Add a section in NIC drivers documentation to explain compiling and
testing of a PMD. It also mentions about host setup, which is required
before running testpmd.
Add label "testpmd_ug" to refer user guide.
Signed-off-by: Shijith Thotton <shijith.thotton@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch adds the NXP dpaa2 architecture and pmd details
in the Network interfaces section.
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Having packets received without any offload flags given in the mbuf is not
very useful, and performance tests with testpmd indicates little
benefit is got with the current code by turning off the flags. This makes
the build-time option pointless, so we can remove it.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Having packets received without any offload flags given in the mbuf is not
very useful, and performance tests with testpmd indicates little to no
benefit is got with the current code by turning off the flags. This makes
the build-time option pointless, so we can remove it.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Jianbo Liu <jianbo.liu@linaro.org>
Enable Arkville on supported configurations
Add overview documentation
Minimum driver support for valid compile
Arkville PMD is not supported on ARM or PowerPC at this time
Signed-off-by: Ed Czeck <ed.czeck@atomicrules.com>
Signed-off-by: John Miller <john.miller@atomicrules.com>
Seen with recent version of sphinx:
WARNING: latex_preamble conflicts with latex_elements['preamble'], ignored.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Tested-by: Ferruh Yigit <ferruh.yigit@intel.com>
Since VF can not disable/enable HW CRC strip for non-DPDK PF drivers,
and kernel driver almost default enable that feature, if disable it in
app's rxmode, VF driver will report the VF launch failure. So this
patch default to enable HW CRC strip to let VF launch successful.
Cc: stable@dpdk.org
Signed-off-by: Jeff Guo <jia.guo@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
NICs are available from Netcope under the names NFB-*.
Change names and direct the links to Netcope web.
Signed-off-by: Matej Vido <vido@cesnet.cz>
Acked-by: John McNamara <john.mcnamara@intel.com>
The first line of the MAINTAINERS file are:
"
The intention of this file is to provide a set of names that we can rely on
for helping in patch reviews and questions.
"
Unfortunately, some maintainers do not endorse their role for questions
asked on the mailing list.
Hope making it clear in the contribution guide will enforce more
responsive maintainer participation.
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
VFd (the VF daemon) is a mechanism which can be used to configure
features on a VF without direct access to the PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
TILE-GX is no longer supported but the tap driver includes it in its
NIC overview ini file which causes a doc warning:
$ make doc-guides-html
sphinx processing guides-html...
Warning generate_nic_overview_table():
Unknown feature 'TILE-Gx' in 'tap.ini'
Fixes: 04b2c3c943 ("doc: add tap features")
Signed-off-by: John McNamara <john.mcnamara@intel.com>
This patch deprecates the following functions in 17.05,
which will be removed in 17.08.
- rte_crpytodev_scheduler_mode_get()
- rte_crpytodev_scheduler_mode_set()
These two new functions replace them, fixing the typo in their names.
- rte_cryptodev_scheduler_mode_get()
- rte_cryptodev_scheduler_mode_set()
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Restructure QAT PMD instructions and add a device table to
minimise duplication for each device and make it easier to add devices.
Fix some device name typos and poor formatting.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
DOCSIS BPI mode is handled in the QAT PMD by sending full blocks to the
hardware device for encryption and using OpenSSL libcrypto for pre- or
post-processing of any partial blocks.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Adds support in OpenSSL PMD for algorithm following the DOCSIS
specification, which combines DES-CBC for full DES blocks (8 bytes)
and DES-CFB for last runt block (less than 8 bytes).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Deepak Kumar Jain <deepak.k.jain@intel.com>
Tested-by: Yang Gang <gangx.yang@intel.com>
Underlying IPSec Multi buffer library implements
DOCSIS specification, so this commit adds support
for this new feature, which combines AES-CBC for full
AES blocks (16 bytes) and AES-CFB for last runt block
(less than 16 bytes).
