The example is calling rte_eal_wait_lcore without checking return value.
Now it is fixed by checking the value and print proper message.
Coverity issue: 37789, 37790
Fixes: cc7e8ae84f ("examples/bond: add example application for link bonding mode 6")
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Coverity reported lots of out-of-bounds in function
vxlan_link, these issues should happen when index
port_id evaluates to 2, cause size of arrays is
2 in structure.
Fix this issue by modifying judgement condition, make
sure port_id is less than 2.
Coverity issue: 107121, 107122, 107123, 107124, 107125
Fixes: 4abe471ed6 ("examples/tep_term: implement VXLAN processing")
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Update l3fwd example usage and documentation with missing options.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
crypto_statistics array was not big enough for storing
all the possible crypto device statistics, as its size was
RTE_MAX_ETHPORTS, but should be RTE_CRYPTO_MAX_DEVS, leading
this to a potential out-of-bounds issue.
Coverity issue: 120145
Fixes: 387259bd6c ("examples/l2fwd-crypto: add sample application")
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Crypto operations are enqueued in the crypto devices
when the crypto device buffers are full (MAX_PKT_BURST),
in order to be more efficient.
The problem is that operations might be stuck in those buffers,
if they never get full, and therefore, those operations
will never be performed.
Therefore, it is necessary to have a buffer flush mechanism,
similar to the one used for flush the TX buffers, so eventually,
all packets received are ciphered and sent out.
Fixes: 387259bd6c ("examples/l2fwd-crypto: add sample application")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
When the specified cores and memory lie on different NUMA socket with
physical NIC, vhost fails to set up Rx queue, and exits without any
hints. This could leads to confusion of users.
This patch fixes it by adding some error messages when calling ether
APIs returns errors.
Suggested-by: Yulong Pei <yulong.pei@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The multi_process example do not need rte_hash.
But these examples cannot compile if rte_hash is not available:
- ipsec-secgw (was already protected - no change)
- ipv4_multicast
- l3fwd-power
- l3fwd-vf
- tep_termination
- ip_pipeline
The ip_pipeline example is not disabled because its dependencies
are handled with #ifdef. It may require a separate fix.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The ethtool app was allocating too little space for 64-bit
registers which resulted in memory corruption.
Removes hard-coded assumption that device registers
are always 32 bits wide. The rte_eth_dev_get_reg_length
and rte_eth_dev_get_reg_info callbacks did not
provide register size to the app in any way while is
needed to allocate correct number of bytes before
retrieving registers using rte_eth_dev_get_reg.
This commit changes rte_eth_dev_get_reg_info so that
it can be used to retrieve both the number of registers
and their width, and removes the now-redundant
rte_eth_dev_get_reg_length.
Signed-off-by: Zyta Szpak <zyta.szpak@semihalf.com>
Acked-by: Remy Horton <remy.horton@intel.com>
The mempool_count and mempool_free_count behaved contrary to what their
names suggested. The free_count function actually returned the number of
elements that were allocated from the pool, not the number unallocated as
the name implied.
Fix this by introducing two new functions to replace the old ones,
* rte_mempool_avail_count to replace rte_mempool_count
* rte_mempool_in_use_count to replace rte_mempool_free_count
In this patch, the new functions are added, and the old ones are marked
as deprecated. All apps and examples that use the old functions are
updated to use the new functions.
Fixes: af75078fec ("first public release")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Some libraries were missing their dependency on eal, mbuf, mempool,
ring and kvargs.
It is revealed by the linker option "-z defs".
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Add a new paramter (flags) to rte_vhost_driver_register(). DPDK
vhost-user acts as client mode when RTE_VHOST_USER_CLIENT flag
is set. The flags would also allow future extensions without
breaking the API (again).
The rest is straingfoward then: allocate a unix socket, and
bind/listen for server, connect for client.
This extension is for vhost-user only, therefore we simply quit
and report error when any flags are given for vhost-cuse.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
With all the previous prepare works, we are just one step away from
the final ABI refactoring. That is, to change current API to let them
stick to vid instead of the old virtio_net dev.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
This change could let us avoid the dependency of "virtio_net"
struct, to prepare for the ABI refactoring.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
The new API rte_vhost_avail_entries() is actually a rename of
rte_vring_available_entries(), with the "vring" to "vhost" name
change to keep the consistency of other vhost exported APIs.
This change could let us avoid the dependency of "virtio_net"
struct, to prepare for the ABI refactoring.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
I failed to figure out what does "fh" mean here for a long while.
The only guess I could have had is "file handle". So, you get the
point that it's not well named.
I then figured it out that "fh" is derived from the fuse lib, and
my above guess is right. However, device_fh represents a virtio
net device ID. Therefore, here I rename it to vid (Virtio-net device
ID, or Vhost device ID; choose one you prefer) to make it easier for
understanding.
This name (vid) then will be considered to the only interface to
applications. That's another reason to do the rename: it's our
interface, make it more understandable.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
Make a copy of virtio device id (device_fh) from the virtio_net struct,
so that we could have less dependency on the virtio_net struct.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
device_fh repsents the device id for a specific virtio net device.
Firstly, "int" would be big enough: we don't need 64 bit. Secondly,
this could let us avoid the ugly "%" PRIu64 ".." stuff.
And since ctx.fh is derived from device_fh, declare it as int, too.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
It does not make sense to ask the application to set/unset the flag
VIRTIO_DEV_RUNNING (that used internal only) at new_device()/
destroy_device() callback.
Instead, it should be set after new_device() succeeds and reset before
destroy_device() is invoked inside vhost lib. This patch fixes it.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Tested-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Rich Lane <rich.lane@bigswitch.com>
There are two tailq lists, one for logging all vhost devices, another
one for logging vhost devices distributed on a specific core. However,
there is just one tailq entry, named "next", to chain the two list,
which is wrong and could result to a corrupted tailq list, that the
tailq list might always be non-empty: the entry is still there even
after you have invoked TAILQ_REMOVE several times.
Fix it by introducing two tailq entries, one for each list.
Fixes: 45657a5c68 ("examples/vhost: use tailq to link vhost devices")
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
1. add KNI support to the IP Pipeline sample Application
2. some bug fix
3. update doc
4. add config file with two KNI interfaces connected using
a Linux kernel bridge
Signed-off-by: WeiJie Zhuang <zhuangwj@gmail.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Fixes memory leaks detected by Coverity. These are due to ephemeral
memory allocations not being freed when errors occur.
Coverity issue: 127349
Fixes: e2aae1c1ce ("ethdev: remove name from extended statistic fetch")
Signed-off-by: Remy Horton <remy.horton@intel.com>
IPSec transport mode support.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Support IPSec IPv6 allowing IPv4/IPv6 traffic in IPv4 or IPv6 tunnel.
We need separate Routing (LPM) and SP (ACL) tables for IPv4 and IPv6,
but a common SA table.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Modify the default SP config variables names to be consistent with SA.
The resulting naming convention is that variables with suffixes _out/_in
are the default for ep0 and the reverse for ep1.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The application only ASSERTS that an SA is not NULL (only when debugging
is enabled) without properly dealing with the case of not having an SA
for the processed packet.
Behavior should be such as if no SA is found, drop the packet.
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Rework implementation moving from function pointers approach, where each
function implements very specific functionality, to a generic function
approach.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Add support for building the application with DEBUG=1.
This option adds the compiler stack protection flag and enables extra
output in the application.
Also remove unnecessary VPATH setup.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Building the application with -O3 and -fstack-protection (default in
Ubuntu) results in the following error:
*** stack smashing detected ***: ./build/ipsec-secgw terminated
The error is caused by storing an 8B value in a 4B variable.
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Current code fails to correctly check padding sequence for inbound
packets.
Padding sequence starts on 1 but it checks for 0.
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Added new SW PMD which makes use of the libsso_kasumi SW library,
which provides wireless algorithms KASUMI F8 and F9
in software.
This PMD supports cipher-only, hash-only and chained operations
("cipher then hash" and "hash then cipher") of the following
algorithms:
- RTE_CRYPTO_SYM_CIPHER_KASUMI_F8
- RTE_CRYPTO_SYM_AUTH_KASUMI_F9
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
rte_thread_setname was a macro defined only for Linux.
The function rte_thread_setname() can now be used on FreeBSD
as well on Linux.
It is required to build librte_pdump.
The macro was 0 for old glibc. The function is now returning -1.
The related logs are decreased from error to debug level because
it is not an important failure, just a debug inconvenience.
Fixes: 278f945402 ("pdump: add new library for packet capture")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: David Marchand <david.marchand@6wind.com>
Changes the l2fwd keepalive example to show how the new keepalive
enhancements can be used to relay core state to an external process.
Signed-off-by: Remy Horton <remy.horton@intel.com>
Adds and documents new callbacks that allow transitions to core
states other than dead to be reported to applications.
Signed-off-by: Remy Horton <remy.horton@intel.com>
When starting the ip_fragmentation or ip_reassembly example
on several sockets, it fails.
The name of the lpm6 table is the same on every socket,
resulting in a table creation failure (-EEXIST). The failure
appeared after:
commit f82f705b63 ("lpm: fix allocation of an existing object")
Indeed, before this commit the returned value when the existing
table, which was probably a bug in that case: one table for 2
sockets for lpm6, and one per socket for lpm.
Fixes: 74de12b7b6 ("examples/ip_fragmentation: overhaul")
Fixes: b84fb4cb88 ("examples/ip_reassembly: overhaul")
Reported-by: Heng Ding <hengx.ding@intel.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
This script parses the application configuration file and detects all the
pipelines specified therein, and then, it generates all the possible mappings
of those pipelines on the specified CPU core-list.
As a result, each of the possible pipeline-to-core mappings is saved as
separate output configuration file. For example- if input file is
edge_router_downstream.cfg with 3 pipeline (excluding pipeline 0) and
core-list is “1, 2”, following combinations will be generated-
Pipeline 1 Pipeline 2 Pipeline 3
Core = 1 Core = 1 Core = 2
Core = 1 Core = 2 Core = 1
Core = 2 Core = 1 Core = 1
Core = 2 Core = 2 Core = 1
Core = 2 Core = 1 Core = 2
Core = 1 Core = 2 Core = 2
Core = C1 Core = C1H Core = C2
Core = C1 Core = C2 Core = C1H
Core = C2 Core = C1 Core = C1H
This script will help users to analyse the performance of application by
evaluating all the generated configuration files with different
pipelines-to-core mappings and obtaining the application configuration file
with best performance.
