On powerpc64, pointers are 64 bits, so casting from uint32_t changes the integer
width.
The alternative was to use register_t, but I didn't see register_t used as
argument type for any other functions, though didn't look too closely. u_long
was an acceptable alternative. On 64-bit it's 64 bits, on 32-bit it's 32 bits.
powerpc_init() initializes the mmu. Since this may clear pages via
pmap_zero_page(), set the cacheline size before calling into it, so
pmap_zero_page() has the right cacheline size. This isn't completely
necessary now, but will be when 64-bit book-e is completed.
For rs6000, most memory insns and addi/addis do not allow GPR0 for RA
(they use literal zero there instead). So use a 'b' constraint to make
sure to have a base register other than GPR0.
GCC-4.7 and up handles this with allocating r9 instead of r0.
providing compiled-in static environment data that is used instead of any
data passed in from a boot loader.
Previously 'env' worked only on i386 and arm xscale systems, because it
required the MD startup code to examine the global envmode variable and
decide whether to use static_env or an environment obtained from the boot
loader, and set the global kern_envp accordingly. Most startup code wasn't
doing so. Making things even more complex, some mips startup code uses an
alternate scheme that involves calling init_static_kenv() to pass an empty
buffer and its size, then uses a series of kern_setenv() calls to populate
that buffer.
Now all MD startup code calls init_static_kenv(), and that routine provides
a single point where envmode is checked and the decision is made whether to
use the compiled-in static_kenv or the values provided by the MD code.
The routine also continues to serve its original purpose for mips; if a
non-zero buffer size is passed the routine installs the empty buffer ready
to accept kern_setenv() values. Now if the size is zero, the provided buffer
full of existing env data is installed. A NULL pointer can be passed if the
boot loader provides no env data; this allows the static env to be installed
if envmode is set to do so.
Most of the work here is a near-mechanical change to call the init function
instead of directly setting kern_envp. A notable exception is in xen/pv.c;
that code was originally installing a buffer full of preformatted env data
along with its non-zero size (like mips code does), which would have allowed
kern_setenv() calls to wipe out the preformatted data. Now it passes a zero
for the size so that the buffer of data it installs is treated as
non-writeable.
LBC block size can only be up to 4GB. The existing code already clamps it, but
mixes unsigned long and uint32_t. This works on 32-bit targets, but not 64-bit,
so isn't completely correct. This fixes the type confusion.
Newer Book-E cores (e500mc, e5500, e6500) do not support the WE bit in the MSR,
and instead delegate CPU idling to the SoC.
Perhaps in the future the QORIQ_DPAA option for the mpc85xx platform will become
a subclass, which will eliminate most of the #ifdef's.
This includes the following changes:
* SMP kickoff for QorIQ (tested on P5020)
* Errata fixes for some silicon revisions
* Enables L2 (and L3 if available) caches
Obtained from: Semihalf
Sponsored by: Alex Perez/Inertial Computing
There's no need for it to be in asm. Also, by writing in C, and marking it
static in pmap.c, it saves a branch to the function itself, as it's only used in
one location. The generated asm is virtually identical to the handwritten code.
Summary:
With some additional changes for AIM, that could also support much
larger physmem sizes. Given that 32-bit AIM is more or less obsolete, though,
it's not worth it at this time.
Differential Revision: https://reviews.freebsd.org/D4345
into a new function that other platforms can share.
This creates a new ofw_reg_to_paddr() function (in a new ofw_subr.c file)
that contains most of the existing ppc implementation, mostly unchanged.
The ppc code now calls the new MI code from the MD code, then creates a
ppc-specific bus_space mapping from the results. The new arm implementation
does the same in an arm-specific way.
This also moves the declaration of OF_decode_addr() from ofw_machdep.h to
openfirm.h, except on sparc64 which uses a different function signature.
