By default, testpmd will create membuf pool for all NUMA nodes and
ignore EAL configuration.
Count the number of available NUMA according to EAL core mask or core
list configuration. Optimized by only creating membuf pool for those
nodes.
Fixes: c9cafcc82d ("app/testpmd: fix mempool creation by socket id")
Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
Acked-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Omitting inputs and outputs mbuf creation for BaseBand Null Device
as inputs and outputs data do not exist for Null Device
Fixes: b2a4654f08 ("mempool: check for zero size creation")
Cc: stable@dpdk.org
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
These functions are buggy from the very beginning and should not be used.
Generic EAL hotplug mechanisms should be used instead.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
rte_eth_dev_attach() is to be deprecated.
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Auth IV offset was not being set when creating the crypto session.
Fixes: acf8616901 ("cryptodev: add auth IV")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Without this patch, testpmd command to config Rx offload keep_crc
would fail and report "Bad argument".
This patch also fix the command to config the Tx offload mbuf_fast_free.
Fixes: 70815c9eca ("ethdev: add new offload flag to keep CRC")
Fixes: c73a907187 ("app/testpmd: add commands to test new offload API")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
After adding RSS hash offload check, default rss_hf will fail on devices
that do not support all bits. This will lead to dcb config failure. The
patch fixes this issue by reading current valid rss_conf from the device.
Fixes: 8863a1fbfc ("ethdev: add supported hash function check")
Fixes: 1a572499be ("app/testpmd: setup DCB forwarding based on traffic class")
Cc: stable@dpdk.org
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
If the "port config all crc-strip on" command is issued,
The DEV_RX_OFFLOAD_KEEP_CRC offload flag should be cleared.
If the "port config all crc-strip off command is issued,
The DEV_RX_OFFLOAD_KEEP_CRC offload flag should be set.
Fixes: 70815c9eca ("ethdev: add new offload flag to keep CRC")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
print_err_msg uses message field that may be not initialized causing
segmentation fault.
Fixes: 12f76f5247 ("app/testpmd: add command to resume a TM node")
Signed-off-by: Krzysztof Kanas <krzysztof.kanas@caviumnetworks.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Free the buffer allocated for shared_shaper_id array in
case of configuration without shared shapers.
Fixes: 996cb153af ("app/testpmd: add commands for TM nodes and hierarchy commit")
Signed-off-by: Nithin Dabilpuram <nithin.dabilpuram@caviumnetworks.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
Use proper teardown sequence when SIGINT is caught to prevent
eventdev from going into undefined state.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch reverts the testpmd CLI prompt routine modifications done
in order to support softnic.
The reason of doing so is due to testpmd abnormal exit observed on
several setups caused by the softnic modifications to this routine,
for example: When running testpmd with tap interface
(testpmd
-n 4 --vdev=net_tap0,iface=tap0,remote=eth1 -- --burst=64
--mbcache=512 -i --nb-cores=7 --rxq=2 --txq=2 --txd=512
--rxd=512 --port-topology=chained --forward-mode=rxonly)
testpmd crashes seconds after presenting its prompt with the following
error:
testpmd> PANIC in prompt():
CLI poll error (-1)
Thread 1 "testpmd" received signal SIGABRT, Aborted.
0x00007ffff668e0d0 in raise () from /lib64/libc.so.6
(gdb) bt
#0 0x00007ffff668e0d0 in raise () from /lib64/libc.so.6
#1 0x00007ffff668f6b1 in abort () from /lib64/libc.so.6
#2 0x0000000000468027 in __rte_panic ()
#3 0x00000000004876ed in prompt ()
#4 0x000000000046dffc in main ()
When running testpmd with bare-metal device
(testpmd -n 4 --socket-mem=1024,1024 -w 04:00.0 --
--burst=64 --mbcache=512 -i --nb-cores=7
--rxq=64 --txq=4 --txd=16 --rxd=16)
and pressing CTRL+D right after testpmd prompt is presented then
the program crashes while presenting the same messages as above.
Needless to say that this behavior is not observed when using the
previous CLI prompt routine.
Fixes: 0ad778b398 ("app/testpmd: rework softnic forward mode")
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Aaron Conole <aconole@redhat.com>
There is about 3% perf drop. And it is because of a bitrate
calculation in the datapath. So improve it by maintaining an array
of port indexes in testpmd, which is updated with ethdev events.
Fixes: 8728ccf376 ("fix ethdev ports enumeration")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Due to the complex NVGRE_ENCAP flow action and based on the fact testpmd
does not allocate memory, this patch adds a new command in testpmd to
initialise a global structure containing the necessary information to
make the outer layer of the packet. This same global structure will
then be used by the flow command line in testpmd when the action
nvgre_encap will be parsed, at this point, the conversion into such
action becomes trivial.
This global structure is only used for the encap action.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Tested-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Due to the complex VXLAN_ENCAP flow action and based on the fact testpmd
does not allocate memory, this patch adds a new command in testpmd to
initialise a global structure containing the necessary information to
make the outer layer of the packet. This same global structure will
then be used by the flow command line in testpmd when the action
vxlan_encap will be parsed, at this point, the conversion into such
action becomes trivial.
This global structure is only used for the encap action.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
Tested-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
The crypto performance application was not being compiled
with -O3, which means that the performance shown may not be
optimal.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Using a small number of sessions results in rte_mempool_create call
with cache_size > n, which fails. There is no need to cache the elements,
as there is no performance impact.
Fixes: 501c0a3b14 ("app/crypto-perf: limit number of sessions")
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
udp_cksum is duplicated, second one should be tcp_cksum
Fixes: c73a907187 ("app/testpmd: add commands to test new offload API")
Cc: stable@dpdk.org
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
If "--disable-crc-strip" testpmd parameter issued, it removes the
DEV_RX_OFFLOAD_CRC_STRIP flag.
With introduction of new DEV_RX_OFFLOAD_KEEP_CRC offload flag, this
flag also should be set when this parameter issued.
Fixes: 70815c9eca ("ethdev: add new offload flag to keep CRC")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Current topology distribute forwarding streams to lcores by port, this
make unbalanced loading when port number larger than 2:
lcore 0: P0Q0->P1Q0, P0Q1->P1Q1
locre 1: P1Q0->P0Q0, P1Q1->P0Q1
If only one port has traffic, only one locre get fully loaded and the
other one get no forwarding. Performance is bad as only one core doing
forwarding in such case.
This patch distributes forwarding streams by queue, try to get streams
of each port handled by different lcore:
lcore 0: P0Q0->P1Q0, P1Q0->P1Q0
locre 1: P0Q1->P0Q1, P1Q1->P0Q1
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Modied the testpmd softnic forwarding mode as per the
changes in softnic PMD.
To run testpmd application with softnic fwd mode, following
command is used;
$ ./testpmd -c 0xc -n 4 --vdev 'net_softnic0,firmware=script.cli'
-- -i --forward-mode=softnic
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Extend struct rte_bpf_xsym with new fields to provide information about:
- for variables - type and size
- for functions - number of arguments and type/size of each argument
and return value
Such information would allow validate code to perform
more extensive checking on input BPF program and catch
misbehaving BPF code.
That change would cause ABI/API breakage for librte_bpf.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
This patch enables GSO for UDP/IPv4 packets. Oversized UDP/IPv4
packets transmitted over a GSO-enabled port will undergo segmentation.
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Tested-by: Yuwei Zhang <yuwei1.zhang@intel.com>
Crypto dev would specify its headroom and tailroom requirement and the
application is expected to honour this while creating buffers.
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Currently, the info structure contains the maximum number
of sessions that a device can manage.
This field was useful when the session mempool was created inside
each device, but now it is created at the application level.
Most PMDs do not have a limitation on the sessions managed,
but a few do, therefore this field must remain in the structure.
However, a new value, 0, can be used to indicate that
a device does not have an actual maximum of sessions.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Instead of creating a fixed number of sessions,
calculate the necessary number based on number of devices
and queue pairs used.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
ethdev layer introduced checks for application requested RSS hash
functions and returns error for ones unsupported by hardware
This check breaks some sample applications which blindly configures
RSS hash functions without checking underlying hardware support.
Updated examples to mask out unsupported RSS has functions during device
configuration.
Prints a log if configuration values updated by this check.
Fixes: aa1a6d87f1 ("ethdev: force RSS offload rules again")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Meijuan Zhao <meijuanx.zhao@intel.com>
Tested-by: Yingya Han <yingyax.han@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
In DPDK 17.11, the ethdev offloads API has changed:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
The new API is documented in the programmer's guide:
http://doc.dpdk.org/guides/prog_guide/poll_mode_drv.html#hardware-offload
For reminder, the main concepts in the new API were:
- All offloads are disabled by default
- Distinction between per port and per queue offloads.
The transition bits are now removed:
- Translation of the old API in ethdev
- rte_eth_conf.rxmode.ignore_offload_bitfield
- ETH_TXQ_FLAGS_IGNORE
The old API bits are now removed:
- Rx per-port rte_eth_conf.rxmode.[bit-fields]
- Tx per-queue rte_eth_txconf.txq_flags
- ETH_TXQ_FLAGS_NO*
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
Some test applications and examples were not converted
to the new offload API introduced in 17.11.
For reference, see "Hardware Offload" in
doc/guides/prog_guide/poll_mode_drv.rst
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
COUNT action has been modified and has several fields not addressable
though testpmd. In addition, as those fields are not definable testpmd
is providing an empty configuration which is undefined.
