Add efx_nic_hw_unavailable() routine to check for hardware presence
before continuing with NIC operations.
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
In SF bug 61297 it's been confirmed that the hardware does not always
calculate the TCP checksum correctly with TSO sends.
The value of the Total Length field (IPv4) or Payload Length field
(IPv6) is the critical factor. We're sufficiently confident that if
these fields are zero then the checksum will be calculated correctly.
The information may be used by the drivers to check if the workaround is
required when FATSOv2 is implemented.
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
The SFN driver's PartitionControl WMI object requires an API to parse
and filter partition data in TLV format, particularly for the Dynamic
Config partition. The ef10_nvram_buffer functions provide this
functionality but are tied to use with license partition only.
Modify functions so they are applicable to all TLV partitions and add
functions to support in-place tag modification.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Extend efx_mcdi_get_port_modes() to optionally pass on the default
port mode field. This provides a more direct way of handling the case
where the dynamic config does not specify the port mode than the
alternative of a lookup table indexed by MCFW subtype.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Functions to process the DHCP option list format used by the expansion
ROM config buffers, to support extracting and updating of individual
options.
The initial use case is the driver presenting the global and per-PF
options as separate items, with the driver implementing the
synchronization of global options across the configuration buffers
for all PFs.
Signed-off-by: Richard Houldsworth <rhouldsworth@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Size of provided memory should be consistent with specified size.
Fixes: dfb3b1ce15 ("net/sfc/base: import monitors access via MCDI")
Cc: stable@dpdk.org
Signed-off-by: Martin Harvey <mharvey@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Description of sensors is generated from firmware sources.
Signed-off-by: Martin Harvey <mharvey@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
No need for probe messages when a TxQ is too full for a post to be done.
Existing drivers check if there is room in the queue before posting
descriptors, even though efx_tx_qdesc_post() does the check itself.
The new SFN Windows driver doesn't perform the check before calling
efx_tx_qdesc_post(), but that means these probes can get frequently
printed out. It's normal driver behaviour so there's no need to print
an error.
Signed-off-by: Mark Spender <mspender@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Remove obsolete monitor types since Falcon SFN4000 series adapters
no longer supported by libefx.
Rename MCDI monitors to be consistent with YML.
The code may be simplified and generalized since only MCDI monitors
remain.
Signed-off-by: Martin Harvey <mharvey@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Fixes: 17551f6dff ("net/sfc/base: add API to control UDP tunnel ports")
Cc: stable@dpdk.org
Signed-off-by: Vijay Srivastava <vijays@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Move empty definitions for platform-specific annotations from efsys.h
to EFX headers.
Signed-off-by: Martin Harvey <mharvey@solarflare.com>
Signed-off-by: Andrew Lee <alee@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Add definitions of dynamic config and expansion ROM backup
partitions.
Signed-off-by: Paul Fox <pfox@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Functions declared in mcdi_mon.h are implemented in mcdi_mon.c.
The build fails if compiler options require declaration before definition.
Fixes: dfb3b1ce15 ("net/sfc/base: import monitors access via MCDI")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Required by GLD cstyle.
Fixes: d4f4b8f9d2 ("net/sfc/base: make RxQ type data an union")
Cc: stable@dpdk.org
Signed-off-by: Andy Moreton <amoreton@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
EF10 signed image layout header is generated from firmware sources.
Signed-off-by: Andrew Jackson <ajackson@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Found by PreFAST warnings.
Fixes: 3f2f0189dd ("net/sfc/base: add signed image layout support")
Cc: stable@dpdk.org
Signed-off-by: Martin Harvey <mharvey@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Found by PreFAST.
Fixes: 3f2f0189dd ("net/sfc/base: add signed image layout support")
Cc: stable@dpdk.org
Signed-off-by: Martin Harvey <mharvey@solarflare.com>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
'stats_reset()' callback was missing because the device backend doesn't
support it.
This commit adds a workaround to this and implements the callback by
taking a snapshot of the stats (SNAPSHOT) each time 'stats_reset()'
is called. When getting stats with 'stats_get()', hw stats which
always increase reduce SNAPSHOT stats.
That's how we get the "real" stats since the last 'stats_reset()'.
Signed-off-by: Yogev Chaimovich <yogev@cgstowernetworks.com>
Acked-by: Yong Wang <yongwang@vmware.com>
The MAC addresses are generated in a similar manner as in the TAP PMD,
where the address is based on the number of PCAP ports created.
This is useful for the purposes of debugging DPDK applications using
PCAP devices instead of real devices where multiple devices should still
have unique MAC addresses. This method was chosen over randomly
assigning MAC addresses to make the creation of pcaps, specifically
matching the destination ethernet address field to an interface, easier.
Signed-off-by: Cian Ferriter <cian.ferriter@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Releasing a queue that is already released by slave may cause a
segmentation fault. For example, after a successfull device
configuration a queue is set up. Afterwards the device is reconfigured
with an invalid argument, forcing slaves to release the queues
(e.g. rte_eth_dev.data.tx_queues). Finally the failsafe's queues
are released. The queue release functions also try to release slaves'
queues using ETH(sdev)->data->tx_queues which is NULL at the time.
Add checks for NULL slaves' Tx and Rx queues before releasing them.
Fixes: a46f8d584e ("net/failsafe: add fail-safe PMD")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Gaetan Rivet <gaetan.rivet@6wind.com>
IFCVF can help to log dirty page in live migration stage,
each queue's index can be read and configured to support
VHOST_USER_GET_VRING_BASE and VHOST_USER_SET_VRING_BASE.
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Tested-by: Xiaolong Ye <xiaolong.ye@intel.com>
Check the firmware status at init time. If the firmware is in
recovery mode, alert the user to check it.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Use ixgbe_identify_sfp_module_X550em to update SFP identification
flow. ixgbe_identify_sfp_module_X550em includes specific checks for
X550 about supported SFP modules.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Replace "=" operation with "|=" operation to only set the intended
register bits.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Add FM NVM recovery mode check. Allow the software to detect this.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Cleanup UNREFERENCED_1PARAMETER() macro because "hw" is used.
And remove Light Spring codes because the device was never
productised. And cleanup unused bypass codes.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Update the GPL and BSD license headers to use the SPDX License
Identifier instead.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
It's possible to have much more hugepage backed memory regions
than what vhost-kernel supports due to the memory hotplug, which
may cause problems. A better solution is to have the virtio-user
pass all the memory ranges reserved by DPDK to vhost-kernel.
Fixes: 12ecb2f63b ("net/virtio-user: support memory hotplug")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Recently some memory APIs were introduced to allow users to
get the file descriptor and offset for each memory segment.
We can leverage those APIs to get rid of the /proc magic on
memory table preparation in vhost-user backend.
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Deadlock can occur when allocating memory if a vhost-kernel
based virtio-user device is in use. To fix the deadlock,
we will take memory hotplug lock explicitly in virtio-user
when necessary, and always call the _thread_unsafe memory
functions.
Bugzilla ID: 81
Fixes: 12ecb2f63b ("net/virtio-user: support memory hotplug")
Cc: stable@dpdk.org
Reported-by: Seán Harte <seanbh@gmail.com>
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Tested-by: Seán Harte <seanbh@gmail.com>
Reviewed-by: Seán Harte <seanbh@gmail.com>
Reviewed-by: Anatoly Burakov <anatoly.burakov@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Management firmware does not properly clean IGU block in PF FLR flow
which may result in undelivered attentions for link events from
default status block.
Add a workaround in PMD to execute extra IGU cleanup right after PF FLR
is done.
Fixes: 9e2f08a4ad ("net/qede/base: add request for PF FLR before load request")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
This patch implement eth_dev_ops->rx_descriptor_status
callback.
