The meter suffix flow item pointer restore is not correct to decrease
a fixed value. The incorrect operation will cause incorrect match to
the meter suffix flow, the flow create will fail once the magic number
in the wrong offset memory start with RTE_FLOW_ITEM_TYPE_END.
The pointer should decrease the real offset it increases.
Set the decrease value to the real offset the pointer increases to fix
the issue.
Fixes: 9ea9b049a9 ("net/mlx5: split meter flow")
Cc: stable@dpdk.org
Reported-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
This patch adds to MLX5 PMD support of matching on GTP item,
fields msg_type and teid, according to RFC [1].
GTP item validation and translation functions are added and called.
GTP tunnel type is added to supported tunnels.
[1] http://mails.dpdk.org/archives/dev/2019-December/152799.html
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Previous fix added translation of Rx hash fields to PRM format.
This patch optimizes the fix, to perform value translation only
if value is not zero.
In case value is zero, there is no need to translate it.
Fixes: c3e33304a7 ("net/mlx5: fix setting of Rx hash fields")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The free on completion queue keeps the indices of elts array,
all mbuf stored below this index should be freed on arrival
of normal send completion. In debug version it also contains
an index of completed transmitting descriptor (WQE) to check
queues synchronization.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The new software manged entity is introduced in Tx datapath
- free on completion queue. This queue keeps the information
how many buffers stored in elts array must freed on send
completion. Each element of the queue contains transmitting
descriptor index to be in synch with completion entries (in
debug build only) and the index in elts array to free buffers.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This is preparation step, we are going to store the index
of elts to free on completion in the dedicated free on
completion queue, this patch updates the elts freeing routine
and updates Tx error handling routine to be synced with
coming new queue.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The complete request flag is set once per Tx burst call,
the code of appropriate routine moved to the end of sending
loop. This is preparation step to remove WQE reserved field
usage to store index of elts to free.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Add support for reading the firmware version.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add basic, per queue and extended statistics for
RX and TX, both from the adapter and the driver.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add code to manipulate the RSS configuration
used by the adapter.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add support for managing RX filters based on MAC and VLAN.
Hardware cannot provide the list of filters, thus we keep
a local list.
Add support for promisc and allmulticast modes.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add support for port start/stop and handle basic features
including MTU and link up/down.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add support for the notify queue, which is used for events
published by the NIC.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add support for the admin queue, which is used for most
of the NIC configurations.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Doorbell registers are used by the driver to signal to the NIC
that requests are waiting on the message queues.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Initialize LIFs (Logical Interfaces) which represents
external connections. The NIC can multiplex many LIFs
to a single port, but in most setups, LIF0 is the
primary control for the port.
Create a device for each LIF.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add port management commands that apply to the physical
ports associated with the PCI device, which might be
shared among several logical interfaces.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Register the Pensando ionic PMD (net_ionic) and define initial probe
and remove callbacks with adapter initialization.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add debug options to the config file.
Define macros used for logs and make use of config file options
to enable them.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
Add makefile and config file options to compile the Pensando ionic PMD.
Add feature and version map file.
Update maintainers file.
Signed-off-by: Alfredo Cardigliano <cardigliano@ntop.org>
Reviewed-by: Shannon Nelson <snelson@pensando.io>
V1000/R1000 processors are using the same PCI ids for the network
device as SNOWYOWL processor but has altered register definitions
for determining the window settings for the indirect PCS access.
Add support to check for this hardware and if found use the new
register values.
Signed-off-by: Selwin Sebastian <selwin.sebastian@amd.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
In the Rx datapath the flags in the newly allocated mbufs
are all explicitly cleared but the EXT_ATTACHED_MBUF must be
preserved. It would allow to use mbuf pools with pre-attached
external data buffers.
The vectorized rx_burst routines are updated in order to
inherit the EXT_ATTACHED_MBUF from mbuf pool private
RTE_PKTMBUF_POOL_F_PINNED_EXT_BUF flag.
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Use new marker typedef available in EAL.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Add pmd unix socket server to enable external tool applications to
trigger flow dump.
Socket path:
/var/tmp/dpdk_mlx5_<pid>
Socket format:
io_raw: port_id of uint16
file: file descriptor of int
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Dump fdb/nic_rx/nic_tx raw flow data into specified file.
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
The mlx5 datapath does not implement any endianness conversions
for the metadata being sent and received to provide the better
performance (because these conversions would be performed for
each packet). These metadata are also involved into flow processing
(there might be some flows matching on metadata patterns or setting
the new metadata values) inside the NIC. It order to configure
hardware in correct way all necessary endianness conversions are
done by rte_flow handling code (only once on flow creation). This
patch fixes one of these conversions for the little-endian hosts
in case if META/MARK items are less than 32 bits.
Fixes: acfcd5c52f ("net/mlx5: update meta register matcher set")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Matcher is flow table related structure providing the flow pattern
to be translated directly in hardware controlling data. This structure
includes the metadata register c0 field, that might be engaged to
support META and MARK related flow items and actions. Also, this
register might be used by kernel to specify the source vport index.
In this case (if kernel uses the field) the register c0 is split
into two 16-bit subfields - one for META/MARK items and another
to handle vport.
The actual configuration is queried by PMD from kernel in runtime
and depending on the mask returned by kernel the PMD can use upper
or lower half of register c0 field. This patch adds the missing
support for upper half. This missed support caused the non-operational
META/MARK items on some kernel configurations.
Fixes: e554b672aa ("net/mlx5: support flow tag")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Matcher is flow table related structure providing the flow pattern
to be translated directly in hardware controlling data. Some fields
in this structure might be split (by software) between multiple items.
For example, the metadata register c0 field in the matcher might be
split into two independent subfields - the source vport index and
META item value. These subfields have no permanent assigned masks,
the actual configuration is queried from the kernel drivers in
runtime. To handle source vport value (the port of e-Switch which
is origin of the packet) the kernel might use the dedicated vport
field in the matcher or the part of register c0 field, depending
on configuration.
To setup the matcher structure fields the macro MLX5_SET is used.
MLX5_SET configures the specified 32-bit field as whole entity.
For metadata register c0 we should take into account the provided
mask in order to configure the specified subfield bits only,
otherwise setting vport overrides the META values and vice versa.
Fixes: acfcd5c52f ("net/mlx5: update meta register matcher set")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Added CL37 Auto-neg support for 1Gbps interface in axgbe DPDK driver
Signed-off-by: Girish Nandibasappa <girish.nandibasappa@amd.com>
Acked-by: Ravi Kumar <ravi1.kumar@amd.com>
Added support for 1Gbps and 2.5Gbps in axgbe dpdk driver
Signed-off-by: Girish Nandibasappa <girish.nandibasappa@amd.com>
Acked-by: Ravi Kumar <ravi1.kumar@amd.com>
Add warning and counter to handle the malicious driver detection (MDD)
event.
When the hardware determines that a malicious driver on VF, this VF will
become unworkable, the PF records and gives a warning message.
Signed-off-by: Tao Zhu <taox.zhu@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Because the rte layer of DPDK framework has already processed the case
when the idx is zero before calling the '.mac_addr_remove' ops function,
the input parameter named idx can not be zero in the '.mac_addr_remove'
function. This patch removes unnecessary branch process to check whether
input parameter named idx is zero in the '.mac_addr_remove' ops
implementation function named hns3_remove_mac_addr.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Since the input parameter named dev has been guaranteed not to be NULL
in the rte layer of DPDK framework, it doesn't need to check dev whether
is null in the 'filter_ctrl' ops implementation function named
hns3_dev_filter_ctrl.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch optimizes the Rx performance by using data dependency
ordering to instead of memory barrier which is rte_cio_rmb in the
'.rx_pkt_burst' ops implementation function named hns3_recv_pkts.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
The JUMBO frame handling in dpaa_dev_mtu_set api was not correct.
When frame_size is greater than RTE_ETHER_MAX_LEN, the
intention is to add JUMBO flag in rx offload while it was resetting
all other flags other than JUMBO as AND operator was used instead of OR.