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
IPSec Multi-buffer library v0.45 has been released,
which includes, among other features, support for DOCSIS BPI
specification and include AVX512 optimizations.
This new version added const qualifiers to some of the function
prototypes, so the PMD has been updated to include these changes.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Fail-over mode works with 2 slaves, primary slave and secondary slave.
In this mode, the scheduler will enqueue the incoming crypto op burst
to the primary slave. When one or more crypto ops are failed to be
enqueued, they then will be enqueued to the secondary slave.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Packet-size based distribution mode is a scheduling mode works with 2
slaves, primary slave and secondary slave, and distribute the enqueued
crypto ops to them based on their data lengths. A crypto op will be
distributed to the primary slave if its data length equals or bigger
than the designated threshold, otherwise it will be handled by the
secondary slave.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
So far, the crypto performance application was only able to
test one buffer size and one burst size.
With this commit, multiple sizes can be passed, either as a range
of values or as a list of values.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
In order to simplify throughput and latency tests,
verify option has been removed from these and moved
as a separate test.
Signed-off-by: Sergio Gonzalez Monroy <sergio.gonzalez.monroy@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
HW based crypto drivers may only support limited number of
sessions per queue pair. This requires support for attaching
sessions to specific queue pair. New APIs are introduced to
attach/detach a session with/from a particular queue pair.
These are optional APIs.
Application can call attach API after creating a session
and can call detach API before deleting a session.
Application needs to check if max_nb_sessions_per_qp > 0,
then it should call the attach API.
max_nb_sessions_per_qp = 0 means infinite sessions per qp
Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Remove DPDK QAT sample app, in favour of the newer applications
that use the cryptodev library: ipsec-gw and l2fwd-crypto,
which has support for Intel QuickAssist devices.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This patch changes the device configuration API for rte_cryptodev_ops
function prototype, and update all cryptodev PMDs for this change.
Signed-off-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Follow the approach in the network devices overview,
for the feature matrix, so it improves readibility
and maintainability.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
When somebody use bad --optype with aead algorithms
segmentation fault could happen.
Fixes: f8be1786b1 ("app/crypto-perf: introduce performance test application")
Signed-off-by: Daniel Mrzyglod <danielx.t.mrzyglod@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
L2fwd-crypto app was creating an array of strings for the
supported algorithms, which was different from the strings
that are now in cryptodev.
Use the new API in cryptodev to parse the string from the user,
to get the algorithm enum, instead, so it is not necessary to add
a new supported algorithm in the cryptodev library and this app.
Signed-off-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Add a library designed to calculate latency statistics and report them
to the application when queried. The library measures minimum, average and
maximum latencies, and jitter in nano seconds. The current implementation
supports global latency stats, i.e. per application stats.
Signed-off-by: Reshma Pattan <reshma.pattan@intel.com>
Signed-off-by: Remy Horton <remy.horton@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
This patch adds a library that calculates peak and average data-rate
statistics. For ethernet devices. These statistics are reported using
the metrics library.
Signed-off-by: Remy Horton <remy.horton@intel.com>
This patch adds a new information metrics library. This Metrics
library implements a mechanism by which producers can publish
numeric information for later querying by consumers. Metrics
themselves are statistics that are not generated by PMDs, and
hence are not reported via ethdev extended statistics.
Metric information is populated using a push model, where
producers update the values contained within the metric
library by calling an update function on the relevant metrics.
Consumers receive metric information by querying the central
metric data, which is held in shared memory.
Signed-off-by: Remy Horton <remy.horton@intel.com>
After we configure QEMU we also need to call 'make' to build the binary.
This step is currently missing in the description and this patch fixes
it.
Signed-off-by: Jens Freimann <jfreiman@redhat.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
The ring and distributor reworks are done.