To run the script, issue the following command;
./pipeline-to-core-mapping.py -i <input_configuration_file> -pc "s<socket-id>c<core-id>"
Some optional arguments are as follows:
-h, --help show this help message and exit
-ht {ON,OFF}, --hyper-thread {ON,OFF}
enable/disable hyper threading. default is ON
-nO, --no-output-file
disable output config file generation. Output file
generation is enabled by default
Signed-off-by: Guruprasad Mukundarao <guruprasadx.rao@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
In ip_pipeline app, the structure app_thread_data needs to be aligned to
the cache line boundary as threads on different cpu cores are accessing
fields of the app->thread_data and having this structure not aligned on
cacheline boundary leads to false cacheline sharing.
Fixes: 7f64b9c004 ("examples/ip_pipeline: rework config file syntax")
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Return value of function app_pipeline_type_find is not checking before
dereference. Fix this problem by adding checking condition.
Coverity issue: 127196
Fixes: b4aee0fb9c ("examples/ip_pipeline: reconfigure thread binding dynamically")
Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
qw app at its init stage reserve 2*sizeof(int) memory space for quota
and low_watermark shared variables, but both apps (qw and qwctl) assign
wrong address for low_watermark pointer (out of reserved memzone space)
due to wrong pointer arithmetic.
CID 30709 : Extra sizeof expression (SIZEOF_MISMATCH)
suspicious_pointer_arithmetic: Adding 4UL /* sizeof (int) */ to pointer
(unsigned int *)(*qw_memzone).addr of type unsigned int * is suspicious
because adding an integral value to this pointer automatically scales
that value by the size, 4 bytes, of the pointed-to type, unsigned int.
Most likely, sizeof (int) is extraneous and should be replaced with 1.
Coverity issue: 30709
Fixes: 1d6c3ee332 ("examples/quota_watermark: initial import")
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
After extending IPv4 next hop in lpm library, size of dst_port array was
changed from 16 to 32 bits in l3fwd-thread example, without modification
of the rest of path written for 16 bit value.
This patch uses similar approach for fix, like in commit 8353a36a9b
("examples/l3fwd: fix size of destination port ids"), restoring 16 bit size
for destination port ids and doing necessary conversion from 32 to 16 bit
after lpm_lookupx4.
Fixes: dc81ebbaca ("lpm: extend IPv4 next hop field")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
This fixes wrong logic in get_dst_port() on lpm path causing unpredictable
return value when ipv4/ipv6 lookup success (return with no value).
Fixes: dc81ebbaca ("lpm: extend IPv4 next hop field")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
If no SSE nor NEON are available the l3fwd should complain loudly
to quickly find out the reason.
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
l3fwd sets the mempool cache size to 256, selected the same value for l2fwd
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
The sample configuration file demonstrates that network layer components such
as TCP, UDP, ICMP etc, can be easily integrated into ip pipeline infrastructure.
Similarily, various other functionalities such as IP Reassembly for input
traffic with local destination and IP Fragmentation to enforce the MTU for
the routed output traffic, can be added using SWQs enabled with
reassembly and fragmentation features.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The routing pipeline registers a callback function with the nic ports and
this function is invoked for updating the routing entries (corresponding to
local host and directly attached network) tables whenever the nic ports
change their states (up/down).
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
As a result of tracking, output ports of routing pipelines are linked with
physical nic ports (potentially through other pipeline instances).
Thus, the mac addresses of the NIC ports are assigned to routing pipeline
out ports which are connected to them and are further used in routing table
entries instead of hardcoded default values.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This commit implements tracking mechanism for linking routing pipeline
output ports to physical NIC ports.
Once all the pipelines of the application are initialised, mechanism is
invoked during post initialisation phase for relating routing pipeline
output with NIC ports by navigating through the intermediate pipelines,
if present.
The tracking functions of the pipelines which help in navigating through
the intermediate pipelines are moved from pipeline_<pipeline_name>_be.c
to pipeline_<pipeline_name>.c. All pipelines except passthrough pipelines
use default tracking function (pipeline/pipeline_common_fe.c).
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
To allow more queues, pipeline types, threads, source/sink ports,etc., in
the ip pipeline application, larger values of macros are set.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch enables rss (receive side scaling) per network interface
through the configuration file. The user can specify following
parameters in LINK section for enabling the rss feature - rss_qs,
rss_proto_ipv4, rss_proto_ipv6 and ip_proto_l2.
The "rss_qs" is mandatory parameter which indicates the queues to be
used for rss, while rest of the parameters are optional. When optional
parameters are not provided in the configuration file, default setting
(ETH_RSS_IPV4 | ETH_RSS_IPV6) is assumed for "rss_hf" field of the
rss_conf structure.
For example, following configuration can be applied for using the rss
on port 0 of the network interface;
[PIPELINE0]
type = MASTER
core = 0
[LINK0]
rss_qs = 0 1
[PIPELINE1]
type = PASS-THROUGH
core = 1
pktq_in = RXQ0.0 RXQ0.1 RXQ1.0
pktq_out = TXQ0.0 TXQ1.0 TXQ0.1
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This commit adds following changes to configuration file parsing of
the ip pipeline application;
1. Parsing routines related to packet queues (pktq_in/out fields in the
PIPELINE section) and message queues (msgq_in/out fields of in the MSGQ
Section) are updated.
In the parsing routines, function "strtok_r()" is used for parsing the
string instead of manually checking the string termination, white
spaces, tabs etc., between the string tokens. Each call to strtok_r()
returns a pointer to a null-terminated string containing the next token.
If no more tokens are found, strtok_r() returns NULL. As a result of
using strtok_r(), the code size of the parsing routines is reduced
significantly.
2. Replace PARSER_PARAM_ADD_CHECK macro by more specific macros such as
PARSE_CHECK_DUPLICATE_SECTION, PARSE_CHECK_DUPLICATE_SECTION_EAL to detect
duplicate entries in the various sections of the configuration file
3. Add new macros PARSER_ERROR_NO_ELEMENTS and PARSE_ERROR_TOO_MANY_ELEMENTS
for detecting no element and more elements than allowed situations
respectively, in the section entry.
4. Add new macros APP_PARAM_ADD_LINK_FOR_RXQ, APP_PARAM_ADD_LINK_FOR_TXQ
and APP_PARAM_ADD_LINK_FOR_TM which add corresponding nic ports entry to
the application param structure while parsing rx/tx queues, TM (Traffic
Manager) port sections and pktq_in/out entries of pipeline sections
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Several routing commands are merged into two commands:
route and arp - these two commands are handled by cli library.
Rest of the commands are handled internaly by the pipeline code.
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch modifies flow classifications pipeline command line
interface. All commands are merged into one cmd_fc_parsed.
Additionally a classification for ipv6, ipv4 and qinq can be added from
configuration file.
1. flow add qinq bulk
File line format:
qinq <svlan> <cvlan> port <port ID> id <flow ID>
File line example:
qinq 1 2 port 3 id 0
2. flow add ipv4 bulk
File line format:
ipv4 <sipaddr> <dipaddr> <sport> <dport> <proto> port <port ID> id
<flowID>
File line example:
ipv4 1.2.3.4 10.20.30.40 63 127 6 port 2 id 999
3. flow add ipv6 bulk
File line format:
ipv6 <sipaddr> <dipaddr> <sport> <dport> <proto> port <port ID> id
<flowID>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
All link commands are merged into one command:
cmd_link_parsed.
Improve run command to allow run periodically.
Adding static keyword to a lot of token declarations.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add a couple of additional functions that will allow to parse many types
of input parameters, i.e.: bool, 16, 32, 64 bits, hex, etc.
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch fixes the NULL packet processing problem. Originally,
pipeline's write attempt to NULL packets generated by source
port may crash the application.
This patch fixes the problem by enforcing each source port
defined in cfg file containing a user specified or default pcap
file path.
Fixes: 0e1e7d53 ("examples/ip_pipeline: add pcap file source")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
When initializing crypto devices within the app,
the provided key sizes are checked against the supported
sizes from the crypto device capabilities.
When the supported sizes are not a range, but a single value,
the check may become an infinite loop (when size is not supported).
Fixes: a061e50a0d ("examples/l2fwd-crypto: fix ambiguous input key size")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
This patch enables AES-XCBC-MAC authentication algorithm support to
l2fwd-crypto sample application.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
This patch enables AES counter mode algorithm support to l2fwd-crypto
sample application.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
The RTE_ETH_VALID_PORTID_OR_ERR_RET macro is used in some places
to check if a port id is valid or not. This commit makes use of it in
some new parts of the code.
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some architectures (ex: Power8) have a cache line size of 128 bytes,
so the drivers should not expect that prefetching the second part of
the mbuf with rte_prefetch0(&m->cacheline1) is valid.
This commit add helpers that can be used by drivers to prefetch the
rx or tx part of the mbuf, whatever the cache line size.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The rte_eth_dev_count() function will never return a value greater
than RTE_MAX_ETHPORTS, so that checking is useless.
Signed-off-by: Mauricio Vasquez B <mauricio.vasquezbernal@studenti.polito.it>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
bulk functions expect that all memory is set with zeros
Fixes: 67ebdbef0c ("examples/ip_pipeline: add bulk update of firewall rules")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
In the function app_init_eal(struct app params * app) number of
entries into array exceeds the size of the array if the conditions
are fulfilled.
Coverity issue: 124567
Fixes: 7f64b9c004 ("examples/ip_pipeline: rework config file syntax")
Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Value returned from a function is not checked for errors before being used.
Coverity issue: 13207
Fixes: 07db4a9750 ("examples/distributor: new sample app")
Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Infinite loop: The loop does not have a normal termination condition,
so will continue until an abnormal condition arises.
In rte_netmap_poll: Infinite loop with unsatisfiable exit condition.
Coverity issue: 30701
Fixes: 06371afe ("examples/netmap_compat: import netmap compatibility example")
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
In expression 1ULL << i, left shifting by more than 63 bits
has undefined behavior. The shift amount, i, is as much as 127.