Fixes: 0ebce6129b ("net/dpaa2: support new ethdev offload APIs")
Cc: stable@dpdk.org
Signed-off-by: Apeksha Gupta <apeksha.gupta@nxp.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Use PCI_PRI_FMT instead of "%04d:%02d:%02d:%d" print format.
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Heinrich Kuhn <heinrich.kuhn@netronome.com>
add fill_ip6_head()
hardcode udp destination port to 4500
handle ESP and AH pctypes in ESP-AH profile
update the i40e user guide with ESP information.
update release notes for i40e changes
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add flow structures for the following patterns in i40e_ethdev files:
eth/ipv4/esp
eth/ipv6/esp
eth/ipv4/udp/esp
eth/ipv6/esp/udp
add oip_type in filter
add is_udp in filter
use tenant_id in filter for spi
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add missing arm vector build support to meson.build.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add stubs for ixgbe_xmit_fixed_burst_vec,
ixgbe_rx_queue_release_mbufs_vec and
ixgbe_txq_vec_setup
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Remove weak symbols from ixgbe_rxtx.c file as
it is done in i40e driver in commit "02ad704708"
(net/i40e: eliminate weak symbols in data path)
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
CONFIG_RTE_IXGBE_INC_VECTOR is enabled by default, so remove
it and use architecture specific flags.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Remove the unused definitions, rewrite the IO data read/write helpers,
and put the common definitions related to RTE defines under the macro
__INTEL_NET_BASE_OSDEP__, so it works like OS(RTE) dependency.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Replaces the redefined TRUE and FALSE values with standard ones to
match the 'bool' type definition.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Replaces the redefined TRUE and FALSE values with standard ones to
match the 'bool' type definition.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Hardware limits that max buffer size per Tx descriptor should be
(16K-1)B. So when TSO enabled, the mbuf data size may exceed the
limit and cause malicious behavior to the NIC. This patch fixes
this issue by using more Tx descs for this kind of large buffer.
Fixes: 17c7d0f9d6 ("net/ice: support basic Rx/Tx")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Build error:
In function ‘ixgbe_recv_pkts_lro_bulk_alloc’:
../drivers/net/ixgbe/ixgbe_rxtx.c:2209:24:
error: ‘next_sc_entry’ may be used uninitialized in this function
[-Werror=maybe-uninitialized]
next_sc_entry->fbuf = first_seg;
^
http://mails.dpdk.org/archives/test-report/2020-January/113891.html
This is a compiler false positive and error not seen by newer compilers,
or clang but to fix the warning initializing the complained variable.
According git bisect, no idea how:
Fixes: ad43b7bce9 ("net/ixgbe: avoid multiple definitions of bool")
Reported-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
The doorbell register is mapped using mmap() and offset
must have off_t instead of unsigned int. Bug is not critical
due to only least significant bits of offset are currently
tested to determine mapping mode.
Fixes: 8409a28573 ("net/mlx5: control transmit doorbell register mapping")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch fixes the situation where data path does not work properly
when vhost reconnects to virtio in server mode with packed ring.
Currently, virtio and vhost share memory of vring. For split ring, vhost
can read the status of descriptors directly from the available ring and
the used ring during reconnection. Therefore, the data path can
continue.
But for packed ring, when reconnecting to virtio, vhost cannot get the
status of descriptors via the descriptor ring. By resetting Tx
and Rx queues, the data path can restart from the beginning.
Fixes: 4c3f5822eb ("net/virtio: add packed virtqueue defines")
Cc: stable@dpdk.org
Signed-off-by: Xuan Ding <xuan.ding@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The function vhost_kernel_tap_set_offload() could return errors,
the return value need to be checked. And there is no need to fail
when error is -ENOTSUP.
Fixes: 1db4d2330b ("net/virtio-user: check negotiated features before set")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
This patch supports the feature that the driver passes extra data
(besides identifying the virtqueue) in its device notifications,
expanding the notifications to include the avail index and avail
wrap counter.
Signed-off-by: Cheng Jiang <cheng1.jiang@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Do not close the tap fds when disabling queue pairs, instead,
we just need to unbind the backend. Otherwise, tap port can be
destroyed unexpectedly.
Fixes: e3b434818b ("net/virtio-user: support kernel vhost")
Cc: stable@dpdk.org
Reported-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Add support to the igb vf for the API rte_eth_tx_done_cleanup to force
free consumed buffers on Tx ring.
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add support to the ixgbe driver for the API rte_eth_tx_done_cleanup
to force free consumed buffers on Tx ring.
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Add support to the ice driver for the API rte_eth_tx_done_cleanup
to force free consumed buffers on Tx ring.
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add support to the i40e driver for the API rte_eth_tx_done_cleanup
to force free consumed buffers on Tx ring.
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
octeontx2 PMD does not support both PTP and HIGIG2 together.
Added a check to enforce this and updated the Rx offload capabilities when
Higig2 mode enabled.
Fixes: 602009ee2d ("net/octeontx2: support HIGIG2")
Cc: stable@dpdk.org
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Multi-segs Tx is already supported by CXGBE PMD. So, add the missing
DEV_TX_OFFLOAD_MULTI_SEGS flag to the list of supported Tx offload
features.
Fixes: 436125e641 ("net/cxgbe: update to Rx/Tx offload API")
Cc: stable@dpdk.org
Reported-by: Chas Williams <3chas3@gmail.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Move a macro from a widely included header file to a header file
used only by the one caller of the macro.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
There were defines which originally allowed sharing of some code with
the enic kernel driver. The code has long since diverged and now the
abstraction just makes the code harder to read. Mostly mechanical
replacement of defines and reformatting.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
Use the memzone namesize, Ethernet address length defines from the RTE
header files instead of locally defined versions.
Use the RTE byte swap functions instead of the x86 specific locally
defined versions.
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Hyong Youb Kim <hyonkim@cisco.com>
The control messages do not need NUMA specific allocation.
Numa node is not set anyway in most kernels anyway.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The secondary process would crash trying to get the offload
capability of the device. Since the device capabilities were
already set by the primary process this was unnecessary.
Fixes: 4e9c73e96e ("net/netvsc: add Hyper-V network device")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Avoid using PCI subsystem device id for SoC revision
identification and just use PCI revision id to support C0 silicon.
This patch also reduces SQB threshold to 70% to have
sufficient buffer before we overflow SQ.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
At BGX, DMAC filter table can be enabled to allow defined hosts.
Patch implements 'mac_addr_add' and 'mac_addr_remove' ops to
add/remove MAC filters which uses BGX DMAC filter table.
Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Harman Kalra <hkalra@marvell.com>
Use scalar loads instead of vector loads for fields
that don't need any vector operations.
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Use lightweight transmit handler which handles non-offloaded Tx data
path. We get CPU utilization improvement of ~8%.
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Use light weight receive packet handler for non-LRO and
non-scatter packets to improve CPU utilization in receive data path.
We achieved ~18% CPU cycles improvement using this handler.
Signed-off-by: Shahed Shaikh <shshaikh@marvell.com>
Fix the way in which the number of ports per engine of an adapter is
determined by reading port mode register. Set default value to 1.
Fixes: 3b307c55f2 ("net/qede/base: update FW to 8.40.25.0")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rmody@marvell.com>
Current vector mode implementation floor-aligns pkt count
with NIX_DESCS_PER_LOOP and process that many packets.
Patch addresses the case where pkt count modulo NIX_DESCS_PER_LOOP
is non-zero, after the vector mode processing, scalar routine is
used to process if there are any leftover packets. Scalar routine
is also used when descriptor head is about to wrap and turn out to
be unaligned.
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Currently, reset related operations can only be performed in the primary
process and are not allowed in the slave process in hns3 PMD driver.
In the internal function interface named hns3_cmd_send used for
communication between driver and firmware, if the wrong head value is
detected in the static subfunction hns3_cmd_csq_clean, driver will
trigger a function level reset to make the hardware work normally again.