Fixes: a6619414e0 ("ring: make struct and macros type agnostic")
Fixes: 775003ad2f ("distributor: add new burst-capable library")
Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Deprecate the following functions:
- rte_set_log_level(), replaced by rte_log_set_global_level()
- rte_get_log_level(), replaced by rte_log_get_global_level()
- rte_set_log_type(), replaced by rte_log_set_level()
- rte_get_log_type(), replaced by rte_log_get_level()
The new functions provide a better control of the per-type log level,
and have a better name prefix (rte_log_).
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Introduce 2 new functions to support dynamic log types:
- rte_log_register(): register a log name, and return a log type id
- rte_log_set_level(): set the log level of a given log type
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
The reorganization of the mbuf structure induces an ABI breakage.
Bump the library version, and update the documentation accordingly.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This commit adds a section to the docs listing the event
device PMDs available.
It then adds the software eventdev PMD to the listed event
devices.
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Rename "rte_virtio_net.h" to "rte_vhost.h", to not let it be virtio
net specific.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
We used to use rte_vhost_driver_session_start() to trigger the vhost-user
session. It takes no argument, thus it's a global trigger. And it could
be problematic.
The issue is, currently, rte_vhost_driver_register(path, flags) actually
tries to put it into the session loop (by fdset_add). However, it needs
a set of APIs to set a vhost-user driver properly:
* rte_vhost_driver_register(path, flags);
* rte_vhost_driver_set_features(path, features);
* rte_vhost_driver_callback_register(path, vhost_device_ops);
If a new vhost-user driver is registered after the trigger (think OVS-DPDK
that could add a port dynamically from cmdline), the current code will
effectively starts the session for the new driver just after the first
API rte_vhost_driver_register() is invoked, leaving later calls taking
no effect at all.
To handle the case properly, this patch introduce a new API,
rte_vhost_driver_start(path), to trigger a specific vhost-user driver.
To do that, the rte_vhost_driver_register(path, flags) is simplified
to create the socket only and let rte_vhost_driver_start(path) to
actually put it into the session loop.
Meanwhile, the rte_vhost_driver_session_start is removed: we could hide
the session thread internally (create the thread if it has not been
created). This would also simplify the application.
NOTE: the API order in prog guide is slightly adjusted for showing the
correct invoke order.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Features could be changed after the feature negotiation. For example,
VHOST_F_LOG_ALL will be set/cleared at the start/end of live migration,
respecitively. Thus, we need a new callback to inform the application
on such change.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Rename "virtio-net" to "vhost" in the API comments and vhost prog guide.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
rename "virtio_net_device_ops" to "vhost_device_ops", to not let it
be virtio-net specific.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
They are virtio-net specific and should be defined inside the virtio-net
driver.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
We used to use rte_vhost_get_queue_num() for telling how many vrings.
However, the return value is the number of "queue pairs", which is
very virtio-net specific. To make it generic, we should return the
number of vrings instead, and let the driver do the proper translation.
Say, virtio-net driver could turn it to the number of queue pairs by
dividing 2.
Meanwhile, mark rte_vhost_get_queue_num as deprecated.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Assume there is an application both support vhost-user net and
vhost-user scsi, the callback should be different. Making notify
ops per vhost driver allow application define different set of
callbacks for different driver.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
The rte_eth_vhost_feature_disable/enable/get APIs are just a wrapper of
rte_vhost_feature_disable/enable/get. However, the later are going to
be refactored; it's going to take an extra parameter (socket_file path),
to let it be per-device.
Instead of changing those vhost-pmd APIs to adapt to the new vhost APIs,
we could simply remove them, and let vdev to serve this purpose. After
all, vdev options is better for disabling/enabling some features.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Introduce few APIs to set/get/enable/disable driver features.
Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
So far, virtio-user with vhost-user as the backend can only support
client mode. So when vhost user backend is down, i.e., unix socket
connection is broken, the connection cannot be re-connected. We will
forcely set the link state to be down.