This will help all FDT platforms to set up early console access using
OF_decode_addr().
e500mc, e5500, and e6500 all use the normal FPU, with the same behavior as AIM
hardware. e6500 also supports Altivec, so, although we don't yet have e6500
hardware to test on, add these IVORs as well. Theoretically, since it boots the
same as a e5500, it should work, single-threaded, single-core, with full altivec
support as of this commit.
With this commit, and some other patches to be committed shortly FreeBSD now
boots on the P5020, single-core, all the way to user space, and should boot just
fine on e500mc.
Relnotes: Yes (e500mc, e5500 support)
Sponsored by: Alex Perez/Inertial Computing
sysent.
sv_prepsyscall is unused.
sv_sigsize and sv_sigtbl translate signal number from the FreeBSD
namespace into the ABI domain. It is only utilized on i386 for iBCS2
binaries. The issue with this approach is that signals for iBCS2 were
delivered with the FreeBSD signal frame layout, which does not follow
iBCS2. The same note is true for any other potential user if
sv_sigtbl. In other words, if ABI needs signal number translation, it
really needs custom sv_sendsig method instead.
Sponsored by: The FreeBSD Foundation
lwsync instruction, which does not provide Store/Load barrier. Fix
this by using "full" sync barrier for mb().
atomic_store_rel() does not need full barrier, change mb() call there
to the lwsync instruction if not hitting the known CPU erratas
(i.e. on 32bit). Provide powerpc_lwsync() helper to isolate the
lwsync/sync compile time selection, and use it in atomic_store_rel()
and several other places which duplicate the code.
Noted by: alc
Reviewed and tested by: nwhitehorn
Sponsored by: The FreeBSD Foundation
new, simplified, ELF ABI that avoids some of the stranger aspects of the
existing 64-bit PowerPC ABI (function descriptors, in particular). Actually
generating such executables requires a new version of binutils and a newer
compiler (either GCC or clang) than GCC 4.2.1.
Summary:
* Take advantage of NEW_PCIB to remove a lot of setup code.
* Fix some bugs related to multiple PCI bridges.
There's still room for more cleanup, and still some bugs leftover, but this
cleans up a lot.
Test Plan: Tested on P5020 board with IDT PCIe switch.
Differential Revision: https://reviews.freebsd.org/D4127
created for bus_dma_tag_t tag, bounce pages should be allocated
only if needed.
Before the fix, they were allocated always if BUS_DMA_COULD_BOUNCE flag
was set but BUS_DMA_MIN_ALLOC_COMP not. As bounce pages are never freed,
it could cause memory exhaustion when a lot of such tags together with
their maps were created.
Note that there could be more maps in one tag by current design.
However BUS_DMA_MIN_ALLOC_COMP flag is tag's flag. It's set after
bounce pages are allocated. Thus, they are allocated only for first
tag's map which needs them.
Approved by: kib (mentor)
sizeof(unsigned long) < sizeof(vm_paddr_t) on Book-E, which uses 36-bit
addressing. With this, a CCSR with a physical address above 4GB successfully
maps.
Sponsored by: Alex Perez/Inertial Computing
QorIQ SoCs (e5500 core, P5 family) have 2 BARs for local access windows, while
MPC85XX, and P1/P2 families use only a single BAR register.
This also adds the QORIQ_DPAA option, mutually exclusive to MPC85XX, to handle
this difference.
Obtained from: Semihalf
Sponsored by: Alex Perez/Inertial Computing
OF_getprop() to get encode-int encoded values from the OF tree. This is
a no-op at present, since all existing PowerPC ports are big-endian, but
it is a correctness improvement and will be required if we have a
little-endian kernel at some future point.
Where it is totally impossible for the code ever to be used on a
little-endian system (much of powerpc/powermac, for instance), I have not
necessarily made the appropriate changes.
MFC after: 1 month
On the mpc85xx SoC family, writes to any part of a word in the CCSR affect the
full word. This prevents single-byte writes from taking the desired effect.