Fixes: fb8fd96d42 ("ethdev: add shared counter to flow API")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
The vlan tci mask should be set to 0xEFFF, not 0x0,
the wrong mask will cause mask error for register set.
Fixes: d9d5e6f2f0 ("app/testpmd: set default flow director mask")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Below commit checks global device information to determine if a port uses
the softnic driver once initialized. Problem is that this information is
not available at this point when a port is initialized interactively
through a "port attach XXX" command, crashing testpmd.
This patch systematically initializes global device information to address
this issue.
Fixes: 5b590fbe09 ("app/testpmd: add traffic management forwarding mode")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Wrong index used to select descriptor number, causing setting up queue
with wrong number of descriptors.
Fixes: d44f8a485f ("app/testpmd: enable per queue configure")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Application can provide 0 for ring size to use default values. To not
log zero for that case get configured ring size from device.
Call the rte_eth_rxq_info_get() and rte_eth_txq_info_get() functions
to update the number of rx and tx descriptors.
Fixes: d44f8a485f ("app/testpmd: enable per queue configure")
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
While previous fix with the same title does address the main issue, root
cause is that proper handling of spec/last/mask was overlooked in the
original patch.
Mask and last fields must be taken into account at all times.
Fixes: d0ad8648b1 ("app/testpmd: fix RSS flow action configuration")
Fixes: 67af7ecc52 ("app/testpmd: fix copy of raw flow item")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
For vdev, just calling rte_eth_dev_close() isn't enough to free all
the resources allocated during device probe, e.g. for virtio-user,
virtio_user_pmd_remove(), i.e. the remove() method of a vdev driver,
needs to be called to unlink the socket file created during device
probe. So this patch calls the rte_eth_dev_detach() for vdev when
quitting testpmd.
vdevs detach on testpmd exit implemented as workaround to fix
a virtio-user issue. The issue was virtio-user cleanup is not
called and existing socket file not cleaned up which will fail
next run.
Added a comment that this workaround should be converted to a proper
cleanup, not something specific to virtio-user, and not something
specific to vdev and testpmd.
Fixes: af75078fec ("first public release")
Fixes: bd8f50a45d ("net/virtio-user: support server mode")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Tested-by: Lei Yao <lei.a.yao@intel.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
rte_cryptodev_get_header_session_size() and
rte_cryptodev_get_private_session_size() functions are
targeting symmetric sessions.
With the future addition of asymmetric operations,
these functions need to be renamed from *cryptodev_*_session_*
to *cryptodev_sym_*_session_* to be symmetric specific.
The two original functions are marked as deprecated
and will be removed in 18.08, so applications can still
use the functions in 18.05.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Shally Verma <shally.verma@caviumnetworks.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
inlined from ‘cperf_test_vector_get_from_file’ at
app/test-crypto-perf/cperf_test_vector_parsing.c:578:11:
app/test-crypto-perf/cperf_test_vector_parsing.c:510:3: error:
‘strncpy’ output truncated before terminating nul copying as many bytes
from a string as its length [-Werror=stringop-truncation]
strncpy(entry, line, strlen(line));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
app/test-crypto-perf/cperf_test_vector_parsing.c:528:5: error:
‘strncat’ output truncated before terminating nul copying as many bytes
from a string as its length [-Werror=stringop-truncation]
strncat(entry, line, strlen(line));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Found this issue with meson build and gcc 8.1.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Fixing CHECKED_RETURN issue by checking values returned
by rte_bbdev_dec_op_alloc_bulk and rte_bbdev_enc_op_alloc_bulk
functions.
Coverity issue: 279447, 279456
Fixes: f714a18885 ("app/testbbdev: add test application for bbdev")
Cc: stable@dpdk.org
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
When RTE_TEST_PMD_RECORD_BURST_STATS is enabled, testpmd collects
burst statistics and includes them in the port stats report. The
summary should include top 2 most frequent burst sizes, but there is a
bug in finding the top-2. During the scan of burst size counts, the
top-2 can change only if top-1 also changes.
Added logic to update the top-2 if current burst size is larger than
existing top-2, but smaller than existing top-1.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Daniel Shelepov <dashel@microsoft.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
app/test-bbdev/test_bbdev_vector.c:895:3:
error: ‘strncpy’ output truncated before terminating nul copying as
many bytes from a string as its length [-Werror=stringop-truncation]
strncpy(entry, line, strlen(line));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
app/test-bbdev/test_bbdev_vector.c:917:5:
error: ‘strncat’ output truncated before terminating nul copying as
many bytes from a string as its length [-Werror=stringop-truncation]
strncat(entry, line, strlen(line));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: f714a18885 ("app/testbbdev: add test application for bbdev")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
app/proc-info/main.c: In function ‘nic_xstats_display’:
app/proc-info/main.c:495:45: error:
‘%s’ directive writing up to 255 bytes into a regioni of size between 165 and 232
[-Werror=format-overflow=]
sprintf(buf, "PUTVAL %s/dpdkstat-port.%u/%s-%s N:%"
^~
PRIu64"\n", host_id, port_id, counter_type,
~~~~~~~~~~~~
app/proc-info/main.c:495:4: note:
‘sprintf’ output between 31 and 435 bytes into a destination of size 256
sprintf(buf, "PUTVAL %s/dpdkstat-port.%u/%s-%s N:%"
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
PRIu64"\n", host_id, port_id, counter_type,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
xstats_names[i].name, values[i]);
Fixes: 2deb6b5246 ("app/procinfo: add collectd format and host id")
Cc: stable@dpdk.org
Signed-off-by: Andy Green <andy@warmcat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Testpmd set CRC_STRIP offload blindly, this is wrong according offload
API definition, and will cause error for the PMDs that doesn't support
CRC_STRIP like virtual PMDs.
Check if underlying device report this capability and don't set it if
not supported.
Fixes: 0074d02fca ("app/testpmd: convert to new Rx offloads API")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
Add following testpmd run-time commands to support test of
new Rx offload API:
show port <port_id> rx_offload capabilities
show port <port_id> rx_offload configuration
port config <port_id> rx_offload <offload> on|off
port <port_id> rxq <queue_id> rx_offload <offload> on|off
Above last 2 commands should be run when the port is stopped.
And <offload> can be one of "vlan_strip", "ipv4_cksum", ...
Add following testpmd run-time commands to support test of
new Tx offload API:
show port <port_id> tx_offload capabilities
show port <port_id> tx_offload configuration
port config <port_id> tx_offload <offload> on|off
port <port_id> txq <queue_id> tx_offload <offload> on|off
Above last 2 commands should be run when the port is stopped.
And <offload> can be one of "vlan_insert", "udp_cksum", ...
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Setup number of Rx & Tx queues to 0 at rte_eth_dev_configure means
take driver's default queue number, so if during a re-configuration
previous queue number will be overwrite, this is not expected when
we configure dcb. The patch fix it by re-configure device with the
original queue number.
Fixes: 3be82f5cc5 ("ethdev: support PMD-tuned Tx/Rx parameters")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
The default RSS hash key automatically provided by testpmd for RSS actions
specified without one is so weak that traffic can't spread properly on L4
with it (as seen with TCPv6).
It is only 30 bytes long, zero-padded to RSS_HASH_KEY_LENGTH (64 bytes),
later truncated to 40 bytes for most PMDs. The presence of padding is
really what kills balancing.
This patch provides a full 64-byte (non-zero-terminated) string to address
this issue.
Fixes: d0ad8648b1 ("app/testpmd: fix RSS flow action configuration")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since the commit referenced below, specifying a RSS action without any
queues (e.g. "actions rss queues end / end") does not override the default
set automatically generated by testpmd.
In short, one cannot instantiate a RSS action with 0 target queues anymore
in order to determine how PMDs react (hint: this is currently undocumented
so they may reject it, however ideally they should interpret it as a
default setting like for other fields where empty values stand for
"defaults".)
Fixes: d0ad8648b1 ("app/testpmd: fix RSS flow action configuration")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Patch adding configurable locking has reshuffled some init stages, but
did not put them back in correct order. Fix order of init by moving
everything that was before arguments parsing into correct places.
Fixes: e505d84c64 ("app/testpmd: make locking memory configurable")
Reported-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The second parameter "name" in the function rte_eth_dev_detach
has been already redefined as "char *name __rte_unused",
"port_id" is printed instead of "name" in testpmd.
Fixes: b65ecf1993 ("devargs: rename legacy API")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Matan Azrad <matan@mellanox.com>
When a removable device is plugged-out, a RMV interrupt is invoked and
the application can catch the event in order to stop the device
management.
The Testpmd wrong behavior in this case is to detach the removed device
using the EAL detach API.
The EAL API does not invalidate the ethdev port and the port keeps
appearing as valid from the ethdev point of view.
Thus, the next operations for the ethtev port X may trigger an invalid
rte_device access. For example, calling "show port info X" may cause
segfault.
Moreover, the removed port is not removed from the Testpmd data-path
structures. Therefore, the invalid device may still be used by the
Testpmd data-path.
Call the Testpmd detach_port() function which uses the ethdev detach
API, and prepare the Testpmd forward ports database for a new
forwarding session without the detached port.
Fixes: 284c908cc5 ("app/testpmd: request device removal interrupt")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
In the RMV device event callback, there is a call for the removed
device stop operation which triggers a link status operation for the
removed device.
It may casue an error from the removed device PMD.
Skip the link status operation in the above described case.
Fixes: 284c908cc5 ("app/testpmd: request device removal interrupt")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
When the user uses the synchronic hot-plug commands, attach\detach, in
order to insert\remove a port from the system, the forward ports list
update is missed in the current implementation.