Walk through receive completion ring to calculate receive
descriptors used by firmware and then provide the status of
offset accordingly.
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
- HW does not include CRC in received frame when passed to host,
so no need to consider CRC length while calculating Rx buffer size.
- In scattered Rx mode, driver may allocate Rx buffer larger than
the size of mbuf because it tries to adjust the buffer size to cache
line size by ceiling it. Fix this by flooring the size instead of
ceiling.
- Consider the rule imposed by HW regarding the minimum size of Rx buffer
in scattered Rx mode -
(MTU + Maximum L2 Header Size + 2) / ETH_RX_MAX_BUFF_PER_PKT
Fixes: f6033f2497 ("net/qede: fix minimum buffer size and scatter Rx check")
CC: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
- Add support for rte_flow_validate(), rte_flow_create() and
rte_flow_destroy() APIs
- This patch adds limited support for the flow items
because of the limited filter profiles supported by HW.
- Only 4 tuples - src and dst IP (v4 or v6) addresses and
src and dst port IDs of TCP or UDP.
- also, only redirect to queue action is supported.
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
- In order to prepare the base for RTE FLOW support,
convert common code used for flow director support
into common aRFS code.
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
- PMD does not fill vtc_flow field of IPv6 header while
constructing a packet for IPv6 filter. Hence filter was
not getting applied properly.
- IPv6 addresses got swapped while copying src and dst addresses.
- Same issue with UDP and TCP port ids.
Fixes: 622075356e ("net/qede: support ntuple and flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
When trust mode is set to ON, VF can change it's MAC address
inspite PF has set a forced MAC for that VF from HV.
Earlier similar functionality is provided by module parameter
"allow_vf_mac_change_mode" of qed.
This change makes few changes in behavior of VF shadow config -
- Let driver track the VF mac in shadow config as long as trust
mode is OFF.
- Once trust mode is ON, we should not care about MACs in shadow
config (because we never intend to fall back because of lack of restore
implementation).
- Delete existing shadow MAC (this helps when trust mode is turned OFF,
and VF tries to add new MAC – it won’t fail that time since we have
a clean slate).
- Skip addition and deletion of MACs in shadow configs.
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
Fix logic for sfp get rx_los, tx_fault, tx_disable, and sfp set tx_disable.
Fixes: bdc40630a8 ("net/qede/base: add APIs for xcvr")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Limit the number of non ethernet queues to 64, allowing a max queues to
status block ratio of 2:1 in case of storage target. Theoretically a
non-target storage PF can have 128 queues and SBs.
This change is to support 64 entries for a target iSCSI/FCoE PF and 128
for a non-target.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Fix to program the HW registers with proper ether type.
Fixes: 36f45bce25 ("net/qede/base: fix to support OVLAN mode")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Add support for the following OneView APIs:
- ecore_mcp_ov_update_mtu() - Send MTU value to the management FW.
- ecore_mcp_ov_update_mac() - Send MAC address to the management FW.
- ecore_mcp_ov_update_eswitch() - Send eswitch_mode to management FW
after the firmware load.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
This fix adds a ecore_mcp_update_stag() handler to handle the STAG update
events from management FW and program the STAG value.
It also clears the stag config on PF, when management FW invalidates
the stag value.
Fixes: ec94dbc573 ("qede: add base driver")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
The driver setting of "allow_experimental_apis" was not being used when
building the base code. To allow this we can manually put in a check
in the base code files for the setting and set the appropriate cflag
if it's needed.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Tested-by: Ilya Maximets <i.maximets@samsung.com>
If the device is not clearly reset by the previous driver and holds
some invalid ring addr, and the relay thread kicks it before HW is
properly re-configured, a bad DMA request may happen.
Besides, the notify_addr which is used by the relay thread is set in
the vdpa_ifcvf_start function, if a kick relay happens before
vdpa_ifcvf_start finishes, a null addr is accessed.
Fixes: a3f8150eac ("net/ifcvf: add ifcvf vDPA driver")
Cc: stable@dpdk.org
Signed-off-by: Xiao Wang <xiao.w.wang@intel.com>
Reviewed-by: Xiaolong Ye <xiaolong.ye@intel.com>
Remove driver log when no interrupt event indicated
in alarm handler for both PF and VF, otherwise there
will be lots of prints which makes console unusable.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
For IA, the AVX2 vector path is only recommended to be used on later
platforms (identified by AVX512 support, like SKL etc.) This is because
performance benchmark shows downgrade when running AVX2 vector path on
early platform (BDW/HSW) in some cases. But we still observe perf gain
with some real work loading.
So this patch introduced the new devarg use-latest-supported-vec to
force the driver always selecting the latest supported vec path. Then
apps are able to take AVX2 path on early platforms. And this logic can
be re-used if we will have AVX512 vec path in future.
This patch only affects IA platforms. The selected vec path would be
like the following:
Without devarg/devarg = 0:
Machine vPMD
AVX512F AVX2
AVX2 SSE4.2
SSE4.2 SSE4.2
<SSE4.2 Not Supported
With devarg = 1
Machine vPMD
AVX512F AVX2
AVX2 AVX2
SSE4.2 SSE4.2
<SSE4.2 Not Supported
Other platforms can also apply the same logic if necessary in future.
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Compile Mellanox driver when their external dependencies are met. A
glue version of the driver can still be requested by using the
-Denable_driver_mlx_glue=true
Meson will try to find the required external libraries. When they are
not installed system wide, they can be provided though CFLAGS, LDFLAGS
and LD_LIBRARY_PATH environment variables, example (considering
RDMA-Core is installed in /tmp/rdma-core):
# CLFAGS=-I/tmp/rdma-core/build/include \
LDFLAGS=-L/tmp/rdma-core/build/lib \
LD_LIBRARY_PATH=/tmp/rdma-core/build/lib \
meson output
# LD_LIBRARY_PATH=/tmp/rdma-core/build/lib \
ninja -C output install
Note: LD_LIBRARY_PATH before ninja is necessary when the meson
configuration has changed (e.g. meson configure has been called), in
such situation the LD_LIBRARY_PATH is necessary to invoke the
autoconfiguration script.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
Compile Mellanox driver when its external dependencies are met. A
glue version of the driver can still be requested by using the
-Denable_driver_mlx_glue=true
Meson will try to find the required external libraries. When they are
not installed system wide, they can be provided though CFLAGS, LDFLAGS
and LD_LIBRARY_PATH environment variables, example (considering
RDMA-Core is installed in /tmp/rdma-core):
# CLFAGS=-I/tmp/rdma-core/build/include \
LDFLAGS=-L/tmp/rdma-core/build/lib \
LD_LIBRARY_PATH=/tmp/rdma-core/build/lib \
meson output
# LD_LIBRARY_PATH=/tmp/rdma-core/build/lib \
ninja -C output install
Note: LD_LIBRARY_PATH before ninja is necessary when the meson
configuration has changed (e.g. meson configure has been called), in
such situation the LD_LIBRARY_PATH is necessary to invoke the
autoconfiguration script.
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
RSS configuration works for all e1000 NICs except 82576.
This patch fixes this issue by correcting queue number
in RSS configuration.
Fixes: 424ae915ba ("net/e1000: move RSS to flow API")
Fixes: ac8d22de23 ("ethdev: flatten RSS configuration in flow API")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Wei Zhao <wei.zhao1@intel.com>
Removing double copy of driver information. 04664e5c83 has shifted
that from driver's probe to bus's probe.
Fixes: 04664e5c83 ("drivers/bus: fill driver reference after NXP probing")
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
Removing double copy of driver information. 04664e5c83 has shifted
that from driver's probe to bus's probe.