Code copied directly from ARM.
This will enable the elimination of a workaround in the USB driver that
artifically allocates buffers twice as big as they need to be (which
actually saves memory for very small buffers on the buggy platforms).
When deciding how to allocate a dma buffer, armv4, armv6, mips, and
x86/iommu all correctly check for the tag alignment <= maxsize as enabling
simple uma/malloc based allocation. Powerpc, sparc64, x86/bounce, and
arm64/bounce were all checking for alignment < maxsize; on those platforms
when alignment was equal to the max size it would fall back to page-based
allocators even for very small buffers.
This change makes all platforms use the <= check. It should be noted that
on all platforms other than arm[v6] and mips, this check is relying on
undocumented behavior in malloc(9) that if you allocate a block of a given
size it will be aligned to the next larger power-of-2 boundary. There is
nothing in the malloc(9) man page that makes that explicit promise (but the
busdma code has been relying on this behavior all along so I guess it works).
Arm and mips code uses the allocator in kern/subr_busdma_buffalloc.c, which
does explicitly implement this promise about size and alignment. Other
platforms probably should switch to the aligned allocator.
Make it clearer what each one means in the comments that define them.
IIC_BUSBSY was used in many places to mean two different things, either
"someone else has reserved the bus so you have to wait until they're done"
or "the signal level on the bus was not in the state I expected before/after
issuing some command".
Now IIC_BUSERR is used consistantly to refer to protocol/signaling errors,
and IIC_BUSBSY refers to ownership/reservation of the bus.
linkers no longer raise an error when undefined weak symbols are
found, but relocate as if the symbol value was 0. Note that we do not
repeat the mistake of userspace dynamic linker of making the symbol
lookup prefer non-weak symbol definition over the weak one, if both
are available. In fact, kernel linker uses the first definition
found, and ignores duplicates.
Signature of the elf_lookup() and elf_obj_lookup() functions changed
to split result/error code and the symbol address returned.
Otherwise, it is impossible to return zero address as the symbol
value, to MD relocation code. This explains the mechanical changes in
elf_machdep.c sources.
The powerpc64 R_PPC_JMP_SLOT handler did not checked error from the
lookup() call, the patch leaves the code as is (untested).
Reported by: glebius
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
When the system has more than a single PCI domain, the bus numbers
are not unique, thus they cannot be used for "pci" device numbering.
Change bus numbers to -1 (i.e. to-be-determined automatically)
wherever the code did not care about domains.
Reviewed by: jhb
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3406
running thread.
It is currently implemented only on amd64 and i386; on these
architectures, it is implemented by raising an NMI on the CPU on which
the target thread is currently running. Unlike stack_save_td(), it may
fail, for example if the thread is running in user mode.
This change also modifies the kern.proc.kstack sysctl to use this function,
so that stacks of running threads are shown in the output of "procstat -kk".
This is handy for debugging threads that are stuck in a busy loop.
Reviewed by: bdrewery, jhb, kib
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D3256
The only operation which is prevented by the hold is the kernel stack
swapout for the faulted thread, which should be fine to allow.
Remove useless checks for NULL curproc or curproc->p_vmspace from the
trap_pfault() wrappers on x86 and powerpc.
Reviewed by: alc (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
As part of this, clean up tlb1_init(), since bootinfo is always NULL here just
eliminate the loop altogether.
Also, fix a bug in mmu_booke_mapdev_attr() where it's possible to map a larger
immediately following a smaller page, causing the mappings to overlap. Instead,
break up the new mapping into smaller chunks. The downside to this is that it
uses more precious TLB1 entries, which, on smaller chips (e500v2) it could cause
problems with TLB1 being out of space (e500v2 only has 16 TLB1 entries).
Obtained from: Semihalf (partial)
Sponsored by: Alex Perez/Inertial Computing
FDT_DTB_STATIC is defined in opt_platform.h, and fdt_static_dtb is in
fdt_common.h, so include those files.