Thus, an invalid port may be used for data-path in case of detach
because the detached port was not removed from the forward port list.
In addition, a new port is not used for data-path in case of attach, as the
default behavior of Testpmd, because the attached port was not inserted
to the forward port list.
Update the forward port list in the above cases to allow the correct
port usage for data-path in the next packet forwarding start.
Fixes: edab33b1c0 ("app/testpmd: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
A port Rx queue flush is done when the packet forwarding starts in
order to clean the port statistics for a new traffic session.
The flush operation is wrongly called before the update of the new
forward ports, and may fail due to flush operation for an invalid port
configured by the old session.
Move the new forward port setup to be done before the Rx queue flush.
Fixes: 7741e4cf16 ("app/testpmd: VMDq and DCB updates")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
When the forward ports are changed either by new portlist\portmask
configurations or by a port detachment, all the old forward streams
are freed and new streams are allocated to be aligned with the new
forward ports.
If the number of the forward ports drops to 0, there is an attempt
to wrongly allocate 0 memory for the streams.
Skip the streams memory allocation if no forward ports are configured.
Fixes: ce8d561418 ("app/testpmd: add port configuration settings")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
There are several cases of an invalid port data access that causes the
printing of all the valid ports, for example, when the user asks to
receive a port information of an invalid port.
Wrongly, the port with id 0 is printed in all the above described
cases, regardless of its validity.
Print port 0 only if it is valid as done for the rest of the ports.
Fixes: af75078fec ("first public release")
Fixes: b6ea6408fb ("ethdev: store numa_node per device")
Fixes: edab33b1c0 ("app/testpmd: support port hotplug")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Testpmd allows to create and control bonding devices by run time
command lines using the bonding PMD API.
Some bonding device slaves operations (close, stop, etc) should not be
used by the application and must be managed by the bonding PMD.
Thus, Testpmd manages slave flags to prevent the special operations
calls and when a slave is added to bonding device by a run time command
line, the flag is set.
There is one more way to define the slaves for a bonding device using
EAL command line and Testpmd doesn't set the slave flag in this case
what causes to the special operations to be called by Testpmd.
Add one more check to detect bonding slave device.
Fixes: 41b05095c4 ("app/testpmd: fix bonding start")
Fixes: 0e545d3047 ("app/testpmd: check stopping port is not in bonding")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Bernard Iremonger <bernard.iremonger@intel.com>
If mlockall() is called while allocated VA space is bigger than
amount of available RAM, FreeBSD kernel will deadlock and need
a hard reboot. We do allocate big amounts of memory because of
how new memory subsystem works, so calling mlockall() will cause
a deadlock. So, disable mlockall() by default on FreeBSD.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add two new command-line parameters for either enabling or
disabling locking all memory at app startup.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Change baseband device name:
- from turbo_sw to baseband_turbo_sw
- from bbdev_null to baseband_null
To keep backwards compatibility the old names are still valid
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Improve readability of test application by replacing
int values with rte_bbdev_event_type enum.
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Creation of new vectors to test and validate BBDevice capabilities
Test app documentation updated accordingly
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Update test vectors directory for Wireless Baseband Device:
- update test vectors names
- python script used for tests execution updated
Update the test app documentation:
- vector test names updated
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Splitting Queue Groups into UL/DL Groups in Turbo Software
Driver. They are independent for Decode/Encode.
Release note updated accordingly.
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
New test created to measure offload cost.
Changes were introduced in API, turbo software driver
and test application
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Support for optional CRC overlap in decode processing implemented
in Turbo Software driver
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
Update Turbo Software driver for Wireless Baseband Device:
- function scaling input LLR values to specific range [-16, 16] added
- new test vectors to check device capabilities added
- release note updated accordingly
Signed-off-by: Kamil Chalupnik <kamilx.chalupnik@intel.com>
Acked-by: Amr Mokhtar <amr.mokhtar@intel.com>
The crypto performance application requires at least
two cores: one master core that launches the other slaves
and one core acting as slave running the crypto device.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Traffic manager provides an API for resuming
an arbitrary node in a hierarchy.
This commit adds support for calling this API
from testpmd.
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>
Traffic manager provides an API for suspending
an arbitrary node in a hierarchy.
This commit adds support for calling this API from testpmd.
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>
When calculate memory size of an RTE_FLOW_ITEM_TYPE_RAW 's mask
mask->length is not the real size of binary pattern, it should take
spec->length, or memory size will be over counted (0xffff) and invalid
memory be access during following memcpy.
Fixes: d0ad8648b1 ("app/testpmd: fix RSS flow action configuration")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
This patch is to accommodate an experimental feature of mbuf - external
buffer attachment. If mbuf is attached to an external buffer, its ol_flags
will have EXT_ATTACHED_MBUF set. Without enabling/using the feature,
everything remains same.
If PMD delivers Rx packets with non-direct mbuf, ol_flags should not be
overwritten. For mlx5 PMD, if Multi-Packet RQ is enabled, Rx packets could
be carried with externally attached mbufs.
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add rte_flow_action_count action data structure to enable shared
counters across multiple flows on a single port or across multiple
flows on multiple ports within the same switch domain. Also this enables
multiple count actions to be specified in a single flow action.
This patch also modifies the existing rte_flow_query API to take the
rte_flow_action structure as an input parameter instead of the
rte_flow_action_type enumeration to allow querying a specific action
from a flow rule when multiple actions of the same type are specified.
This patch also contains updates for the bonding, failsafe and mlx5 PMDs
and testpmd application which are affected by this API change.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Introduces a new action type RTE_FLOW_ITEM_TYPE_MARK which enables
flow patterns to specify arbitrary integer values to match aginst
set by the RTE_FLOW_ACTION_TYPE_MARK action in previously matched
flows.
Add support for specification of new MARK flow item in testpmd's cli.
Update testpmd documentation to describe new MARK flow item support.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Add jump action type which defines an action which allows a matched
flow to be redirect to the specified group. This allows physical and
logical flow table/group hierarchies to be defined through rte_flow.
This breaks ABI compatibility for the following public functions (as it
modifes the ordering of the rte_flow_action_type enumeration):
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Add support for specification of new JUMP action to testpmd's flow
cli, and update the testpmd documentation to describe this new
action.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Add the port name to information printed by show port info <port_id>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Introduces a new port attribute to ethdev port's which denotes the
switch domain a port belongs to. By default all port's switch
identifiers are set to RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID. Ports
which supported the concept of switch domains can be configured with
the same switch domain id.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
After add RSS hash offload check, default rss_hf will fail on
devices that not support all bits, the patch take rss_hf as
a suggest value and only set bits that device supported base on
rte_eth_dev_get_info, also rss_hf will only be updated when new
rss offload is successfully updated on all ports by
"port config all rss [!default]" command.
Fixes: 8863a1fbfc ("ethdev: add supported hash function check")
Fixes: d9aa619c60 ("app/testpmd: new parameter for port config all RSS command")
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add support for the following OpenFlow-defined actions:
- RTE_FLOW_ACTION_OF_POP_VLAN: pop the outer VLAN tag.
- RTE_FLOW_ACTION_OF_PUSH_VLAN: push a new VLAN tag.
- RTE_FLOW_ACTION_OF_SET_VLAN_VID: set the 802.1q VLAN id.
- RTE_FLOW_ACTION_OF_SET_VLAN_PCP: set the 802.1q priority.
- RTE_FLOW_ACTION_OF_POP_MPLS: pop the outer MPLS tag.
- RTE_FLOW_ACTION_OF_PUSH_MPLS: push a new MPLS tag.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch adds GRE checksum and sequence extension supports in addtion
to key extension to csum forwarding engine.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Add VXLAN-GPE support to csum forwarding engine and rte flow.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
RTE_FLOW_ACTION_TYPE_PORT_ID brings the ability to inject matching traffic
into a different device, as identified by its DPDK port ID.
This is normally only supported when the target port ID has some kind of
relationship with the port ID the flow rule is created against, such as
being exposed by a common physical device (e.g. a different port of an
Ethernet switch).
The converse pattern item, RTE_FLOW_ITEM_TYPE_PORT_ID, makes the resulting
flow rule match traffic whose origin is the specified port ID. Note that
specifying a port ID that differs from the one the flow rule is created
against is normally meaningless (if even accepted), but can make sense if
combined with the transfer attribute.
These must not be confused with their PHY_PORT counterparts, which refer to
physical ports using device-specific indices, but unlike PORT_ID are not
necessarily tied to DPDK port IDs.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch adds the missing action counterpart to the PHY_PORT pattern
item, that is, the ability to directly inject matching traffic into a
physical port of the underlying device.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Mohammad Abdul Awal <mohammad.abdul.awal@intel.com>
While RTE_FLOW_ITEM_TYPE_PORT refers to physical ports of the underlying
device using specific identifiers, these are often confused with DPDK port
IDs exposed to applications in the global name space.
Since this pattern item is seldom used, rename it RTE_FLOW_ITEM_PHY_PORT
for better clarity.
No ABI impact.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Contrary to all other pattern items, these are inconsistently documented as
affecting traffic instead of simply matching its origin, without provision
for the latter.
This commit clarifies documentation and updates PMDs since the original
behavior now has to be explicitly requested using the new transfer
attribute.
It breaks ABI compatibility for the following public functions:
- rte_flow_create()
- rte_flow_validate()
Impacted PMDs are bnxt and i40e, for which the VF pattern item is now only
supported when a transfer attribute is also present.
