When using _mm_set_epi64() rather than _mm_set_epi64x() intrinsic, ICC
tries to use the x87 floating point registers, leading to warnings about
not properly clearing value when switching between x87 and SSE/AVX modes.
error #13203: No EMMS instruction before call to function
Fix this by using the set64x() intrinsic.
Fixes: 0a92e63fc4cd ("raw/ioat: add local API to perform copies")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Tested-by: Anatoly Burakov <anatoly.burakov@intel.com>
Enable an example for rawdev ntb. Support interactive mode to send
file on one host and receive file from another host. The command line
would be 'send [filepath]' and 'receive [filepath]'.
But since the FIFO is not enabled right now, use rte_memcpy as the enqueue
and dequeue functions and only support transmitting file no more than 4M.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add handshake process using doorbell so that two hosts can
communicate to start and stop.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Add in the list of registers for the device.
And enable NTB device ops for Intel Skylake platform.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Introduce rawdev driver support for NTB (Non-transparent Bridge) which
can help to connect two separate hosts with each other.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Sample test to verify DMA functionality, this test covers
internal transfer mode.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Send message to PF to stop DMA queue when device close is
called from application.
Defined the required data structures to support enqueue and
dequeue APIs.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Register dev_configure API to configure DPI PCI devices.
After successful initialization send message to PF to open
corresponding DPI DMA queue. At present hardware doesn't
support mail box for DPI, so PMD to PF communication uses
pre build kernel devfs.
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Add the make and meson based build infrastructure along
with the DMA device probe with documentation infrastructure.
Signed-off-by: Jerin Jacob <jerinj@marvell.com>
Signed-off-by: Satha Rao <skoteshwar@marvell.com>
Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
cast unsigned int ports_per_retimer, unsigned int nums_retimer,
unsigned int nums_fvl and unsigned int ports_per_fvl to uint64_t
before multiply operation, to avoid Unintentional integer overflow.
Coverity issue: 337924, 337926
Fixes: d1cd4eb2d48e ("raw/ifpga: support ipn3ke")
Cc: stable@dpdk.org
Signed-off-by: Andy Pei <andy.pei@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Fix the readout retimer link status incorrectly when we
remove the linux intel-fpga-driver and run the DPDK application.
The linux driver will stop the retimer when remove the kernel
modules.
Fixes: 8a256bef ("raw/ifpga/base: add eth group driver")
Cc: stable@dpdk.org
Reported-by: Amrutha Sampath <amrutha.sampath@intel.com>
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Add local APIs to trigger data copies, and retrieve handle values once
those copies are completed. Included are unit tests to validate the data
is copies correctly.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Add stats functions to track what is happening in the driver, and put
unit tests to check those.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Allow initializing a driver instance. Include selftest to validate these
functions.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Add in the "info_get" function to the driver, to allow us to query the
device. This allows us to have the unit test pick up the presence of
supported hardware or not.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Add the create/destroy driver functions so that we can actually allocate
a rawdev and destroy it when done. No rawdev API functions are actually
implemented at this point.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Add in the list of registers for the device. File is taken from the SPDK
project:
https://github.com/spdk/spdk/blob/master/include/spdk/ioat_spec.h
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
Add stubs for ioat rawdev driver support in DPDK, specifically:
* makefile and meson build hooks
* initial public header file
* rawdev main C file, with probe and release functions
* release note update announcing the driver
* initial documentation for the new section in the rawdev doc
* unit test stubs for device unit tests
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jiayu Hu <jiayu.hu@intel.com>
Tested-by: Harry van Haaren <harry.van.haaren@intel.com>
For each driver where we optionally disable it, add in the reason why it's
being disabled, so the user knows how to fix it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Luca Boccassi <bluca@debian.org>
When running self-tests, the driver needs to know the device on which to
run the tests, so we need to take the device ID as parameter. Only the
skeleton driver is providing this selftest capability right now, so we can
easily update it for this change.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Use a variable value rather than compile-time constant zero as the
device id for the skeleton rawdev tests. This ensures we can make the
tests work even if other rawdevs are present.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Using memory on the stack instead of on the heap by calling malloc
also avoid memory leak in case of test case failures
Fixes: 88d0e47880ec ("raw/skeleton: fix memory leak on test failure")
Cc: stable@dpdk.org
Signed-off-by: Thinh Tran <thinhtr@linux.vnet.ibm.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The incriminated commit promoted this symbol as stable but the
prototype still has the tag.
Fixes: fb1a20331d70 ("raw/dpaa2_qdma: remove experimental tag from APIs")
Cc: stable@dpdk.org
Signed-off-by: David Marchand <david.marchand@redhat.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
In rte_fpga_do_pr() function, if 'stat' return error the
'file_fd' is never closed thus leading a fd leak.
This patch avoids this.
Coverity issue: 279441
Fixes: ef1e8ede3da59e ("raw/ifpga: add Intel FPGA bus rawdev driver")
Cc: stable@dpdk.org
Signed-off-by: Li Qiang <liq3ea@163.com>
Acked-by: Rosen Xu <rosen.xu@intel.com>
vdev driver names are not available in create if called from probe.
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
The code shall be unlock post the lock.
Fixes: c22fab9a6c34 ("raw/dpaa2_qdma: support configuration APIs")
Cc: stable@dpdk.org
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
GCC9 gives warnings if the parameter passed to printf for "%s" could be
NULL, so we need to add checks in some cases to ensure that is not the
case.
Fixes: 3298fa4853b8 ("raw/dpaa2_cmdif: introduce DPAA2 command interface driver")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
GCC9 gives warnings if the parameter passed to printf for "%s" could be
NULL, so we need to add checks in some cases to ensure that is not the
case.
Fixes: 61c592a8d035 ("raw/skeleton: introduce skeleton rawdev driver")
Cc: stable@dpdk.org
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Using prefix name "ifpga_" for feature and feature_ops data
struct on ifpga base code, which is suggested by Yigit, Ferruh.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
There is two eth group devices in PAC N3000 card,
each eth group include PHY device and MAC device. Exposing
APIs for DPDK PMD driver to access those devices.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
1. Add Altera I2C master device driver
2. Add at24 eeprom driver which is i2c slave device
3. Introducing a new ops for opae_manager: opae_manager_networking_ops.
This ops will include some networking operation by FPGA, like vBNG
operation, MAC ROM operation and so on.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
There is a SPI bus link between A10 FPGA and MAX10 FPGA.
MAX10 is in charge of board management, like power management,
sensors, flash devices.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Get private features attribute like size, id, address after
enumeration, and insert into FEM or Port dedicate list.
when initial the private feature driver, we just compare the
private feature id between the list and feature drivers array
to match the proper drivers.
This patch avoid the hardcore in feature_info array in previous
implementation. and the same time we can use one driver for mulitple
devices which the id is the same.
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
clean up code:
1. use opae_memcpy instead of memcpy
2. use opae_memset instead of memset
3. disable opae_adapter_dump by default
Signed-off-by: Tianfei Zhang <tianfei.zhang@intel.com>
Add support for route by port mode. The route by port
feature in HW helps in translating the PCI address
of connected device.
Signed-off-by: Minghuan Lian <minghuan.lian@nxp.com>
Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
This patch adds support the batch processing for the qdma jobs
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Signed-off-by: Yi Liu <yi.liu@nxp.com>