Fixes: 04664e5c83 ("drivers/bus: fill driver reference after NXP probing")
Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>
The probing functions of NXP buses were missing to set
the driver used for successfully probing a device.
The NXP driver and the generic rte_driver are now set
in the device structures.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
The rte_afu_driver is assigned to rte_afu_device.driver during probing.
There is no need of accessing the rte_afu_driver via rte_device.driver
and type casting to its container.
Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Rosen Xu <rosen.xu@intel.com>
Note that the library built by meson will not have the _uio suffix:
librte_pmd_vmxnet3.so - as it follows the directory name, while the
legacy makefile rename it to librte_pmd_vmxnet3_uio.so.
Signed-off-by: Luca Boccassi <bluca@debian.org>
Versions of meson prior to 0.47 flattened the parameters to the
"set_variable" function, which meant that the function could not take
array variables as a parameter. Therefore, we need to disable driver
tracking for those older versions, in order to maintain compatibility
with the minimum supported 0.41 version, and also v0.45 shipped in
Ubuntu 18.04 release.
Fixes: 806c45dd48 ("build: add configuration summary at end of config")
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
Tested-by: Timothy Redaelli <tredaelli@redhat.com>
After running meson to configure a DPDK build, it can be useful to know
what was automatically enabled or disabled. Therefore, print out by way of
summary a categorised list of libraries and drivers to be built.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
This PMD is built with -Wno-format, which means GCC errors out if
-Wformat-security is used.
Fixes: e940646b20 ("drivers/net: build Intel NIC PMDs with meson")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
This PMD is built with -Wno-format, which means GCC errors out if
-Wformat-security is used.
Fixes: 56bb54ea1b ("raw/ifpga/base: add Intel FPGA OPAE share code")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Bruce Richardson <bruce.richardson@intel.com>
The QAT compression driver was named "qat".
Rename to compress_qat for consistency with other compressdev drivers
and with crypto_qat.
Signed-off-by: Fiona Trahe <fiona.trahe@intel.com>
Acked-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Comments says "no csum error report support" but there is no check
related csum offloads. Removing the comment.
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Integrate accelerated networking support into netvsc PMD.
This allows netvsc to manage VF without using failsafe or vdev_netvsc.
For the exception vswitch path some tests like transmit
get a 22% increase in packets/sec.
For the VF path, the code is slightly shorter but has no
real change in performance.
Pro:
* using netvsc is more like other DPDK NIC's
* the exception packet uses less CPU
* much smaller code size
* no locking required on VF transmit/receive path
* no legacy Linux network device to get mangled by userspace
* much simpler (1K vs 9K) LOC
* unified extended statistics
Con:
* using netvsc has more complex startup model
* no bifurcated driver support
* no flow support (since host does not have flow API).
* no tunnel offload support
* no receive interrupt support
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Implement callback functionality on link state changes.
This is not really driven off of interrupt file descriptor like most other
PMD's. Instead, it happens when a link state change message arrives
in the common ring buffer.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
If application sends faster than vswitch can keep up, then the
transmit descriptor pool will be exhausted. This is not a failure
so change the name statistic and don't include it in oerrors.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.
PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.
Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>
Bonding driver ignores the value of RSS key (that is set in the port RSS
configuration) in bond_ethdev_configure(). So the only way to set
non-default RSS key is by using rss_hash_update(). This is not an
expected behaviour.
Make the bond_ethdev_configure() set default RSS key only if
requested key is set to NULL.
Fixes: 734ce47f71 ("bonding: support RSS dynamic configuration")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Chas Williams <chas3@att.com>
Default Redirection Table that is set in bonding driver is distributed
evenly over all Rx queues only within every RETA group (the first RETA
entries in every group are always start with zero). But in the most
drivers, default RETA is distributed over all Rx queues without sequence
resets in the beginning of a new group, which implies more balanced
per-core load.
Change the default RETA to be evenly distributed over all Rx queues
considering the whole table.
Fixes: 734ce47f71 ("bonding: support RSS dynamic configuration")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Chas Williams <chas3@att.com>
Add flow operations to match packets based on destination MAC address.
Allocate and program hardware MPS table with the destination MAC
address to be matched against. The returned MPS index is then used while
offloading flows to LETCAM (maskfull) and HASH (maskless) filter regions.
Also update existing mac_addr_set() to use the new MPS table API.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add API to program and manage hardware Multi Port Switch table. MPS
holds destination MAC addresses to be matched against incoming packets
for further rule processing. Packets not matching any entry in MPS table
will be dropped by default, unless the underlying port is in promiscuous
mode.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add flow API operations to offload vlan push, pop, and rewrite actions.
For vlan push or rewrite actions, allocate and program an entry from
L2T table. Use the L2T index to program vlan actions for LETCAM
(maskfull) and HASH (maskless) filters.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Add API to program and manage hardware Layer 2 Table. L2T holds
information necessary to rewrite specific fields in packet, such
as destination MAC address and vlan id.
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
>From the Intel Ethernet Controller X710/XXV710/XL710 Specification
Update:
Starting from NVM 5.02, if the Set Local LLDP MIB command is
received while the DCBx specific agent is stopped, the command
returns an EPERM error. If the command is received while the
LLDP agent is stopped, it sets the local MIB without exchanging
LLDP with peer, and returns SUCCESS.
This results in the harmless, but annoying, diagnostic:
default dcb config fails. err = -53, aq_err = 1.
So, if possible (older firmwares cannot safely stop LLDP), stop the
LLDP daemon when we are in software mod before we attempt to call
i40e_set_dcb_config.
Signed-off-by: Chas Williams <chas3@att.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch adds alarm handler, and then i40e
PF will use alarm handler instead of interrupt
handler when device is started and Rx interrupt
mode is disabled. This way will save CPU cycles
during receiving packets.
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This patch checks negotiated features to see if necessary to offload
before set the tap device offload capabilities. It also checks if kernel
support the TUNSETOFFLOAD operation.
Fixes: 5e97e42025 ("net/virtio-user: enable offloading")
Cc: stable@dpdk.org
Signed-off-by: Eric Zhang <eric.zhang@windriver.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Rxq cq_ci was 16 bits while hardware is expecting to wrap
around 24 bits, this caused interrupt failure after burst of packets.
Fixes: 43e9d9794c ("net/mlx5: support upstream rdma-core")
Cc: stable@dpdk.org
Signed-off-by: Xueming Li <xuemingl@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
In case of a temporary failure the ixgbe driver can return the internal
error IXGBE_ERR_RESET_FAILED to the application. Instead, return
-EAGAIN as per the public API specification.
Fixes: cddaf87a1e ("lib: fix unused values")
Cc: stable@dpdk.org
Signed-off-by: Luca Boccassi <bluca@debian.org>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When bond slave devices cannot transmit all packets in bufs array,
tx_burst callback shall merge the un-transmitted packets back to
bufs array. Recent merge logic introduced a bug which causes
invalid mbuf addresses being written to bufs array.
When caller frees the un-transmitted packets, due to invalid addresses,
application will crash.
The fix is avoid shifting mbufs, and directly write un-transmitted
packets back to bufs array.
Fixes: 09150784a7 ("net/bonding: burst mode hash calculation")
Cc: stable@dpdk.org
Signed-off-by: Jia Yu <jyu@vmware.com>
Acked-by: Chas Williams <chas3@att.com>
Some NFP firmwares support live changes to the MAC address, but
this is not always true and the firmware advertises it accordingly.
This patch checks if firmware does not support live changes and
sets RTE_ETH_DEV_NOLIVE_MAC_ADDR in that case.
Cc: stable@dpdk.org
Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
Mark internal variables static to avoid potential redefinition
errors later on.