Coverity issue: 30690
Fixes: de3cfa2c98 ("sched: initial import")
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
overrun-local: Overrunning array tokens of 8 8-byte elements
at element index 4294967294 (byte offset 34359738352)
using index i (which evaluates to 4294967294).
Coverity issue: 30708
Fixes: de3cfa2c98 ("sched: initial import")
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
In kni_free_kni: Value returned from a function is not checked for errors
before being used
Coverity issue: 30692
Fixes: b475eb0bc4 ("examples/kni: new parameters")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
In add_vm: The string buffer may not have a null terminator if the source
string's length is equal to the buffer size
Coverity issue: 30691
Fixes: e8ae9b6625 ("examples/vm_power: channel manager and monitor in host")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
switch_worker() is the last piece of code that is messy yet it touches
virtio/vhost device.
Here do a cleanup, so that we will be less painful for later vhost ABI
refactoring.
The cleanup is straight forward: break long lines, move some code into
functions. The last, comment a bit on switch_worker().
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
It has always been a mystery (at least to me before) that how many
mbuf is enough while creating an mbuf pool. While current macro
NUM_MBUFS_PER_PORT gives your some insights, it's not that accurate:
it doesn't consider the case we may receive a big packet, say 64K
when TSO is enabled.
We actually have tried to fix it once before, with commit 5499c1fc9b
("examples/vhost: fix mbuf allocation"), but it just workarounded it
by enlarging it a bit so that the case described in the commit log
by passes. So, while trying to fix it ultimately, I'm thinking how
big is big enough, and what are the factors need consider to figure
out a proper value.
Therefore, here you are. I introduced a helper function to create
the mbuf pool, and do the "how many mbufs are needed" calculation
there. Also, I put detailed comments how that comes, to serve as
the guidelines.
Fixes: 9fd72e3cbd ("examples/vhost: add virtio offload")
Fixes: 5499c1fc9b ("examples/vhost: fix mbuf allocation")
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Every time I do a VM2VM iperf test with vhost example, I have to set
the arp table manually, as vhost-switch just ignores the broadcast
packet, leaving the ARP request not served.
Here we do a transmit a broadcast packet (such as ARP request) to
every vhost device, as well as the physical port, to fix above
arp table issue.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
rte_ether.h already provides a helper function to do mac address
compare. No need to define our own, use it directly.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Interestingly, DESC_PER_CACHELINE has never been used since the
introduction of vhost example. Remove it.
vlan_ethhdr struct and VLAN_ETH_HLEN macro reference had been removed
by commit 4d50b6acbd ("examples/vhost: adapt Tx routing to lib"), but
had forgot to remove the definition.
Fixes: 4d50b6acbd ("examples/vhost: adapt Tx routing to lib")
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
It's reported that it's has not been working for a long while. And due
to it's complex, it's better to redesign it than to fix it to make it
work again.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
The macro RTE_VERIFY always checks a condition.
It is optimized with "unlikely" hint.
While this macro is well suited for test applications, it is preferred
in libraries and examples to enable such check in debug mode.
That's why the macro RTE_ASSERT is introduced to call RTE_VERIFY only
if built with debug logs enabled.
A lot of assert macros were duplicated and enabled with a specific flag.
Removing these #ifdef allows to test these code branches more easily
and avoid dead code pitfalls.
The ENA_ASSERT is kept (in debug mode only) because it has more
parameters to log.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The debug logs must be enabled at compile-time and run-time.
There are also some internal flags in some examples to enable the debug
logs of the applications. They are now enabled in debug configs and
can be disabled thanks to the more generic logtype mechanism:
rte_set_log_type(RTE_LOGTYPE_USER1, 0);
Removing these #ifdef allows to test these code branches more easily
and avoid dead code pitfalls.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
It seems that with gcc >5.x and -O2/-O3 optimization breaks packet
grouping algorithm in l3fwd-thread application causing segfault.
When last packet pointer "lp" and "pnum->u64" buffer points the same
memory buffer, high optimization can cause unpredictable results.
It seems that assignment of precalculated group sizes may interfere
with initialization of new group size when lp points value inside
current group and didn't should be changed.
With gcc >5.x and optimization we cannot be sure which assignment will be
done first, so the group size can be counted incorrectly causing segfault.
This patch eliminates intersection of assignment of initial group size
(lp[0] = 1) and precalculated group sizes when gptbl[v].idx < 4.
The same patch was applied for original l3fwd (af1694d94).
Fixes: d48415e1fe ("examples/performance-thread: add l3fwd-thread app")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
CID: #30688
The operaton may have an undefined behavior or yield to an unexpected result.
In setup_port_lcore_affinities: A bit shift operation has a shift amount
which is too large or has a negative value.
Fixes: af75078fec ("first public release")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
The function rte_hash_lookup_multi() was renamed rte_hash_lookup_bulk()
in DPDK 1.4 and was kept as an undocumented alias.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Some statistics were deprecated since release 2.1 (49f386542a).
The last deprecated counter to be used was imcasts.
The VF loopback statistics are also removed as they are used only
in igb and duplicated in extended statistics.
The new counters should be added to extended statistics.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
Support of PCAP file has been added to rte_port in release 16.04
as NEXT_ABI. It is in the standard ABI of the release 16.07.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
vm_power_manager utilize libvirt API virDomainGetVcpuPinInfo to
retrieve domU vcpu information. This API is implemented from version 0.9.3.
Suse11 SP3 32bit default libvirt version is 0.8.8.
examples/vm_power_manager/channel_manager.c:
channel_manager.c:117:3: error: implicit declaration of function
'virDomainGetVcpuPinInfo'
Check and skip it from examples or raise an error when trying to compile
without libvirt or with a too old libvirt.
Fixes: e8ae9b662 ("examples/vm_power: channel manager and monitor in host")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Compilation fails on 32 bits on Vhost_xen sample app, due to wrong casting:
examples/vhost_xen/vhost_monitor.c: In function ‘new_device’:
examples/vhost_xen/vhost_monitor.c:288:62: error: cast from pointer to integer
of different size [-Werror=pointer-to-int-cast]
Fixes: 47bd46112b ("xen: import xenvirt pmd and vhost_xen")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Performance-thread sample app is only supported for x86_64 targets,
so this commit adds a check to avoid compilation on other targets.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
In icc 14.0, compilation was broken:
examples/ipsec-secgw/sa.c(212): error: a designator for an anonymous
union member can only appear within braces corresponding to that anonymous union
.cipher = { RTE_CRYPTO_CIPHER_OP_ENCRYPT, RTE_CRYPTO_CIPHER_AES_CBC,
^
The member in anonymous union initialization should be inside '{}',
otherwise it will report an error.
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
error log:
ip_pipeline/pipeline/pipeline_routing_be.c:1537:
integer constant is too large for 'long' type
Fixes: 0ae7275810 ("examples/ip_pipeline: add more functions to routing pipeline")
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
CID 120150:
Wrong size of the allocated memory. Passing argument as size of pointer
(8UL) instead of size of structure app_pipeline_firewall_rule.
Fixes: 67ebdbef0c ("examples/ip_pipeline: add bulk update of firewall rules")
Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com>
In l3fwd-acl and l3fwd-power not all tx ports was included in tx_port_id
array, used to periodically drain only available ports. This caused that
some packets can remain in buffer when application stops to receiving
packets or when size of burst is small.
Fixes: e2366e74e0 ("examples: use buffered Tx")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
When parsing crypto device type, the string was being copied
with strcpy(), which could overflow the destination buffer
(which is 32 byte long), so snprintf() should be used instead.
This fixes coverity issue 124575:
/examples/l2fwd-crypto/main.c: 1005 in l2fwd_crypto_parse_args_long_options()
>>> CID 124575: (STRING_OVERFLOW)
>>> You might overrun the 32 byte fixed-size string
"options->string_auth_algo" by copying "optarg" without checking the length.
1005 strcpy(options->string_auth_algo, optarg);
Fixes: 49f79e8648 ("examples/l2fwd-crypto: add missing string initialization")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
It seems that with gcc >5.x and -O2/-O3 optimization breaks packet
grouping algorithm.
When last packet pointer "lp" and "pnum->u64" buffer points the same
memory buffer, high optimization can cause unpredictable results.
It seems that assignment of precalculated group sizes may interfere
with initialization of new group size when lp points value inside
current group and didn't should be changed.
With gcc >5.x and optimization we cannot be sure which assignment will
be done first, so the group size can be counted incorrectly.
This patch eliminates intersection of assignment of initial group size
(lp[0] = 1) and precalculated group sizes when gptbl[v].idx < 4.
Fixes: 94c54b4158 ("examples/l3fwd: rework exact-match")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
error: loops in this subroutine are not good vectorization candidates
(try compiling with O3 and/or IPO).
this error occurs in icc 15.0.1
Solution to disable this diagnostic message
https://software.intel.com/en-us/forums/intel-c-compiler/topic/537688
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
Fixes: 8cc72f2814 ("examples/vmdq_dcb: support X710")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Fix for compilation errors for icc:
error #188: enumerated type mixed with another type
Fixes: 00c58901f1 ("examples/l2fwd-crypto: use key-value list of supported algorithms")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch fixes the pcap file parsing in ip_pipeline. Originally, the
parser recognizes the pcap related entries regardless of the RTE_PORT_PCAP
macro definition status.
Fixes: fe5d046213 ("examples/ip_pipeline: add pcap file dump")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch redesigns the API to set the link speed/s configuration
of an ethernet port. Specifically:
- it allows to define a set of advertised speeds for
auto-negociation.
- it allows to disable link auto-negociation (single fixed speed).
- default: auto-negociate all supported speeds.
A flag autoneg in struct rte_eth_link indicates if link speed was a
result of auto-negociation or was fixed by configuration.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Tested-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Tested-by: Beilei Xing <beilei.xing@intel.com>
Tested-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Define and use ETH_LINK_UP and ETH_LINK_DOWN where appropriate.
Signed-off-by: Marc Sune <marcdevel@gmail.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch fixes the initialization error in flow classification
pipeline. Originally, when there is no key_mask specified in the
CFG file, all '0' mask is utilized.
Fixes: 1a33c5ea2f ("examples/ip_pipeline: clean config parser")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The branch was disabled because of a typo in the SSE4.2 flag.
Change also the x86_64 flag to use a DPDK one.
Fixes: 28377375c6 ("examples/ip_pipeline: fix build for x86_64 without SSE4.2")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Originally l3fwd used 16-bit value to store dest_port value.