This patch adds check condition to prevent triggering reset procedure in
the slave process to avoid failure.
Fixes: 2790c64647 ("net/hns3: support device reset")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, the hns3 PMD driver issues command to the firmware and gets
link status information.
When the driver fails to call internal interface function named
hns3_cmd_send to query the status from firmware for some reason, the
link status queried by the driver should be down.
Fixes: 59fad0f321 ("net/hns3: support link update operation")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, when the API interface named rte_eth_dev_get_reg_info is
called by upper applications based on VF device, it returns error.
We can read registers directly to get ring and interrupt related
information in hns3 PF/VF PMD driver. But for some other internal table
entries and common configuration information, we can get them only
through the command interface between driver and firmware in PF driver,
and VF driver has not the related access permission.
This patch fixes it by preventing getting these information through the
command interface based on VF device in 'get_reg' ops implementation
function.
Fixes: 936eda25e8 ("net/hns3: support dump register")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
The format of the ring vector related mailbox commands between driver
and firmware is different from those of other mailbox commands in hns3
network engine.
This patch fixes the error mailbox command format about the vector of
the rings, the related command opcode as below:
HNS3_MBX_MAP_RING_TO_VECTOR
HNS3_MBX_UNMAP_RING_TO_VECTOR
HNS3_MBX_GET_RING_VECTOR_MAP
Fixes: 463e748964 ("net/hns3: support mailbox")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently there is a certain probability of segment error in concurrent
reset when the port is closing.
The calltrace info:
This GDB was configured as "aarch64-redhat-linux-gnu".
Reading symbols from /usr/app/testpmd...(no debugging symbols found)...
done.
[New LWP 98204]
[New LWP 98203]
[New LWP 98206]
[New LWP 98205]
[New LWP 98207]
[New LWP 98208]
Missing separate debuginfo for /root/lib/libnuma.so.1
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib64/libthread_db.so.1".
Core was generated by `/usr/app/testpmd --log-level=6 --socket-mem 16'.
Program terminated with signal 11, Segmentation fault.
Missing separate debuginfos, use:
debuginfo-install glibc-2.17-260.el7.aarch64
(gdb) bt
in hns3vf_service_handler ()
1 0x00000000006988b8 in eal_alarm_callback ()
2 0x00000000006969b4 in eal_intr_thread_main ()
3 0x0000ffffb08d6c48 in start_thread () from /lib64/libpthread.so.0
4 0x0000ffffb0828600 in thread_start () from /lib64/libc.so.6
(gdb)
Reset process may turn on the cancelled link state timer whether the
current port status is on or off, in order to solve this problem, this
patch add judge the current network port state before starting the
timer, only the port in the running state can start the link state
timer, so as to solve the problem that the link state timer accesses the
null pointer and causes the segment error.
Fixes: 2790c64647 ("net/hns3: support device reset")
Cc: stable@dpdk.org
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, there is a certain probability of a type of RAS errors when
receiving broadcast packets. This type of RAS errors are parsed as
rx_q_search_miss error by hns3 PF PMD driver, the related log as below:
0000:bd:00.0 hns3_find_highest_level(): PPP_MFP_ABNORMAL_INT_ST2
rx_q_search_miss found [error status=0x20000000]
When receiving broadcast packet, network engine select which functions
need to accept it according to the function's promisc_bcast_en bit
configuration. And then search TQP_MAP configuration to select which
hardware queues the packet should enter, if can't find the target
hardware queue, network engine will trigger rx_q_search_miss RAS error.
The root cause as below:
1. VF's promisc_bcast_en bit configuration is not cleared by FLR reset,
and the configuration has been set in the previous application.
2. There is one bug in setting TQP_MAP configuration in the
initialization of PF device: when tqp is allocated to VF, it is still
marked as PF. This issue will affect the correctness of the TQP_MAP
configuration.
This patch fixes it with the following modification.
1. Clear all VFs promisc_bcast_en bit in the initialization of PF
device.
2. Fix the issue to ensure the correct TQP_MAP configuration.
Fixes: d51867db65 ("net/hns3: add initialization")
Cc: stable@dpdk.org
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch optimizes the Rx performance by adding the rx_free_thresh
related process in the '.rx_pkt_burst' ops implementation function named
hns3_recv_pkts. The related change as follows:
1. Adding the rx_free_thresh related process to reduce the number of
writing the HNS3_RING_RX_HEAD_REG register.
2. Adjusting the internal macro named DEFAULT_RX_FREE_THRESH to 32 and
adjusting HNS3_MIN_RING_DESC to 64 to make the effect of the thresh
more obvious.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
When receiving a packet, hns3 hardware network engine firstly writes the
packet content to the memory pointed by the 'addr' field of the Rx
Buffer Descriptor, secondly fills the result of parsing the packet
include the valid field into the Rx Buffer Descriptor in one write
operation, and thirdly writes the number of the Buffer Descriptor not
processed by the driver to the HNS3_RING_RX_FBDNUM_REG register.
This patch optimizes the Rx performance by removing one rte_io_rmb call
in the '.rx_pkt_burst' ops implementation function named hns3_recv_pkts.
The change as follows:
1. Driver no longer read HNS3_RING_RX_FBDNUM_REG register, so remove one
rte_io_rmb call, and directly read the valid flag of Rx Buffer
Descriptor to check whether the BD is ready.
2. Delete the non_vld_descs field from the statistic information of the
hns3 driver because now it has become a common case that the valid
flag of Rx Buffer Descriptor read by the driver is invalid.
Signed-off-by: Chengwen Feng <fengchengwen@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch reduces the number of the judgement of the free Tx ring space
in the 'tx_pkt_burst' ops implementation function to avoid performance
loss. According to hardware constraints, we need to reserve a Tx Buffer
Descriptor in the TX ring in hns3 network engine.
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, we only support VF device is bound to vfio_pci or igb_uio and
then driven by DPDK driver when PF is driven by kernel mode hns3 ethdev
driver, VF is not supported when PF is driven by hns3 DPDK driver.
This patch adds support setting VF MAC address by hns3 PF kernel ethdev
driver on the host by "ip link set ..." command.
1) If the hns3 PF kernel ethdev driver sets the MAC address for VF
device before the initialization of the related VF device, hns3 VF
PMD driver should get the MAC address from PF driver through mailbox
and configure hardware using this MAC address in the initialization.
The hns3 VF PMD driver get the MAC address form PF driver, if
obtaining a non-zero MAC address from mailbox, VF driver will
configure hardware using it, otherwise using a random MAC address in
the initialization of VF device.
2) If the hns3 PF kernel ethdev driver sets the MAC address for VF
device after the initialization of the related VF device, the PF
driver will notify VF driver to reset VF device to make the new MAC
address effective immediately. The hns3 VF PMD driver should check
whether the MAC address has been changed by the PF kernel netdevice
driver, if changed VF driver should configure hardware using the new
MAC address in the recovering hardware configuration stage of the
reset process.
3) When user has configured a mac address for VF device by "ip link set
..." command based on the PF device, the hns3 PF kernel ethdev driver
does not allow VF driver to request reconfiguring a different default
mac address and return -EPREM to VF driver through mailbox.
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Hardware does not support individually enable/disable/reset the Tx or Rx
queue in hns3 network engine, driver must enable/disable/reset Tx and Rx
queues at the same time.
Currently, hns3 PMD driver does not support the scenarios as below:
1) When calling the following function, the input parameter nb_rx_q and
nb_tx_q are not equal.
rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q,
uint16_t nb_tx_q,
const struct rte_eth_conf *dev_conf);
2) When calling the following functions to setup queues, the
cumulatively setup Rx queues are not the same as the setup Tx queues.
rte_eth_rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id,,,);
rte_eth_tx_queue_setup(uint16_t port_id, uint16_t tx_queue_id,,,);
However, these are common usage scenarios in some applications, such as,
l3fwd, ip_ressmbly and OVS-DPDK, etc.