Signed-off-by: Natalie Samsonov <nsamsono@marvell.com>
Reviewed-by: Yelena Krivosheev <yelena@marvell.com>
Fix used_bpools array initialization by using range initializer.
This way all necessary variables are properly initialized regardless
of PP2_NUM_PKT_PROC value.
Fixes: 0ddc9b815b ("net/mrvl: add net PMD skeleton")
Cc: stable@dpdk.org
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Add MVEP (Marvell Embedded Processors) to drivers/common which
will keep code reused by current and future MRVL PMDs.
Right now we have only common DMA memory initialization routines there.
Signed-off-by: Liron Himi <lironh@marvell.com>
Signed-off-by: Tomasz Duszynski <tdu@semihalf.com>
Reviewed-by: Natalie Samsonov <nsamsono@marvell.com>
On the code after the below commits, the criteria to select the IPV4 or
IPV6 hash functions was the existence of some ETH_RSS_IPV4 RSS types on
the flow rule.
The check is wrong. For example ETH_RSS_NONFRAG_IPV4_TCP will not select
the IPV4 hash which will cause the packet to be spread in a bad way.
Fix it by adding the corresponding types needed for each hash selection.
Fixes: 592f05b29a ("net/mlx5: add RSS flow action")
Fixes: fd0b70316b ("net/mlx5: support inner RSS computation")
Cc: stable@dpdk.org
Reported-by: Yaroslav Brustinov <ybrustin@cisco.com>
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
On ConnectX-4 Lx the Multi Packet Send (MPW) feature is considered
un-secure, as on some cases were the application provides incorrect mbufs
on the Tx burst the host or NIC can get stuck.
Hence, disabling the feature by default for this specific NIC.
Users can still enable this feature and enjoy the performance gain
(mostly for low number of cores) by using the txq_mpw_en devarg.
This patch will impact the out of the box performance of some application
using ConnectX-4 Lx for the sack of security and robustness.
Since we need different defaults based on the underlying device the mpw
field in the configuration struct was extended to contain also the
MLX5_ARG_UNSET option.
Cc: stable@dpdk.org
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
LMTST does not guarantee packet content get synced with L2C when
HW access the packet for transmitting.
Adding coherent IO write barrier will make sure HW sees the correct
packet if its modified.
Fixes: 9e747589bd ("net/octeontx: add packet transmit burst function")
Cc: stable@dpdk.org
Reported-by: Vikas Aggarwal <vikas.aggarwal@caviumnetworks.com>
Signed-off-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
The event buffer was changed to be a fixed size value,
had a couple of issues. The big one is that rte_free was still
being called for a pointer that was not setup with rte_malloc().
The event buffer was also too small to handle heavy receive
traffic; and running the event buffer out would crash
the application.
Fix by going back to a dynamically resized event buffer.
And grow it by 25% to avoid lots of realloc's.
Fixes: 530af95a78 ("bus/vmbus: avoid signalling host on read")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Add tx_done_cleanup ethdev hook to allow application to
control if/when it wants completions to be handled.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Tune the vmbus connection so the host scans faster. This improves
transmit performance. The host default value is 100us but setting
to 50us reduces packet loss significantly.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Fix the error handling in setting up transmit buffer.
If setting up chimney buffer fails, then it is not connected so
no need to send disconnect.
Allow for some unused area if full area is not used.
Fixes: 4e9c73e96e ("net/netvsc: add Hyper-V network device")
Cc: stable@dpdk.org
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
We assume VLAN ethtertype is 0x8100 in get_vlan_offset() function,
but it could be 0x88A8 if QinQ is supported.
Fixes: 06fe78b98c ("bond: add mode 6")
Cc: stable@dpdk.org
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Acked-by: Chas Williams <chas3@att.com>
When a secondary process handles VDEV_SCAN_ONE mp action, it is possible
the device is already be inserted. This happens when we have multiple
secondary processes which cause multiple broadcasts from primary during
bus->scan. So we don't need to log any error for -EEXIST.
Bugzilla ID: 84
Fixes: cdb068f031 ("bus/vdev: scan by multi-process channel")
Cc: stable@dpdk.org
Reported-by: Gage Eads <gage.eads@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Gage Eads <gage.eads@intel.com>
This patch removes the forward declaration of rte_pci_remove_device()
method. In the past, this forward decalaration was needed for
rte_pci_detach(), which is now removed from pci_common.c.
Fixes: e690338a7b ("bus/pci: remove unused function to detach by address")
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
The size of Rx queue is determined by dividing the number of descriptors by
the number of strides. As device can't support single slot queue, if the
number of descriptors is same as the number of strides, MPRQ shouldn't be
enabled. Otherwise, this will cause HW fault. For example, if rxd is set to
512 with testpmd on ConnectX-4 Lx, PMD can't receive more than 512 packets
because the minimum number of strides for ConnectX-4 Lx is 512. Users have
to configure larger number of descriptors in this case.
Fixes: 7d6bf6b866 ("net/mlx5: add Multi-Packet Rx support")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
PMD did not pass down the intended queue id while
configuring the ntuple filter.
Fixes: 622075356e ("net/qede: support ntuple and flow director filter")
Cc: stable@dpdk.org
Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com>
The rte_flow meaning of zero flow mask configuration is to match all
the range of the item value.
For example, the flow eth / ipv4 dst spec 1.2.3.4 dst mask 0.0.0.0
should much all the ipv4 traffic from the rte_flow API perspective.
>From some kernel perspectives the above rule means to ignore all the
ipv4 traffic (e.g. Ubuntu 16.04, 4.15.10).
Due to the fact that the tap PMD should provide the rte_flow meaning,
it is necessary to ignore the spec in case the mask is zero when it
forwards such like flows to the kernel.
So, the above rule should be translated to eth / ipv4 to get the
correct meaning.
Ignore spec configurations when the mask is zero.
Fixes: de96fe68ae ("net/tap: add basic flow API patterns and actions")
Cc: stable@dpdk.org
Signed-off-by: Matan Azrad <matan@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
The host will notify netvsc device about failed UDP and TCP
checksum. Propagate that information into the mbuf.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
The Netvsc PMD was not filling in the packet type information.
Fixes: 4e9c73e96e ("net/netvsc: add Hyper-V network device")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
This function is not used by netvsc driver yet.
Still the code should handle case where device driver returns
zero (due to rescind).
Coverity issue: 302871
Fixes: 831dba47bd ("bus/vmbus: add Hyper-V virtual bus support")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Use strlcpy rather than strncpy to avoid any issues about
null termination.
Coverity issue 302859
Fixes: 831dba47bd ("bus/vmbus: add Hyper-V virtual bus support")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Fix bug reported by Coverity where directory being scanned was
not closed in error path (leaking file descriptor).
Coverity issue: 302848
Fixes: 831dba47bd ("bus/vmbus: add Hyper-V virtual bus support")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
This patch fixes sgl filling to handle offset
greater than first sgl segment
Fixes: 1947bd1858 ("compress/qat: support scatter-gather buffers")
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
Fixed lengths for src and dest buffers
Fixes: 32842f2a6d ("compress/qat: create FW request and process response")
Signed-off-by: Tomasz Jozwiak <tomaszx.jozwiak@intel.com>
Acked-by: Fiona Trahe <fiona.trahe@intel.com>
This commit fixes an offset check in decompression which was checking
destination offset size against dst data_len rather than checking
against dst pkt_len as required, to support single and multi-segment
buffers.