To accommodate 24-bit nexthop dest_port was increased to 32-bit,
though some further packet processing code remained unchanged and
still expects dest_port to be 16-bit.
That is not correct and can cause l3fwd invalid behaviour or even
process crash/hang on some input packet patterns.
For the fix, I choose the simplest approach and restored dest_port
as 16-bit value, plus necessary conversions from 32 to 16 bit values
after lpm_lookupx4.
Fixes: dc81ebbaca ("lpm: extend IPv4 next hop field")
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Not all tx ports was included in tx_port_id array, used to periodically
drain only available ports. This caused that some packets remain in buffer
when application stops to receiving packets.
Fixes: 52c97adc1f ("examples/l3fwd: fix exact match performance")
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
In FreeBSD, sys/types.h and netinet/in.h need to be included before
netinet/ip.h
There were missed typedef for u_char - <sys/types.h>
There were missed network definitions - <netinet/in.h>
Failure #13: http://dpdk.org/ml/archives/test-report/2016-March/001896.html
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Display extra crypto information (algorithms, keys/IV/AAD used, chain...),
so user can know exactly what operations are being carried out.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
In order to ease the parsing and display of supported algorithms
in the application, two new arrays are created, which contains
the strings of the different cipher and authentication algorithms,
These lists are used to parse the algorithms from the command line,
and will be used to display crypto information to the user.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Cipher/Auth keys, AAD and IV must be passed from command line
with ":" between bytes, but help was not clarifying that.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Some crypto algorithms support more than one key size
(including cipher key, authentication key, IV and AAD),
but the app was using always the minimum size.
These changes allows the user to use an specific size,
either from the string provided with cipher_key, auth_key, iv and ADD
parameters, or from the values provided with cipher_key_random_size,
auth_key_random_size, iv_random_size and aad_random_size.
This also allows the user to specify the digest size.
Fixes: 1df9c0109f ("examples/l2fwd-crypto: parse key parameters")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
App was generating a random IV/AAD of only 4 bytes,
instead of the actual length, since it was using sizeof(length).
Fixes: 27cf2d1b18 ("examples/l2fwd-crypto: discover capabilities")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
When passing the preferred crypto device type in the command line
parameters, the string (HW/SW/ANY) was not being saved, which is used
for error information to the user.
Fixes: 27cf2d1b18 ("examples/l2fwd-crypto: discover capabilities")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
L2fwd-crypto app is based on L2fwd app and it inherits
some of its parameters (such as portmask, queues per core...).
The parameter period (period of time between statistic updates)
is -T in L2fwd, but was -t in L2fwd-crypto, so for consistency,
it is changed back to -T
Fixes: 387259bd6c ("examples/l2fwd-crypto: add sample application")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
When compiling dpdk_qat app with an i686 target on a x86_64 OS,
an error message was shown, saying that it can only be built
on a 32-bit OS, which should be i686 OS, as other 32-bit OS
are not supported.
Fixes: 3460012bcc ("examples/qat: update")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
As a example to use ptype info, l3fwd needs firstly to use
rte_eth_dev_get_supported_ptypes() API to check if device and/or
its PMD driver will parse and fill the needed packet type; if not,
use the newly added option, --parse-ptype, to analyze it in the
callback softly.
As the mode of EXACT_MATCH uses the 5 tuples to caculate hash, so
we narrow down its scope to:
a. ip packets with no extensions, and
b. L4 payload should be either tcp or udp.
Note: this patch does not completely solve the issue, "cannot run
l3fwd on virtio or other devices", because hw_ip_checksum may be
not supported by the devices. Currently we can:
a. remove this requirements, or
b. wait for virtio front end (pmd) to support it.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Added validation for queue id of config parameter tuple.
This validation enforces user to enter queue ids of a port
from 0 and in sequence.
This additional validation on queue ids avoids ixgbe crash caused
by null rxq pointer access inside ixgbe_dev_rx_init.
Reason for null rxq is, L3fwd application allocates memory only for
queues passed by user. But rte_eth_dev_start tries to initialize rx
queues in sequence from 0 to nb_rx_queues,
which is not true and coredump while accessing the unallocated queue .
Fixes: af75078fec ("first public release")
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
While the last arg of virtio_tx_route() asks a vlan tag, we currently
feed it with device_fh, which is wrong. Fix it.
Fixes: 4796ad63ba ("examples/vhost: import userspace vhost application")
Reported-by: Qian Xu <qian.q.xu@intel.com>
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Comments for PKT_TX_TCP_SEG at rte_mbuf says that we should only set
PKT_TX_IP_CKSUM and reset ip hdr checksum for IPv4:
- if it's IPv4, set the PKT_TX_IP_CKSUM flag and write the IP checksum
to 0 in the packet
Fixes: 9fd72e3cbd ("examples/vhost: add virtio offload")
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
For checksum offloading only case, the TCP/IP stack would
have calculated the pseudo checksum. Therefore, we don't
need to re-calculate it again here; remove it.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
NULL crypto operation is now supported, but l2fwd-crypto
was missing an update on the list of supported algorithms
that can be passed from command line.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
AES GCM is an algorithm for both ciphering and authentication,
but the authentication algorithm was missing in the
list of supported algorithms that can be passed from command line.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Since SNOW3G UEA2/UIA2 are supported now by both HW and SW,
l2fwd-crypto may use them, extending the list of algorithms
parsed from command line.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Previous cdev parameter was changed to cdev_type,
to select a crypto device type preference (HW/SW/ANY),
instead of the device itself (QAT/AESNI...).
Also deleted cdev duplicated parameter from the help.
Fixes: 27cf2d1b18 ("examples/l2fwd-crypto: discover capabilities")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
For GLIBC < 2.17 it is necessery to add -lrt for linker
from glibc > 2.17 The `clock_*' suite of functions (declared in <time.h>) is now
available directly in the main C library. This affect Ubuntu 12.04 in i686
and other older Linux Distros).
Fixes: 4758404a30 ("mk: fix eal shared library dependencies")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
The flag ENABLE_MULTI_BUFFER_OPTIMIZE has been removed so the
related comments are now useless.
Fixes: 268888b5b0 ("examples/l3fwd: modularize")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
clang reports these errors:
error: too many arguments to function call, expected 2, have 3
examples/performance-thread/l3fwd-thread/main.c:1220:1: note:
'l3fwd_simple_forward' declared here
examples/l3fwd/main.c:550:1: error: unused function 'send_packetsx4'
The function is used only when ENABLE_MULTI_BUFFER_OPTIMIZE is 1.
Fixes: d48415e1fe ("examples/performance-thread: add l3fwd-thread app")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch implements PQoS as a sample application.
PQoS allows management of the CPUs last level cache,
which can be useful for DPDK to ensure quality of service.
The sample app links against the existing 01.org PQoS library
(https://github.com/01org/intel-cmt-cat).
White paper demonstrating example use case "Increasing Platform Determinism
with Platform Quality of Service for the Data Plane Development Kit"
(http://www.intel.com/content/www/us/en/communications/increasing-platform-determinism-pqos-dpdk-white-paper.html)
Signed-off-by: Wojciech Andralojc <wojciechx.andralojc@intel.com>
Signed-off-by: Tomasz Kantecki <tomasz.kantecki@intel.com>
Signed-off-by: Marcel D Cornu <marcel.d.cornu@intel.com>
It seems that for the most use cases, previous hash_multi_lookup provides
better performance, and more, sequential lookup can cause significant
performance drop.
This patch sets previously optional hash_multi_lookup method as default.
It also provides some minor optimizations such as queue drain only on used
tx ports.
Fixes: 94c54b4158 ("examples/l3fwd: rework exact-match")
Fixes: dc81ebbaca ("lpm: extend IPv4 next hop field")
Fixes: 64d3955de1 ("examples/l3fwd: fix ARM build")
Reported-by: Qian Xu <qian.q.xu@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
l3fwd does not compile with HASH_MULTI_LOOKUP.
2 issues:
* in 64d395 mask0 changed type from xmm_t to rte_xmm_t
-> use x field from rte_xmm_t
* in dc81eb dst_port parameter changed to uint32_t
-> change uint16_t dst_port to uin32_t dsp_port
Fixes: dc81ebbaca ("lpm: extend IPv4 next hop field")
Fixes: 64d3955de1 ("examples/l3fwd: fix ARM build")
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Updated ip_pipeline app is using new changes from LPM library
(Increased number of next hops and added new config structure
for LPM IPv4).
Fixes: f1f7261838 ("lpm: add a new config structure for IPv4")
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Previous l3fwd-power only processes IP and IPv6 packets, other
packets' mbufs are not freed, and this causes a memory leak.
This patch fixes this issue.
Fixes: 3c0184cc0c ("examples: replace some offload flags with packet type")
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
Currently, the example vmdq_dcb only works on Intel(R) 82599 NICs.
This patch extends this sample to make it work both on Intel(R) 82599
and X710/XL710 NICs by making the following changes:
1. add VMDQ base queue checking to avoid forwarding on PF queues.
2. assign each VMDQ pool to a MAC address.
3. add more arguments (nb-tcs, enable-rss) to change the default
setting
4. extend the max number of queues from 128 to 1024.
This patch also reworks the user guide for the vmdq_dcb sample.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Tell the compiler to use unsigned constants for left shift ops,
otherwise building with gcc >= 6.0 fails due to multiple warnings like:
warning: left shift of negative value [-Wshift-negative-value]
Signed-off-by: Panu Matilainen <pmatilai@redhat.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The pass-through pipeline implementation is extended with load balancing
function. This function allows uniform distribution of the packets among
its output ports. For packets distribution, any application level logic
can be applied. For instance, in this implementation, hash value
computed over specific header fields of the incoming packets has been
used to spread traffic uniformly among the output ports.