Sponsored by: Alex Perez/Inertial Computing
Summary:
This is (probably step 1) of enhancing the book-e pmap to support the full
36-bit physical address space on Freescale e500 and e5500 cores.
Thus far it has only been regression tested on one platform. Since I only have
one other Book-E platform (e5500), that needs work beyond this, I haven't yet
tested it on this.
Test Plan: Regression tested on my RouterBoard RB800.
Reviewed By: marcel
Differential Revision: https://reviews.freebsd.org/D3027
Summary:
The RouterBoard uses a predefined partition map which doesn't exist in the fdt.
This change allows overriding the fdt slicer with a custom slicer, and uses this
custom slicer to define the flash map on the RouterBoard RB800.
D3305 converts the mpc85xx platform into a base class, so that systems based on
the mpc85xx platform can add their own overrides. This change builds on D3305,
and creates a RouterBoard (RB800) platform to initialize the slicer override.
Reviewed By: nwhitehorn, imp
Differential Revision: https://reviews.freebsd.org/D3345
Summary:
Some systems are based around mpc85xx, but need special initialization. By
making the mpc85xx platform a base class, these systems can be platform
subclasses, and perform board-specific initialization in addition to the mpc85xx
initialization.
Test Plan:
Tested on my RB800. A platform class was created, and will be committed
separately.
Reviewed By: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D3305
* Since r257190 the kernel must actually be loaded at a 64MB boundary, not 16MB.
* Don't program HID1 register on e500mc or e5500, they don't have this SPR.
* Set proper HID0 defaults for these new architectures.
There is still more work to be done for the various SoCs, and the PMAP code
still needs to be extended to 36-bit paddr, coming soon.
Obtained from: Semihalf
Sponsored by: Alex Perez/Inertial Computing
Rather than special casing on PCIC_BRIDGE || PCIC_PROCESSOR, allow all
HDRTYPE_BRIDGE types.
Obtained from: Semihalf
Sponsored by: Alex Perez/Intertial Computing
initial thread stack is not adjusted by the tunable, the stack is
allocated too early to get access to the kernel environment. See
TD0_KSTACK_PAGES for the thread0 stack sizing on i386.
The tunable was tested on x86 only. From the visual inspection, it
seems that it might work on arm and powerpc. The arm
USPACE_SVC_STACK_TOP and powerpc USPACE macros seems to be already
incorrect for the threads with non-default kstack size. I only
changed the macros to use variable instead of constant, since I cannot
test.
On arm64, mips and sparc64, some static data structures are sized by
KSTACK_PAGES, so the tunable is disabled.
Sponsored by: The FreeBSD Foundation
MFC after: 2 week
vm_offset_t pmap_quick_enter_page(vm_page_t m)
void pmap_quick_remove_page(vm_offset_t kva)
These will create and destroy a temporary, CPU-local KVA mapping of a specified page.
Guarantees:
--Will not sleep and will not fail.
--Safe to call under a non-sleepable lock or from an ithread
Restrictions:
--Not guaranteed to be safe to call from an interrupt filter or under a spin mutex on all platforms
--Current implementation does not guarantee more than one page of mapping space across all platforms. MI code should not make nested calls to pmap_quick_enter_page.
--MI code should not perform locking while holding onto a mapping created by pmap_quick_enter_page
The idea is to use this in busdma, for bounce buffer copies as well as virtually-indexed cache maintenance on mips and arm.
NOTE: the non-i386, non-amd64 implementations of these functions still need review and testing.
Reviewed by: kib
Approved by: kib (mentor)
Differential Revision: http://reviews.freebsd.org/D3013
in lockstat.ko. This means that lockstat probes now have typed arguments and
will utilize SDT probe hot-patching support when it arrives.
