virtual machine state without
having to destroy and recreate it.
correctly prepare KGSBASE msr to restore the user descriptor base on
the last swapgs during return to usermode.
Reported and tested by: peterj
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
guest for which the rules regarding xsetbv emulation are known. In
particular future extensions like AVX-512 have interdependencies among
feature bits that could allow a guest to trigger a GP# in the host with
the current approach of allowing anything the host supports.
- Add proper checking of Intel MPX and AVX-512 XSAVE features in the
xsetbv emulation and allow these features to be exposed to the guest if
they are enabled in the host.
- Expose a subset of known-safe features from leaf 0 of the structured
extended features to guests if they are supported on the host including
RDFSBASE/RDGSBASE, BMI1/2, AVX2, AVX-512, HLE, ERMS, and RTM. Aside
from AVX-512, these features are all new instructions available for use
in ring 3 with no additional hypervisor changes needed.
Reviewed by: neel
API function 'vie_calculate_gla()'.
While the current implementation is simplistic it forms the basis of doing
segmentation checks if the guest is in 32-bit protected mode.
of the guest linear address space. These APIs in turn use a new ioctl
'VM_GLA2GPA' to convert the guest linear address to guest physical.
Use the new copyin/copyout APIs when emulating ins/outs instruction in
bhyve(8).
'struct vm_guest_paging'.
Check for canonical addressing in vmm_gla2gpa() and inject a protection
fault into the guest if a violation is detected.
If the page table walk is restarted in vmm_gla2gpa() then reset 'ptpphys' to
point to the root of the page tables.
indicate the faulting linear address.
If the guest PML4 entry has the PG_PS bit set then inject a page fault into
the guest with the PGEX_RSV bit set in the error_code.
Get rid of redundant checks for the PG_RW violations when walking the page
tables.
the UART FIFO.
The emulation is constrained in a number of ways: 64-bit only, doesn't check
for all exception conditions, limited to i/o ports emulated in userspace.
Some of these constraints will be relaxed in followup commits.
Requested by: grehan
Reviewed by: tychon (partially and a much earlier version)
the proper ICWx initialization sequence. It assumes, probably correctly, that
the boot firmware has done the 8259 initialization.
Since grub-bhyve does not initialize the 8259 this write to the mask register
takes a code path in which 'error' remains uninitialized (ready=0,icw_num=0).
Fix this by initializing 'error' at the start of the function.
These masks are documented in the Intel Architecture Instruction Set
Extensions Programming Reference (March 2014).
Reviewed by: kib
MFC after: 1 month
Set the accessed and dirty bits in the page table entry. If it fails then
restart the page table walk from the beginning. This might happen if another
vcpu modifies the page tables simultaneously.
Reviewed by: alc, kib
to a guest physical address.
PG_PS (page size) field is valid only in a PDE or a PDPTE so it is now
checked only in non-terminal paging entries.
Ignore the upper 32-bits of the CR3 for PAE paging.
- inserting frame enter/leave sequences
- restructuring the vmx_enter_guest routine so that it subsumes
the vm_exit_guest block, which was the #vmexit RIP and not a
callable routine.
Reviewed by: neel
MFC after: 3 weeks
XSAVE Extended Features for AVX512 and MPX (Memory Protection Extensions).
Obtained from: Intel's Instruction Set Extensions Programming Reference
(March 2014)
the legacy 8259A PICs.
- Implement an ICH-comptabile PCI interrupt router on the lpc device with
8 steerable pins configured via config space access to byte-wide
registers at 0x60-63 and 0x68-6b.
- For each configured PCI INTx interrupt, route it to both an I/O APIC
pin and a PCI interrupt router pin. When a PCI INTx interrupt is
asserted, ensure that both pins are asserted.
- Provide an initial routing of PCI interrupt router (PIRQ) pins to
8259A pins (ISA IRQs) and initialize the interrupt line config register
for the corresponding PCI function with the ISA IRQ as this matches
existing hardware.
- Add a global _PIC method for OSPM to select the desired interrupt routing
configuration.
- Update the _PRT methods for PCI bridges to provide both APIC and legacy
PRT tables and return the appropriate table based on the configured
routing configuration. Note that if the lpc device is not configured, no
routing information is provided.
- When the lpc device is enabled, provide ACPI PCI link devices corresponding
to each PIRQ pin.