The following pass-through configuration can be used for implementing
load balancing function over ipv4 traffic;
[PIPELINE0]
type = PASS-THROUGH
core = 0
pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0
dma_src_offset = 278; mbuf (128) + headroom (128) + 1st ethertype offset (14) + ttl offset within ip header = 278 (ipv4)
dma_dst_offset = 128; mbuf (128)
dma_size = 16
dma_src_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF
dma_hash_offset = 144; (dma_dst_offset+dma_size)
lb = hash
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch add packet dumping feature to ip_pipeline. Output port type
SINK now supports dumping packets to PCAP file before releasing mbuf back
to mempool. This feature can be applied by specifying parameters in
configuration file as shown below:
[PIPELINE1]
type = PASS-THROUGH
core = 1
pktq_in = SOURCE0 SOURCE1
pktq_out = SINK0 SINK1
pcap_file_wr = /path/to/eth1.pcap /path/to/eth2.pcap
pcap_n_pkt_wr = 80 0
The configuration section "pcap_file_wr" contains full path and name of
the PCAP file which the packets will be dumped to. If multiple SINKs
exists, each shall have its own PCAP file path listed in this section,
separated by spaces. Multiple SINK ports shall NOT share same PCAP file to
be dumped.
The configuration section "pcap_n_pkt_wr" contains integer value(s)
and indicates the maximum number of packets to be dumped to the PCAP file.
If this value is "0", the "infinite" dumping mode will be used. If this
value is N (N > 0), the dumping will be finished when the number of
packets dumped to the file reaches N.
To enable PCAP dumping support to IP pipeline, the compiler option
CONFIG_RTE_PORT_PCAP must be set to 'y'. It is possible to disable this
feature by removing "pcap_file_wr" and "pcap_n_pkt_wr" lines from the
configuration file.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch add PCAP file support to ip_pipeline. Input port type SOURCE
now supports loading specific PCAP file and sends the packets in it to
pipeline instance. The packets are then released by SINK output port. This
feature can be applied by specifying parameters in configuration file as
shown below;
[PIPELINE1]
type = PASS-THROUGH
core = 1
pktq_in = SOURCE0 SOURCE1
pktq_out = SINK0 SINK1
pcap_file_rd = /path/to/eth1.PCAP /path/to/eth2.PCAP
pcap_bytes_rd_per_pkt = 0 64
The configuration section "pcap_file_rd" contains full path and name of
the PCAP file to be loaded. If multiple SOURCEs exists, each shall have
its own PCAP file path listed in this section, separated by spaces.
Multiple SOURCE ports may share same PCAP file to be copied.
The configuration section "pcap_bytes_rd_per_pkt" contains integer value
and indicates the maximum number of bytes to be copied from each packet
in the PCAP file. If this value is "0", all packets in the file will be
copied fully; if the packet size is smaller than the assigned value, the
entire packet is copied. Same as "pcap_file_rd", every SOURCE shall have
its own maximum copy byte number.
To enable PCAP support to IP pipeline, the compiler option
CONFIG_RTE_PORT_PCAP must be set to 'y'. It is possible to disable PCAP
support by removing "pcap_file_rd" and "pcap_bytes_rd_per_pkt" lines
from the configuration file.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Change the fields of outer_mac and inner_mac in struct
rte_eth_tunnel_filter_conf from pointer to struct in order to
keep the code's readability.
Signed-off-by: Xutao Sun <xutao.sun@intel.com>
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The names of function for tunnel port configuration are not
accurate. They're tunnel_add/del, better change them to
tunnel_port_add/del.
The old functions are directly replaced because the API and ABI
compatibility of ethdev are already broken in 16.04.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The internal buffering of packets for TX in sample apps is no longer
needed, so this patchset also replaces this code with calls to the new
rte_eth_tx_buffer* APIs in:
* l2fwd-jobstats
* l2fwd-keepalive
* l2fwd
* l3fwd-acl
* l3fwd-power
* link_status_interrupt
* client_server_mp
* l2fwd_fork
* packet_ordering
* qos_meter
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Building examples fails with CONFIG_RTE_LIBRTE_LPM=n
The error is caused by the new app ipsec-secgw that gets build
without checking for configuration dependencies.
Fixes: d299106e8e ("examples/ipsec-secgw: add IPsec sample application")
The patch also reorders a couple entries to maintain alphabetic order.
Reported-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Enable NEON support in exact match mode.
l3fwd example did not compile on ARM due to SSE2 instrincics used
in generic part.
Some instrinsins were used to initialize data structures and those were
replaced by ordinary structure initalization.
All SSE2 intrinsics used in forwarding, i.e. masking the IP/TCP header
are moved to single inline function and made arch-specific.
Signed-off-by: Maciej Czekaj <maciej.czekaj@caviumnetworks.com>
Crypto devices now have information about
which crypto operations they are capable of provide.
This patch makes the app use this information,
removing all hardcoded values.
User now needs to create the virtual crypto devices
or bind the HW crypto devices, and the app will use
the ones capable of performing the crypto op specified
(user can select between HW/SW through command line)
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Added cipher-only, hash-only operation cases,
which will be supported in the future.
Also, only sets authentication and ciphering parameters
when needed.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
So far, L2fwd crypto app could parse cipher, auth keys
and IV, but not AAD (additional authentication data).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Implement key parsing functionality, so user can provide
auth and cipher keys, plus IV, from the command line.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Min Cao <min.cao@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Sample app implementing an IPsec Security Geteway.
The main goal of this app is to show the use of cryptodev framework
in a "real world" application.
Currently only supported static IPv4 ESP IPsec tunnels for the following
algorithms:
- Cipher: AES-CBC, NULL
- Authentication: HMAC-SHA1, NULL
Not supported:
- SA auto negotiation (No IKE implementation)
- chained mbufs
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
As cryptodev library does not depend on mbuf_offload library
any longer, this patch removes it.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch modifies the crypto burst enqueue/dequeue APIs to operate on bursts
rte_crypto_op's rather than the current implementation which operates on
rte_mbuf bursts, this simplifies the burst processing in the crypto PMDs and the
use of crypto operations in general, including new functions for managing
rte_crypto_op pools.
These changes continues the separation of the symmetric operation parameters
from the more general operation parameters, which will simplify the integration
of asymmetric crypto operations in the future.
PMDs, unit tests and sample applications are also modified to work with the
modified and new API.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Remove unused phys_addr field from key in crypto_xform,
simplify struct and fix knock-on impacts in l2fwd-crypto app
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
This patch splits symmetric specific definitions and
functions away from the common crypto APIs to facilitate the future extension
and expansion of the cryptodev framework, in order to allow asymmetric
crypto operations to be introduced at a later date, as well as to clean the
logical structure of the public includes. The patch also introduces the _sym
prefix to symmetric specific structure and functions to improve clarity in
the API.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Two new pipeline API functions have been added to the library. The packet
hijack API function can be called by any input/output port or table action
handler to remove selected packets from the burst of packets read from one
of the pipeline input ports and then either send these packets out through
any pipeline output port or drop them.
Another packet drop API function can be used by the pipeline action
handlers (port in/out, table) to drop the packets selected using packet
mask. This function updates the drop statistics counters correctly.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Currently, there is no mechanism that allows the pipeline ports (in/out)
and table action handlers to override the default forwarding decision
(as previously configured per input port or in the table entry). The port
(in/out) and table action handler prototypes have been changed to allow
pipeline action handlers (port in/out, table) to remove the selected
packets from the further pipeline processing and to take full ownership
for these packets. This feature will be helpful to implement functions
such as exception handling (e.g. TTL =0), load balancing etc.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
A new rte_lpm_config structure is used so LPM library will allocate
exactly the amount of memory which is necessary to hold application’s
rules.
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
This patch extend next_hop field from 8-bits to 24-bits in LPM library
for IPv4.
Added versioning symbols to functions and updated
library and applications that have a dependency on LPM library.
Signed-off-by: Michal Kobylinski <michalx.kobylinski@intel.com>
Acked-by: David Hunt <david.hunt@intel.com>
This patch adds link identification feature to packet framework. To
identify a link, user can use both existing port-mask option, or specify
PCI device in every LINK section in the configuration file.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch adds CPU utilization measurement and idle cycle rate
computation to packet framework. The measurement is done by measuring
the cycles spent while a thread pulls zero packet from RX queue. These
cycles are treated as idle cycles (or headroom). A CLI command is added
to display idle cycle rate of specific thread. The CLI command format is
shown as following:
t <thread_id> headroom
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Current implementation of Exact-Match uses different execution path than
for LPM. Unifying them allows to reuse big part of LPM code and sightly
increase performance of Exact-Match.
Main changes:
-------------
* Packet classification stage is separated from the rest of path for both
LPM and EM.
* Packet processing, modifying and transmit part is the same for LPM and EM
and mostly based on the current LPM implementation.
* Shared code is moved to the common file "l3fwd_sse.h".
* While sequential packet classification in EM path, seems to be faster
than using multi hash lookup, used before, it is used by default. Old
implementation is moved to the file l3fwd_em_hlm_sse.h and can be enabled
with HASH_LOOKUP_MULTI global define in compilation time.
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This patch adds new function rte_jobstats_abort.
It marks *job* as finished and time of this work will be add to management
time instead of execution time.
This function should be used instead of rte_jobstats_finish if condition
occurs, condition is defined by the application for example when receiving
n>0 packets.
Example of usage is added to the example l2fwd-jobstats.
At maximum load do-while loop inside Idle job will be execute once because
one or more jobs waiting to be executed, so this time should not be include
as the execution time by calling rte_jobstats_abort().
Signed-off-by: Marcin Kerlin <marcinx.kerlin@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Issue description: when packets go through vhost example to virtio
device and come back to another virtio device or physical NIC, the
sequence of packets will be changed.
Reported-by: Thomas Long <thomas.long@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
How to reproduce:
1. Start vhost-switch
./examples/vhost/build/vhost-switch -c 0x3 -n 4 -- -p 1 --stat 0
2. Start VM with a virtio port
$ $QEMU -smp cores=2,sockets=1 -m 4G -cpu host -enable-kvm \
-chardev socket,id=char1,path=<path to vhost-user socket> \
-device virtio-net-pci,netdev=vhostuser1 \
-netdev vhost-user,id=vhostuser1,chardev=char1
-object memory-backend-file,id=mem,size=4G,mem-path=<hugetlbfs path>,share=on \
-numa node,memdev=mem -mem-prealloc \
-hda <path to VM img>
3. Start l2fwd in VM
$ ./examples/l2fwd/build/l2fwd -c 0x1 -n 4 -m 1024 -- -p 0x1
4. Use ixia to inject packets in a small data bit rate.
Error:
vhost-switch keeps printing error message:
failed to allocate memory for mbuf.