This patch adds support for this usage of these functions by setup fake
Tx or Rx queues to adjust numbers of Tx/Rx queues. But these fake queues
are imperceptible, and can not be used by upper applications.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Adding FDIR support for L2TPv3 over IP header matching and adding
a new customized pctype for l2tpv3 over IP.
Signed-off-by: Rory Sexton <rory.sexton@intel.com>
Signed-off-by: Dariusz Jagus <dariuszx.jagus@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The ring is used only by af_xdp PMD itself, so no need to support
multi-producer and multi-consumer mode. This patch changes the ring
to single-producer and single-consumer mode, which could yield better
performance for addr enqueue and dequeue.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Tested-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
The tx_burst routine supporting multi-segment packets with
legacy MPW and without inline was missed, and there was no
valid selection for these options, patch adds the missing
routine.
Fixes: 82e75f8323 ("net/mlx5: fix legacy multi-packet Tx descriptors")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Use the API rte_ether_addr_copy to do MAC assignment, instead of
calling rte_memcpy function directly.
Fixes: 84dc7a95a2 ("net/ice: enable flow director engine")
Cc: stable@dpdk.org
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Change the iavf base code as driver common library, it is used by iavf
PMD now, and it can be used by other Intel SR-IOV PMDs in the future.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch fixes 'NIC Link is Up, Unknown bps' message in dmesg
for 2.5Gb/5Gb speeds. This problem is fixed by adding constants
for VIRTCHNL_LINK_SPEED_2_5GB and VIRTCHNL_LINK_SPEED_5GB.
Fixes: a58860f689 ("net/i40e/base: use new virtchnl header file")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add X710T*L device specific operations (in port LED detection and
handling of GLGEN_GPIO_CTL.PIN_FUNC field) to enable LED blinking.
Signed-off-by: Damian Milosek <damian.milosek@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Some VFs may want to disable CRC stripping on incoming packets
so create an offload for that. The VF already sends information
about configuring it's RX queues so use that structure to
indicate that the CRC stripping should be enabled or not.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Introduce offsets of firmware registers holding a number of EMP resets.
Implement offsets as a preprocessor's constants.
Required by drivers to read a number of EMP resets reported by FW.
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The previous code had the LED code wrapped such that, it was
static to the file and not usable outside of it. It is now available.
Signed-off-by: Mateusz Rusinski <mateusz.rusinski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
There was no time duration statistics for LPI (Low Power Idle)
in EEE (Energy-Efficient Ethernet).
Added new procedure to get duration values from FW.
Otherwise there is no available procedure to get tx_lpi_duration
and rx_lpi_duration values.
Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The X722 FW API version 1.9 adds support for accessing PHY
registers with Admin Queue Command. This enables reading
EEPROM data from (Q)SFP+ transceivers, what was previously
possible only on X710 devices.
Signed-off-by: Adam Ludkiewicz <adam.ludkiewicz@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The result of the check is always FALSE and the code within "if"
is never executed.
Signed-off-by: Dzmitry Sautsa <dzmitryx.sautsa@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add defines for creating Flow Director flows as defined in datasheet
section 7.1.5.4 for field vectors.
Signed-off-by: Doug Dziggel <douglas.a.dziggel@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Fix display of FEC settings for ethtool.
This patch change variable 'phy.link_info.req_fec_info' sent to ethtool.
Without this patch wrong FEC settings can be shown.
Fixes: 1216fb9f0c ("net/i40e/base: store the requested FEC information")
Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Mark bits 0xD through 0xF for the command flags of a cloud filter as
reserved. These bits are not yet defined and are considered as reserved
in the data sheet.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Fixed a bug where driver was breaking out of the loop and
reporting an error without retrying first.
Fixes: 466eec7d6b ("net/i40e/base: retry AQC to overcome IRCRead hangs")
Signed-off-by: Marcin Formela <marcin.formela@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Make i40e_set_mac_type() public. i40e driver requires
i40e_set_mac_type() to be public. It is required for recovery mode
handling. Without this patch recovery mode could not be detected at
probe() function.
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch adds a function to read NVM module data and uses it to
read current LLDP agent configuration from NVM API version 1.8.
Signed-off-by: Sylwia Wnuczko <sylwia.wnuczko@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Update FW API version to 1.9.
Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Function check_recovery_mode had wrong if statement. Now we check proper
FWS1B register values, which are responsible for the recovery mode.
Recovery mode has 6 values in total. That's why we need 6 different
flags. Now in if statement we recognize type of mac and register value.
Without those changes driver could show wrong state.
Signed-off-by: Adrian Podlawski <adrian.podlawski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch adds "drop mode" parameter to set mac config AQ command.
This bit controls the behavior when a no-drop packet is blocking a TC
queue.
0 – The PF driver is notified.
1 – The blocking packet is dropped and then the PF driver is notified.
Signed-off-by: Sylwia Wnuczko <sylwia.wnuczko@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Currently FW use MDIO I/F number corresponded with current PF for PHY
access. This code allow to specify used MDIO I/F number.
Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The existing driver allows setting the number of TX descriptors
to the value that is indivisible by 32. This is not properly
supported by x710 hardware. The patch limits the number of TX
descriptors to the whole value of 32.
Fixes: 8db9e2a1b2 ("i40e: base driver")
Cc: stable@dpdk.org
Signed-off-by: Doug Dziggel <douglas.a.dziggel@intel.com>
Signed-off-by: Dariusz Chaberski <dariuszx.chaberski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add a few new status codes and rename a few to make them more
consistent. Error code are mapped to similar values as in
i40e_status.h, so as to be compatible with older VF drivers not using
this status enum.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The upstream virtchnl.h has a few minor style differences to what is
out-of-tree, and there is no real reason we should prefer the current
style over whats upstream.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This change introduces new function i40e_get_lpi_counters() reading
Low Power Idle (LPI) mode counters from Energy Efficient Ethernet (EEE)
statistics. Since reading EEE statistics requires running DNL script,
function i40e_aq_run_phy_activity() able to run it, was implemented.
i40e_lpi_stat_update() was introduced as helper function for retrieving
LPI counters' values relative to given offsets.
This change also fixes order of fields in struct
i40e_aqc_run_phy_activity and introduces union in the struct
providing more descriptive names of fields depending on usage
(command or response).
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Fix for missing "Supported link modes" and "Advertised link modes"
info in ethtool after changed speed on X722 devices with BASE-T PHY
with FW API version >= 1.7.
The same FW API version on X710 and X722 does not mean the same
feature set so the change was needed as mac type of the device
should also be checked instead of FW API version only.
Fixes: e8228f1a16 ("net/i40e/base: report supported link modes")
Signed-off-by: Martyna Szapar <martyna.szapar@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
When external PHY is used, MAC register may not reflect actual
state of LPI. Add function reading it directly from PHY or MAC,
depending on what is supported by the device.
Signed-off-by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This change adds i40e_enable_eee() function controlling advertisement
of Energy Efficient Ethernet mode (EEE).
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This change introduces i40e_get_fw_lldp_status() function capable of
reporting status of FW Link Layer Discovery Protocol (LLDP) agent.
Since reading LLDP configuration from NVM only gives information what
is the default state of FW LLDP agent after POR, this change introduces
more reliable method for checking if agent is enabled.
Current state of FW LLDP agent may be different if user disabled the
agent, so i40e_get_fw_lldp_status() uses LLDP MIB checking to determine
status of the agent.
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch makes it possible to log only AQ descriptors, without the
entire AQ message buffers being dumped too. It should greatly reduce
kernel log size in cases where a full AQ dump is not needed.
Selection is made by setting flags in hw->debug_mask.
Additionally, some debug messages that preceded an AQ dump have been
moved to I40E_DEBUG_AQ_COMMAND class, which seems more appropriate.
Signed-off-by: Doug Dziggel <douglas.a.dziggel@intel.com>
Signed-off-by: Robert Konklewski <robertx.konklewski@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Adding bit flags to enable/disable EEE capability for 2.5GBase-T and
5GBase-T PHY types as well as 'Set autonomous EEE for relevant enabled
PHY types' flag.