Fixes: b1a4b4cbc0 ("ethdev: introduce generic flow API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This new attribute enables applications to create flow rules that do not
simply match traffic whose origin is specified in the pattern (e.g. some
non-default physical port or VF), but actively affect it by applying the
flow rule at the lowest possible level in the underlying device.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
TPID handling in rte_flow VLAN and E_TAG pattern item definitions is not
consistent with the normal stacking order of pattern items, which is
confusing to applications.
Problem is that when followed by one of these layers, the EtherType field
of the preceding layer keeps its "inner" definition, and the "outer" TPID
is provided by the subsequent layer, the reverse of how a packet looks like
on the wire:
Wire: [ ETH TPID = A | VLAN EtherType = B | B DATA ]
rte_flow: [ ETH EtherType = B | VLAN TPID = A | B DATA ]
Worse, when QinQ is involved, the stacking order of VLAN layers is
unspecified. It is unclear whether it should be reversed (innermost to
outermost) as well given TPID applies to the previous layer:
Wire: [ ETH TPID = A | VLAN TPID = B | VLAN EtherType = C | C DATA ]
rte_flow 1: [ ETH EtherType = C | VLAN TPID = B | VLAN TPID = A | C DATA ]
rte_flow 2: [ ETH EtherType = C | VLAN TPID = A | VLAN TPID = B | C DATA ]
While specifying EtherType/TPID is hopefully rarely necessary, the stacking
order in case of QinQ and the lack of documentation remain an issue.
This patch replaces TPID in the VLAN pattern item with an inner
EtherType/TPID as is usually done everywhere else (e.g. struct vlan_hdr),
clarifies documentation and updates all relevant code.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Summary of changes for PMDs that implement ETH, VLAN or E_TAG pattern
items:
- bnxt: EtherType matching is supported with and without VLAN, but TPID
matching is not and triggers an error.
- e1000: EtherType matching is only supported with the ETHERTYPE filter,
which does not support VLAN matching, therefore no impact.
- enic: same as bnxt.
- i40e: same as bnxt with existing FDIR limitations on allowed EtherType
values. The remaining filter types (VXLAN, NVGRE, QINQ) do not support
EtherType matching.
- ixgbe: same as e1000, with additional minor change to rely on the new
E-Tag macro definition.
- mlx4: EtherType/TPID matching is not supported, no impact.
- mlx5: same as bnxt.
- mvpp2: same as bnxt.
- sfc: same as bnxt.
- tap: same as bnxt.
Fixes: b1a4b4cbc0 ("ethdev: introduce generic flow API")
Fixes: 99e7003831 ("net/ixgbe: parse L2 tunnel filter")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
RSS hash types (ETH_RSS_* macros defined in rte_ethdev.h) describe the
protocol header fields of a packet that must be taken into account while
computing RSS.
When facing encapsulated (e.g. tunneled) packets, there is an ambiguity as
to whether these should apply to inner or outer packets. Applications need
the ability to tell exactly "where" RSS must be performed.
This is addressed by adding encapsulation level information to the RSS flow
action. Its default value is 0 and stands for the usual unspecified
behavior. Other values provide a specific encapsulation level.
Contrary to the change announced by commit 676b605182 ("doc: announce
ethdev API change for RSS configuration"), this patch does not affect
struct rte_eth_rss_conf but struct rte_flow_action_rss as the former is not
used anymore by the RSS flow action. ABI impact is therefore limited to
rte_flow.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
By definition, RSS involves some kind of hash algorithm, usually Toeplitz.
Until now it could not be modified on a flow rule basis and PMDs had to
always assume RTE_ETH_HASH_FUNCTION_DEFAULT, which remains the default
behavior when unspecified (0).
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Since its inception, the rte_flow RSS action has been relying in part on
external struct rte_eth_rss_conf for compatibility with the legacy RSS API.
This structure lacks parameters such as the hash algorithm to use, and more
recently, a method to tell which layer RSS should be performed on [1].
Given struct rte_eth_rss_conf will never be flexible enough to represent a
complete RSS configuration (e.g. RETA table), this patch supersedes it by
extending the rte_flow RSS action directly.
A subsequent patch will add a field to use a non-default RSS hash
algorithm. To that end, a field named "types" replaces the field formerly
known as "rss_hf" and standing for "RSS hash functions" as it was
confusing. Actual RSS hash function types are defined by enum
rte_eth_hash_function.
This patch updates all PMDs and example applications accordingly.
It breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
[1] commit 676b605182 ("doc: announce ethdev API change for RSS
configuration")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This patch replaces C99-style flexible arrays in struct rte_flow_action_rss
and struct rte_flow_item_raw with standard pointers to the same data.
They proved difficult to use in the field (e.g. no possibility of static
initialization) and unsuitable for C++ applications.
Affected PMDs and examples are updated accordingly.
This breaks ABI compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Fixes: b1a4b4cbc0 ("ethdev: introduce generic flow API")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Upcoming changes in relation to the handling of actions list will make the
DUP action redundant as specifying several QUEUE actions will achieve the
same behavior. Besides, no PMD implements this action.
By removing an entry from enum rte_flow_action_type, this patch breaks ABI
compatibility for the following public functions:
- rte_flow_copy()
- rte_flow_create()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
These enable more precise reporting of objects responsible for errors.
This breaks ABI compatibility for the following public functions:
- rte_flow_create()
- rte_flow_destroy()
- rte_flow_error_set()
- rte_flow_flush()
- rte_flow_isolate()
- rte_flow_query()
- rte_flow_validate()
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
This change adds a new option to "port config" command to
add udp tunnel port for VXLAN and GENEVE tunneling protocols.
This command can be extended for other tunneling protocols
listed in "enum rte_eth_tunnel_type" as and when needed.
usage:
port config <port_id> udp_tunnel_port add|rm vxlan|geneve <udp_port>
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add command to change specific queue's ring size configure,
the new value will only take effect after command that restart
the device(port stop <port_id>/port start <port_id>) or command
that setup the queue(port <port_id> rxq <qid> setup) at runtime.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Each queue has independent configure information in rte_port.
Base on this, we are able to add new commands to configure
different queues with different value.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add new command to setup queue, rte_eth_[rx|tx]_queue_setup will
be called corresponsively.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Correct couple port id from uint8_t to uint16_t.
Fixes: f8244c6399 ("ethdev: increase port id range")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This patches add "default" parameter to "port config all rss" command.
"default" means all supported hash types reported by device info.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Original implementation lacks the on/off toggle.
This patch shows up as a fix because it has been a popular request ever
since the first DPDK release with the original implementation but was never
addressed.
Fixes: abc3d81aca ("app/testpmd: add item raw to flow command")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Users cannot override the default RSS settings when entering a RSS action,
only a list of queues can be provided.
This patch enables them to set a RSS hash key and types for a flow rule.
Fixes: 05d34c6e9d ("app/testpmd: add queue actions to flow command")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Except for a list of queues, RSS configuration (hash key and fields) cannot
be specified from the flow command line and testpmd does not provide safe
defaults either.
In order to validate their implementation with testpmd, PMDs had to
interpret its NULL RSS configuration parameters somehow, however this has
never been valid to begin with.
This patch makes testpmd always provide default values.
The list of RSS types to use is exclusively taken from the global "rss_hf"
variable, itself configured through the "port config all rss" command or
--rss-ip/--rss-udp command-line options.
Fixes: 05d34c6e9d ("app/testpmd: add queue actions to flow command")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Configuration structure is not optional with flow rule actions that expect
one; this pointer is not supposed to be NULL and PMDs should not have to
verify it.
Like pattern item spec/last/mask fields, it is currently set when at least
one configuration parameter is provided on the command line. This patch
sets it as soon as an action is created instead.
Fixes: 7a91969ad3 ("app/testpmd: add various actions to flow command")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The lack of a working completion for RSS queues was overlooked during
development; until now only "end" was displayed as a valid token.
Fixes: 05d34c6e9d ("app/testpmd: add queue actions to flow command")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
The options --server-socket-path and --client-socket-path
were said to be deprecated and will be removed soon.
No need to wait for removing application options which have
no effect, and can confuse the user.
Fixes: 660098d61f ("pdump: use generic multi-process channel")
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
The previous symbols were deprecated for two releases.
They are now marked as such and cannot be used anymore.
They are replaced by ones respecting the new namespace that are marked
experimental.
As a result, eth_dev attach and detach are slightly reworked to follow
the changes.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Private shaper profiles are attached to nodes defined
in traffic manager hierarchy.
Since not every node must have a configured shaper
testpmd should allow setting shaper profile id to
invalid (RTE_TM_SHAPER_PROFILE_ID_NONE) easily.
This patch follows same approach as in case of setting
parent id of the root node i.e passing a negative value
sets node id to RTE_TM_NODE_ID_NULL.
In case of private shaper profile negative value will set
shaper profile id to RTE_TM_SHAPER_PROFILE_ID_NONE.
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Reviewed-by: Jasvinder Singh <jasvinder.singh@intel.com>
The current code usages the default mempool ops while
creating the mempool for crypto usages. Adding the support
for best_mempool_ops to enable it for devices using
non default mempools.
Signed-off-by: Ashish Jain <ashish.jain@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
If number of available devices are more than logical core,
there is no need to throw an error.
Just use the less number of devices instead.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
In case of application build with shared library mode unless
option '-d' is passed, poll mode driver for devices is not
initialized. Notifying the user just after rte_eal_init is
pro active way of intimating the user.
Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Which per port offloads are enabled is not clear. Printing offloads
values at forwarding start.