- Add a VMM ioctl to adjust the trigger mode (edge vs level) for 8259A
pins via the ELCR.
- Mark the power management SCI as level triggered.
- Don't hardcode the number of elements in Packages in the source for
the DSDT. iasl(8) will fill in the actual number of elements, and
this makes it simpler to generate a Package with a variable number of
elements.
Reviewed by: tycho
with all bits set to 1 beyond the I/O permission bitmap.
Prior to this change accessing I/O ports [0xFFF8-0xFFFF] would trigger a
#GP fault even though the I/O bitmap allowed access to those ports.
For more details see section "I/O Permission Bit Map" in the Intel SDM, Vol 1.
Reviewed by: kib
freebsd-current. These CPU speed control techniques are usually unhelpful
at best. For now, continue building the relevant code into GENERIC so that
it can trivially be re-enabled at runtime if anyone wants it.
MFC after: 1 month
This is derived from the mps(4) driver, but it supports only the 12Gb
IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108.
Some notes about this driver:
o The 12Gb hardware can do "FastPath" I/O, and that capability is included in
this driver.
o WarpDrive functionality has been removed, since it isn't supported in
the 12Gb driver interface.
o The Scatter/Gather list handling code is significantly different between
the 6Gb and 12Gb hardware. The 12Gb boards support IEEE Scatter/Gather
lists.
Thanks to LSI for developing and testing this driver for FreeBSD.
share/man/man4/mpr.4:
mpr(4) man page.
sys/dev/mpr/*:
mpr(4) driver files.
sys/modules/Makefile,
sys/modules/mpr/Makefile:
Add a module Makefile for the mpr(4) driver.
sys/conf/files:
Add the mpr(4) driver.
sys/amd64/conf/GENERIC,
sys/i386/conf/GENERIC,
sys/mips/conf/OCTEON1,
sys/sparc64/conf/GENERIC:
Add the mpr(4) driver to all config files that currently
have the mps(4) driver.
sys/ia64/conf/GENERIC:
Add the mps(4) and mpr(4) drivers to the ia64 GENERIC
config file.
sys/i386/conf/XEN:
Exclude the mpr module from building here.
Submitted by: Steve McConnell <Stephen.McConnell@lsi.com>
MFC after: 3 days
Tested by: Chris Reeves <chrisr@spectralogic.com>
Sponsored by: LSI, Spectra Logic
Relnotes: LSI 12Gb SAS driver mpr(4) added
lindev(4) was only used to provide /dev/full which is now a standard feature of
FreeBSD. /dev/full was never linux-specific and provides a generally useful
feature.
Document this in UPDATING and bump __FreeBSD_version. This will be documented
in the PH shortly.
Reported by: jkim
to sleep permanently by executing a HLT with interrupts disabled.
When this condition is detected the guest with be suspended with a reason of
VM_SUSPEND_HALT and the bhyve(8) process will exit.
Tested by executing "halt" inside a RHEL7-beta guest.
Discussed with: grehan@
Reviewed by: jhb@, tychon@
the 'HLT' instruction. This condition was detected by 'vm_handle_hlt()' and
converted into the SPINDOWN_CPU exitcode . The bhyve(8) process would exit
the vcpu thread in response to a SPINDOWN_CPU and when the last vcpu was
spun down it would reset the virtual machine via vm_suspend(VM_SUSPEND_RESET).
This functionality was broken in r263780 in a way that made it impossible
to kill the bhyve(8) process because it would loop forever in
vm_handle_suspend().
Unbreak this by removing the code to spindown vcpus. Thus a 'halt' from
a Linux guest will appear to be hung but this is consistent with the
behavior on bare metal. The guest can be rebooted by using the bhyvectl
options '--force-reset' or '--force-poweroff'.
Reviewed by: grehan@
by adding an argument to the VM_SUSPEND ioctl that specifies how the virtual
machine should be suspended, viz. VM_SUSPEND_RESET or VM_SUSPEND_POWEROFF.
The disposition of VM_SUSPEND is also made available to the exit handler
via the 'u.suspended' member of 'struct vm_exit'.
This capability is exposed via the '--force-reset' and '--force-poweroff'
arguments to /usr/sbin/bhyvectl.