Signed-off-by: Doug Dziggel <douglas.a.dziggel@intel.com>
Signed-off-by: Michal Litwicki <michalx.litwicki@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Some features were introduced in different FW API version on XL710 and
X722 MACs. Others are available only on specific MAC type. Make sure
that they are properly assigned. Also fix the style issues reported by
current check-patch.
Signed-off-by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
New device ids are created to support SFP+ and backplane connections.
Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This code implements changes necessary for LLDP Agent support.
1. Modified i40e_aq_start_lldp and i40e_aq_stop_lldp. Now Stop and Start
can also be persistent across power cycles.
2. Added new function i40e_aq_restore_lldp which restores factory
setting for LLDP Agent or gets its status.
Signed-off-by: Jaroslaw Ilgiewicz <jaroslaw.ilgiewicz@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch changes an error code for an admin queue head overrun to use
I40E_ERR_ADMIN_QUEUE_FULL instead of I40E_ERR_QUEUE_EMPTY.
Fixes: 8db9e2a1b2 ("i40e: base driver")
Cc: stable@dpdk.org
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
There is a need to enable MIB change event, not at the same time as
init_dcb. This patch will serve this requirement.
Modify the i40e_init_dcb to return the correct error when LLDP or DCBX
is not in operational state.
Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The high 32-bits were being set incorrectly in the 'Set Local LLDP MIB'
AQ command (0x0A08). Change it to use the right macro to get the correct
bits.
Fixes: 1fa6324ad3 ("i40e/base: add new interfaces")
Cc: stable@dpdk.org
Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
For historical reasons, we allowed 3 VSIs per VF, but never used more
than one. Now with ADq, we can use up to 4 VSIs per VF, so change this
value to match.
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Extend NVM Update API to support reporting of features
available for the tools.
This change is needed by NVM Update to determine if driver
supports changing NVM layout from structured to flat.
Signed-off-by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Signed-off-by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Signed-off-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Setting up supported ptypes using testpmd command is failing
because supported_ptypes_get callback will never return ptypes
supported, as NIX_RX_OFFLOAD_PTYPE_F bit in rx_offload_flags
is zero by default in testpmd.
Fixes: d2706e15e6 ("net/octeontx2: support reduced set of packet types")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Replace 'typedef int bool' with 'stdbool.h' to avoid possible
multiple definitions of 'bool'.
(Not sure if the previous code is checking for true/false condition.
Recommend careful review on this patch.)
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Replace 'typedef int bool' with 'stdbool.h' to avoid possible
multiple definitions of 'bool'.
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Replace 'typedef int bool' with 'stdbool.h' to avoid possible
multiple definitions of 'bool'.
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Replace 'typedef int bool' with 'stdbool.h' to avoid possible
multiple definitions of 'bool'.
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Replace 'typedef int bool' with 'stdbool.h' to avoid possible
multiple definitions of 'bool'.
Remove 'typedef char Bool' and use 'bool' instead.
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Yong Wang <yongwang@vmware.com>
Replace 'typedef int bool' with 'stdbool.h' to avoid possible
multiple definitions of 'bool'.
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Compilation issue arises due to multiple definitions of 'bool'
in 'ixgbe_ethdev.h'.
Error:
'/dpdk/drivers/net/ixgbe/ixgbe_ethdev.c: In function
‘ixgbe_dev_setup_link_alarm_handler’:
/dpdk/drivers/net/ixgbe/ixgbe_ethdev.c:4075:43:
error: passing argument 3 of ‘ixgbe_get_link_capabilities’ from
incompatible pointer type [-Werror=incompatible-pointer-types]
ixgbe_get_link_capabilities(hw, &speed, &autoneg);
^
In file included from /dpdk/drivers/net/ixgbe/ixgbe_ethdev.c:41:0:
/dpdk/drivers/net/ixgbe/base/ixgbe_api.h:63:5: note: expected
‘bool * {aka int *}’ but argument is of type ‘_Bool *’'
Signed-off-by: Dharmik Thakkar <dharmik.thakkar@arm.com>
Reviewed-by: Phil Yang <phil.yang@arm.com>
Reviewed-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Use scalar loads instead of vector loads for fields
that don't need any vector operations.
Signed-off-by: Andrew Pinski <apinski@marvell.com>
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Returning -ENOTSUP only in case loopback mode is enabled and
device is VF or SDP.
Fixes: c2c0aa75cd ("net/octeontx2: fix loopback config return for VF")
Cc: stable@dpdk.org
Signed-off-by: Harman Kalra <hkalra@marvell.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
Valgrind complains that virtio_user is calling close(-1).
Fix this by adding check in virtio that is similar to existing code.
Fixes: 37a7eb2ae8 ("net/virtio-user: add device emulation layer")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
The function eth_dev_vhost_create() could return errors,
the return value need to be checked.
Fixes: ee584e9710 ("vhost: add driver on top of the library")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Function kick_tx() has built-in detection on NEED_WAKEUP flag, so just
call it directly, like elsewhere in the driver.
Fixes: d8a210774e ("net/af_xdp: support unaligned umem chunks")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Tested-by: Ciara Loftus <ciara.loftus@intel.com>
Implements eth dev ops xstats_get, xstats_reset, xstats_get_names,
xstats_get_names_by_id, xstats_get_by_id
Signed-off-by: Chandu Babu N <chandu@amd.com>
Acked-by: Ravi Kumar <ravi1.kumar@amd.com>
Allow the data in the first buffer to be shifted by `pkt_offset` after
the header room. The offset value is provided by `ena_rx_ctx`.
As part of this update, the version of the ENA was upgraded to v2.0.3.
Signed-off-by: Maciej Bielski <mba@semihalf.com>
Acked-by: Michal Krawczyk <mk@semihalf.com>
This version of the HAL allows to use the latest HW features, like
rx offsets.
Driver was adjusted to the new version to fix the build.
Signed-off-by: Michal Krawczyk <mk@semihalf.com>
Signed-off-by: Maciej Bielski <mba@semihalf.com>
Add support for 1/10G devices.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
ice_add_mac_rule allow user to add rule to port based on
hw->port_info->lport number. Function in some case should
allow user to add filter rule on different port, write
another function which implemented that behaviour.
The same situation is which removing mac function.
Add new API function which allow user to choose port on which
rule going to be added. Leave add mac rule function that always
add rule on hw->port_info->lport to avoid changes in components
which don't need to choose different port. Also add function to
remove rule from specific port.
Alloc more switch_info structs to track separately rules for each
port. Choose switch_info struct basing on logic port number
because in FW added rules are connected with port.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Change internal implementation of how FD filter programming desc
is prepared. This is to minimize the amount of code needed to prep
the FD filter programming desc (avoid memcpy, etc...) and just use
predefined shifts and mask. This type of change are needed to expedite
FD setup during data path (ADQ uses this codepath during initial
flow setup) and it will also be useful when adding side-band
flow-director filter.
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Increase the maximum time that the driver will wait for a PF reset
from 200 milliseconds to 300 milliseconds, to account for possibility
of a slightly longer than expected PF reset.
Fixes: 453d087cca ("net/ice/base: add common functions")
Cc: stable@dpdk.org
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
In ice_prot_type_to_id routine, correct the loop limit check
to use ARRAY_SIZE instead of looking for the array element to
have a specific value.
Fixes: fed0c5ca5f ("net/ice/base: support programming a new switch recipe")
Cc: stable@dpdk.org
Signed-off-by: Dan Nowlin <dan.nowlin@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Enable the code to clear the HW tables.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Change the extraction sequence generated by flow director flexbytes to
use package mac protocol. Without this change data in packet headers
cannot be used for flexbyte matching. The old extraction for flex bytes
started at the beginning of the payload which is after the header.