Fixes: 788e748d38 ("compress/isal: support chained mbufs")
Signed-off-by: Lee Daly <lee.daly@intel.com>
Acked-by: Pablo de Lara <pablo.de.lara.guarch@intel.com>
If MPRQ is enabled, a PMD-private mempool is allocated. For ConnectX-4 Lx,
the minimum number of strides is 512 which ConnectX-5 supports 8. This
results in quite small number of elements for the MPRQ mempool. For
example, if the size of Rx ring is configured as 512, only one MPRQ buffer
can cover the whole ring. If there's only one Rx queue is configured. In
the following code in mlx5_mprq_alloc_mp(), desc is 1 and obj_num will be
36 as a result.
desc *= 4;
obj_num = desc + MLX5_MPRQ_MP_CACHE_SZ * priv->rxqs_n;
However, rte_mempool_create_empty() has a sanity check to refuse large
per-lcore cache size compared to the number of elements. Cache flush
threshold should not exceed the number of elements of a mempool. For the
above example, the threshold is 32 * 1.5 = 48 which is larger than 36 and
it fails to create the mempool.
Fixes: 7d6bf6b866 ("net/mlx5: add Multi-Packet Rx support")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Multiple tunnel isn't allowed but MPLS over GRE should be accepted.
Fixes: a4a5cd21d2 ("net/mlx5: add flow MPLS item")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
mlx5_dev_ops_isolate doesn't have APIs for enabling/disabling allmulti
mode as it can't be enabled in flow isolation mode. If the function
pointers are null, librte APIs such as
rte_eth_allmulticast_enable/disable() fail to set the flag
(dev->data->all_multicast). The flag is used when starting traffic by
mlx5_traffic_enable(). When switching out of flow isolation mode, allmulti
mode will not be set even though it has been enabled.
Fixes: 0887aa7f27 ("net/mlx5: add new operations for isolated mode")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
mlx5_dev_ops_isolate doesn't have APIs for enabling/disabling promiscuous
mode as it can't be enabled in flow isolation mode. If the function
pointers are null, librte APIs such as rte_eth_promiscuous_enable/disable()
fail to set the flag (dev->data->promiscuous). The flag is used when
starting traffic by mlx5_traffic_enable(). When switching out of flow
isolation mode, promiscuous mode will not be set even though it has been
enabled.
Fixes: 0887aa7f27 ("net/mlx5: add new operations for isolated mode")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Don't signal host that receive ring has been read until all events
have been processed. This reduces the number of guest exits and
therefore improves performance.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
If the number of packets requested are already present in the
rx_ring then skip reading the ring buffer from the host.
If the ring between the poll and receive side is full, then don't
poll (let incoming packets stay on host).
If no more transmit descriptors are available, then still try and
flush any outstanding data.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Increase the size of the ring used to hold mbuf's received
but not processed. The default is now based off the size
of the receive mbuf pool not the number of sections from the host.
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
The internal receive ring should be freed with rte_ring_free
not rte_free.
Fixes: 4e9c73e96e ("net/netvsc: add Hyper-V network device")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Moved the link status validity check from the slave add to the slave
activation step. Otherwise slave add will fail for mode 4 if
the ports are all stopped but only one of them checked.
Removed activate slave call from slave add function.
Bugzilla ID: 52
Fixes: b77d21cc23 ("ethdev: add link status get/set helper functions")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Declan Doherty <declan.doherty@intel.com>
Race condition can appear in the bond_mode_8023ad_periodic_cb()
callback when bonding port is stopped, reconfigured and restarted.
Re-ordered calls in bond_ethdev_start() to have callback alarm set
after slave ports are reconfigured.
Fixes: 2efb58cbab ("bond: new link bonding library")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Chas Williams <chas3@att.com>
There are several tx/rx offload capabilities missing in AVF.
Add them in this patch since AVF supports them.
Fixes: 69dd4c3d08 ("net/avf: enable queue and device")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
This reverts commit 7546dc4a13.
In i40e FDIR PMD code for checking programming status,
when the action of add FDIR filter is ok, i40e NIC will
not write back to programming status descriptor, so if
PMD code check DD is not done after period of time dealy,
it means the add or remove filter action is ok. It only write
back descriptor when fail. So, there is no issue for the original
code.
Fixes: 7546dc4a13 ("net/i40e: fix check of flow director programming status")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
This commit fixes an infinite loop bug that could occur
if the i40e AVX2 driver is used, and high traffic rates
cause the mempool from which the rxq pulls mbufs to become
empty.
The result would be an infinite loop of checking if we
should perform an rx rearm, calling the function and an
error return due the the mempool being emtpy.
The fix is to align the code in the AVX2 driver with the
SSE driver, where an if() is used instead of a while(),
allowing the thread to return from i40e rx function even
if the mempool is empty.
Fixes: dafadd7376 ("net/i40e: add AVX2 Rx function")
Cc: stable@dpdk.org
Reported-by: David Coyle <david.coyle@intel.com>
Signed-off-by: Harry van Haaren <harry.van.haaren@intel.com>
Acked-by: Brendan Ryan <brendan.ryan@intel.com>
Tested-by: David Coyle <david.coyle@intel.com>
There's parsing error when using device argument
support-multi-driver or queue-num-per-vf or both.
Error log is "PMD: Error parsing device, invalid
key <support-multi-driver>" and "PMD: Error parsing
device, invalid key <queue-num-per-vf>". The root
cause is that device argument will be parsed in
different parsing functions with local valid key .
This patch fixes the issue by combine all supported
arguments's valid keys.
Fixes: cfdfca493c ("net/i40e: fix multiple driver support")
Fixes: ee653bd800 ("net/i40e: determine number of queues per VF at run time")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
TC message for VLAN POP is broken due to an unfinished nested attribute.
Fixes: 7ac6778d50 ("net/mlx5: add VLAN item and actions to switch flow rules")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
VLAN ID is not properly translated to TC due to swapped byte order.
Fixes: 7ac6778d50 ("net/mlx5: add VLAN item and actions to switch flow rules")
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
This commit fixes a segmentation fault observed when configuring
mlx5 with RSS flow rule containing invalid queues indices such as
negative numbers, queue numbers bigger than the number Rx queues the
PMD or has no queues at all.
Fixes: 592f05b29a ("net/mlx5: add RSS flow action")
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
When running testpmd with an mlx5 device and then executing at testpmd
prompt in a raw: "port start all" followed by "port stop all"
a new file named /var/tmp/net_mlx5_<socket num> is created as a result
of creating a new unix domain socket (used for communication between
the primary and secondary processes).
When the new unix socket file is created the old unix socket file should
have been removed. This commit fixes it by closing the old unix socket
just before creating the new one in function mlx5_socket_init()
Fixes: f8b9a3bad4 ("net/mlx5: install a socket to exchange a file descriptor")
Cc: stable@dpdk.org
Signed-off-by: Ophir Munk <ophirmu@mellanox.com>
The below commit has added a graph based expansion logic for RSS rule to
satisfy Verbs requirements. With this logic, for example, the rule:
flow create 0 ingress pattern eth / end actions rss queues 0 1 end types
ipv4-tcp ipv6-tcp end / end
will be expanded into the rules:
flow create 0 ingress pattern eth / ipv4 / tcp / end actions rss queues 0 1
end types ipv4-tcp ipv6-tcp end / end
flow create 0 ingress pattern eth / ipv6 / tcp / end actions rss queues 0 1
end types ipv4-tcp ipv6-tcp end / end
flow create 0 ingress pattern eth / end actions queue index 0 / end
The below commit defined two graphs:
1. graph for the tunnel case which starts from the ETH item
2. graph for the non-tunnel case which starts from the ETH item
The graphs are ignoring the VLAN case. Hence rules with VLAN item will
fail to traverse the graph and it will result in flow rule creation error.
Adding the VLAN item to the existing graphs will not work as the flow
engine will reject any VLAN item without a specific vid.