Reviewed by: gnn
Differential Revision: https://reviews.freebsd.org/D2993
If KSTACK_PAGES was changed to anything alse than the default,
the value from param.h was taken instead in some places and
the value from KENRCONF in some others. This resulted in
inconsistency which caused corruption in SMP envorinment.
Ensure all places where KSTACK_PAGES are used the opt_kstack_pages.h
is included.
The file opt_kstack_pages.h could not be included in param.h
because was breaking the toolchain compilation.
Reviewed by: kib
Obtained from: Semihalf
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D3094
It appears that the linker will not handle 64-bit relocations at addresses that
are not aligned to 8-byte boundaries. Prior to this change the line:
.llong generictrap
was aligned to a 4-byte address, and the linker replaced that with an 8-byte
0x0. Aligning that address to 8 bytes caused the linker to generate the proper
relocation. As a follow-through, the dblow from trap_subr33.S used the code
sequence 'lwz %r1, TRAP_GENTRAP(0)', so this reproduces the analogue of that for
64-bit.
provide a semantic defined by the C11 fences with corresponding
memory_order.
atomic_thread_fence_acq() gives r | r, w, where r and w are read and
write accesses, and | denotes the fence itself.
atomic_thread_fence_rel() is r, w | w.
atomic_thread_fence_acq_rel() is the combination of the acquire and
release in single operation. Note that reads after the acq+rel fence
could be made visible before writes preceeding the fence.
atomic_thread_fence_seq_cst() orders all accesses before/after the
fence, and the fence itself is globally ordered against other
sequentially consistent atomic operations.
Reviewed by: alc
Discussed with: bde
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
Summary:
Both booke and AIM interrupt.c files contain nearly identical code. This merges
the two files, to reduce duplication.
Reviewers: #powerpc, marcel
Reviewed By: marcel
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D2991
On Book-E, physical addresses are actually 36-bits, not 32-bits. This is
currently worked around by ignoring the top bits. However, in some cases, the
boot loader configures CCSR to something above the 32-bit mark. This is stage 1
in updating the pmap to handle 36-bit physaddr.
This will print out the Memory Subsystem Status Register on MPC745x (G4+ class),
and the Machine Check Status Register on Book-E class CPUs, to aid in debugging
machine checks. Other relevant registers, for other CPUs, can be added in the
future.
This will require for AArch64 as we dont have modules yet.
Sponsored by: HEIF5
Sponsored by: ARM Ltd.
Differential Revision: https://reviews.freebsd.org/D1997
Thread credentials are maintained as follows: each thread has a pointer to
creds and a reference on them. The pointer is compared with proc's creds on
userspace<->kernel boundary and updated if needed.
This patch introduces a counter which can be compared instead, so that more
structures can use this scheme without adding more comparisons on the boundary.
Native ABI do not need signal conversion, only emulators may want this. Usually
emulators implements its own sv_sendsig method. For now only ibcs2 emulator does
not have own sv_sendsig implementation and depends on native sendsig() method.
So, remove any extra attempts to convert signal numbers from native sendsig()
methods except from i386 where ibsc2 is living.
years for head. However, it is continuously misused as the mpsafe argument
for callout_init(9). Deprecate the flag and clean up callout_init() calls
to make them more consistent.
Differential Revision: https://reviews.freebsd.org/D2613
Reviewed by: jhb
MFC after: 2 weeks
The replacement started at r283088 was necessarily incomplete without
replacing boolean_t with bool. This also involved cleaning some type
mismatches and ansifying old C function declarations.
Pointed out by: bde
Discussed with: bde, ian, jhb
needs to be enabled by adding "kern.racct.enable=1" to /boot/loader.conf.
Differential Revision: https://reviews.freebsd.org/D2407
Reviewed by: emaste@, wblock@
MFC after: 1 month
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Summary:
The Freescale PCIe Root Complex shows up as a Processor class device, PowerPC
subclass, so the generic PCI code ignores it for a bridge. This adds support
for it.