Signed-off-by: Henry Tieman <henry.w.tieman@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Use a format consistent with the rest of the code.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
When RDMA is not enabled, when checking for completion of a CORER or
GLOBR do not wait for the PE unit to be loaded (indicated by GLNVM_ULD
register's PE_DONE bit being set) since that does not happen and will
cause issues such as failing to initialize the device.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add a feature to allow user to add switch filter using input like
MAC + VLAN (C-tag only) + L4 (TCP/UDP) port. API "ice_add_adv_rule"
is extended to handle this filter type.
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Allow tools to access register offset 0xB8188 (GLGEN_RSTAT) for
NVMUpdate operations. This is a read-only register, so risk of other
issues stemming from this change is low. Even so, update the write
command to prevent and reject any commands which attempt to write to
this register, just like we do for GL_HICR_EN.
Signed-off-by: Jeb Cramer <jeb.j.cramer@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
This patch removed some unused macros defined in hns3_rss.h,
these macros are used to set tuples for abandoned RTE_ETH_FILTER_HASH
in hns3_dev_filter_ctrl().
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch removes the unnecessary assignment in the '.tx_pkt_burst' ops
implementation function to avoid performance loss.
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
This patch removes the redundant initialization of the variable
named ret.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch removes the redundant statement calling hns3_stats_reset()
to clear statistical information explicitly in the initialization of
VF device, because hardware has been reset by FLR in the initialization
and the initial hardware and software statistics values are 0.
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch changed the default algorithm of RSS from simle_xor to
toeplitz because toeplitz is used more frequently by upper applications
such as ceph.
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
This patch replaces custom macro named HNS3_MIN_FRAME_LEN for ethernet
minimum frame length with the macro named RTE_ETHER_MIN_LEN that defined
in DPDK framework.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Currently, firmware adds the function of sending message to PF driver
through mailbox when the link status is changed, hns3 PMD driver can
usually recognize link state change faster through the message.
And in some extreme cases, this way is not faster than existing method
regularly updating link status by issuing the command every second in PF
driver, because of the parallel processing of mailbox and command
messages in firmware. So we reserve updating link status using timers in
PF driver, and add querying link status by issuing command to the
firmware in '.link_update' ops implementation function named
hns3_dev_link_update to solve the out of date link status.
Signed-off-by: Hongbo Zheng <zhenghongbo3@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
Signed-off-by: Huisong Li <lihuisong@huawei.com>
This patch adds supports of receive packets through interrupt mode for
hns3 PF/VF driver. The following ops functions should be implemented
defined in the struct eth_dev_ops:
rx_queue_intr_enable
rx_queue_intr_disable
Signed-off-by: Hao Chen <chenhao164@huawei.com>
Signed-off-by: Wei Hu (Xavier) <xavier.huwei@huawei.com>
When offloading the meter, should check the action
conf and make sure it is valid.
Fixes: f46bf74887 ("net/mlx5: support meter flow action")
Cc: stable@dpdk.org
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Suanming Mou <suanmingm@mellanox.com>
In some cases when flow creation fails, we overwrite the specific
error message with a generic error message. This patch fixes it.
Fixes: d24610f7bf ("net/bnxt: allow flow creation when RSS is enabled")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
Add support for RTE_FLOW_ACTION_TYPE_MARK.
Use the flow_id provided by FW during flow creation to lookup the
mark id provided by the application.
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Lance Richardson <lance.richardson@broadcom.com>
The software L2 filter was being released back to the free pool,
though it was created in HW and the filter corresponding to an actual
'flow' would have reference to the HW L2 filter.
But if this 'flow were to be deleted, then this HW L2 filter also
would be gone.
Fix this by storing the L2 filter created originally either for an
n-tuple flow or otherwise as part of the vnic's filter list.
This would require the filter_info struct to have a backptr to the
vnic which it came from.
Now that L2 filters can be re-used for an n-tuple filter(s), delete
L2 filter as well so the reference count of an L2 filter (if reused)
can be decremented appropriately.
Fixes: 5c1171c972 ("net/bnxt: refactor filter/flow")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
As part of ntuple filter, we were creating L2 filter with the ntuple
redirect queue resulting in any L2 matching flow getting steered to
this queue. For ntuple filters, we need to create the L2 filter with
default queue. The user specified redirect queue will be set while
creating the ntuple filter in hardware.
Fixes: 5c1171c972 ("net/bnxt: refactor filter/flow")
Cc: stable@dpdk.org
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Sync flow flush routine with flow destroy so that the operations
performed per flow during a flush are the same as that are done for an
individual flow destroy by having a common function to call for both.
One of the things that was missed in the flow flush routine was the
deletion of the L2 filter that would have been created as part of an
n-tuple filter.
Also, decrement the l2_ref_cnt for a filter in the case of a filter
update as it would've bumped up previously in validate_and_parse_flow()
Fixes: 89278c59d9 ("net/bnxt: fix flow flush handling")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
In the case when CoS classification is disabled, driver was iterating
looking for only lossy profiles as that is what is expected to be used
for regular NIC operations. But in certain custom profiles, there were
no lossy profiles configured, only lossless profiles instead.
To handle such cases, it is better to fallback to using the first valid
profile.
Fixes: 698aa7e953 ("net/bnxt: add code to determine the Tx COS queue")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
We need to wait for up to 500ms to receive async event notification
after forcing link down. Similarly we need to wait for up to 10s for
link to come up after configuring the hardware for link up.
Fixes: c09f57b49c ("net/bnxt: add start/stop/link update operations")
Cc: stable@dpdk.org
Signed-off-by: Santoshkumar Karanappa Rastapur <santosh.rastapur@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Setting exact link speed makes sense if auto-negotiation is
disabled. Fixed flag is required to disable auto-negotiation.
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Ting Xu <ting.xu@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Setting exact link speed makes sense if auto-negotiation is
disabled. Fixed flag is required to disable auto-negotiation.
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Ting Xu <ting.xu@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Hardware limits that max buffer size per tx descriptor should be
(16K-1)B. So when TSO enabled, the mbuf data size may exceed the
limit and cause malicious behavior to the NIC. This patch fixes
this issue by using more tx descs for this kind of large buffer.
Fixes: 4861cde461 ("i40e: new poll mode driver")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Tested-by: Ciara Loftus <ciara.loftus@intel.com>
In iavf_handle_virtchnl_msg(), it is not appropriate for _clear_cmd()
to be used as a notification to foreground thread. So introduce
_notify_cmd() to fix this error. In addition, since _notify_cmd()
contains rte_wmb(), rte_compiler_barrier() is not necessary.
Sending msg from VF to PF is mainly by calling iavf_execute_vf_cmd(),
the whole virtchnl msg process is like,
iavf_execute_vf_cmd() will call iavf_aq_send_msg_to_pf() to send
msg and then polling the cmd done flag as "if (vf->pend_cmd ==
VIRTCHNL_OP_UNKNOWN)"
When reply msg is returned by pf, iavf_handle_virtchnl_msg() in
isr will read msg return value by "vf->cmd_retval = msg_ret" and
immediately set the cmd done flag by calling _clear_cmd() to
notify the iavf_execute_vf_cmd().
iavf_execute_vf_cmd() find the cmd done flag is set and then
check whether command return value vf->cmd_retval is success or
not.
However _clear_cmd() also resets the vf->cmd_retval to success,
overwriting the actual return value which is used for diagnosis.
So iavf_execute_vf_cmd() will always find vf->cmd_retval is
success and then return success.
Fixes: 22b123a36d ("net/avf: initialize PMD")
Cc: stable@dpdk.org
Signed-off-by: Yahui Cao <yahui.cao@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
To read line side statistics register, eth_group_sel
args in function ipn3ke_indirect_mac_read should be 0.
When eth_group_sel is 1, the nic side register is read.
Fixes: 5a6d883878 ("net/ipn3ke: implement statistics")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
There'll always be a MDD event triggered when adding
a FDIR rule. The root cause is 'LAN enable' is not
configured during control VSI setup.
Besides, correct FDIR fields for both main VSI and
control VSI.