Root cause:
How many mbufs allocated for a port is calculated by below formula.
NUM_MBUFS_PER_PORT = ((MAX_QUEUES*RTE_TEST_RX_DESC_DEFAULT) + \
(num_switching_cores*MAX_PKT_BURST) + \
(num_switching_cores*RTE_TEST_TX_DESC_DEFAULT) +\
(num_switching_cores*MBUF_CACHE_SIZE))
We suppose num_switching_cores is 1 and MBUF_CACHE_SIZE is 128.
And when initializing port, master core fills mbuf mempool cache,
so there would be some left in that cache, for example 121.
So total mbufs which can be used is:
(MAX_PKT_BURST + MBUF_CACHE_SIZE - 121) = (32 + 128 - 121) = 39.
What makes it worse is that there is a buffer to store mbufs
(which will be tx_burst to physical port), if it occupies some mbufs,
there will be possible < 32 mbufs left, so vhost dequeue prints out
this msg.
In all, it fails to include master core's mbuf mempool cache.
Reported-by: Qian Xu <qian.q.xu@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
The main problem with l3fwd is that it is too monolithic with everything
being in one file, and the various options all controlled by compile time
flags. This means that it's hard to read and understand, and when making
any changes, you need to go to a lot of work to try and ensure you cover
all the code paths, since a compile of the app will not touch large parts
of the l3fwd codebase.
Following changes were done to fix the issues mentioned above
- Split out the various lpm and hash specific functionality into separate
files, so that l3fwd code has one file for common code e.g. args
processing, mempool creation, and then individual files for the various
forwarding approaches.
Following are new file lists
main.c (Common code for args processing, memppol creation, etc)
l3fwd_em.c (Hash/Exact match aka 'EM' functionality)
l3fwd_em_sse.h (SSE4_1 buffer optimizated 'EM' code)
l3fwd_lpm.c (Longest Prefix Match aka 'LPM' functionality)
l3fwd_lpm_sse.h (SSE4_1 buffer optimizated 'LPM' code)
l3fwd.h (Common include for 'EM' and 'LPM')
- The choosing of the lpm/hash path should be done at runtime, not
compile time, via a command-line argument. This will ensure that
both code paths get compiled in a single go
Following examples show runtime options provided
Select 'LPM' or 'EM' based on run time selection f.e.
> l3fwd -c 0x1 -n 1 -- -p 0x1 -E ... (EM)
> l3fwd -c 0x1 -n 1 -- -p 0x1 -L ... (LPM)
Options "E" and "L" are mutualy-exclusive.
If none selected, "L" is default.
Signed-off-by: Ravi Kerur <rkerur@gmail.com>
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Tested-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
cryptodev_aesni_mb_init was returning the device id of
the device just created, but rte_eal_vdev_init
(the function that calls the first one), was expecting 0 or
negative value.
This made impossible to create more than one aesni_mb device
from command line.
Fixes: 924e84f873 ("aesni_mb: add driver for multi buffer based crypto")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Reset total statistics (sum of all port statistics) before
adding up the new accumulated statistics per port.
Fixes: 387259bd6c ("examples/l2fwd-crypto: add sample application")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
The vhost_net_device_ops indirection is unnecessary because there is only
one implementation of the vhost common code.
Removing it makes the code more readable.
Signed-off-by: Rich Lane <rich.lane@bigswitch.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Change the codes in vhost sample to test virtio offload feature.
These changes include,
1. add two test options: tx-csum and tso.
2. add virtio_tx_offload() function to test vhost TX offload feature
for VM to NIC case;
however, for VM to VM case, it doesn't need to call this function,
the reason is explained in patch 2.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Remove the ipv4_hdr structure defination in vhost sample.
The same structure has already defined in the rte_ip.h file, so we
remove the defination from the sample, and include that header file.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
When building for ARM some examples were failing to compile because
of some dependencies disabled.
Declaring these dependencies prevent from trying to compile some
not supported examples.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
When building for ARM, the spinlock structure was not found.
It appears to be a mismatch with rwlock which is not used in this file.
Fixes: bda68ab9d1 ("examples/ethtool: add user-space ethtool sample application")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Remy Horton <remy.horton@intel.com>
The compiler cannot use _mm_crc32_u64:
examples/ip_pipeline/pipeline/hash_func.h:165:9:
error: implicit declaration of function '_mm_crc32_u64' is invalid in C99
Fixes: 947024a26d ("examples/ip_pipeline: rework passthrough pipeline")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
clang reports this error:
examples/l3fwd/main.c:550:1: error: unused function 'send_packetsx4'
The function is used only when ENABLE_MULTI_BUFFER_OPTIMIZE is 1.
Fixes: 96ff445371 ("examples/l3fwd: reorganise and optimize LPM code path")
Fixes: 6f1c1e28d9 ("examples/l3fwd: fix build with exact-match enabled")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
_mm_prefetch is defined only in x86 compilers.
Use rte_prefetch_non_temporal() abstraction instead of _mm_prefetch(x, 0)
to in-order to build distributor application for non x86 platforms
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
The file rte_config.h is automatically generated and included.
No need to #include it.
The example performance-thread needs a makefile fix to avoid
overwriting the default cflags.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
It was requested by Intel, more than one year ago, to replace the name
"Intel DPDK" by "DPDK".
Some references to the old name were still in some docs and code comments,
leading to confusion.
Fixes: ac8ada004c ("doc: remove Intel references from release notes")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
fix the error reported by checkpatch:
"ERROR: return is not a function, parentheses are not required"
remove parentheses in return like:
"return (logical expressions)"
remove parentheses in return a function like:
"return (rte_mempool_lookup(...))"
Fixes: 6307b909b8 ("lib: remove extra parenthesis after return")
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Handle SIGINT and SIGTERM in l3fwd.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Handle SIGINT and SIGTERM in l2fwd.
Signed-off-by: Zhihong Wang <zhihong.wang@intel.com>
Acked-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
test_mp_secondary was initially added by mistake.
rte_snprintf has been removed.
Fixes: 9d41beed24 ("lib: provide initial versioning")
Fixes: 3185322809 ("eal: remove rte_snprintf")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
This patch includes the configuration and script files of the some
applications which can be built using DPDK Packet Framework. A
configuration file defines the application structure which include
packet processing stages (knowns as pipelines), their connectivity
and other parameters necessary to start and run the application. A
script file specifies CLI commands required for loading table entries
(rules/routes, etc). The configuration/script files for simple
applications such as l2 forwarding, l3 forwarding have been presented.
In addition, to demonstrate the use and inter-connectivity of various
pipeline modules (which are avilable in packet framework), a complex
packet processing workload i.e. edge router is considered. The
configuration of the pipeline stages used for upstream and downstream
flow processing has been specified separately in two configuration
files. All these configuration and script files don't affect the
compilation.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
examples/netmap_compat/bridge/../lib/compat_netmap.c:880:41:
error: ‘POLLRDNORM’ undeclared (first use in this function)
The root casue is POLLRDNORM is more-or-less nonstandard, and it
depends on macro "__USE_XOPEN".
In suse11 sp3, POLLRDNORM will not be defined because "__USE_XOPEN"
issue.
This patch add check if it is not defined, define it.
Fixes: 06371afe39 (examples/netmap_compat: import netmap compatibility example)
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
The patch fixes an inverted return value in the
cond_destroy and cond_init APIs of the pthread shim
example.
These APIs are now demonstrated in the sample app by
having the mutexes and condition variables
explicitly destroyed before the appplication terminates.
Fixes: 433ba6228f ("add pthread_shim app")
Signed-off-by: Ian Betts <ian.betts@intel.com>
This commit removes the performance thread example from
examples/Makefile, and marks the example as "experimental"
in the release note, and it its API headers files.
Signed-off-by: Ian Betts <ian.betts@intel.com>
This commit adds an example that illustrates how to implement
a pthread shim with the lthread subsystem included in the
performance thread example application.
Signed-off-by: Ian Betts <ian.betts@intel.com>
Acked-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
This commit adds an L3 forwarding application to the performace-thread
example.
Signed-off-by: Ian Betts <ian.betts@intel.com>
Acked-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
This commit adds the lightweight thread subsystem used by the
performance-thread sample applications.
Signed-off-by: Ian Betts <ian.betts@intel.com>
Acked-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Add #ifndef MAX_QUEUES to change MAX_QUEUES at compile time if needed.
Change MAX_QUEUES from 512 to 128 to reduce the number of hugepages
required by the vhost-switch program.
To change MAX_QUEUES add '-D MAX_QUEUES=512' to the EXTRA_CFLAGS variable,
before building the application.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Fix Coverity warning with potential 32-bit integer multiplication overflow
where final result is expected to be 64-bit.
>>> CID 120144 (#1 of 1): Unintentional integer overflow (OVERFLOW_BEFORE_WIDEN)
Fixes: e64833f227 ("examples/l2fwd-keepalive: add sample application")
Signed-off-by: Remy Horton <remy.horton@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Fix Coverity warning with uninitialised field in structure being used.
Zero out all the other unused ones.
>>> CID 120413 (#1 of 1): Uninitialized scalar variable (UNINIT)
Fixes: bda68ab9d1 ("examples/ethtool: add user-space ethtool sample application")
Signed-off-by: Remy Horton <remy.horton@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Fixes following error on gcc 4.4.7:
examples/vhost/main.c: In function ‘new_device’:
rte_ring.h:740: error:
dereferencing pointer ‘mbuf.486’ does break strict-aliasing rules
examples/vhost/main.c:1503: note: initialized from here
...
rte_ring.h:740: error:
dereferencing pointer ‘({anonymous})’ does break strict-aliasing rules
examples/vhost/main.c:1804: note: initialized from here
Fixes: d19533e8 ("examples/vhost: copy old vhost example")
Reported-by: Qian Xu <qian.q.xu@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
Compile ip_pipeline in CentOS 6.5 with kernel 2.6.32-431
GCC 4.4.7, will lead below error:
pipeline_routing_be.c: In function ‘pipeline_routing_msg_req_arp_add_handler’:
pipeline_routing_be.c:1817: error: dereferencing pointer ‘({anonymous})’
does break strict-aliasing rules
This because the code break strict-aliasing rule.
The patch solve this issue.
