Change the function prototype to return the function pointer of the
selected Tx/Rx burst function instead of assigning it directly to the
device context.
Such change will enable to use those select functions to query the burst
function that will be selected according to the device configuration.
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Bit-fields in mlx5_rxq_data can be changed on the fly by a control plane -
e.g. rxq->mark. However, vectorized Rx uses a bit-field to mark pending
errors. Even if one bit is written, consequence is to write the whole
integer and this can cause a synchronization issue - two entities write to
a same block without locking. As the pending_err bit is entirely internal
use for the datapath, this can be replaced with a local variable.
Fixes: 6cb559d67b ("net/mlx5: add vectorized Rx/Tx burst for x86")
Fixes: 570acdb1da ("net/mlx5: add vectorized Rx/Tx burst for ARM")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Max number of Tx scatter-gather entries is a property of the device
and is queried at init. This value was not changed in a while and
most probably will not be changed in the future, Therefore and
in order to enhance Tx performance, the Tx max-sge value is hardcoded
in mlx4 PRM code.
This patch adds a verification that the above assumption still holds
and that the hardcoded value is still supported by the mlx4 hardware.
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add description of raw flow type mode for flow_director_filter
command in testpmd. Modify description of flow type parameter
for functions set_hash_global_config, set_hash_input_set and
set_fdir_input_set.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add possibility to load file with raw packet and set it as a
template for FDIR setup.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
When primary address mac is changed, the mac filters were not updated in
the VSI with the new mac addr and incoming packets with this destination
address are dropped by the hardware filters.
This patch removes the VSI mac filter for the previous mac address and
adds a new one for new mac address.
Fixes: e18e01e92c ("i40e: support default MAC address setting")
Cc: stable@dpdk.org
Signed-off-by: Laurent Hardy <laurent.hardy@6wind.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add a new Rx function using AVX2 instructions for higher
performance. For now, this functionality is limited to platforms
with Intel Xeon Scalable Processor(SP). The function to be used
is selected at runtime, not just at compile-time.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add a new Tx function using AVX2 instructions for higher
performance. For now, this functionality is limited to platforms
with Intel Xeon Scalable Processor(SP). The function to be used
is selected at runtime, not just at compile-time.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch mainly adds/removes comments for function parameters
that were missing or no longer needed.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch clears software resource bits in synchronization
register and updates host interface resource bit error case for
X540. It also fixes compile warnings of using GCC 7.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
With this patch, it uses 2 bytes of buffer reading, as required
for flash read command. It also adds definitions for LESM module.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch adds lockless read/write support for clause 22 PHY,
together with some enhancements for link speed and return value
handling.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Increase SECRX_RDY polling frequency and semaphore timeout which
fixes the FWSW.PT check in ixgbe_mng_present().
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Add common functions for getting OEM product version, option
ROM version, and ETrack id.
Signed-off-by: Qiming Yang <qiming.yang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Rename virtchnl_vf_resource's vf_offload_flags to vf_cap_flags.
The new name is more generic, so more than just offloading
capabilities can be added.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This fix prevents errors or warnings while accessing unaligned 32-bit
data words on non-x86 platforms during getting link info from firmware.
Fixes: e8228f1a16 ("net/i40e/base: report supported link modes")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Previous method for reading LLDP config was based on hard-coded offsets.
It happened to work, because of structured architecture of the NVM memory.
In the new approach, known as FLAT, we need to calculate the absolute
address, instead of using relative values. Needed defines for memory
location were added.
Fixes: 8db9e2a1b2 ("i40e: base driver")
CC: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
When using GCC 6.3.0 and EXTRA_CFLAGS=-Og, the compiler is not smart
enough to see that when you have an integrated VF that just one of the
if statemets has to be true so that ntu is always set. Fix the way that
the code is for integrated VFs so that the compiler won't complain.
Fixes: 9783eb15eb ("i40e/base: wrap the register definitions for PF and VF")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
The FW has the ability to return a critical error on every AQ command.
So add the new return type as critical error to sync with firmware.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add new AQ command that help to inform software how advanced
rearrangement process is.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
New control bits were defined for flat NVM structure.
One for pointing which NVM bank is currently used and
one used as indicator of structure type.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This fix solves an issue occurring while calling i40e_led_set function
from the driver with "blink" parameter set as TRUE. This call resulted
in Activity LED blinking instead of Link LED, which may lead to errors
in physically identyfying the port, since Activity LED may be blinking
for different reasons aswell.
Fixes: 51b27bc5d8 ("i40e/base: update LED blinking")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
This patch adds new I40E_NVMUPD_GET_AQ_EVENT state
to allow retrieval of AdminQ events as a result.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add preservation flags support on X722 devices for NVM update AdminQ
function wrapper. Add new parameter and handling to nvm update admin
queue function intended to allow nvmupdate tool to configure the
preservation flags in the AdminQ command.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
1. Cleanup logical in __i40e_read_nvm_word and reuse it in
i40e_read_nvm_word.