CRC strip offload value was printed in more verbose manner, it is
removed since Rx/Tx offload values covers it and printing only CRC one
can cause confusion.
Hexadecimal offloads values are not very user friendly but preferred to
not create to much noise during forwarding start.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Unused variables will appear when setting RTE_LIBRTE_I40E_PMD
to be disabled.
The fix was to move these variables to the I40E_PMD scope,
since only I40E_PMD is using it.
Fixes: a9dbe18022 ("fix ethdev port id validation")
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
The original code replies on the private channel for primary and
secondary communication. Change to use the generic multi-process
channel.
Note with this change, dpdk-pdump will be not compatible with
old version DPDK applications.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
In order to fix this common mistake in all external applications,
the function rte_eth_dev_count is deprecated, while introducing
the new functions rte_eth_dev_count_avail and rte_eth_dev_count_total.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application assume a valid port index is in the range [0..count[.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be valid
- old ports being detached (RTE_ETH_DEV_UNUSED) can be valid
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the function rte_eth_dev_is_valid_port.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Some DPDK applications wrongly assume these requirements:
- no hotplug, i.e. ports are never detached
- all allocated ports are available to the application
Such application iterates over ports by its own mean.
The most common pattern is to request the port count and
assume ports with index in the range [0..count[ can be used.
There are three consequences when using such wrong design:
- new ports having an index higher than the port count won't be seen
- old ports being detached (RTE_ETH_DEV_UNUSED) can be seen as ghosts
- failsafe sub-devices (RTE_ETH_DEV_DEFERRED) will be seen by the application
Such mistake will be less common with growing hotplug awareness.
All applications and examples inside this repository - except testpmd -
must be fixed to use the iterator RTE_ETH_FOREACH_DEV.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The options names in code and doc are not the same.
Fixes: 98c6292105 ("app/eventdev: add options for event timer adapter")
Suggested-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
test_perf_common.c: In function ‘perf_event_timer_producer’:
test_perf_common.c:99:3: error: missing initializer for
field ‘priority’ of ‘struct <anonymous>’
[-Werror=missing-field-initializers]
.ev.sched_type = t->opt->sched_type_list[0],
Fixes: d008f20bce ("app/eventdev: add event timer adapter as a producer")
Reported-by: Andrew Rybchenko <arybchenko@solarflare.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Tested-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add options to configure expiry timeout, max number of timers and number
of event timer adapters through command line parameters.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add burst mode for event timer adapter that can be selected by passing
--prod_type_timerdev_burst.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add event timer adapter as producer option that can be selected by
passing --prod_type_timerdev.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Erik Gabriel Carrillo <erik.g.carrillo@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The optimal values of several transmission & reception related
parameters, such as burst sizes, descriptor ring sizes, and number
of queues, varies between different network interface devices. This
patch allows testpmd to make use of per-PMD tuned parameter values.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Public struct rte_eth_dev_info has a "struct rte_pci_device" field in it
although it is common for all ethdev in all buses.
Replacing pci specific struct with generic device struct and updating
places that are using pci device in a way to get this information from
generic device.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: David Marchand <david.marchand@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Use testpmd for example, to show how an application uses device event
APIs to monitor the hotplug events, including both hot removal event
and hot insertion event.
The process is that, testpmd first enable hotplug by below commands,
E.g. ./build/app/testpmd -c 0x3 --n 4 -- -i --hot-plug
then testpmd starts the device event monitor by calling the new API
(rte_dev_event_monitor_start) and register the user's callback by call
the API (rte_dev_event_callback_register), when device being hotplug
insertion or hotplug removal, the device event monitor detects the event
and call user's callbacks, user could process the event in the callback
accordingly.
This patch only shows the event monitoring, device attach/detach would
not be involved here, will add from other hotplug patch set.
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Reviewed-by: Jianfeng Tan <jianfeng.tan@intel.com>
IOVA addresses should be found by calling rte_virt2iova() as
opposed to rte_virt2phy(), as physical address may not be
equal to IOVA address.
Fixes: 2eb6a1a3e5 ("app/crypto-perf: fix crypto op init")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Aligning Mellanox SPDX copyrights to a single format.
In addition replace to SPDX licence files which were missed.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Since we have support for the strlcpy function in DPDK, replace all
instances where a string is copied using snprintf.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Replace strncpy with snprintf to avoid overwriting the last
NULL character.
Coverity issue: 143252
Fixes: 2deb6b5246 ("app/procinfo: add collectd format and host id")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Add remaining subdirectories in the app folder to the meson build.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
All other apps in the app folder use "-" rather than "_" to separate words
in the app name, so rename proc_info to be consistent.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Since most apps are built in largely the same way, generalize the logic
into a foreach loop in app/meson.build file.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The dynamic link is broken for ARM platform because the dependencies
of the DPAA PMD are not declared.
Fixes: 83c82e15e1 ("app/testpmd: support loopback config for DPAA")
Cc: stable@dpdk.org
Reported-by: Marco Varlese <mvarlese@suse.de>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch fixes issue during dealing with flow
director filter.
Fixes: 6c684f579d ("app/testpmd: add or delete flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Some hardware doesn't support disabling CRC strip. In techboard it has
been decided to enable CRC strip always.
The testpmd update in commit 8b9bd0efe0, enables CRC strip only if
PMD reports CRC strip capability. Not all PMDs updated to report CRC
strip.
For the PMDs not reporting CRC strip testpmd behavior changed and
disabling CRC strip for them. And this may generate error for PMDs that
doesn't support disabling CRC strip.
Removing capability check for this release. In long term there can be
option to remove CRC strip flag completely or adding a new flag to let
PMD say disabling is not supported.
Fixes: 8b9bd0efe0 ("app/testpmd: disable Rx VLAN offloads by default")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The port_conf for the DCB configuration should
inherit the same configuration of the port.
Fixes: 0074d02fca ("app/testpmd: convert to new Rx offloads API")
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
A new function was added to get a Tx port index as a function of the
topology mode and the Rx port index.
Use this function to get the Tx port index of simple stream.
Signed-off-by: Matan Azrad <matan@mellanox.com>
The testpmd user can configure port topology mode to define the port
topology between the testpmd forward ports(paired, chained and loop).
When multi-queue ports are configured by the user, the testpmd
streams are created by rss_fwd_config_setup() function, this function
doesn't take into account the chained topology mode and configures the
forward streams with paired topology mode in this case.
Configure the stream Tx port by dedicated function which calculates
a valid Tx port index as a function of the topology mode and the Rx
port index.
Fixes: af75078 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
When multi-queue ports are configured by the user, the testpmd streams
are created by rss_fwd_config_setup() function.
This function may configure to the streams either invalid Rx ports or
invalid Tx ports.
An invalid Tx port is configured when the number of ports is odd.
In this case, the last Tx port will be always invalid.
An invalid Rx port is configured when NUMA support is configured by the
user and the number of forward ports is much smaller than the number of
all ports. In this case, also the Tx port is invalid.
Change calculations to get valid ports.
Fixes: af75078 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Documentation and help string more clear describe meaning of
arguments for DDP add del function.
Fixes: 856ceb331b ("app/testpmd: enable DDP remove profile feature")
Cc: stable@dpdk.org
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The binaries and apps in DPDK all need to be linked against the
execinfo library on FreeBSD so add this as a dependency in cases
where it is found. It's available by default on BSD, but not
at all on Linux
Fixes: 16ade738fd ("app/testpmd: build with meson")
Fixes: 89f0711f9d ("examples: build some samples with meson")
Fixes: b5dc795a8a ("test: build app with meson as dpdk-test")
Fixes: 2ff67267b0 ("app/eventdev: build with meson")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Increase the default RX/TX ring sizes to 1024/1024 to
accommodate for NICs with higher throughput (25G, 40G etc)
Signed-off-by: Kevin Laatz <kevin.laatz@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Since METER action is supported by the testpmd application
suitable entry should exist in flow actions information table.
Without that testpmd will return error on adding a new flow to
the list of flows attached to a given port.
Fixes: 30ffb4e67e ("app/testpmd: add commands traffic metering and policing")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch moves the definition of 3 variables in testpmd.h
into the respective .c file. The idea behind this move is
to allow external applications to compile against testpmd
without throwing compilation errors related to multiple
definition of variables.
Also, an extern dcb_q_mapping in testpmd.h is removed
since it appears that this variable is not defined
elsewhere in the tree.
Signed-off-by: Georgios Katsikas <katsikas.gp@gmail.com>
Introduced a run time command to change the
log level for a given log type. Added the
necessary documentation.
Signed-off-by: Elza Mathew <elza.mathew@intel.com>
The word size of port_id is now 16 bits, but there were parsing directives
that assumed it was still of type UINT8, resulting in incorrect commandline
parse results.
Fixes: f14a210a65 ("app: fix port id type")
Cc: stable@dpdk.org
Signed-off-by: Remy Horton <remy.horton@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In current design, we can't enable SW checksum calculation
for the devices which don't have checksum offloading abilities
via the command "csum set ip|tcp|udp|sctp|outer-ip sw <port_id>".
But SW checksum calculation shouldn't depend on HW offloading
abilities. This patch is to fix this issue.
Fixes: 3926dd2b66 ("app/testpmd: enforce offload capabilities check")
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Reviewed-by: Shahaf Shuler <shahafs@mellanox.com>
Removed the hardcoded preconfigured Rx VLAN offload configuration
from testpmd and changed the Rx offload command line parameters from
disable to enable.
It has been decided by the Technical Board that testers who wish to
use these offloads will now have to explicitly write them in the
command-line when running testpmd.