Discussed with: grehan@
checks for special pcid values in invlpg_pcid_handler(). Forst check
for special values, and only then do PCID-specific page invalidation.
Minor fix to the style compliance, declare local variable at the
function start.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
kernel will now boot on both BIOS and EFI systems without modification.
Equivalent functionality in GENERIC requires making vt(9) the default console
driver, which is probably appropriate at this point.
the cpufreq code. Replace its use with smp_started. There's at least
one userland tool that still looks at the kern.smp.active sysctl, so
preserve it but point it to smp_started as well.
Discussed with: peter, jhb
MFC after: 3 days
Obtained from: Netflix
replace the vt_vga driver with vt_efifb.
This is intended to help with snapshot builds only.
There is no intention to MFC this commit.
Sponsored by: The FreeBSD Foundation
Some of the code in xen-locore.S was picked from Cherry G. Mathew
amd64 Xen PV branch, but I've failed to set the proper copyright, so
do it now.
Approved by: gibbs
Status and Control register at port 0x61.
Be more conservative about "catching up" callouts that were supposed
to fire in the past by skipping an interrupt if it was
scheduled too far in the past.
Restore the PIT ACPI DSDT entries and add an entry for NMISC too.
Approved by: neel (co-mentor)
'struct vmxctx'. It is preserved on the host stack across a guest entry
and exit and just restoring the host's '%rsp' is sufficient.
Pointed out by: grehan@
- remove redundant code
- remove erroneous setting of the error return
in vmmdev_ioctl()
- use style(9) initialization
- in vmx_inject_pir(), document the race condition
that the final conditional statement was detecting,
Tested with both gcc and clang builds.
Reviewed by: neel
correct for the pirbase test (since I'd have thought we'd need to do
something even when the offset is 0 and that test looks like a
misguided attempt to not use an uninitialized variable), but it is at
least the same as today.
My PCI RID changes somehow got intermixed with my PCI ARI patch when I
committed it. I may have accidentally applied a patch to a non-clean
working tree. Revert everything while I figure out what went wrong.
Pointy hat to: rstone
is already correctly reset to the FPU user save area, only PCB_KERNFPU
flag might leak from old thread state into the new state.
For creation of the user-mode thread, the change is nop since
corresponding syscall code does not use FPU. On the other hand,
creation of a kernel thread forks from a thread selected arbitrary
from proc0, which might use FPU.
Reported and tested by: Chris Torek <torek@torek.net>
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
- When clearing a bit for a cpuid in pmap->pm_save, ensure that the
cpuid is not set in pm_active. The pm_save indicates which CPUs may
have cached translations for given PCID, which implies that a CPU
executing with the given pmap active have the translations
cached. [1]
- In smp_masked_invltlb(), pass pmap to smp_targeted_tlb_shootdown(). [1]
- In invlrng_handler(), check for the special values of pcid (0 and
-1) and do corresponding global or total invalidations before
checking for performing PCID-specific range invalidation with
INVPCID_ADDR. [2]
- In invltlb_pcid_handler(), do not read %cr3 unless needed. [2]
- Do minor style tweaks. [2]
Submitted by: Henrik Gulbrandsen <henrik@gulbra.net> [1]
Other parts sponsored by: The FreeBSD Foundation [2]
Tested by: Henrik Gulbrandsen, pho
MFC after: 1 week
With this change (and loader.efi from the projects/uefi branch) we can now
boot under qemu using the OVMF UEFI firmware image with the limitation
that a serial console is required.
(This is largely r246337 from the projects/uefi branch.)
Sponsored by: The FreeBSD Foundation
from any context i.e., it is not required to be called from a vcpu thread. The
ioctl simply sets a state variable 'vm->suspend' to '1' and returns.
The vcpus inspect 'vm->suspend' in the run loop and if it is set to '1' the
vcpu breaks out of the loop with a reason of 'VM_EXITCODE_SUSPENDED'. The
suspend handler waits until all 'vm->active_cpus' have transitioned to
'vm->suspended_cpus' before returning to userspace.