As part of this, update the Freescale PCI hostbridge driver, to allow probing
beyond the root complex, instead of only allowing "proper" PCI-PCI bridges.
Reviewers: #powerpc, marcel, nwhitehorn
Reviewed By: nwhitehorn
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D2442
Relnotes: yes
Much of the code was common to begin with. There is one nit, which is likely
not an issue at all. With the old code, the AIM machdep would __syncicache()
the entire kernel core at setup. However, in the unified setup, that seems to
hang on the MPC7455, perhaps because it's running later than before. Removing
this allows it to boot just fine. Examining the code, the FreeBSD loader
already does syncicache of the full kernel, and each module loaded, so this
doesn't appear to be an actual problem.
Initial code by Nathan Whitehorn.
pages which pass a NULL virtual address. If the BUS_DMA_KEEP_PG_OFFSET
flag is set, use the physical address to compute the page offset
instead. The physical address should always be valid when adding
bounce pages and should contain the same page offset like the virtual
address.
Submitted by: Svatopluk Kraus <onwahe@gmail.com>
MFC after: 1 week
Reviewed by: jhb@
This supports e500v1, e500v2, and e500mc. Tested only on e500v2, but the
performance counters are identical across all, with e500mc having some
additional events.
Relnotes: Yes
and export them to userland.
- Define __HAVE_REG32 on platforms that define a reg32 structure and check
for this in <sys/procfs.h> to control when to export prstatus32, etc.
- Add prstatus32_t and prpsinfo32_t typedefs for the 32-bit structures.
libbfd looks for these types, and having them fixes 'gcore' in gdb of a
32-bit process on a 64-bit platform.
- Use the structure definitions from <sys/procfs.h> in gcore's elf32 core
dump code instead of duplicating the definitions.
Differential Revision: https://reviews.freebsd.org/D2142
Reviewed by: kib, nathanw (powerpc bits)
MFC after: 1 week
Summary:
Book-E and AIM trap.c are almost identical, except for a few bits. This is step
1 in unifying them.
This also renumbers EXC_DEBUG, to not conflict with AIM vector numbers. Since
this is the only one thus far that is used in the switch statement in trap(),
it's the only one renumbered. If others get added to the switch, which conflict
with AIM numbers, they should also be renumbered.
Reviewers: #powerpc, marcel, nwhitehorn
Reviewed By: marcel
Subscribers: imp
Differential Revision: https://reviews.freebsd.org/D2215
A couple of internal functions used by malloc(9) and uma truncated
a size_t down to an int. This could cause any number of issues
(e.g. indefinite sleeps, memory corruption) if any kernel
subsystem tried to allocate 2GB or more through malloc. zfs would
attempt such an allocation when run on a system with 2TB or more
of RAM.
Note to self: When this is MFCed, sparc64 needs the same fix.
Differential revision: https://reviews.freebsd.org/D2106
Reviewed by: kib
Reported by: Michael Fuckner <michael@fuckner.net>
Tested by: Michael Fuckner <michael@fuckner.net>
MFC after: 2 weeks
writing approximately never (< 0.00000001% under heavy VM load, and it can
go for months without ever being acquired in normal operation). This
provides a 10% (2-minute) improvement in wall clock time for make -j32
buildworld on a 4-core 32-thread POWER8.
packets and does not schedule interrupts for any packets currently
enqueued. Close two races where enqueued packets may not ever trigger
interrupts. The first of these, at adapter initialization time, was
especially severe since a rush of enqueued packets could actually fill
the receive buffer completely, stalling the interface forever.
MFC after: 2 weeks
This is not complete yet: the gem(4) interface on my laptop seems to
disappear from the PCI bus as a result of quiescing Open Firmware in the
boot loader.
The vtophys() function is used to get the physical page address for
the virtually allocated frame buffers when a physically continuous
memory area is not available. This change also allows removing the
masking of the FB_FLAG_NOMMAP flag in the PS3 syscons driver.