The agreement is to keep two exceptions enabled by default in 18.02:
Rx CRC strip and Tx fast free.
Motivation:
Some PMDs such at the mlx4 may not implement all the offloads.
After the offload API rework assuming no offload is enabled by default,
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API") trying
to enable a not supported offload is clearly an error which will cause
configuration failing.
Considering that testpmd is an application to test the PMD, it should
not fail on a configuration which was not explicitly requested.
The behavior of this test application is then turned to an opt-in
model.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Using registration to all ports includes also the ports which should not
be used by the application.
It is nice to print each port event by testpmd but in case of RMV
event, testpmd tries to detach the port and this case is problematic
when the port should not be used by the application.
Check the port validation before detach API calling.
Fixes: 4fb82244b3 ("app/testpmd: extend event printing")
Signed-off-by: Matan Azrad <matan@mellanox.com>
rte_eth_dev_is_valid_port() API validates each valid port from ethdev
point of view and may validate ports which should not be used by the
application.
Testpmd should use only the ports available through the
RTE_ETH_FOREACH_DEV iterator.
Replace rte_eth_dev_is_valid_port() usage by RTE_ETH_FOREACH_DEV
iterator usage for testpmd ports validation.
Fixes: 7d89b26103 ("app/testpmd: use ethdev iterator to list devices")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
add check for rte_bbdev_callback_register() retun
Coverity issue: 257027
Fixes: f714a18885 ("app/testbbdev: add test application for bbdev")
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
check that iter > 0 before division
Coverity issue: 257027, 257038, 257014
Fixes: f714a18885 ("app/testbbdev: add test application for bbdev")
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
use snprintf instead of strncpy to ensure null termination when
copying test_vector_filename from cmd arguments.
Coverity issue: 257001
Fixes: f714a18885 ("app/testbbdev: add test application for bbdev")
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
The port dequeue depth value has to be compared against the maximum
allowed dequeue depth reported by the event drivers.
Fixes: 3617aae53f ("app/eventdev: add event Rx adapter setup")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Added support for detecting march and mcpu by reading midr_el1 register.
The implementer, primary part number values read can be used to figure
out the underlying arm cpu.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Any flags added to the project args are automatically added to all builds,
both native and cross-compiled. This is not what we want for the -march
flag as a valid -march for the cross-compile is not valid for pmdinfogen
which is a native-build tool.
Instead we store the march flag as a variable, and add it to the default
cflags for all libs, drivers, examples, etc. This will allow pmdinfogen to
compile successfully in a cross-compilation environment.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This patch changes the build process to group all .o files for a driver or
library into a static archive first, and then link the .o files together
into a shared library. This eliminates the need for separate static or
shared object builds when packaging, for instance.
The "default_library" configuration option now only affects the apps and
examples, which are either linked against the static or shared library
versions depending on the value of the option.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
The EAL and compat libraries were special-cases in the library build
process, the former because of it's complexity, and the latter because
it only consists of a single header file.
By reworking the EAL meson.build files, we can eliminate the need for it to
be a special case, by having it build up and return the list of sources,
headers, and objects and return those to the higher level build file. This
should also simplify the building of EAL, as we can eliminate a number of
meson.build files that would no longer be needed, and have fewer, but
larger meson.build files (9 now vs 14 previous) - thereby making the logic
easier to follow and items easier to find.
Once done, we can pull eal into the main library loop, with some
modifications to support it. Compat can also be pulled it once we add in a
check to handle the case of an empty sources list.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
This commit fixes the setting of relative rpath on dpdk-testpmd for
drivers ($libdir/dpdk/drivers) to the correct absolute rpath
($prefix$libdir/dpdk/drivers)
Fixes: a25a650be5 ("build: add infrastructure for meson and ninja builds")
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Reviewed-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Add checks during build to ensure that all symbols in the EXPERIMENTAL
version map section have __experimental tags on their definitions, and
enable the warnings needed to announce their use. Also add an
ALLOW_EXPERIMENTAL_APIS define to allow individual libraries and files
to declare the acceptability of experimental api usage
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
This patch adds a call to the newly introduced cleanup()
function just before quitting the app.
Adding this function call before quitting from a secondary processes
is important, as otherwise it will leak hugepage memory. For a secondary
process that is run multiple times, this could cause hugepage memory
to become depleted and stop a secondary process from starting.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Vipin Varghese <vipin.varghese@intel.com>
This patch adds a call to the newly introduced cleanup()
function just before quitting the pdump app.
Adding this function call before quitting from a secondary processes
is important, as otherwise it will leak hugepage memory. For a secondary
process that is run multiple times, this could cause hugepage memory
to become depleted and stop a secondary process from starting.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Vipin Varghese <vipin.varghese@intel.com>
Increase the internal limit for flow types from 32 to 64
to support future flow type extensions.
Change type of variables from uint32_t[] to uint64_t[]:
rte_eth_fdir_info.flow_types_mask
rte_eth_hash_global_conf.sym_hash_enable_mask
rte_eth_hash_global_conf.valid_bit_mask
This modification affects the following components:
net/i40e
net/ixgbe
app/testpmd
ABI versioning used to keep ABI stability.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Two macros were defined in cryptodev, to serve the same
purpose: RTE_CRYPTODEV_NAME_LEN (in the config file) and
RTE_CRYPTODEV_NAME_MAX_LEN (in the rte_cryptodev.h file).
Since the second one is part of the external API,
the first one has been removed, avoiding duplications.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Add support for IMIX performance tests, where a distribution
of various packet sizes can be submitted to a crypto
device, testing a closer to a real world scenario.
A sequence of packet sizes, selected randomly from a list of packet
sizes (with "buffer-sz" parameter) with a list of the weights
per packet size (using "imix" parameter), is generated
(the length of this sequence is the same length as the pool,
set with "pool-sz" parameter).
This sequence is used repeteadly for all the crypto
operations submitted to the crypto device (with "--total-ops" parameter).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
This is a pipeline test case that aims at testing the following with
``all types queue`` eventdev scheme.
1. Measure the end-to-end performance of an event dev with a ethernet dev.
2. Maintain packet ordering from Rx to Tx.
The atq queue test functions as same as ``pipeline_queue`` test.
The difference is, It uses, ``all type queue scheme`` instead of separate
queues for each stage and thus reduces the number of queues required to
realize the use case.
Note: The --prod_type_ethdev is mandatory for running the application.
Example command to run pipeline atq test:
sudo build/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \
--test=pipeline_atq --wlcore=1 --prod_type_ethdev --stlist=ao
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
This is a pipeline queue test case that aims at testing the following:
1. Measure the end-to-end performance of an event dev with a ethernet dev.
2. Maintain packet ordering from Rx to Tx.
The pipeline queue test configures the eventdev with Q queues and P ports,
where Q is (nb_ethdev * nb_stages) + nb_ethdev and P is nb_workers.
The user can choose the number of workers and number of stages through the
--wlcores and the --stlist application command line arguments respectively.
The probed ethernet devices act as producer(s) for this application.
The ethdevs are configured as event Rx adapters that enables them to
injects events to eventdev based the first stage schedule type list
requested by the user through --stlist the command line argument.
Based on the number of stages to process(selected through --stlist),
the application forwards the event to next upstream queue and when it
reaches last stage in the pipeline if the event type is ATOMIC it is
enqueued onto ethdev Tx queue else to maintain ordering the event type is
set to ATOMIC and enqueued onto the last stage queue.
On packet Tx, application increments the number events processed and print
periodically in one second to get the number of events processed in one
second.
Note: The --prod_type_ethdev is mandatory for running the application.
Example command to run pipeline queue test:
sudo build/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \
--test=pipeline_queue --wlcore=1 --prod_type_ethdev --stlist=ao
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The event master lcore's test termination and the logic to print the mpps
are common for the queue and all types queue test.
Move them as the common function.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Setup one port event port for Tx and link the respective event queue.
Register the Tx function as a service to be called from a service core.
The Tx function dequeues the events from the event queue and transmits
the packet to its respective ethernet port.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Setup one port per worker and link to all queues and setup producer port
based on Rx adapter capabilities.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Add common ethdev port setup and destroy along with event dev destroy.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Pipeline test has the queue and all types queue variants.
Introduce test_pipeline_common* to share the common code between those
tests.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add logs for packet distribution across worker cores to be printed
along with the test results.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Fix the event device queue count reported when producer type is Rx
adapter for perfomance queue and atq test.
Fixes: 20eb154e04 ("app/testeventdev: add perf queue test")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add service core configuration for Rx adapter. The configuration picks
the least used service core to run the service on.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Add functions to setup and configure Rx adapter based on the number of
ethdev ports setup.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add ethernet device destroy functions to stop and close ethdev ports
if they are configured when prod_type_ethdev option is enabled.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add pktmbuf pool creation used when configuring ethernet device as event
producer.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Modify app setup to accommodate event port and queue setup based on the
number of ethernet ports.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add command line option --prod_type_ethdev to specify that the events
are generated by ethernet device.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
- full test suite for bbdev
- test App works seamlessly on all PMDs registered with bbdev
framework
- a python script is provided to make our life easier
- supports execution of tests by parsing Test Vector files
- test Vectors can be added/deleted/modified with no need for
re-compilation
- various tests can be executed:
(a) Throughput test
(b) Offload latency test
(c) Operation latency test
(d) Validation test
(c) Sanity checks
Signed-off-by: Amr Mokhtar <amr.mokhtar@intel.com>
Unlike every other DPDK application's compilation, proc_info's
compilation cannot be turned off on Linux. Fix it by adding a
config option to base linuxapp config.