To solve this case two new graphs were added (for the tunnel and
non-tunnel case) which contain the VLAN item and are being used only
when the VLAN item exists in the flow pattern.
Two cases left un-covered for the inner RSS:
1. The case were VLAN exists in the pattern as part of the inner headers
2. The case were VLAN exists in the pattern both in the outer and the
inner headers
Solving those cases will require to add two more graphs.
Holding a VLAN for the overlay network is not common, the subnets are
usually defined by the tunnel protocol, for example the VXLAN vni.
Hence adding those two graphs seems like an overkill at this point.
Based on needs one can add those to provide the full support.
Fixes: 592f05b29a ("net/mlx5: add RSS flow action")
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
There are dedicated QP attributes, tunnel offload flag and mask, which
must be configured in order to allow part of the HW tunnel offloads.
So, if a QP is pointed by a tunnel flow, the above QP attributes
should be configured.
The mask configuration is wrongly only performed if an internal RSS was
configured by the user, while there is no reason to condition the
tunnel offloads in RSS configurations.
Consequently, some of the tunnel offloads was not performed by the HW
when a tunnel flow was configured, for example, the packet tunnel
types was not reported to the user.
Replace the internal RSS condition with the tunnel flow condition.
Fixes: df6afd377a ("net/mlx5: remove useless arguments in hrxq API")
Signed-off-by: Matan Azrad <matan@mellanox.com>
Stripping binaries at build time is usually a bad thing since it makes
impossible to generate (split) debug symbols and this can lead to a more
difficult debugging.
Fixes: 59b91bec12 ("net/mlx5: spawn rdma-core dependency plug-in")
Cc: stable@dpdk.org
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
Stripping binaries at build time is usually a bad thing since it makes
impossible to generate (split) debug symbols and this can lead to a more
difficult debugging.
Fixes: 27cea11686 ("net/mlx4: spawn rdma-core dependency plug-in")
Cc: stable@dpdk.org
Signed-off-by: Timothy Redaelli <tredaelli@redhat.com>
Acked-by: Luca Boccassi <bluca@debian.org>
Acked-by: Christian Ehrhardt <christian.ehrhardt@canonical.com>
According to commit fb8fd96d42 ("ethdev: add shared counter to flow
API") the counter id should be taken into account only when the shared
flag is set.
Fixes: 60bd8c9747 ("net/mlx5: add count flow action")
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
This patch verifies that the number of Rx queues configured for RSS
is supported by the device hardware.
RSS support in mlx4 requires contiguous chunk of QPs to be reserved,
there is a hardware limitation on the amount of contiguous QPs which
is reported by the hardware. Ignoring this value will cause Rx queues
creation to fail.
Cc: stable@dpdk.org
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Currently only one buffer pool is configured and in use,
looping for up to maxmum 8 times is unnecessary and might
be buggy as assigned uninititalized values.
The fix is to loop for the configured times with initialize
with valid values.
Fixes: 16bbc98a3e ("bus/fslmc: update MC to 10.3.x")
Cc: stable@dpdk.org
Signed-off-by: Gavin Hu <gavin.hu@arm.com>
Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
Acked-by: Shreyansh Jain <shreyansh.jain@nxp.com>
We were using LICENSE.bnx2x_pmd to reference inclusion of SPDX licensing
tag from all the source file. Remove the LICENSE.bnx2x_pmd file and
directly include SPDX tags in source files.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Originally the PMD had "QLogic Corporation" copyright. When we submitted
commit e3de5dad2a ("net/bnx2x: change copyright info to Cavium"),
the "Qlogic Corporation" copyright was accidentally replaced
with "Cavium Inc". So now we see multiple Cavium copyright messages.
We're changing it to "Broadcom Corporation" copyright.
Fixes: e3de5dad2a ("net/bnx2x: change copyright info to Cavium")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
The PMD has been modified to invoke the polling function in the link
management code which detects the peer speed/mode, configure the link
and update the status accordingly. This patch is the fix for the link
down issue seen when we do dev_stop() and dev_start() from an
application.
Fixes: 540a211084 ("bnx2x: driver core")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
This patch fixes firmware command timeout error seen during device stop
while stopping queues. It patially reverts an earlier preventive change
commit 91b7e432bc ("net/bnx2x: disable fast path interrupts") to now
enable fast path interrupts.
The original issue of performance degradation is not observed anymore,
with or without the fix.
Fixes: 91b7e432bc ("net/bnx2x: disable fast path interrupts")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Treat any attention which is not for timeout event as invalid
and return status accordingly. The HW error handler logs and clears
the HW attention. Without this fix we can see flood of GRC attentions.
Fixes: e6051bd6b0 ("qede: add interrupt handling support")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
VDMs may cause the was_error indication to be set after the driver
clears it. Clear the indication after the internal FID_enable for
the PF is set.
Fixes: 60c78a5e25 ("net/qede/base: fix recovery from previous ungraceful exit")
Cc: stable@dpdk.org
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
The reta_size being indicated in the bnxt_dev_info_get_op was incorrect.
Set it to the value supported by the hardware.
Fixes: 0a6d2a7200 ("net/bnxt: get device infos")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
Tested-by: Randy Schacher <stuart.schacher@broadcom.com>
Firmware can restrict access to certain resources in the hardware
depending on various factors. In such cases when the PMD tries to
configure these resources the firmware will return
HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED error. Parse this and return
the standard EACCES error to the applications.
Fixes: 804e746c7b ("net/bnxt: add hardware resource manager init code")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
In bnxt_hwrm_flash_nvram, before attempting to allocate a buffer
we are grabbing the rte_spinlock. And if the allocation fails we
are returning before releasing the spinlock. We avoid the situation
by calling HWRM_PREP which grabs the lock after the buffer is
allocated successfully.
Fixes: 19e6af01bb ("net/bnxt: support get/set EEPROM")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
In some cases we may not be freeing up memory allocated for certain
NVM commands because the code might have bailed out before reaching
rte_free(). This patch moves some code around to ensure the allocated
memory is freed before exiting the function.
Fixes: 19e6af01bb ("net/bnxt: support get/set EEPROM")
Cc: stable@dpdk.org
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Michael Wildt <michael.wildt@broadcom.com>
Reviewed-by: Randy Schacher <stuart.schacher@broadcom.com>
bnxt_clear_hwrm_vnic_filters() was removing the created filter from HW,
but not clearing the internal data structures by removing it from the
struct bnxt_vnic_info->filter list.
Fixes: 5ef3b79fdf ("net/bnxt: support flow filter ops")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Control queues can not be allocated for VFs. So, add check to
only allocate control queues for PFs. This fixes adapter crash
when an attempt is made to allocate control queues for VFs.
Fixes: 3a3aaabc ("net/cxgbe: add control queue to communicate filter requests")
Signed-off-by: Shagun Agrawal <shaguna@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
The NIC persists the vxlan port number across vNIC init/de-init
(e.g. restart testpmd). So, explicitly reset the setting to the
default value (4789) as part of the initialization.
Fixes: 8a4efd1741 ("net/enic: add handlers to add/delete vxlan port number")
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
This reverts the patch that enabled mbuf fast free.
There are two main reasons.
First, enic_fast_free_wq_bufs is broken. When
DEV_TX_OFFLOAD_MBUF_FAST_FREE is enabled, the driver calls this
function to free transmitted mbufs. This function currently does not
reset next and nb_segs. This is simply wrong as the fast-free flag
does not imply anything about next and nb_segs.
We could fix enic_fast_free_wq_bufs by making it to call
rte_pktmbuf_prefree_seg to reset the required fields. But, it negates
most of cycle saving.
Second, there are customer applications that blindly enable all Tx
offloads supported by the device. Some of these applications do not
satisfy the requirements of mbuf fast free (i.e. a single pool per
queue and refcnt = 1), and end up crashing or behaving badly.