The FB and VT drivers were tested using X.org/xf86-video-scfb and
syscons.
executables. The goal here, not yet accomplished, is to let the e500 kernel
run under QEMU by setting KERNBASE to something that fits in low memory and
then having the kernel relocate itself at runtime.
have the same meaning and occupy the same memory address in the trapframe
courtesy of union. Avoid some pointless #ifdef by spelling them both 'DAR'
in the trapframe.
Fix an extremely subtle concurrency bug triggered by running on 32-thread
POWER8 systems. During thread switch, there was a very small window when
the stack pointer was set to the stack pointer of the outgoing thread, but
after the lock on that thread had already been released.
If, during that window, the outgoing thread were rescheduled on another CPU
and begin execution and an exception were taken on the original CPU, the
trap handler and the outgoing thread would simultaneously execute on the same
stack, causing memory corruption. Fix this by making sure to release the
old thread only after cpu_switch() is done with its stack.
MFC after: 2 weeks
this change is to improve concurrency:
- Drop global state stored in the shadow overflow page table (and all other
global state)
- Remove all global locks
- Use per-PTE lock bits to allow parallel page insertion
- Reconstruct state when requested for evicted PTEs instead of buffering
it during overflow
This drops total wall time for make buildworld on a 32-thread POWER8 system
by a factor of two and system time by a factor of three, providing performance
20% better than similarly clocked Core i7 Xeons per-core. Performance on
smaller SMP systems, where PMAP lock contention was not as much of an issue,
is nearly unchanged.
Tested on: POWER8, POWER5+, G5 UP, G5 SMP (64-bit and 32-bit kernels)
Merged from: user/nwhitehorn/ppc64-pmap-rework
Looked over by: jhibbits, andreast
MFC after: 3 months
Relnotes: yes
Sponsored by: FreeBSD Foundation
and POWER8. This instruction set unifies the 32 64-bit scalar floating
point registers with the 32 128-bit vector registers into a single bank
of 64 128-bit registers. Kernel support mostly amounts to saving and
restoring the wider version of the floating point registers and making
sure that both scalar FP and vector registers are enabled once a VSX
instruction is executed. get_mcontext() and friends currently cannot
see the high bits, which will require a little more work.
As the system compiler (GCC 4.2) does not support VSX, making use of this
from userland requires either newer GCC or clang.
Relnotes: yes
Sponsored by: FreeBSD Foundation
Summary:
Currently, fan control is linear between the target temperature and max
temperature, which is far from ideal. This changes it to be proportional to the
distance between the current temperature and the two endpoints (target and max
temp). This also adds a hysteresis, so that fans keep going when the
temperature drops, for about 10 seconds, before slowing down.
Reviewers: nwhitehorn
Reviewed By: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D1549
MFC after: 3 weeks
Some ATI-based PowerBooks use the string 'mnca' in the backlight controller
device tree entry, so account for this and don't use nVidia when it's not an
nVidia device.
MFC after: 3 weeks
This port failed to gain traction and probably only a couple Wii consoles
ran FreeBSD all the way to single user mode with an md(4). IPC
support was never implemented, so it was impossible to use any peripheral
Any further development, if any, will happen at https://github.com/rpaulo/wii.
Discussed with: nathanw (a long time ago), jhibbits
hypervisor. This prevents an infinite loop where processes with evicted
pages would page fault forever when PMAP decided the evicted pages on
which the process was faulting was actually present and did not need to
be restored.
Found while building LLVM with make -j32.
Sponsored by: FreeBSD Foundation
POWER8 systems. During thread switch, there was a very small window when
the stack pointer was set to the stack pointer of the outgoing thread, but
after the lock on that thread had already been released.
If, during that window, the outgoing thread were rescheduled on another CPU
and begin execution and an exception were taken on the original CPU, the
trap handler and the outgoing thread would simultaneously execute on the same
stack, causing memory corruption. Fix this by making sure to release the
old thread only after cpu_switch() is done with its stack.