Fixes: 22561383ea ("app: replace dump_cfg by proc_info")
Cc: stable@dpdk.org
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
If an invalid number of TX queues is configured from testpmd run-time
command like "port config all txq number" or from --txq in the command
to start testpmd, the global variable nb_txq is updated by this invalid
value without this patch. It may cause testpmd crash. This patch refuses
invalid txq setting and keeps its last correct value.
Fixes: ce8d561418 ("app/testpmd: add port configuration settings")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
If an invalid number of RX queues is configured from testpmd run-time
command like "port config all rxq number" or from --rxq in the command
to start testpmd, the global variable nb_rxq is updated by this invalid
value without this patch. It may cause testpmd crash. This patch refuses
invalid rxq setting and keeps its last correct value.
Fixes: ce8d561418 ("app/testpmd: add port configuration settings")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Tested-by: Yuan Peng <yuan.peng@intel.com>
This patch adds command to configure input set for RSS,
FDIR, and FDIR flexible payload.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
There are new Ethernet device events - NEW and DESTROY, and new option
to register all ports by one call.
Adjust application to aforementioned changes.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add possibility to load file with raw packet and set it as a
template for FDIR setup.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add the ability to match VNI and protocol fields of GENEVE protocol
header.
Signed-off-by: Roman Zhukov <roman.zhukov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This command will simulate the process of setting the
eth-peer from command line.
It will be useful to perform extra testing.
usage:
testpmd> set eth-peer <port_id> <peer_addr>.
Signed-off-by: Wisam Jaddo <wisamm@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Enable the DEV_TX_OFFLOAD_MBUF_FAST_FREE in case the underlying device
supports.
This is to preserve the previous offloads configuration made according
to the PMD defaults.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
On ethdev there is an API to configure VLAN offloads after the port
was started and without reconfiguration of the port or queues.
In the current design of the application, when the Rx offloads are
changed (through "port config all" CLI command) the port configuration
is overwritten, therefore the configuration made for the VLAN is lost.
This patch is to address the issue by a configuration of each port Rx
offloads separately instead of using the global Rx config. Such
adjustment is required due to the conversion of the application to the
new offloads API.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In the current design it was possible for offload to be set even though
the device is not supporting it. A warning message was printed instead.
This is a wrong behaviour, as application should set only the offloads
reported by the capabilities of the device.
This patch adds verification for the offloads being set and make sure
the offload configuration passed to the device always match its
capabilities.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Since testpmd is now using the new Ethdev offloads API and there is
a way configure each of the tx offloads from CLI or command line,
there is no need for the txqflags configuration anymore.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds command line option to set hex value for the ports Tx
offloads flags.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The tx_ol_flags field was used in order to control the different
Tx offloads set. After the conversion to the new Ethdev Tx offloads API
it is not needed anymore as the offloads configuration is stored in
ethdev structs.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The mbuf ol_flags were taken directly from testpmd internal enumeration
leading to incorrect values.
addressing only insertion offload flags as the checksum flags by
the application design are only with csum forwarding.
Fixes: e9e23a617e ("app/testpmd: add flowgen forwarding engine")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Ethdev Tx offloads API has changed since:
commit cba7f53b71 ("ethdev: introduce Tx queue offloads API")
Convert the application to use the new API.
This patch mandates the port to be stopped when configure the Tx
offloads. This is because the PMD must be aware to the offloads changes
on the device and queue configuration.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds supports for checking if a single port is stopped.
currently there is a function to check only for all ports.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Ethdev Rx offloads API has changed since:
commit ce17eddefc ("ethdev: introduce Rx queue offloads API")
Convert the application to use the new API. The is no functionality
changes rather simple conversion of the flags.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
The print of the port configuration was only according to configuration
of the first port.
Fixes: f2c5125a68 ("app/testpmd: use default Rx/Tx port configuration")
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Repeated occurrences of 'the'.
The change was obtained using the following command:
sed -i "s;the the ;the ;" `git grep -l "the "`
Signed-off-by: Thierry Herbelot <thierry.herbelot@6wind.com>
Add following CLIs to testpmd application;
- show port metering and policing capabilities.
- enable/disable meter of the MTR object.
- update the MTR object dscp table entries.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch updates the metering and policing CLIs as follows:
- change name of set port meter CLI to create port meter and add meter
enable option, dscp table entries arguments, action mask, policer actions
and previous meter color option as an input color
- set the right metering algorithm in add meter profile CLIs related to
srtcm(rfc2697) and trtcm(rfc2698,rfc4115)
- change clear flag type from uint32_t to string in show meter stats CLI
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Instead of using USERx logs, register a dynamic log type, as introduced in
commit c1b5fa94a4 ("eal: support dynamic log types").
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Display some more useful information from dev_info when
calling "show port info <portid>".
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Running txonly mode can crash with "--txpkts=20,470". copy_len should be
properly adjusted.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
In the feature of increasing port_id range from 8 bits to 16 bits,
vlan port_id allocation function was forget to substitute UINT8 with
UINT16, so the vlan port_id was allocated as a inccrete number.
Fixes: 28caa76aea ("app/testpmd: fix port id type")
Cc: stable@dpdk.org
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Reviewed-by: Zhiyong Yang <zhiyong.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Replace the BSD license header with the SPDX tag for files
with only an Intel copyright on them.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
The xenvirt PMD was removed from 17.11
while this link parameter was added.
Fixes: 5b590fbe09 ("app/testpmd: add traffic management forwarding mode")
Cc: stable@dpdk.org
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Currently, testpmd CLI doesn't permit to add leaf and non-leaf node when
port is started. It doesn't work in case of i40e device as DCB
configuration is deleted when port is stopped. Therefore, removes the
port status check before invoking leaf and nonleaf node API in the cli.
If needed, device can add port status check at the driver layer.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When defining two failsafe devices in testpmd the port numbers of the
failsafe devices may not be consecutive.
For example: if failsafe device includes a PCI device and a TAP device
then failsafe port numbers would be 0 and 3.
Port 0 - failsafe #1 device
Port 1 - PCI #1 device
Port 2 - TAP #1 device
Port 3 - failsafe #2 device
Port 4 - PCI #2 device
Port 5 - TAP #2 device
If forwarding is defined between the failsafe devices including a peer
address the forwarding should be between peer addresses of ports 0
and 3. Instead testpmd establishes forwarding between peer addresses
of consecutive ports 0 and 1. This commit fixes this bug.
Fixes: af75078fec ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The mempool and the physical address of the crypto operation
at mempool initialization were not being set,
leading to incorrect physical addresses.
Fixes: bf9d6702ec ("app/crypto-perf: use single mempool")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Some drivers might allow to commit the traffic management hierarchy
while being in running state. Therefore, removes port status check
before invoking hierarchy commit API in the cli. If needed, device can
add port status check at the driver layer.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Renamed data type from phys_addr_t to rte_iova_t.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
The following inline functions and macros have been renamed to be
consistent with the IOVA wording:
rte_mbuf_data_dma_addr -> rte_mbuf_data_iova
rte_mbuf_data_dma_addr_default -> rte_mbuf_data_iova_default
rte_pktmbuf_mtophys -> rte_pktmbuf_iova
rte_pktmbuf_mtophys_offset -> rte_pktmbuf_iova_offset
The deprecated functions and macros are kept to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Rename buf_physaddr to buf_iova.
Keep the deprecated name in an anonymous union to avoid breaking
the API.
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The function rte_mempool_virt2phy() is renamed to rte_mempool_virt2iova().
The new function has one less parameter because it is unused.
The deprecated function is kept as an alias to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
The function rte_malloc_virt2phy() is renamed to rte_malloc_virt2iova().
The deprecated name is kept as an alias to avoid breaking the API.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The memzone header is often included without good reason.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Use service cores for offloading event scheduling in case of
centralized scheduling instead of calling the schedule api directly.
This removes the dependency on dedicated scheduler core specified by
giving command line option --slcore.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
With the current scheme of event queue configuration the cfg schedule
type macros (RTE_EVENT_QUEUE_CFG_*_ONLY) are inconsistent with the
event schedule type (RTE_SCHED_TYPE_*) this requires unnecessary
conversion between the fastpath and slowpath API's while scheduling
events or configuring event queues.
This patch aims to fix such inconsistency by using event schedule
types (RTE_SCHED_TYPE_*) for event queue configuration.
This patch also fixes example/eventdev_pipeline_sw_pmd as it doesn't
convert RTE_EVENT_QUEUE_CFG_*_ONLY to RTE_SCHED_TYPE_* which leads to
improper events being enqueued to the eventdev.
Fixes: adb5d5486c ("examples/eventdev_pipeline_sw_pmd: add sample app")
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
The PCI lib defines the types and methods allowing to use PCI elements.
The PCI bus implements a bus driver for PCI devices by constructing
rte_bus elements using the PCI lib.
Move the relevant code out of the EAL to its expected place.
Libraries, drivers, unit tests and applications are updated to use the
new rte_bus_pci.h header when necessary.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
When using "show port xstats all" command to show xstats, the output
is usually too long to obtain what you really want, especially when
multi-queue is enabled.
Added an option to set whether zero values should be displayed
or not for xstats. The "set xstats-hide-zero on|off" command enables
the user to decide if the zero values should be shown while
displaying xstats.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Signed-off-by: Elza Mathew <elza.mathew@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Fixes: 4cfe399f65 ("net/bnxt: support to set VF rxmode")
Fixes: 36735a932c ("net/bnxt: support set VF QOS and MAC anti spoof")
Cc: stable@dpdk.org
Signed-off-by: Aviad Yehezkel <aviadye@mellanox.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
When number of DCB traffic class is 4, user priority should be
mapped to traffic class 0/1/2/3.