Discussed with: grehan
add it in kern.mk, but only if we're using clang. While this
option is supported by both clang and gcc, in the future there
may be changes to clang which change the defaults that require
a tweak to build our kernel such that other tools in our tree
will work. Set a good example by forcing -gdwarf-2 only for
clang builds, and only if the user hasn't specified another
dwarf level already. Update UPDATING to reflect the changed
state of affairs. This also keeps us from having to update
all the ARM kernels to add this, and also keeps us from
in the future having to update all the MIPS kernels and is
one less place the user will have to know to do something
special for clang and one less thing developers will need
to do when moving an architecture to clang.
Reviewed by: ian@
MFC after: 1 week
To reduce the diff struct pcu.cnt field was not renamed, so
PCPU_OP(cnt.field) is still used. pc_cnt and pcpu are also used in
kvm(3) and vmstat(8). The goal was to not affect externally used KPI.
Bump __FreeBSD_version_ in case some out-of-tree module/code relies on the
the global cnt variable.
Exp-run revealed no ports using it directly.
No objection from: arch@
Sponsored by: EMC / Isilon Storage Division
faults.
First, for accesses to direct map region should check for the limit by
which direct map is instantiated.
Second, for accesses to the kernel map, success returned from the
kernacc(9) does not guarantee that consequent attempt to read or write
to the checked address succeed, since other thread might invalidate
the address meantime. Add a new thread private flag TDP_DEVMEMIO,
which instructs vm_fault() to return error when fault happens on the
MAP_ENTRY_NOFAULT entry, instead of panicing. The trap handler would
then see a page fault from access, and recover in normal way, making
/dev/mem access safer.
Remove GIANT_REQUIRED from the amd64 memrw(), since it is not needed
and having Giant locked does not solve issues for amd64.
Note that at least the second issue exists on other architectures, and
requires similar patching for md code.
Reported and tested by: clusteradm (gjb, sbruno)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
called with interrupts enabled. Calling fasttrap_pid_probe() with interrupts
disabled can lead to deadlock if fasttrap writes to the process' address
space.
Reviewed by: rpaulo
MFC after: 3 weeks
blocked on it.
This is done by issuing a wakeup after clearing the 'vcpuid' from 'active_cpus'.
Also, use CPU_CLR_ATOMIC() to guarantee visibility of the updated 'active_cpus'
across all host cpus.
helps when bits and pieces of GENERIC from i386 or amd64 are cut and
pasted into other architecture's config files (which in the case of
ARM had gotten rather akimbo).
further refinement is required as some device drivers intended to be
portable over FreeBSD versions rely on __FreeBSD_version to decide whether
to include capability.h.
MFC after: 3 weeks
attributed if an ExtINT arrives during interrupt injection.
Also, fix a spurious interrupt if the PIC tries to raise an interrupt
before the outstanding one is accepted.
Finally, improve the PIC interrupt latency when another interrupt is
raised immediately after the outstanding one is accepted by creating a
vmexit rather than waiting for one to occur by happenstance.
Approved by: neel (co-mentor)
linking NIC Receive Side Scaling (RSS) to the network stack's
connection-group implementation. This prototype (and derived patches)
are in use at Juniper and several other FreeBSD-using companies, so
despite some reservations about its maturity, merge the patch to the
base tree so that it can be iteratively refined in collaboration rather
than maintained as a set of gradually diverging patch sets.
(1) Merge a software implementation of the Toeplitz hash specified in
RSS implemented by David Malone. This is used to allow suitable
pcbgroup placement of connections before the first packet is
received from the NIC. Software hashing is generally avoided,
however, due to high cost of the hash on general-purpose CPUs.
(2) In in_rss.c, maintain authoritative versions of RSS state intended
to be pushed to each NIC, including keying material, hash
algorithm/ configuration, and buckets. Provide software-facing
interfaces to hash 2- and 4-tuples for IPv4 and IPv6 using both
the RSS standardised Toeplitz and a 'naive' variation with a hash
efficient in software but with poor distribution properties.
Implement rss_m2cpuid()to be used by netisr and other load
balancing code to look up the CPU on which an mbuf should be
processed.
(3) In the Ethernet link layer, allow netisr distribution using RSS as
a source of policy as an alternative to source ordering; continue
to default to direct dispatch (i.e., don't try and requeue packets
for processing on the 'right' CPU if they arrive in a directly
dispatchable context).