Fixes: 84dc7a95a2 ("net/ice: enable flow director engine")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Move device state flag from ice_hw to ice_adapter since it should
not be a part of base code.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
When send a adminq, if get IAVF_AQ_RC_BUSY, we should return
IAVF_ERR_NOT_READY.
Fixes: e5b2a9e957 ("net/avf/base: add base code for avf PMD")
Cc: stable@dpdk.org
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Update copyright date to cover 2019.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add 2.5G and 5G link speed support.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Update FW API version from 1.5 to 1.6 for X722
Also added NVM update related APIs.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Allocated resources were not freed in the event of failure in
iavf_init_asq function. This patch gracefully handles all failures.
Fixes: e5b2a9e957 ("net/avf/base: add base code for avf PMD")
Cc: stable@dpdk.org
Signed-off-by: Pandi Kumar Maharajan <pandi.maharajan@intel.com>
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Change max VSI per VF from 3 to 4.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Adjust the indent in function and macro definition.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Update virtual channel API to align with latest spec.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Rename iavf_parse_hw_config to iavf_vf_parse_hw_config.
Rename iavf_reset to iavf_vf_reset.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Remove compile option INTEGRATED_VF.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Remove unused APIs in iavf_prototype.h, iavf_adminq_cmd.h
iavf_type.h, iavf_adminq.h and iavf_common.c
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Add all supported device id.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Rename all register macro to align with kernel driver's implementation.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Rename iavf_status_code to iavf_status to align with kernel
driver's implementation.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Delete iavf_hmc.h and iavf_lan_hmc.h since its not necessary.
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Qiming Yang <qiming.yang@intel.com>
Ixgbe PMD PF host code needs to support ixgbevf MAC address
add and remove. For this purpose, a response was added
between PF and VF to update the MAC address.
Signed-off-by: Guinan Sun <guinanx.sun@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Current implementation is that only one Rx queue can support interrupt,
because all queues are mapped in the same vector id in
vfio_enable_msix(). So VF can not support multi-queue Rx interrupt in
the interrupt mode.
In this patch, if the packet I/O interrupt on datapath is enabled
(rte_intr_dp_is_en(intr_handle) is true), we map different interrupt
vectors to each queue and send this map to PF. After PF sets the map to
the register, all Rx queue interrupts will be received.
In addition, vector id should less than the maximum vector value. When
queue number is more than vector value, we set up a loop of interrupt
vectors map.
Signed-off-by: Lunyuan Cui <lunyuanx.cui@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
On validation of GENEVE item, the wrong flag is used.
This patch sets the correct bit in item_flags bitmap.
Fixes: e59a5dbcfd ("net/mlx5: add flow match on GENEVE item")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
This patch implements the feature described in RFC [1], adding
support of RSS action on L3 and/or L4 source or destination only.
[1] http://mails.dpdk.org/archives/dev/2019-December/152796.html
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Rx hash fields were copied from input parameter into TIR attributes
directly, with no translation. As result the copied value was wrong.
This patch adds translation of value from input bitmap to the
appropriate format.
Fixes: dc9ceff73c ("net/mlx5: create advanced RxQ via DevX")
Cc: stable@dpdk.org
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Maximal size of coalesced LRO segment is set in TIR attributes as
number of chunks of size 256 bytes each.
Current implementation uses the hardcoded value 256 in several places.
This patch adds a definition for this value, and uses this definition
in all relevant places.
A debug message is added to clearly notify the actual configured size.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Bit-masks MLX5_FLOW_LAYER_IPV4_LRO and MLX5_FLOW_LAYER_IPV6_LRO were
added during work on LRO.
They are not used anywhere in current code.
This patch removes these redundant definitions.
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The purpose of this patch is used to add a new field "fw_cap"
in bnxt structure. The new "fw_cap" field store all the capabilities
reported by the FW. This information will help us to determine
the device capabilities when registering feature support with FW.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Fix bnxt_free_filter() to ensure that the filter indices
are reset correctly when a filter is freed.
This change helps in avoiding few duplicate code as well.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Remove "__rte_unused" instances that are not required.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Rahul Gupta <rahul.gupta@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
During the registration process, the drivers must publish
"HOT_RESET_SUPPORTED" capability to the core firmware only
if core firmware is capable of Hot Reset.
Fixes: df6cd7c1f7 ("net/bnxt: handle reset notify async event from FW")
Cc: stable@dpdk.org
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Older Firmware could have state information such as
MAC Filters, VLAN settings etc configured by user.
But new Firmware is unaware of this state information
and as a result driver should restore these settings
during reset recovery.
This patch restores the user configured vlan settings
prior to hot FW upgrade or FW error.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Older Firmware could have state information such as
MAC Filters, VLAN settings etc configured by user.
But new Firmware is unaware of this state information
and as a result driver should restore these settings
during reset recovery.
This patch restores the user configured mac addresses
prior to hot FW upgrade or FW error.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
The eth devices which share one ibv device only need one hash list of
flow table.
Currently, flow table hash list is created per each eth device
whatever whether they share one ibv device or not.
If the devices share one ibv device, the previously created hash list
will become dangle because the pointer point to (sh->flow_tbls) is
overwritten by the later created hast list.
To fix this, just don't create hash list if it is already created.
Fixes: 54534725d2 ("net/mlx5: fix flow table hash list conversion")
Cc: stable@dpdk.org
Reported-by: Zhike Wang <wangzhike@jd.com>
Signed-off-by: Xiaoyu Min <jackmin@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The type of txq has been assigned in mlx5_txq_hairpin_new.
Fixes: ae18a1ae96 ("net/mlx5: support Tx hairpin queues")
Cc: stable@dpdk.org
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Ori Kam <orika@mellanox.com>
If configuring the number of tx/rx queue with rte_eth_dev_configure
to nr_queues + hairpin_nr_queues, and setting tx/rx queues to
nr_queues with rte_eth_tx/rx_queue_setup. But not configuring the
hairpin queues via rte_eth_tx/rx_hairpin_queue_setup.
When starting the netdev, there is a crash because of NULL accessing.
Fixes: cf5516696d ("ethdev: add hairpin queue")
Cc: stable@dpdk.org
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Acked-by: Ori Kam <orika@mellanox.com>
During a kernel PF reset, this event is propagated to the VF.
The DPDK VF PMD will execute the reset task before the PF is done
with his. This results in the admin queue message not being responded
to leaving the port in "promiscuous" mode.
This patch makes sure the promiscuous mode is configured independently
of the current admin state.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Xiao Zhang <xiao.zhang@intel.com>
In FreeBSD environment, nic_uio drivers do not support interrupts,
rte_intr_callback_register() will fail to register interrupts.
We cannot make link status to change from down to up by interrupt
callback. So we need to wait for the controller to acquire link
when ports start. Through multiple tests, 5s should be enough.
Fixes: b9bd0f09fa ("ethdev: fix link status query")
Cc: stable@dpdk.org
Signed-off-by: Lunyuan Cui <lunyuanx.cui@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The link status for ixgbevf is not correct when PF link up.
IXGBE_ESDP register is only used when media type is fiber.
Fixes: 1ca05831b9 ("net/ixgbe: fix link status")
Cc: stable@dpdk.org
Signed-off-by: Lunyuan Cui <lunyuanx.cui@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
FreeBSD OS doesn't support igb_uio interrupt, so it will fail when
unregister the interrupt callback in port close. We can fix the issue by
passing -ENOENT when check the return value of unregister interrupt
callback function.
Fixes: ac89d46096 ("net/i40e: release port upon close")
Cc: stable@dpdk.org
Signed-off-by: Chenxu Di <chenxux.di@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
Rx total stats is the total number of successfully received packets,
so exclude the number of rx_discards for Rx total stats.