2. Change couple functions to static so we can remove uncessary function
declarations
3. Cleanup logical in i40e_validate_nvm_checksum.
4. Add more debug information in PF reset
5. correct comments
6. Minor code style fix.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
NVM lock is only required at below situation:
1. its X722 device or
2. API version >= 1.5
or may have issue at firmware downgrade.
Fixes: c5846a125b ("net/i40e/base: fix NVM access interfering")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add new Adminq command i40e_aqc_opc_set_dcb_parameters that
helps to get DCB parameters in data structure i40e_aqc_set_dcb_parameters.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Introduce a helper function which can convert the AdminQ link speed
definition into a virtchnl definition. This can then be used by host
driver implementations in order to safely convert to the interface
recognized by the virtual functions.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add byte swap commandwhen transferring data between memory and firmware
while using PHY register access functions. Endianness also need to be
handled correctly during these swaps.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
When the I2C is busy, the PHY reads are delayed. The firmware will
return EGAIN in these cases with an expectation that the SW will trigger
the reads again. This patch retries the operation for a maximum period
of 500ms.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Fix a bug that adminq spin lock is not be released before function
i40e_nvmupd_command returns.
Fixes: 5a2e46a3e4 ("net/i40e/base: refactor NVM update command processing")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Add new PHY type I40E_PHY_TYPE_NOT_SUPPORTED_HIGH_TEMP, it will be set
by firmware if device module does not meet the thermal requirements.
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Update i40e.rst to declare DDP support and input set configuration,
as implemented in DPDK 17.11.
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Tx_q check fails when the SRIOV is active and tx_q > rx_q. It has
to use the maximum HW queue number for calculation, to get the
right number of queue can be used.
Fixes: 27b609cbd1 ("ethdev: move the multi-queue mode check to specific drivers")
Cc: stable@dpdk.org
Signed-off-by: Yanglong Wu <yanglong.wu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
When use port stats register to calculate the packet count, LLDP packets
are counted in statistics which is not expected, the patch exclude this
number from total number.
Fixes: 763de290cb ("net/i40e: fix packet count for PF")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Function i40e_GLQF_reg_init() overwrites global register for
flexible payload, forcing extraction of first 16 bytes of
L2/L3/L4 payload to the field vector even if flexible payload
is not used by an application. Such unconditional turn on of
flexible payload effectively disables ability to use outer
IP Destination address for RSS/FDIR for tunnelled packets,
as flexible payload overwrites outer IP destination address
on the field vector.
Now flexible payload turned on only when flow director is
enabled and configured.
Signed-off-by: Kirill Rybalchenko <kirill.rybalchenko@intel.com>
Acked-by: Beilei Xing <beilei.xing@intel.com>
Without this patch, the number of queues per i40e VF is set to 4
by CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4 in config/common_base.
It is a fixed value determined at compile time and can't be changed
at run time.
With this patch, the number of queues per i40e VF can be determined
at run time. For example, if the PCI address of an i40e PF is
aaaa:bb.cc, with the EAL parameter -w aaaa:bb.cc,queue-num-per-vf=8,
the number of queues per VF created from this PF is set to 8.
If there is no "queue-num-per-vf" setting in EAL parameters, it uses
the default value of 4. And if the value after the "queue-num-per-vf"
is invalid, it will also use the default value. The valid values can
be 1, 2, 4, 8, or 16.
Signed-off-by: Wei Dai <wei.dai@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Current default ITR interval I40E_QUEUE_ITR_INTERVAL_DEFAULT is
used by both DPDK PF and DPDK VF, but this ITR interval value
will cause lots of interrupts when using VF. This patch modifies
VF default ITR interval to reduce interrupts.
ITR interval can be reconfigured by RTE_LIBRTE_I40E_ITR_INTERVAL
if expecting low latency.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Failed to create two FDIR rules with different vlan id for
the same PCTYPE. Root cause is that wrong hash key length
is used.
Fixes: 4149825bbd ("net/i40e: finish integration FDIR with generic flow API")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Rte_flow was defined to include RSS, this patch moves ixgbe
existing RSS to rte_flow. The old RSS configuration is kept
as it was, and can be deprecated in the future.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
Rte_flow was defined to include RSS, this patch moves igb
existing RSS functionalities into rte_flow. The old RSS
configuration method is kept as it was, and can be deprecated in
the future.
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Wei Dai <wei.dai@intel.com>
This patch fixes the issue of mask check in NVGRE parser
for flow API.
Fixes: 11777435c7 ("net/ixgbe: parse flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