(4) Allow RSS to control tuning of connection groups in order to align
groups with RSS buckets. If a packet arrives on a protocol using
connection groups, and contains a suitable hardware-generated
hash, use that hash value to select the connection group for pcb
lookup for both IPv4 and IPv6. If no hardware-generated Toeplitz
hash is available, we fall back on regular PCB lookup risking
contention rather than pay the cost of Toeplitz in software --
this is a less scalable but, at my last measurement, faster
approach. As core counts go up, we may want to revise this
strategy despite CPU overhead.
Where device drivers suitably configure NICs, and connection groups /
RSS are enabled, this should avoid both lock and line contention during
connection lookup for TCP. This commit does not modify any device
drivers to tune device RSS configuration to the global RSS
configuration; patches are in circulation to do this for at least
Chelsio T3 and Intel 1G/10G drivers. Currently, the KPI for device
drivers is not particularly robust, nor aware of more advanced features
such as runtime reconfiguration/rebalancing. This will hopefully prove
a useful starting point for refinement.
No MFC is scheduled as we will first want to nail down a more mature
and maintainable KPI/KBI for device drivers.
Sponsored by: Juniper Networks (original work)
Sponsored by: EMC/Isilon (patch update and merge)
AppleTalk was a network transport protocol for Apple Macintosh devices
in 80s and then 90s. Starting with Mac OS X in 2000 the AppleTalk was
a legacy protocol and primary networking protocol is TCP/IP. The last
Mac OS X release to support AppleTalk happened in 2009. The same year
routing equipment vendors (namely Cisco) end their support.
Thus, AppleTalk won't be supported in FreeBSD 11.0-RELEASE.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
New ioctls VM_ISA_ASSERT_IRQ, VM_ISA_DEASSERT_IRQ and VM_ISA_PULSE_IRQ
can be used to manipulate the pic, and optionally the ioapic, pin state.
Reviewed by: jhb, neel
Approved by: neel (co-mentor)
AP startup on PVH follows the PV method, so we need to add a hook in
order to diverge from bare metal.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
amd64/amd64/machdep.c:
- Add hook for start_all_aps on native (using native_start_all_aps
defined in mp_machdep).
amd64/amd64/mp_machdep.c:
- Make some variables global because they will also be used by the
Xen PVH AP startup code.
- Use the start_all_aps hook to start APs.
- Rename start_all_aps to native_start_all_aps.
amd64/include/smp.h:
- Add declaration for native_start_all_aps.
x86/include/init.h:
- Declare start_all_aps hook in init_ops.
x86/xen/pv.c:
- Pick external declarations from mp_machdep.
- Introduce Xen PV code to start APs on PVH.
- Set start_all_aps init hook to use the Xen PVH implementation.
This hook will only be implemented for bare metal, Xen doesn't require
any bootstrap code since APs are started in long mode with paging
enabled.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
amd64/amd64/machdep.c:
- Set mp_bootaddress hook for bare metal.
x86/include/init.h:
- Define mp_bootaddress in init_ops.
Currently XEN (PV) and XENHVM (PVHVM) ports use different ways to
issue hypercalls, unify this by filling the hypercall_page under HVM
also.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
amd64/include/xen/hypercall.h:
- Unify Xen hypercall code by always using the PV way.
i386/i386/locore.s:
- Define hypercall_page on i386 XENHVM.
x86/xen/hvm.c:
- Fill hypercall_page on XENHVM kernels using the HVM method (only
when running as an HVM guest).
e820 memory map is fetched using a hypercall under Xen PVH, so add a
hook to init_ops in oder to diverge from bare metal and implement a
Xen variant.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
x86/include/init.h:
- Add a parse_memmap hook to init_ops, that will be called to fetch
and parse the memory map.
amd64/amd64/machdep.c:
- Decouple the fetch and the parse of the memmap, so the parse
function can be shared with Xen code.
- Move code around in order to implement the parse_memmap hook.
amd64/include/pc/bios.h:
- Declare bios_add_smap_entries (implemented in machdep.c).
x86/xen/pv.c:
- Implement fetching of e820 memmap when running as a PVH guest by
using the XENMEM_memory_map hypercall.