Fixes: bcaa54c1a1 ("net/enic: support mbuf fast free offload")
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
On dev_stop the Rx/Tx_burst functions are being set to NULL, this causes
a SEGFAULT in cases where control path calls stop and a paket is still
being processed by a worker.
Instead clear the fastpath functions in dev_close.
Fixes: da6c687471 ("net/octeontx: add start and stop support")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add the missing param "server" to param string.
Also add the missing spaces after params.
Fixes: bd8f50a45d ("net/virtio-user: support server mode")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
This macro isn't used any more after below commit:
Fixes: a4996bd89c ("ethdev: new Rx/Tx offloads API")
Cc: stable@dpdk.org
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com>
This reverts commit d4774a568b.
The patch is incomplete because kernel 4.16+, while being capable
of mapping MSI-X BARs, will also report if such a capability is
available. Without checking this capability, gratuitous errors
are displayed on kernels <4.16 while VFIO is attempting to mmap
MSI-X BAR and fails, which can be confusing to the user.
Fixes: d4774a568b ("vfio: fix workaround of BAR mapping")
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
This patch fixes a trivial typo in pci_common.c.
Fixes: 23eaa9059e ("bus/pci: use given name as generic name")
Cc: stable@dpdk.org
Signed-off-by: Rami Rosen <rami.rosen@intel.com>
Acked-by: John McNamara <john.mcnamara@intel.com>
Modifying port state is not necessary when starting/stopping Rx adapter
as it is same as starting/stopping ethdev.
Fixes: 45a914c5bd ("event/octeontx: support event Rx adapter")
Cc: stable@dpdk.org
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Calling rte_eth_dev_info_get() on secondary process cause a crash
because eth_dev->device is not set properly.
Fixes: ee27edbe0c ("drivers/net: share vdev data to secondary process")
Cc: stable@dpdk.org
Reported-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>
addressing a gcc 4.7.2 bug that cannot be reproduced with latter
versions:
"bin/ld: Warning: alignment 8 of symbol `mlx5_glue' in
src/dpdk/drivers/net/mlx5/mlx5_glue.c.21.o is smaller than 16 in
src/dpdk/drivers/net/mlx5/mlx5_rxq.c.21.o"
Fix it be forcing the alignment of the glue lib.
Fixes: 0e83b8e536 ("net/mlx5: move rdma-core calls to separate file")
Cc: stable@dpdk.org
Signed-off-by: Yaroslav Brustinov <ybrustin@cisco.com>
Signed-off-by: Shahaf Shuler <shahafs@mellanox.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Network interface indices being unsigned, an invalid index or error is
normally expressed through a zero value (see if_nametoindex()).
mlx5_ifindex() has a signed return type for negative values in case of
error. Since mlx5_nl.c does not check for errors, these may be fed back as
invalid interfaces indices to subsequent system calls. This usage would
have been correct if mlx5_ifindex() returned a zero value instead.
This patch makes mlx5_ifindex() unsigned for convenience.
Fixes: ccdcba53a3 ("net/mlx5: use Netlink to add/remove MAC addresses")
Cc: stable@dpdk.org
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Querying a counters on a flow without counter is ending with a
segmentation fault.
Fixes: 60bd8c9747 ("net/mlx5: add count flow action")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
If one of (*priv->rxqs)[] is null, the for loop can iterate infinitely as
idx can't be increased.
Fixes: cd24d52639 ("net/mlx5: add mark/flag flow action")
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Route Netlink message socket is wrongly initialized by registering to
the route link group. This causes the socket to receive all link
message related to routes whereas the PMD do not expect to receive such
information. In some situation it ends by filling the socket at a point
that any new message cannot be exchanged.
As the PMD is not expected to process such broadcast messages, the
parameter in the nl_group in the function is also remove.
Fixes: ccdcba53a3 ("net/mlx5: use Netlink to add/remove MAC addresses")
Cc: stable@dpdk.org
Signed-off-by: Zijie Pan <zijie.pan@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
There should be at least one Tx CQE remained if Tx WQ and txq->elts[] have
available slots to send a packet because the size of Tx CQ is exactly
calculated from the size of other resources. As it is guaranteed, it is
checked by an assertion.
max_elts is checked after the assertion for Tx CQ. If no slot is available
in txq->elts[], the assertion would be wrong.
Fixes: 2eefbec531 ("net/mlx5: add missing sanity checks for Tx completion queue")
Fixes: 6ce84bd889 ("net/mlx5: add enhanced multi-packet send for ConnectX-5")
Cc: stable@dpdk.org
Signed-off-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Xueming Li <xuemingl@mellanox.com>
On systems where the required Netlink commands are not supported but
Mellanox OFED is installed, representors information must be retrieved
through sysfs.
Fixes: 26c08b979d ("net/mlx5: add port representor awareness")
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
In mlx5_traffic_enable() the TCI mask for the VLAN is wrong causing the
sub flow engine to reject the rule.
Fixes: 272733b5eb ("net/mlx5: use flow to enable unicast traffic")
Cc: stable@dpdk.org
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Acked-by: Ori Kam <orika@mellanox.com>
This commit fixes compilation errors due to missing definitions
found when compiling mlx5 PMD from DPDK 17.11-LTS on Ubuntu 12.4
with kernel 3.15.
Fixes: 75ef62a943 ("net/mlx5: fix link speed capability information")
Fixes: 5bfc9fc112 ("net/mlx5: use static assert for compile-time sanity checks")
Cc: stable@dpdk.org
Signed-off-by: Moti Haimovsky <motih@mellanox.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
This enables flow rules to match traffic coming from a different DPDK port
ID associated with the device (PORT_ID pattern item), mainly for the
convenience of applications that want to deal with a single port ID for all
flow rules associated with some physical device.
Testpmd example:
- Creating a flow rule on port ID 1 to consume all traffic from port ID 0
and direct it to port ID 2:
flow create 1 ingress transfer pattern port_id id is 0 / end actions
port_id id 2 / end
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This enables flow rules to explicitly match VLAN traffic (VLAN pattern
item) and perform various operations on VLAN headers at the switch level
(OF_POP_VLAN, OF_PUSH_VLAN, OF_SET_VLAN_VID and OF_SET_VLAN_PCP actions).
Testpmd examples:
- Directing all VLAN traffic received on port ID 1 to port ID 0:
flow create 1 ingress transfer pattern eth / vlan / end actions
port_id id 0 / end
- Adding a VLAN header to IPv6 traffic received on port ID 1 and directing
it to port ID 0:
flow create 1 ingress transfer pattern eth / ipv6 / end actions
of_push_vlan ethertype 0x8100 / of_set_vlan_vid vlan_vid 42 /
port_id id 0 / end
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This enables flow rules to explicitly match supported combinations of
Ethernet, IPv4, IPv6, TCP and UDP headers at the switch level.
Testpmd example:
- Dropping TCPv4 traffic with a specific destination on port ID 2:
flow create 2 ingress transfer pattern eth / ipv4 / tcp dst is 42 / end
actions drop / end
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
This patch enables creation of rte_flow rules that direct matching traffic
to a different port (e.g. another VF representor) or drop it directly at
the switch level (PORT_ID and DROP actions).
Testpmd examples:
- Directing all traffic to port ID 0:
flow create 1 ingress transfer pattern end actions port_id id 0 / end
- Dropping all traffic normally received by port ID 1:
flow create 1 ingress transfer pattern end actions drop / end
Note the presence of the transfer attribute, which requests them to be
applied at the switch level. All traffic is matched due to empty pattern.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
Because mlx5 switch flow rules are configured through Netlink (TC
interface) and have little in common with Verbs, this patch adds a separate
parser function to handle them.