Fixes: 0ae7275810 (examples/ip_pipeline: add more functions to routing pipeline)
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
Acked-by: Jasvinder Singh <jasvinder.singh@intel.com>
This patch fixes build errors on linux kernels such as
SuSE 11-SP2/3(64 bits), etc.
Error Log:
error: implicit declaration of function 'WIFEXITED'
error: implicit declaration of function 'WEXITSTATUS'
Fixes: ed0b2d0201 ("examples/ip_pipeline: add more ports")
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The source and destination both are the arrays of cmdline_parse_ctx_t.
So the goal is to copy elements size of cmdline_parse_ctx_t not
cmdline_parse_ctx_t*.
CID 120412: Code maintainability issues (SIZEOF_MISMATCH)
Passing argument "&app->cmds[app->n_cmds]" of type "cmdline_parse_ctx_t *"
and argument "n_cmds * 8UL /* sizeof (cmdline_parse_ctx_t *) */"
to function "memcpy" is suspicious.
In this case, "sizeof (cmdline_parse_ctx_t *)" is equal to
"sizeof (cmdline_parse_ctx_t)", but this is not a portable assumption.
Coverity issue: 120412
Fixes: b4aee0fb9c ("examples/ip_pipeline: reconfigure thread binding dynamically")
Fixes: ea0908c4ab ("examples/ip_pipeline: add master pipeline")
Fixes: eb32fe7c55 ("examples/ip_pipeline: rework initialization parameters")
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Further enhancements to the userspace ethtool implementation that was
submitted in 2.1 and packaged as a self-contained sample application.
Implements an rte_ethtool shim layer based on rte_ethdev API, along
with a command prompt driven demonstration application.
Signed-off-by: Remy Horton <remy.horton@intel.com>
virNodeGetCPUMap introduced in libvirt 1.0. In some linux distributions
like Ubuntu12/14 and Fedora18, libvirt version is older than 1.0. So this
sample will not build pass.
Replace "virNodeGetCPUMap" with another libvirt API "virNodeGetInfo".
Signed-off-by: Marvin Liu <yong.liu@intel.com>
When first adding flow actions pipeline, some files were not pushed
to the repository by mistake. The original commit message is below.
Fixes: 9ef2593651 ("examples/ip_pipeline: add flow actions pipeline")
Flow actions pipeline is an extension of flow-classification pipeline.
Some of the operations of flow classification pipeline such as traffic
metering/marking(for e.g. Single Rate Three Color Marker (srTCM), Two
Rate Three Color Marker trTCM)), policer can be performed separately in
flow action pipeline to avoid excessive computational burden on the CPU
core running the flow-classification pipeline. The Flow action pipeline
implements various function such as traffic metering, policer, stats.
Traffic mettering can configured as per the required context, for
examples- per user, per traffic class or both. These contexts can be
applied by specifying parameters in configuration file as shown below;
[PIPELINE1]
type = FLOW_ACTIONS
core = 1
pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0
n_flows = 65536
n_meters_per_flow = 1
flow_id_offset = 158
ip_hdr_offset = 142
color_offset = 64
The entries of flow and dscp tables of flow actions pipeline can be
modified through command-line interface. The commands to add or delete
entries to the flow table, DSCP(differentiated services code point)
table and for statistics collection, etc have been included. The key
functions such as Traffic Metering/marking and policer functions have
been implemented as flow-table action handler.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The standard for DPDK is to use memset() not bzero which
is a leftover BSD-ism.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
l3fwd app expects PMDs to return packets whose L2 header is
16-byte aligned due to usage of _mm_load_si128()/_mm_store_si128()
intrinsics in the app. However, most of the protocol stacks expects
packets such that its IP/L3 header be aligned on a 16-byte boundary.
Based on the recommendations received on dpdk-dev, we are changing
the l3fwd app to use _mm_loadu_si128()/_mm_loadu_si128() so that the
address need not be 16-byte aligned and thereby preventing crash.
We have tested that there is no performance impact due to this
change.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Lookup burst size was changed for exact match
from 4 to 8, for both ipv4 and ipv6, but actually only
4 keys were being looked up for ipv6, instead of 8,
causing random segmentation faults.
Fixes: 80fcb4d4 ("examples/l3fwd: increase lookup burst size to 8")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Reshma Pattan <reshma.pattan@intel.com>
Fix minor, and non critical, copy and paste error in strncmp() of eth-dest
commandline argument.
Fixes: bd785f6f67 ("examples/l3fwd: make destination mac address configurable")
Signed-off-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Andrey Chilikin <andrey.chilikin@intel.com>
passing -t 0 as a command line argument causes the application
to exit with an "invalid refresh period specified" error which is
contrary to applications help text.
This patch removes the unnecessary option "--no-stats" and fixes the
behaviour of the -t parameter.
Fixes: 387259bd6c ("examples/l2fwd-crypto: add sample application")
Reported-by: Min Cao <min.cao@intel.com>
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
examples/vhost_xen/main.c:659:61: error: has no member named data
rte_memcpy((void *)(uintptr_t)buff_addr, (const void*)buff->data, rte_pktmbuf_data_len(buff));
^
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
This issue was discovered under the case of software vm2vm
fowarding. When pkts are received from virtio device 0 and
tx_route to virtio device 1, tx of device 0 is not updated.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Tested-by: Qian Xu <qian.q.xu@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Macro MAX_QUEUES was defined to 128, only allow 16 vmdq_pools in theory.
When running vmdq_app with more than 34 vmdq_pools, it will cause the
core_dump issue.
Change MAX_QUEUES to 1024 will solve this issue.
Signed-off-by: Xutao Sun <xutao.sun@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Error:
examples/bond/main.c:431:24: error: use of undeclared identifier 'AF_INET'
AF_INET defined in sys/socket.h
This header included for Linux:
. /<snip>/include/rte_ip.h
.. /usr/include/netinet/in.h
... /usr/include/sys/socket.h
But not for FreeBSD:
. /<snip>/include/rte_ip.h
.. /usr/include/netinet/in.h
... /usr/include/machine/endian.h
... /usr/include/netinet6/in6.h
. /<snip>/include/rte_tcp.h
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Flow actions pipeline is an extension of flow-classification pipeline.
Some of the operations of flow classification pipeline such as traffic
metering/marking(for e.g. Single Rate Three Color Marker (srTCM), Two
Rate Three Color Marker trTCM)), policer can be performed separately in
flow action pipeline to avoid excessive computational burden on the CPU
core running the flow-classification pipeline. The Flow action pipeline
implements various function such as traffic metering, policer, stats.
Traffic mettering can configured as per the required context, for
examples- per user, per traffic class or both. These contexts can be
applied by specifying parameters in configuration file as shown below;
[PIPELINE1]
type = FLOW_ACTIONS
core = 1
pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0
n_flows = 65536
n_meters_per_flow = 1
flow_id_offset = 158
ip_hdr_offset = 142
color_offset = 64
The entries of flow and dscp tables of flow actions pipeline can be
modified through command-line interface. The commands to add or delete
entries to the flow table, DSCP(differentiated services code point)
table and for statistics collection, etc have been included. The key
functions such as Traffic Metering/marking and policer functions have
been implemented as flow-table action handler.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This commit add to CLI command check for pipeline type. It prevents
running CLI commands on not supported pipeline types.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Up till now pipeline was bound to thread selected in the initial config.
This patch allows binding pipeline to other threads at runtime using CLI
commands.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch adds following features to the
routing-pipeline to enable it for various NFV
use-cases;
1.Fast-path ARP table enable/disable
2.Double-tagged VLAN (Q-in-Q) packet enacapsulation
for the next-hop
3.MPLS encapsulation for the next-hop
4.Add colour (Traffic-class for QoS) to the MPLS tag
5.Classification action to select the input queue
of the hierarchical schedular (QoS)
The above proposed features can be enabled
(or disabled) through the parameters specified
in configuration file as below;
[PIPELINE0]
type = ROUTING
core = 1
pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0
n_routes = 4096
n_arp_entries = 1024
ip_hdr_offset = 142
arp_key_offset = 64
l2 = qinq
qinq_sched = no
The LPM table entries might include additional
fields depending upon the packet encapsulation
(Q-in-Q, MPLS)for the next-hop. The CLI
commands for adding or deleting such entries
to LPM table have been implemented. Action
handlers for QinQ and MPLS encapsulation,
classification action to select the input queue
of the hierarchical schedular(QoS) and adding
colour (Traffic-class for QoS) to the MPLS
tag have been implemented.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch adds flow id field to the flow
classification table entries and adds table action
handlers to read flow id from table entry and
write it into the packet meta-data. The flow_id
(32-bit) parameter is also added to CLI commands
flow add, flow delete, etc.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch implements a generic approach to
extract fields from the packet's header and
copying them to packet metadata. The fields
are selected at the desired offset on the basis
of the mask specified in application configuration
file. The extracted fields, for instance, can be
used to compute hash for the lookup table. This
feature exposes more flexibility to the users as
they will be able to employ new protocol headers
and specify the required fields to be extracted.
The above feature has been implemented as port_in
action handler of the passthrough pipeline. The
example of the configuration file for passthrough
pipeline is as below;
[PIPELINE1]
type = PASS-THROUGH
core = 1
pktq_in = RXQ0.0 RXQ1.0 RXQ2.0 RXQ3.0
pktq_out = TXQ0.0 TXQ1.0 TXQ2.0 TXQ3.0
dma_size = 16
dma_dst_offset = 64
dma_src_offset = 150
dma_src_mask = 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF
dma_hash_offset = 80
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch checks that rx queue and tx queue of each
link specified in ip pipeline configuration file are
used.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch allows parser to read promisc entry from
the LINK section defined in configuration file. It
is an optional parameter: if present, value should
be read (yes/no, on/off), else the value is the
default value (i.e. 1 = promiscuous mode on)
Example of config file:
[LINK0]
promisc = no; optional parameter, default value is “yes”
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Fixes the wrong source port mempool assignment (commit id eb32fe7c).
The source port is now assigned by parsed mempool id index value either by
default or configured by CFG file.
Previously, the mempool id for locating source port's mempool pointer was
the port id. When multiple source ports exist in the same pipeline, and
the default mempool configuration is used (one MEMPOOL0 is shared between
all source ports), the invalid mempool pointer (NULL) will be assigned to
source ports other than first source port.