When running as a PVH guest, there's no emulated i8254, so we need to
use the Xen PV timer as the early source for DELAY. This change allows
for different implementations of the early DELAY function and
implements a Xen variant for it.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
dev/xen/timer/timer.c:
dev/xen/timer/timer.h:
- Implement Xen early delay functions using the PV timer and declare
them.
x86/include/init.h:
- Add hooks for early clock source initialization and early delay
functions.
i386/i386/machdep.c:
pc98/pc98/machdep.c:
amd64/amd64/machdep.c:
- Set early delay hooks to use the i8254 on bare metal.
- Use clock_init (that will in turn make use of init_ops) to
initialize the early clock source.
amd64/include/clock.h:
i386/include/clock.h:
- Declare i8254_delay and clock_init.
i386/xen/clock.c:
- Rename DELAY to i8254_delay.
x86/isa/clock.c:
- Introduce clock_init that will take care of initializing the early
clock by making use of the init_ops hooks.
- Move non ISA related delay functions to the newly introduced delay
file.
x86/x86/delay.c:
- Add moved delay related functions.
- Implement generic DELAY function that will use the init_ops hooks.
x86/xen/pv.c:
- Set PVH hooks for the early delay related functions in init_ops.
conf/files.amd64:
conf/files.i386:
conf/files.pc98:
- Add delay.c to the kernel build.
Add hooks to amd64 in order to have diverging implementations, since
on Xen PV the metadata is passed to the kernel in a different form.
Approbed by: gibbs
Sponsored by: Citrix Systems R&D
amd64/amd64/machdep.c:
- Define init_ops for native.
- Put native code inside of native_parse_preload_data hook.
- Call the parse_preload_data in order to fill the metadata info.
x86/include/init.h:
- Declare the init_ops struct.
x86/xen/pv.c:
- Declare xen_init_ops that contains the Xen PV implementation of
init_ops.
- Implement the parse_preload_data for Xen PVH, the info is fetched
from HYPERVISOR_start_info->cmd_line as provided by Xen.
Add the PV/PVH entry point and the low level functions for PVH
early initialization.
Approved by: gibbs
Sponsored by: Citrix Systems R&D
amd64/amd64/genassym.c:
- Add __FreeBSD_version define to assym.s so it can be used for the
Xen notes.
amd64/amd64/locore.S:
- Make bootstack global so it can be used from Xen kernel entry
point.
amd64/amd64/xen-locore.S:
- Add Xen notes to the kernel.
- Add the Xen PV entry point, that is going to call hammer_time_xen.
amd64/include/asmacros.h:
- Add ELFNOTE macros.
i386/xen/xen_machdep.c:
- Define HYPERVISOR_start_info for the XEN i386 PV port, which is
going to be used in some shared code between PV and PVH.
x86/xen/hvm.c:
- Define HYPERVISOR_start_info for the PVH port.
x86/xen/pv.c:
- Introduce hammer_time_xen which is going to perform early setup for
Xen PVH:
- Setup shared Xen variables start_info, shared_info and
xen_store.
- Set guest type.
- Create initial page tables as FreeBSD expects to find them.
- Call into native init function (hammer_time).
xen/xen-os.h:
- Declare HYPERVISOR_start_info.
conf/files.amd64:
- Add amd64/amd64/locore.S and x86/xen/pv.c to the list of files.
Move asm IPIs handlers to C code, so both Xen and native IPI handlers
share the same code.
Reviewed by: jhb
Approved by: gibbs
Sponsored by: Citrix Systems R&D
amd64/amd64/apic_vector.S:
i386/i386/apic_vector.s:
- Remove asm coded IPI handlers and instead call the newly introduced
C variants.
amd64/amd64/mp_machdep.c:
i386/i386/mp_machdep.c:
- Add C coded clones to the asm IPI handlers (moved from
x86/xen/hvm.c).
i386/include/smp.h:
amd64/include/smp.h:
- Add prototypes for the C IPI handlers.
x86/xen/hvm.c:
- Move the C IPI handlers to mp_machdep and call those in the Xen IPI
handlers.
i386/xen/mp_machdep.c:
- Add dummy IPI handlers to the i386 Xen PV port (this port doesn't
support SMP).
There are a number of reports of userspace application crashes that
are "solved" by setting vm.pmap.pcid_enabled=0, including Java and the
x11/mate-terminal port (PR ports/184362).
I originally planned to disable this only in stable/10 (in r262753), but
it has been pointed out that additional crash reports on HEAD are not
likely to provide new insight into the problem. The feature can easily
be enabled for testing.