- mlx5_nl_flow_transpose() converts a rte_flow rule to its TC equivalent
and stores the result in a buffer.
- mlx5_nl_flow_brand() gives a unique handle to a flow rule buffer.
- mlx5_nl_flow_create() instantiates a flow rule on the device based on
such a buffer.
- mlx5_nl_flow_destroy() performs the reverse operation.
These functions are called by the existing implementation when encountering
flow rules which must be offloaded to the switch (currently relying on the
transfer attribute).
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
With mlx5, unlike normal flow rules implemented through Verbs for traffic
emitted and received by the application, those targeting different logical
ports of the device (VF representors for instance) are offloaded at the
switch level and must be configured through Netlink (TC interface).
This patch adds preliminary support to manage such flow rules through the
flow API (rte_flow).
Instead of rewriting tons of Netlink helpers and as previously suggested by
Stephen [1], this patch introduces a new dependency to libmnl [2]
(LGPL-2.1) when compiling mlx5.
[1] https://mails.dpdk.org/archives/dev/2018-March/092676.html
[2] https://netfilter.org/projects/libmnl/
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Acked-by: Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
Acked-by: Yongseok Koh <yskoh@mellanox.com>
While deleting the elements from the linked list, TAILQ_FOREACH causes
read from the freed pointer. Fixes the issue by using TAILQ_FOREACH_SAFE
instead.
Coverity issue: 302867
Fixes: bef50bcb1c ("net/softnic: implement start and stop")
Signed-off-by: Jasvinder Singh <jasvinder.singh@intel.com>
Acked-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Setting up the bonding options before calling rte_eth_dev_probing_finish
triggers an invalid port id error because of port state not set, or set
unused
Fixes: fbe90cdd77 ("ethdev: add probing finish function")
Cc: stable@dpdk.org
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Acked-by: Chas Williams <chas3@att.com>
Add missing NULL point check inside ixgbe_pf_host_uninit, or it may cause
segment fault when detaching a device.
Fixes: cf80ba6e20 ("net/ixgbe: add support for representor ports")
Cc: stable@dpdk.org
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
Acked-by: Remy Horton <remy.horton@intel.com>
remove queue id checks from dev_ops
ixgbe_dev_[rx/tx]_queue_[start/stop]
queue id checks already done by ethdev APIs that are calling these
dev_ops
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
remove queue id checks from dev_ops
fm10k_dev_[rx/tx]_queue_[start/stop]
queue id checks already done by ethdev APIs that are calling these
dev_ops
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
remove queue id checks from dev_ops
i40e_dev_[rx/tx]_queue_[start/stop]
i40evf_dev_[rx/tx]_queue_[start/stop]
queue id checks already done by ethdev APIs that are calling these
dev_ops
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Return value equal to zero means success and really expected.
Fixes: 0fa0070e43 ("net/sfc: support multicast addresses list controls")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
This feature is used to offload stripping of VLAN header from received
packets and update vlan_tci field in mbuf when
DEV_RX_OFFLOAD_VLAN_STRIP & ETH_VLAN_STRIP_MASK flag is set.
Signed-off-by: Rakesh Kudurumalla <rkudurumalla@caviumnetworks.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Set the rx and tx queue state appropriately when the queues or device are
started or stopped. This enables usage of the ethdev rx/tx queue start/stop
functions with the PCAP PMD.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Ferruh Yigit <ferruh.yigit@intel.com>
Set the rx and tx queue state appropriately when the queues or device
are started or stopped.
Signed-off-by: Gage Eads <gage.eads@intel.com>
Acked-by: Keith Wiles <keith.wiles@intel.com>
CRC_STRIP offload is always enabled, but lost here.
It is more robust to use device level offloads directly to
compose returned value.
Fixes: ff6a1197c3 ("net/sfc: convert to new Rx offload API")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
Rx checksum offloads are on device level and should be checked and
enforced on device level.
Avoid logging of Rx checksum offloads enforced for each Rx queue.
Fixes: ff6a1197c3 ("net/sfc: convert to new Rx offload API")
Cc: stable@dpdk.org
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ivan Malov <ivan.malov@oktetlabs.ru>
enic_set_mtu always reverts to the default Rx handler after changing
MTU. Try to use the simpler, non-scatter handler in this case as well.
Fixes: 35e2cb6a17 ("net/enic: add simple Rx handler")
Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
Fallback to filter with VLAN=0 if match without VLAN is not supported
Strictly speaking it is not 100% equivalent, but good tradeoff -
untagged and priority only tagged frames will match.
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Now exception logic handles these cases:
When FW variant does not support filters with transport ports, but
IP protocol filters are supported, TCP/UDP protocol filters may be
used. When FW variant does not support filters with IPv4/6 addresses
or IP protocol, but filters with EtherType are supported, IPv4 and
IPv6 EtherTypes may be used
Fixes: 096dba799b ("net/sfc: avoid creation of ineffective flow rules")
Cc: stable@dpdk.org
Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
We were using LICENSE.qede_pmd to reference inclusion of SPDX licensing
tag from all the source file. Remove the LICENSE.qede_pmd file and
directly include SPDX tags in source files.
Signed-off-by: Rasesh Mody <rasesh.mody@cavium.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Avoid sq door bell write on zero packet case to reduce additional
traffic on register bus.
Fixes: 1c421f18e0 ("net/thunderx: add single and multi-segment Tx")
Cc: stable@dpdk.org
Signed-off-by: Kiran Kumar <kkokkilagadda@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Add decode logic for new flash parts shipped with new Chelsio NICs
to fix initialization failure on these NICs.
Cc: stable@dpdk.org
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
In i40e FDIR PMD code for checking programming status
function i40e_check_fdir_programming_status(), the initial value
of return value ret should be set to -1 not 0, because if DD bit of
I40E_RX_DESC_STATUS_DD is not write back, this function will return
0 to upper function, this give an error info to upper function, the
fact for this is it is time out for DD write back and it should return
-1.
Fixes: 05999aab4c ("i40e: add or delete flow director")
Cc: stable@dpdk.org
Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
When link needs to go up, I40E_AQ_PHY_AN_ENABLED is always be set in DPDK.
So all speeds are always set. This causes speed config never works.
This patch fixes this issue and only allows to set available speeds. If
link needs to go up and speed setting is not supported, it will print
warning and set default available speeds. And when link needs to go down,
link speed field should be set to non-zero to avoid link down issue when
binding back to kernel driver.
Fixes: ca7e599d45 ("net/i40e: fix link management")
Fixes: 1bb8f66116 ("net/i40e: fix link down and negotiation")
Cc: stable@dpdk.org
Signed-off-by: Xiaoyun Li <xiaoyun.li@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
Currently, i40e_dev_tx_queue_setup_runtime checks simple tx and treats
mbuf fast free offloading as No-simple, which is classified as simple tx
in i40e_set_tx_function_flag. This inconsistent behavior causes tx queue
setup fail after queue was stopped. This patch fixes this bug.
Fixes: 399421100e ("net/i40e: fix missing mbuf fast free offload")
Cc: stable@dpdk.org
Signed-off-by: Shaopeng He <shaopeng.he@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
TPID can be set by set_switch_config AdminQ command on
new FW release. But find fail to set 0x88A8 on some NICs.
According to the datasheet, Switch Tag value should not
be identical to either the First Tag or Second Tag values.
So set something other than common Ethertype for internal
switching.
Fixes: 73cd7d6dc8 ("net/i40e: use set switch AQ instead of register setting")
Cc: stable@dpdk.org
Signed-off-by: Beilei Xing <beilei.xing@intel.com>
Acked-by: Qi Zhang <qi.z.zhang@intel.com>