Note: virtio-user with vhost-kernel as the backend still cannot
support lsc now as we fail to find a way to monitor the backend, tap
device, up/down events.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
For rxq interrupt, the device (backend driver) will notify driver
through callfd. Each virtqueue has a callfd. To keep compatible
with the existing framework, we will give these callfds to
interrupt thread for listening for interrupts.
Before that, we need to allocate intr_handle, and fill callfds
into it so that driver can use it to set up rxq interrupt mode.
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Update the "Virtio_user for Container Networking" doc, add the
"--file-prefix" option to testpmd in host and container to avoid
hugepage config file conflict.
Fixes: 50665deebd ("doc: add guide to use virtio-user for container networking")
Cc: stable@dpdk.org
Signed-off-by: Yong Wang <wang.yong19@zte.com.cn>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
This patch implements support for the Virtio MTU feature.
When negotiated, the host shares its maximum supported MTU,
which is used as initial MTU and as maximum MTU the application
can set.
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Yuanhan Liu <yuanhan.liu@linux.intel.com>
Add a CLI in testpmd to test the TC min bandwidth
setting.
Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This patch fixes a trivial typo in i40e documentation;
The comment about the behavior upon DPDK application quit was wrongly
titled as "after DPDK application exist" instead of "after DPDK
application exit", and this trivial patch fixes it.
Fixes: edf1b61831 ("doc: add limitations for i40e PMD")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
This patch exposes the following item fields through the flow command:
- MPLS label
- GRE protocol
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch adds MPLS and GRE items to generic rte flow.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This patch includes slowpath configuration and fastpath changes
to support LRO and TSO. A bit of revamping is needed in order
to make use of existing packet classification schemes in Rx fastpath
and for SG element processing in Tx.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Add limited support for ntuple filter and flow director configuration.
The filtering is based on 4-tuples viz src-ip, dst-ip, src-port,
dst-port. The mask fields, tcp_flags, flex masks, priority fields,
Rx queue drop etc are not supported.
Signed-off-by: Harish Patil <harish.patil@qlogic.com>
Updates the documentation and feature lists for the AVP PMD device.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Adds support for setting and clearing promiscuous mode on an AVP device.
When enabled the _mac_filter function will allow packets destined to any
MAC address to be processed by the receive functions.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Adds function required for receiving packets from the host application via
AVP device queues. Both the simple and scattered functions are supported.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Adds support for "dev_configure" operations to allow an application to
configure the device.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
This commit introduces the AVP PMD file structure without adding any actual
driver functionality. Functional blocks will be added in later patches.
Signed-off-by: Allain Legacy <allain.legacy@windriver.com>
Signed-off-by: Matt Peters <matt.peters@windriver.com>
Acked-by: Vincent Jardin <vincent.jardin@6wind.com>
Most ConnectX-3 adapters expose two physical ports on a single PCI bus
address.
Add a new port parameter allowing the user to choose
either or both physical ports to be used by the application.
This parameter is used as follows:
Selecting only the second port:
-w 00:00.0,port=1
Selecting both ports:
-w 00:00.0,port=0,port=1
If no parameter is given, the default behavior is unchanged: all ports
are probed.
Signed-off-by: Gaetan Rivet <gaetan.rivet@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Add a CLI to set some TCs' strict link priority mode
on a physical port.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add CLI to set a specific TC's max bandwidth
on a specific VF from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add CLI to set TCs' min bandwidth on a specific VF
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Add CLI to set a specific VF's TX max bandwidth
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Set some TCs to strict priority mode.
It's a global setting on a physical port.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Set a specific TC's max bandwidth on a VF.
User can call the API to set VF TC's max bandwidth
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Allocate all TCs' relative bandwidth (percentage) on
a specific VF.
It can be taken as relative min bandwidth setting.
User can call the API to set VF TC's min bandwidth
from PF.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Support setting VF max bandwidth from PF.
User can call the API on PF to set a specific VF's
max bandwidth.
Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