Fixes: f4a41a6953 ("net/avf: support stats")
Cc: stable@dpdk.org
Signed-off-by: Jiaqi Min <jiaqix.min@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
The ipn3ke driver and the ifpga driver had circular dependencies on each
other, meaning that neither could be built with meson. Fix this by:
* setting the build order of net and raw to match that in makefiles
* removing the dependency from the net driver on the rawdev one
* fixing the dependency names in the rawdev driver meson.build file
Fixes: 8418c92811 ("net/ipn3ke: remove configuration for i40e port bonding")
Fixes: e1defba4cf ("raw/ifpga/base: support device tree")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
According to comms package, index 94 should be MAC_IPV6_ICMP,
not MAC_IPV4_ICMP. This patch fixes the issue.
Fixes: 4cf29798b4 ("net/ice: fix packet type table")
Cc: stable@dpdk.org
Signed-off-by: Shougang Wang <shougangx.wang@intel.com>
Acked-by: Xiaolong Ye <xiaolong.ye@intel.com>
In order to change RSS parameters, the host requires that RSS
is disable first.
Fixes: 92d23a57ca ("net/netvsc: support configuring RSS parameters")
Cc: stable@dpdk.org
Signed-off-by: Donald Lee <donald_lee@trendmicro.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Tested-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Abhishek Marathe <abmarath@microsoft.com>
The change to add OFFLOAD_RSS_HASH broke use of netvsc PMD
with testpmd. The netvsc driver fails during configure step:
Configuring Port 1 (socket 0)
hn_dev_configure(): unsupported RX offload: 0x80000
Fixes: 5d30897295 ("ethdev: add mbuf RSS update as an offload")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
The VLAN field in the descriptor is not filled when ol_flags has
no VLAN flag. When the caller sends some packets with VLAN tags,
but other packets do not have VLAN tags, the behavior of the program
cannot be determined.
Fixes: 4b61d3bfa9 ("fm10k: add receive and tranmit")
Cc: stable@dpdk.org
Signed-off-by: Lu Qiuwen <luqiuwen@iie.ac.cn>
Acked-by: Xiao Wang <xiao.w.wang@intel.com>
Previously large packet would be dropped, instead now it is better to
keep it via truncating it.
Signed-off-by: Zhike Wang <wangzhike@jd.com>
Reviewed-by: Cian Ferriter <cian.ferriter@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
BNXT_GET_DEFAULT_VNIC macro returns the default VNIC of the
function and fixed all occurrences of code to use the macro.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Remove an unnecessary log while deleting EM filters.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Use switch-case statement to replace if-else statement.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Use the new API to wait in low power state instead of continuous
polling to save CPU cycles and power.
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
Acked-by: Jerin Jacob <jerinj@marvell.com>
A new vDPA class was recently introduced.
IFC driver implements the vDPA operations,
hence it should be moved to the vDPA class.
Move it.
Signed-off-by: Matan Azrad <matan@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This rewrites the MKSTR macro appending an empty string to its arguments
to resolve build failures similar to:
drivers/net/mlx4/mlx4.c:461:14: fatal error: format string is not a
string literal [-Wformat-nonliteral]
MKSTR(path, "%s/device/uevent", device->ibdev_path);
drivers/net/mlx4/mlx4_utils.h:82:30: note: expanded from macro 'MKSTR'
char name[snprintf(NULL, 0, __VA_ARGS__) + 1]; \
drivers/net/mlx5/mlx5_stats.c:144:15: fatal error: format string is not a
string literal [-Wformat-nonliteral]
MKSTR(path, "%s/ports/%d/hw_counters/%s",
drivers/net/mlx5/mlx5_utils.h:149:30: note: expanded from macro 'MKSTR'
char name[snprintf(NULL, 0, __VA_ARGS__) + 1]; \
The errors reproduce with clang version 9.0.0, and the release notes
don't mention what could have caused them.
Fixes: 7fae69eeff ("mlx4: new poll mode driver")
Fixes: 771fa900b7 ("mlx5: introduce new driver for Mellanox ConnectX-4 adapters")
Cc: stable@dpdk.org
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Signed-off-by: Matan Azrad <matan@mellanox.com>
The legacy multi-packet write is the feature allowing to
put multiple packets into one transmitting descriptor,
this feature is supported by only NIC ConnectX-4LX.
The number of packets should be limited to provide
optimal size descriptor and better performance.
Fixes: 18a1c20044 ("net/mlx5: implement Tx burst template")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
The legacy multi-packet write is the feature allowing to
put multiple packets into one transmitting descriptor,
this feature is supported by only NIC ConnectX-4LX.
The number of packets should be limited to provide
optimal size descriptor and better performance.
Fixes: 18a1c20044 ("net/mlx5: implement Tx burst template")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
In extensive metadata mode the MARK copy table is engaged,
if the application creates the flow with zero MARK ID action:
flow create 1 ingress pattern eth / ... / end actions mark id 0 / .. end
And then destroys that, the traffic to the port stops. This happens
due to default flow for the copy table has the zero ID and is removed
with the application rule. The patch extends internal ID variable
to 64 bits and provide the UINT64_MAX ID for the copy table default
rule.
Fixes: dd3c774f6f ("net/mlx5: add metadata register copy table")
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
When set the GRE item, GRE key should follow after GRE header, or the
header gre_item pointer used by the key will be invalid.
Currently in the mlx5_flow_validate_item_gre_key() function, the header
gre_item pointer is access before checking if the key is after the
header or not. Once the key item is before the header, invalid gre_item
pointer access happens.
Move the gre_item pointer access after the GRE header check to avoid the
crash issue.
Fixes: a7a0365565 ("net/mlx5: match GRE key and present bits")
Cc: stable@dpdk.org
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
GENEVE is available in tunnel offloads. Add it as the default support
option.
Signed-off-by: Suanming Mou <suanmingm@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
The header mlx5_glue.h includes rte_byteorder.h, which isn't
pulled by global_inc. This patch adds the missing include directory
and fixes the build error:
In file included from drivers/net/mlx5/mlx5_glue.c:31:
drivers/net/mlx5/mlx5_glue.h:12:10: fatal error:
rte_byteorder.h: No such file or directory
The build failure can be triggered with:
meson -Dibverbs_link=dlopen build && ninja -C build
Fixes: 400d985eb5 ("net/mlx5: add VLAN push/pop DR commands to glue")
Signed-off-by: Ali Alnubani <alialnu@mellanox.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
ConnectX-4LX supports multiple packets within the single Tx
descriptor. This feature is named as "Legacy Multi-Packet Write"
and imposes a lot of limitations:
- no ACLs, it means no NIC Tx Flows are supported and Tx metadata
become meaningless
- the required minimal inline data must be zero
- no SR-IOV, it means no support in E-Switch configurations,
- no priority and dscp forcing
- no VLAN insertion
- no TSO
- all packets within MPW session must have the same size
This legacy MPW feature is mainly intended for test purposes.
To explicitly engage the feature on ConnectX-4LX the devargs
should be specified:
- txq_mpw_en=1
This feature was dropped in 19.08, this patch reverts it back.
Fixes: 18a1c20044 ("net/mlx5: implement Tx burst template")
Cc: stable@dpdk.org
Signed-off-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
'close()' calls 'stop()' and 'stop()' cancels pthread without any check.
Calling 'stop()' & 'close()' sequentially tries to cancel pthread twice
which will cause a crash.
Adding a state check in 'stop()' before canceling the pthread to prevent
multiple stop.
Fixes: 696fbc7bb4 ("net/kni: remove resources when port is closed")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Tested-by: Yinan Wang <yinan.wang@intel.com>
It's possible that we fail to get the IOMMU group of ifcvf device, this
patch adds a check on the return value.
Coverity issue: 349894
Fixes: a3f8150eac ("net/ifcvf: add ifcvf vDPA driver")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Commit in fixes line sets the DV (Direct Verbs) flow engine as default.
Newer versions of DV flow engine use the DR (Direct Rules) features.
DR is supported from RDMA Core library version rdma-core-24.0.
This cause failure to start port when using older rdma-core version,
without DR support.
This patch selects DV flow engine if rdma-core version is v24.0 or
higher. Verbs flow engine is selected otherwise.
Fixes: cd4569d2bf ("net/mlx5: change default flow engine to DV")
Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