Fixes: cb60ede6e3 ("ethdev: rename DCB field in config structs")
Cc: stable@dpdk.org
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Struct rss_conf.rss_key_len is not initialised forcing the user to
verify the rss_conf.rss_key pointer to know if the key is present
or not. rss_conf.rss_key_len should have a valid length according
to the size of the rss_key pointed.
Fixes: 560e02ee52 ("app/testpmd: configure RSS without restart")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
The four function declarations have no function implementation,
remove them.
Fixes: 0db70a8030 ("app/testpmd: add commands for filters")
Cc: stable@dpdk.org
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
Add following CLIs in testpmd application for device traffic management;
- commands to add TM hierarchy nodes (leaf and nonleaf).
- command for runtime update of node weight.
- command to commit the TM hierarchy
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
app/test-crypto-perf/main.c:596:6: error: ‘total_nb_qps’ may be
used uninitialized in this function [-Werror=maybe-uninitialized]
if (i == total_nb_qps)
^
Fixes: c4f916e332 ("app/crypto-perf: support multiple queue pairs")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Increase port id range to 16 bits and remove the unnecessary cast.
Fixes: f8244c6399 ("ethdev: increase port id range")
Signed-off-by: Zhiyong Yang <zhiyong.yang@intel.com>
According to the API, AES-CCM has special requirements
when setting IV and AAD fields.
The L2fwd-crypto app is updated to set the nonce (IV)
and AAD in the right positions in these two fields
(1 byte after start of IV field and 18 bytes after start
of AAD).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
In order to improve memory utilization, a single mempool
is created, containing the crypto operation and mbufs
(one if operation is in-place, two if out-of-place).
This way, a single object is allocated and freed
per operation, reducing the amount of memory in cache,
which improves scalability.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Add support for multiple queue pairs, when there are
more logical cores available than crypto devices enabled.
For instance, if there are 4 cores available and
2 crypto devices, each device will have two queue pairs.
This is useful to have multiple logical cores using
a single crypto device, without needing to initialize
a crypto device per core.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
For throughput and latency tests, it is not required
to populate the mbufs with any test vector.
For verify test, there is already a function that rewrites
the mbufs every time they are going to be used with
crypto operations.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
When running the verify test, mbufs in the pool were
populated with the test vector loaded from a file.
To avoid limiting the number of operations to the pool size,
mbufs will be rewritten with the test vector, before
linking them to the crypto operations.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Instead of parsing number of segments, from the command line,
parse segment size, as it is a more usual case to have
the segment size fixed and then different packet sizes
will require different number of segments.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Since DPDK 17.08, there is specific parameters
for AEAD algorithm, like AES-GCM. When verifying
crypto operations with test vectors, the parser
was not reading AEAD data (such as IV or key).
Fixes: 8a5b494a7f ("app/test-crypto-perf: add AEAD parameters")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Instead of prepending the AAD (Additional Authenticated Data)
in the mbuf, it is easier to set after the crypto operation,
as it is a read-only value, like the IV, and then it is not
restricted to the size of the mbuf headroom.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
Currently, there is some duplication in all the test types,
in the crypto performance application.
In order to improve maintainability of this code,
and ease future work on it, common functions have been separated
in a different file that gets included in all the tests.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Akhil Goyal <akhil.goyal@nxp.com>
When using DES-CBC, packet size has to be multiple
of 8 bytes, but if a list of packets is provided.
the check was not correct.
Fixes: fc4600fb25 ("app/crypto-perf: add extra option checks")
Cc: stable@dpdk.org
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Radu Nicolau <radu.nicolau@intel.com>
This patch adds a new benchmarking mode, which is intended for
microbenchmarking individual parts of the cryptodev framework,
specifically crypto ops alloc-build-free, cryptodev PMD enqueue
and cryptodev PMD dequeue.
It works by first benchmarking crypto operation alloc-build-free
loop (no enqueues/dequeues happening), and then benchmarking
enqueue and dequeue separately, by first completely filling up the
TX queue, and then completely draining the RX queue.
Results are shown as cycle counts per alloc/build/free, PMD enqueue
and PMD dequeue.
One new test mode is added: "pmd-cyclecount"
(called with --ptest=pmd-cyclecount)
New command-line argument is also added:
--pmd-cyclecount-delay-ms: this is a pmd-cyclecount-specific parameter
that controls the delay between enqueue and dequeue. This is
useful for benchmarking hardware acceleration, as hardware may
not be able to keep up with enqueued packets. This parameter
can be increased if there are large amounts of dequeue
retries.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This parameter makes number of cryptodev descriptors adjustable
and defaults to earlier hardcoded default of 2048.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch add a API configuration of queue region in rss.
It can parse the parameters of region index, queue number,
queue start index, user priority, traffic classes and so on.
According to commands from command line, it will call i40e
private API and start the process of set or flush queue region
configure. As this feature is specific for i40e, so private API
will be used. Aslo add a document for these new commands.
Queue region only support PF by now, so this document is
only for configuration of queue region on PF port.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
This commit extends the testpmd application with new forwarding engine
that demonstrates the use of ethdev traffic management APIs and softnic
PMD for QoS traffic management.
In this mode, 5-level hierarchical tree of the QoS scheduler is built
with the help of ethdev TM APIs such as shaper profile add/delete,
shared shaper add/update, node add/delete, hierarchy commit, etc.
The hierarchical tree has following nodes; root node(x1, level 0),
subport node(x1, level 1), pipe node(x4096, level 2),
tc node(x16348, level 3), queue node(x65536, level 4).
During runtime, each received packet is first classified by mapping the
packet fields information to 5-tuples (HQoS subport, pipe, traffic class,
queue within traffic class, and color) and storing it in the packet mbuf
sched field. After classification, each packet is sent to softnic port
which prioritizes the transmission of the received packets, and
accordingly sends them on to the output interface.
To enable traffic management mode, following testpmd command is used;
$ ./testpmd -c c -n 4 --vdev
'net_softnic0,hard_name=0000:06:00.1,soft_tm=on' -- -i
--forward-mode=tm
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Precompiler instructions #ifdef RTE_LIBRTE_I40E_PMD ... #endif
were not placed correctly, which caused number of
compilation errors if I40E PMD is disabled.
Fixes: 5a4806d304 ("app/testpmd: support updating pctype mapping")
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
In container, the process cannot be terminated by SIGINT/SIGTERM when
execute with 'stats-period' option.
Fixed by adding a flag to exit stats period loop after received either
SIGINT or SIGTERM.
Fixes: cfea1f3048 ("app/testpmd: print statistics periodically")
Cc: stable@dpdk.org
Signed-off-by: Phil Yang <phil.yang@arm.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
The corrupted code didn't check the port availability when
it was trying to set the forward port IDs array.
However, when it was counting the number of ports, the availability
was checked by RTE_ETH_FOREACH_DEV iterator.
Hence, even when ETH devices ports were not in ATTACHED state,
the testpmd tried to forward traffic by them and got segmentation
fault at queue access time.
For example:
When EAL command line parameters include two devices, the first
is failsafe with two sub devices and the second is any device,
testpmd gets two devices by the iterator and sets for forwarding
both, the failsafe device and the failsafe first sub device
(instead of the second sub device).
After the first failsafe sub device state was changed to DEFERRED,
testpmd tries to forward traffic through the deferred device
because it didn't check the port availability in setting time.
The fix uses the RTE_ETH_FOREACH_DEV iterator for the forward
port IDs default setting.
Fixes: cb894d99ec ("ethdev: add deferred intermediate device state")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
in parse_ringnuma_config/parse_portnuma_config functions, port_id
should be less than RTE_MAX_ETHPORTS, but port_id_is_invalid check
assumes that port_id may be RTE_PORT_ALL (65535).
Also fix port_id storage size.
Fixes: 4468635fdd ("app/testpmd: forbid actions on invalid port")
Cc: stable@dpdk.org
Signed-off-by: Li Han <han.li1@zte.com.cn>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
This issue was about passing unsigned argument where should be signed
number.
In reality this is about wrong usage of fseek and ftell to determine
filesize.
This patch is compliant to suggestions from FIO19-C:
"Do not use fseek() and ftell() to compute the size of a regular file"
Coverity issue: 143454
Fixes: a92a5a2cbb ("app/testpmd: add command for loading DDP")
Cc: stable@dpdk.org
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Currently, testpmd just allows to query the RETA info only when the
required size equals to configured RETA size.
This patch allows to query any RETA size <= the configured size. This
helps when the RETA size is big (say 512) and when I just want to peak
few RETA entries.
Signed-off-by: Yuanhan Liu <yliu@fridaylinux.org>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch adds GSO support to the csum forwarding engine. Oversized
packets transmitted over a GSO-enabled port will undergo segmentation
(with the exception of packet-types unsupported by the GSO library).
GSO support is disabled by default.
GSO support may be toggled on a per-port basis, using the command:
"set port <port_id> gso on|off"
The maximum packet length (including the packet header and payload) for
GSO segments may be set with the command:
"set gso segsz <length>"
Show GSO configuration for a given port with the command:
"show port <port_id> gso"
Signed-off-by: Jiayu Hu <jiayu.hu@intel.com>
Signed-off-by: Mark Kavanagh <mark.b.kavanagh@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