Fixes: eb32fe7c55 ("examples/ip_pipeline: rework initialization parameters")
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
examples/distributor/main.c(338): error #167:
argument of type "struct rte_mbuf *"
is incompatible with parameter of type "const char *"
The first param passed to _mm_prefetch is wrong,
need convert "struct rte_mbuf *" to "void *".
Fixes: 07db4a9750 ("examples/distributor: new sample app")
Signed-off-by: Michael Qiu <michael.qiu@intel.com>
This patch updates the flow_classification pipeline for added key_mask
parameter in 8/16-byte key hash parameters. The update provides user
optional key_mask configuration item applying to the packets.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch adds parse_hex_string function to parse hex string to uint8_t
array.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Added two new cli commands to firewall pipeline. Commands bulk add and
bulk delete takes as argument a file with rules to add/delete. The file
is parsed, and then rules are passed to backend functions which
add/delete records from pipeline tables.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add integrated MP/MC and fragmentation/reassembly support to SWQs
Signed-off-by: Piotr Azarewicz <piotrx.t.azarewicz@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
This patch creates a new sample applicaiton based off the l2fwd
application which performs specified crypto operations on IP packet
payloads which are forwarding.
Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
pthread_setname_np() function added in glibc 2.12, using this function
in older glibc versions cause compile error:
error: implicit declaration of function "pthread_setname_np"
This patch adds "rte_thread_setname" macro and set it according
glibc >= 2.12 check, thread naming disabled for older glibc versions,
glibc versions that support "pthread_setname_np" will keep using this
function.
Fixes: 67b6d3039e ("eal: set name to threads")
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Add a sample application that acts as a PTP slave using the
DPDK ieee1588 functions.
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Reviewed-by: John McNamara <john.mcnamara@intel.com>
This patch adds support for pthread_setname_np on Linux and
pthread_set_name_np on FreeBSD.
Signed-off-by: Ravi Kerur <rkerur@gmail.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
[Thomas: add name in tep_termination example]
This is a supplement for previous patch that was incomplete.
Previous commit message: This is a modification of qos_sched
example to use librte_cfgfile for parsing configuration file.
Fixes: db935d0171 ("examples/qos_sched: use librte_cfgfile")
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
LPM table and pipeline apps have been modified to
include name parameter of the lpm table.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
According to eventfd man page:
typedef uint64_t eventfd_t;
int eventfd_read(int fd, eventfd_t *value);
int eventfd_write(int fd, eventfd_t value);
eventfd_t is defined for the second arg(value), but not for fd.
Here I redefine those fd fields to `int' type, which also removes
the redundant (int) cast. And as the man page stated, we should
cast 1 to eventfd_t type for eventfd_write().
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
The functions and structures are moved to app/test in order to keep
existing unit tests. Some minor changes were done in these functions
because of library scope restrictions.
An enum is also copied in two other applications to keep existing code.
The library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The extended unified packet type is now part of the standard ABI.
As mbuf struct is changed, the mbuf library version is incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
The Rx interrupt feature is now part of the standard ABI.
Because of changes in rte_intr_handle and struct rte_eth_conf,
the eal and ethdev library versions are incremented.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Host cpu mapping structure can only support 64 cpus. When run vm_power sample
on platform with more than 64 cpus, will generate improper physical core mask.
After limited supported host cpus to 64 will fix this issue.
Fixes: e9f64db946 ("examples/vm_power: show warning when more than 64 cores")
Signed-off-by: Marvin Liu <yong.liu@intel.com>
When using VM power manager app on systems with more than 64 cores,
app could not run even though user does not use cores 64 or higher.
The problem happens only in that case, in which case it will result
in an undefined behaviour.
Thefere, this patch allows the user to run the app on a system with more
than 64 cores, warning the user not to use cores higher than 64 in the VM(s).
Add new known issue where VM power manager app may not work
in a system with more than 64 cores, in release notes.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Tested-by: Marvin Liu <yong.liu@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
L3fwd was trying to use an inexistent function "simple_ipv6_fwd_4pkts",
instead it should be "simple_ipv6_fwd_8pkts", and "simple_ipv8_fwd_4pkts"
instead of "simple_ipv4_fwd_8pkts".
clang reports some unused functions, used only for LPM lookup:
examples/l3fwd/main.c:545:1: error: unused function 'send_packetsx4'
examples/l3fwd/main.c:1165:1: error: unused function 'rfc1812_process'
Fixes: 80fcb4d4 ("examples/l3fwd: increase lookup burst size to 8")
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
[Thomas: more #if to fix clang warnings]
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
For consistency, RTE_LOG macro should be used instead of rte_log function.
The macro can be pruned at build time, though these logs have a high level
and should not pruned.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
The patch demonstrates how to handle per rx queue interrupt in a NAPI-like
implementation in userspace. The working thread mainly runs in polling mode
and switch to interrupt mode only if there is no packet received in recent polls.
The working thread returns to polling mode immediately once it receives an
interrupt notification caused by the incoming packets.
The sample keeps running in polling mode if the binding PMD hasn't supported
the rx interrupt yet. Now only ixgbe(pf/vf) and igb support it.
Signed-off-by: Danny Zhou <danny.zhou@intel.com>
Signed-off-by: Cunming Liang <cunming.liang@intel.com>
With the new hash implementation, the minimum lookup burst size
to get good performance is 8, since its internal pipeline
consists of 4 stages of 2 entries each, so to avoid
duplication, burst size should be 8 or more entries.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
This patch fixes parsing value of core variable in pipeline config.
Before not every combination of cores (c), sockets (s) and
hyperthreading (h) was parsed correctly.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The following commit broke vhost sample when it runs in second time:
292959c719
It should call api to unregister vhost driver when sample exit/quit, then
the socket file will be removed(by calling unlink), and thus make vhost sample
work correctly in the second time startup.
Test report: http://dpdk.org/ml/archives/dev/2015-July/020896.html
Fixes: 292959c719 ("vhost: cleanup unix socket")
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
It fixes the wrong log info when failing to unregister vhost driver.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
Acked-by: Huawei Xie <huawei.xie@intel.com>
To unify packet types among all PMDs, bit masks of packet type for
'ol_flags' are replaced by unified packet type.
To avoid breaking ABI compatibility, all the changes would be
enabled by RTE_NEXT_ABI.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
The cuckoo hash has a fixed number of entries per bucket, so the
configuration parameter for this is unused. We change this field in the
parameters struct to "reserved" to indicate that there is now no such
parameter value, while at the same time keeping ABI consistency.
Fixes: 48a3991196 ("hash: replace with cuckoo hash implementation")
Suggested-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Created new folder for config(.cfg) and script(.sh) files.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Master pipeline is responsible for command line handling and
communicationg with all other pipelines via message queues. Removed
cmdline.c file, as its functionality will be split over multiple
pipeline files.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Moved pipelines to separate folder, removed not needed pipelines and
modified Makefile to match that change.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
After changes in config parser, app params struct is changed and
requires modifications in initialization procedures.
Signed-off-by: Maciej Gajdzica <maciejx.t.gajdzica@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
After loading configuration from a file, data integrity is checked.
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
New syntax of config files is needed for ip_pipeline example
enhancements. Some old files are temporarily disabled in the Makefile.
It is part of a bigger change.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
The outer vlan should be copied from source packet buffer to
support double vlan stripping and insertion, as double vlan can be
stripped or inserted by some of NIC hardware.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
This patch simply applies the transform previously committed in
scripts/cocci/mtod-offset.cocci. No other modifications have been
made here.
Signed-off-by: Cyril Chemparathy <cchemparathy@ezchip.com>
Acked-by: Olivier Matz <olivier.matz@6wind.com>
Add the encapsulation and decapsulation options.
The two flags are enabled by default.
Sometimes we want to know the performance influence of
the encapsulation and decapsulation operations, and
I think we should add the two configuration options.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Add the bad Rx checksum statistics of inner IP and L4.
The number of packets with bad RX IP and L4 checksum in inner header is recorded.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Add the tso-segsz option for TSO offload.
If the 'tso-segsz' is not 0, it means TSO offload is enabled.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Add Tx checksum offload configuration for inner header.
For UDP tunneling packet, the inner Tx checksum offload means
inner IPv4 and inner L4(TCP/UDP/SCTP).
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Add the filter types for VXLAN packet.
The following filter type are added here.
- Inner MAC&VLAN and tenant ID
- Inner MAC and tenent ID, and Outer MAC
- Inner MAC and tenant ID
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Implement the VXLAN packet processing functions.
- VXLAN port configuration
- VXLAN tunnel setup
- VXLAN tunnel destroying
- VXLAN packet processing for Rx side
- VXLAN packet processing for Tx side
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Thomas Long <thomas.long@intel.com>
Add the common APIs of tunneling packet processing.
We are trying to create a framework for tunneling packet processing, which includes
- Tunnel port configuration
- Tunnel setup
- Tunnel destroying
- Tunneling packet processing for Rx side
- Tunneling packet processing for Tx side
- Tunnel parameter processing
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Thomas Long <thomas.long@intel.com>
Add some basic VXLAN definitions in vxlan.h file.
It includes VXLAN port information and VXLAN device structures.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Signed-off-by: Thomas Long <thomas.long@intel.com>
This patch creates the virtio devices management mechanism.
These functions are from the vHost example, which include:
- virtio device creation.
- virtio device destroying.
- virtio device maintenance.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
[Thomas: remove unused function validate_nb_devices()]
[Thomas: add maintainers section]
The macro to turn on additional debug output when the app was compiled
with "-DDEBUG" was missing a ";".
Fixes: 07db4a9750 ("examples/distributor: new sample app")
Signed-off-by: Anbarasan Murugesan <anbarasanx.murugesan@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This is a modification of qos_sched example to use
librte_cfgfile for parsing configuration file.
Signed-off-by: Michal Jastrzebski <michalx.k.jastrzebski@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Add a command-line parameter to l3fwd, to allow the user to specify the
destination mac address for each ethernet port used.
Signed-off-by: Andrey Chilikin <andrey.chilikin@intel.com>
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Do not compile these examples if the related dpdk option is not
enabled, as it's done for other examples. It allows to build
the examples directory with a reduced dpdk configuration.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Fix a cast issue:
examples/netmap_compat/lib/compat_netmap.c:827:10: error: cast to
pointer from integer of different size [-Werror=int-to-pointer-cast]
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