MFC after: 2 weeks
Sponsored by: FreeBSD Foundation
every possible trap address by default. This also makes sure the kernel
notices (and panics at) traps from newer CPUs that the kernel was not
expecting rather than executing gibberish memory.
that we (a) get the correct large page size to provide to pmap and (b)
we can alert the user if running under incorrectly-configured PowerKVM
on POWER7 and POWER8 systems.
MFC after: 1 week
const. On x86, even after the machine context is supposedly read into
the struct ucontext, lazy FPU state save code might only mark the FPU
data as hardware-owned. Later, set_fpcontext() needs to fetch the
state from hardware, modifying the *mcp.
The set_mcontext(9) is called from sigreturn(2) and setcontext(2)
implementations and old create_thread(2) interface, which throw the
*mcp out after the set_mcontext() call.
Reported by: dim
Discussed with: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
support in QEMU. Each page of a many page mapping was getting mapped to
the same physical address, which is not the desired behavior.
MFC after: 1 week
A "size" symbol with its address set to the length of handler would be
shifted forward with all other addresses when relocations are processed.
Instead, just note the end and do the subtraction at runtime.
mostly a no-op since all currently-supported instances of these CPUs give
the number of SLB slots in the device tree, but keep it here as well just
in case.
instructions to call through pointers instead. In general, these are set
implicitly through relocation processing. One has to be set explicitly in
machdep.c, however, to fit one handler in the tiny (8 instruction) space
available.
Reviewed by: andreast
Differential revision: D1554
Tested on: UP and SMP G5, Cell, POWER5+
sequences, like are used to read the HIDs. This is both easier to read
and avoids a miscompilation by GCC in certain circumstances. Also avoid
double restoration of HID4 and HID5.
MFC after: 2 weeks
in ofw_mem_regions(). This function is actually MI and should move to
dev/ofw at some point in the near future so that ARM and MIPS can use the
same code.
PVO pool size. The default errs on the exceedingly large side, so absent
any intelligent automatic tuning, at least let the user set it to save
RAM on memory-constrained systems.
MFC after: 2 weeks
This allows executing static clang built with -O0.
The value is configurable by a sysctl, so if one needs to clamp it down, they
still can.
Discussed with: nwhitehorn,emaste
code in sys/kern/kern_dump.c. Most dumpsys() implementations are nearly
identical and simply redefine a number of constants and helper subroutines;
a generic implementation will make it easier to implement features around
kernel core dumps. This change does not alter any minidump code and should
have no functional impact.
PR: 193873
Differential Revision: https://reviews.freebsd.org/D904
Submitted by: Conrad Meyer <conrad.meyer@isilon.com>
Reviewed by: jhibbits (earlier version)
Sponsored by: EMC / Isilon Storage Division
the Open Firmware, as provided by petitboot, for example. Note that this is
not quite complete, since RTAS instantiation still depends on callable
firmware.
MFC after: 2 weeks
It's redundant at the moment since it can be obtained from the trapframe
on the architectures where DTrace is supported, but this won't be the case
with ARM.
WITNESS and INVARIANTS checking, which are known to have significant
performance impact on running systems. When benchmarking new features
this kernel should be used instead of the standard GENERIC.
This kernel configuration should never appear outside of the HEAD
of the FreeBSD tree.
Summary:
Revert the initial FBT-with-KDB changes for trap_subr*.S, and instead use the
db_trap filter function to handle dtrace trap filtering. With this, the MMU is
enabled by the support code, simplifying the codepath altogether.
Test Plan: Tested on my G4 PowerBook
Reviewers: #powerpc, nwhitehorn
Reviewed By: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D1207
MFC after: 3 weeks
It is automatically set when -fPIC is passed to the compiler.
Reviewed by: dim, kib
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1179
